Add a field to the qMemoryRegionInfo packet where the remote stub
can describe the type of memory -- heap, stack. Keep track of
memory regions that are stack memory in lldb. Add a new "--style
stack" to process save-core to request that only stack memory be
included in the corefile.
Differential Revision: https://reviews.llvm.org/D107625
Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
This adds memory tag writing to Process and the
GDB remote code. Supporting work for the
"memory tag write" command. (to follow)
Process WriteMemoryTags is similair to ReadMemoryTags.
It will pack the tags then call DoWriteMemoryTags.
That function will send the QMemTags packet to the gdb-remote.
The QMemTags packet follows the GDB specification in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
Note that lldb-server will be treating partial writes as
complete failures. So lldb doesn't need to handle the partial
write case in any special way.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105181
Change SetCurrentThread*() logic not to include the zero padding
in PID/TID that was a side effect of 02ef0f5ab4. This should fix
problems caused by sending 64-bit integers to 32-bit servers. Reported
by Ted Woodward.
Differential Revision: https://reviews.llvm.org/D106832
This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
Extend the SetCurrentThread() method to support specifying an alternate
PID to switch to. This makes it possible to issue requests to forked
processes.
Differential Revision: https://reviews.llvm.org/D100262
Refactor SetCurrentThread() and SetCurrentThreadForRun() to reduce code
duplication and simplify it. Both methods now call common
SendSetCurrentThreadPacket() that implements the common protocol
exchange part (the only variable is sending `Hg` vs `Hc`) and returns
the selected TID. The logic is rewritten to use a StreamString
instead of snprintf().
A side effect of the change is that thread-id sent is now zero-padded.
However, this should not have practical impact on the server as both
forms are equivalent.
Differential Revision: https://reviews.llvm.org/D100459
These were disabled in 473a3a773e
because they failed on 32 bit platforms. (Arm for sure but I assume
any 32 bit)
This was due to the printf formatter used. These assumed
that types like uint64_t/size_t would be certain size/type and
that changes on 32 bit.
Instead use "z" to print the size_t and PRI<...> formatters
for the addr_t (always uint64_t) and the int32_t.
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
Read the number of addressable bits from the qHostInfo packet and use it
to set the code and data address mask in the process. The data
(addressing_bits) is already present in the packet.
Differential revision: https://reviews.llvm.org/D100520
Refactor the qSupported handler to split the reply into an array,
and identify features within the array rather than searching the string
for partial matches. While at it, use StringRef.split() to process
the compression list instead of reinventing the wheel.
Switch the arguments to MaybeEnableCompression() to use an ArrayRef
of StringRefs to simplify parameter passing from GetRemoteQSupported().
Differential Revision: https://reviews.llvm.org/D100146
This reverts commit 3842de49f6.
It fails to build, with errors such as:
GDBRemoteCommunicationClient.cpp:1005:20:
error: no viable overloaded '='
avail_name = compression;
Refactor the qSupported handler to split the reply into an array,
and identify features within the array rather than searching the string
for partial matches. While at it, use StringRef.split() to process
the compression list instead of reinventing the wheel.
Switch the arguments to MaybeEnableCompression() to use an ArrayRef
of StringRefs to simplify parameter passing from GetRemoteQSupported().
Differential Revision: https://reviews.llvm.org/D100146
Add a minimal support for the multiprocess extension in gdb-remote
client. It accepts PIDs as part of thread-ids, and rejects PIDs that
do not match the current inferior.
Differential Revision: https://reviews.llvm.org/D99603
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
GDBRemoteCommunicationClient::SendGetSupportedTraceType is checking whether the
response is `!response.IsNormalResponse()` and infers from that that it is an error response.
However, it could be either "unsupported" or "error". If we get an unsupported response,
the code then tries to generate an llvm::Expected from the non-error response which then asserts.
Debugserver doesn't implement `jLLDBTraceSupportedType`, so we get an unsupported response
whenever this function is called on macOS.
This fixes the TestAproposWithProcess on macOS (where the `apropos` command will query
the CommandObjectTraceStart which then sends the trace type query package).
Reviewed By: wallace, shafik
Differential Revision: https://reviews.llvm.org/D91801
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
This patch adds the ability to use a custom interpreter with the
`platform shell` command. If the user set the `-s|--shell` option
with the path to a binary, lldb passes it down to the platform's
`RunShellProcess` method and set it as the shell to use in
`ProcessLaunchInfo to run commands.
Note that not all the Platforms support running shell commands with
custom interpreters (i.e. RemoteGDBServer is only expected to use the
default shell).
This patch also makes some refactoring and cleanups, like swapping
CString for StringRef when possible and updating `SBPlatformShellCommand`
with new methods and a new constructor.
rdar://67759256
Differential Revision: https://reviews.llvm.org/D86667
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
1. Extended the gdb-remote communication related classes with disk file/directory
completion functions;
2. Added two common completion functions RemoteDiskFiles and
RemoteDiskDirectories based on the functions above;
3. Added completion for these commands:
A. platform get-file <remote-file> <local-file>;
B. platform put-file <local-file> <remote-file>;
C. platform get-size <remote-file>;
D. platform settings -w <remote-dir>;
E. platform open file <remote-file>.
4. Added related tests for client and server;
5. Updated docs/lldb-platform-packets.txt.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85284
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Summary:
LLVM is using its own isPrint/isSpace implementation that doesn't change depending on the current locale. LLDB should do the same
to prevent that internal logic changes depending on the set locale.
Reviewers: JDevlieghere, labath, mib, totally_not_teemperor
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D82175
SBTarget::AddModule currently handles the UUID parameter in a very
weird way: UUIDs with more than 16 bytes are trimmed to 16 bytes. On
the other hand, shorter-than-16-bytes UUIDs are completely ignored. In
this patch, we change the parsing code to handle UUIDs of arbitrary
size.
To support arbitrary size UUIDs in SBTarget::AddModule, this patch
changes UUID::SetFromStringRef to parse UUIDs of arbitrary length. We
subtly change the semantics of SetFromStringRef - SetFromStringRef now
only succeeds if the entire input is consumed to prevent some
prefix-parsing confusion. This is up for discussion, but I believe
this is more consistent - we always return false for invalid UUIDs
rather than sometimes truncating to a valid prefix. Also, all the
call-sites except the API and interpreter seem to expect to consume
the entire input.
This also adds tests for adding existing modules 4-, 16-, and 20-byte
build-ids. Finally, we took the liberty of testing the minidump
scenario we care about - removing placeholder module from minidump and
replacing it with the real module.
Reviewed By: labath, friss
Differential Revision: https://reviews.llvm.org/D80755
Summary:
Currently we only log in debug builds but I don't see why we would do this as this is neither
expensive and seems useful.
I looked into the git history of this code and it seems originally there was also an assert here
and the logging here was the #else branch branch for non-Debug builds.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76698
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
and follow-ups:
a2ca1c2d "build: disable zlib by default on Windows"
2181bf40 "[CMake] Link against ZLIB::ZLIB"
1079c68a "Attempt to fix ZLIB CMake logic on Windows"
This changed the output of llvm-config --system-libs, and more
importantly it broke stand-alone builds. Instead of piling on more fix
attempts, let's revert this to reduce the risk of more breakages.
Jason Molenda