This addresses an issue introduced in D91559. We would invoke the
compiler with -Lpath/to/lib --sysroot=path/to/sysroot where both
locations contain libraries with the same name, but we expect linker
to pick up the library in path/to/lib since that version is more
specialized. This was the case before D91559 where the sysroot path
would be ignored, but after that change linker would now pick up the
library from the sysroot which resulted in unexpected behavior.
The sysroot path should always come after any user provided library
paths, followed by compiler runtime paths. We want for libraries in user
provided library paths to always take precedence over sysroot libraries.
This matches the behavior of other toolchains used with other targets.
Differential Revision: https://reviews.llvm.org/D102049
CGProfilePass is not always on, it will be disabled when using
non-intergrated assemblers.
// Only enable CGProfilePass when using integrated assembler, since
// non-integrated assemblers don't recognize .cgprofile section.
PMBuilder.CallGraphProfile = !CodeGenOpts.DisableIntegratedAS;
Add -fintegrate-as to make sure the output don't rely on the platform default.
Reviewed By: evgeny777
Differential Revision: https://reviews.llvm.org/D101918
The offload action is used in four different ways as explained
in Driver.cpp:4495. When -c is present, the final phase will be
assemble (linker when -c is not present). However, this phase
is skipped according to D96769 for amdgcn. So, offload action
arrives into following situation,
compile (device) ---> offload ---> offload
without -c the chain looks like,
compile (device) ---> offload ---> linker (device)
---> offload
The former situation creates an unhandled case which causes
problem. The solution presented in this patch delays the D96769
logic until job creation time. This keeps the offload action
in the 1 of the 4 specified situations.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D101901
This attempts to move driver tests out of Frontend and to Driver, separates
RUNs that should fail from RUNs that should succeed, and prevent creating
output files or dumping output.
Differential Revision: https://reviews.llvm.org/D101867
When the target triple was an Apple platform `ToolChain::getOSLibName()`
(called by `getCompilerRTPath()`) would return the full OS name
including the version number (e.g. `darwin20.3.0`). This is not correct
because the library directory for all Apple platforms is `darwin`.
This in turn caused
* `-print-runtime-dir` to return a non-existant path.
* `-print-file-name=<any compiler-rt library>` to return the filename
instead of the full path to the library.
Two regression tests are included.
rdar://77417317
Differential Revision: https://reviews.llvm.org/D101682
GlobalsAA is only created at the beginning of the inliner pipeline. If
an AAManager is cached from previous passes, it won't get rebuilt to
include the newly created GlobalsAA.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D101379
MSVC has added some new flags. Although they're not supported, this adds
parsing support for them so clang-cl doesn't treat them as filenames.
Except for /fsanitize=address which we do support. (clang-cl already
exposes the -fsanitize= option, but this allows using the
MSVC-spelling with a slash.)
Differential revision: https://reviews.llvm.org/D101439
when passing -platform_version to the linker
The use of a valid SDK version is preferred over an empty SDK version
(0.0.0) as the system's runtime might expect the linked binary to contain
a valid SDK version in order for the binary to work correctly
rdar://66795188
This ensures that the Darwin driver uses a consistent target triple
representation when the triple is printed out to the user.
This reverts the revert commit ab0df6c034.
Differential Revision: https://reviews.llvm.org/D100807
Renaming the option is based on discussions in https://reviews.llvm.org/D101122.
It is normally not a good idea to rename driver flags but this flag is
new enough and obscure enough that it is very unlikely to have adopters.
While we're here also drop the `<kind>` metavar. It's not necessary and
is actually inconsistent with the documentation in
`clang/docs/ClangCommandLineReference.rst`.
Differential Revision: https://reviews.llvm.org/D101491
When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
This patch changes the AArch32 crypto instructions (sha2 and aes) to
require the specific sha2 or aes features. These features have
already been implemented and can be controlled through the command
line, but do not have the expected result (i.e. `+noaes` will not
disable aes instructions). The crypto feature retains its existing
meaning of both sha2 and aes.
Several small changes are included due to the knock-on effect this has:
- The AArch32 driver has been modified to ensure sha2/aes is correctly
set based on arch/cpu/fpu selection and feature ordering.
- Crypto extensions are permitted for AArch32 v8-R profile, but not
enabled by default.
- ACLE feature macros have been updated with the fine grained crypto
algorithms. These are also used by AArch64.
- Various tests updated due to the change in feature lists and macros.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D99079
This is a partial revert of b4537c3f51
based on the discussion in https://reviews.llvm.org/D101194. Rather
than using the getMultiarchTriple, we use the getTripleString.
This is useful in runtimes build for example which currently try to
guess the correct triple where to place libraries in the multiarch
layout. Using this flag, the build system can get the correct triple
directly by querying Clang.
Differential Revision: https://reviews.llvm.org/D101400
- Unsupported Windows to drop backslashes code
- Upgrade to current gcc 10 version
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101347
This is a follow-up of e92d2b80c6 ("[Driver] Detect libstdc++ include
paths for native gcc (-m32 and -m64) on Debian i386") for the Debian Hurd
case, which has the same multiarch name reduction from i686 to i386.
i386-linux-gnu is actually Linux-only, so this moves the code of that commit
to Linux.cpp, and adds the same to Hurd.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101331
f263418402 ("[Driver] Gnu.cpp: remove obsoleted i386 triple detection
from end-of-life distribution versions") dropped the i686-gnu gcc path, but
GNU/Hurd's gcc is actually using it, and not i386.
This fixes the gcc path and update the tests to reflect it.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101317
This ensures that the Darwin driver uses a consistent target triple
representation when the triple is printed out to the user.
Differential Revision: https://reviews.llvm.org/D100807
[clang][amdgpu] Use implicit code object version
At present, clang always passes amdhsa-code-object-version on to -cc1. That is
great for certainty over what object version is being used when debugging.
Unfortunately, the command line argument is in AMDGPUBaseInfo.cpp in the amdgpu
target. If clang is used with an llvm compiled with DLLVM_TARGETS_TO_BUILD
that excludes amdgpu, this will be diagnosed (as discovered via D98658):
- Unknown command line argument '--amdhsa-code-object-version=4'
This means that clang, built only for X86, can be used to compile the nvptx
devicertl for openmp but not the amdgpu one. That would shortly spawn fragile
logic in the devicertl cmake to try to guess whether the clang used will work.
This change omits the amdhsa-code-object-version parameter when it matches the
default that AMDGPUBaseInfo.cpp specifies, with a comment to indicate why. As
this is the only part of clang's codegen for amdgpu that depends on the target
in the back end it suffices to build the openmp runtime on most (all?) systems.
It is a non-functional change, though observable in the updated tests and when
compiling with -###. It may cause minor disruption to the amd-stg-open branch.
Revision of D98746, builds on refactor in D101077
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D101095
This avoids test failures where extra files exist in the tree, such
as the standard library built using the runtimes build.
Differential Revision: https://reviews.llvm.org/D101023
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
This reverts commit 05eeed9691 and after
fixing the impacted lldb tests in 5d1c43f333.
[Driver] Support default libc++ library location on Darwin
Darwin driver currently uses libc++ headers that are part of Clang
toolchain when available (by default ../include/c++/v1 relative to
executable), but it completely ignores the libc++ library itself
because it doesn't pass the location of libc++ library that's part
of Clang (by default ../lib relative to the exceutable) to the linker
always using the system copy of libc++.
This may lead to subtle issues when the compilation fails because the
headers that are part of Clang toolchain are incompatible with the
system library. Either the driver should ignore both headers as well as
the library, or it should always try to use both when available.
This patch changes the driver behavior to do the latter which seems more
reasonable, it makes it easy to test and use custom libc++ build on
Darwin while still allowing the use of system version. This also matches
the Clang driver behavior on other systems.
Differential Revision: https://reviews.llvm.org/D45639
If you gave clang the options `--target=arm-pc-windows-msvc` and
`-march=armv8-a+crypto` together, the crypto extension would not be
enabled in the compilation, and you'd see the following warning
message suggesting that the 'armv8-a' had been ignored:
clang: warning: ignoring extension 'crypto' because the 'armv7-a' architecture does not support it [-Winvalid-command-line-argument]
This happens because Triple::getARMCPUForArch(), for the Win32 OS,
unconditionally returns "cortex-a9" (an Armv7 CPU) regardless of
MArch, which overrides the architecture setting on the command line.
I don't think that the combination of Windows and AArch32 _should_
unconditionally outlaw the use of the crypto extension. MSVC itself
doesn't think so: you can perfectly well compile Thumb crypto code
using its AArch32-targeted compiler.
All the other default CPUs in the same switch statement are
conditional on a particular MArch setting; this is the only one that
returns a particular CPU _regardless_ of MArch. So I've fixed this one
by adding a condition, so that if you ask for an architecture *above*
v7, the default of Cortex-A9 no longer overrides it.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D100937
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
This is another attempt to address the issue introduced in
ae8b2cab67.
We cannot capture InstalledDir because FileCheck doesn't handle
the backslashes correctly, so instead we just consume the entire
path prefix which is what other tests are doing.
Darwin driver currently uses libc++ headers that are part of Clang
toolchain when available (by default ../include/c++/v1 relative to
executable), but it completely ignores the libc++ library itself
because it doesn't pass the location of libc++ library that's part
of Clang (by default ../lib relative to the exceutable) to the linker
always using the system copy of libc++.
This may lead to subtle issues when the compilation fails because the
headers that are part of Clang toolchain are incompatible with the
system library. Either the driver should ignore both headers as well as
the library, or it should always try to use both when available.
This patch changes the driver behavior to do the latter which seems more
reasonable, it makes it easy to test and use custom libc++ build on
Darwin while still allowing the use of system version. This also matches
the Clang driver behavior on other systems.
Differential Revision: https://reviews.llvm.org/D45639
This demotes the apple-a12 CPU selection for arm64e to just be the
last-resort default. Concretely, this means:
- an explicitly-specified -mcpu will override the arm64e default;
a user could potentially pick an invalid CPU that doesn't have
v8.3a support, but that's not a major problem anymore
- arm64e-apple-macos (and variants) will pick apple-m1 instead of
being forced to apple-a12.
apple-m1 has the same level of ISA support as apple-a14,
so this is a straightforward mechanical change. However, that
also means this inherits apple-a14's v8.5a+nobti quirkiness.
rdar://68287159
In baremetal::Linker::ConstructJob, LinkerInput is handled prior to T_Group options,
but on the other side in RISCV::Linker::ConstructJob, it is opposite.
We want it to be consistent whether users are using RISCV::Linker or baremetal::Linker.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100615
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
Test Plan: using kernel ASAN and MSAN implementations in FreeBSD
Reviewed By: emaste, dim, arichardson
Differential Revision: https://reviews.llvm.org/D98286
Most text processing commands (eg. grep, awk) have a maximum line length limit on z/OS. The current method of using cc -E & grep fails on z/OS because of this limit. I'm changing the command to create the long line in the response file to use python. This avoids the possibility of any tools blocking the generation of the large response file. This also eliminates the need for the extra file.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D100197
6fe7de90b9 changed GNU toolchain,
and added new RUN line to test expected behavior.
The change is for GNU toolchain only, so this will fail other toolchain,
eg: AIX.
Update the test with `-target` to test GNU tool chain only.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99901
The ROCm installation directory may be another
directory, llvm/ inside the build directory.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D100045
This allows frontend and backend diagnostic files to all go into the
same place. Have it control the Windows (mini-)dump location.
Differential Revision: https://reviews.llvm.org/D99199
Programmers would like to be able to test direct methods by calling them from a
different linkage unit or mocking them, both of which are impossible. This
patch adds a flag that effectively disables the attribute, which will fix this
when enabled in testable builds. rdar://71190891
Differential revision: https://reviews.llvm.org/D95845
Take gcc-8 on Debian i386 as an example. The target-specific libstdc++ search
path (`GPLUSPLUS_TOOL_INCLUDE_DIR`) uses the multiarch name `i386-linux-gnu`,
instead of the triple of the GCC installation `i686-linux-gnu` (the directory
under `usr/lib/gcc/`):
```
/usr/include/c++/8
/usr/include/i386-linux-gnu/c++/8
/usr/include/c++/8/backward
```
Clang currently detects `/usr/lib/gcc/i686-linux-gnu/8/../../../include/i686-linux-gnu/c++/8`.
This patch changes the second i686-linux-gnu to i386-linux-gnu so that
`/usr/include/i386-linux-gnu/c++/8` can be found.
Fix PR49827 - this was somehow regressed by my previous libstdc++ include path
cleanups and fixes for gcc-cross, but it seems that the paths were never properly tested before.
Differential Revision: https://reviews.llvm.org/D99852
For DBX, it does not handle column info well. Set -gno-column-info
by default for DBX.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99703
Currently, support for the x32 ABI is handled as a multilib to the
x86_64 target only. However, full self-hosting x32 systems treating it
as a separate architecture with its own architecture triplets as well as
search paths exist as well, in Debian's x32 port and elsewhere.
This adds the missing architecture triplets and search paths so that
clang can work as a native compiler on x32, and updates the tests so
that they pass when using an x32 libdir suffix.
Additionally, we would previously also assume that objects from any
x86_64-linux-gnu GCC installation could be used to target x32. This
changes the logic so that only GCC installations that include x32
support are used when targetting x32, meaning x86_64-linux-gnux32 GCC
installations, and x86_64-linux-gnu and i686-linux-gnu GCC installations
that include x32 multilib support.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D52050
Based on this debugger type, for now, we plan to:
1: use inline string by default for XCOFF DWARF
2: generate no column info for debug line table.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99400
This helper method is useful even outside of Gnu toolchains, so move
it to ToolChain so it can be reused in other toolchains such as Fuchsia.
Differential Revision: https://reviews.llvm.org/D88452
This follows GCC and simplifies code. /usr/local/include and TOOL_INCLUDE_DIR
should not conflict with the resource directory include so users should not
observe any difference.
This follows GCC. Having libstdc++/libc++ include paths is not useful
anyway because libstdc++/libc++ header files cannot find features.h.
While here, suppress -stdlib++-isystem with -nostdlibinc.
We should have a test verifying / \ for Windows but have such a long
test specifically for Linux cross compilation suffer from Windows \
is too troublesome.
These contain clang driver changes for supporting HWASan on Fuchsia.
This includes hwasan multilibs and the dylib path change.
Differential Revision: https://reviews.llvm.org/D99361
In order to test the preservation of the original Debug Info metadata
in your projects, a front end option could be very useful, since users
usually report that a concrete entity (e.g. variable x, or function fn2())
is missing debug info. The [0] is an example of running the utility
on GDB Project.
This depends on: D82546 and D82545.
Differential Revision: https://reviews.llvm.org/D82547
Summary: Add -fno-split-stack and rename CC1 option from `-split-stacks`
to `-fsplit-stack`.
Test Plan: check-all
Differential Revision: https://reviews.llvm.org/D99245
Not only can this save unneeded filesystem stats, it can make `clang
--sysroot=/path/to/debian-sysroot -c a.cc` work (get `-internal-isystem
$sysroot/usr/include/x86_64-linux-gnu`) even without `lib/x86_64-linux-gnu/`.
This should make thakis happy.
Functions specified in `-emscripten-cxx-exceptions-allowed`, which is
set by Emscripten's `EXCEPTION_CATCHING_ALLOWED` setting, can be inlined
in LLVM middle ends before we reach WebAssemblyLowerEmscriptenEHSjLj
pass in the wasm backend and thus don't get transformed for exception
catching.
This fixes the issue by adding `--force-attribute=FUNC_NAME:noinline`
for each function name in `-emscripten-cxx-exceptions-allowed`, which
adds `noinline` attribute to the specified function and thus excludes
the function from inlining candidates in optimization passes.
Fixes the remaining half of
https://github.com/emscripten-core/emscripten/issues/10721.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D99259
Add an option to tell the compiler that it can use privileged instructions.
This patch only adds the option. Backend implementation will be added in a
future patch.
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D99193
Files compiled with C++ for OpenCL mode can now have a distinct
file extension - clcpp, then clang driver picks the compilation
mode automatically (-x clcpp) without the use of -cl-std=clc++.
Differential Revision: https://reviews.llvm.org/D96771
In order to have the same option on power PC LLVM and power PC gcc
the option will be changed from -mrop-protection to -mrop-protect.
The feature will be off by default and turned on when the option is used.
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D99185
GlobalISel is currently not enabled when using -flto since the front-end
-mvllm flags don't get passed through. This change fixes this for Darwin
platforms. We have to do this in the driver because the code generator choice
isn't embedded into the bitcode file.
Differential Revision: https://reviews.llvm.org/D99126
ROCm has changed installation path to /opt/rocm-{release}. Add detection
for that. Also support ROCM_PATH environment variable.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D98867
Debian multiarch additionally adds /usr/include/<triplet> and somehow
Android borrowed the idea. (Note /usr/<triplet>/include is already an
include dir...). On Debian, we should just assume a GCC installation is
available and use its triple.
With this change, for `#include <ar.h>`, `clang --target=aarch64-linux-gnu`
will read `/usr/lib/gcc/aarch64-linux-gnu/10/../../../../aarch64-linux-gnu/include/ar.h`
(on Debian gcc->gcc-cross)
instead of `/usr/include/ar.h`. Some glibc headers (e.g. gnu/stubs.h) are different across architectures.
After path resolution, it duplicates a subsequent -L entry. The entry below
(lib/gcc/$triple/$version/../../../../$OSLibDir) usually does not exist (e.g.
Arch Linux; Debian cross gcc). When it exists, it typically just has ld.so (e.g.
Debian native gcc) which cannot cause collision. Removing the -L (similar to
reordering it) is therefore justified.
so that when --sysroot is specified, the detected GCC installation will not be
overridden by another from /usr which happens to have a larger version.
This behavior is particularly inconvenient when the system has a larger version
GCC while the user wants to try out an older sysroot.
Delete some tests from linux-ld.c which overlap with cross-linux.c
In GCC, if `-B $prefix` is specified, `$prefix` is used to find executable files and startup files.
`$prefix/include` is added as an include search directory.
Clang overloads -B with GCC installation detection semantics which make the
behavior less predictable (due to the "largest GCC version wins" rule) and
interact poorly with --gcc-toolchain (--gcc-toolchain can be overridden by -B).
* `clang++ foo.cpp` detects GCC installation under `/usr`.
* `clang++ --gcc-toolchain=Inputs foo.cpp` detects GCC installation under `Inputs`.
* `clang++ -BA --gcc-toolchain=B foo.cpp` detects GCC installation under A and B and the larger version wins. With this patch, only B is used for detection.
* `clang++ -BA foo.cpp` detects GCC installation under `A` and `/usr`, and the larger GCC version wins. With this patch `A` is not used for detection.
This patch changes -B to drop the GCC detection semantics. Its executable
searching semantics are preserved. --gcc-toolchain is the recommended option to
specify the GCC installation detection directory.
(
Note: Clang detects GCC installation in various target dependent directories.
`$sysroot/usr` (sysroot defaults to "") is a common directory used by most targets.
Such a directory is expected to contain something like `lib{,32,64}/gcc{,-cross}/$triple`.
Clang will then construct library/include paths from the directory.
)
Differential Revision: https://reviews.llvm.org/D97993
This patch adds a new command line option to clang which outputs the directory containing clangs runtime libraries to stdout.
The primary use case for this command line flag is for build systems using clang-cl. Build systems when using clang-cl invoke the linker, that is either link or lld-link in this case, directly instead of invoking the compiler for the linking process as is common with the other drivers. This leads to issues when runtime libraries of clang, such as sanitizers or profiling, have to be linked in as the compiler cannot communicate the link directory to the linker.
Using this flag, build systems would be capable of getting the directory containing all of clang's runtime libraries and add it to the linker path.
Differential Revision: https://reviews.llvm.org/D98868
At the moment "link.exe" is hard-coded as default linker in MSVC.cpp,
so there's no way to use LLD as default linker for MSVC driver.
This patch adds checking of CLANG_DEFAULT_LINKER to MSVC.cpp and
updates unit-tests that expect link.exe linker to explicitly select it
via -fuse-ld=link, so that buildbots and other builds that set
-DCLANG_DEFAULT_LINKER=foobar don't fail these tests.
This is a squash of
- https://reviews.llvm.org/D98493 (MSVC.cpp change) and
- https://reviews.llvm.org/D98862 (unit-tests change)
Reviewed By: maxim-kuvyrkov
Differential Revision: https://reviews.llvm.org/D98935
Remove emit-llvm-bc from addClangTargetOptions as it conflicts with -E for save-temps.
AMDGCN does not yet support linking object files so backend and assemble actions are
skipped, leaving LLVM IR as the output format.
Reviewed By: JonChesterfield, ronlieb
Differential Revision: https://reviews.llvm.org/D96769
This broke the check-profile tests on Mac, see comment on the code
review.
> This is no longer needed, we can add __llvm_profile_runtime directly
> to llvm.compiler.used or llvm.used to achieve the same effect.
>
> Differential Revision: https://reviews.llvm.org/D98325
This reverts commit c7712087cb.
Also reverting the dependent follow-up commit:
Revert "[InstrProfiling] Generate runtime hook for ELF platforms"
> When using -fprofile-list to selectively apply instrumentation only
> to certain files or functions, we may end up with a binary that doesn't
> have any counters in the case where no files were selected. However,
> because on Linux and Fuchsia, we pass -u__llvm_profile_runtime, the
> runtime would still be pulled in and incur some non-trivial overhead,
> especially in the case when the continuous or runtime counter relocation
> mode is being used. A better way would be to pull in the profile runtime
> only when needed by declaring the __llvm_profile_runtime symbol in the
> translation unit only when needed.
>
> This approach was already used prior to 9a041a7522, but we changed it
> to always generate the __llvm_profile_runtime due to a TAPI limitation.
> Since TAPI is only used on Mach-O platforms, we could use the early
> emission of __llvm_profile_runtime there, and on other platforms we
> could change back to the earlier approach where the symbol is generated
> later only when needed. We can stop passing -u__llvm_profile_runtime to
> the linker on Linux and Fuchsia since the generated undefined symbol in
> each translation unit that needed it serves the same purpose.
>
> Differential Revision: https://reviews.llvm.org/D98061
This reverts commit 87fd09b25f.
When using -fprofile-list to selectively apply instrumentation only
to certain files or functions, we may end up with a binary that doesn't
have any counters in the case where no files were selected. However,
because on Linux and Fuchsia, we pass -u__llvm_profile_runtime, the
runtime would still be pulled in and incur some non-trivial overhead,
especially in the case when the continuous or runtime counter relocation
mode is being used. A better way would be to pull in the profile runtime
only when needed by declaring the __llvm_profile_runtime symbol in the
translation unit only when needed.
This approach was already used prior to 9a041a7522, but we changed it
to always generate the __llvm_profile_runtime due to a TAPI limitation.
Since TAPI is only used on Mach-O platforms, we could use the early
emission of __llvm_profile_runtime there, and on other platforms we
could change back to the earlier approach where the symbol is generated
later only when needed. We can stop passing -u__llvm_profile_runtime to
the linker on Linux and Fuchsia since the generated undefined symbol in
each translation unit that needed it serves the same purpose.
Differential Revision: https://reviews.llvm.org/D98061
Initially, this flag was meant to only be used through cc1 and not directly
through the clang driver. However, we accidentally ended up using this flag
as a driver flag already for selecting multilibs within the fuchsia toolchain.
We're currently in an awkward state where it's only accepted as a driver flag
when targeting Fuchsia, and all other instances it can only be added via
-Xclang. Since we're ready to use this in Fuchsia, we can just expose this to
the driver for simplicity.
Differential Revision: https://reviews.llvm.org/D98375
By default, the driver uses the compiler-rt builtins and links with
-l:libunwind.a.
Restore the previous behavior by passing --rtlib=libgcc.
Reviewed By: danalbert
Differential Revision: https://reviews.llvm.org/D96404
In D97003, CUDA 9.2 is the minimum requirement for OpenMP offloading on
NVPTX target. We don't need to have macros in source code to select right functions
based on CUDA version. we don't need to compile multiple bitcode libraries of
different CUDA versions for each SM. We don't need to worry about future
compatibility with newer CUDA version.
`-target-feature +ptx61` is used in this patch, which corresponds to the highest
PTX version that CUDA 9.2 can support.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97198
Spack is a package management tool extensively used by HPC community.
As ROCm packages are built by Spack by HPC community, we need to teach
clang driver to detect ROCm installation built by Spack.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97340
For MinGW targets, we distinguish between an explicitly shared unwinder
library (requested via -shared-libgcc), an explicitly static one
(requested via -static-libgcc or -static) and the default case (which
just passes -lunwind to the linker, which will pick either shared or
static depending on what's available, with the normal linker logic).
This makes the implicit default case (as added in D79995) actually work as
it was intended, when using the g++ driver (which is the main usecase for
libunwind as far as I know).
Differential Revision: https://reviews.llvm.org/D98023
A bug was introduced when adding -munsafe-fp-atomics.
By default it should be off.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97967
Like nvptx and some other targets, -mconstructor-aliases does not work well with amdgpu,
therefore we disable it in the same approach.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97959
Adding it to the general filepaths results in it being added to the
linker arguments. The AIX linker always looks in this path anyway
and adds it as a default library path component. Adding this duplicate
explicitly results in duplicate entries in path in the loader section
of executables and messes up tools like CMake that parse the default
library flags.
Reviewed By: ZarkoCA
Differential Revision: https://reviews.llvm.org/D97574
Currently the test on line 3 is identical to the test on line 1.
Looking at the rest of the file (particularily the use of FOVERRIDE
as the check-prefix), I think it's pretty clear that this line
was supposed to use `-ftrigraphs` instead of `-trigraphs`.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D97796
Fix regression where we aren't passing `-platform_version` to new ld64.lld after {D95204}.
Most of the changes were originally in D95204, but I backed them out due to
test failures on builds which have `CLANG_DEFAULT_LINKER=lld`. The tests are
properly updated in this diff.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D97741
ccb4124a41 fixed translating -gz=zlib to --compress-debug-sections for
linker invocation for several ToolChains, but omitted FreeBSD.
Differential Revision: https://reviews.llvm.org/D97752
This makes CC1 and driver defaults consistent.
In addition, for more common cases (-g is specified without -gsplit-dwarf), users will not see -fno-split-dwarf-inlining in CC1 options.
Verified that the below is still true:
* `clang -g` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf -fsplit-dwarf-inlining` => no `splitDebugInlining: false`
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D97706
The new Darwin backend for LLD is now able to link reasonably large
real-world programs on x86_64. For instance, we have achieved
self-hosting for the X86_64 target, where all LLD tests pass when
building lld with itself on macOS. As such, we would like to make it the
default back-end.
The new port is now named `ld64.lld`, and the old port remains
accessible as `ld64.lld.darwinold`
This [annoucement email][1] has some context. (But note that, unlike
what the email says, we are no longer doing this as part of the LLVM 12
branch cut -- instead we will go into LLVM 13.)
Numerous mechanical test changes were required to make this change; in
the interest of creating something that's reviewable on Phabricator,
I've split out the boring changes into a separate diff (D95905). I plan to
merge its contents with those in this diff before landing.
(@gkm made the original draft of this diff, and he has agreed to let me
take over.)
[1]: https://lists.llvm.org/pipermail/llvm-dev/2021-January/147665.html
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D95204
On clang emits the compiler version string into debug information
by default for both dwarf and codeview. That makes compiler output
needlessly compiler-version-dependent which makes e.g. comparing
object file outputs during a bisect hard. So it's nice if there's
an easy way to turn this off.
(On ELF, this flag also controls the .comment section, but that
part is ELF-only. The debug-info bit isn't.)
Differential Revision: https://reviews.llvm.org/D97695
Added supporting CC_PRINT_PROC_STAT and CC_PRINT_PROC_STAT_FILE
environment variables to trigger clang driver reporting the process
statistics into specified file (alternate for -fproc-stat-report
option).
Differential Revision: https://reviews.llvm.org/D97094
These flags affect coverage mapping (-fcoverage-mapping), not
-fprofile-[instr-]generate so it makes more sense to use the
-fcoverage-* prefix.
Differential Revision: https://reviews.llvm.org/D97434
We introduce -ffile-compilation-dir shorthand to avoid having to set
-fdebug-compilation-dir and -fprofile-compilation-dir separately. This
is similar to -ffile-prefix-map.
Differential Revision: https://reviews.llvm.org/D97433
The new `-fsanitize-address-destructor-kind=` option allows control over how module
destructors are emitted by ASan.
The new option is consumed by both the driver and the frontend and is propagated into
codegen options by the frontend.
Both the legacy and new pass manager code have been updated to consume the new option
from the codegen options.
It would be nice if the new utility functions (`AsanDtorKindToString` and
`AsanDtorKindFromString`) could live in LLVM instead of Clang so they could be
consumed by other language frontends. Unfortunately that doesn't work because
the clang driver doesn't link against the LLVM instrumentation library.
rdar://71609176
Differential Revision: https://reviews.llvm.org/D96572
This test case was causing a PowerPC buildbot to fail as it happened to
be named lld-multistage,
which matches with the original regex and therefore fails the check-not.
This should better represent the desired check.
Differential Revision: https://reviews.llvm.org/D97423
There are two preconditions to reproduce the issue,
1. Use -save-temps option
2. Provide the -o option with name equal to the input file name
without the file extension. For e.g. clang a.c -o a
With the -o specified, the AssembleJobAction after OffloadWrapperJobAction
will produce the object file with same name as host code object file.
Due to this clash, the OffloadWrapperAction overwrites the initial host
object file, which results in lld error. This also fixes the `multiple definition of __dummy.omp_offloading.entry'` issue in D96769 .
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97273
-O1 and above do dont call real optimizer pipeline in ThinLTO PreLink.
Also clang can't add PostLink OptimizerLastEPCallbacks for in-process ThinLTO.
This results in missing sanitizer passes with ThinLTO.
Simple working solution is just call OptimizerLastEPCallbacks
at the end of buildThinLTOPreLinkDefaultPipeline.
Differential Revision: https://reviews.llvm.org/D96320
When targeting a MSVC triple, --dependant-libs with the name of the clang runtime library for profiling is added to the command line args. In it's current implementations clang_rt.profile-<ARCH> is chosen as the name. When building a distribution using LLVM_ENABLE_PER_TARGET_RUNTIME_DIR this fails, due to the runtime file names not having an architecture suffix in the filename.
This patch refactors getCompilerRT and getCompilerRTBasename to always consider per-target runtime directories. getCompilerRTBasename now simply returns the filename component of the path found by getCompilerRT
Differential Revision: https://reviews.llvm.org/D96638
In current implementation of `deviceRTLs`, we're using some functions
that are CUDA version dependent (if CUDA_VERSION < 9, it is one; otheriwse, it
is another one). As a result, we have to compile one bitcode library for each
CUDA version supported. A worse problem is forward compatibility. If a new CUDA
version is released, we have to update CMake file as well.
CUDA 9.2 has been released for three years. Instead of using various weird tricks
to make `deviceRTLs` work with different CUDA versions and still have forward
compatibility, we can simply drop support for CUDA 9.1 or lower version. It has at
least two benifits:
- We don't need to generate bitcode libraries for each CUDA version;
- Clang driver doesn't need to search for the bitcode lib based on CUDA version.
We can claim that starting from LLVM 12, OpenMP offloading on NVPTX target requires
CUDA 9.2+.
Reviewed By: jdoerfert, JonChesterfield
Differential Revision: https://reviews.llvm.org/D97003
This change enables the builtin function declarations
in clang driver by default using the Tablegen solution
along with the implicit include of 'opencl-c-base.h'
header.
A new flag '-cl-no-stdinc' disabling all default
declarations and header includes is added. If any other
mechanisms were used to include the declarations (e.g.
with -Xclang -finclude-default-header) and the new default
approach is not sufficient the, `-cl-no-stdinc` flag has
to be used with clang to activate the old behavior.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D96515
This patch moves the creation of the '-Wspir-compat' argument from cc1 to the driver.
Without this change, generating command line arguments from `CompilerInvocation` cannot be done reliably: there's no way to distinguish whether '-Wspir-compat' was passed to cc1 on the command line (should be generated), or if it was created within `CompilerInvocation::CreateFromArgs` (should not be generated).
This is also in line with how other '-W' flags are handled.
(This was introduced in D21567.)
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D97041
`sm_35` is the minimum requirement for OpenMP offloading on NVPTX device.
Current driver test case is using `sm_20`. D97003 is going to switch the minimum
CUDA version to 9.2, which only supports `sm_30+`. This patch makes step for the
change.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D97120
This enables AES fusion and the post RA scheduler for the Neoverse cores.
And while we are it also for the A55 that we had missed earlier.
Differential Revision: https://reviews.llvm.org/D96866
Add option -fgpu-sanitize to enable sanitizer for AMDGPU target.
Since it is experimental, it is off by default.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D96835
would otherwise include template specialization types
This helps reduce the size of the encoded C++ type strings in the binary.
This is enabled by default only on Darwin, but can be enabled/disabled
via command line options.
rdar://63288571
Differential Revision: https://reviews.llvm.org/D96816
The following commits added commandline arguments to control following the Arm
Procedure Call Standard for certain volatile bitfield operations:
- https://reviews.llvm.org/D67399
- https://reviews.llvm.org/D72932
This commit fixes the oversight that these args weren't passed from the driver
to cc1 if appropriate.
Where *appropriate* means:
- `-faapcs-bitfield-width`: is the default, so won't be passed
- `-fno-aapcs-bitfield-width`: should be passed
- `-faapcs-bitfield-load`: should be passed
Differential Revision: https://reviews.llvm.org/D96784
Added -mrop-protection for Power PC to turn on codegen that provides some
protection from ROP attacks.
The option is off by default and can be turned on for Power 8, Power 9 and
Power 10.
This patch is for the option only. The feature will be implemented by a later
patch.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D96512
This fixes an issue when "-gdwarf-N" switch was ignored if it was given
before another debug option.
Differential Revision: https://reviews.llvm.org/D96865
This matches the platform default for GCC. It primarily matters when the
integrated assembler is not used as there is no default CPU defined for
ARMv7-A and GNU as is upset with -mcpu=generic.
The new spec does not have `exnref` so EH does not have dependency of
the reference types proposal anymore.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D96903
Drop the `Separate` form of `-fmodule-name X`, `-fprofile-remapping-file X`, and `-frewrite-map-file X`.
To the best of my knowledge they are not used. Their conventional Joined forms (`-fFOO=`) should be used instead.
`-fdebug-compilation-dir X` is used in several places, e.g. chromium/infra/goma.
It is also advertised in http://blog.llvm.org/2019/11/deterministic-builds-with-clang-and-lld.html
So we keep it but make the EQ form canonical and the Separate form an alias.
Differential Revision: https://reviews.llvm.org/D96886
The option was added in D90507 for C/C++ source files. This patch adds
support for assembly files.
Differential Revision: https://reviews.llvm.org/D96783
This patch uses the existing logic of CUDA for searching libomptarget
and extracts it to a common method.
Reviewed By: JonChesterfield, tianshilei1992
Differential Revision: https://reviews.llvm.org/D96248
EarlyCSEPass called after msan redices code size by about 10%.
Similar optimization exists for legacy pass manager in
addGeneralOptsForMemorySanitizer.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D96406
In D91442, @MaskRay commented about a failure. This commit does the following to
address his comments:
1. Replace %T with %t as former is deprecated.
2. Add an explicit --sysroot argument in a test.
Some tests were failing when gcc-10-riscv64-linux-gnu is installed on test machine.
This was happening because the test was checking a case when --gcc-toolchain is not
provided. But if --sysroot was also not provided then code could pick a toolchain
installed in /usr. So to make the test more robust, I have provided an explicit --sysroot
argument. Its value has been chosen to match the existing patterns.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93023
After D93264, using both -fdebug-info-for-profiling and
-fpseudo-probe-for-profiling will cause the compiler to crash.
Diagnose these conflicting options in the driver.
Also, the existing CodeGen test was using the driver when it should be
running cc1.
Differential Revision: https://reviews.llvm.org/D96354
Not all platforms accept -stdlib or -rtlib. Instead of complaining about
the wrong argument to these options, clang complains about the option
itself being present.
Pass an appropriate -target to the clang invocations.
Since ToolChain::GetCXXStdlibType() is a simple getter that might emit
the "invalid library name in argument" warning, it can conceivably be
called several times while initializing the build pipeline.
Before this patch, a simple 'clang++ -stdlib=foo ./test.cpp' would print
the warning twice, -rt=lib=foo would print 6 times.
Change this and always only print the warning once. Keep the rest of the
semantics of the functions.
Differential Revision: https://reviews.llvm.org/D95915
This patch added a distinct CUID for each input file, which is represented by InputAction.
clang initially creates an InputAction for each input file for the host compilation. In CUDA/HIP action
builder, each InputAction is given a CUID and cloned for each GPU arch, and the CUID is also cloned. In this way,
we guarantee the corresponding device and host compilation for the same file shared the
same CUID. On the other hand, different compilation units have different CUID.
-fuse-cuid=random|hash|none is added to control the method to generate CUID. The default
is hash. -cuid=X is also added to specify CUID explicitly, which overrides -fuse-cuid.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D95007
Currently -fgpu-rdc is not passed to host clang -cc1.
This causes issue because -fgpu-rdc affects shadow
variable linkage in host compilation.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D96105
Link: https://lists.llvm.org/pipermail/llvm-dev/2020-October/146162.html "[RFC] FileCheck: (dis)allowing unused prefixes"
If a downstream project using lit needs time for transition,
add the following to `lit.local.cfg`:
```
from lit.llvm.subst import ToolSubst
fc = ToolSubst('FileCheck', unresolved='fatal')
config.substitutions.insert(0, (fc.regex, 'FileCheck --allow-unused-prefixes'))
```
Differential Revision: https://reviews.llvm.org/D95849
Commit 6bf29dbb enables float128 feature by default for Power9 targets.
But float128 may cause build failure in libcxx testing. Revert this
commit first to unblock LLVM 12 release.
This fixes Bugzilla #48894 for Arm, where it
was reported that -Wa,-march was not being handled
by the integrated assembler.
This was previously fixed for -Wa,-mthumb by
parsing the argument in ToolChain::ComputeLLVMTriple
instead of CollectArgsForIntegratedAssembler.
It has to be done in the former because the Triple
is read only by the time we get to the latter.
Previously only mcpu would work via -Wa but only because
"-target-cpu" is it's own option to cc1, which we were
able to modify. Target architecture is part of "-target-triple".
This change applies the same workaround to -march and cleans up
handling of -Wa,-mcpu at the same time. There were some
places where we were not using the last instance of an argument.
The existing -Wa,-mthumb code was doing this correctly,
so I've just added tests to confirm that.
Now the same rules will apply to -Wa,-march/-mcpu as would
if you just passed them to the compiler:
* -Wa/-Xassembler options only apply to assembly files.
* Architecture derived from mcpu beats any march options.
* When there are multiple mcpu or multiple march, the last
one wins.
* If there is a compiler option and an assembler option of
the same type, we prefer the one that fits the input type.
* If there is an applicable mcpu option but it is overruled
by an march, the cpu value is still used for the "-target-cpu"
cc1 option.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D95872
Petr Hosek