Summary:
First part of a fix for JITed code debugging. This has been a regression from 5.0 to 6.0 and it's is still reproducible on current master: https://bugs.llvm.org/show_bug.cgi?id=36209
The address of the breakpoint site is corrupt: the 0x4 value we end up with, looks like an offset on a zero base address. When we parse the ELF section headers from the JIT descriptor, the load address for the text section we find in `header.sh_addr` is correct.
The bug manifests in `VMAddressProvider::GetVMRange(const ELFSectionHeader &)` (follow it from `ObjectFileELF::CreateSections()`). Here we think the object type was `eTypeObjectFile` and unleash some extra logic [1] which essentially overwrites the address with a zero value.
The object type is deduced from the ELF header's `e_type` in `ObjectFileELF::CalculateType()`. It never returns `eTypeJIT`, because the ELF header has no representation for it [2]. Instead the in-memory ELF object states `ET_REL`, which leads to `eTypeObjectFile`. This is what we get from `lli` at least since 3.x. (Might it be better to write `ET_EXEC` on the JIT side instead? In fact, relocations were already applied at this point, so "Relocatable" is not quite exact.)
So, this patch proposes to set `eTypeJIT` explicitly whenever we read from a JIT descriptor. In `ObjectFileELF::CreateSections()` we can then call `GetType()`, which returns the explicit value or otherwise falls back to `CalculateType()`.
LLDB then sets the breakpoint successfully. Next step: debug info.
```
Process 1056 stopped
* thread #1, name = 'lli', stop reason = breakpoint 1.2
frame #0: 0x00007ffff7ff7000 JIT(0x3ba2030)`jitbp()
JIT(0x3ba2030)`jitbp:
-> 0x7ffff7ff7000 <+0>: pushq %rbp
0x7ffff7ff7001 <+1>: movq %rsp, %rbp
0x7ffff7ff7004 <+4>: movabsq $0x7ffff7ff6000, %rdi ; imm = 0x7FFFF7FF6000
0x7ffff7ff700e <+14>: movabsq $0x7ffff6697e80, %rcx ; imm = 0x7FFFF6697E80
```
[1] It was first introduced with https://reviews.llvm.org/D38142#change-lF6csxV8HdlL, which has also been the original breaking change. The code has changed a lot since then.
[2] ELF object types: https://github.com/llvm/llvm-project/blob/2d2277f5/llvm/include/llvm/BinaryFormat/ELF.h#L110
Reviewers: labath, JDevlieghere, bkoropoff, clayborg, espindola, alexshap, stella.stamenova
Reviewed By: labath, clayborg
Subscribers: probinson, emaste, aprantl, arichardson, MaskRay, AlexDenisov, yurydelendik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61611
llvm-svn: 360354
Summary:
When we want to compare a ConstString against a string literal (or any other non-ConstString),
we currently have to explicitly turn the other string into a ConstString. This makes sense as
comparing ConstStrings against each other is only a fast pointer comparison.
However, currently we (rather incorrectly) use in several places in LLDB temporary ConstStrings when
we just want to compare a given ConstString against a hardcoded value, for example like this:
```
if (extension != ConstString(".oat") && extension != ConstString(".odex"))
```
Obviously this kind of defeats the point of ConstStrings. In the comparison above we would
construct two temporary ConstStrings every time we hit the given code. Constructing a
ConstString is relatively expensive: we need to go to the StringPool, take a read and possibly
an exclusive write-lock and then look up our temporary string in the string map of the pool.
So we do a lot of heavy work for essentially just comparing a <6 characters in two strings.
I initially wanted to just fix these issues by turning the temporary ConstString in static variables/
members, but that made the code much less readable. Instead I propose to add a new overload
for the ConstString comparison operator that takes a StringRef. This comparison operator directly
compares the ConstString content against the given StringRef without turning the StringRef into
a ConstString.
This means that the example above can look like this now:
```
if (extension != ".oat" && extension != ".odex")
```
It also no longer has to unlock/lock two locks and call multiple functions in other TUs for constructing
the temporary ConstString instances. Instead this should end up just being a direct string comparison
of the two given strings on most compilers.
This patch also directly updates all uses of temporary and short ConstStrings in LLDB to use this new
comparison operator. It also adds a some unit tests for the new and old comparison operator.
Reviewers: #lldb, JDevlieghere, espindola, amccarth
Reviewed By: JDevlieghere, amccarth
Subscribers: amccarth, clayborg, JDevlieghere, emaste, arichardson, MaskRay, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60667
llvm-svn: 359281
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
My apologies for the large patch. With the exception of ConstString.h
itself it was entirely produced by sed.
ConstString has exactly one const char * data member, so passing a
ConstString by reference is not any more efficient than copying it by
value. In both cases a single pointer is passed. But passing it by
value makes it harder to accidentally return the address of a local
object.
(This fixes rdar://problem/48640859 for the Apple folks)
Differential Revision: https://reviews.llvm.org/D59030
llvm-svn: 355553
Summary:
This file implements some general purpose data structures, and so it
belongs to the Utility module.
Reviewers: zturner, jingham, JDevlieghere, clayborg, espindola
Subscribers: emaste, mgorny, javed.absar, arichardson, MaskRay, lldb-commits
Differential Revision: https://reviews.llvm.org/D58970
llvm-svn: 355509
Summary:
These functions should always return the opposite of the
`Triple{Environment,OS,Vendor}WasSpecified` functions. Unspecified unknown is
the same as unspecified, which is why one set of functions should give us what
we want. It's possible to have specified unknown, which is why we can't just
rely on checking the enum values of vendor/os/environment. We must also ensure
that the names of these are empty and not "unknown".
Differential Revision: https://reviews.llvm.org/D58653
llvm-svn: 354933
Split the recognition into NetBSD executables & shared libraries
and core(5) files.
Introduce new owner type: "NetBSD-CORE", as core(5) files are not tagged
in the same way as regular NetBSD executables.
Stop using incorrectly ABI_TAG and ABI_SIZE. Introduce IDENT_TAG,
IDENT_DECSZ, IDENT_NAMESZ and PROCINFO.
The new values detect correctly the NetBSD images.
The patch has been originally written by Kamil Rytarowski. I've added
tests and applied minor code changes per review. The work has been
sponsored by the NetBSD Foundation.
Differential Revision: https://reviews.llvm.org/D42870
llvm-svn: 354466
Summary:
This is a preparatory step to enable adding extra unwind strategies by
symbol file plugins. This has been discussed on the lldb-dev mailing
list: <http://lists.llvm.org/pipermail/lldb-dev/2019-February/014703.html>.
Reviewers: jasonmolenda, clayborg, espindola
Subscribers: lemo, emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D58129
llvm-svn: 354033
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
instead of returning the UUID through by-ref argument and a boolean
value indicating success, we can just return it directly. Since the UUID
class already has an invalid state, it can be used to denote the failure
without the additional bool.
llvm-svn: 353714
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The code was assuming that the elf file will have a PT_LOAD segment
starting from the first byte of the file. While this is true for files
generated by most linkers (it's a way of saving space), it is not a
requirement. And files not satisfying this constraint can still be
perfectly executable. yaml2obj is one of the tools which produces files
like this.
This patch relaxes the check in ObjectFileELF to take the address of the
first PT_LOAD segment as the base address of the object (instead of the
one with the offset 0). Since the PT_LOAD segments are supposed to be
sorted according to the VM address, this entry will also be the one with
the lowest VM address.
If we ever run into files which don't have the PT_LOAD segments sorted,
we can easily change this code to return the lowest VM address as the
base address (if that is the correct thing to do for these files).
llvm-svn: 350923
Summary:
The concept of a base address was already present in the implementation
(it's needed for computing section load addresses properly), but it was
never exposed through this function. This fixes that.
llvm-svn: 350804
Summary:
This is the result of the discussion in D55356, where it was suggested
as a solution to representing the addresses that logically belong to a
module in memory, but are not a part of any of its sections.
The ELF PT_LOAD segments are similar to the MachO "load commands",
except that the relationship between them and the object file sections
is a bit weaker. While in the MachO case, the sections belonging to a
specific segment are placed directly inside it in the object file
logical structur, in the ELF case, the sections and segments form two
separate hierarchies. This means that it is in theory possible to create
an elf file where only a part of a section would belong to some segment
(and another part to a different one). However, I am not aware of any
tool which would produce such a file (and most tools will have problems
ingesting them), so this means it is still possible to follow the MachO
model and make sections children of the PT_LOAD segments.
In case we run into (corrupt?) files with overlapping sections, I have
added code (and tests) which adjusts the sizes and/or drops the offending
sections in order to present a reasonable image to the upper layers of
LLDB. This is mostly done for completeness, as I don't anticipate
running into this situation in the real world. However, if we do run
into it, and the current behavior is not suitable for some reason, we
can implement this logic differently.
Reviewers: clayborg, jankratochvil, krytarowski, joerg, espindola
Subscribers: emaste, arichardson, lldb-commits
Differential Revision: https://reviews.llvm.org/D55998
llvm-svn: 350742
Summary:
instead of returning the architecture through by-ref argument and a
boolean value indicating success, we can just return the ArchSpec
directly. Since the ArchSpec already has an invalid state, it can be
used to denote the failure without the additional bool.
Reviewers: clayborg, zturner, espindola
Subscribers: emaste, arichardson, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D56129
llvm-svn: 350291
Summary:
The first section header does not define a real section. Instead it is
used for various elf extensions. This patch skips creation of a section
for index 0.
This has one furtunate side-effect, in that it allows us to use the section
header index as the Section ID (where 0 is also invalid). This way, we
can get rid of a lot of spurious +1s in the ObjectFileELF code.
Reviewers: clayborg, krytarowski, joerg, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D55757
llvm-svn: 349498
Summary:
This patch attempts to move as much code as possible out of the
CreateSections function to make room for future improvements there. Some
of this may be slightly over-engineered (VMAddressProvider), but I
wanted to keep the logic of this function very simple, because once I
start taking segment headers into acount (as discussed in D55356), the
function is going to grow significantly.
While in there, I also added tests for various bits of functionality.
This should be NFC, except that I changed the order of hac^H^Heuristicks
for determining section type slightly. Previously, name-based deduction
(.symtab -> symtab) would take precedence over type-based (SHT_SYMTAB ->
symtab) one. In fact we would assert if we ran into a .text section with
type SHT_SYMTAB. Though unlikely to matter in practice, this order
seemed wrong to me, so I have inverted it.
Reviewers: clayborg, krytarowski, espindola
Subscribers: emaste, arichardson, lldb-commits
Differential Revision: https://reviews.llvm.org/D55706
llvm-svn: 349268
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
Move code into a separate function, and replace the if-else chain with
llvm::StringSwitch.
A slight behavioral change is that now I use the section flags
(SHF_TLS) instead of the section name to set the thread-specific
property. There is no explanation in the original commit introducing
this (r153537) as to why that was done this way, but the new behavior
should be more correct.
llvm-svn: 348936
Instead of GetProgramHeaderCount+GetProgramHeaderByIndex, expose an
ArrayRef of all program headers, to enable range-based iteration.
Instead of GetSegmentDataByIndex, expose GetSegmentData, taking a
program header (reference).
This makes the code simpler by enabling range-based loops and also
allowed to remove some null checks, as it became locally obvious that
some pointers can never be null.
llvm-svn: 348928
Test cases were updated to not use the local compilation dir which
is different between development pc and build bots.
Original commit message:
[LLDB] - Support the single file split DWARF.
DWARF5 spec describes a single file split dwarf case
(when .dwo sections are in the .o files).
Problem is that LLDB does not work correctly in that case.
The issue is that, for example, both .debug_info and .debug_info.dwo
has the same type: eSectionTypeDWARFDebugInfo. And when code searches
section by type it might find the regular debug section
and not the .dwo one.
The patch fixes that. With it, LLDB is able to work with
output compiled with -gsplit-dwarf=single flag correctly.
Differential revision: https://reviews.llvm.org/D52403
llvm-svn: 346855
DWARF5 spec describes a single file split dwarf case
(when .dwo sections are in the .o files).
Problem is that LLDB does not work correctly in that case.
The issue is that, for example, both .debug_info and .debug_info.dwo
has the same type: eSectionTypeDWARFDebugInfo. And when code searches
section by type it might find the regular debug section
and not the .dwo one.
The patch fixes that. With it, LLDB is able to work with
output compiled with -gsplit-dwarf=single flag correctly.
Differential revision: https://reviews.llvm.org/D52296
llvm-svn: 346848
Summary:
pcm files can end up being processed by lldb with relocations to be
made for the .debug_info section. When a R_AARCH64_ABS64 relocation
was required lldb would hit an `assert(false)` and die.
Add R_AARCH64_ABS64 relocations to the S+A 64 bit width code path. Add
a test for R_AARCH64_ABS64 and R_AARCH64_ABS32 .rela.debug_info
relocations in a pcm file.
Reviewers: sas, xiaobai, davide, javed.absar, espindola
Reviewed By: davide
Subscribers: labath, zturner, emaste, mgorny, arichardson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D51566
llvm-svn: 346171
Summary:
This patch adds possibility of searching a public symbol with name and type in a
symbol file. It is helpful when working with PE, because PE's symtabs contain
only imported / exported symbols only. Such a search is required for e.g.
evaluation of an expression that calls some function of the debuggee.
Reviewers: zturner, asmith, labath, clayborg, espindola
Reviewed By: clayborg
Subscribers: emaste, arichardson, aleksandr.urakov, jingham, lldb-commits, stella.stamenova
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53368
llvm-svn: 345957
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the GetByteSize method from FileSpec and updates its
uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53788
llvm-svn: 345812
This implements the support for .debug_loclists section, which is
DWARF 5 version of .debug_loc.
Currently, clang is able to emit it with the use of D53365.
Differential revision: https://reviews.llvm.org/D53436
llvm-svn: 345016
This adds a basic support of the .debug_rnglists section.
Only the DW_RLE_start_length and DW_RLE_end_of_list entries are supported.
Differential revision: https://reviews.llvm.org/D52981
llvm-svn: 344119
This patch improves the support of DWARF5.
Particularly the reporting of source code locations.
Differential revision: https://reviews.llvm.org/D51935
llvm-svn: 342153
Summary:
.rela.debug_info relocations are being done via
ObjectFileELF::ApplyRelocations for aarch64. Currently, the switch case
that iterates over the relocation type is only implemented for a few
different types and `assert(false)`es over the rest.
Implement the relocation for R_AARCH64_ABS32 in ApplyRelocations
Reviewers: sas, xiaobai, javed.absar, espindola
Reviewed By: sas
Subscribers: emaste, arichardson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D50369
Change by Nathan Lanza <lanza@fb.com>
llvm-svn: 339974
This change improves the logging for the lldb.module category to note a few interesting cases:
1. Local object file found, but specs not matching
2. Local object file not found, using a placeholder module
The handling and logging for the cases wehre we fail to load compressed dwarf
symbols is also improved.
Differential Revision: https://reviews.llvm.org/D50274
llvm-svn: 339161
Summary:
.rela.debug_info relocations are being done via
ObjectFileELF::ApplyRelocations for aarch64. Currently, the switch case
that iterates over the relocation type is only implemented for a few
different types and `assert(false)`es over the rest.
Implement the relocation for R_AARCH64_ABS32 in ApplyRelocations
Reviewers: sas, xiaobai, peter.smith, clayborg, javed.absar, espindola
Differential Revision: https://reviews.llvm.org/D49407
Change by Nathan Lanza <lanza@fb.com>
llvm-svn: 339068
Summary:
The data structure is optimized for the case where the UUID size is <=
20 bytes (standard length emitted by the GNU linkers), but larger sizes
are also possible.
I've modified the string conversion function to support the new sizes as
well. For standard UUIDs it maintains the traditional formatting
(4-2-2-2-6). If a UUID is shorter, we just cut this sequence short, and
for longer UUIDs it will just repeat the last 6-byte block as long as
necessary.
I've also modified ObjectFileELF to take advantage of the new UUIDs and
avoid manually padding the UUID to 16 bytes. While there, I also made
sure the computed UUID does not depend on host endianness.
Reviewers: clayborg, lemo, sas, davide, espindola
Subscribers: emaste, arichardson, lldb-commits
Differential Revision: https://reviews.llvm.org/D48633
llvm-svn: 335963
Summary:
During the previous attempt to generalize the UUID class, it was
suggested that we represent invalid UUIDs as length zero (previously, we
used an all-zero UUID for that). This meant that some valid build-ids
could not be represented (it's possible however unlikely that a checksum of
some file would be zero) and complicated adding support for variable
length build-ids (should a 16-byte empty UUID compare equal to a 20-byte
empty UUID?).
This patch resolves these issues by introducing a canonical
representation for an invalid UUID. The slight complication here is that
some clients (MachO) actually use the all-zero notation to mean "no UUID
has been set". To keep this use case working (while making it very
explicit about which construction semantices are wanted), replaced the
UUID constructors and the SetBytes functions with named factory methods.
- "fromData" creates a UUID from the given data, and it treats all bytes
equally.
- "fromOptionalData" first checks the data contents - if all bytes are
zero, it treats this as an invalid/empty UUID.
Reviewers: clayborg, sas, lemo, davide, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D48479
llvm-svn: 335612
If we have a function with signature f(addr_t, AddressClass), it is easy to muddle up the order of arguments without any warnings from compiler. 'enum class' prevents passing integer in place of AddressClass and vice versa.
llvm-svn: 335599
With the recent changes in FileSpec to use LLVM's path style, it is
possible to delegate a bunch of common path operations to LLVM's path
helpers. This means we only have to maintain a single implementation and
at the same time can benefit from the efforts made by the rest of the
LLVM community.
This is part one of a set of patches. There was no obvious way to split
this so I just worked from top to bottom.
Differential revision: https://reviews.llvm.org/D48084
llvm-svn: 334615
This reverts commit r332162 as it breaks the bots (Ubuntu 14.04)
with the following message:
Build Command Output:
objcopy: option '--compress-debug-sections' doesn't allow an argument
llvm-svn: 332165
In an effort to make the .debug_types patch smaller, breaking out the part that reads the .debug_types from object files into a separate patch
Differential Revision: https://reviews.llvm.org/D46529
llvm-svn: 331777
This brings the LLDB configuration closer to LLVM's and removes visual
clutter in the source code by removing the @brief commands from
comments.
This patch also reflows the paragraphs in all doxygen comments.
See also https://reviews.llvm.org/D46290.
Differential Revision: https://reviews.llvm.org/D46321
llvm-svn: 331373
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
ObjectFileELF assumes that code section has ".text" name. There is an
exception for kalimba toolchain that can use arbitrary names, but other
toolchains also could use arbitrary names for code sections. For
example, corert uses separate section for compiled managed code. As lldb
doesn't recognize such section it leads to problem with breakpoints on
arm, because debugger cannot determine instruction set (arm/thumb) and
uses incorrect breakpoint opcode that breaks program execution.
This change allows debugger to correctly handle such code sections. We
assume that section is a code section if it has SHF_EXECINSTR flag set
and has SHT_PROGBITS type.
Patch by Konstantin Baladurin <k.baladurin@partner.samsung.com>.
Differential Revision: https://reviews.llvm.org/D44998
llvm-svn: 331173
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
Summary:
Besides being superfluous, this double merging was actually wrong and
causing some sections to be added twice. The reason for that was that
the code assumes section IDs are unique in the section list, but this is
only true if all sections in the list come from the same object file.
Reviewers: fjricci, jankratochvil
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D44157
llvm-svn: 327123
This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
ObjectFileELF::GetModuleSpecifications contained a lot of tip-toing code
which was trying to avoid loading the full object file into memory. It
did this by trying to load data only up to the offset if was accessing.
However, in practice this was useless, as 99% of object files we
encounter have section headers at the end, so we would load the whole
file as soon as we start parsing the section headers.
In fact, this would break as soon as we encounter a file which does
*not* have section headers at the end (yaml2obj produces these), as the
access to .strtab (which we need to get the section names) was not
guarded by this offset check.
As this strategy was completely ineffective anyway, I do not attempt to
proliferate it further by guarding the .strtab accesses. Instead I just
lead the full file as soon as we are reasonably sure that we are indeed
processing an elf file.
If we really care about the load size here, we would need to reimplement
this to just load the bits of the object file we need, instead of
loading everything from the start of the object file to the given
offset. However, given that the OS will do this for us for free when
using mmap, I think think this is really necessary.
For testing this I check a (tiny) SO file instead of yaml2obj-ing it
because the fact that they come out first is an implementation detail of
yaml2obj that can change in the future.
llvm-svn: 324254
Summary:
The difference between this and regular LLDB_LOG is that this one clears
the error object unconditionally. This was inspired by the
ObjectFileELF bug (r322664), where the error object was being cleared
only if logging was enabled.
Reviewers: davide, zturner, jingham, clayborg
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D42182
llvm-svn: 323753
In D40616 I (mistakenly) assumed that logging an llvm::Error would clear
it. This of course is only true if logging is actually enabled.
This fixes the assertion by manually clearing the error, but it raises
the point of whether we need a special error-clearing logging primitive.
llvm-svn: 322664
Summary:
We sometimes need to write to the object file we've mapped into memory,
generally to apply relocations to debug info sections. We've had that
ability before, but with the introduction of DataBufferLLVM, we have
lost it, as the underlying llvm class (MemoryBuffer) only supports
read-only mappings.
This switches DataBufferLLVM to use the new llvm::WritableMemoryBuffer
class as a back-end, as this one guarantees to return a writable buffer.
This removes the need for the "Private" flag to the DataBufferLLVM
creation functions, as it was really used to mean "writable". The LLVM
function also does not have the NullTerminate flag, so I've modified our
clients to not require this feature and removed that flag as well.
Reviewers: zturner, clayborg, jingham
Subscribers: emaste, aprantl, arichardson, krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D40079
llvm-svn: 321255
Summary:
We use the llvm decompressor to decompress SHF_COMPRESSED sections. This enables
us to read data from debug info sections, which are sometimes compressed,
particuarly in the split-dwarf case. This functionality is only available if
llvm is compiled with zlib support.
Reviewers: clayborg, zturner
Subscribers: emaste, mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D40616
llvm-svn: 320813
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
FreeBSD kernel modules are actually relocatable (.o) ELF files and this
previously caused some issues for LLDB. This change addresses these when
using lldb to symbolicate FreeBSD kernel backtraces.
The major problems:
- Relocations were not being applied to the DWARF debug info despite
there being code to do this. Several issues prevented it from working:
- Relocations are computed at the same time as the symbol table, but
in the case of split debug files, symbol table parsing always
redirects to the primary object file, meaning that relocations would
never be applied in the debug file.
- There's actually no guarantee that the symbol table has been parsed
yet when trying to parse debug information.
- When actually applying relocations, it will segfault because the
object files are not mapped with MAP_PRIVATE and PROT_WRITE.
- LLDB returned invalid results when performing ordinary address-to-
symbol resolution. It turned out that the addresses specified in the
section headers were all 0, so LLDB believed all the sections had
overlapping "file addresses" and would sometimes return a symbol from
the wrong section.
Patch by Brian Koropoff
Differential Revision: https://reviews.llvm.org/D38142
llvm-svn: 314672
Summary:
The DWP (DWARF package) format is used to pack multiple dwo files
generated by split-dwarf into a single ELF file to make distributing
them easier. It is part of the DWARFv5 spec and can be generated by
dwp or llvm-dwp from a set of dwo files.
Caviats:
* Only the new version of the dwp format is supported (v2 in GNU
numbering schema and v5 in the DWARF spec). The old version (v1) is
already deprecated but binutils 2.24 still generates that one.
* Combining DWP files with module debugging is not yet supported.
Subscribers: emaste, mgorny, aprantl
Differential Revision: https://reviews.llvm.org/D36062
llvm-svn: 311775
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary: Reported by coverity, I don't know how to provide a test.
Reviewers: zturner
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D34550
llvm-svn: 306134
Summary:
This is basically a revert of D16107 and parts of D10800, which were
trying to get vdso loading working. They did this by implementing a
generic load-an-elf-file from memory approach, which is not correct,
since we cannot assume that an elf file is loaded in memory in full (it
usually isn't, as there's no need to load section headers for example).
This meant that we would read garbage instead of section sizes, and if
that garbage happened to be a large number, we would crash while trying
to allocate a buffer to accomodate the hypothetical section.
Instead of this, I add a bit of custom code to load the vdso to
DynamicLoaderPOSIXDYLD (which already needed to handle the vdso
specially). I determine the size of the memory to read using
Process::GetMemoryRegionInfo, which is information coming from the OS,
and cannot be forged by a malicious/misbehaving application.
Reviewers: eugene, clayborg
Subscribers: lldb-commits, ravitheja, tberghammer, emaste
Differential Revision: https://reviews.llvm.org/D34352
llvm-svn: 305780
The Timer destructor would grab a global mutex in order to update
execution time. Add a class to define a category once, statically; the
class adds itself to an atomic singly linked list, and thus subsequent
updates only need to use an atomic rather than grab a lock and perform a
hashtable lookup.
Differential Revision: https://reviews.llvm.org/D32823
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 303058
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
If we have symbol information in a separate file, we need to be very
careful about presenting a unified section view of module to the rest of
the debugger. ObjectFileELF had code to handle that, but it was being
overly cautious -- the section->GetFileSize()!=0 meant that the
unification would fail for sections which do not occupy any space in the
object file (e.g., .bss). In my case, that manifested itself as not
being able to display the values of .bss variables properly as the
section associated with the variable did not have it's load address set
(because it was not present in the unified section list).
I test this by making sure the unified section list and the variables
refer to the same section.
Reviewers: eugene, zturner
Subscribers: tberghammer, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D32434
llvm-svn: 301917
Summary:
UniqueCStringMap "sorts" the entries for fast lookup, but really it only cares about uniqueness. ConstString can be compared by pointer alone, rather than with strcmp, resulting in much faster comparisons. Change the interface to take ConstString instead, and propagate use of the type to the callers where appropriate.
Reviewers: #lldb, clayborg
Reviewed By: clayborg
Subscribers: labath, jasonmolenda, lldb-commits
Differential Revision: https://reviews.llvm.org/D32316
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 301908
Summary:
Add basic OpenBSD support. This is enough to be able to analyze core dumps for OpenBSD/amd64, OpenBSD/arm, OpenBSD/arm64 and OpenBSD/i386.
Note that part of the changes to source/Plugins/ObjectFile/ELF/ObjectFileELF.cpp fix a bug that probably affects other platforms as well. The GetProgramHeaderByIndex() interface use 1-based indices, but in some case when looping over the headers the, the loop starts at 0 and misses the last header. This caused problems on OpenBSD since OpenBSD core dumps have the PT_NOTE segment as the last program header.
Reviewers: joerg, labath, krytarowski
Reviewed By: krytarowski
Subscribers: aemerson, emaste, rengolin, srhines, krytarowski, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31131
llvm-svn: 298810
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
After a series of patches on the LLVM side to get the mmaping
code up to compatibility with LLDB's needs, it is now ready
to go, which means LLDB's custom mmapping code is redundant.
So this patch deletes it all and uses LLVM's code instead.
In the future, we could take this one step further and delete
even the lldb DataBuffer base class and rely entirely on
LLVM's facilities, but this is a job for another day.
Differential Revision: https://reviews.llvm.org/D30054
llvm-svn: 296159
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
Problem:
There are three filelds in the ELF header - e_phnum, e_shnum, and e_shstrndx -
that could be bigger than 64K and therefore do not fit in 16 bits reserved for
them in the header. If this happens, pretty often there is a special section at
index 0 which contains their real values for these fields in the section header
in the fields sh_info, sh_size, and sh_link respectively.
Fix:
- Rename original fields in the header declaration. We want to have them around
just in case.
- Reintroduce these fields as 32-bit members at the end of the header. By default
they are initialized from the header in Parse() method.
- In Parse(), detect the situation when the header might have been extended into
section info #0 and try to read it from the same data source.
- ObjectFileELF::GetModuleSpecifications accesses some of these fields but the
original parse uses too small data source. Re-parse the header if necessary
using bigger data source.
- ProcessElfCore::CreateInstance uses header with potentially sentinel values,
but it does not access these fields, so a comment here is enough.
Reviewers: labath
Reviewed By: labath
Subscribers: davidb, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29095
Author: Eugene Birukov <eugenebi@hotmail.com>
llvm-svn: 293714
This diff
1. Adds a comment to ObjectFileELF.cpp about the current
approach to determining the OS.
2. Replaces the check in SymbolFileDWARF.cpp with a more robust one.
Test plan:
Built (on Linux) a test binary linked to a c++ shared library
which contains just an implementation of a function TestFunction,
the library (the binary itself) doesn't contain ELF notes
and EI_OSABI is set to System V.
Checked in lldb that now "p TestFunction()" works fine
(and doesn't work without this patch).
Differential revision: https://reviews.llvm.org/D27380
llvm-svn: 288687
Summary:
ObjectFileELF::RefineModuleDetailsFromNote() identifies Linux core dumps by searching for
library paths starting with /lib/x86_64-linux-gnu or /lib/i386-linux-gnu. This change widens the
test to allow for linux installations which have addition directories in the path.
Reviewers: ted, hhellyer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25179
llvm-svn: 284114
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Summary:
There were places in the code, assuming(hardcoding) offsets
and types that were only valid for the x86_64 elf core file format.
The NT_PRSTATUS and NT_PRPSINFO structures are with the 64 bit layout.
I have reused them and parse i386 files manually, and fill them in the
same struct.
Also added some error handling during parsing that checks if the
available bytes in the buffer are enough to fill the structures.
The i386 core file test case now passes.
For reference on the structures layout, I generally used the
source of binutils (bfd, readelf)
Bug: https://llvm.org/bugs/show_bug.cgi?id=26947
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22917
llvm-svn: 277140
These are artifical symbols inside android oat files without any value
for the user while causing a significant perfoamce hit inside the
unwinder. We were already ignoring it inside system@framework@boot.oat
bot they have to be ignored in every oat file. Considering that oat
files are only used on android this have no effect on any other
platfrom.
llvm-svn: 274500
In order to make this happen, I have added permissions to sections so that we can know what the permissions are for a given section, and modified both core file plug-ins to override Process::GetMemoryRegionInfo() and answer things correctly.
llvm-svn: 272276
Patch by Nitesh Jain.
Summary: These patch fix thread step-out for hard and soft float.
Reviewers: jaydeep, bhushan, clayborg
Differential Revision: http://reviews.llvm.org/D20416
llvm-svn: 270564
The CL causes a build breakage on platforms where sizeof(double) == sizeof(long double)
and it incorrectly assumes that sizeof(double) and sizeof(long double) is the same
on the host and the target.
llvm-svn: 270214
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Fangrui Song