ptsname is not thread-safe. ptsname_r is available on most (but not all)
systems -- use it preferentially.
In the patch I also improve the thread-safety of the ptsname fallback
path by wrapping it in a mutex. This should guarantee the safety of a
typical ptsname implementation using a single static buffer, as long as
all callers go through this function.
I also remove the error arguments, as the only way this function can
fail is if the "primary" fd is not valid. This is a programmer error as
this requirement is documented, and all callers ensure that is the case.
Differential Revision: https://reviews.llvm.org/D88728
This reverts commit c65627a1fe.
The test immediately after the new invalid symbol test was
failing on Windows. This was because when we called
VirtualQueryEx to get the region info for 0x0,
even if it succeeded we would call GetLastError.
Which must have picked up the last error that was set while
trying to lookup "not_an_address". Which happened to be 2.
("The system cannot find the file specified.")
To fix this only call GetLastError when we know VirtualQueryEx
has failed. (when it returns 0, which we were also checking for anyway)
Also convert memory region to an early return style
to make the logic clearer.
Reviewed By: labath, stella.stamenova
Differential Revision: https://reviews.llvm.org/D88229
Multiple fixes related to bugs discovered while debugging a crash
when reading all registers on i386.
The underlying problem was that GetSetForNativeRegNum() did not account
for MPX registers on i386, and since it only compared against upper
bounds of each known register set, the MPX registers were classified
into the wrong set and therefore considered supported. However, they
were not expected in RegNumX86ToX86_64() and caused the assertion
to fail.
This includes:
- adding (unused) i386 → x86_64 translations for MPX registers
- fixing GetSetForNativeRegNum() to check both lower and upper bound
for register sets, to avoid wrongly classifying unhandled register
sets
- adding missing range check for MPX registers on i386
- renaming k_last_mpxr to k_last_mpxr_i386 for consistency
- replacing return-assertions with llvm_unreachable() and adding more
checks for unexpected parameters
Differential Revision: https://reviews.llvm.org/D88682
Fix reading FIP/FDP registers to correctly return segment and offset
parts. On amd64, this roughly matches the Linux behavior of splitting
the 64-bit FIP/FDP into two halves, and putting the higher 32 bits
into f*seg and lower into f*off. Well, actually we use only 16 bits
of higher half but the CPUs do not seem to handle more than that anyway.
Differential Revision: https://reviews.llvm.org/D88681
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Add the flag in ProcessMachCore::DoLoadCore that stops additional
searches for the binaries when we have an LC_NOTE identifying the
firmware/standalone binary as the correct one & we have loaded it
successfully.
When a Mach-O corefile has an LC_NOTE "main bin spec" for a
standalone binary / firmware, with only a UUID and no load
address, try to locate the binary and dSYM by UUID and if
found, load it at offset 0 for the user.
Add a test case that tests a firmware/standalone corefile
with both the "kern ver str" and "main bin spec" LC_NOTEs.
<rdar://problem/68193804>
Differential Revision: https://reviews.llvm.org/D88282
This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D86962
This patch adds the ability to use a custom interpreter with the
`platform shell` command. If the user set the `-s|--shell` option
with the path to a binary, lldb passes it down to the platform's
`RunShellProcess` method and set it as the shell to use in
`ProcessLaunchInfo to run commands.
Note that not all the Platforms support running shell commands with
custom interpreters (i.e. RemoteGDBServer is only expected to use the
default shell).
This patch also makes some refactoring and cleanups, like swapping
CString for StringRef when possible and updating `SBPlatformShellCommand`
with new methods and a new constructor.
rdar://67759256
Differential Revision: https://reviews.llvm.org/D86667
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Breakpad creates minidump files that can a module loaded multiple times. We found that when a process mmap's the object file for a library, this can confuse breakpad into creating multiple modules in the module list. This patch fixes the GetFilteredModules() to check the linux maps for permissions and use the one that has execute permissions. Typically when people mmap a file into memory they don't map it as executable. This helps people to correctly load minidump files for post mortem analysis.
Differential Revision: https://reviews.llvm.org/D86375
There was typo left from changes in CalculateSVEOffset where we moved
FPSR/FPCR offset calculation into WriteRegister and ReadRegister.
Differential Revision: https://reviews.llvm.org/D79699
Breakpad will always have a UUID for binaries when it creates minidump files. If an ELF files has a GNU build ID, it will use that. If it doesn't, it will create one by hashing up to the first 4096 bytes of the .text section. LLDB was not able to load these binaries even when we had the right binary because the UUID didn't match. LLDB will use the GNU build ID first as the main UUID for a binary and fallback onto a 8 byte CRC if a binary doesn't have one. With this fix, we will check for the Breakpad hash or the Facebook hash (a modified version of the breakpad hash that collides a bit less) and accept binaries when these hashes match.
Differential Revision: https://reviews.llvm.org/D86261
1. Extended the gdb-remote communication related classes with disk file/directory
completion functions;
2. Added two common completion functions RemoteDiskFiles and
RemoteDiskDirectories based on the functions above;
3. Added completion for these commands:
A. platform get-file <remote-file> <local-file>;
B. platform put-file <local-file> <remote-file>;
C. platform get-size <remote-file>;
D. platform settings -w <remote-dir>;
E. platform open file <remote-file>.
4. Added related tests for client and server;
5. Updated docs/lldb-platform-packets.txt.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85284
This patch adds NativeRegisterContext_arm64 ptrace routines to access
AArch64 SVE register set. This patch also adds a test-case to test
AArch64 SVE register access and dynamic size configuration capability.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79699
In our discussion D79699 SVE ptrace register access support we decide to
invalidate register context cached data on every stop instead of doing
at before Step/Resume.
InvalidateAllRegisters was added to facilitate flushing of SVE register
context configuration and cached register values. It now makes more
sense to move invalidation after every stop where we initiate SVE
configuration update if needed by calling ConfigureRegisterContext.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84501
This patch updates LLDB's in house version of SVE ptrace/sig macros by
converting them into constants and inlines. They are housed under sve
namespace and are used by process elf-core for reading SVE register data.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85641
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
The lldb test-suite on Windows reports a 'CLEANUP ERROR' when attempting to kill
an exited/detached process. This change makes ProcessWindows consistent with
the other processes which only log the error. After this change a number of
'CLEANUP ERROR' messages are now removed.
Differential Revision: https://reviews.llvm.org/D84957
Let's just return a std::string to make this safe. formatv seemed overkill for formatting
the return values as they all just append an integer value to a constant string.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84505
Most process plugins (if not all) don't set hardware index for breakpoints. They even
are not able to determine this index.
This patch makes StoppointLocation::IsHardware pure virtual and lets BreakpointSite
override it using more accurate BreakpointSite::Type.
It also adds assertions to be sure that a breakpoint site is hardware when this is required.
Differential Revision: https://reviews.llvm.org/D84257
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This patch fixes build on lldb-x64-windows-ninja. The error is caused by
use of two leading underscores.
According to MSVC documentation:
In Microsoft C++, identifiers with two leading underscores are reserved
for compiler implementations.
https://docs.microsoft.com/en-us/cpp/cpp/keywords-cpp?view=vs-2019
LinuxPTraceDefines_arm64sve.h defines essential macros for manipulating
AArch64 SVE core dump registers. Add guard for aarch64/Linux hosts where
newer versions of ptrace.h or sigcontext.h might already define SVE macros.
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This patch adds support for AArch64 SVE register infos description and
core file register access.
AArch64 SVE is a an optional extension of Arm v8.3-a architecture. It
has introduced 32 new vector registers Z, 16 predicate P registers and FFR
predicate register. These registers have fixed names but can dynamically
be configured to different size based on underlying OS configuration.
This patch adds register info struct that describes SVE register infos and
also provides RegisterContextPOSIXCore_arm64 routines to access SVE registers.
This patch also introduces a mechanism to configure SVE register sizes and
offsets at startup before exchanging register information across gdb-remote.
TestLinuxCore.py has been updated to include testing of SVE core files.
Reviewers: labath, clayborg, jankratochvil, jasonmolenda, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77047
Summary:
SVE elf note data requires SVE PT macros for reading writing data. Same macros are used by Linux ptrace SVE register access.
This patch makes necessary changes to lldb/source/Plugins/Process/Linux/LinuxPTraceDefines_arm64sve.h in order to make them sysroot independent.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, lldb-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This patch removes dependence of RegisterContextPOSIX_arm64 on register number enums defined in lldb-arm64-register-enums.h.
RegisterContextPOSIX_arm64 makes use of helper functions to access register numbers defined in RegisterInfos_arm64.h via RegisterInfosPOSIX_arm64.
Reviewers: labath
Reviewed By: labath
Subscribers: emaste, kristof.beyls, arphaman, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D83753
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Summary:
This fixes an override issue by marking a function as const so that the
signature maps to the signature of the function in the base class.
This is the original error:
In file included from /root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.cpp:11:
/root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.h:79:10: error: 'size_t lldb_private::process_linux::NativeRegisterContextLinux_s390x::GetGPRSize()' marked 'override', but does not override
79 | size_t GetGPRSize() override { return sizeof(m_regs); }
| ^~~~~~~~~~
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83580
NativeProcessELF::GetELFImageInfoAddress<...>() is declared in NativeProcessELF.h, but only defined in NativeProcessELF.cpp. Via some optimized builds (e.g. thinlto), this instantiation may be removed when it is used in a different TU (NativeProcessELFTest.cpp).
Summary:
This patch adds some cosmetic changes to LLDB AArch64 register infos macros in order to use them in SVE register infos struct in follow up patches.
This patch initially added invalidate lists to register infos struct but that is no longer needed and problem disappeared after updating qemu testing environment.
old headline comments for reference:
AArch64 reigster X and V registers are primary GPR and vector registers respectively. If these registers are modified their corresponding children w regs or s/d regs should be invalidated. Specially when a register write fails it is important that failure gets reflected to all the registers which draw their value from a particular value register.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77045
Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D80105
Translated processes talk with a different debugserver, shipped with
macOS 11. This patch detects whether a process is translated and
attaches to the correct debugserver implementation.
It's the first patch of a series. Tested on the lldb test suite.
Differential Revision: https://reviews.llvm.org/D82491
Summary:
LLVM is using its own isPrint/isSpace implementation that doesn't change depending on the current locale. LLDB should do the same
to prevent that internal logic changes depending on the set locale.
Reviewers: JDevlieghere, labath, mib, totally_not_teemperor
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D82175
Summary:
This patch aims to remove multiple copies of GetByteOrder() and ConvertRegisterKindToRegisterNumber used in various versions of RegisterContextPOSIX_*.
Both register implementations are move to RegisterContext class which is parent of RegisterContextPOSIX_* classes.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: wuzish, nemanjai, kristof.beyls, kbarton, atanasyan, lldb-commits
Differential Revision: https://reviews.llvm.org/D80104
SBTarget::AddModule currently handles the UUID parameter in a very
weird way: UUIDs with more than 16 bytes are trimmed to 16 bytes. On
the other hand, shorter-than-16-bytes UUIDs are completely ignored. In
this patch, we change the parsing code to handle UUIDs of arbitrary
size.
To support arbitrary size UUIDs in SBTarget::AddModule, this patch
changes UUID::SetFromStringRef to parse UUIDs of arbitrary length. We
subtly change the semantics of SetFromStringRef - SetFromStringRef now
only succeeds if the entire input is consumed to prevent some
prefix-parsing confusion. This is up for discussion, but I believe
this is more consistent - we always return false for invalid UUIDs
rather than sometimes truncating to a valid prefix. Also, all the
call-sites except the API and interpreter seem to expect to consume
the entire input.
This also adds tests for adding existing modules 4-, 16-, and 20-byte
build-ids. Finally, we took the liberty of testing the minidump
scenario we care about - removing placeholder module from minidump and
replacing it with the real module.
Reviewed By: labath, friss
Differential Revision: https://reviews.llvm.org/D80755
Summary:
This changes allows to disable or use customized libxml2 for lldb.
1. Removes redundant include_directories. The one in LLDBConfig.cmake should be enough.
2. Link to ${LIBXML2_LIBRARIES} if xml2 is enabled.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80257
This setting was added last year, defaulting to false. There have been
no bug reports about the svr4 code path since then, and the using this
packet is definitely faster than walking the module list from lldb.
Set the default value of the setting to true, as that is a better
default. Users can still change it back if encountering problems, or we
can revert the change as well, in case of bigger issues.
I also add a note to the setting description that it is only effective
if lldb is built with xml support.
All entry points into ProcessGDBRemote that connect to the debug server
should connect to the replay server instead during reproducer replay.
This patch adds the necessary logic for ConnectRemote, which is
accessible from the SB API. This fixes active replay for
TestRecognizeBreakpoint.py as described in D78588.
Summary:
This patch adds support to access AArch64 FP SIMD core dump registers and adds a test case to verify registers.
This patches fixes a bug where doing "register read --all" causes lldb to crash.
Reviewers: labath
Reviewed By: labath
Subscribers: kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77793
Summary: This patch increases maximum register size to 256 bytes to accommodate AArch64 SVE registers maximum possible size of 256 bytes.
Reviewers: labath, jankratochvil, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77044
this is dead and non-functional code that hasn't been touched (modulo
refactors) since it was checked in (as an "NFC, with no review and
tests) in 2016.
Anyone interested in adding darwin support to lldb-server can look this
up in git history.
This patch adds parts of the stack that should be useful for unwinding
to the jThreadsInfo reply from lldb-server. We return the top of the
stack (12 words), and we also try to walk the frame pointer linked list
and return the memory containing frame pointer and return address pairs.
The idea is to cover the cases with and without frame pointer omission.
Differential Revision: https://reviews.llvm.org/D74398
Summary:
Currently we only log in debug builds but I don't see why we would do this as this is neither
expensive and seems useful.
I looked into the git history of this code and it seems originally there was also an assert here
and the logging here was the #else branch branch for non-Debug builds.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76698
Summary:
The memory history plugin for Asan creates a HistoryThread with the
recorded PC values provided by the Asan runtime. In other cases,
thoses PCs are gathered by LLDB directly.
The PCs returned by the Asan runtime are the PCs of the calls in the
backtrace, not the return addresses you would normally get when
unwinding the stack (look for a call to GetPreviousIntructionPc in
AsanGetStack).
When the above addresses are passed to the unwinder, it will subtract
1 from each address of the non zero frames because it treats them as
return addresses. This can lead to the final report referencing the
wrong line.
This patch fixes this issue by threading a flag through HistoryThread
and HistoryUnwinder that tells them to treat every frame like the
first one. The Asan MemoryHistory plugin can then use this flag.
This fixes running TestMemoryHistory on arm64 devices, although it's
hard to guarantee that the test will continue to exhibit the boundary
condition that triggers this bug.
Reviewers: jasonmolenda, kubamracek
Subscribers: kristof.beyls, danielkiss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76341
The GDB replay server sanity-checks that every packet it receives
matches what it expects from the serialized packet log. This mechanism
tripped for TestReproducerAttach.py on Linux, because one of the packets
(jModulesInfo) uses run-length encoding. The replay server was comparing
the expanded incoming packet with the unexpanded packet in the log. As a
result, it claimed to have received an unexpected packet, which caused
the test to fail.
This patch addresses that issue by expanding the run-length encoding
before comparing the packets.
Differential revision: https://reviews.llvm.org/D76163
Summary:
This is the only real unwinder, and things have been this way for quite
a long time. At this point, the class has accumulated so many features
it is unlikely that anyone will want to reimplement the whole thing.
The class is also fairly closely coupled (through UnwindPlans and
FuncUnwinders) with a lot of other lldb components that it is hard to
imagine a different unwinder implementation being substantially
different without reimplementing all of those.
The existing unwinding functionality is nonetheless fairly complex and
there is space for adding more structure to it, but I believe a more
worthwhile effort would be to take the existing UnwindLLDB class and try
to break it down and introduce extension/customization points, instead
of writing a brand new Unwind implementation.
Reviewers: jasonmolenda, JDevlieghere, xiaobai
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75848
Summary:
Otherwise this code won't run on the Release+Asserts builds we have on the CI.
Fixes rdar://problem/59867885 (partly)
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75493
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Summary:
It isn't used anywhere (except on imaginary triples like
sparc-apple-ios) and it also violates plugin separation.
This patch deletes it and declares UnwindLLDB to be _the_ lldb unwinder.
Reviewers: jasonmolenda, JDevlieghere, xiaobai
Subscribers: jyknight, mgorny, krytarowski, fedor.sergeev, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75680
and follow-ups:
a2ca1c2d "build: disable zlib by default on Windows"
2181bf40 "[CMake] Link against ZLIB::ZLIB"
1079c68a "Attempt to fix ZLIB CMake logic on Windows"
This changed the output of llvm-config --system-libs, and more
importantly it broke stand-alone builds. Instead of piling on more fix
attempts, let's revert this to reduce the risk of more breakages.
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
Updated the patch to only fetch $pc on a Return Address-using
target only if we're in a trap frame *and* if there is a saved
location for $pc in the trap frame's unwind rules. If not,
we fall back to fetching the Return Address register (eg $lr).
Original commit msg:
Unwind past an interrupt handler correctly on arm or at pc==0
Fix RegisterContextLLDB::InitializeNonZerothFrame so that it
will fetch a FullUnwindPlan instead of falling back to the
architectural default unwind plan -- GetFullUnwindPlan knows
how to spot a jmp 0x0 that results in a fault, which may be
the case when we see a trap handler on the stack.
Fix RegisterContextLLDB::SavedLocationForRegister so that when
the pc value is requested from a trap handler frame, where we
have a complete register context available to us, don't provide
the Return Address register (lr) instead of the pc. We have
an actual pc value here, and it's pointing to the instruction
that faulted.
Differential revision: https://reviews.llvm.org/D75007
<rdar://problem/59416588>
The aarcht64-ubuntu bot is showing a test failure in TestHandleAbort.py
with this patch. Adding some logging to that file, it looks like
the saved register context above the trap handler does not have
save state for $pc, but it does have it for $lr on that platform.
I need to fall back to looking for $lr if the $pc cannot be retrieved.
I'll update the patch and re-commit once that's fixed.
This reverts commit edc4f4c9c9.
Fix RegisterContextLLDB::InitializeNonZerothFrame so that it
will fetch a FullUnwindPlan instead of falling back to the
architectural default unwind plan -- GetFullUnwindPlan knows
how to spot a jmp 0x0 that results in a fault, which may be
the case when we see a trap handler on the stack.
Fix RegisterContextLLDB::SavedLocationForRegister so that when
the pc value is requested from a trap handler frame, where we
have a complete register context available to us, don't provide
the Return Address register (lr) instead of the pc. We have
an actual pc value here, and it's pointing to the instruction
that faulted.
Differential revision: https://reviews.llvm.org/D75007
<rdar://problem/59416588>
Summary:
Requesting registers one by one takes a while in our project.
We want to get rid of it by using target.xml.
Reviewers: jarin, labath, omjavaid
Reviewed By: labath, omjavaid
Subscribers: omjavaid, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
Comparing those two `const char *` values relies on the assumption that both
strings were created by a ConstString. Let's check that assumption with an
assert as otherwise this code silently does nothing and that's not great.
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Use LLDB_PLUGIN_DEFINE_ADV to make the name of the generated initializer
match the name of the plugin. This is a step towards generating the
initializers with a def file. I'm landing this change in pieces so I can
narrow down what exactly breaks the Windows bot.
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
The previously landed patch got reverted because it was lacking:
(1) A plugin definition for the Objective-C language runtime,
(2) The dependency between the Static and WASM dynamic loader,
(3) Explicit initialization of ScriptInterpreterNone for lldb-test.
All issues have been addressed in this patch.
Differential revision: https://reviews.llvm.org/D73067
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
Differential revision: https://reviews.llvm.org/D73067
Summary:
Synthesize target.xml in lldb-server to avoid a long chain of
qRegisterInfo packets, which can be slow over low-latency links.
Reviewers: jarin, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
- reduce indentation by removing the defensive
GetID()!=INVALID_PROCESS_ID check -- this function is only called when
an attach or launch succeeds
- replace LLDB_LOGF with LLDB_LOG
StringRef will call strlen on the C string which is inefficient (as ConstString already
knows the string lenght and so does StringRef). This patch replaces all those calls
with GetStringRef() which doesn't recompute the length.
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
Implement detection of ELF binary format, and support for i386 register
context on amd64 when a 32-bit executable is being debugged. This is
roughly based on the code from Linux.
Differential Revision: https://reviews.llvm.org/D73974
Due to a c++ quirk, these are found through ADL only when a function with that
name is found through regular lookup. We have one such function in SharingPtr.h,
but I am trying to remove it.
Introduce support for i386 platform that is shared with amd64
in the same plugin. The concept is partially based on the Linux
implementation.
The plugin tries to reuse as much code as possible. As a result, i386
register enums are mapped into amd64 values and those are used in actual
code. The code for accessing FPU and debug registers is shared,
although general-purpose register layouts do not match between the two
kernel APIs and need to be #ifdef-ed.
This layout will also make it possible to add support for debugging
32-bit programs on amd64 with minimal added code.
In order for this to work, I had to add missing data for debug registers
on i386.
Differential Revision: https://reviews.llvm.org/D73802
This fixes building for mingw with BUILD_SHARED_LIBS. In static builds,
the psapi dependency gets linked in transitively from Support, but
when linking Support dynamically, it's revealed that these components
also need linking against psapi.
Differential Revision: https://reviews.llvm.org/D73839
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Recognize hardware breakpoints as breakpoints instead of just mach
exceptions. The mach exception is the same for watch and breakpoints, so
we have to try each to figure out which is which.
Differential revision: https://reviews.llvm.org/D73401
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
Normally, on linux we retrieve the process ID from the LinuxProcStatus
stream (which is just the contents of /proc/%d/status pseudo-file).
However, this stream is not strictly required (it's a breakpad
extension), and we are encountering a fair amount of minidumps which do
not have it present. It's not clear whether this is the case with all
these minidumps, but the two known situations where this stream can be
missing are:
- /proc filesystem not mounted (or something to that effect)
- process crashing after exhausting (almost) all file descriptors (so
the minidump writer may not be able to open the /proc file)
Since this is a corner case which will become less and less relevant
(crashpad-generated minidumps should not suffer from this problem), I
work around this problem by hardcoding the PID to 1 in these cases.
The same thing is done by the gdb plugin when talking to a stub which
does not report a process id (e.g. a hardware probe).
Reviewers: jingham, clayborg
Subscribers: markmentovai, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70238
qemu has a very small maximum packet size (4096) and it actually
only uses half of that buffer for some implementation reason,
so when lldb asks for the register target definitions, the x86_64
definition is larger than 4096/2 and we need to fetch it in two parts.
This patch and test is fixing a bug in
GDBRemoteCommunicationClient::ReadExtFeature when reading a target
file in multiple parts. lldb was assuming that it would always
get back the maximum packet size response (4096) instead of
using the actual size received and asking for the next group of
bytes.
We now have two tests in gdb_remote_client for unique features
of qemu - TestNestedRegDefinitions.py would test the ability
of lldb to follow multiple levels of xml includes; I opted to
create a separate TestRegDefinitionInParts.py test to test this
wrinkle in qemu's gdb remote serial protocol stub implementation.
Instead of combining both tests into a single test file.
<rdar://problem/49537922>
Summary: There are a few places in LLDB where we do a `reinterpret_cast` for conversions that we could also do with `static_cast`. This patch moves all this code to `static_cast`.
Reviewers: shafik, JDevlieghere, labath
Reviewed By: labath
Subscribers: arphaman, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72161
orig_*ax logic is Linux-specific, and was never used on NetBSD.
In fact, its support seems to be a dead code entirely.
Differential Revision: https://reviews.llvm.org/D72195
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This restores 68a235d07f,
e6c7ed6d21. The problem with the windows
bot is a need for clearing the cache.
This reverts commit 68a235d07f.
This commit broke the clang-x64-windows-msvc build bot and a follow-up
commit did not fix it. Reverting to fix the bot.
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
echo -e '#include <unistd.h>\nint main(void){\nsync();return 0;}'|./bin/clang -g -x c -;./bin/lldb -o 'file ./a.out' -o 'b main' -o r -o 'p (void)sync()'
Actual:
error: Expression can't be run, because there is no JIT compiled function
Expected:
<nothing, sync() has been executed>
This patch has been checked by:
D71707: clang-tidy: new bugprone-pointer-cast-widening
https://reviews.llvm.org/D71707
Casting from 32-bit `void *` to `uint64_t` requires an intermediate `uintptr_t` cast otherwise the pointer gets sign-extended:
echo -e '#include <stdio.h>\n#include <stdint.h>\nint main(void){void *p=(void *)0x80000000;unsigned long long ull=(unsigned long long)p;unsigned long long ull2=(unsigned long
long)(uintptr_t)p;printf("p=%p ull=0x%llx ull2=0x%llx\\n",p,ull,ull2);return 0;}'|gcc -Wall -m32 -x c -;./a.out
<stdin>: In function ‘main’:
<stdin>:3:66: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
p=0x80000000 ull=0xffffffff80000000 ull2=0x80000000
With debug output:
Actual:
IRMemoryMap::WriteMemory (0xb6ff8640, 0xffffffffb6f82158, 0x112) went to [0xb6ff8640..0xb6ff86b3)
Code can be run in the target.
Found function, has local address 0xffffffffb6f84000 and remote address 0xffffffffffffffff
Couldn't disassemble function : Couldn't find code range for function _Z12$__lldb_exprPv
Sections:
[0xb6f84000+0x3c]->0xb6ff9020 (alignment 4, section ID 0, name .text)
...
HandleCommand, command did not succeed
error: Expression can't be run, because there is no JIT compiled function
Expected:
IRMemoryMap::WriteMemory (0xb6ff8640, 0xb6faa15c, 0x128) went to [0xb6ff8640..0xb6ff86c3)
IRExecutionUnit::GetRemoteAddressForLocal() found 0xb6fac000 in [0xb6fac000..0xb6fac040], and returned 0xb6ff9020 from [0xb6ff9020..0xb6ff9060].
Code can be run in the target.
Found function, has local address 0xb6fac000 and remote address 0xb6ff9020
Function's code range is [0xb6ff9020+0x40]
...
Function data has contents:
0xb6ff9020: 10 4c 2d e9 08 b0 8d e2 08 d0 4d e2 00 40 a0 e1
...
Function disassembly:
0xb6ff9020: 0xe92d4c10 push {r4, r10, r11, lr}
Differential revision: https://reviews.llvm.org/D71498
Remove the hack that populates the cpsr register in the gpr struct by
writing past the end of the array. This was tripping up ASan.
Patch by: Reva Cuthbertson
When running the test suite with always capture on, a handful of tests
are failing because they have multiple targets and therefore multiple
GDB remote connections. The current reproducer infrastructure is capable
of dealing with that.
This patch reworks the GDB remote provider to support multiple GDB
remote connections, similar to how the reproducers support shadowing
multiple command interpreter inputs. The provider now keeps a list of
packet recorders which deal with a single GDB remote connection. During
replay we rely on the order of creation to match the number of packets
to the GDB remote connection.
Differential revision: https://reviews.llvm.org/D71105
Summary:
This patch simplifies register accesses in NativeRegisterContextLinux_arm64
and also adds some bare minimum caching to avoid multiple calls to ptrace
during a stop.
Linux ptrace returns data in the form of structures containing GPR/FPR data.
This means that one single call is enough to read all GPRs or FPRs. We do
that once per stop and keep reading from or writing to the buffer that we
have in NativeRegisterContextLinux_arm64 class. Before a resume or detach we
write all buffers back.
This is tested on aarch64 thunder x1 with Ubuntu 18.04. Also tested
regressions on x86_64.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D69371
Summary:
Previously the ABI plugin exposed some "register infos" and the
gdb-remote code used those to fill in the missing bits. Now, the
"filling in" code is in the ABI plugin itself, and the gdb-remote code
just invokes that.
The motivation for this is two-fold:
a) the "augmentation" logic is useful outside of process gdb-remote. For
instance, it would allow us to avoid repeating the register number
definitions in minidump code.
b) It gives more implementation freedom to the ABI classes. Now that
these "register infos" are essentially implementation details, classes
can use other methods to obtain dwarf/eh_frame register numbers -- for
instance they can consult llvm MC layer.
Since the augmentation code was not currently tested anywhere, I took
the opportunity to create a simple test for it.
Reviewers: jasonmolenda, clayborg, tatyana-krasnukha
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70906
InitializeContext is useful for allocating a (potentially variable
size) CONTEXT struct in an unaligned byte buffer. In this case, we
already have a fixed size CONTEXT we want to initialize, and we only
used this as a very roundabout way of zero initializing it.
Instead just memset the CONTEXT we have, and set the ContextFlags field
manually.
This matches how it is done in NativeRegisterContextWindows_*.cpp.
This also makes LLDB run successfully in Wine (for a trivial tested
case at least), as Wine hasn't implemented the InitializeContext
function.
Differential Revision: https://reviews.llvm.org/D70742
Fix handling concurrent watchpoint events so that they are reported
correctly in LLDB.
If multiple watchpoints are hit concurrently, the NetBSD kernel reports
them as series of SIGTRAPs with a thread specified, and the debugger
investigates DR6 in order to establish which watchpoint was hit. This
is normally fine.
However, LLDB disables and reenables the watchpoint on all threads after
each hit, which results in the hit status from DR6 being wiped.
As a result, it can't establish which watchpoint was hit in successive
SIGTRAP processing.
In order to workaround this problem, clear DR6 only if the breakpoint
is overwritten with a new one. More specifically, move cleaning DR6
from ClearHardwareWatchpoint() to SetHardwareWatchpointWithIndex(),
and do that only if the newly requested watchpoint is different
from the one being set previously. This ensures that the disable-enable
logic of LLDB does not clear watchpoint hit status for the remaining
threads.
This also involves refactoring of watchpoint logic. With the old logic,
clearing watchpoint involved wiping dr6 & dr7, and setting it setting
dr{0..3} & dr7. With the new logic, only enable bit is cleared
from dr7, and the remaining bits are cleared/overwritten while setting
new watchpoint.
Differential Revision: https://reviews.llvm.org/D70025
NetBSD ptrace interface does not populate watchpoints to newly-created
threads. Solve this via copying the watchpoints from the current thread
when new thread is reported via TRAP_LWP.
Add a test that verifies that when the user does not have permissions
to set watchpoints on NetBSD, the 'watchpoint set' errors out gracefully
and thread monitoring does not crash on being unable to copy watchpoints
to new threads.
Differential Revision: https://reviews.llvm.org/D70023
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
lldb would silently accept a response to the 'g' packet
(read all registers) which was too large; this handles the
case where it is too small.
Differential Revision: https://reviews.llvm.org/D70417
<rdar://problem/34916465>
Implement thread name getting sysctl() on NetBSD. Also fix
the incorrect type in pthread_setname_np() in the relevant test.
Differential Revision: https://reviews.llvm.org/D70363
until we can automatically fall back to p/P if g/G are not supported;
it looks like there is a bug in debugserver's g/G packets taht needs
to be fixed, or debugserver should stop supporting g/G until that bug
is fixed. But we need lldb to be able to fall back to p/P correctly
for that to be a viable workaround.
While investigating an issue where a different packet was sent during
replay I noticed how annoying it is that the existing assert doesn't
specify what packet is actually different. It's printed to the log, but
enabling logging has the potential to change LLDB's behavior. The same
is true when debugging LLDB while it's replaying the reproducer.
I replaced the assert with a printf of the unexpected packet followed by
a fatal_error wrapped in ifndef NDEBUG. The behavior is the same as the
previous assert, just with more/better context.
Following up on https://reviews.llvm.org/D62221, this change introduces
the settings plugin.process.gdb-remote.use-g-packet-for-reading. When
they are on, 'g' packets are used for reading registers.
Using 'g' packets can improve performance by reducing the number of
packets exchanged between client and server when a large number of
registers needs to be fetched.
Differential revision: https://reviews.llvm.org/D62931
Add info for all register sets supported in NetBSD, particularly for all
registers 'expected' by LLDB. This is necessary in order to fix
python_api/lldbutil/iter/TestRegistersIterator.py test that currently
fails due to missing names of register sets (None).
This copies fpreg descriptions from Linux, and combines Linux' AVX
and MPX registers into a single XState group, to fit NetBSD register
group design. Technically, we do not support MPX registers
at the moment but gdb-remote insists on passing their errors anyway,
and if we do not include it in any group, they end up in a separate
anonymous group that breaks the test.
While at it, swap the enums for XState and DBRegs to match register set
ordering.
This also adds a few consts to the lldb-x86-register-enums.h to provide
more consistency between user registers and debug registers.
Differential Revision: https://reviews.llvm.org/D69667
Summary:
Not all minidumps contain information about memory permissions. However,
it is still important to know which regions of memory contain
potentially executable code. This is particularly important for
unwinding on win32, as the default unwind method there relies on
scanning the stack for things which "look like" code pointers.
This patch enables ProcessMinidump to reconstruct the likely permissions
of memory regions using the sections of loaded object files. It only
does this if we don't have a better source (memory info list stream, or
linux /proc/maps) for this information, and only if the information in
the object files does not conflict with the information in the minidump.
Theoretically that last bit could be improved, since the permissions
obtained from the MemoryList streams is also only a very rough guess,
but it did not seem worthwhile to complicate the implementation because
of that because there will generally be no overlap in practice as the
MemoryList will contain the stack contents and not any module data.
The patch adds a test checking that the module section permissions are
entered into the memory region list, and also a test which demonstrate
that now the unwinder is able to correctly find return addresses even in
minidumps without memory info list streams.
There's one TODO left in this patch, which is that the "memory region"
output does not give any indication about the "don't know" values of
memory region permissions (it just prints them as if they permission bit
was set). I address this in a follow up.
Reviewers: amccarth, clayborg
Subscribers: mgrang, lldb-commits
Differential Revision: https://reviews.llvm.org/D69105
Summary:
This change increases the offset of MPX registers (by 128) so they
do not overlap with the offset associated with AVX registers. That was
causing MPX data in GDBRemoteRegisterContext::m_reg_data to get overwritten.
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68874
This can e.g. happen if the debugged executable exits before the initial
stop, e.g. if it fails to load dependent DLLs.
Add a virtual destructor to ProcessDebugger and let it clean up the
session, and make ProcessWindows::OnExitProcess call
ProcessDebugger::OnExitProcess for shared parts.
Fix suggestion by Adrian McCarthy.
Differential Revision: https://reviews.llvm.org/D69503
Contrary to WoW64 on x86_64, there's no struct similar to WOW64_CONTEXT
defined, for storing and handling the CPU state of an ARM32 process
from an ARM64 process. Thus, making an ARM64 lldb-server able to
control ARM32 processes seems infeasible at the moment.
(The normal CONTEXT struct has a different layout on each architecture.
In addition to this, a WOW64_CONTEXT struct always is defined, that
can store the CPU state of an x86_32 process, to allow handling it from
an x86_64 process. But there's no similar universally available struct
for ARM32.)
The architecture enum contains two kinds of contstants: the "official" ones
defined by Microsoft, and unofficial constants added by breakpad to cover the
architectures not described by the first ones.
Up until now, there was no big need to differentiate between the two. However,
now that Microsoft has defined
https://docs.microsoft.com/en-us/windows/win32/api/sysinfoapi/ns-sysinfoapi-system_info
a constant for ARM64, we have a name clash.
This patch renames all breakpad-defined constants with to include the prefix
"BP_". This frees up the name "ARM64", which I'll re-introduce with the new
"official" value in a follow-up patch.
Reviewers: amccarth, clayborg
Subscribers: lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D69285
The goal of this refactor is to enable ProcessMinidump to take into
account the loaded modules and their sections when computing the
permissions of various ranges of memory, as discussed in D66638.
This patch moves some of the responsibility for computing the ranges
from MinidumpParser into ProcessMinidump. MinidumpParser still does the
parsing, but ProcessMinidump becomes responsible for answering the
actual queries about memory ranges. This will enable it (in a follow-up
patch) to augment the information obtained from the parser with data
obtained from actual object files.
The changes in the actual code are fairly straight-forward and just
involve moving code around. MinidumpParser::GetMemoryRegions is renamed
to BuildMemoryRegions to emphasize that it does no caching. The only new
thing is the additional bool flag returned from this function. This
indicates whether the returned regions describe all memory mapped into
the target process. Data obtained from /proc/maps and the MemoryInfoList
stream is considered to be exhaustive. Data obtained from Memory(64)List
is not. This will be used to determine whether we need to augment the
data or not.
This reshuffle means that it is no longer possible/easy to test some of
this code via unit tests, as constructing a ProcessMinidump instance is
hard. Instead, I update the unit tests to only test the parsing of the
actual data, and test the answering of queries through a lit test using
the "memory region" command. The patch also includes some tweaks to the
MemoryRegion class to make the unit tests easier to write.
Reviewers: amccarth, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D69035
Summary:
The minidump exception stream can report an exception record with
signal 0. If we try to create a stop reason with signal zero, processing
of the stop event won't find anything, and the debugger will hang.
So, simply early-out of RefreshStateAfterStop in this case.
Also set the UnixSignals object in DoLoadCore as is done for
ProcessElfCore.
Reviewers: labath, clayborg, jfb
Reviewed By: labath, clayborg
Subscribers: dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68096
llvm-svn: 375244
Summary: The types defined for it in LLDB are now redundant with core types.
Reviewers: labath, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68658
llvm-svn: 375243
This patch removes the size_t return value and the append parameter
from the remainder of the Find.* functions in LLDB's internal API. As
in the previous patches, this is motivated by the fact that these
parameters aren't really used, and in the case of the append parameter
were frequently implemented incorrectly.
Differential Revision: https://reviews.llvm.org/D69119
llvm-svn: 375160
Summary:
This patch re-types everywhere that passes a File::OpenOptions
as a uint32_t so it actually uses File::OpenOptions.
It also converts some OpenOptions related functions that fail
by returning 0 or NULL into llvm::Expected
split off from https://reviews.llvm.org/D68737
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68853
llvm-svn: 374817
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374631
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374626
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374622
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374620
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374609
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
llvm-svn: 374584
This patch adds an implementation of unwinding using PE EH info. It allows to
get almost ideal call stacks on 64-bit Windows systems (except some epilogue
cases, but I believe that they can be fixed with unwind plan disassembly
augmentation in the future).
To achieve the goal the CallFrameInfo abstraction was made. It is based on the
DWARFCallFrameInfo class interface with a few changes to make it less
DWARF-specific.
To implement the new interface for PECOFF object files the class PECallFrameInfo
was written. It uses the next helper classes:
- UnwindCodesIterator helps to iterate through UnwindCode structures (and
processes chained infos transparently);
- EHProgramBuilder with the use of UnwindCodesIterator constructs EHProgram;
- EHProgram is, by fact, a vector of EHInstructions. It creates an abstraction
over the low-level unwind codes and simplifies work with them. It contains
only the information that is relevant to unwinding in the unified form. Also
the required unwind codes are read from the object file only once with it;
- EHProgramRange allows to take a range of EHProgram and to build an unwind row
for it.
So, PECallFrameInfo builds the EHProgram with EHProgramBuilder, takes the ranges
corresponding to every offset in prologue and builds the rows of the resulted
unwind plan. The resulted plan covers the whole range of the function except the
epilogue.
Reviewers: jasonmolenda, asmith, amccarth, clayborg, JDevlieghere, stella.stamenova, labath, espindola
Reviewed By: jasonmolenda
Subscribers: leonid.mashinskiy, emaste, mgorny, aprantl, arichardson, MaskRay, lldb-commits, llvm-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67347
llvm-svn: 374528
Summary:
After rLLDB365761, and with `LLVM_ENABLE_ABI_BREAKING_CHECKS` enabled,
launching any process on FreeBSD crashes lldb with:
```
Expected<T> must be checked before access or destruction.
Expected<T> value was in success state. (Note: Expected<T> values in success mode must still be checked prior to being destroyed).
```
This is because `m_operation_thread` and `m_monitor_thread` were wrapped
in `llvm::Expected<>`, but this requires the objects to be correctly
initialized before accessing them.
To fix the crashes, use `llvm::Optional<>` for the members (as indicated
by labath), and use local variables to store the return values of
`LaunchThread` and `StartMonitoringChildProcess`. Then, only assign to
the member variables after checking if the return values indicated
success.
Reviewers: devnexen, emaste, MaskRay, mgorny
Reviewed By: devnexen
Subscribers: jfb, labath, krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D68723
llvm-svn: 374444
Summary:
This patch introduces a switch, based on the environment variable
`LLDB_USE_LLDB_SERVER`, to determine whether to use the `ProcessWindows` plugin
(the old way) or the `lldb-server` way for debugging on Windows.
Reviewers: labath, amccarth, asmith, stella.stamenova
Reviewed By: labath, amccarth
Subscribers: mstorsjo, abidh, JDevlieghere, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68258
llvm-svn: 374325
Stack unwinding was sometimes failing when trying to unwind stacks in 32 bit ARM. I discovered this was because the EH frame register numbers were not set. This patch fixes this issue and adds a unit test to verify this doesn't regress.
Differential Revision: https://reviews.llvm.org/D68088
llvm-svn: 374246
Summary: The PlaceholderObjectFile has an assert in SetLoadAddress that fires if "m_base == value" is not true. To avoid this, we create check that the base address matches, and if it doesn't we clear the module that was found using the UUID so that we create a new PlaceholderObjectFile. Added a test to cover this issue.
Reviewers: labath, aadsm, dvlahovski
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68106
llvm-svn: 374242
LLDB appears to have at least partial support for PPC, but PPC on Mach
isn't a thing AFAIK.
Differential Revision: https://reviews.llvm.org/D68661
llvm-svn: 374114
Summary:
Someone wrote SetEffectiveSetEffectiveGroupID instead of SetEffectiveUserID.
After this fix, the android process list can show user names, e.g.
```
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE ARGUMENTS
====== ====== ========== ========== ========== ========== ============================== ============================
529 1 root 0 root 0 /sbin/ueventd
```
Reviewers: labath,clayborg,aadsm,xiaobai
Subscribers:
llvm-svn: 373953
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
llvm-svn: 373931
There's no need to wrap the just-constructed json::Array in a
json::Value, we can just return that and pass ownership to the
raw_ostream.
llvm-svn: 373656
Although it's called "GetString", StreamString::GetString actually
returns a StringRef. Creating a json object with a StringRef does not
make a copy, which means the StringRef will be dangling as soon as the
underlying stream is destroyed. Add a .str() to force the json object to
hold a copy of the string.
This fixes nearly every test on linux.
llvm-svn: 373572
Summary:
This patch factors out File as an abstract base
class and moves most of its actual functionality into
a subclass called NativeFile. In the next patch,
I'm going to be adding subclasses of File that
don't necessarily have any connection to actual OS files,
so they will not inherit from NativeFile.
This patch was split out as a prerequisite for
https://reviews.llvm.org/D68188
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68317
llvm-svn: 373564
This patch replaces the LLDB's JSON implementation with the one from
LLVM in GDBRemoteCommunicationServerCommon.
Differential revision: https://reviews.llvm.org/D68304
llvm-svn: 373500
This patch replaces the LLDB's JSON implementation with the one from
LLVM in GDBRemoteCommunicationServerPlatform.
Differential revision: https://reviews.llvm.org/D68302
llvm-svn: 373499
This patch replaces the LLDB's JSON implementation with the one from
LLVM in GDBRemoteCommunicationClient.
Differential revision: https://reviews.llvm.org/D68301
llvm-svn: 373498
This patch replaces the LLDB's JSON implementation with the one from
LLVM in GDBRemoteCommunicationServerLLGS.
Differential revision: https://reviews.llvm.org/D68299
llvm-svn: 373497
This patch replaces the hand-rolled JSON emission in StructuredData with
LLVM's JSON library.
Differential revision: https://reviews.llvm.org/D68248
llvm-svn: 373359
Summary: This patch adds support of watchpoints to the new `NativeProcessWindows` plugin. The same tests as in D67168 pass with these changes when the old plugin is turned off, so they will cover this functionality when the old plugin is gone.
Reviewers: asmith, amccarth, stella.stamenova, labath
Reviewed By: labath
Subscribers: labath, jfb, JDevlieghere, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67222
llvm-svn: 373300
Summary:
It uses the new ability of ABI plugins to vend llvm::MCRegisterInfo
structs (which is what is needed to turn dwarf register numbers into
strings).
Reviewers: JDevlieghere, aprantl, jasonmolenda
Subscribers: tatyana-krasnukha, lldb-commits
Differential Revision: https://reviews.llvm.org/D67966
llvm-svn: 373208
Summary:
Windows unwinding is weird. The unwind rules do not (always) describe
the precise layout of the stack, but rather expect the debugger to scan
the stack for something which looks like a plausible return address, and
the unwind based on that. The reason this works somewhat reliably is
because the the unwinder also has access to the frame sizes of the
functions on the stack. This allows it (in most cases) to skip function
pointers in local variables or function arguments, which could otherwise
be mistaken for return addresses.
Implementing this kind of unwind mechanism in lldb was a bit challenging
because we expect to be able to statically describe (in the UnwindPlan)
structure, the layout of the stack for any given instruction. Giving a
precise desription of this is not possible, because it requires
correlating information from two functions -- the pushed arguments to a
function are considered a part of the callers stack frame, and their
size needs to be considered when unwinding the caller, but they are only
present in the unwind entry of the callee. The callee may end up being
in a completely different module, or it may not even be possible to
determine it statically (indirect calls).
This patch implements this functionality by introducing a couple of new
APIs:
SymbolFile::GetParameterStackSize - return the amount of stack space
taken up by parameters of this function.
SymbolFile::GetOwnFrameSize - the size of this function's frame. This
excludes the parameters, but includes stuff like local variables and
spilled registers.
These functions are then used by the unwinder to compute the estimated
location of the return address. This address is not always exact,
because the stack may contain some additional values -- for instance, if
we're getting ready to call a function then the stack will also contain
partially set up arguments, but we will not know their size because we
haven't called the function yet. For this reason the unwinder will crawl
up the stack from the return address position, and look for something
that looks like a possible return address. Currently, we assume that
something is a valid return address if it ends up pointing to an
executable section.
All of this logic kicks in when the UnwindPlan sets the value of CFA as
"isHeuristicallyDetected", which is also the final new API here. Right
now, only SymbolFileBreakpad implements these APIs, but in the future
SymbolFilePDB will use them too.
Differential Revision: https://reviews.llvm.org/D66638
llvm-svn: 373072
Summary:
This patch converts FileSystem::Open from this prototype:
Status
Open(File &File, const FileSpec &file_spec, ...);
to this one:
llvm::Expected<std::unique_ptr<File>>
Open(const FileSpec &file_spec, ...);
This is beneficial on its own, as llvm::Expected is a more modern
and recommended error type than Status. It is also a necessary step
towards https://reviews.llvm.org/D67891, and further developments
for lldb_private::File.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67996
llvm-svn: 373003
Fix NativeProcessNetBSD::Resume() to handle LLDB_INVALID_SIGNAL_NUMBER
correctly. Fixes breakage caused by r372090 and r372300. I have major
rewrite of that function pending; however, the fixes to gdb-remote
were committed prior to that.
llvm-svn: 372755
In these cases, the register number should be calculated from
fpu_d0, not fpu_s0.
Differential Revision: https://reviews.llvm.org/D67892
llvm-svn: 372738
While debugging on those architectures might not be supported yet,
the generic code should still be buildable. This file accesses x86
specific fields in the CONTEXT struct.
Differential Revision: https://reviews.llvm.org/D67911
llvm-svn: 372699
lvm_private::File::GetStream() can fail if m_options == 0
It's not clear from the header a File created with a descriptor will be
not be usable by many parts of LLDB unless SetOptions is also called,
but it is.
This is because those parts of LLDB rely on GetStream() to use the
file, and that in turn relies on calling fdopen on the descriptor. When
calling fdopen, GetStream relies on m_options to determine the access
mode. If m_options has never been set, GetStream() will fail.
This patch adds options as a required argument to File::SetDescriptor
and the corresponding constructor.
Patch by: Lawrence D'Anna
Differential revision: https://reviews.llvm.org/D67792
llvm-svn: 372652
This fixes build errors like these:
NativeRegisterContextWindows.h:22:33: error: extra qualification on member 'NativeRegisterContextWindows'
NativeRegisterContextWindows::NativeRegisterContextWindows(
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
Differential Revision: https://reviews.llvm.org/D67856
llvm-svn: 372482
Fix processing of "C" packet with signal for the whole process to
default signal value for action list to LLDB_INVALID_SIGNAL_NUMBER
rather than 0.
Differential Revision: https://reviews.llvm.org/D67625
llvm-svn: 372090
This moves the dumping logic from the GDBRemoteCommunicationHistory
class into the GDBRemotePacket so that it can be reused from the
reproducer command object.
llvm-svn: 372028
To support dumping the reproducer's GDB remote packets, we need the
(de)serialization logic to live in Utility rather than the GDB remote
plugin. This patch renames StreamGDBRemote to GDBRemote and moves the
relevant packet code there.
Its uses in the GDBRemoteCommunicationHistory and the
GDBRemoteCommunicationReplayServer are updated as well.
Differential revision: https://reviews.llvm.org/D67523
llvm-svn: 371907
Summary:
InferiorCall is only ever used in Process, and it is not specific to
POSIX. By moving it to Process, we can remove all dependencies on plugins from
Process. Moving InferiorCall to Process seems to achieve this quite well.
Additionally, the name InferiorCall is a little vague now, so we rename
it something a bit more specific.
Reviewers: JDevlieghere, clayborg, compnerd, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67472
llvm-svn: 371796
Originally the idea was for providers to be defined close to where they
are used. While this helped designing the providers in such a way that
they don't depend on each other, it also means that it's not possible to
access them from a central place. This proved to be a problem for some
providers and resulted in them living in the reproducer class.
The ProcessGDBRemote provider is the last remaining exception. This
patch makes things consistent and moves it into the reproducer like the
other providers.
llvm-svn: 371685
Summary:
InferiorCallPOSIX directly grabs a ClangASTContext from the Target it
has and does no error checking. I don't think these functions have a
reason to know about clang specifically. Additionally, using
`GetScratchTypeSystemForLanguage` forces us to do error checking since
it returns an Expected.
Differential Revision: https://reviews.llvm.org/D67427
llvm-svn: 371654
This removes the CleanUp class and replaces its usages with llvm's
ScopeExit, which has similar semantics.
Differential revision: https://reviews.llvm.org/D67378
llvm-svn: 371474
This is a fix for the issue described in r371144.
> On more than one occasion I've found this test got stuck during replay
> while waiting for a packet from debugserver when the debugger was in
> the process of being destroyed.
When the replay server is out of packets we should just disconnect so
the debugger doesn't have to do any cleanup that it wouldn't do during
capture.
llvm-svn: 371459
Summary:
This patch adds support of watchpoints to the old `ProcessWindows` plugin.
The `ProcessWindows` plugin uses the `RegisterContext` to set and reset
watchpoints. The `RegisterContext` has some interface to access watchpoints,
but it is very limited (e.g. it is impossible to retrieve the last triggered
watchpoint with it), that's why I have implemented a slightly different
interface in the `RegisterContextWindows`. Moreover, I have made the
`ProcessWindows` plugin responsible for search of a vacant watchpoint slot,
because watchpoints exist per-process (not per-thread), then we can place
the same watchpoint in the same slot in different threads. With this scheme
threads don't need to have their own watchpoint lists, and it simplifies
identifying of the last triggered watchpoint.
Reviewers: asmith, stella.stamenova, amccarth
Reviewed By: amccarth
Subscribers: labath, zturner, leonid.mashinskiy, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67168
llvm-svn: 371166
Summary:
With the XCode project gone, there doesn't seem to be anything setting
this macro anymore -- and the macro wasn't doing much anyway.
Reviewers: jingham, sgraenitz
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D66742
llvm-svn: 371018
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
Summary:
This patch follows the spirit of D63594, and removes some null checks
for things which should be operating invariants. Specifically
{Read,Write}[GF]PR now no longer check whether the supplied buffers are
null, because they never are. After this, the Do*** versions of these
function no longer serve any purpose and are inlined into their callers.
Other cleanups are possible here too, but I am taking this one step at a
time because this involves a lot of architecture-specific code, which I
don't have the hardware to test on (I did do a build-test though).
Reviewers: mgorny, jankratochvil, omjavaid, alexandreyy, uweigand
Subscribers: nemanjai, javed.absar, kbarton, lldb-commits
Differential Revision: https://reviews.llvm.org/D66744
llvm-svn: 370653
This patches paves way for upcoming SVE RegisterInfo definitions. This is cosmetic change which allows us to define ARM64 RegisterInfo using macros.
In future we ll have define two different RegisterInfos to choose between SVE vs non-SVE RegisterInfo with decision being made at thread creation.
Differential Revision: https://reviews.llvm.org/D66934
llvm-svn: 370644
Summary:
The DWARFExpression methods have a lot of arguments. This removes two of
them by removing the ability to slice the expression via two offset+size
parameters. This is a functionality that it is not always needed, and
when it is, we already have a different handy way of slicing a data
extractor which we can use instead.
Reviewers: JDevlieghere, clayborg
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D66745
llvm-svn: 370027
My previous attempt in attempt in r369904 actually broke the 32bit build
because File::Read expects to take a reference to size_t. Fix the
warning by using SIZE_MAX to denote failure instead.
llvm-svn: 369910
STATUS_SINGLE_STEP and STATUS_BREAKPOINT are defined as 0x8------ which
is negative and thus can't be implicitly narrowed to a DWORD which is
unsigned. The value is defined differently across winnt.h and ntstatus.h.
Patch by Gwen Mittertreiner!
llvm-svn: 369788
This recommits r368416, which was reverted in r368838 because of test
failures under ASAN. These have been dealt with by llvm r369370.
The original commit message was:
When opening a minidump, we were failing to find an executable because
we were searching for i386-unknown-windows, whereas we recognize the
pe/coff files as i386-pc-windows. This fixes the triple computation code
in the minidump parser to match pe/coff, and adds an appropriate test.
NB: I'm not sure setting the vendor to "pc" is really correct for
arm(64) windows, but right now that seems to match what we do in the
pe/coff case (ArchSpec.cpp:935).
Reviewers: clayborg, amccarth
Subscribers: javed.absar, kristof.beyls, rnk, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D65955
llvm-svn: 369523
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
I find as a good cleanup to drop the Compile method. As I do not find TIMTOWTDI
as an advantage and there is already constructor parameter to compile the
regex.
Differential Revision: https://reviews.llvm.org/D66392
llvm-svn: 369352
The actual include directory is lldb/Host/windows not
lldb/Host/Windows which breaks on case sensitive file systems
Patch by Gwen Mittertreiner!
llvm-svn: 369307
Originally I wanted to remove the RegularExpression class in Utility and
replace it with llvm::Regex. However, during that transition I noticed
that there are several places where need the regular expression string.
So instead I propose to keep the RegularExpression class and make it a
thin wrapper around llvm::Regex.
This patch also removes the workaround for empty regular expressions.
The result is that we are now (more or less) POSIX conformant.
Differential revision: https://reviews.llvm.org/D66174
llvm-svn: 369153
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
Although there is nothing wrong with this patch, the test added here
uncovers a problem in other parts of the code which cause the test to
fail when running under asan. Reverting the patch until I can fix the
underlying issue(s).
This reverts commit r368416.
llvm-svn: 368838
Summary:
This commit contains three small changes to enable lldb-server on Windows.
- Add lldb-server for Windows to the build
- Disable pty redirection on Windows for the initial lldb-server bring up
- Add a support to get the parent pid for a process on Windows
- Ifdef some signals which aren't supported on Windows
Thanks to Hui Huang for the help with this patch!
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, compnerd, Hui, amccarth, xiaobai, srhines, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61686
llvm-svn: 368774
Summary: Thanks to Hui Huang and the reviewers for all the help with this patch.
Reviewers: labath, Hui, jfb, clayborg, amccarth
Reviewed By: labath
Subscribers: amccarth, compnerd, dexonsmith, mgorny, jfb, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63165
llvm-svn: 368759
Pavel Labath