This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
This issue was introduced in https://reviews.llvm.org/D92187.
The guard I'm changing were is supposed to act when linux is loading the linker for the second time (due to differences in paths like symlinks).
This is done by checking `module_sp != m_interpreter_module.lock()` however this will be true when `m_interpreter_module` wasn't initialized, making linux unload the linker module (the most visible result here is that lldb will stop getting notified about new modules loaded by the process, because it can't set the rendezvous breakpoint again after the stepping over it once).
The `m_interpreter_module` is not getting initialize when it goes through this path: dbfdb139f7/lldb/source/Plugins/DynamicLoader/POSIX-DYLD/DynamicLoaderPOSIXDYLD.cpp (L332), which happens when lldb was able to read the address from the dynamic section of the executable.
What I'm not sure about though, is if when we go through this path if we still load the linker twice on linux. If that's the case then it means we need to somehow set the m_interpreter_module instead of the fix I provide here. I've only tested this on Android.
Differential Revision: https://reviews.llvm.org/D96637
Fix the POSIX-DYLD plugin to update the cached executable path after
attaching. Previously, the path was cached in DYLDRendezvous
constructor and not updated afterwards. This meant that if LLDB was
attaching to a process (e.g. via connecting to lldb-server), the code
stored the empty path before DidAttach() resolved it. The fix updates
the cached path in DidAttach().
This fixes a new instance of https://llvm.org/pr17880
Differential Revision: https://reviews.llvm.org/D92264
Explicitly consider the libraries reported on the initial rendezvous
breakpoint hit added. This is necessary on FreeBSD since the dynamic
loader issues only a single 'consistent' state rendezvous breakpoint hit
for all the libraries present in DT_NEEDED. It is also helpful on Linux
where it ensures that ld-linux is considered loaded as well
as the shared system libraries reported afterwards.
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
Explicitly consider the libraries reported on the initial eTakeSnapshot
action added, through adding them to the added soentry list
in DYLDRendezvous::SaveSOEntriesFromRemote(). This is necessary
on FreeBSD since the dynamic loader issues only a single 'consistent'
state rendezvous breakpoint hit for all the libraries present
in DT_NEEDED (while Linux issues an added-consistent event pair).
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Use LLDB_PLUGIN_DEFINE_ADV to make the name of the generated initializer
match the name of the plugin. This is a step towards generating the
initializers with a def file. I'm landing this change in pieces so I can
narrow down what exactly breaks the Windows bot.
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
The previously landed patch got reverted because it was lacking:
(1) A plugin definition for the Objective-C language runtime,
(2) The dependency between the Static and WASM dynamic loader,
(3) Explicit initialization of ScriptInterpreterNone for lldb-test.
All issues have been addressed in this patch.
Differential revision: https://reviews.llvm.org/D73067
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
Differential revision: https://reviews.llvm.org/D73067
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
This patch removes the size_t return value and the append parameter
from the remainder of the Find.* functions in LLDB's internal API. As
in the previous patches, this is motivated by the fact that these
parameters aren't really used, and in the case of the append parameter
were frequently implemented incorrectly.
Differential Revision: https://reviews.llvm.org/D69119
llvm-svn: 375160
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
Summary:
Here's a replacement for D62504. I thought I could use LoadModules to implement this but in reality I can't because there are at few issues with it:
* The LoadModules assumes that the list returned by GetLoadedModuleList is comprehensive in the sense that reflects all the mapped segments, however, this is not true, for instance VDSO entry is not there since it's loaded manually by LoadVDSO using GetMemoryRegionInfo and it doesn't represent a specific shared object in disk. Because of this LoadModules will unload the VDSO module.
* The loader (interpreter) module might have also been loaded using GetMemoryRegionInfo, this is true when we launch the process and the rendezvous structure is not yet available (done through LoadInterpreterModule()). The problem here is that this entry will point to the same file name as the one found in /proc/pid/maps, however, when we read the same module from the r_debug.link_map structure it might be under a different name. This is true at least on CentOS where the loader is a symlink. Because of this LoadModules will unload and load the module in a way where the rendezvous breakpoint is unresolved but not resolved again (because we add the new module first and remove the old one after).
The symlink issue might be fixable by first unloading the old and loading the news (but sounds super brittle), however, I'm not sure how to fix the VDSO issue.
Since I can't trust it I'm just going to use GetLoadedModuleList directly with the same logic that we use today for when we read the linked list in lldb. The only safe thing to do here is to only calculate differences between different snapshots of the svr4 packet itself. This will also cut the dependency this plugin has from LoadModules.
I separated the 2 logics into 2 different functions (remote and not remote) because I don't like mixing 2 different logics in the same function with if/else's. Two different functions makes it easier to reason with I believe. However, I did abstract away the logic that decides if we should take a snapshot or add/remove modules so both functions could reuse it.
The other difference between the two is that on the UpdateSOEntriesFromRemote I take the snapshot only once when state = Consistent because I didn't find a good reason to always update that, as we already got the list from state = Add | Remove. I probably should use the same logic on UpdateSOEntries though I don't see a reason not to since it's really using the same data, just read in different places. Any thoughts here?
It might also be worthwhile to add a test to make sure we don't unload modules that were not actually "unloaded" like the vdso. I haven't done this yet though.
This diff is also missing the option for svr4 like proposed in https://reviews.llvm.org/D62503#1564296, I'll start working on this but wanted to have this up first.
Reviewers: labath, jankratochvil, clayborg, xiaobai
Reviewed By: labath
Subscribers: srhines, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64013
llvm-svn: 367020
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Summary:
This is the second patch to improve module loading in a series that started here (where I explain the motivation and solution): https://reviews.llvm.org/D62499
I need to read the aux vector to know where the r_debug map with the loaded libraries are.
The AuxVector class was made generic so it could be reused between the POSIX-DYLD plugin and NativeProcess*. The class itself ended up in the ProcessUtility plugin.
Reviewers: clayborg, xiaobai, labath, JDevlieghere
Reviewed By: clayborg, labath, JDevlieghere
Subscribers: emaste, JDevlieghere, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62500
llvm-svn: 363098
Summary:
Once we've attached to the process we load all current modules and also set a breakpoint at the rendezvous break address.
However, we don't do this if we already have a load address for the image info address (e.g.: DT_DEBUG on ELF). This code was added 4 years ago when adding support for `$qXfer:Libraries:` packet (https://reviews.llvm.org/D9471) but its intention is not 100% clear to me. It seems to me we're using that check to know if the modules have already been loaded (which they have if `$qXfer:Libraries:` is supported by the gdb server) and skip loading the modules again in the following `if` block. The problem is that we also skip setting the Rendezvous breakpoint so we stop knowing when the process loads new modules.
I fix this by moving the call to set the breakpoint to the end of the function so we always call it as long as we have a valid executable.
Reviewers: ADodds, clayborg, eugene, labath
Reviewed By: eugene, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62168
llvm-svn: 362619
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Add a flag to control whether the ModulesDidLoad notification is
called when a module is added. If the notifications are disabled,
the caller must call ModulesDidLoad after adding all the new modules,
but postponing this notification until they're all batched up can
allow for better efficiency than notifying one-by-one.
Change the name of the ModuleList notifier functions that a subclass
can implement to start with 'Notify' to make it clear what they are.
Add a NotifyModulesRemoved.
Add header documentation for the changed/updated methods.
Added defaulted-value 'notify' argument to ModuleList Append,
AppendIfNeeded, and Remove because callers working with a local
ModuleList don't have an obvious idea of what notify means in this
context. When the ModuleList is a part of the Target class, the
notify behavior matters.
DynamicLoaderDarwin has been updated so that libraries being
added/removed are correctly batched up before notifications are
sent. Added the TestModuleLoadedNotifys.py test to run on
Darwin to test this.
<rdar://problem/48293064>
Differential Revision: https://reviews.llvm.org/D60172
llvm-svn: 357955
There are set of classes in Target that describe the parameters of a
process - e.g. it's PID, name, user id, and similar. However, since it
is a bare description of a process and contains no actual functionality,
there's nothing specifically that makes this appropriate for being in
Target -- it could just as well be describing a process on the host, or
some hypothetical virtual process that doesn't even exist.
To cement this, I'm moving these classes to Utility. It's possible that
we can find a better place for it in the future, but as it is neither
Host specific nor Target specific, Utility seems like the most appropriate
place for the time being.
After this there is only 2 remaining references to Target from Host,
which I'll address in a followup.
Differential Revision: https://reviews.llvm.org/D58842
llvm-svn: 355342
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
LLVM added wrappers to std::sort (r327219) that randomly shuffle the
container before sorting. The goal is to uncover non-determinism due to
undefined sorting order of objects having the same key.
This can be enabled with -DLLVM_ENABLE_EXPENSIVE_CHECKS=ON.
llvm-svn: 350679
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
Summary:
This has multiple advantages:
- we need only one function argument/instance variable instead of three
- no need to default initialize variables
- no custom parsing code
- VersionTuple has comparison operators, which makes version comparisons much
simpler
Reviewers: zturner, friss, clayborg, jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D47889
llvm-svn: 334950
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
This brings the LLDB configuration closer to LLVM's and removes visual
clutter in the source code by removing the @brief commands from
comments.
This patch also reflows the paragraphs in all doxygen comments.
See also https://reviews.llvm.org/D46290.
Differential Revision: https://reviews.llvm.org/D46321
llvm-svn: 331373
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
This is r322209, but with fixed VDSO loading fixed.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322251
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322209
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Jonas Devlieghere