This change makes sure that DwarfUnit does not load a .dwo file until
necessary. I also take advantage of DWARF 5's guarantee that the first
support file is also the primary file to make it possible to create
a compile unit without loading the .dwo file.
Testcases now require Linux as it is needed for -gsplit-dwarf.
Review By: jankratochvil, dblaikie
Differential Revision: https://reviews.llvm.org/D100299
This change makes sure that DwarfUnit does not load a .dwo file until
necessary. I also take advantage of DWARF 5's guarantee that the first
support file is also the primary file to make it possible to create
a compile unit without loading the .dwo file.
Review By: jankratochvil, dblaikie
Differential Revision: https://reviews.llvm.org/D100299
This change makes sure that DwarfUnit does not load a .dwo file until
necessary. I also take advantage of DWARF 5's guarantee that the first
support file is also the primary file to make it possible to create
a compile unit without loading the .dwo file.
Review By: jankratochvil, dblaikie
Differential Revision: https://reviews.llvm.org/D100299
My D99653 implemented a getter GetRnglist() for m_rnglist_table.
That was confusing as the getter returns DWARFDebugRnglistTable which
contains DWARFDebugRnglist as its elements.
In D98289#inline-939112 @dblaikie said:
Perhaps this could be more informative about what makes the range list
index of 0 invalid? "index 0 out of range of range list table (with
range list base 0xXXX) with offset entry count of XX (valid indexes
0-(XX-1))" Maybe that's too verbose/not worth worrying about since
this'll only be relevant to DWARF producers trying to debug their
DWARFv5, maybe no one will ever see this message in practice. Just
a thought.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D102851
DW_AT_ranges can use DW_FORM_sec_offset (instead of DW_FORM_rnglistx).
In such case DW_AT_rnglists_base does not need to be present.
DWARF-5 spec:
"If the offset_entry_count is zero, then DW_FORM_rnglistx cannot
be used to access a range list; DW_FORM_sec_offset must be used
instead. If the offset_entry_count is non-zero, then
DW_FORM_rnglistx may be used to access a range list;"
This fix is for TestTypeCompletion.py category `dwarf` using GCC with DWARF-5.
The fix just provides GetRnglist() lazy getter for `m_rnglist_table`.
The testcase is easier to review by:
diff -u lldb/test/Shell/SymbolFile/DWARF/DW_AT_low_pc-addrx.s \
lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s
Differential Revision: https://reviews.llvm.org/D98289
In DWARF v4 compile units go in .debug_info and type units go in
.debug_types. However, in v5 both kinds of units are in .debug_info.
Therefore we can't decide whether to use the CU or TU index just by
looking at which section we're reading from. We have to wait until we
have read the unit type from the header.
Differential Revision: https://reviews.llvm.org/D96194
In split DWARF v5 files, the DWO id is no longer in the DW_AT_GNU_dwo_id
attribute. It's in the CU header instead. This change makes lldb look in
both places.
Differential Revision: https://reviews.llvm.org/D93444
LookupAddress makes no sense for DWARFTypeUnit.
Also make GetNonSkeletonUnit to preserve the called type.
Differential Revision: https://reviews.llvm.org/D89646
Parsing DWARFv5 debug_loclist offsets when a CU is parsed is weighing
down memory usage of symbolizers that don't need to parse this data at
all. There's not much benefit to caching these anyway - since they are
O(1) lookup and reading once you know where the offset list starts (and
can do bounds checking with the offset list size too).
In general, I think it might be time to start paying down some of the
technical debt of loc/loclist/range/rnglist parsing to try to unify it a
bit more.
eg:
* Currently DWARFUnit has: RangeSection, RangeSectionBase, LocSection,
LocSectionBase, LocTable, RngListTable, LoclistTableHeader (be nice if
these were all wrapped up in two variables - one for loclists, one for
rnglists)
* rnglists and loclists are handled differently (see:
LoclistTableHeader, but no RnglistTableHeader)
* maybe all these types could be less stateful - lazily parse what they
need to, even reparsing rather than caching because it doesn't seem
too expensive, for instance. (though admittedly so long as it's
constantcost/overead per compilatiton that's probably adequate)
* Maybe implementing and using a DWARFDataExtractor that can be
sub-ranged (so we could slice it up to just the single contribution) -
though maybe that's not so useful because loc/ranges need to refer to
it by absolute, not contribution-relative mechanisms
Differential Revision: https://reviews.llvm.org/D86110
This is mostly useful for Swift support; it allows LLDB to substitute
a matching SDK it shipped with instead of the sysroot path that was
used at compile time.
The goal of this is to make the Xcode SDK something that behaves more
like the compiler's resource directory, as in that it ships with LLDB
rather than with the debugged program. This important primarily for
importing Swift and Clang modules in the expression evaluator, and
getting at the APINotes from the SDK in Swift.
For a cross-debugging scenario, this means you have to have an SDK for
your target installed alongside LLDB. In Xcode this will always be the
case.
rdar://problem/60640017
Differential Revision: https://reviews.llvm.org/D76471
The only thing needed was to account for the offset from the
debug_cu_index section when searching for the location list.
This patch also fixes a bug in the Module::ParseAllDebugSymbols
function, which meant that we would only parse the variables of the
first compile unit in the module. This function is only used from
lldb-test, so this does not fix any real issue, besides preventing me
from writing a test for this patch.
Summary:
In dwp files a constant (from the debug_cu_index section) needs to be
added to each reference into the debug_str_offsets section.
I've tried to implement this to roughly match the llvm flow: I've
changed the DWARFormValue to stop resolving the indirect string
references directly -- instead, it calls into DWARFUnit, which resolves
this for it (similar to how it already resolves indirect range and
location list references). I've also done a small refactor of the string
offset base computation code in DWARFUnit in order to make it easier to
access the debug_cu_index base offset.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74723
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Summary:
This patch removes the bitrotted SymbolFileDWARF(Dwo)Dwp classes, and
replaces them with dwp support implemented directly inside
SymbolFileDWARFDwo, in a manner mirroring the implementation in llvm.
This patch does:
- add support for the .debug_cu_index section to our DWARFContext
- adds a llvm::DWARFUnitIndex argument to the DWARFUnit constructors.
This argument is used to look up the offsets of the debug_info and
debug_abbrev contributions in the sections of the dwp file.
- makes sure the creation of the DebugInfo object as well as the initial
discovery of DWARFUnits is thread-safe, as we can now call this
concurrently when doing parallel indexing.
This patch does not:
- use the DWARFUnitIndex to search for other kinds of contributions
(debug_loc, debug_ranges, etc.). This means that units which reference
these sections will not work correctly. These will be handled by
follow-up patches, but even the present level of support is sufficient
to enable basic functionality.
- Make the llvm::DWARFContext thread-safe. Right now, it just avoids this
problem by ensuring everything is initialized ahead of time. However,
this is something we will run into more often as we try to use more of
llvm, and so I plan to start looking into our options here.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: mgorny, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73783
This is the second dwp preparatory patch. When a SymbolFileDWARFDwo will
hold more than one split unit, it will not be able to be uniquely owned
by a single DWARFUnit. I achieve this by changing the
unique_ptr<SymbolFileDWARFDwo> member of DWARFUnit to
shared_ptr<DWARFUnit>. The shared_ptr points to a DWARFUnit, but it is
in fact holding the entire SymbolFileDWARFDwo alive. This is the same
method used by llvm DWARFUnit (except that is uses the DWARFContext
class).
Differential Revision: https://reviews.llvm.org/D73782
Summary:
This is a preparatory patch to re-enable DWP support in lldb (we already
have code claiming to do that, but it has been completely broken for a
while now).
The idea of the new approach is to make the SymbolFileDWARFDwo class
handle both dwo and dwo files, similar to how llvm uses one DWARFContext
to handle the two.
The first step is to remove the assumption that a SymbolFileDWARFDwo
holds just a single compile unit, i.e. the GetBaseCompileUnit method.
This requires changing the way how we reach the skeleton compile unit
(and the lldb_private::CompileUnit) from a dwo unit, which was
previously done via GetSymbolFile()->GetBaseCompileUnit() (and some
virtual dispatch).
The new approach reuses the "user data" mechanism of DWARFUnits, which
was used to link dwarf units (both skeleton and split) to their
lldb_private counterparts. Now, this is done only for non-dwo units, and
instead of that, the dwo units holds a pointer to the relevant skeleton
unit.
Reviewers: JDevlieghere, aprantl, clayborg
Reviewed By: JDevlieghere, clayborg
Subscribers: arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73781
This patchset is removing non-DWARF code from DWARFUnit for better
future merge with LLVM DWARF as discussed with @labath.
Differential revision: https://reviews.llvm.org/D70646
This patch removes the code (deep inside DWARFDebugInfoEntry) which
automagically returned the attributes of the dwo unit DIE when asking
for the attributes of the skeleton unit. This is fairly hacky, and not
consistent with how llvm DWARF parser operates.
Instead, I change the code the explicitly request (via
GetNonSkeletonUnit) the right unit to search (there were just two places
that needed this). If it turns out we need this more often, we can
create a utility function (external to DWARFUnit) for doing this.
Summary:
Our code was expecting that a single (symbol) file contains only one
kind of location lists. This is not correct (on non-apple platforms, at
least) as a file can compile units with different dwarf versions.
This patch moves the deteremination of location list flavour down to the
compile unit level, fixing this problem. I have also tried to rougly
align the code with the llvm DWARFUnit. Fully matching the API is not
possible because of how lldb's DWARFExpression lives separately from the
rest of the DWARF code, but this is at least a step in the right
direction.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71751
Summary:
A skeleton unit can easily be detected by checking the m_dwo_symbol_file
member, but we cannot tell a split unit from a normal unit from the
"inside", which is sometimes useful.
This patch adds a m_is_dwo member to enable this, and align the code
with llvm::DWARFUnit. Right now it's only used to avoid creating a split
unit inside another split unit (which removes one override from
SymbolFileDWARFDwo and brings us a step closer to deleting it), but my
main motivation is fixing the handling of location lists in mixed v4&v5
files. This comes in a separate patch.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71750
This function is not very useful, as it's forcing a materialization of
the returned DIEs, and calling it is not substantially simpler than just
iterating over the DIEs manually. Delete it, and rewrite the single
caller.
Summary:
This adds support for DWARF5 location lists which are specified
indirectly, via an index into the debug_loclists offset table. This
includes parsing the DW_AT_loclists_base attribute which determines the
location of this offset table, and support for new form DW_FORM_loclistx
which is used in conjuction with DW_AT_location to refer to the location
lists in this way.
The code uses the llvm class to parse the offset information, and I've
also tried to structure it similarly to how the relevant llvm
functionality works.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71268
Summary:
Our rnglist support was working only for the trivial cases (one CU),
because we only ever parsed one contribution out of the debug_rnglists
section. This means we were never able to resolve range lists for the
second and subsequent units (DW_FORM_sec_offset references came out
blang, and DW_FORM_rnglistx references always used the ranges lists from
the first unit).
Since both llvm and lldb rnglist parsers are sufficiently
self-contained, and operate similarly, we can fix this problem by
switching to the llvm parser instead. Besides the changes which are due
to variations in the interface, the main thing is that now the range
list object is a member of the DWARFUnit, instead of the entire symbol
file. This ensures that each unit can get it's own private set of range
list indices, and is consistent with how llvm's DWARFUnit does it
(overall, I've tried to structure the code the same way as the llvm
version).
I've also added a test case for the two unit scenario.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71021
Summary:
This commit achieves the following:
- Functions used to return a `TypeSystem *` return an
`llvm::Expected<TypeSystem *>` now. This means that the result of a call
is always checked, forcing clients to move more carefully.
- `TypeSystemMap::GetTypeSystemForLanguage` will either return an Error or a
non-null pointer to a TypeSystem.
Reviewers: JDevlieghere, davide, compnerd
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D65122
llvm-svn: 367360
Summary:
When dwo support was introduced, it used a trick where debug info
entries were referenced by the offset of the compile unit in the main
file, but the die offset was relative to the dwo file. Although there
was some elegance to it, this representation was starting to reach its
breaking point:
- the fact that the skeleton compile unit owned the DWO file meant that
it was impossible (or at least hard and unintuitive) to support DWO
files containing more than one compile unit. These kinds of files are
produced by LTO for example.
- it made it impossible to reference any DIEs in the skeleton compile
unit (although the skeleton units are generally empty, clang still
puts some info into them with -fsplit-dwarf-inlining).
- (current motivation) it made it very hard to support type units placed
in DWO files, as type units don't have any skeleton units which could
be referenced in the main file
This patch addresses this problem by introducing an new
"dwo_num" field to the DIERef class, whose purpose is to identify the
dwo file. It's kind of similar to the dwo_id field in DWARF5 unit
headers, but while this is a 64bit hash whose main purpose is to catch
file mismatches, this is just a smaller integer used to indentify a
loaded dwo file. Currently, this is based on the index of the skeleton
compile unit which owns the dwo file, but it is intended to be
eventually independent of that (to support the LTO use case).
Simultaneously the cu_offset is dropped to conserve space, as it is no
longer necessary. This means we can remove the "BaseObjectOffset" field
from the DWARFUnit class. It also means we can remove some of the
workarounds put in place to support the skeleton-unit+dwo-die combo.
More work is needed to remove all of them, which is out of scope of this
patch.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: mehdi_amini, dexonsmith, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D63428
llvm-svn: 364009
Previously it was storing a *pointer*, which left open the possibility
of this pointer being null. We never made use of that possibility (it
does not make sense), and most of the code was already assuming that.
However, there were a couple of null-checks scattered around the code.
This patch replaces the reference with a pointer, making the
non-null-ness explicit, and removes the remaining null-checks.
llvm-svn: 363381
Summary:
This patch creates a cache of file lists in line tables referenced by
type units. This cache is used to avoid parsing a line table twice
(since a file list will generally be shared by many type units).
It also sets things up in a way that parsing of DW_AT_decl_file
attributes will keep working even when we stop creating lldb compile
units for dwarf type units, but it stops short of actually doing that.
This means that the request for files now go directly to SymbolFileDWARF
instead of being routed there indirectly via the
lldb_private::CompileUnit class.
As a result of this, a number of occurences of SymbolContext variables
in DWARFASTParserClang have become unused, so I remove them.
This patch reduces the number of times a file list is being parsed, but
the situation is still suboptimal, as the parsed list is being copied
multiple times. This will be fixed when we stop creating CompileUnits
for DWARF type units.
Reviewers: clayborg, aprantl, JDevlieghere
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D62894
llvm-svn: 363143
Summary:
debug_ranges got renamed to debug_rnglists in DWARF 5. Prior to this
patch lldb was just picking the first section it could find in the file,
and using that for all address ranges lookups. This is not correct in
case the file contains a mixture of compile units with various standard
versions (not a completely unlikely scenario).
In this patch I make lldb support reading from both sections
simulaneously, and decide the correct section to use based on the
version number of the compile unit. SymbolFileDWARF::DebugRanges is
split into GetDebugRanges and GetDebugRngLists (the first one is renamed
mainly so we can catch all incorrect usages).
I tried to structure the code similarly to how llvm handles this logic
(hence DWARFUnit::FindRnglistFromOffset/Index), but the implementations
are still relatively far from each other.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D62302
llvm-svn: 361938
The fix form sizes use to have two arrays: one for 4 byte addresses and in for 8 byte addresses. The table had an issue where DW_FORM_flag_present wasn't being represented as a fixed size form because its actual size _is_ zero and zero was used to indicate the form isn't fixed in size. Any code that needed to quickly access the DWARF had to get a FixedFormSizes instance using the address byte size.
This fix cleans things up by adding a DWARFFormValue::GetFixedSize() both as a static method and as a member function on DWARFFormValue. It correctly can indicate if a form size is zero. This cleanup is a precursor to a follow up patch where I hope to speed up DWARF parsing.
I verified performance doesn't regress by loading hundreds of DWARF files and setting a breakpoint by file and line and by name in files that do not have DWARF indexes. Performance remained consistent between the two approaches.
Differential Revision: https://reviews.llvm.org/D62416
llvm-svn: 361675
Summary:
This patch implements the main feature of type units. When completing a
type, if we encounter a DW_AT_signature attribute, we use it's value to
lookup the complete definition of the type in the relevant type unit.
To enable this lookup, we build up a map of all type units in a symbol
file when parsing the units. Then we consult this map when resolving the
DW_AT_signature attribute.
I include add a couple of tests which exercise the type lookup feature,
including one that ensure we do something reasonable in case we fail to
lookup the type.
A lot of the ideas in this patch have been taken from D32167 and D61505.
Reviewers: clayborg, JDevlieghere, aprantl, alexshap
Subscribers: mgrang, lldb-commits
Differential Revision: https://reviews.llvm.org/D62246
llvm-svn: 361603
Summary:
Type units don't describe any code, so they should never be the result
of any address lookup queries.
Previously, we would compute the address ranges for the type units for
via the line tables they reference because the type units looked a lot
like line-tables-only compile units. However, this is not correct, as
the line tables are only referenced from type units so that other
declarations can use the file names contained in them.
In this patch I make the BuildAddressRangeTable function virtual, and
implement it only for compile units.
Testing this was a bit tricky, because the behavior depends on the order
in which we add things to the address range map. This rarely caused a
problem with DWARF v4 type units, as they are always added after all
CUs. It happened more frequently with DWARF v5, as there clang emits the
type units first. However, this is still not something that it is
required to do, so for testing I've created an assembly file where I've
deliberately sandwiched a compile unit between two type units, which
should isolate us from both changes in how the compiler emits the units
and changes in the order we process them.
Reviewers: clayborg, aprantl, JDevlieghere
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D62178
llvm-svn: 361465
Summary:
This patch introduces the DWARFTypeUnit class, and teaches lldb to parse
type units out of both the debug_types section (DWARF v4), and from the
regular debug_info section (DWARF v5).
The most important piece of functionality - resolving DW_AT_signatures
to connect type forward declarations to their definitions - is not
implemented here, but even without that, a lot of functionality becomes
available. I've added tests for the commands that start to work after
this patch.
The changes in this patch were greatly inspired by D61505, which in turn took
over changes from D32167.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: mgorny, jankratochvil, lldb-commits
Differential Revision: https://reviews.llvm.org/D62008
llvm-svn: 361360
In D61502#1503247 @clayborg suggested that SymbolFileDWARF *dwarf2Data is
really redundant in all the calls with also having DWARFUnit *cu. So remove it.
One `SymbolFileDWARF *` nullptr check
(DWARFDebugInfoEntry::GetDIENamesAndRanges) could be removed, other two nullptr
checks (DWARFDebugInfoEntry::GetName and DWARFDebugInfoEntry::AppendTypeName)
need to stay in place (now for `DWARFUnit *`).
Differential Revision: https://reviews.llvm.org/D62011
llvm-svn: 361277
Summary:
This patch introduces the DWARFUnitHeader class. Its purpose (and its
structure, to the extent it was possible to make it) is the same as its
LLVM counterpart -- to extract the unit header information before we
actually construct the unit, so that we know which kind of units to
construct. This is needed because as of DWARF5, type units live in the
.debug_info section, which means it's not possible to statically
determine the type of units in a given section.
Reviewers: aprantl, clayborg, JDevlieghere
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D62073
llvm-svn: 361224
Summary:
This patch adds the ability to precisely address debug info in
situations when a single file can have more than one debug-info-bearing
sections (as is the case with type units in DWARF v4).
The changes here can be classified into roughly three categories:
- the code which addresses a debug info by offset gets an additional
argument, which specifies the section one should look into.
- the DIERef class also gets an additional member variable specifying
the section. This way, code dealing with DIERefs can know which
section is the object referring to.
- the user_id_t encoding steals one bit from the dwarf_id field to store
the section. This means the total number of separate object files
(apple .o, or normal .dwo) is limited to 2 billion, but that is fine
as it's not possible to hit that number without switching to DWARF64
anyway.
This patch is functionally equivalent to (and inspired by) the two
patches (D61503 and D61504) by Jan Kratochvil, but there are differences
in the implementation:
- it uses an enum instead of a bool flag to differentiate the sections
- it increases the size of DIERef struct instead of reducing the amount
of addressable debug info
- it sets up DWARFDebugInfo to store the units in a single vector
instead of two. This sets us up for the future in which type units can
also live in the debug_info section, and I believe it's cleaner
because there's no need for unit index remapping
There are no tests with this patch as this is essentially NFC until
we start parsing type units from the debug_types section.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: arphaman, jankratochvil, lldb-commits
Differential Revision: https://reviews.llvm.org/D61908
llvm-svn: 360872
D42892 changed a lot of code to use superclass DWARFUnit instead of its
subclass DWARFCompileUnit.
Finish this change more thoroughly for any *CompileUnit* -> *Unit* names.
Later patch will introduce DWARFTypeUnit which needs to be sometimes different
from DWARFCompileUnit and it would be confusing without this renaming.
Differential Revision: https://reviews.llvm.org/D61501
llvm-svn: 360443
Summary:
The implementation of GetID used a relatively complicated algorithm,
which returned some kind of an offset of the unit in some file
(depending on the debug info flavour). The only thing this ID was used
for was to enable subseqent retrieval of the unit from the SymbolFile.
This can be made simpler if we just make the "ID" of the unit an index
into the list of the units belonging to the symbol file. We already
support indexed access to the units, so each unit already has a well
"index" -- this just makes it accessible from within the unit.
To make the distincion between "id" and "offset" clearer (and help catch
any misuses), I also rename DWARFDebugInfo::GetCompileUnit (which
accesses by offset) into DWARFDebugInfo::GetCompileUnitAtOffset.
On its own, this only brings a minor simplification, but it enables
further simplifications in the DIERef class (coming in a follow-up
patch).
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: arphaman, jdoerfert, lldb-commits, tberghammer, jankratochvil
Differential Revision: https://reviews.llvm.org/D61481
llvm-svn: 360014
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
This reverts commit r356682 because it breaks the DWO flavours of some
tests:
lldb-Suite :: lang/c/const_variables/TestConstVariables.py
lldb-Suite :: lang/c/local_variables/TestLocalVariables.py
lldb-Suite :: lang/c/vla/TestVLA.py
llvm-svn: 356773
This is mostly mechanical, and just moves the remaining non-DWO
related sections over to DWARFContext.
Differential Revision: https://reviews.llvm.org/D59611
llvm-svn: 356682
All of this is code that is unreferenced. Removing as much of
this as possible makes it more easy to determine what functionality
is missing and/or shared between LLVM and LLDB's DWARF interfaces.
llvm-svn: 356509
LLVM doesn't produce DWARF64, and neither does GCC. LLDB's support
for DWARF64 is only partial, and if enabled appears to also not work.
Finally, it's untested. Removing this makes merging LLVM and
LLDB's DWARF parsing implementations simpler.
Differential Revision: https://reviews.llvm.org/D59235
llvm-svn: 355975
This is a very thin wrapper over a std::vector<DWARFDIE> and does
not seem to provide any real value over just using a container
directly.
Differential Revision: https://reviews.llvm.org/D59165
llvm-svn: 355974
Eric Leese