to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
These are general purpose "utility" classes, whose functionality is not
debugger-specific in any way. As such, I believe they belong in the
Utility module.
This doesn't break any particular dependency (yet), but it reduces the
number of Core dependencies across the board.
Reviewers: zturner, jingham, teemperor, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D55361
llvm-svn: 349157
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
Summary:
D48465 is currently blocked by the fact that tab-completing the first expression is deadlocking LLDB.
The reason for this deadlock is that when we push the ProcessIO handler for reading the Objective-C runtime
information from the executable (which is triggered when we parse the an expression for the first time),
the IOHandler can't be pushed as the Editline::Cancel method is deadlocking.
The deadlock in Editline is coming from the m_output_mutex, which is locked before we go into tab completion.
Even without this lock, calling Cancel on Editline will mean that Editline cleans up behind itself and deletes the
current user-input, which is screws up the console when we are tab-completing at the same time.
I think for now the most reasonable way of fixing this is to just not call Cancel on the current IOHandler when we push
the IOHandler for running an internal utility function.
As we can't really write unit tests for IOHandler itself (due to the hard dependency on an initialized Debugger including
all its global state) and Editline completion is currently also not really testable in an automatic fashion, the test for this has
to be that the expression command completion in D48465 doesn't fail when requesting completion the first time.
A more precise test plan for this is:
1. Apply D48465.
2. Start lldb and break in some function.
3. Type `expr foo` and press tab to request completion.
4. Without this patch, we deadlock and LLDB stops responding.
I'll provide an actual unit test for this once I got around and made the IOHandler code testable,
but for now unblocking D48465 is more critical.
Thanks to Jim for helping me debugging this.
Reviewers: jingham
Reviewed By: jingham
Subscribers: emaste, clayborg, abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D50912
llvm-svn: 340988
This change improves the logging for the lldb.module category to note a few interesting cases:
1. Local object file found, but specs not matching
2. Local object file not found, using a placeholder module
The handling and logging for the cases wehre we fail to load compressed dwarf
symbols is also improved.
Differential Revision: https://reviews.llvm.org/D50274
llvm-svn: 339161
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
Occasionally, when launching a process in lldb (especially on windows, but not limited to), lldb will hang before the process is launched and it will never recover. This happens because the timing of the processing of the state changes can be slightly different. The state changes that are issued are:
1) SetPublicState(eStateLaunching)
2) SetPrivateState(eStateLaunching)
3) SetPublicState(eStateStopped)
4) SetPrivateState(eStateStopped)
What we expect to see is:
public state: launching -> launching -> stopped
private state: launching -> stopped
What we see is:
public state: launching -> stopped -> launching
private state: launching -> stopped
The second launching change to the public state is issued when WaitForProcessStopPrivate calls HandlePrivateEvent on the event which was created when the private state was set to launching. HandlePrivateEvent has logic to determine whether to broadcase the event and a launching event is *always* broadcast. At the same time, when the stopped event is processed by WaitForProcessStopPrivate next, the function exists and that event is never broadcast, so the public state remains as launching.
HandlePrivateEvent does two things: determine whether there's a next action as well as determine whether to broadcast the event that was processed. There's only ever a next action set if we are trying to attach to a process, but WaitForProcessStopPrivate is only ever called when we are launching a process or connecting remotely, so the first part of HandlePrivateEvent (handling the next action) is irrelevant for WaitForProcessStopPrivate. As far as broadcasting the event is concerned, since we are handling state changes that already occurred to the public state (and are now duplicated in the private state), I believe the broadcast step is unnecessary also (and in fact, it causes the hang).
This change removes the call to HandlePrivateEvent from inside WaitForProcessStopPrivate.
Incidentally, there was also a bug filed recently that is the same issue: https://bugs.llvm.org/show_bug.cgi?id=37496
Reviewers: asmith, labath, zturner, jingham
Reviewed By: zturner, jingham
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47609
llvm-svn: 333781
This teaches lldb-test how to launch a process, set up an IRMemoryMap,
and issue memory allocations in the target process through the map. This
makes it possible to test IRMemoryMap in a targeted way.
This has uncovered two bugs so far. The first bug is that Malloc
performs an adjustment on the pointer returned from AllocateMemory (for
alignment purposes) which ultimately allows overlapping memory regions
to be created. The second bug is that after most of the address space on
the host side is exhausted, Malloc may return the same address multiple
times. These bugs (and hopefully more!) can be uncovered and tested for
with targeted lldb-test commands.
At an even higher level, the motivation for addressing these bugs is
that they can lead to strange user-visible failures (e.g, variables
assume the wrong value during expression evaluation, or the debugger
crashes). See my third comment on this swift-lldb PR for an example:
https://github.com/apple/swift-lldb/pull/652
I hope lldb-test is the right place to add this testing harness. Setting
up a gtest-style unit test proved too cumbersome (you need to recreate
or mock way too much debugger state), as did writing end-to-end tests
(it's hard to write a test that actually hits a buggy path).
With lldb-test, it's easy to read/generate the test input and parse the
test output. I'll attach a simple "fuzz" tester which generates failing
test cases to the Phab review. Here's an example:
```
Command: malloc(size=1024, alignment=32)
Malloc: address = 0xca000
Command: malloc(size=64, alignment=16)
Malloc: address = 0xca400
Command: malloc(size=1024, alignment=16)
Malloc: address = 0xca440
Command: malloc(size=16, alignment=8)
Malloc: address = 0xca840
Command: malloc(size=2048, alignment=16)
Malloc: address = 0xcb000
Command: malloc(size=64, alignment=32)
Malloc: address = 0xca860
Command: malloc(size=1024, alignment=16)
Malloc: address = 0xca890
Malloc error: overlapping allocation detected, previous allocation at [0xca860, 0xca8a0)
```
{F6288839}
Differential Revision: https://reviews.llvm.org/D47508
llvm-svn: 333583
Summary:
Multiple threads could be calling into DoLoadImage concurrently,
only one should be allowed to create the UtilityFunction.
Reviewers: jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D46733
llvm-svn: 332115
Summary:
The comments on this class were out of date with the implementation, and
the implementation itself was inconsistent with our usage of the Timeout
class (I started converting everything to use this class back in D27136,
but I missed this one). I avoid duplicating the waiting logic by
introducing a templated WaitFor function, and make other functions
delegate to that. This function can be also used as a replacement for
the unused WaitForBitToBeSet functions I removed, if it turns out to be
necessary.
As this changes the meaning of a "zero" timeout, I tracked down all the
callers of these functions and updated them accordingly. Propagating the
changes to all the callers of RunShellCommand was a bit too much for
this patch, so I stopped there and will continue that in a follow-up
patch.
I also add some basic unittests for the functions I modified.
Reviewers: jingham, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D46580
llvm-svn: 331880
The function can only return in one of two ways: the Predicate value is
successfully set within the allotted time, or it isn't (the wait times
out). These states can be represented in the return value, and the extra
arg adds no value.
llvm-svn: 331458
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
That way we won't have to compile a new expression every time we want
dlopen a library.
<rdar://problem/32626584>
Differential Revision: https://reviews.llvm.org/D45703
llvm-svn: 330214
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
The OS plugins might have updated the thread list after a core file has
been loaded. The physical thread in the core file may no longer be the
one that should be selected. Hence we should run the thread selection
logic after loading the core.
Differential revision: https://reviews.llvm.org/D44139
llvm-svn: 327501
This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Also add a test. There should also be control for this
in ProcessLaunchInfo and a "target launch" flag, but at least
this will allow you to control it somehow.
<rdar://problem/35842137>
llvm-svn: 319731
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
some methods in the ABI need a Process to do their work.
Instead of passing it in as a one-off argument to those
methods, this patch puts it in the base class and the methods
can retrieve if it needed.
Note that ABI's are sometimes built without a Process
(e.g. SBTarget::GetStackRedZoneSize) so it's entirely
possible that the process weak pointer will not be
able to reconsistitue into a strong pointer.
<rdar://problem/32526754>
llvm-svn: 306633
This is a resubmit of r303732, which was reverted due to a regression.
The original patch caused a regression in TestLoadUnload, which has only showed
up when running the remote test suite. The problem there was that we interrupted
the target just as it has hit the rendezvous breakpoint in the dlopen call. This
meant that the stop reason was set to "breakpoint" even though the event would
not have been broadcast if we had not stopped the process. I fix this by
checking StopInfo->ShouldNotify() before stopping.
I also add a new test for the handling of conditional breakpoints in
expressions, which I noticed to be broken (pr33164)
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303848
Summary:
The function had logic to handle the case when the expression terminated
while we were trying to halt the process, but it failed to take into
account the possibility that the expression stopped because it hit a
breakpoint. This was caused by the fact that the handling of the stopped
events was duplicated for the "halting" and regular cases (the regular
case handled this situation correctly). I've tried to merge these two
cases into one to make sure they stay in sync.
I should call out that the two cases were checking whether the thread
plan has completed in slightly different ways. I am not sure what is the
difference between them, but I think the check should be the same in
both cases, whatever it is, so I just took the one from the regular
case, as that is probably more tested.
For the test, I modified TestUnwindExpression to run the expression with
a smaller timeout (this is how I found this bug originally). With a 1ms
one thread timeout, the test failed consistently without this patch.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303732
It was returning const std::string& which was leading to
unnecessary copies all over the place, and preventing people
from doing things like Dict->GetValueForKeyAsString("foo", ref);
llvm-svn: 302875
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
Chandler Carruth