Sadly IPv6 is still not present anywhere. The test was attempting to
detect&skip such hosts, but the way it did that (essentially, by calling
getaddrinfo) meant that it only detected hosts which have IPv6 support
completely compiled out. It did not do anything about hosts which have
it compiled in, but lack runtime configuration even for the ::1 loopback
address.
This patch changes the detection logic to use a new method. It does it
by attempting to bind a socket to the appropriate loopback address. That
should ensure the hosts loopback interface is fully set up. In an effort
to avoid silently skipping the test on too many hosts, the test is
fairly strict about the kind of error it expects in these cases -- it
will only skip the test when receiving EADDRNOTAVAIL. If we find other
error codes that can be reasonably returned in these situations, we can
add more of them.
The (small) change in TCPSocket.cpp is to ensure that the code correctly
propagates the error received from the OS.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
This warning triggers when a class defines a copy constructor but not a
copy-assignment operator (which then gets auto-generated by the
compiler). Fix the warning by deleting the other operator too, as the
default implementation works just fine.
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Summary:
My main goal here is to make lldb-server work with Android Studio.
This is currently not the case because lldb-server is started in platform mode listening on a domain socket. When Android Studio connects to it lldb-server crashes because even though it's listening on a domain socket as soon as it gets a connection it asserts that it's a TCP connection, which will obviously fails for any non-tcp connection.
To do this I came up with a new method called GetConnectURI() in Socket that returns the URI needed to connect to the connected portion of the socket.
Reviewers: labath, clayborg, xiaobai
Reviewed By: labath
Subscribers: mgorny, jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62089
llvm-svn: 362173
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 329697
The socket bind address should either be localhost or anyaddress. This bug in the listen behavior was preventing lldb-server from opening sockets for non-localhost connections.
The added test verifies that opening an anyaddress socket works and has a non-zero port assignment.
This should resolve PR34183.
llvm-svn: 312008
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
before r301492, we could specify "*:1234" as an address to lldb-server
and it would interpret that as "any". I am not sure that's a good idea,
but we have usages of that in the test suite, and without this the
remote test suite fails.
I'm adding that back, as it does not seem it was an intended side-effect
of that change, but I am open to removing it in the future, after
discussion and test suite fixup.
llvm-svn: 301534
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Summary:
In the case of client sockets, we are not binding to a specific port, so we
should be able to just request a new one. Disregarding refactors, this code
has been here since the initial LLDB checkin, so I was unable to figure out
whether it was added as a fix for a specific problem, or just for symmetry
with server sockets, but I see no side-effect from removing it now. I was
still able to create 10000 connections within a couple of seconds, so I think
it's unlikely we will exhaust the port space (previously, I would get an
error after a couple thousand connections).
This fixes an occasional issue with connecting to the android debug bridge
deamon on OSX when running the test suite, which would occasionaly fail with
EADDRINUSE. My best guess is that this was happening because two processes
were assigned the same client port number, and then things blew up because
they were both trying to connect to the same ADB server port. I have not
observed this issue happening on Linux or Windows.
Reviewers: clayborg
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D21088
llvm-svn: 272041
Raphael Isemann