Summary:
This will allow us to fix the issue where the lost locations
verifier causes CodeGen changes on lost locations because it
falls back on DAGISel
Reviewers: qcolombet, bogner, aprantl, vsk, paquette
Subscribers: rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78261
Summary:
As a follow up to https://reviews.llvm.org/D29014, add translation
support for freeze.
Introduce a new generic instruction G_FREEZE and translate freeze to it.
Reviewers: dsanders, aqjune, arsenm, aditya_nandakumar, t.p.northover, lebedev.ri, paquette, aemerson
Reviewed By: aqjune, arsenm
Subscribers: fhahn, lebedev.ri, wdng, rovka, hiraditya, jfb, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77795
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
Summary:
When narrowing G_IMPLICIT_DEF where the original size is not a multiple
of the narrow size, emit a smaller G_IMPLICIT_DEF and use G_ANYEXT.
To prevent a potential endless loop in the legalizer, the condition
to combine G_ANYEXT(G_IMPLICIT_DEF) is changed from isInstUnsupported
to !isInstLegal, since in this case the combine is only valid if
consequent legalization of the newly combined G_IMPLICIT_DEF does not
introduce G_ANYEXT due to narrowing.
Although this legalization for G_IMPLICIT_DEF would also be valid for
the general case, it actually caused a lot of code regressions when
tried due to superfluous COPYs and combines not getting hit anymore.
Reviewers: dsanders, aemerson, volkan, arsenm, aditya_nandakumar
Reviewed By: arsenm
Subscribers: jvesely, nhaehnle, kerbowa, wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76598
Summary: I think it would be better to require the alignment to be >= 1. It is currently confusing to allow both values.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77372
The legalizer has a tendency to lose DebugLoc's when expanding or
combining instructions. The verifier that detected these isn't ready
for upstreaming yet but this patch fixes the cases that came up when
applying it to our out-of-tree backend's CodeGen tests.
This pattern comes up a few more times in this file and probably in
the backends too but I'd prefer to fix the others separately (and
preferably when the lost-location verifier detects them).
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
When we have
```
a = G_OR x, x
```
or
```
b = G_AND y, y
```
We can drop the G_OR/G_AND and just use x/y respectively.
Also update arm64-fallback.ll because there was an or in there which hits this
transformation.
Differential Revision: https://reviews.llvm.org/D77105
Implement identity combines for operations like the following:
```
%a = G_SUB %b, 0
```
This can just be replaced with %b.
Over CTMark, this gives some minor size improvements at -O3.
Differential Revision: https://reviews.llvm.org/D76640
This reverts commit b3297ef051.
This change is incorrect. The current semantic of null in the IR is a
pointer with the bitvalue 0. It is not a cast from an integer 0, so
this should preserve the pointer type.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
When we see this:
```
%a = COPY $physreg
...
SOMETHING implicit-def $physreg
...
%b = COPY $physreg
```
The two copies are not equivalent, and so we shouldn't perform any folding
on them.
When we have two instructions which use a physical register check that they
define the same virtual register(s) as well.
e.g., if we run into this case
```
%a = COPY $physreg
...
%b = COPY %a
```
we can say that the two copies are the same, and can be folded.
Differential Revision: https://reviews.llvm.org/D76890
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary:
The existing helper function can only create a libcall to functions available in
RTLIB. Add a helper function that can create a libcall to a given function name
using the provided calling convention.
Reviewers: aditya_nandakumar, t.p.northover, rovka, arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76845
For some operations, the type is unimportant and only the number of
bits matters. For example I don't want to treat <4 x s8> as a legal
type, but I also don't want to decompose loads of this into smaller
pieces to get legal register types.
On AMDGPU in SelectionDAG, we legalize a number of operations (most
notably load and store) by coercing all types to vectors of i32. For
GlobalISel, I'm trying very hard to avoid doing this for every type,
but I don't think this strategy can be completely avoided. I'm trying
to avoid bitcasts for any legitimately legal type we can operate on,
since the intervening bitcasts have proven to be a hassle.
For loads, I think I can get away without ever casting the result
type, and handling any arbitrary bitwidth during selection (I will
eventually want new tablegen support to help with this, rather than
having to add every possible type as legal). The unmerge required to
do anything with the value should expand to the expected shifts. This
is trickier for stores, since it would now require handling a wide
array of truncates during selection which I don't want.
Future potentially interesting case are for vector indexing, where
sub-dword type should be indexed in s32 pieces.
When we find something like this:
```
%a:_(s32) = G_SOMETHING ...
...
%select:_(s32) = G_SELECT %cond(s1), %a, %a
```
We can remove the select and just replace it entirely with `%a` because it's
always going to result in `%a`.
Same if we have
```
%select:_(s32) = G_SELECT %cond(s1), %a, %b
```
where we can deduce that `%a == %b`.
This implements the following cases:
- `%select:_(s32) = G_SELECT %cond(s1), %a, %a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %some_copy_from_a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %b` -> `%a` when `%a` and `%b`
are defined by identical instructions
This gives a few minor code size improvements on CTMark at -O3 for AArch64.
Differential Revision: https://reviews.llvm.org/D76523
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
Summary:
Add new generic MIR opcodes G_SADDSAT etc. Add support in IRTranslator
for translating the saturating add/subtract intrinsics to the new
opcodes.
Reviewers: aemerson, dsanders, paquette, arsenm
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76600
Summary:
Widening G_UNMERGE_VALUES to a type which is larger than the
original source type is the same as widening it to the same
type as the source type: in both cases, G_UNMERGE_VALUES has
to be replaced with bit arithmetic which. Although the arithmetic
itself is independent of whether the source type is smaller
or equal to the widen type, widening the source type to the
widen type should result in less artifacts being emitted,
since this is the type that the user explicitly requested.
Reviewers: arsenm, dsanders, aemerson, aditya_nandakumar
Reviewed By: arsenm, dsanders
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76494
This reverts commit e9f22fd429.
When building with -DLLVM_USE_SANITIZER="Thread", check-llvm has 70
failing tests with this revision, and 29 without this revision.
Port over the following:
- shuffle undef, undef, any_mask -> undef
- shuffle anything, anything, undef_mask -> undef
This sort of thing shows up a lot when you try to bugpoint code containing
shufflevector.
Differential Revision: https://reviews.llvm.org/D76382
This patch generates TableGen descriptions for the specified register
banks which contain a list of register sizes corresponding to the
available HwModes. The appropriate size is used during codegen according
to the current HwMode. As this HwMode was not available on generation,
it is set upon construction of the RegisterBankInfo class. Targets
simply need to provide the HwMode argument to the
<target>GenRegisterBankInfo constructor.
The RISC-V RegisterBankInfo constructor has been updated accordingly
(plus an unused argument removed).
Differential Revision: https://reviews.llvm.org/D76007
This ports some combines from DAGCombiner.cpp which perform some trivial
transformations on instructions with undef operands.
Not having these can make it extremely annoying to find out where we differ
from SelectionDAG by looking at existing lit tests. Without them, we tend to
produce pretty bad code generation when we run into instructions which use
undef operands.
Also remove the nonpow2_store_narrowing testcase from arm64-fallback.ll, since
we no longer fall back on the add.
Differential Revision: https://reviews.llvm.org/D76339
I used the implementation for floor instead of round. It also turns
out the OpenCL builtin library wasn't using the round builtin, but
implemented the expanded form.
Summary: When narrowing a scalar G_EXTRACT where the destination lines up perfectly with a single result of the emitted G_UNMERGE_VALUES a COPY should be emitted instead of unconditionally trying to emit a G_MERGE_VALUES.
Reviewers: arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75743
If the loaded memory size was smaller than the result size, this would
produce out of bounds memory accesses. I'm wondering if we need a
distinct narrow memory legalize action type, since a case I care about
is decomposing a 4-byte unaligned access into 4 extending loads, which
would leave the original result register type. I'm currently awkwardly
using narrowScalar to handle unaligned accesses that need to be split.
This reverts commit 5583c2f2fb.
The lldb bot failure was a test that was fragile and sensitive to irrelevant
changes in instruction ordering. Re-committing this as the test should have
been skipped for AArch64 now.
Differential Revision: https://reviews.llvm.org/D75555
This changes the localizer to attempt intra-block localizer of instructions
that have local uses. This is useful because sometimes the entry block itself
has many uses of constant-like instructions, which would benefit from shortening
live ranges. Previously if an inst had no non-local uses, we wouldn't add it to
the list of instructions to attempt further intra-block localization.
This gives a 0.7% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D75555
Unlike what I claimed in my previous commit. The caching is
actually not NFC on PHIs.
When we put a big enough max depth, we end up simulating loops.
The cache is effectively cutting the simulation short and we
get less information as a result.
E.g.,
```
v0 = G_CONSTANT i8 0xC0
jump
v1 = G_PHI i8 v0, v2
v2 = G_LSHR i8 v1, 1
```
Let say we want the known bits of v1.
- With cache:
Set v1 cache to we know nothing
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is in the cache
=> v1 is 0, thus v2 is 0x80
Finally v1 is v0 & v2 => 0x80
- Without cache and enough depth to do two iteration of the loop:
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is v0 & v2
v0 is 0xC0
v2 is v1 >> 1
Reach the max depth for v1...
unwinding
v1 is know nothing
v2 is 0x80
v0 is 0xC0
v1 is 0x80
v2 is 0xC0
v0 is 0xC0
v1 is 0xC0
Thus now v1 is 0xC0 instead of 0x80.
I've added a unittest demonstrating that.
NFC
Changes the handling of odd breakdowns, and avoids using
G_EXTRACT/G_INSERT. Pad with undef to a wider size, and unmerge. Also
avoid introducing instructions for the fully undef components.
This patch adds a cache that is valid only for the duration of a call
to getKnownBits. With such short lived cache we avoid all the problems
of cache invalidation while still getting the benefits of reusing
the information we already computed.
This cache is useful whenever an instruction occurs more than once
in a chain of computation.
E.g.,
v0 = G_ADD v1, v2
v3 = G_ADD v0, v1
Previously we would compute the known bits for:
v1, v2, v0, then v1 again and finally v3.
With the patch, now we won't have to recompute v1 again.
NFC
When analyzing PHIs, we gather the known bits for every operand and
merge them together to get the known bits of the result of the PHI.
It is not unusual that merging the information leads to know nothing
on the result (e.g., phi a: i8 3, b: i8 unknown, ..., after looking at the
second argument we know we will know nothing on the result), thus, as
soon as we reach that state, stop analyzing the following operand (i.e.,
on the previous example, we won't process anything after looking at `b`).
This improves compile time in particular with PHIs with a large number
of operands.
NFC.
https://reviews.llvm.org/D67133
While investigating some non determinism (CSE doesn't produce wrong
code, it just doesn't CSE some times) in GISel CSE on an out of tree
target, I realized that the core issue was that there were lots of code
that mutates (setReg, setRegClass etc), but doesn't notify observers
(CSE in this case but this could be any other observer). In order to
make the Observer be available in various parts of code and to avoid
having to thread it through various API, the MachineFunction now has the
observer as field. This allows it to be easily used in helper functions
such as constrainOperandRegClass.
Also added some invariant verification method in CSEInfo which can
catch these issues (when CSE is enabled).
Produce an unmerge to a narrower type and introduce a narrower shift
if needed. I wasn't sure if there was a better way to parameterize the
target's preferred shift type for the GICombineRule, so manually call
the combine helper.
This is more or less directly ported from the AMDGPU custom lowering
for FP_TO_FP16. I made a few minor fixups (using G_UNMERGE_VALUES
instead of creating shift/trunc to extract the two halves, and zexting
an inverted compare instead of select_cc).
This also does not include the fast math expansion the DAG which
converts to f32 and then to f16. I think that belongs in a
pre-legalize combine instead.
Like COPY instructions explained in D70616, we don't check the constraints
when combining G_UNMERGE_VALUES. Use the same logic used in D70616 to check
if registers can be replaced, or a COPY instruction needs to be built.
https://reviews.llvm.org/D70564
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
A downstream test exposed a simple logic bug with the manual pointer
stripping code, fix that by just using stripPointerCasts() on the value.
I don't think there's a way to expose this issue upstream.
Calls to ObjC's objc_msgSend function are done by bitcasting the function global
to the required function type signature. This patch looks through this bitcast
so that we can do a direct call with bl on arm64 instead of using an indirect blr.
Differential Revision: https://reviews.llvm.org/D74241
Allows more flexible use of buildMerge in places where
use operands are available as SrcOp since it does not
require explicit conversion to Register.
Simplify code with new buildMerge.
Differential Revision: https://reviews.llvm.org/D74223
This is a one off special case, since actually implementing full inline asm
support will be much more involved. This lets us compile a lot more code as a
common simple case.
Differential Revision: https://reviews.llvm.org/D74201
The type passed to lower was invalid, so I'm not sure how this was
even working before. The source and destination type also do not have
to match, so make sure to use the right ones.
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
The legalizer produces a lot of these, and they make reading legalized
MIR annoying. For some reason, this does seem to sometimes introduce
copies of implicit def, which is dumb.
contractCrossBankCopyIntoStore() finds the instruction defines the
source register and uses its output to replace the register. There are,
however, instructions that have multiple outputs, e.g. G_UNMERGE_VALUES.
Current implementation hardcodes to operand 0 and has no way of knowing
which output should be used.
This change adds another function to directly return the register that
is the source of the register and use that for folding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44783
Differential Revision: https://reviews.llvm.org/D74005
Start using a new strategy with a combination of merge and unmerges.
This allows scalarizing before lowering, which in cases like
<2 x s128> avoids producing giant illegal shifts.
Summary:
Applying this cleanup:
- MIRBuilder.buildInstr(TargetOpcode::G_ASHR)
- .addDef(Shifted)
- .addUse(Res)
- .addUse(ShiftAmt);
+ MIRBuilder.buildAShr(Shifted, Res, ShiftAmt);
caused an assertion failure here:
llc: /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/MachineRegisterInfo.cpp:404: llvm::MachineInstr *llvm::MachineRegisterInfo::getVRegDef(unsigned int) const: Assertion `(I.atEnd() || std::next(I) == def_instr_end()) && "getVRegDef assumes a single definition or no definition"' failed.
#4 0x00000000050a6d96 in llvm::MachineRegisterInfo::getVRegDef (this=0x74606a0, Reg=2147483650) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/MachineRegisterInfo.cpp:403
#5 0x00000000066148f6 in llvm::getConstantVRegValWithLookThrough (VReg=2147483650, MRI=..., LookThroughInstrs=false, HandleFConstant=true) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:244
#6 0x00000000066147da in llvm::getConstantVRegVal (VReg=2147483650, MRI=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:210
#7 0x0000000006615367 in llvm::ConstantFoldBinOp (Opcode=101, Op1=2147483650, Op2=2147483656, MRI=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:341
#8 0x000000000657eee0 in llvm::CSEMIRBuilder::buildInstr (this=0x7465010, Opc=101, DstOps=..., SrcOps=..., Flag=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/CSEMIRBuilder.cpp:160
#9 0x0000000003645958 in llvm::MachineIRBuilder::buildAShr (this=0x7465010, Dst=..., Src0=..., Src1=..., Flags=...) at /home/jayfoad2/git/llvm-project/llvm/include/llvm/CodeGen/GlobalISel/MachineIRBuilder.h:1298
#10 0x00000000065c35b1 in llvm::LegalizerHelper::lower (this=0x7fffffffb5f8, MI=..., TypeIdx=0, Ty=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2020
because at this point there are two instructions defining Res: the
original G_SMULO/G_UMULO and the new G_MUL that we built. The fix is
to modify the original mul in place, so that there is only ever one
definition of Res.
Reviewers: arsenm, aditya_nandakumar
Subscribers: wdng, rovka, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72842
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
One of the exit criteria of computeKnownBits is whether we reach the max
recursive call depth. Before this patch we would check that the
depth is exactly equal to max depth to exit.
Depth may get bigger than max depth if it gets passed to a different
GISelKnownBits object.
This may happen when say a generic part uses a GISelKnownBits object
with some max depth, but then we hit TL.computeKnownBitsForTargetInstr
which creates a new GISelKnownBits object with a different and smaller
depth. In that situation, when we hit the max depth check for the first
time in the target specific GISelKnownBits object, depth may already
be bigger than the current max depth. Hence we would continue to compute
the known bits, until we ran through the full depth of the chain of
computation or ran out of stack space.
For instance, let say we have
GISelKnownBits Info(/*MaxDepth*/ = 10);
Info.getKnownBits(Foo)
// 9 recursive calls to computeKnownBitsImpl.
// Then we hit a target specific instruction.
// The target specific GISelKnownBits does this:
GISelKnownBits TargetSpecificInfo(/*MaxDepth*/ = 6)
TargetSpecificInfo.computeKnownBitsImpl() // <-- next max depth checks would
// always return false.
This commit does not have any test case, none of the in-tree targets
use computeKnownBitsForTargetInstr.
We can have geps that have a scalar base pointer, and a vector index value, which
means that the base pointer must be splatted into a vector of pointers.
This fixes crashes on arm64 GlobalISel with optimizations enabled.
Commit 9965b12fd1 was supposed to change the offset constant when
lowering load/stores, but only introduced this change for loads. This
patch adds the same fix for stores.
This is passed to legalizeCustom, but not intrinsic. Also remove the
MRI argument, since you can get that from the MachineIRBuilder.
I'm not sure why MachineIRBuilder has a private observer member, and
this is passed separately.
For pow2 constants we should use G_SHL for pattern matching (and perf)
purposes later.
Vector support not yet implemented.
Differential Revision: https://reviews.llvm.org/D73659
Summary:
This is mostly NFC. computeForAddSub may give more precise results in
some cases, but that doesn't seem to affect any existing GlobalISel
tests.
Subscribers: rovka, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73431
G_CTPOP is generated from llvm.ctpop.<type> intrinsics, clang generates
these intrinsics from __builtin_popcount and __builtin_popcountll.
Add lower and narrow scalar for G_CTPOP.
Lower G_CTPOP for MIPS32.
Differential Revision: https://reviews.llvm.org/D73216
llvm.cttz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
G_CTTZ is generated from llvm.cttz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_ctz and
__builtin_ctzll.
G_CTTZ_ZERO_UNDEF comes from llvm.cttz.<type> (<type> <src>, i1 true).
Clang generates such intrinsics as parts of expansion of builtin_ffs
and builtin_ffsll. It is also traditionally part of and many
algorithms that are now predicated on avoiding zero-value inputs.
Add narrow scalar (algorithm uses G_CTTZ_ZERO_UNDEF) for G_CTTZ.
Lower G_CTTZ and G_CTTZ_ZERO_UNDEF for MIPS32.
Differential Revision: https://reviews.llvm.org/D73215
llvm.ctlz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
MIPS clz instruction returns 32 for zero input.
G_CTLZ is generated from llvm.ctlz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_clz and
__builtin_clzll.
G_CTLZ_ZERO_UNDEF can also be generated from llvm.ctlz with true as
second argument. It is also traditionally part of and many algorithms
that are now predicated on avoiding zero-value inputs.
Add narrow scalar for G_CTLZ (algorithm uses G_CTLZ_ZERO_UNDEF).
Lower G_CTLZ_ZERO_UNDEF and select G_CTLZ for MIPS32.
Differential Revision: https://reviews.llvm.org/D73214
Teach the GISelKnowBits analysis how to deal with PHI operations.
PHIs are essentially COPYs happening on edges, so we can just reuse
the code for COPY.
This is NFC COPY-wise has we leave Depth untouched when calling
computeKnownBitsImpl for COPYs, like it was before this patch.
Increasing Depth is however required for PHIs as they may loop back to
themselves and we would end up in an infinite loop if we were not
increasing Depth.
Differential Revision: https://reviews.llvm.org/D73317
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
This was assuming the narrow target was the source type. Respect the
requested type when these don't match by using intermediate
merges. This avoids producing very wide, illegal shift expansions.
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
This now develops the same problem G_ZEXT/G_ANYEXT have where the
requested type is assumed to be the source type. This will be fixed
separately by creating intermediate merges.
Bitcast only really applies between scalars and vectors. Implement as
an unmerge and remerge. The test needs to tolerate failure since one
of the unmerges currently fails to legalize.
We're planning to remove the shufflemask operand from ShuffleVectorInst
(D72467); fix GlobalISel so it doesn't depend on that Constant.
The change to prelegalizercombiner-shuffle-vector.mir happens because
the input contains a literal "-1" in the mask (so the parser/verifier
weren't really handling it properly). We now treat it as equivalent to
"undef" in all contexts.
Differential Revision: https://reviews.llvm.org/D72663
As an intermediate step, some TLI functions can be converted to using
LLT instead of MVT. Move this somewhere out of GlobalISel so DAG
functions can use these.
AMDGPU can't unambiguously go back from the selected instruction
register class to the register bank without knowing if this was used
in a boolean context.
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).
There's no major functionality change, except for targets that never
implemented this check.
This LLVM attribute was originally added in
d9699bc7bd (2015).
Reviewers: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D72118
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Recommit notes:
Introduce temporary variables in order to make sure
instructions get inserted into MachineFunction in same order
regardless of compiler used to build llvm.
Differential Revision: https://reviews.llvm.org/D71363
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Differential Revision: https://reviews.llvm.org/D71363
G_BSWAP is generated from llvm.bswap.<type> intrinsics, clang genrates
these intrinsics from __builtin_bswap32 and __builtin_bswap64.
Add lower and narrowscalar for G_BSWAP.
Lower G_BSWAP on MIPS32, select G_BSWAP on MIPS32 revision 2 and later.
Differential Revision: https://reviews.llvm.org/D71362
As the extern_weak target might be missing, resolving to the absolute
address zero, we can't use the normal direct PC-relative branch
instructions (as that would result in relocations out of range).
Improve the classifyGlobalFunctionReference method to set
MO_DLLIMPORT/MO_COFFSTUB, and simplify the existing code in
AArch64TargetLowering::LowerCall to use the return value from
classifyGlobalFunctionReference for these cases.
Add code in both AArch64FastISel and GlobalISel/IRTranslator to
bail out for function calls to extern weak functions on windows,
to let SelectionDAG handle them.
This matches what was done for X86 in 6bf108d77a.
Differential Revision: https://reviews.llvm.org/D71721
Legalization algorithm is complicated by two facts:
1) While regular instructions should be possible to legalize in
an isolated, per-instruction, context-free manner, legalization
artifacts can only be eliminated in pairs, which could be deeply, and
ultimately arbitrary nested: { [ () ] }, where which paranthesis kind
depicts an artifact kind, like extend, unmerge, etc. Such structure
can only be fully eliminated by simple local combines if they are
attempted in a particular order (inside out), or alternatively by
repeated scans each eliminating only one innermost pair, resulting in
O(n^2) complexity.
2) Some artifacts might in fact be regular instructions that could (and
sometimes should) be legalized by the target-specific rules. Which
means failure to eliminate all artifacts on the first iteration is
not a failure, they need to be tried as instructions, which may
produce more artifacts, including the ones that are in fact regular
instructions, resulting in a non-constant number of iterations
required to finish the process.
I trust the recently introduced termination condition (no new artifacts
were created during as-a-regular-instruction-retrial of artifacts not
eliminated on the previous iteration) to be efficient in providing
termination, but only performing the legalization in full if and only if
at each step such chains of artifacts are successfully eliminated in
full as well.
Which is currently not guaranteed, as the artifact combines are applied
only once and in an arbitrary order that has to do with the order of
creation or insertion of artifacts into their worklist, which is a no
particular order.
In this patch I make a small change to the artifact combiner, making it
to re-insert into the worklist immediate (modulo a look-through copies)
artifact users of each vreg that changes its definition due to an
artifact combine.
Here the first scan through the artifacts worklist, while not
being done in any guaranteed order, only needs to find the innermost
pair(s) of artifacts that could be immediately combined out. After that
the process follows def-use chains, making them shorter at each step, thus
combining everything that can be combined in O(n) time.
Reviewers: volkan, aditya_nandakumar, qcolombet, paquette, aemerson, dsanders
Reviewed By: aditya_nandakumar, paquette
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71448
and introducing new unittests/CodeGen/GlobalISel/LegalizerTest.cpp
relying on it to unit test the entire legalizer algorithm (including the
top-level main loop).
See also https://reviews.llvm.org/D71448
Summary:
This patch fixes a few issues when large arrays are allocated on the
stack. Currently, clang has inconsistent behaviour, for debug builds
there is an assertion failure when the array size on stack is around 2GB
but there is no assertion when the stack is around 8GB. For release
builds there is no assertion, the compilation succeeds but generates
incorrect code. The incorrect code generated is due to using
int/unsigned int instead of their 64-bit counterparts. This patch,
1) Removes the assertion in frame legality check.
2) Converts int/unsigned int in some places to the 64-bit variants. This
helps in generating correct code and removes the inconsistent behaviour.
3) Adds a test which runs without optimisations.
Reviewers: sdesmalen, efriedma, fhahn, aemerson
Reviewed By: efriedma
Subscribers: eli.friedman, fpetrogalli, kristof.beyls, hiraditya,
llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70496
Summary:
Previously, it was not possible to skip running the localizer pass
conditionally. This patch adds an input function to the pass which
decides if the pass should run on the given MachineFunction or not.
No test case as there is no upstream target needs this functionality.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71038
https://reviews.llvm.org/D70922
This adds a hook to allow targets to define exactly what extension
operation should be performed for widening constants. This handles cases
like widening i1 true which would end up becoming -1 which affects code
quality during combines.
Additionally, in order to stay consistent with how DAG is promoting
constants, we now signextend for byte sized types and zero extend
otherwise (by default). Targets can of course override this if
necessary.
Summary:
When combining COPY instructions, we were replacing the destination registers
with the source register without checking register constraints. This patch adds
a simple logic to check if the constraints match before replacing registers.
Reviewers: qcolombet, aditya_nandakumar, aemerson, paquette, dsanders, Petar.Avramovic
Reviewed By: aditya_nandakumar
Subscribers: rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70616
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.
AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
LLVM IR of 1-element vectors get lower into scalar in GISel. As a
result, shuffle vector may also produce a scalar.
This patch teaches the shuffle combiner how to deal with scalars when
they are in the destination type of a shuffle vector.
For now, we just support the easy case where this can be lowered to
a plain copy. For other cases, we leave the shuffle vector as is.
This type of IR are seen in O0 pipelines. E.g., as produced with
SingleSource/UnitTests/Vector/AArch64/aarch64_neon_intrinsics.c.
rdar://problem/57198904
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
Teach the combiner helper how to replace shuffle_vector of scalars
into build_vector.
I am not particularly happy about having to add this combine, but we
currently get those from <1 x iN> from the IR.
Bonus: This fixes an assert in the shuffle_vector combines since before
this patch, we were expecting vector types.
Summary:
A new function pass (Transforms/CFGuard/CFGuard.cpp) inserts CFGuard checks on
indirect function calls, using either the check mechanism (X86, ARM, AArch64) or
or the dispatch mechanism (X86-64). The check mechanism requires a new calling
convention for the supported targets. The dispatch mechanism adds the target as
an operand bundle, which is processed by SelectionDAG. Another pass
(CodeGen/CFGuardLongjmp.cpp) identifies and emits valid longjmp targets, as
required by /guard:cf. This feature is enabled using the `cfguard` CC1 option.
Reviewers: thakis, rnk, theraven, pcc
Subscribers: ychen, hans, metalcanine, dmajor, tomrittervg, alex, mehdi_amini, mgorny, javed.absar, kristof.beyls, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65761
Teach the CombinerHelper how to turn shuffle_vectors, that
concatenate vectors, into concat_vectors and add this combine
to the AArch64 pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D69149
llvm-svn: 375452
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
Summary:
Each generated helper can be configured to generate an option that disables
rules in that helper. This can be used to bisect rulesets.
The disable bits are stored in a SparseVector as this is very cheap for the
common case where nothing is disabled. It gets more expensive the more rules
are disabled but you're generally doing that for debug purposes where
performance is less of a concern.
Depends on D68426
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68438
llvm-svn: 375067
Teach the combiner helper how to flatten concat_vectors of build_vectors
into a build_vector.
Add this combine as part of AArch64 pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D69071
llvm-svn: 375066
Summary:
This is just moving the existing C++ code around and will be NFC w.r.t
AArch64. Renamed 'CombineBr' to something more descriptive
('ElideByByInvertingCond') at the same time.
The remaining combines in AArch64PreLegalizeCombiner require features that
aren't implemented at this point and will be hoisted as they are added.
Depends on D68424
Reviewers: bogner, volkan
Subscribers: kristof.beyls, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68426
llvm-svn: 375057
This patch kills off a significant user of the "IsIndirect" field of
DBG_VALUE machine insts. Brought up in in PR41675, IsIndirect is
techncally redundant as it can be expressed by the DIExpression of a
DBG_VALUE inst, and it isn't helpful to have two ways of expressing
things.
Rather than setting IsIndirect, have DBG_VALUE creators add an extra deref
to the insts DIExpression. There should now be no appearences of
IsIndirect=True from isel down to LiveDebugVariables / VirtRegRewriter,
which is ensured by an assertion in LDVImpl::handleDebugValue. This means
we also get to delete the IsIndirect handling in LiveDebugVariables. Tests
can be upgraded by for example swapping the following IsIndirect=True
DBG_VALUE:
DBG_VALUE $somereg, 0, !123, !DIExpression(DW_OP_foo)
With one where the indirection is in the DIExpression, by _appending_
a deref:
DBG_VALUE $somereg, $noreg, !123, !DIExpression(DW_OP_foo, DW_OP_deref)
Which both mean the same thing.
Most of the test changes in this patch are updates of that form; also some
changes in how the textual assembly printer handles these insts.
Differential Revision: https://reviews.llvm.org/D68945
llvm-svn: 374877
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
The CmpInst::getType() calls can be replaced by just using User::getType() that it was dyn_cast from, and we then need to assert that any default predicate cases came from the CmpInst.
llvm-svn: 374716
The exciting code is actually already enough to handle the splitting
of vector arguments but we were lacking a test case.
This commit adds a test case for vector argument lowering involving
splitting and enable the related support in call lowering.
llvm-svn: 374589
Teach buildMerge how to deal with scalar to vector kind of requests.
Prior to this patch, buildMerge would issue either a G_MERGE_VALUES
when all the vregs are scalars or a G_CONCAT_VECTORS when the destination
vreg is a vector.
G_CONCAT_VECTORS was actually not the proper instruction when the source
vregs were scalars and the compiler would assert that the sources must
be vectors. Instead we want is to issue a G_BUILD_VECTOR when we are
in this situation.
This patch fixes that.
llvm-svn: 374588
In GISel we have both G_CONSTANT and G_FCONSTANT, but because
in GISel we don't really have a concept of Float vs Int value
the only difference between the two is where the data originates
from.
What both G_CONSTANT and G_FCONSTANT return is just a bag of bits
with the constant representation in it.
By making getConstantVRegVal() return G_FCONSTANTs bit representation
as well we allow ConstantFold and other things to operate with
G_FCONSTANT.
Adding tests that show ConstantFolding to work on mixed G_CONSTANT
and G_FCONSTANT sources.
Differential Revision: https://reviews.llvm.org/D68739
llvm-svn: 374458
Allows targets to introduce regbankselectable
pseudo-instructions. Currently the closet feature to this is an
intrinsic. However this requires creating a public intrinsic
declaration. This litters the public intrinsic namespace with
operations we don't necessarily want to expose to IR producers, and
would rather leave as private to the backend.
Use a new instruction bit. A previous attempt tried to keep using enum
value ranges, but it turned into a mess.
llvm-svn: 373937
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
SelectionDAG has a bunch of machinery to defer this to selection time
for some reason. Just directly emit a copy during IRTranslator. The
x86 usage does somewhat questionably check hasFP, which could depend
on the whole function being at minimum translated.
This does lose the convergent bit if the callsite had it, which may be
a problem. We also lose that in general for intrinsics, which may also
be a problem.
llvm-svn: 373294
Summary:
It seems we missed that the target hook can't query the known-bits for the
inputs to a target instruction. Fix that oversight
Reviewers: aditya_nandakumar
Subscribers: rovka, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67380
llvm-svn: 373264
This adds support for lowering variadic musttail calls. To do this, we have
to...
- Detect a musttail call in a variadic function before attempting to lower the
call's formal arguments. This is done in the IRTranslator.
- Compute forwarded registers in `lowerFormalArguments`, and add copies for
those registers.
- Restore the forwarded registers in `lowerTailCall`.
Because there doesn't seem to be any nice way to wrap these up into the outgoing
argument handler, the restore code in `lowerTailCall` is done separately.
Also, irritatingly, you have to make sure that the registers don't overlap with
any passed parameters. Otherwise, the scheduler doesn't know what to do with the
extra copies and asserts.
Add call-translator-variadic-musttail.ll to test this. This is pretty much the
same as the X86 musttail-varargs.ll test. We didn't have as nice of a test to
base this off of, but the idea is the same.
Differential Revision: https://reviews.llvm.org/D68043
llvm-svn: 373226
We need to propagate this information from the IR in order to be able to safely
do tail call optimizations on the intrinsics during legalization. Assuming
it's safe to do tail call opt without checking for the marker isn't safe because
the mem libcall may use allocas from the caller.
This adds an extra immediate operand to the end of the intrinsics and fixes the
legalizer to handle it.
Differential Revision: https://reviews.llvm.org/D68151
llvm-svn: 373140
When checking for tail call eligibility, we should use the correct CCAssignFn
for each argument, rather than just checking if the caller/callee is varargs or
not.
This is important for tail call lowering with varargs. If we don't check it,
then basically any varargs callee with parameters cannot be tail called on
Darwin, for one thing. If the parameters are all guaranteed to be in registers,
this should be entirely safe.
On top of that, not checking for this could potentially make it so that we have
the wrong stack offsets when checking for tail call eligibility.
Also refactor some of the stuff for CCAssignFnForCall and pull it out into a
helper function.
Update call-translator-tail-call.ll to show that we can now correctly tail call
on Darwin. Also add two extra tail call checks. The first verifies that we still
respect the caller's stack size, and the second verifies that we still don't
tail call when a varargs function has a memory argument.
Differential Revision: https://reviews.llvm.org/D67939
llvm-svn: 372897
We were miscompiling switch value comparisons with the wrong signedness, which
shows up when we have things like switch case values with i1 types, which end up
being legalized incorrectly.
Fixes PR43383
llvm-svn: 372675
We currently always set the HasCalls on MFI during translation and legalization if
we're handling a call or legalizing to a libcall. However, if that call is later
optimized to a tail call then we don't need the flag. The flag being set to true
causes frame lowering to always save and restore FP/LR, which adds unnecessary code.
This change does the same thing as SelectionDAG and ports over some code that scans
instructions after selection, using TargetInstrInfo to determine if target opcodes
are known calls.
Code size geomean improvements on CTMark:
-O0 : 0.1%
-Os : 0.3%
Differential Revision: https://reviews.llvm.org/D67868
llvm-svn: 372443
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
r371901 was overeager and widenScalarDst() and the like in the legalizer
attempt to increment the insert point given in order to add new instructions
after the currently legalizing inst. In cases where the insertion point is not
exactly the current instruction, then callers need to de-compensate for the
behaviour by decrementing the insertion iterator before calling them. It's not
a nice state of affairs, for now just undo the problematic parts of the change.
llvm-svn: 372050
For some reason we sometimes insert new instructions one instruction before
the first non-PHI when legalizing. This can result in having non-PHI
instructions before PHIs, which mean that PHI elimination doesn't catch them.
Differential Revision: https://reviews.llvm.org/D67570
llvm-svn: 371901
Because memory intrinsics are handled differently than other calls, we need to
check them for tail call eligiblity in the legalizer. This allows us to still
inline them when it's beneficial to do so, but also tail call when possible.
This adds simple tail calling support for when the intrinsic is followed by a
return.
It ports the attribute checks from `TargetLowering::isInTailCallPosition` into
a similarly-named function in LegalizerHelper.cpp. The target-specific
`isUsedByReturnOnly` hook is not ported here.
Update tailcall-mem-intrinsics.ll to show that GlobalISel can now tail call
memory intrinsics.
Update legalize-memcpy-et-al.mir to have a case where we don't tail call.
Differential Revision: https://reviews.llvm.org/D67566
llvm-svn: 371893
Unlike SelectionDAG, treat this as a normally legalizable operation.
In SelectionDAG this is supposed to only ever formed if it's legal,
but I've found that to be restricting. For AMDGPU this is contextually
legal depending on whether denormal flushing is allowed in the use
function.
Technically we currently treat the denormal mode as a subtarget
feature, so custom lowering could be avoided. However I consider this
to be a defect, and this should be contextually dependent on the
controllable rounding mode of the parent function.
llvm-svn: 371800
This adds support for lowering sibling calls with outgoing arguments.
e.g
```
define void @foo(i32 %a)
```
Support is ported from AArch64ISelLowering's `isEligibleForTailCallOptimization`.
The only thing that is missing is a full port of
`TargetLowering::parametersInCSRMatch`. So, if we're using swiftself,
we'll never tail call.
- Rename `analyzeCallResult` to `analyzeArgInfo`, since the function is now used
for both outgoing and incoming arguments
- Teach `OutgoingArgHandler` about tail calls. Tail calls use frame indices for
stack arguments.
- Teach `lowerFormalArguments` to set the bytes in the caller's stack argument
area. This is used later to check if the tail call's parameters will fit on
the caller's stack.
- Add `areCalleeOutgoingArgsTailCallable` to perform the eligibility check on
the callee's outgoing arguments.
For testing:
- Update call-translator-tail-call to verify that we can now tail call with
outgoing arguments, use G_FRAME_INDEX for stack arguments, and respect the
size of the caller's stack
- Remove GISel-specific check lines from speculation-hardening.ll, since GISel
now tail calls like the other selectors
- Add a GISel test line to tailcall-string-rvo.ll since we can tail call in that
test now
- Add a GISel test line to tailcall_misched_graph.ll since we tail call there
now. Add specific check lines for GISel, since the debug output from the
machine-scheduler differs with GlobalISel. The dependency still holds, but
the output comes out in a different order.
Differential Revision: https://reviews.llvm.org/D67471
llvm-svn: 371780
First we were asserting that the ValNo of a VA was the wrong value. It doesn't actually
make a difference for us in CallLowering but fix that anyway to silence the assert.
The bigger issue was that after fixing the assert we were generating invalid MIR
because the merging/unmerging of values split across multiple registers wasn't
also implemented for memory locs. This happens when we run out of registers and
have to pass the split types like i128 -> i64 x 2 on the stack. This is do-able, but
for now just fall back.
llvm-svn: 371693
This fixes a crash in tail call translation caused by assume and lifetime_end
intrinsics.
It's possible to have instructions other than a return after a tail call which
will still have `Analysis::isInTailCallPosition` return true. (Namely,
lifetime_end and assume intrinsics.)
If we emit a tail call, we should stop translating instructions in the block.
Otherwise, we can end up emitting an extra return, or dead instructions in
general. This makes the verifier unhappy, and is generally unfortunate for
codegen.
This also removes the code from AArch64CallLowering that checks if we have a
tail call when lowering a return. This is covered by the new code now.
Also update call-translator-tail-call.ll to show that we now properly tail call
in the presence of lifetime_end and assume.
Differential Revision: https://reviews.llvm.org/D67415
llvm-svn: 371572
Add support for sibcalling calls whose calling convention differs from the
caller's.
- Port over `CCState::resultsCombatible` from CallingConvLower.cpp into
CallLowering. This is used to verify that the way the caller and callee CC
handle incoming arguments matches up.
- Add `CallLowering::analyzeCallResult`. This is basically a port of
`CCState::AnalyzeCallResult`, but using `ArgInfo` rather than `ISD::InputArg`.
- Add `AArch64CallLowering::doCallerAndCalleePassArgsTheSameWay`. This checks
that the calling conventions are compatible, and that the caller and callee
preserve the same registers.
For testing:
- Update call-translator-tail-call.ll to show that we can now handle this.
- Add a GISel line to tailcall-ccmismatch.ll to show that we will not tail call
when the regmasks don't line up.
Differential Revision: https://reviews.llvm.org/D67361
llvm-svn: 371570
Loosely based on DAGCombiner version, but this part is slightly simpler in
GlobalIsel because all address calculation is performed by G_GEP. That makes
the inc/dec distinction moot so there's just pre/post to think about.
No targets can handle it yet so testing is via a special flag that overrides
target hooks.
llvm-svn: 371384
Now that we look through copies, it's possible to visit registers that
have a register class constraint but not a type constraint. Avoid looking
through copies when this occurs as the SrcReg won't be able to determine
it's bit width or any known bits.
Along the same lines, if the initial query is on a register that doesn't
have a type constraint then the result is a default-constructed KnownBits,
that is, a 1-bit fully-unknown value.
llvm-svn: 371116
Recommit basic sibling call lowering (https://reviews.llvm.org/D67189)
The issue was that if you have a return type other than void, call lowering
will emit COPYs to get the return value after the call.
Disallow sibling calls other than ones that return void for now. Also
proactively disable swifterror tail calls for now, since there's a similar issue
with COPYs there.
Update call-translator-tail-call.ll to include test cases for each of these
things.
llvm-svn: 371114
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
........
This fails on EXPENSIVE_CHECKS builds due to a -verify-machineinstrs test failure in CodeGen/AArch64/dllimport.ll
llvm-svn: 371051
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
llvm-svn: 370996
Similar to the issue with G_ZEXT that was fixed earlier, this is a quick
to fall back if the source type is not exactly half of the dest type.
Fixes the clang-cmake-aarch64-lld bot build.
llvm-svn: 370847
Now that we have the infrastructure to support s128 types as parameters
we can expand these to libcalls.
Differential Revision: https://reviews.llvm.org/D66185
llvm-svn: 370823
On AArch64, s128 types have to be split into s64 GPRs when passed as arguments.
This change adds the generic support in call lowering for dealing with multiple
registers, for incoming and outgoing args.
Support for splitting for return types not yet implemented.
Differential Revision: https://reviews.llvm.org/D66180
llvm-svn: 370822
Add lower for G_FPTOUI. Algorithm is similar to the SDAG version
in TargetLowering::expandFP_TO_UINT.
Lower G_FPTOUI for MIPS32.
Differential Revision: https://reviews.llvm.org/D66929
llvm-svn: 370431
AMDGPU uses this for some addressing mode selection patterns. The
analysis run itself doesn't do anything so it seems easier to just
always require this than adding a way to opt in.
llvm-svn: 370388
These are currently translated as normal functions calls in AArch64.
Until we have proper tail call lowering, we shouldn't translate these.
Differential Revision: https://reviews.llvm.org/D66842
llvm-svn: 370225
This change moves the actual stack pointer manipulation into the legalizer,
available to targets via lower(). The codegen is slightly different because
we're using explicit masks instead of G_PTRMASK, and using G_SUB rather than
adding a negative amount via G_GEP.
Differential Revision: https://reviews.llvm.org/D66678
llvm-svn: 370104
Main difference is in the way Hi for Long shift (HiL) is made.
G_LSHR fills HiL with zeros, while G_ASHR fills HiL with sign bit value.
Differential Revision: https://reviews.llvm.org/D66589
llvm-svn: 370064
Fix typos. Use Hi and Lo prefixes for Or instead of LHS and RHS
to match names of surrounding variables.
Differential Revision: https://reviews.llvm.org/D66587
llvm-svn: 370062
Summary:
Currently, Legalizer aborts if it’s unable to legalize artifacts. However, it’s
possible to combine them after processing the rest of the instruction because
the legalization is likely to generate more artifacts that allow ArtifactCombiner
to combine away them.
Instead, move illegal artifacts to another list called RetryList and wait until all of the
instruction in InstList are legalized. After that, check if there is any new artifacts and
try to combine them again if that’s the case. If not, abort. The idea is similar to D59339,
but the approach is a bit different.
This patch fixes the issue described above, but the legalizer still may be unable to handle
some cases depending on when to legalize artifacts. So, in the long run, we probably need
a different legalization strategy that handles this dependency in a better way.
Reviewers: dsanders, aditya_nandakumar, qcolombet, arsenm, aemerson, paquette
Reviewed By: dsanders
Subscribers: jvesely, wdng, nhaehnle, rovka, javed.absar, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65894
llvm-svn: 369805
The x86 tests are now broken (in paticular add-scalar.ll now hits the
DAG fallback) due to not handling G_UADDO. The DAG x86 backend has a
custom lowering for this, so that will need to be implemented.
llvm-svn: 369673
This is necessary for handling <3 x s16> on AMDGPU, assuming this
should be handled as 2 separate legalization actions. The alternative
would be for fewerElementsVector to handle 3->2.
llvm-svn: 369547
Add NarrowScalar for G_TRUNC when NarrowTy is half the size of source.
NarrowScalar G_TRUNC to s32 for MIPS32.
Differential Revision: https://reviews.llvm.org/D66202
llvm-svn: 369509
https://reviews.llvm.org/D66077
The value passed into dbg.value may relate to multiple registers,
each of which need a DBG_VALUE.
This fix calls MIRBuilder.buildDirectDbgValue for each register.
Without this, IR passed in from flang-compiler/flang may fail an
assertion in getOrCreateVReg.
Patch by : peterwaller-arm.
llvm-svn: 369403
Again, it's weird that these are allowed. Since lowering support was added in
r368709 we started crashing on compiling the neon intrinsics test in the test
suite. This fixes the lowering to fold the 1 elt src/mask case into copies.
llvm-svn: 369135
Summary:
This patch adds G_GEP to `shouldCSEOpc` so that it can be CSEd. It also refactors
`translateGetElementPtr` by replacing `createGenericVirtualRegister` calls with types.
Reviewers: aditya_nandakumar, arsenm, dsanders, paquette, aemerson
Reviewed By: aditya_nandakumar
Subscribers: wdng, rovka, javed.absar, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66316
llvm-svn: 369070
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Currently shufflemasks get emitted as any other constant, and you end
up with a bunch of virtual registers of G_CONSTANT with a
G_BUILD_VECTOR. The AArch64 selector then asserts on anything that
doesn't fit this pattern. This isn't an ideal representation, and
should avoid legalization and have fewer opportunities for a
representational error.
Rather than invent a new shuffle mask operand type, similar to what
ShuffleVectorSDNode does, just track the original IR Constant mask
operand. I don't completely like the idea of adding another link to
the IR, but MIR is already quite dependent on IR constants already,
and this will allow sharing the shuffle mask utility functions with
the IR.
llvm-svn: 368704
Currently we can't keep any state in the selector object that we get from
subtarget. As a result we have to plumb through all our variables through
multiple functions. This change makes it non-const and adds a virtual init()
method to allow further state to be captured for each target.
AArch64 makes use of this in this patch to cache a call to hasFnAttribute()
which is expensive to call, and is used on each selection of G_BRCOND.
Differential Revision: https://reviews.llvm.org/D65984
llvm-svn: 368652
https://reviews.llvm.org/D66039
We were using getIndexSize instead of getIndexSizeInBits().
Added test case for G_PTRTOINT and G_INTTOPTR.
llvm-svn: 368618
Summary:
Targets often have instructions that can sign-extend certain cases faster
than the equivalent shift-left/arithmetic-shift-right. Such cases can be
identified by matching a shift-left/shift-right pair but there are some
issues with this in the context of combines. For example, suppose you can
sign-extend 8-bit up to 32-bit with a target extend instruction.
%1:_(s32) = G_SHL %0:_(s32), i32 24 # (I've inlined the G_CONSTANT for brevity)
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_ASHR %2:_(s32), i32 1
would reasonably combine to:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 25
which no longer matches the special case. If your shifts and extend are
equal cost, this would break even as a pair of shifts but if your shift is
more expensive than the extend then it's cheaper as:
%2:_(s32) = G_SEXT_INREG %0:_(s32), i32 8
%3:_(s32) = G_ASHR %2:_(s32), i32 1
It's possible to match the shift-pair in ISel and emit an extend and ashr.
However, this is far from the only way to break this shift pair and make
it hard to match the extends. Another example is that with the right
known-zeros, this:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 24
%3:_(s32) = G_MUL %2:_(s32), i32 2
can become:
%1:_(s32) = G_SHL %0:_(s32), i32 24
%2:_(s32) = G_ASHR %1:_(s32), i32 23
All upstream targets have been configured to lower it to the current
G_SHL,G_ASHR pair but will likely want to make it legal in some cases to
handle their faster cases.
To follow-up: Provide a way to legalize based on the constant. At the
moment, I'm thinking that the best way to achieve this is to provide the
MI in LegalityQuery but that opens the door to breaking core principles
of the legalizer (legality is not context sensitive). That said, it's
worth noting that looking at other instructions and acting on that
information doesn't violate this principle in itself. It's only a
violation if, at the end of legalization, a pass that checks legality
without being able to see the context would say an instruction might not be
legal. That's a fairly subtle distinction so to give a concrete example,
saying %2 in:
%1 = G_CONSTANT 16
%2 = G_SEXT_INREG %0, %1
is legal is in violation of that principle if the legality of %2 depends
on %1 being constant and/or being 16. However, legalizing to either:
%2 = G_SEXT_INREG %0, 16
or:
%1 = G_CONSTANT 16
%2:_(s32) = G_SHL %0, %1
%3:_(s32) = G_ASHR %2, %1
depending on whether %1 is constant and 16 does not violate that principle
since both outputs are genuinely legal.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, rovka, kristof.beyls, javed.absar, hiraditya, jrtc27, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61289
llvm-svn: 368487
I've now needed to add an extra parameter to this call twice recently. Not only
is the signature getting extremely unwieldy, but just updating all of the
callsites and implementations is a pain. Putting the parameters in a struct
sidesteps both issues.
llvm-svn: 368408
https://reviews.llvm.org/D65698
This adds a KnownBits analysis pass for GISel. This was done as a
pass (compared to static functions) so that we can add other features
such as caching queries(within a pass and across passes) in the future.
This patch only adds the basic pass boiler plate, and implements a lazy
non caching knownbits implementation (ported from SelectionDAG). I've
also hooked up the AArch64PreLegalizerCombiner pass to use this - there
should be no compile time regression as the analysis is lazy.
llvm-svn: 368065
FastISel already does this since the initial arm64 port was upstreamed, so
it seems there are no issues with doing this at -O0 for very small memcpys.
Gives a 0.2% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D65758
llvm-svn: 367919
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
This is an old commit that exposed a bug in the GISel importer, which caused
non-truncating stores to be selected for truncating store patterns. Now that's
been fixed in r367737 this can go back in.
llvm-svn: 367739
AMDGPU sometimes has legal s16 and <2 x s16> operations, but all
registers are really 32-bit. An unmerge destination really should ben
widened to a 32-bit register. If widening a scalarizing vector with a
target size that matches the vector size, bitcast to integer and
extract the relevant bits with shifts.
I'm not sure if this is the right place for this. This could arguably
be part of widenScalar for the result. I also have a growing feeling
that we're missing a bitcast legalize action.
llvm-svn: 367604
Summary:
This will make it possible to improve IPRA by taking into account
register usage in indirect calls.
NFC yet; this is just laying the groundwork to start building
up patches to take advantage of the information for improved register
allocation.
Reviewers: aditya_nandakumar, volkan, qcolombet, arsenm, rovka, aemerson, paquette
Subscribers: sdardis, wdng, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65488
llvm-svn: 367476
This introduces a new family of combiner helper routines that re-use the
target specific cost model from SelectionDAG, and generate inline implementations
of the memcpy family of intrinsics.
The combines are only enabled at optimization levels higher than -O0, and give
very substantial performance improvements.
Differential Revision: https://reviews.llvm.org/D65167
llvm-svn: 366951
r366317 added a legalization for s128 G_ICMP narrow scalar which tried to hard
code the result type of the new legalized G_SELECT. Change this to instead use
type of the original G_ICMP result and allow the target to legalize it if necessary
later.
llvm-svn: 366943
I plan on adding memcpy optimizations in the GlobalISel pipeline, but we can't
do that unless we delay lowering to actual function calls. This patch changes
the translator to generate G_INTRINSIC_W_SIDE_EFFECTS for these functions, and
then have each target specify that using the new custom legalizer for intrinsics
hook that they want it expanded it a libcall.
Differential Revision: https://reviews.llvm.org/D64895
llvm-svn: 366516
Extract the sources to the GCD of the original size and target size,
padding with implicit_def as necessary.
Also fix the case where the requested source type is wider than the
original result type. This was ignoring the type, and just using the
destination. Do the operation in the requested type and truncate back.
llvm-svn: 366367
Use an anyext to the requested type for the leftover operand to
produce a slightly wider type, and then truncate the final merge.
I have another implementation almost ready which handles arbitrary
widens, but I think it produces worse code in this example (which I
think is 90% due to not folding redundant copies or folding out
implicit_def users), so I wanted to add this as a baseline first.
llvm-svn: 366366
Add narrowScalar to half of original size for G_ICMP.
ClampScalar G_ICMP's operands 2 and 3 to to s32.
Select G_ICMP for pointers for MIPS32. Pointer compare is same
as for integers, it is enough to declare them as legal type.
Differential Revision: https://reviews.llvm.org/D64856
llvm-svn: 366317
AMDGPU needs to allocate special argument registers separately from
the user function argument list, so needs direct control over the
CCState.
The ArgLocs argument is only really necessary because CCState doesn't
allow access to it.
llvm-svn: 366279
Since we have distinct types for pointers and scalars, G_INTTOPTRs can sometimes
obstruct attempts to find constant source values. These usually come about when
try to do some kind of null pointer check. Teaching getConstantVRegValWithLookThrough
about this operation allows the CBZ/CBNZ optimization to catch more cases.
This change also improves the case where we can't find a constant source at all.
Previously we would emit a cmp, cset and tbnz for that. Now we try to just emit
a cmp and conditional branch, saving an instruction.
The cumulative code size improvement of this change plus D64354 is 5.5% geomean
on arm64 CTMark -O0.
Differential Revision: https://reviews.llvm.org/D64377
llvm-svn: 365690
In SelectionDAG AMDGPU treated these as legal, but this was mostly
because the bitcasts required for FP types were painful. Theoretically
the bitpattern should eventually match to bfi, so don't bother trying
to get the patterns to import.
llvm-svn: 365583
If we have an icmp->brcond->br sequence where the brcond just branches to the
next block jumping over the br, while the br takes the false edge, then we can
modify the conditional branch to jump to the br's target while inverting the
condition of the incoming icmp. This means we can eliminate the br as an
unconditional branch to the fallthrough block.
Differential Revision: https://reviews.llvm.org/D64354
llvm-svn: 365510
Select gprb or fprb when def/use register operand of G_PHI is
used/defined by either:
copy to/from physical register or
instruction with only one mapping available for that use/def operand.
Integer s64 phi is handled with narrowScalar when mapping is applied,
produced artifacts are combined away. Manually set gprb to all register
operands of instructions created during narrowScalar.
Differential Revision: https://reviews.llvm.org/D64351
llvm-svn: 365494
If the requested source type an be used as a merge source type, create
a merge of merges. This avoids creating large, illegal extensions and
bit-ops directly to the result type.
llvm-svn: 364841
https://reviews.llvm.org/D31359
Add a hook "legalizeInstrinsic" to allow backends to override this
and custom lower/legalize intrinsics.
llvm-svn: 364821
Fix stack-use-after-scope errors from r364512. One instance was already
fixed in r364611 - this patch simplifies that fix and addresses one more
instance of similar code.
Discussed in: https://reviews.llvm.org/D63905
llvm-svn: 364778
The new switch lowering code that tries to generate jump tables and range checks
were tested at -O0 on arm64, but on -O3 the generic switch lowering code goes to
town on trying to generate optimized lowerings, e.g. multiple jump tables, range
checks etc. This exposed bugs in the way PHI nodes are handled because the CFG
looks even stranger after all of this is done.
llvm-svn: 364613
This patch intends to fix ASAN stack-use-after-scope error.
This is at least a short-term fix to unbreak LLVM's mainline.
Differential Revision: https://reviews.llvm.org/D63905
llvm-svn: 364611
Remove the last use of packRegs from IRTranslator and delete
pack/unpackRegs. This introduces a fallback to DAGISel for intrinsics
with aggregate arguments, since we don't have a testcase for them so
it's hard to tell how we'd want to handle them.
Discussed in https://reviews.llvm.org/D63551
llvm-svn: 364514
Change the interface of CallLowering::lowerCall to accept several
virtual registers for each argument, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63551
llvm-svn: 364512
Change the interface of CallLowering::lowerCall to accept several
virtual registers for the call result, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63550
llvm-svn: 364511
Change the interface of CallLowering::lowerFormalArguments to accept
several virtual registers for each formal argument, instead of just one.
This is a follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660. lowerCall
will be refactored in the same way in follow-up patches.
With this change, we forward the virtual registers generated for
aggregates to CallLowering. Therefore, the target can decide itself
whether it wants to handle them as separate pieces or use one big
register. We also copy the pack/unpackRegs helpers to CallLowering to
facilitate this.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
AArch64 seems to have had a bug when lowering e.g. [1 x i8*], which was
put into a s64 instead of a p0. Added a test-case which illustrates the
problem more clearly (it crashes without this patch) and fixed the
existing test-case to expect p0.
AMDGPU has been updated to unpack into the virtual registers for
kernels. I think the other code paths fall back for aggregates, so this
should be NFC.
Mips doesn't support aggregates yet, so it's also NFC.
x86 seems to have code for dealing with aggregates, but I couldn't find
the tests for it, so I just added a fallback to DAGISel if we get more
than one virtual register for an argument.
Differential Revision: https://reviews.llvm.org/D63549
llvm-svn: 364510
Allow CallLowering::ArgInfo to contain more than one virtual register.
This is useful when passes split aggregates into several virtual
registers, but need to also provide information about the original type
to the call lowering. Used in follow-up patches.
Differential Revision: https://reviews.llvm.org/D63548
llvm-svn: 364509
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
GlobalISel/IRTranslator.cpp now references SelectionDAG/FunctionLoweringInfo.cpp.
This fixes a link error in -DBUILD_SHARED_LIBS=on builds:
ld.lld: error: undefined symbol: llvm::FunctionLoweringInfo::clear()
>>> referenced by IRTranslator.cpp:2198 (../lib/CodeGen/GlobalISel/IRTranslator.cpp:2198)
>>> lib/CodeGen/GlobalISel/CMakeFiles/LLVMGlobalISel.dir/IRTranslator.cpp.o:(llvm::IRTranslator::finalizeFunction())
llvm-svn: 364124
This change makes use of the newly refactored SwitchLoweringUtils code from
SelectionDAG to in order to generate jump tables and range checks where appropriate.
Much of this code is ported from SDAG with some modifications. We generate
G_JUMP_TABLE and G_BRJT instructions when JT opportunities are found. This means
that targets which previously relied on the naive one MBB per case stmt
translation will now start falling back until they add support for the new opcodes.
For range checks, we don't generate any previously unused operations. This
just recognizes contiguous ranges of case values and generates a single block per
range. Single case value blocks are just a special case of ranges so we get that
support almost for free.
There are still some optimizations missing that I haven't ported over, and
bit-tests are also unimplemented. This patch series is already complex enough.
Actual arm64 support for selection of jump tables is coming in a later patch.
Differential Revision: https://reviews.llvm.org/D63169
llvm-svn: 364085
G_INTTOPTR can prevent the localizer from moving G_CONSTANTs, but since it's
essentially a side effect free cast instruction we can remat both instructions.
This patch changes the localizer to enable localization of the chains by
iterating over the entry block instructions in reverse order. That way, uses will
localized first, and then the defs are free to be localized as well.
This also changes the previous SmallPtrSet of localized instructions to use a
SetVector instead. We're dealing with pointers and need deterministic iteration
order.
Overall, this change improves ARM64 -O0 CTMark code size by around 0.7% geomean.
Differential Revision: https://reviews.llvm.org/D63630
llvm-svn: 364001
Summary:
All the GlobalISel passes are initialized when the target calls
initializeGlobalISel(), so we don't need to call the initializers
from the pass constructors.
Reviewers: qcolombet, t.p.northover, paquette, dsanders, aemerson, aditya_nandakumar
Reviewed By: aemerson
Subscribers: rovka, kristof.beyls, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63235
llvm-svn: 363642
This was ignoring the flag on fneg, and using the source instruction's
flags. Also fixes tests missing from r358702.
Note the expansion itself isn't correct without nnan, but that should
be fixed separately.
llvm-svn: 363637
Inter-block localization is the same as what currently happens, except now it
only runs on the entry block because that's where the problematic constants with
long live ranges come from.
The second phase is a new intra-block localization phase which attempts to
re-sink the already localized instructions further right before one of the
multiple uses.
One additional change is to also localize G_GLOBAL_VALUE as they're constants
too. However, on some targets like arm64 it takes multiple instructions to
materialize the value, so some additional heuristics with a TTI hook have been
introduced attempt to prevent code size regressions when localizing these.
Overall, these changes improve CTMark code size on arm64 by 1.2%.
Full code size results:
Program baseline new diff
------------------------------------------------------------------------------
test-suite...-typeset/consumer-typeset.test 1249984 1217216 -2.6%
test-suite...:: CTMark/ClamAV/clamscan.test 1264928 1232152 -2.6%
test-suite :: CTMark/SPASS/SPASS.test 1394092 1361316 -2.4%
test-suite...Mark/mafft/pairlocalalign.test 731320 714928 -2.2%
test-suite :: CTMark/lencod/lencod.test 1340592 1324200 -1.2%
test-suite :: CTMark/kimwitu++/kc.test 3853512 3820420 -0.9%
test-suite :: CTMark/Bullet/bullet.test 3406036 3389652 -0.5%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8017000 8016992 -0.0%
test-suite...TMark/7zip/7zip-benchmark.test 2856588 2856588 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 765704 765704 0.0%
Geomean difference -1.2%
Differential Revision: https://reviews.llvm.org/D63303
llvm-svn: 363632
Summary: This case is related to D63405 in that we need to be propagating FMF on negates.
Reviewers: volkan, spatel, arsenm
Reviewed By: arsenm
Subscribers: wdng, javed.absar
Differential Revision: https://reviews.llvm.org/D63458
llvm-svn: 363631
Summary:
Change the way we deal with iterator invalidation in the extload combines as it
was still possible to neglect to visit a use. Even worse, it happened in the
in-tree test cases and the checks weren't good enough to detect it.
We now take a cheap copy of the use list before iterating over it. This
prevents iterator invalidation from occurring and has the nice side effect
of making the existing schedule-for-erase/schedule-for-insert mechanism
moot.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, javed.absar, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61813
llvm-svn: 363616
A target intrinsic may be defined as possibly reading memory, but the
call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic assumption
of the intrinsic definition, so the chain should still be used.
I fixed the same bug in SelectionDAG in r287593.
llvm-svn: 363580
This is a branch opcode that takes a jump table pointer, jump table index and an
index into the table to do an indirect branch.
We pass both the table pointer and JTI to allow targets like ARM64 to more
easily use the existing jump table compression optimization without having to
walk up the block to find a paired G_JUMP_TABLE.
Differential Revision: https://reviews.llvm.org/D63159
llvm-svn: 363434
Avoid producing illegal register bank copies for reg_sequence and
phi. The default implementation assumes it is possible to pick any
operand's bank and use that for the result, introducing a copy for
operands with a different bank. This does not check for illegal
copies. It is not legal to introduce a VGPR->SGPR copy, so any VGPR
operand requires the result to be a VGPR.
The changes in getInstrMappingImpl aren't strictly necessary, since
AMDGPU now just bypasses this for reg_sequence/phi. This could be
replaced with an assert in case other targets run into this. It is
currently responsible for producing the error for unsatisfiable
copies, but this will be better served with a verifier check.
For phis, for now assume any undetermined operands must be
VGPRs. Eventually, this needs to be able to defer mapping these
operations. This also does not yet have a way to check for whether the
block is in a divergent region.
llvm-svn: 363410
Avoid a check for valid and a set of redundant asserts. The place
InstructionMapping is constructed asserts all of the default fields
are passed anyway for an invalid mapping, so don't overcomplicate
this.
llvm-svn: 363391
Constants, including G_GLOBAL_VALUE, are all emitted into the entry block which
lets us use the vreg def assuming it dominates all other users. However, it can
cause jumpy debug behaviour since the DebugLoc attached to these MIs are from
a user instruction that could be in a different block.
Fixes PR40887.
Differential Revision: https://reviews.llvm.org/D63286
llvm-svn: 363331
This opcode generates a pointer to the address of the jump table
specified by the source operand, which is a jump table index.
It will be used in conjunction with an upcoming G_BRJT opcode to support
jump table codegen with GlobalISel.
Differential Revision: https://reviews.llvm.org/D63111
llvm-svn: 363096
If the source is undef, then just don't do anything.
This matches SelectionDAG's behaviour in SelectionDAG.cpp.
Also add a test showing that we do the right thing here.
(irtranslator-memfunc-undef.ll)
Differential Revision: https://reviews.llvm.org/D63095
llvm-svn: 362989
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362012
avoid static check fail
RegClassOrBank is an object of RegClassOrRegBank, which is defined as
using llvm::RegClassOrRegBank = typedef PointerUnion<const
TargetRegisterClass *, const RegisterBank *>
so control flow can not get here. Use ""llvm_unreachable" here to avoid
"null pointer" confusion.
Patch by Shengchen Kan (skan)
Differential Revision: https://reviews.llvm.org/D62006
Signed-off-by: pengfei <pengfei.wang@intel.com>
llvm-svn: 361912
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
llvm-svn: 361608
This is ported from the custom AMDGPU DAG implementation. I think this
is a better default expansion than what the DAG currently uses, at
least if the target has CTLZ.
This implements the signed version in terms of the unsigned
conversion, which is implemented with bit operations. SelectionDAG has
several other implementations that should eventually be ported
depending on what instructions are legal.
llvm-svn: 361081
When breaking up loads and stores of aggregates, the IRTranslator uses
LLT::scalar(64) for the index type of the G_GEP instructions that
compute the addresses. This is unnecessarily large for 32-bit targets.
Use the int ptr type provided by the DataLayout instead.
Note that we're already doing the right thing when translating
getelementptr instructions from the IR. This is just an oversight when
generating new ones while translating loads/stores.
Both x86 and AArch64 already have tests confirming that the old
behaviour is preserved for 64-bit targets.
Differential Revision: https://reviews.llvm.org/D61852
llvm-svn: 360656
We use to incorrectly use the store size instead of the alloc size when
creating the stack slot for allocas.
On aarch64 this can be demonstrated by allocating weirdly sized types.
For instance, in the added test case, we use an alloca for i19. We used
to allocate a slot of size 24-bit (19 rounded up to the next byte),
whereas we really want to use a full 32-bit slot for this type.
llvm-svn: 359856
* LegalizeAction should be printed by name rather than number
* Newly created instructions are incomplete at the point the observer first sees
them. They are therefore recorded in a small vector and printed just before
the legalizer moves on to another instruction. By this point, the instruction
must be complete.
llvm-svn: 359481
When constrainRegClass is called if the constraining happens on a use the COPY
needs to be inserted before the instruction that contains the MachineOperand,
but if we are constraining a definition it actually needs to be added
after the instruction. In addition, the COPY needs to have its operands
flipped (in the use case we are copying from the old unconstrained register
to the new constrained register, while in the definition case we are copying
from the new constrained register that the instruction defines to the old
unconstrained register).
llvm-svn: 359282
Add legalizer support for G_FNEARBYINT. It's the same as G_FCEIL etc.
Since the importer allows us to automatically select this after legalization,
also add tests for selection etc. Also update arm64-vfloatintrinsics.ll.
llvm-svn: 359204
Translate llvm.nearbyint into G_FNEARBYINT as a simple intrinsic. Update
arm64-irtranslator.ll.
Differential Revision: https://reviews.llvm.org/D60922
llvm-svn: 359203
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
Same patch as G_FCEIL etc.
Add the missing switch case in widenScalar, add G_INTRINSIC_TRUNC to the correct
rule in AArch64LegalizerInfo.cpp, and add a test.
llvm-svn: 359021
Exactly the same as G_FCEIL, G_FABS, etc.
Add tests for the fp16/nofp16 behaviour, update arm64-vfloatintrinsics, etc.
Differential Revision: https://reviews.llvm.org/D60895
llvm-svn: 358799
This instruction is legalized in the same way as G_FSIN, G_FCOS, G_FLOG10, etc.
Update legalize-pow.mir and arm64-vfloatintrinsics.ll to reflect the change.
Differential Revision: https://reviews.llvm.org/D60218
llvm-svn: 358764
Legalize things like i24 load/store by splitting them into smaller power of 2 operations.
This matches how SelectionDAG handles these operations.
Differential Revision: https://reviews.llvm.org/D59971
llvm-svn: 358613
Since non-pow-2 types are going to get split up into multiple loads anyway,
don't do the [SZ]EXTLOAD combine for those and save us trouble later in
legalization.
llvm-svn: 358458
Other opcodes shouldn't be CSE'd until we can be sure debug info quality won't
be degraded.
This change also improves the IRTranslator so that in most places, but not all,
it creates constants using the MIRBuilder directly instead of first creating a
new destination vreg and then creating a constant. By doing this, the
buildConstant() method can just return the vreg of an existing G_CONSTANT
instead of having to create a COPY from it.
I measured a 0.2% improvement in compile time and a 0.9% improvement in code
size at -O0 ARM64.
Compile time:
Program base cse diff
test-suite...ark/tramp3d-v4/tramp3d-v4.test 9.04 9.12 0.8%
test-suite...Mark/mafft/pairlocalalign.test 2.68 2.66 -0.7%
test-suite...-typeset/consumer-typeset.test 5.53 5.51 -0.4%
test-suite :: CTMark/lencod/lencod.test 5.30 5.28 -0.3%
test-suite :: CTMark/Bullet/bullet.test 25.82 25.76 -0.2%
test-suite...:: CTMark/ClamAV/clamscan.test 6.92 6.90 -0.2%
test-suite...TMark/7zip/7zip-benchmark.test 34.24 34.17 -0.2%
test-suite :: CTMark/SPASS/SPASS.test 6.25 6.24 -0.1%
test-suite...:: CTMark/sqlite3/sqlite3.test 1.66 1.66 -0.1%
test-suite :: CTMark/kimwitu++/kc.test 13.61 13.60 -0.0%
Geomean difference -0.2%
Code size:
Program base cse diff
test-suite...-typeset/consumer-typeset.test 1315632 1266480 -3.7%
test-suite...:: CTMark/ClamAV/clamscan.test 1313892 1297508 -1.2%
test-suite :: CTMark/lencod/lencod.test 1439504 1423112 -1.1%
test-suite...TMark/7zip/7zip-benchmark.test 2936980 2904172 -1.1%
test-suite :: CTMark/Bullet/bullet.test 3478276 3445460 -0.9%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8082868 8033492 -0.6%
test-suite :: CTMark/kimwitu++/kc.test 3870380 3853972 -0.4%
test-suite :: CTMark/SPASS/SPASS.test 1434904 1434896 -0.0%
test-suite...Mark/mafft/pairlocalalign.test 764528 764528 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 782092 782092 0.0%
Geomean difference -0.9%
Differential Revision: https://reviews.llvm.org/D60580
llvm-svn: 358369
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
This enables the simple copy combine that already exists in the CombinerHelper.
However, it exposed a bug in the GISelChangeObserver where it wouldn't clear a
set of MIs to process, and so would end up causing a crash when deleted MIs were
being added to the combiner worklist again.
Differential Revision: https://reviews.llvm.org/D60579
llvm-svn: 358318
This crash was introduced in r358032 as we try to construct an EVT from an MVT
in order to find the register type for the calling conv. Fall back instead of
trying to do this with an invalid MVT coming from i256.
llvm-svn: 358314
Call lowering should use this directly instead of going through the
EVT version, but more work is needed to deal with this (mostly the
passing of the IR type pointer instead of the relevant properties in
ArgInfo).
llvm-svn: 358111
required to be passed as different register types. E.g. <2 x i16> may need to
be passed as a larger <2 x i32> type, so formal arg lowering needs to be able
truncate it back. Likewise, when dealing with returns of these types, they need
to be widened in the appropriate way back.
Differential Revision: https://reviews.llvm.org/D60425
llvm-svn: 358032
Create method `optForNone()` testing for the function level equivalent of
`-O0` and refactor appropriately.
Differential revision: https://reviews.llvm.org/D59852
llvm-svn: 357638
Same as G_EXP. Add a test, and update legalizer-info-validation.mir and
f16-instructions.ll.
Differential Revision: https://reviews.llvm.org/D60165
llvm-svn: 357605
The artifact combiners push instructions which have been marked for deletion
onto an list for the legalizer to deal with on return. However, for trunc(ext)
combines the combiner routine recursively calls itself. When it does this the
dead instructions list may not be empty, and the other combiners don't expect
to be dealing with essentially invalid MIR (multiple vreg defs etc).
This change fixes it by ensuring that the dead instructions are processed on
entry into tryCombineInstruction.
As a result, this fix exposed a few places in tests where G_TRUNC instructions
were not being deleted even though they were dead.
Differential Revision: https://reviews.llvm.org/D59892
llvm-svn: 357101
The AArch64 test was broken since the result register already had a
set register class, so this test was a no-op. The mapping verify call
would fail because the result size is not the same as the inputs like
in a copy or phi.
The AMDGPU testcases are half broken and introduce illegal VGPR->SGPR
copies which need much more work to handle correctly (same for phis),
but add them as a baseline.
llvm-svn: 356713
After review comments, it was preferred to not teach MachineIRBuilder about
non-generic instructions beyond using buildInstr().
For AArch64 I've changed the buildCopy() calls to buildInstr() + a
separate addReg() call.
This also relaxes the MachineIRBuilder's COPY checking more because it may
not always have a SrcOp given to it.
llvm-svn: 356396
This relaxes some asserts about sizes, and adds an optional subreg parameter
to buildCopy().
Also update AArch64 instruction selector to use this in places where we
previously used MachineInstrBuilder manually.
Differential Revision: https://reviews.llvm.org/D59434
llvm-svn: 356304
This is consistent with what SelectionDAG does and is much easier to
work with than the extract sequence with an artificial wide register.
For the AMDGPU control flow intrinsics, this was producing an s128 for
the i64, i1 tuple return. Any legalization that should apply to a real
s128 value would badly obscure the direct values that need to be seen.
llvm-svn: 356147
getConstantVRegVal used to only look for G_CONSTANT when looking at
unboxing the value of a vreg. However, constants are sometimes not
directly used and are hidden behind trunc, s|zext or copy chain of
computation.
In particular this may be introduced by the legalization process that
doesn't want to simplify these patterns because it can lead to infine
loop when legalizing a constant.
To circumvent that problem, add a new variant of getConstantVRegVal,
named getConstantVRegValWithLookThrough, that allow to look through
extensions.
Differential Revision: https://reviews.llvm.org/D59227
llvm-svn: 356116
Overloaded intrinsics aren't necessarily safe for instruction selection. One
such intrinsic is aarch64.neon.addp.*.
This is a temporary workaround to ensure that we always fall back on that
intrinsic. Eventually this will be replaced with a proper solution.
https://bugs.llvm.org/show_bug.cgi?id=40968
Differential Revision: https://reviews.llvm.org/D59062
llvm-svn: 355865
The control flow here cannot ever use the uninitialized value, but it's
too hard for the compiler to figure that out. Clang warns:
llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2600:28: error: variable 'CarrySum' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized]
for (unsigned i = 2; i < Factors.size(); ++i)
^~~~~~~~~~~~~~~~~~
llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2604:26: note: uninitialized use occurs here
CarrySumPrevDstIdx = CarrySum;
^~~~~~~~
llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2600:28: note: remove the condition if it is always true
for (unsigned i = 2; i < Factors.size(); ++i)
^~~~~~~~~~~~~~~~~~
llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2583:22: note: initialize the variable 'CarrySum' to silence this warning
unsigned CarrySum;
^
= 0
llvm-svn: 355818
Narrow Scalar G_MUL for MIPS32.
Revisit NarrowScalar implementation in LegalizerHelper.
Introduce new helper function multiplyRegisters.
It performs generic multiplication of values held in multiple registers.
Generated instructions use only types NarrowTy and i1.
Destination can be same or two times size of the source.
Differential Revision: https://reviews.llvm.org/D58824
llvm-svn: 355814
Try to use concat_vectors. Also remove unnecessary assert on
pointers. Fixes asserting for <4 x s16> operations and 64-bit pointers
for AMDGPU.
llvm-svn: 354828
For AMDGPU, if an operand requires an SGPR but is only available as a
VGPR, a loop needs to be introduced to execute the instruction with
each unique combination of values across all lanes. The rest of the
instructions in the block will be moved to a new block following the
loop. Check if the next instruction's parent changed, and update the
iterators and insertion block if this happened.
Tests will be included in a future patch.
llvm-svn: 354591
Legalize/select llvm.ctlz.*
Add select-ctlz to show that we actually select them. Update arm64-clrsb.ll and
arm64-vclz.ll to show that we perform valid transformations in optimized builds,
and document where GISel can improve.
Differential Revision: https://reviews.llvm.org/D58155
llvm-svn: 354299
https://reviews.llvm.org/D58073
Speed up insertion during the initial populating phase into the
GISelWorkList by deferring repeatedly resizing the DenseMap.
This results in ~10% improvement in the combiner passes, and
~3% speedup in the Legalizer.
reviewed by: aemerson.
llvm-svn: 354093
Select G_BR and G_BRCOND for MIPS32.
Unconditional branch G_BR does not have register operand,
for that reason we only add tests.
Since conditional branch G_BRCOND compares register to zero on MIPS32,
explicit extension must be performed on i1 condition in order to set
high bits to appropriate value.
Differential Revision: https://reviews.llvm.org/D58182
llvm-svn: 354022
Summary:
The declarative tablegen definitions split rules into match and apply steps.
Prepare for that by doing the same in the C++ implementations. This aids
some of the migration effort while the tablegen version is incomplete.
Reviewers: bogner, volkan, aditya_nandakumar, paquette, aemerson
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, Petar.Avramovic, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58150
llvm-svn: 353996
Instead of only having this code work for unary intrinsics, have it work for
an arbitrary number of parameters.
Factor out the cases that fall under this (fma, pow).
This makes it a bit easier to add more intrinsics which don't require any
special work.
Differential Revision: https://reviews.llvm.org/D58079
llvm-svn: 353863
This teaches the IRTranslator to emit G_BSWAP when it runs into
Intrinsic::bswap. This allows us to select G_BSWAP for non-vector types in
AArch64.
Add a select-bswap.mir test, and add global isel checks to a couple existing
tests in test/CodeGen/AArch64.
This doesn't handle every bswap case, since some of these rely on known bits
stuff. This just lets us handle the naive case.
Differential Revision: https://reviews.llvm.org/D58081
llvm-svn: 353861
This teaches the legalizer about G_FFLOOR, and lets us select G_FFLOOR in
AArch64.
It updates the existing floating point tests, and adds a select-floor.mir test.
Differential Revision: https://reviews.llvm.org/D57486
llvm-svn: 353722
After the changes introduced in r353586, this instruction doesn't cause any
issues for any backend.
Original review: https://reviews.llvm.org/D57485
llvm-svn: 353720
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Make behavior of G_LOAD in widenScalar same as for G_ZEXTLOAD and
G_SEXTLOAD. That is perform widenScalarDst to size given by the target
and avoid additional checks in common code. Targets can reorder or add
additional rules in LegalizeRuleSet for the opcode to achieve desired
behavior.
Select extending load that does not have specified type of extension
into zero extending load.
Select truncating store that stores number of bytes indicated by size
in MachineMemoperand.
Differential Revision: https://reviews.llvm.org/D57454
llvm-svn: 353520
This is pretty much directly ported from SelectionDAG. Doesn't include
the shift by non-constant but known bits version, since there isn't a
globalisel version of computeKnownBits yet.
This shows a disadvantage of targets not specifically which type
should be used for the shift amount. If type 0 is legalized before
type 1, the operations on the shift amount type use the wider type
(which are also less likely to legalize). This can be avoided by
targets specifying legalization actions on type 1 earlier than for
type 0.
llvm-svn: 353455
Introduce a new function which handles instructions with multiple type
indices, but have the same number of vector elements.
Also legalize v2s16 shifts when applicable.
llvm-svn: 353432
There was a lot of repeated code wrt unary math intrinsics in
translateKnownIntrinsic. This factors out the repeated MIRBuilder code into
two functions: translateSimpleUnaryIntrinsic and getSimpleUnaryIntrinsicOpcode.
This simplifies adding simple unary intrinsics, since after this, all you have
to do is add the mapping to SimpleUnaryIntrinsicOpcodes.
Differential Revision: https://reviews.llvm.org/D57774
llvm-svn: 353316
The fewerElementsVectors implementation for load/stores
handles the scalar reduction case just as well, so drop
the redundant code in narrowScalar. This also introduces
support for narrowing irregular size breakdowns for
scalars.
llvm-svn: 353125
Don't handle vector conditions.
I think this can be merged in the future with
fewerElementsVectorSelect, although this becomes slightly tricky with
a vector condition.
llvm-svn: 353122
Try to use the underlying source registers.
This enables legalization in more cases where some irregular
operations are widened and others narrowed.
This seems to make the test_combines_2 AArch64 test worse, since the
MERGE_VALUES has multiple uses. Since this should be required for
legalization, a hasOneUse check is probably inappropriate (or maybe
should only be used if the merge is legal?).
llvm-svn: 353121
This fixes two problems with CSE done in buildConstant. First, this
would hit an assert when used with a vector result type. Solve this by
allowing CSE on the vector elements, but not on the result vector for
now.
Second, this was also performing the CSE based on the input
ConstantInt pointer. The underlying buildConstant could potentially
convert the constant depending on the result type, giving in a
different ConstantInt*. Stop allowing the APInt and ConstantInt forms
from automatically casting to the result type to avoid any similar
problems in the future.
llvm-svn: 353077
This reverts commit 8bbd570fd5205a04d88d2e5513a6e4adbd028039.
Apparently adding ffloor breaks AMDGPU somehow, so I need to back this out
while I look into it.
llvm-svn: 353064
For the scalar case only.
Also move the similar G_MERGE_VALUES handling to a separate function
and cleanup to make them look more similar.
llvm-svn: 352979
Also fix an alignment bug getMachineMemOperand. If the
tracked value is null, the offset isn't tracked so the
base alignment needs to be reduced.
llvm-svn: 352716
This teaches the legalizer to handle G_FEXP in AArch64. As a result, it also
allows us to select G_FEXP.
It...
- Updates the legalizer-info tests
- Adds a test for legalizing exp
- Updates the existing fp tests to show that we can now select G_FEXP
https://reviews.llvm.org/D57483
llvm-svn: 352692
This teaches GlobalISel to emit a RTLib call for @llvm.log2 when it encounters
it.
It updates the existing floating point tests to show that we don't fall back on
the intrinsic, and select the correct instructions. It also adds a legalizer
test for G_FLOG2.
https://reviews.llvm.org/D57357
llvm-svn: 352673
This teaches the legalizer about G_FSQRT in AArch64. Also adds a legalizer
test for G_FSQRT, a selection test for it, and updates existing floating point
tests.
https://reviews.llvm.org/D57361
llvm-svn: 352671
I've repeatedly encountered bugs resulting from custom legalize
mutations returning nonsense legalize results, such as increasing the
number of elements for FewerElements. Add an assert function to make
sure the type to mutate to is consistent with the legalize action.
llvm-svn: 352636
This was ignoring the memory size, and producing multiple loads/stores
if the operand size was different from the memory size.
I assume this is the intent of not having an explicit G_ANYEXTLOAD
(although I think that would probably be better).
llvm-svn: 352523
This adds support for legalizing G_FLOG into a RTLib call.
It adds a legalizer test, and updates the existing floating point tests.
https://reviews.llvm.org/D57347
llvm-svn: 352429
This adds instruction selection support for @llvm.log10 in AArch64. It teaches
GISel to lower it to a library call, updates the relevant tests, and adds a
legalizer test for log10.
https://reviews.llvm.org/D57341
llvm-svn: 352418
This adds ISel support for lifetime markers in opt levels above O0.
It also updates the arm64-irtranslator test, and updates some AArch64 tests that
use them for added coverage.
It also adds a testcase taken from the X86 codegen tests which verified a bug
caused by lifetime markers + stack colouring in the past. This is intended to
make sure that GISel doesn't re-introduce the bug.
(This is basically a straight copy from what SelectionDAG does in
SelectionDAGBuilder.cpp)
https://reviews.llvm.org/D57187
llvm-svn: 352410
This contains all of the legalizer changes from D57197 necessary to select
G_FCOS and G_FSIN. It also updates several existing IR tests in
test/CodeGen/AArch64 that verify that we correctly lower the G_FCOS and G_FSIN
instructions.
https://reviews.llvm.org/D57197
3/3
llvm-svn: 352402
Lower G_USUBO and G_USUBE. Add narrowScalar for G_SUB.
Legalize and select G_SUB for MIPS 32.
Differential Revision: https://reviews.llvm.org/D53416
llvm-svn: 352351
This fixes loads like 's1 = load %p (load 1 from %p)' being combined with an
extend into an illegal 's8 = g_extload %p (load 1 from %p)' which doesn't do any
extension, by avoiding touching those < s8 size loads.
This bug was uncovered by a verifier update r351584, which I reverted it to keep
the bots green.
llvm-svn: 352311
https://reviews.llvm.org/D57178
Now add a hook in TargetPassConfig to query if CSE needs to be
enabled. By default this hook returns false only for O0 opt level but
this can be overridden by the target.
As a consequence of the default of enabled for non O0, a few tests
needed to be updated to not use CSE (by passing in -O0) to the run
line.
reviewed by: arsenm
llvm-svn: 352126
This patch adds support for vector @llvm.ceil intrinsics when full 16 bit
floating point support isn't available.
To do this, this patch...
- Implements basic isel for G_UNMERGE_VALUES
- Teaches the legalizer about 16 bit floats
- Teaches AArch64RegisterBankInfo to respect floating point registers on
G_BUILD_VECTOR and G_UNMERGE_VALUES
- Teaches selectCopy about 16-bit floating point vectors
It also adds
- A legalizer test for the 16-bit vector ceil which verifies that we create a
G_UNMERGE_VALUES and G_BUILD_VECTOR when full fp16 isn't supported
- An instruction selection test which makes sure we lower to G_FCEIL when
full fp16 is supported
- A test for selecting G_UNMERGE_VALUES
And also updates arm64-vfloatintrinsics.ll to show that the new ceiling types
work as expected.
https://reviews.llvm.org/D56682
llvm-svn: 352113
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
llvm-svn: 351882
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
If a copy was needed to handle the condition of brcond, it was being
inserted before the defining instruction. Add tests for iterator edge
cases.
I find the existing code here suspect for the case where it's looking
for terminators that modify the register. It's going to insert a copy
in the middle of the terminators, which isn't allowed (it might be
necessary to have a COPY_terminator if anybody actually needs this).
Also legalize brcond for AMDGPU.
llvm-svn: 350595
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
This adds support for widening G_FCEIL in LegalizerHelper and
AArch64LegalizerInfo. More specifically, it teaches the AArch64 legalizer to
widen G_FCEIL from a 16-bit float to a 32-bit float when the subtarget doesn't
support full FP 16.
This also updates AArch64/f16-instructions.ll to show that we perform the
correct transformation.
llvm-svn: 349927
This adds a G_FCEIL generic instruction and uses it in AArch64. This adds
selection for floating point ceil where it has a supported, dedicated
instruction. Other cases aren't handled here.
It updates the relevant gisel tests and adds a select-ceil test. It also adds a
check to arm64-vcvt.ll which ensures that we don't fall back when we run into
one of the relevant cases.
llvm-svn: 349664
Summary: This the initial code change to facilitate managing FMF flags from Instructions to MI wrt Intrinsics in Global Isel. Eventually the GlobalObserver interface will be added as well, where FMF additions can be tracked for the builder and CSE.
Reviewers: aditya_nandakumar, bogner
Reviewed By: bogner
Subscribers: rovka, kristof.beyls, javed.absar
Differential Revision: https://reviews.llvm.org/D55668
llvm-svn: 349514
Add support for s64 libcalls for G_SDIV, G_UDIV, G_SREM and G_UREM
and use integer type of correct size when creating arguments for
CLI.lowerCall.
Select G_SDIV, G_UDIV, G_SREM and G_UREM for types s8, s16, s32 and s64
on MIPS32.
Differential Revision: https://reviews.llvm.org/D55651
llvm-svn: 349499
Add narrowScalar for G_AND and G_XOR.
Legalize G_AND G_OR and G_XOR for types other then s32
with clampScalar on MIPS32.
Differential Revision: https://reviews.llvm.org/D55362
llvm-svn: 349475
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
https://reviews.llvm.org/D55516
Add the ability to pass in flags to buildInstr calls. Currently no
validation is performed but that can be easily performed based on the
opcode (if necessary).
Reviewed by: paquette.
llvm-svn: 348893
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
Record the stack protector index in MachineFrameInfo when translating
Intrinsic::stackprotector similarly as is done by SelectionDAG when
processing the same intrinsic.
Setting this index allows the Prologue/Epilogue Insertion to recognize
that the stack protection is enabled. The pass can then make sure that
the stack protector comes before local variables on the stack and
assigns potentially vulnerable objects first so they are close to the
stack protector slot.
Differential Revision: https://reviews.llvm.org/D55418
llvm-svn: 348761
These opcodes are intended to subsume some of the capability of G_MERGE_VALUES,
as it was too powerful and thus complex to add deal with throughout the GISel
pipeline.
G_BUILD_VECTOR creates a vector value from a sequence of uniformly typed
scalar values. G_BUILD_VECTOR_TRUNC is a special opcode for handling scalar
operands which are larger than the destination vector element type, and
therefore does an implicit truncate.
G_CONCAT_VECTOR creates a vector by concatenating smaller, uniformly typed,
vectors together.
These will be used in a subsequent commit. This commit just adds the initial
infrastructure.
Differential Revision: https://reviews.llvm.org/D53594
llvm-svn: 348430
Daniel Sanders