Currently we don't lock ScopedErrorReportLock around fork
and it mostly works becuase tsan has own report_mtx that
is locked around fork and tsan reports.
However, sanitizer_common code prints some own reports
which are not protected by tsan's report_mtx. So it's better
to lock ScopedErrorReportLock explicitly.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D106048
The new GET_CURRENT_PC() can lead to spurious top inlined internal frames.
Here are 2 examples from bots, in both cases the malloc is supposed to be
the top frame (#0):
WARNING: ThreadSanitizer: signal-unsafe call inside of a signal
#0 __sanitizer::StackTrace::GetNextInstructionPc(unsigned long)
#1 malloc
Location is heap block of size 99 at 0xbe3800003800 allocated by thread T1:
#0 __sanitizer::StackTrace::GetNextInstructionPc(unsigned long)
#1 malloc
Let's strip these internal top frames from reports.
With other code changes I also observed some top frames
from __tsan::ScopedInterceptor, proactively remove these as well.
Differential Revision: https://reviews.llvm.org/D106081
We obtain the current PC is all interceptors and collectively
common interceptor code contributes to overall slowdown
(in particular cheaper str/mem* functions).
The current way to obtain the current PC involves:
4493e1: e8 3a f3 fe ff callq 438720 <_ZN11__sanitizer10StackTrace12GetCurrentPcEv>
4493e9: 48 89 c6 mov %rax,%rsi
and the called function is:
uptr StackTrace::GetCurrentPc() {
438720: 48 8b 04 24 mov (%rsp),%rax
438724: c3 retq
The new way uses address of a local label and involves just:
44a888: 48 8d 35 fa ff ff ff lea -0x6(%rip),%rsi
I am not switching all uses of StackTrace::GetCurrentPc to GET_CURRENT_PC
because it may lead some differences in produced reports and break tests.
The difference comes from the fact that currently we have PC pointing
to the CALL instruction, but the new way does not yield any code on its own
so the PC points to a random instruction in the function and symbolizing
that instruction can produce additional inlined frames (if the random
instruction happen to relate to some inlined function).
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D106046
Define the address ranges (similar to the C/C++ ones, but with the heap
range merged into the app range) and enable the sanity check.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
Reuse the assembly glue code from sanitizer_common_interceptors.inc and
the handling logic from the __tls_get_addr interceptor.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
The kernel supports a full 64-bit VMA, but we can use only 48 bits due
to the limitation imposed by SyncVar::GetId(). So define the address
ranges similar to the other architectures, except that the address
space "tail" needs to be made inaccessible in CheckAndProtect(). Since
it's for only one architecture, don't make an abstraction for this.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
s390x requires ThreadRegistry.mtx_.opaque_storage_ to be 4-byte
aligned. Since other architectures may have similar requirements, use
the maximum thread_registry_placeholder alignment from other
sanitizers, which is 64 (LSan).
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
When running with an old glibc, CollectStaticTlsBlocks() calls
__tls_get_addr() in order to force TLS allocation. This function is not
available on s390 and the code simply does nothing in this case,
so all the resulting static TLS blocks end up being incorrect.
Fix by calling __tls_get_offset() on s390.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
setuid(0) hangs on SystemZ under TSan because TSan's BackgroundThread
ignores SIGSETXID. This in turn happens because internal_sigdelset()
messes up the mask bits on big-endian system due to how
__sanitizer_kernel_sigset_t is defined.
Commit d9a1a53b8d ("[ESan] [MIPS] Fix workingset-signal-posix.cpp on
MIPS") fixed this for MIPS by adjusting the __sanitizer_kernel_sigset_t
definition. Generalize this by defining __SANITIZER_KERNEL_NSIG based
on kernel's _NSIG and using uptr[] for __sanitizer_kernel_sigset_t.sig
on all platforms.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
Currently ThreadRegistry is overcomplicated because of tsan,
it needs tid quarantine and reuse counters. Other sanitizers
don't need that. It also seems that no other sanitizer now
needs max number of threads. Asan used to need 2^24 limit,
but it does not seem to be needed now. Other sanitizers blindly
copy-pasted that without reasons. Lsan also uses quarantine,
but I don't see why that may be potentially needed.
Add a ThreadRegistry ctor that does not require any sizes
and use it in all sanitizers except for tsan.
In preparation for new tsan runtime, which won't need
any of these parameters as well.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D105713
Currently we allocate MemoryMapper per size class.
MemoryMapper mmap's and munmap's internal buffer.
This results in 50 mmap/munmap calls under the global
allocator mutex. Reuse MemoryMapper and the buffer
for all size classes. This radically reduces number of
mmap/munmap calls. Smaller size classes tend to have
more objects allocated, so it's highly likely that
the buffer allocated for the first size class will
be enough for all subsequent size classes.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105778
A previous change brought the new, relaxed implementation of "on failure
memory ordering" for synchronization primitives in LLVM over to TSan
land [1]. It included the following assert:
```
// 31.7.2.18: "The failure argument shall not be memory_order_release
// nor memory_order_acq_rel". LLVM (2021-05) fallbacks to Monotonic
// (mo_relaxed) when those are used.
CHECK(IsLoadOrder(fmo));
static bool IsLoadOrder(morder mo) {
return mo == mo_relaxed || mo == mo_consume
|| mo == mo_acquire || mo == mo_seq_cst;
}
```
A previous workaround for a false positive when using an old Darwin
synchronization API assumed this failure mode to be unused and passed a
dummy value [2]. We update this value to `mo_relaxed` which is also the
value used by the actual implementation to avoid triggering the assert.
[1] https://reviews.llvm.org/D99434
[2] https://reviews.llvm.org/D21733
rdar://78122243
Differential Revision: https://reviews.llvm.org/D105844
This is a second attempt at D101497, which landed as
9a9bc76c0e but had to be reverted in
8cf7ddbdd4.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37e the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
The Solaris/amd64 buildbot
<https://lab.llvm.org/staging/#/builders/101/builds/2845> has recently been
broken several times, at least one of those remains unfixed:
[63/446] Generating Sanitizer-x86_64-Test
[...]
Undefined first referenced
symbol in file
_ZN11__sanitizer15internal_usleepEy /opt/llvm-buildbot/home/solaris11-amd64/clang-solaris11-amd64/stage1/projects/compiler-rt/lib/sanitizer_common/tests/libRTSanitizerCommon.test.x86_64.a(sanitizer_common.cpp.o)
ld: fatal: symbol referencing errors
Thist patch fixes it by defining the missing `internal_usleep`.
Tested on `amd64-pc-solaris2.11.`
Differential Revision: https://reviews.llvm.org/D105878
Currently we allocate MemoryMapper per size class.
MemoryMapper mmap's and munmap's internal buffer.
This results in 50 mmap/munmap calls under the global
allocator mutex. Reuse MemoryMapper and the buffer
for all size classes. This radically reduces number of
mmap/munmap calls. Smaller size classes tend to have
more objects allocated, so it's highly likely that
the buffer allocated for the first size class will
be enough for all subsequent size classes.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105778
This moves logic for setting kAliasRegionStart into hwasan_allocator.cpp
so other platforms that do not support aliasing mode will not need to define
kAliasRegionStart.
Differential Revision: https://reviews.llvm.org/D105725
This reverts commit 0726695214.
This causes the following build failure with gcc 10.3.0:
/home/nikic/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_allocator_primary64.h:114:31: error: declaration of ‘typedef class __sanitizer::MemoryMapper<__sanitizer::SizeClassAllocator64<Params> > __sanitizer::SizeClassAllocator64<Params>::MemoryMapper’ changes meaning of ‘MemoryMapper’ [-fpermissive]
114 | typedef MemoryMapper<ThisT> MemoryMapper;
Currently we allocate MemoryMapper per size class.
MemoryMapper mmap's and munmap's internal buffer.
This results in 50 mmap/munmap calls under the global
allocator mutex. Reuse MemoryMapper and the buffer
for all size classes. This radically reduces number of
mmap/munmap calls. Smaller size classes tend to have
more objects allocated, so it's highly likely that
the buffer allocated for the first size class will
be enough for all subsequent size classes.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105778
Another follow-up to 0da172b176
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:103:1: error: mutex 'CandidateTSD->Mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
}
^
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:95:21: note: mutex acquired here
CandidateTSD->lock();
^
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:103:1: error: mutex 'TSD->Mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
}
^
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:101:8: note: mutex acquired here
TSD->lock();
^
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:103:1: error: mutex 'TSDs[Index].Mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
}
^
compiler-rt/lib/scudo/scudo_tsd_shared.cpp:80:23: note: mutex acquired here
if (TSDs[Index].tryLock()) {
^
Looks like an oversight in 0da172b176
compiler-rt/lib/scudo/scudo_tsd_shared.inc:53:1: error: mutex 'TSD->Mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
}
^
compiler-rt/lib/scudo/scudo_tsd_shared.inc:49:12: note: mutex acquired here
if (TSD->tryLock())
^
__m128i is vector SSE type used in tsan.
It's handy to be able to print it for debugging.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102167
The memcpy interceptor is the only one that uses COMMON_INTERCEPTOR_ENTER
more than once in a single function. This does not allow COMMON_INTERCEPTOR_ENTER
to use labels, because they are global for the whole function (not block scoped).
Don't include COMMON_INTERCEPTOR_ENTER code twice.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105774
sem_trywait never blocks.
Use REAL instead of COMMON_INTERCEPTOR_BLOCK_REAL.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105775
The internal allocator adds 8-byte header for debugging purposes.
The problem with it is that it's not possible to allocate nicely-sized
objects without a significant overhead. For example, if we allocate
512-byte objects, that will be rounded up to 768 or something.
This logic migrated from tsan where it was added during initial development,
I don't remember that it ever caught anything (we don't do bugs!).
Remove it so that it's possible to allocate nicely-sized objects
without overheads.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105777
We use 0 for empty stack id from stack depot.
Deadlock detector 1 is the only place that uses -1
as a special case. Use 0 because there is a number
of checks of the form "if (stack id) ...".
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105776
Enable clang Thread Safety Analysis for sanitizers:
https://clang.llvm.org/docs/ThreadSafetyAnalysis.html
Thread Safety Analysis can detect inconsistent locking,
deadlocks and data races. Without GUARDED_BY annotations
it has limited value. But this does all the heavy lifting
to enable analysis and allows to add GUARDED_BY incrementally.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105716
We have 3 different mutexes (RWMutex, BlockingMutex __tsan::Mutex),
each with own set of downsides. I want to unify them under a name Mutex.
But it will conflict with Mutex in the deadlock detector,
which is a way too generic name. Rename it to MutexState.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D105773
Currently ThreadRegistry is overcomplicated because of tsan,
it needs tid quarantine and reuse counters. Other sanitizers
don't need that. It also seems that no other sanitizer now
needs max number of threads. Asan used to need 2^24 limit,
but it does not seem to be needed now. Other sanitizers blindly
copy-pasted that without reasons. Lsan also uses quarantine,
but I don't see why that may be potentially needed.
Add a ThreadRegistry ctor that does not require any sizes
and use it in all sanitizers except for tsan.
In preparation for new tsan runtime, which won't need
any of these parameters as well.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D105713
We have SleepForSeconds, SleepForMillis and internal_sleep.
Some are implemented in terms of libc functions, some -- in terms
of syscalls. Some are implemented in per OS files,
some -- in libc/nolibc files. That's unnecessary complex
and libc functions cause crashes in some contexts because
we intercept them. There is no single reason to have calls to libc
when we have syscalls (and we have them anyway).
Add internal_usleep that is implemented in terms of syscalls per OS.
Make SleepForSeconds/SleepForMillis/internal_sleep a wrapper
around internal_usleep that is implemented in sanitizer_common.cpp once.
Also remove return values for internal_sleep, it's not used anywhere.
Eventually it would be nice to remove SleepForSeconds/SleepForMillis/internal_sleep.
There is no point in having that many different names for the same thing.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D105718
LibIgnore is checked in every interceptor.
Currently it has all logic in the single function
in the header, which makes it uninlinable.
Split it into fast path (no libraries ignored)
and slow path (have ignored libraries).
It makes the fast path inlinable (single load).
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D105719
This reverts commit 9a9bc76c0e.
That commit broke "ninja install" when building compiler-rt for mingw
targets, building standalone (pointing cmake at the compiler-rt
directory) with cmake 3.16.3 (the one shipped in ubuntu 20.04), with
errors like this:
-- Install configuration: "Release"
CMake Error at cmake_install.cmake:44 (file):
file cannot create directory: /include/sanitizer. Maybe need
administrative privileges.
Call Stack (most recent call first):
/home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake:37 (include)
FAILED: include/CMakeFiles/install-compiler-rt-headers
cd /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/include && /usr/bin/cmake -DCMAKE_INSTALL_COMPONENT="compiler-rt-headers" -P /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake
ninja: build stopped: subcommand failed.
This makes sure we have support for MTE instructions.
Later the check can be extended to support MTE on other compilers.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D105722
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D101497
Based on comments in D91466, we can make the current implementation
linux-speciic. The fuchsia implementation will just be a call to
`__sanitizer_fill_shadow`.
Differential Revision: https://reviews.llvm.org/D105663
The new name is something less linux-y and more platform generic. Once we
finalize the tagged pointer ABI in zircon, we will do the appropriate check
for fuchsia to see that TBI is enabled.
Differential Revision: https://reviews.llvm.org/D105667
trapOnAddress is designed to SEGV on a specific address. Unfortunately,
with an IR change, __builtin_unreachable() ends up doing DCE on things
that have side effects, like the load that causes the trap.
Change to __builtin_trap() to avoid the optimisation.
Root cause is still an LLVM bug, and tracked in
https://bugs.llvm.org/show_bug.cgi?id=47480.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105654
This contains all the definitions required by hwasan for the fuchsia
implementation and can be landed independently from the remaining parts of D91466.
Differential Revision: https://reviews.llvm.org/D103936
This disables use of hwasan interceptors which we do not use on Fuchsia. This
explicitly sets the macro for defining the hwasan versions of new/delete.
Differential Revision: https://reviews.llvm.org/D103544
This patch splits up hwasan thread creation between `__sanitizer_before_thread_create_hook`,
`__sanitizer_thread_create_hook`, and `__sanitizer_thread_start_hook`.
The linux implementation creates the hwasan thread object inside the
new thread. On Fuchsia, we know the stack bounds before thread creation,
so we can initialize part of the thread object in `__sanitizer_before_thread_create_hook`,
then initialize the stack ring buffer in `__sanitizer_thread_start_hook`
once we enter the thread.
Differential Revision: https://reviews.llvm.org/D104085
We would find an address with matching tag, only to discover in
ShowCandidate that it's very far away from [stack].
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105197
If the fault address is at the boundary of memory regions, this could
cause us to segfault otherwise.
Ran test with old compiler_rt to make sure it fails.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105032
Compiling compiler-rt with Clang modules and libc++ revealed that the
global `operator new` is being called without including `<new>`.
Differential Revision: https://reviews.llvm.org/D105401
This change introduces libMutagen/libclang_rt.mutagen.a as a subset of libFuzzer/libclang_rt.fuzzer.a. This library contains only the fuzzing strategies used by libFuzzer to produce new test inputs from provided inputs, dictionaries, and SanitizerCoverage feedback.
Most of this change is simply moving sections of code to one side or the other of the library boundary. The only meaningful new code is:
* The Mutagen.h interface and its implementation in Mutagen.cpp.
* The following methods in MutagenDispatcher.cpp:
* UseCmp
* UseMemmem
* SetCustomMutator
* SetCustomCrossOver
* LateInitialize (similar to the MutationDispatcher's original constructor)
* Mutate_AddWordFromTORC (uses callbacks instead of accessing TPC directly)
* StartMutationSequence
* MutationSequence
* DictionaryEntrySequence
* RecommendDictionary
* RecommendDictionaryEntry
* FuzzerMutate.cpp (which now justs sets callbacks and handles printing)
* MutagenUnittest.cpp (which adds tests of Mutagen.h)
A note on performance: This change was tested with a 100 passes of test/fuzzer/LargeTest.cpp with 1000 runs per pass, both with and without the change. The running time distribution was qualitatively similar both with and without the change, and the average difference was within 30 microseconds (2.240 ms/run vs 2.212 ms/run, respectively). Both times were much higher than observed with the fully optimized system clang (~0.38 ms/run), most likely due to the combination of CMake "dev mode" settings (e.g. CMAKE_BUILD_TYPE="Debug", LLVM_ENABLE_LTO=OFF, etc.). The difference between the two versions built similarly seems to be "in the noise" and suggests no meaningful performance degradation.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D102447
We need the compiler generated variable to override the weak symbol of
the same name inside the profile runtime, but using LinkOnceODRLinkage
results in weak symbol being emitted which leads to an issue where the
linker might choose either of the weak symbols potentially disabling the
runtime counter relocation.
This change replaces the use of weak definition inside the runtime with
an external weak reference to address the issue. We also place the
compiler generated symbol inside a COMDAT group so dead definition can
be garbage collected by the linker.
Differential Revision: https://reviews.llvm.org/D105176
If we get here from reallocate, BlockEnd is tagged. Then we
will storeTag(UntaggedEnd) into the header of the next chunk.
Luckily header tag is 0 so unpatched code still works.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D105261
It's already covered by multiple tests, but to trigger
this path we need MTE+GWP which disabled.
Reviewed By: hctim, pcc
Differential Revision: https://reviews.llvm.org/D105232
This allows application code checks if origin tracking is on before
printing out traces.
-dfsan-track-origins can be 0,1,2.
The current code only distinguishes 1 and 2 in compile time, but not at runtime.
Made runtime distinguish 1 and 2 too.
Reviewed By: browneee
Differential Revision: https://reviews.llvm.org/D105128
Users can call HwasanThreadList::GetRingBufferSize rather than RingBufferSize
to prevent having to do the calculation in RingBufferSize. This will be useful
for Fuchsia where we plan to initialize the stack ring buffer separately from
the rest of thread initialization.
Differential Revision: https://reviews.llvm.org/D104823
A heap or global buffer that is far away from the faulting address is
unlikely to be the cause, especially if there is a potential
use-after-free as well, so we want to show it after the other
causes.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D104781
Mmap interceptor is not atomic in the sense that it
exposes unmapped shadow for a brief period of time.
This breaks programs that mmap over another mmap
and access the region concurrently.
Don't unmap shadow in the mmap interceptor to fix this.
Just mapping new shadow on top should be enough to zero it.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D104593
Similar to InitOptions in asan, we can use this optional struct for
initializing some members thread objects before they are created. On
linux, this is unused and can remain undefined. On fuchsia, this will
just be the stack bounds.
Differential Revision: https://reviews.llvm.org/D104553
Bionic <malloc.h> may provide the definitions of M_MEMTAG_TUNING_* constants.
Do not redefine them in that case.
Differential Revision: https://reviews.llvm.org/D104758
These have been broken by https://reviews.llvm.org/D104494.
However, `lib/fuzzer/dataflow/` is unused (?) so addressing this is not a priority.
Added TODOs to re-enable them in the future.
Reviewed By: stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104568
Once D104553 lands, CreateCurrentThread will be able to accept optional
parameters for initializing the hwasan thread object. On fuchsia, we can get
stack info in the platform-specific InitThreads and pass it through
CreateCurrentThread. On linux, this is a no-op.
Differential Revision: https://reviews.llvm.org/D104561
These other platforms are unsupported and untested.
They could be re-added later based on MSan code.
Reviewed By: gbalats, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104481
Explain what the given stack trace means before showing it, rather than
only in the paragraph at the end.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D104523
This allows for other implementations to define their own version of `Thread::Init`.
This will be the case for Fuchsia where much of the thread initialization can be
broken up between different thread hooks (`__sanitizer_before_thread_create_hook`,
`__sanitizer_thread_create_hook`, `__sanitizer_thread_start_hook`). Namely, setting
up the heap ring buffer and stack info and can be setup before thread creation.
The stack ring buffer can also be setup before thread creation, but storing it into
`__hwasan_tls` can only be done on the thread start hook since it's only then we
can access `__hwasan_tls` for that thread correctly.
Differential Revision: https://reviews.llvm.org/D104248
The default callback instrumentation in x86 LAM mode uses ASLR bits
to randomly choose a tag, and thus has a 1/64 chance of choosing a
stack tag of 0, causing stack tests to fail intermittently. By using
__hwasan_generate_tag to pick tags, we guarantee non-zero tags and
eliminate the test flakiness.
aarch64 doesn't seem to have this problem using thread-local addresses
to pick tags, so perhaps we can remove this workaround once we implement
a similar mechanism for LAM.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D104470
These other platforms are unsupported and untested.
They could be re-added later based on MSan code.
Reviewed By: gbalats, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104481
This is to fix build on Android. And we don't want to intercept more new/delete operators on Android.
Differential Revision: https://reviews.llvm.org/D104313
Before: ADDR is located -320 bytes to the right of 1072-byte region
After: ADDR is located 752 bytes inside 1072-byte region
Reviewed By: eugenis, walli99
Differential Revision: https://reviews.llvm.org/D104412
Short granule tags as poison cause a UaF to read the referenced
memory to retrieve the tag, and means we do not detect the UaF
if the last granule's tag is still around.
This only increases the change of not catching a UaF from
0.39 % (1 / 256) to 0.42 % (1 / (256 - 17)).
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D104304
The dsb after instruction cache invalidation only needs to be executed
if any instruction cache invalidation did happen.
Without this change, if the CTR_EL0.DIC bit indicates that instruction
cache invalidation is not needed, __clear_cache would execute two dsb
instructions in a row; with the second one being unnecessary.
Differential Revision: https://reviews.llvm.org/D104371
The `MockAllocator` used in `ScudoTSDTest` wasn't allocated
properly aligned, which resulted in the `TSDs` of the shared
registry not being aligned either. This lead to some failures
like: https://reviews.llvm.org/D103119#2822008
This changes how the `MockAllocator` is allocated, same as
Vitaly did in the combined tests, properly aligning it, which
results in the `TSDs` being aligned as well.
Add a `DCHECK` in the shared registry to check that it is.
Differential Revision: https://reviews.llvm.org/D104402
Similar to SHADOW_OFFSET on asan, we can use this for hwasan so platforms that
use a constant value for the start of shadow memory can just use the constant
rather than access a global.
Differential Revision: https://reviews.llvm.org/D104275
Apparently __builtin_abort() is not supported when targetting Windows.
This should fix the following builder errors:
clang_rt.builtins-x86_64.lib(int_util.c.obj) : error LNK2019: unresolved
external symbol __builtin_abort referenced in function __compilerrt_abort_impl
When compiled with -ffreestanding, we should not assume that headers
declaring functions such as abort() are available. While the compiler may
still emit calls to those functions [1], we should not require the headers
to build compiler-rt since that can result in a cyclic dependency graph:
The compiler-rt functions might be required to build libc.so, but the libc
headers such as stdlib.h might only be available once libc has been built.
[1] From https://gcc.gnu.org/onlinedocs/gcc/Standards.html:
GCC requires the freestanding environment provide memcpy, memmove,
memset and memcmp. Finally, if __builtin_trap is used, and the target
does not implement the trap pattern, then GCC emits a call to abort.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D103876
cstddef is needed for size_t definition.
(Multiple headers can provide size_t but none of them exists.)
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D96213
This will simplify integration of this code into LLVM -- The
Simple-Packed-Serialization code can be copied near-verbatim, but
WrapperFunctionResult will require more adaptation.
cmake-3.16+ for AIX changes the default behavior of building a `SHARED` library which breaks AIX's build of libatomic, i.e., cmake-3.16+ builds `SHARED` as an archive of dynamic libraries. To fix it, we have to build `libatomic.so.1` as `MODULE` which keeps `libatomic.so.1` as an normal dynamic library.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103786
This mostly follows LLVM's InstrProfReader.cpp error handling.
Previously, attempting to merge corrupted profile data would result in
crashes. See https://crbug.com/1216811#c4.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D104050
This fixes an issue introduced by https://reviews.llvm.org/D70662
Function-scope static initialization are guarded in C++, so we should probably
not use it because it introduces a dependency on __cxa_guard* symbols.
In the context of clang, libasan is linked statically, and it currently needs to
the odd situation where compiling C code with clang and asan requires -lstdc++
Differential Revision: https://reviews.llvm.org/D102475
trusty.cpp and trusty.h define Trusty implementations of map and other
platform-specific functions. In addition to adding Trusty configurations
in allocator_config.h and size_class_map.h, MapSizeIncrement and
PrimaryEnableRandomOffset are added as configurable options in
allocator_config.h.
Background on Trusty: https://source.android.com/security/trusty
Differential Revision: https://reviews.llvm.org/D103578
This removes the `__sanitizer_*` allocation function definitions from
`hwasan_interceptors.cpp` and moves them into their own file. This way
implementations that do not use interceptors at all can just ignore
(almost) everything in `hwasan_interceptors.cpp`.
Also remove some unused headers in `hwasan_interceptors.cpp` after the move.
Differential Revision: https://reviews.llvm.org/D103564
Complete support for fast8:
- amend shadow size and mapping in runtime
- remove fast16 mode and -dfsan-fast-16-labels flag
- remove legacy mode and make fast8 mode the default
- remove dfsan-fast-8-labels flag
- remove functions in dfsan interface only applicable to legacy
- remove legacy-related instrumentation code and tests
- update documentation.
Reviewed By: stephan.yichao.zhao, browneee
Differential Revision: https://reviews.llvm.org/D103745
dfsan does not use sanitizer allocator as others. In practice,
we let it use glibc's allocator since tcmalloc needs more work
to be working with dfsan well. With glibc, we observe large
memory leakage. This could relate to two things:
1) glibc allocator has limitation: for example, tcmalloc can reduce memory footprint 2x easily
2) glibc may call unmmap directly as an internal system call by using system call number. so DFSan has no way to release shadow spaces for those unmmap.
Using sanitizer allocator addresses the above issues
1) its memory management is close to tcmalloc
2) we can register callback when sanitizer allocator calls unmmap, so dfsan can release shadow spaces correctly.
Our experiment with internal server-based application proved that with the change, in a-few-day run, memory usage leakage is close to what tcmalloc does w/o dfsan.
This change mainly follows MSan's code.
1) define allocator callbacks at dfsan_allocator.h|cpp
2) mark allocator APIs to be discard
3) intercept allocator APIs
4) make dfsan_set_label consistent with MSan's SetShadow when setting 0 labels, define dfsan_release_meta_memory when unmap is called
5) add flags about whether zeroing memory after malloc/free. dfsan works at byte-level, so bit-level oparations can cause reading undefined shadow. See D96842. zeroing memory after malloc helps this. About zeroing after free, reading after free is definitely UB, but if user code does so, it is hard to debug an overtainting caused by this w/o running MSan. So we add the flag to help debugging.
This change will be split to small changes for review. Before that, a question is
"this code shares a lot of with MSan, for example, dfsan_allocator.* and dfsan_new_delete.*.
Does it make sense to unify the code at sanitizer_common? will that introduce some
maintenance issue?"
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D101204
This resolves an issue tripping a `DCHECK`, as I was checking for the
capacity and not the size. We don't need to 0-init the Vector as it's
done already, and make sure we only 0-out the string on clear if it's
not empty.
Differential Revision: https://reviews.llvm.org/D103716
prepareTaggedChunk uses Tag 0 for header.
Android already PR_MTE_TAG_MASK to 0xfffe,
but with the patch we will not need to deppend
on the system configuration.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D103134
Some platforms (eg: Trusty) are extremelly memory constrained, which
doesn't necessarily work well with some of Scudo's current assumptions.
`Vector` by default (and as such `String` and `ScopedString`) maps a
page, which is a bit of a waste. This CL changes `Vector` to use a
buffer local to the class first, then potentially map more memory if
needed (`ScopedString` currently are all stack based so it would be
stack data). We also want to allow a platform to prevent any dynamic
resizing, so I added a `CanGrow` templated parameter that for now is
always `true` but would be set to `false` on Trusty.
Differential Revision: https://reviews.llvm.org/D103641
This moves the implementations for HandleTagMismatch, __hwasan_tag_mismatch4,
and HwasanAtExit from hwasan_linux.cpp to hwasan.cpp and declares them in hwasan.h.
This way, calls to those functions can be shared with the fuchsia implementation
without duplicating code.
Differential Revision: https://reviews.llvm.org/D103562
WrapperFunctionResult is a C++ wrapper for __orc_rt_CWrapperFunctionResult
that automatically manages the underlying struct.
The Simple Packed Serialization (SPS) utilities support a simple serialization
scheme for wrapper function argument and result buffers:
Primitive typess (bool, char, int8_t, and uint8_t, int16_t, uint16_t, int32_t,
uint32_t, int64_t, uint64_t) are serialized in little-endian form.
SPSTuples are serialized by serializing each of the tuple members in order
without padding.
SPSSequences are serialized by serializing a sequence length (as a uint64_t)
followed by each of the elements of the sequence in order without padding.
Serialization/deserialization always involves a pair of SPS type tag (a tag
representing the serialized format to use, e.g. uint32_t, or
SPSTuple<bool, SPSString>) and a concrete type to be serialized from or
deserialized to (uint32_t, std::pair<bool, std::string>). Serialization for new
types can be implemented by specializing the SPSSerializationTraits type.
When toolchain can supports all of arm, armhf and armv6m architectures compiler-rt
libraries won't compile because architecture specific flags are appended to single
BUILTIN_CFLAGS variable.
Differential revision: https://reviews.llvm.org/D103363
OrcRTCWrapperFunctionResult is a C struct that can be used to return serialized
results from "wrapper functions" -- functions that deserialize an argument
buffer, call through to an actual implementation function, then serialize and
return the result of that function. Wrapper functions allow calls between ORC
and the ORC Runtime to be written using a single signature,
WrapperFunctionResult(const char *ArgData, size_t ArgSize), and without coupling
either side to a particular transport mechanism (in-memory, TCP, IPC, ... the
actual mechanism will be determined by the TargetProcessControl implementation).
OrcRTCWrapperFunctionResult is designed to allow small serialized buffers to
be returned by value, with larger serialized results stored on the heap. They
also provide an error state to report failures in serialization/deserialization.
This change introduces libMutagen/libclang_rt.mutagen.a as a subset of libFuzzer/libclang_rt.fuzzer.a. This library contains only the fuzzing strategies used by libFuzzer to produce new test inputs from provided inputs, dictionaries, and SanitizerCoverage feedback.
Most of this change is simply moving sections of code to one side or the other of the library boundary. The only meaningful new code is:
* The Mutagen.h interface and its implementation in Mutagen.cpp.
* The following methods in MutagenDispatcher.cpp:
* UseCmp
* UseMemmem
* SetCustomMutator
* SetCustomCrossOver
* LateInitialize (similar to the MutationDispatcher's original constructor)
* Mutate_AddWordFromTORC (uses callbacks instead of accessing TPC directly)
* StartMutationSequence
* MutationSequence
* DictionaryEntrySequence
* RecommendDictionary
* RecommendDictionaryEntry
* FuzzerMutate.cpp (which now justs sets callbacks and handles printing)
* MutagenUnittest.cpp (which adds tests of Mutagen.h)
A note on performance: This change was tested with a 100 passes of test/fuzzer/LargeTest.cpp with 1000 runs per pass, both with and without the change. The running time distribution was qualitatively similar both with and without the change, and the average difference was within 30 microseconds (2.240 ms/run vs 2.212 ms/run, respectively). Both times were much higher than observed with the fully optimized system clang (~0.38 ms/run), most likely due to the combination of CMake "dev mode" settings (e.g. CMAKE_BUILD_TYPE="Debug", LLVM_ENABLE_LTO=OFF, etc.). The difference between the two versions built similarly seems to be "in the noise" and suggests no meaningful performance degradation.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D102447
This reverts commit 6911114d8c.
Broke the QEMU sanitizer bots due to a missing header dependency. This
actually needs to be fixed on the bot-side, but for now reverting this
patch until I can fix up the bot.
This patch moves -fsanitize=scudo to link the standalone scudo library,
rather than the original compiler-rt based library. This is one of the
major remaining roadblocks to deleting the compiler-rt based scudo,
which should not be used any more. The standalone Scudo is better in
pretty much every way and is much more suitable for production usage.
As well as patching the litmus tests for checking that the
scudo_standalone lib is linked instead of the scudo lib, this patch also
ports all the scudo lit tests to run under scudo standalone.
This patch also adds a feature to scudo standalone that was under test
in the original scudo - that arguments passed to an aligned operator new
were checked that the alignment was a power of two.
Some lit tests could not be migrated, due to the following issues:
1. Features that aren't supported in scudo standalone, like the rss
limit.
2. Different quarantine implementation where the test needs some more
thought.
3. Small bugs in scudo standalone that should probably be fixed, like
the Secondary allocator having a full page on the LHS of an allocation
that only contains the chunk header, so underflows by <= a page aren't
caught.
4. Slight differences in behaviour that's technically correct, like
'realloc(malloc(1), 0)' returns nullptr in standalone, but a real
pointer in old scudo.
5. Some tests that might be migratable, but not easily.
Tests that are obviously not applicable to scudo standalone (like
testing that no sanitizer symbols made it into the DSO) have been
deleted.
After this patch, the remaining work is:
1. Update the Scudo documentation. The flags have changed, etc.
2. Delete the old version of scudo.
3. Patch up the tests in lit-unmigrated, or fix Scudo standalone.
Reviewed By: cryptoad, vitalybuka
Differential Revision: https://reviews.llvm.org/D102543
Now that everything is forcibly linker initialized, it feels like a
good time to get rid of the `init`/`initLinkerInitialized` split.
This allows to get rid of various `memset` construct in `init` that
gcc complains about (this fixes a Fuchsia open issue).
I added various `DCHECK`s to ensure that we would get a zero-inited
object when entering `init`, which required ensuring that
`unmapTestOnly` leaves the object in a good state (tests are currently
the only location where an allocator can be "de-initialized").
Running the tests with `--gtest_repeat=` showed no issue.
Differential Revision: https://reviews.llvm.org/D103119
The generic approach can still be used by musl and FreeBSD. Note: on glibc
2.31, TLS_PRE_TCB_SIZE is 0x700, larger than ThreadDescriptorSize() by 16, but
this is benign: as long as the range includes pthread::{specific_1stblock,specific}
pthread_setspecific will not cause false positives.
Note: the state before afec953857 underestimated
the TLS size a lot (nearly ThreadDescriptorSize() = 1776).
That may explain why afec953857 actually made some
tests pass.
When building with Clang 11 on Windows, silence the following:
[432/5643] Building C object projects\compiler-rt\lib\profile\CMakeFiles\clang_rt.profile-x86_64.dir\GCDAProfiling.c.obj
F:\aganea\llvm-project\compiler-rt\lib\profile\GCDAProfiling.c(464,13): warning: comparison of integers of different signs: 'uint32_t' (aka 'unsigned int') and 'int' [-Wsign-compare]
if (val != (gcov_version >= 90 ? GCOV_TAG_OBJECT_SUMMARY
~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Cast of signed types to u64 breaks comparison.
Also remove double () around operands.
Reviewed By: cryptoad, hctim
Differential Revision: https://reviews.llvm.org/D103060
Make sure that if SCUDO_DEBUG=1 in tests
then we had the same in the scudo
library itself.
Reviewed By: cryptoad, hctim
Differential Revision: https://reviews.llvm.org/D103061
Said function had a few shortfalls:
- didn't set an abort message on Android
- was logged on several lines
- didn't provide extra information like the size requested if OOM'ing
This improves the function to address those points.
Differential Revision: https://reviews.llvm.org/D103034
When trying to track down a vaddr-poisoning bug, I found that that the
secondary cache isn't emptied on test teardown. We should probably do
that to make the tests hermetic. Otherwise, repeating the tests lots of
times using --gtest_repeat fails after the mmap vaddr space is
exhausted.
To repro:
$ ninja check-scudo_standalone # build
$ ./projects/compiler-rt/lib/scudo/standalone/tests/ScudoUnitTest-x86_64-Test \
--gtest_filter=ScudoSecondaryTest.*:-ScudoSecondaryTest.SecondaryCombinations \
--gtest_repeat=10000
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D102874
Fix buildbot failure
https://lab.llvm.org/buildbot/#/builders/57/builds/6542/steps/6/logs/stdio
/llvm-project/llvm/utils/unittest/googletest/include/gtest/gtest.h:1629:28:
error: comparison of integers of different signs: 'const unsigned long'
and 'const int' [-Werror,-Wsign-compare]
GTEST_IMPL_CMP_HELPER_(GT, >);
~~~~~~~~~~~~~~~~~~~~~~~~~~^~
/llvm-project/llvm/utils/unittest/googletest/include/gtest/gtest.h:1609:12:
note: expanded from macro 'GTEST_IMPL_CMP_HELPER_'
if (val1 op val2) {\
~~~~ ^ ~~~~
/llvm-project/compiler-rt/lib/scudo/standalone/tests/common_test.cpp:30:3:
note: in instantiation of function template specialization
'testing::internal::CmpHelperGT<unsigned long, int>' requested here
EXPECT_GT(OnStart, 0);
^
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D103029
The Fuchsia allocator config was using the default size class map.
This CL gives Fuchsia its own size class map and changes a couple of
things in the default one:
- make `SizeDelta` configurable in `Config` for a fixed size class map
as it currently is for a table size class map;
- switch `SizeDelta` to 0 for the default config, it allows for size
classes that allow for power of 2s, and overall better wrt pages
filling;
- increase the max number of caches pointers to 14 in the default,
this makes the transfer batch 64/128 bytes on 32/64-bit platforms,
which is cache-line friendly (previous size was 48/96 bytes).
The Fuchsia size class map remains untouched for now, this doesn't
impact Android which uses the table size class map.
Differential Revision: https://reviews.llvm.org/D102783
This method is like StackTrace::Print but instead of printing to stderr
it copies its output to a user-provided buffer.
Part of https://reviews.llvm.org/D102451.
Reviewed By: vitalybuka, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D102815
Put allocate/deallocate next to memory
access inside EXPECT_DEATH block.
This way we reduce probability that memory is not mapped
by unrelated code.
It's still not absolutely guaranty that mmap does not
happen so we repeat it few times to be sure.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D102886
Looks like secondary pointers don't get unmapped on one of the arm32
bots. In the interests of landing some dependent patches, disable this
test on arm32 so that it can be tested in isolation later.
Reviewed By: cryptoad, vitalybuka
Split from differential patchset (1/2): https://reviews.llvm.org/D102648
The Linux kernel has removed the interface to cyclades from
the latest kernel headers[1] due to them being orphaned for the
past 13 years.
libsanitizer uses this header when compiling against glibc, but
glibcs itself doesn't seem to have any references to cyclades.
Further more it seems that the driver is broken in the kernel and
the firmware doesn't seem to be available anymore.
As such since this is breaking the build of libsanitizer (and so the
GCC bootstrap[2]) I propose to remove this.
[1] https://lkml.org/lkml/2021/3/2/153
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100379
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D102059
The Linux kernel has removed the interface to cyclades from
the latest kernel headers[1] due to them being orphaned for the
past 13 years.
libsanitizer uses this header when compiling against glibc, but
glibcs itself doesn't seem to have any references to cyclades.
Further more it seems that the driver is broken in the kernel and
the firmware doesn't seem to be available anymore.
As such since this is breaking the build of libsanitizer (and so the
GCC bootstrap[2]) I propose to remove this.
[1] https://lkml.org/lkml/2021/3/2/153
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100379
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D102059
These will be used for error propagation and handling in the ORC runtime.
The implementations of these types are cut-down versions of the error
support in llvm/Support/Error.h. Most advice on llvm::Error and llvm::Expected
(e.g. from the LLVM Programmer's manual) applies equally to __orc_rt::Error
and __orc_rt::Expected. The primary difference is the mechanism for testing
and handling error types: The ORC runtime uses a new 'error_cast' operation
to replace the handleErrors family of functions. See error_cast comments in
error.h.
If there are no counters, an mmap() of the counters section would fail
due to the size argument being too small (EINVAL).
rdar://78175925
Differential Revision: https://reviews.llvm.org/D102735
While developing a change to the allocator I ended up breaking
realloc on secondary allocations with increasing sizes. That didn't
cause any of the unit tests to fail, which indicated that we're
missing some test coverage here. Add a unit test for that case.
Differential Revision: https://reviews.llvm.org/D102716
This is a substitute for std::apply, which we can't use until we move to c++17.
apply_tuple will be used in upcoming the upcoming wrapper-function utils code.
Override __cxa_atexit and ignore callbacks.
This prevents crashes in a configuration when the symbolizer
is built into sanitizer runtime and consequently into the test process.
LLVM libraries have some global objects destroyed during exit,
so if the test process triggers any bugs after that, the symbolizer crashes.
An example stack trace of such crash:
For the standalone llvm-symbolizer this does not hurt,
we just don't destroy few global objects on exit.
Reviewed By: kda
Differential Revision: https://reviews.llvm.org/D102470
Since we have both aliasing mode and Intel LAM on x86_64, we need to
choose the mode at either run time or compile time. This patch
implements the plumbing to build both and choose between them at
compile time.
Reviewed By: vitalybuka, eugenis
Differential Revision: https://reviews.llvm.org/D102286
On AIX, we have to ship `libatomic.a` for compatibility. First, a new `clang_rt.atomic` is added. Second, use added cmake modules for AIX, we are able to build a compatible libatomic.a for AIX. The second step can't be perfectly implemented with cmake now since AIX's archive approach is kinda unique, i.e., archiving shared libraries into a static archive file.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D102155
`-fno-exceptions -fno-asynchronous-unwind-tables` compiled programs don't
produce .eh_frame on Linux and other ELF platforms, so the slow unwinder cannot
print stack traces. Just fall back to the fast unwinder: this allows
-fno-asynchronous-unwind-tables without requiring the sanitizer option
`fast_unwind_on_fatal=1`
Reviewed By: #sanitizers, vitalybuka
Differential Revision: https://reviews.llvm.org/D102046
This removes one of the last dependencies on old Scudo, and should allow
us to delete the old Scudo soon.
Reviewed By: vitalybuka, cryptoad
Differential Revision: https://reviews.llvm.org/D102349
With zero-sized allocations we don't actually end up storing the
address tag to the memory tag space, so store it in the first byte of
the chunk instead so that we can find it later in getInlineErrorInfo().
Differential Revision: https://reviews.llvm.org/D102442
It's more likely that we have a UAF than an OOB in blocks that are
more than 1 block away from the fault address, so the UAF should
appear first in the error report.
Differential Revision: https://reviews.llvm.org/D102379
On x32 size_t == unsigned int, not unsigned long int:
../../../../../src-master/libsanitizer/sanitizer_common/sanitizer_linux_libcdep.cpp: In function ??void __sanitizer::InitTlsSize()??:
../../../../../src-master/libsanitizer/sanitizer_common/sanitizer_linux_libcdep.cpp:209:55: error: invalid conversion from ??__sanitizer::uptr*?? {aka ??long unsigned int*??} to ??size_t*?? {aka ??unsigned int*??} [-fpermissive]
209 | ((void (*)(size_t *, size_t *))get_tls_static_info)(&g_tls_size, &tls_align);
| ^~~~~~~~~~~
| |
| __sanitizer::uptr* {aka long unsigned int*}
by using size_t on g_tls_size. This is to fix:
https://bugs.llvm.org/show_bug.cgi?id=50332
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D102446
The bounds check that we previously had here was suitable for secondary
allocations but not for UAF on primary allocations, where it is likely
to result in false positives. Fix it by using a different bounds check
for UAF that requires the fault address to be in bounds.
Differential Revision: https://reviews.llvm.org/D102376
We have some significant amount of duplication around
CheckFailed functionality. Each sanitizer copy-pasted
a chunk of code. Some got random improvements like
dealing with recursive failures better. These improvements
could benefit all sanitizers, but they don't.
Deduplicate CheckFailed logic across sanitizers and let each
sanitizer only print the current stack trace.
I've tried to dedup stack printing as well,
but this got me into cmake hell. So let's keep this part
duplicated in each sanitizer for now.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102221
setlocale interceptor imitates a write into result,
which may be located in .rodata section.
This is the only interceptor that tries to do this and
I think the intention was to initialize the range for msan.
So do that instead. Writing into .rodata shouldn't happen
(without crashing later on the actual write) and this
traps on my local tsan experiments.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102161
Currently we have:
sanitizer_posix_libcdep.cpp:146:27: warning: cast between incompatible
function types from ‘__sighandler_t’ {aka ‘void (*)(int)’} to ‘sa_sigaction_t’
146 | sigact.sa_sigaction = (sa_sigaction_t)SIG_DFL;
We don't set SA_SIGINFO, so we need to assign to sa_handler.
And SIG_DFL is meant for sa_handler, so this gets rid of both
compiler warning, type cast and potential runtime misbehavior.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102162
Add unit test infrastructure for the ORC runtime, plus a cut-down
extensible_rtti system and extensible_rtti unit test.
Removes the placeholder.cpp source file.
Differential Revision: https://reviews.llvm.org/D102080
This patch does a few cleanup things:
1. The non-standalone scudo has a problem where GWP-ASan allocations
may not meet alignment requirements where Scudo was requested to have
alignment >= 16. Use the new GWP-ASan API to fix this.
2. The standalone variant loses some debugging information inside of
GWP-ASan because we ask GWP-ASan to allocate an aligned size in the
frontend. This means reports end up with 'UaF on a 16-byte allocation'
for a 1-byte allocation with 16-byte alignment. Also use the new API to
fix this.
3. Add post-alloc hooks for GWP-ASan intercepted allocations, and add
stats tracking for GWP-ASan allocations.
4. Add a small test that checks the alignment of the frontend
allocator, so that it can be used under GWP-ASan torture mode.
5. Add GWP-ASan torture mode as a testing configuration to catch these
regressions.
Depends on D94830, D95889.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D95884
GWP-ASan is the "production" variant as compiled by compiler-rt, and it's useful to be able to benchmark changes in GWP-ASan or Scudo's GWP-ASan hooks across versions. GWP-ASan is sampled, and sampled allocations are much slower, but given the amount of allocations that happen under test here - we actually get a reasonable representation of GWP-ASan's negligent performance impact between runs.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D101865
According to:
https://docs.python.org/3/library/subprocess.html#subprocess.Popen.poll
poll can return None if the process hasn't terminated.
I'm not quite sure how addr2line could end up closing the pipe without
terminating but we did see this happen on one of our bots:
```
<...>scripts/asan_symbolize.py",
line 211, in symbolize
logging.debug("addr2line exited early (broken pipe), returncode=%d"
% self.pipe.poll())
TypeError: %d format: a number is required, not NoneType
```
Handle None by printing a message that we couldn't get the return
code.
Reviewed By: delcypher
Differential Revision: https://reviews.llvm.org/D101891
Address sanitizer can detect stack exhaustion via its SEGV handler, which is
executed on a separate stack using the sigaltstack mechanism. When libFuzzer is
used with address sanitizer, it installs its own signal handlers which defer to
those put in place by the sanitizer before performing additional actions. In the
particular case of a stack overflow, the current setup fails because libFuzzer
doesn't preserve the flag for executing the signal handler on a separate stack:
when we run out of stack space, the operating system can't run the SEGV handler,
so address sanitizer never reports the issue. See the included test for an
example.
This commit fixes the issue by making libFuzzer preserve the SA_ONSTACK flag
when installing its signal handlers; the dedicated signal-handler stack set up
by the sanitizer runtime appears to be large enough to support the additional
frames from the fuzzer.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D101824
Fixes compilation on Android which has a TSDSharedRegistry object in the config.
Reviewed By: cryptoad, vitalybuka
Differential Revision: https://reviews.llvm.org/D101951
Operator new must align allocations for types with large alignment.
Before c++17 behavior was implementation defined and both clang and gc++
before 11 ignored alignment. Miss-aligned objects mysteriously crashed
tests on Ubuntu 14.
Alternatives are compile with -std=c++17 or -faligned-new, but they were
discarded as less portable.
Reviewed By: hctim
Differential Revision: https://reviews.llvm.org/D101874
The problem was introduced in D100348.
It's really hard to trigger the bug in a stress test - the race is just too
narrow - but the new checks in Thread::Init should at least provide usable
diagnostic if the problem ever returns.
Differential Revision: https://reviews.llvm.org/D101881
This relates to https://reviews.llvm.org/D95835.
In DFSan origin tracking we use StackDepot to record
stack traces and origin traces (like MSan origin tracking).
For at least two reasons, we wanted to control StackDepot's memory cost
1) We may use DFSan origin tracking to monitor programs that run for
many days. This may eventually use too much memory for StackDepot.
2) DFSan supports flush shadow memory to reduce overhead. After flush,
all existing IDs in StackDepot are not valid because no one will
refer to them.
Currently, the position hint of an entry in the persistent auto
dictionary is fixed to 1. As a consequence, with a 50% chance, the entry
is applied right after the first byte of the input. As the position 1
does not appear to have any particular significance, this is likely a
bug that may have been caused by confusing the constructor parameter
with a success count.
This commit resolves the issue by preserving any existing position hint
or disabling the hint if the original entry didn't have one.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D101686
Code patterns like this are common, `#` at the line beginning
(https://google.github.io/styleguide/cppguide.html#Preprocessor_Directives),
one space indentation for if/elif/else directives.
```
#if SANITIZER_LINUX
# if defined(__aarch64__)
# endif
#endif
```
However, currently clang-format wants to reformat the code to
```
#if SANITIZER_LINUX
#if defined(__aarch64__)
#endif
#endif
```
This significantly harms readability in my review. Use `IndentPPDirectives:
AfterHash` to defeat the diagnostic. clang-format will now suggest:
```
#if SANITIZER_LINUX
# if defined(__aarch64__)
# endif
#endif
```
Unfortunately there is no clang-format option using indent with 1 for
just preprocessor directives. However, this is still one step forward
from the current behavior.
Reviewed By: #sanitizers, vitalybuka
Differential Revision: https://reviews.llvm.org/D100238
The Scudo C unit tests are currently non-hermetic. In particular, adding
or removing a transfer batch is a global state of the allocator that
persists between tests. This can cause flakiness in
ScudoWrappersCTest.MallInfo, because the creation or teardown of a batch
causes mallinfo's uordblks or fordblks to move up or down by the size of
a transfer batch on malloc/free.
It's my opinion that uordblks and fordblks should track the statistics
related to the user's malloc() and free() usage, and not the state of
the internal allocator structures. Thus, excluding the transfer batches
from stat collection does the trick and makes these tests pass.
Repro instructions of the bug:
1. ninja ./projects/compiler-rt/lib/scudo/standalone/tests/ScudoCUnitTest-x86_64-Test
2. ./projects/compiler-rt/lib/scudo/standalone/tests/ScudoCUnitTest-x86_64-Test --gtest_filter=ScudoWrappersCTest.MallInfo
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D101653
In the overwrite branch of MutationDispatcher::ApplyDictionaryEntry in
FuzzerMutate.cpp, the index Idx at which W.size() bytes are overwritten
with the word W is chosen uniformly at random in the interval
[0, Size - W.size()). This means that Idx + W.size() will always be
strictly less than Size, i.e., the last byte of the current unit will
never be overwritten.
This is fixed by adding 1 to the exclusive upper bound.
Addresses https://bugs.llvm.org/show_bug.cgi?id=49989.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D101625
Currently we have a bit of a mess related to tids:
- sanitizers re-declare kInvalidTid multiple times
- some call it kUnknownTid
- implicit assumptions that main tid is 0
- asan/memprof claim their tids need to fit into 24 bits,
but this does not seem to be true anymore
- inconsistent use of u32/int to store tids
Introduce kInvalidTid/kMainTid in sanitizer_common
and use them consistently.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101428
Commit efd254b636 ("tsan: fix deadlock in pthread_atfork callbacks")
fixed another deadlock related to atfork handling.
But builders with DCHECKs enabled reported failures of
pthread_atfork_deadlock2.c and pthread_atfork_deadlock3.c tests
related to the fact that we hold runtime locks on interceptor exit:
https://lab.llvm.org/buildbot/#/builders/70/builds/6727
This issue is somewhat inherent to the current approach,
we indeed execute user code (atfork callbacks) with runtime lock held.
Refactor fork handling to not run user code (atfork callbacks)
with runtime locks held. This change does this by installing
own atfork callbacks during runtime initialization.
Atfork callbacks run in LIFO order, so the expectation is that
our callbacks run last, right before the actual fork.
This way we lock runtime mutexes around fork, but not around
user callbacks.
Extend tests to also install after fork callbacks just to cover
more scenarios. Some tests also started reporting real races
that we previously suppressed.
Also extend tests to cover fork syscall support.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101517
This is to help review refactor the allocator code.
So it is easy to see which are the real public interfaces.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101586
To see how to extract a shared allocator interface for D101204,
found some unused code. Tests passed. Are they safe to remove?
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101559
We've got a user report about heap block allocator overflow.
Bump the L1 capacity of all dense slab allocators to maximum
and be careful to not page the whole L1 array in from .bss.
If OS uses huge pages, this still may cause a limited RSS increase
due to boundary huge pages, but avoiding that looks hard.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101161
While implementing support for the float128 routines on x86_64, I noticed
that __builtin_isinf() was returning true for 128-bit floating point
values that are not infinite when compiling with GCC and using the
compiler-rt implementation of the soft-float comparison functions.
After stepping through the assembly, I discovered that this was caused by
GCC assuming a sign-extended 64-bit -1 result, but our implementation
returns an enum (which then has zeroes in the upper bits) and therefore
causes the comparison with -1 to fail.
Fix this by using a CMP_RESULT typedef and add a static_assert that it
matches the GCC soft-float comparison return type when compiling with GCC
(GCC has a __libgcc_cmp_return__ mode that can be used for this purpose).
Also move the 3 copies of the same code to a shared .inc file.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D98205
COMPILER_RT_TSAN_DEBUG_OUTPUT enables TSAN_COLLECT_STATS,
which changes layout of runtime structs (some structs contain
stats when the option is enabled).
It's not OK to build runtime with the define, but tests without it.
The error is detected by build_consistency_stats/nostats.
Fix this by defining TSAN_COLLECT_STATS for tests to match the runtime.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101386
Commit efd254b636 ("tsan: fix deadlock in pthread_atfork callbacks")
fixed another deadlock related to atfork handling.
But builders with DCHECKs enabled reported failures of
pthread_atfork_deadlock2.c and pthread_atfork_deadlock3.c tests
related to the fact that we hold runtime locks on interceptor exit:
https://lab.llvm.org/buildbot/#/builders/70/builds/6727
This issue is somewhat inherent to the current approach,
we indeed execute user code (atfork callbacks) with runtime lock held.
Refactor fork handling to not run user code (atfork callbacks)
with runtime locks held. This change does this by installing
own atfork callbacks during runtime initialization.
Atfork callbacks run in LIFO order, so the expectation is that
our callbacks run last, right before the actual fork.
This way we lock runtime mutexes around fork, but not around
user callbacks.
Extend tests to also install after fork callbacks just to cover
more scenarios. Some tests also started reporting real races
that we previously suppressed.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101385
We take report/thread_registry locks around fork.
This means we cannot report any bugs in atfork handlers.
We resolved this by enabling per-thread ignores around fork.
This resolved some of the cases, but not all.
The added test triggers a race report from a signal handler
called from atfork callback, we reset per-thread ignores
around signal handlers, so we tried to report it and deadlocked.
But there are more cases: a signal handler can be called
synchronously if it's sent to itself. Or any other report
types would cause deadlocks as well: mutex misuse,
signal handler spoiling errno, etc.
Disable all reports for the duration of fork with
thr->suppress_reports and don't re-enable them around
signal handlers.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D101154
This is undefined if SANITIZER_SYMBOLIZER_MARKUP is 1, which is the case for
Fuchsia, and will result in a undefined symbol error. This function is needed
by hwasan for online symbolization, but is not needed for us since we do
offline symbolization.
Differential Revision: https://reviews.llvm.org/D99386
Dmitry Vyukov