I think every target will want to remove these in the same way. Rather than
making them all implement the same code, let's just put this in
InstructionSelect.
Differential Revision: https://reviews.llvm.org/D95652
Remove the call to setFlags in favour of creating the instruction with
the correct flags in the first place, so we don't have to explicitly
notify the observer.
Differential Revision: https://reviews.llvm.org/D95681
This adds generic regbankselect support for G_ASSERT_ZEXT.
It inherits whatever register bank the source was given, always, on all targets.
I think that at the point where we run into these, the source register bank
should be decided.
This also adds some AArch64-specific code which makes sure we can handle
G_ASSERT_ZEXT when deciding on register banks for G_STORE, G_PHI, ... etc.
Differential Revision: https://reviews.llvm.org/D95649
It's the same as the ZEXT/TRUNC case, except SrcBitWidth is given by the
immediate operand.
Update KnownBitsTest.cpp and a MIR test for a concrete example.
Differential Revision: https://reviews.llvm.org/D95566
Treat hint instructions like G_ASSERT_ZEXT like COPY instructions in helpers
which walk through copies.
This ensures that instructions like G_ASSERT_ZEXT won't impact any optimizations
that rely on these helpers.
Differential Revision: https://reviews.llvm.org/D95577
These are widened to a wider UADDE/USUBE, with the overflow value
unused, and with the same synthesis of a new overflow value as for the
O operations.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D95326
This adds a generic opcode which communicates that a type has already been
zero-extended from a narrower type.
This is intended to be similar to AssertZext in SelectionDAG.
For example,
```
%x_was_extended:_(s64) = G_ASSERT_ZEXT %x, 16
```
Signifies that the top 48 bits of %x are known to be 0.
This is useful in cases like this:
```
define i1 @zeroext_param(i8 zeroext %x) {
%cmp = icmp ult i8 %x, -20
ret i1 %cmp
}
```
In AArch64, `%x` must use a 32-bit register, which is then truncated to a 8-bit
value.
If we know that `%x` is already zero-ed out in the relevant high bits, we can
avoid the truncate.
Currently, in GISel, this looks like this:
```
_zeroext_param:
and w8, w0, #0xff ; We don't actually need this!
cmp w8, #236
cset w0, lo
ret
```
While SDAG does not produce the truncation, since it knows that it's
unnecessary:
```
_zeroext_param:
cmp w0, #236
cset w0, lo
ret
```
This patch
- Adds G_ASSERT_ZEXT
- Adds MIRBuilder support for it
- Adds MachineVerifier support for it
- Documents it
It also puts G_ASSERT_ZEXT into its own class of "hint instruction." (There
should be a G_ASSERT_SEXT in the future, maybe a G_ASSERT_ALIGN as well.)
This allows us to skip over hints in the legalizer etc. These can then later
be selected like COPY instructions or removed.
Differential Revision: https://reviews.llvm.org/D95564
Just use the existing `Known.sextInReg` implementation.
- Update KnownBitsTest.cpp.
- Update combine-redundant-and.mir for a more concrete example.
Differential Revision: https://reviews.llvm.org/D95484
The current algorithm just tries to localize defs as far as they can go, and in
the case of G_PHI operands, it clones the def into the predecessor block for
each incoming edge. When multiple edges have the same register value, this can
cause unnecessary code bloat, and inhibit later optimizations.
This change checks if a given phi operand is unique in the phi, if not the
def of that register is not localized to the predecessor.
Differential Revision: https://reviews.llvm.org/D95406
Implement widening for G_SADDO and G_SSUBO.
Add legalize-add/sub tests for narrow overflowing add/sub on AArch64.
Differential Revision: https://reviews.llvm.org/D95034
The widenScalar implementation for signed and unsigned overflowing
operations were very similar: both are checked by truncating the result
and then re-sign/zero-extending it and checking that it matches the
computed operation.
Using a truncate + zero-extend for the unsigned case instead of manually
producing the AND instruction like before leads to an extra copy
instruction during legalization, but this should be harmless.
Differential Revision: https://reviews.llvm.org/D95035
Implement widening for G_SADDO and G_SSUBO. Previously it was only
implemented for G_UADDO and G_USUBO. Also add legalize-add/sub tests for
narrow overflowing add/sub on AArch64.
Differential Revision: https://reviews.llvm.org/D95034
Make this look more like the DAG handling and move to common code.
I also noticed AArch64 seems to not be properly adding the
physreg:virtreg mapping to the function live ins.
If constants are hidden behind G_ANYEXT we can treat them same way as G_SEXT.
For that purpose we extend getConstantVRegValWithLookThrough with option
to handle G_ANYEXT same way as G_SEXT.
Differential Revision: https://reviews.llvm.org/D92219
When constraining an operand register using constrainOperandRegClass(),
the function may emit a COPY in case the provided register class does
not match the current operand register class. However, the operand
itself is not updated to make use of the COPY, thereby resulting in
incorrect code. This patch fixes that bug by updating the machine
operand accordingly.
Reviewed By: dsanders
Differential Revision: https://reviews.llvm.org/D91244
This is a restricted version of the combine in `DAGCombiner::MatchLoadCombine`.
(See D27861)
This tries to recognize patterns like below (assuming a little-endian target):
```
s8* x = ...
s32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
->
s32 val = *((i32)a)
s8* x = ...
s32 val = a[3] | (a[2] << 8) | (a[1] << 16) | (a[0] << 24)
->
s32 val = BSWAP(*((s32)a))
```
(This patch also handles the big-endian target case as well, in which the first
example above has a BSWAP, and the second example above does not.)
To recognize the pattern, this searches from the last G_OR in the expression
tree.
E.g.
```
Reg Reg
\ /
OR_1 Reg
\ /
OR_2
\ Reg
.. /
Root
```
Each non-OR register in the tree is put in a list. Each register in the list is
then checked to see if it's an appropriate load + shift logic.
If every register is a load + potentially a shift, the combine checks if those
loads + shifts, when OR'd together, are equivalent to a wide load (possibly with
a BSWAP.)
To simplify things, this patch
(1) Only handles G_ZEXTLOADs (which appear to be the common case)
(2) Only works in a single MachineBasicBlock
(3) Only handles G_SHL as the bit twiddling to stick the small load into a
specific location
An IR example of this is here: https://godbolt.org/z/4sP9Pj (lifted from
test/CodeGen/AArch64/load-combine.ll)
At -Os on AArch64, this is a 0.5% code size improvement for CTMark/sqlite3,
and a 0.4% improvement for CTMark/7zip-benchmark.
Also fix a bug in `isPredecessor` which caused it to fail whenever `DefMI` was
the first instruction in the block.
Differential Revision: https://reviews.llvm.org/D94350
This fixes double printing of insertion debug messages in the
legalizer.
Try to cleanup usage of observers. Currently the use of observers is
pretty hard to follow and it's not clear what is responsible for
them. Observers are referenced in 3 places:
1. In the MachineFunction
2. In the MachineIRBuilder
3. In the LegalizerHelper
The observers in the MachineFunction and MachineIRBuilder are both
called only on insertions, and are redundant with each other. The
source of the double printing was the same observer was added to both
the MachineFunction, and the MachineIRBuilder. One of these references
needs to be removed. Arguably observers in general should be fully
removed from one or the other, but it may be useful to have a local
observer in the MachineIRBuilder that is not added to the function's
observers. Alternatively, the wrapper observer could manage a local
observer in one place.
The LegalizerHelper only ever calls the observer on changing/changed
instructions, and never insertions. Logically these are two different
types of observers, for changes and for insertions.
Additionally, some places used the GISelObserverWrapper when they only
needed a single observer they could use directly.
Setting the observer in the LegalizerHelper constructor is not
flexible enough if the LegalizerHelper is constructed anywhere outside
the one used by the legalizer. AMDGPU calls the LegalizerHelper in
RegBankSelect, and needs to use a local observer to apply the regbank
to newly created instructions. Currently it accomplishes this by
constructing a local MachineIRBuilder. I'm trying to move the
MachineIRBuilder to be owned/maintained by the RegBankSelect pass
itself, but the locally constructed LegalizerHelper would reset the
observer.
Mips also has a special case use of the LegalizationArtifactCombiner
in applyMappingImpl; I think we do need to run the artifact combiner
during RegBankSelect, but in a more consistent way outside of
applyMappingImpl.
If the return values can't be lowered to registers
SelectionDAG performs the sret demotion. This patch
contains the basic implementation for the same in
the GlobalISel pipeline.
Furthermore, targets should bring relevant changes
during lowerFormalArguments, lowerReturn and
lowerCall to make use of this feature.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D92953
Recently a few patches are made to move towards using select i1 instead of and/or i1 to represent "a && b"/"a || b" in C/C++.
"a && b" in C/C++ does not evaluate b if a is false whereas 'and a, b' in IR evaluates b and uses its result regardless of the result of a.
This is problematic because it can cause miscompilation if b was an erroneous operation (https://llvm.org/pr48353).
In C/C++, the result is simply false because b is not evaluated, but in IR the result is poison.
The discussion at D93065 has more context about this.
This patch makes two branch-splitting optimizations (one in SelectionDAGBuilder, one in CodeGenPrepare) recognize
select form of and/or as well using m_LogicalAnd/Or.
Since it is CodeGen, I think this is semantically ok (at least as safe as what codegen already did).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93853
Returning int64_t was arbitrarily limiting for wide integer types, and
the functions should handle the full generality of the IR.
Also changes the full form which returns the originally defined
vreg. Add another wrapper for the common case of just immediately
converting to int64_t (arguably this would be useful for the full
return value case as well).
One possible issue with this change is some of the existing uses did
break without conversion to getConstantVRegSExtVal, and it's possible
some without adequate test coverage are now broken.
This migrates all LLVM (except Kaleidoscope and
CodeGen/StackProtector.cpp) DebugLoc::get to DILocation::get.
The CodeGen/StackProtector.cpp usage may have a nullptr Scope
and can trigger an assertion failure, so I don't migrate it.
Reviewed By: #debug-info, dblaikie
Differential Revision: https://reviews.llvm.org/D93087
The lowering of vector selects needs to first splat the scalar mask into a vector
first.
This was causing a crash when building oggenc in the test suite.
Differential Revision: https://reviews.llvm.org/D91655
It's fairly common to need matchers for a specific constant value, or for
common idioms like finding a negated register.
Add
- `m_SpecificICst`, which returns true when matching a specific value..
- `m_ZeroInt`, which returns true when an integer 0 is matched.
- `m_Neg`, which returns when a register is negated.
Also update a few places which use idioms related to the new matchers.
Differential Revision: https://reviews.llvm.org/D91397
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
We have a frequent pattern where we're merging two KnownBits to get the common/shared bits, and I just fell for the gotcha where I tried to use the & operator to merge them........
We can use KnownBitsAnalysis to cover cases when mask is not trivial. It can
also help with cases when mask is not constant but can still be folded into
one. Since 'and' is comutative we should treat both operands as possible
replacements.
Differential Revision: https://reviews.llvm.org/D90674
This sequence of instructions can be simplified if they are single use and
some operands are constants. Additional combines may be applied afterwards.
Differential Revision: https://reviews.llvm.org/D90223
Sequence of same shift instructions with constant operands can be combined into
a single shift instruction.
Differential Revision: https://reviews.llvm.org/D90217
Convert GISelKnownBits.computeKnownBitsImpl shift handling to use the common KnownBits implementations, which makes use of the known leading/trailing bits for shifted values in cases where we don't know the shift amount value, as detailed in https://blog.regehr.org/archives/1709
Differential Revision: https://reviews.llvm.org/D90527
https://reviews.llvm.org/D88060
This adds the following combines
1) build_vector formation from insert_vec_elts
2) insert_vec_elts (build_vector) -> build_vector
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
In order to prevent the ExpandReductions pass from expanding some intrinsics
before they get to codegen, I had to add a -disable-expand-reductions flag
for testing purposes.
Differential Revision: https://reviews.llvm.org/D89028
https://reviews.llvm.org/D88865
This adds a single combine for GlobalISel to fold:
ptradd (inttoptr C1) C2
Into:
C1 + C2
Additionally, a small test for AArch64 is added.
Patch by pnappa.
When the first operand is a null pointer we can avoid making a G_PTR_ADD and
make a G_INTTOPTR with the offset operand.
This helps us avoid making add with 0 later on for targets such as AMDGPU.
Differential Revision: https://reviews.llvm.org/D87140
If the known shift amount is bigger than or equal to the bitwidth of the type of the value to be shifted,
the result is target dependent, so don't try to infer any bits.
This fixes a crash we've seen in one of our internal test suites.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D89232
The IRTranslator depends on the branch probability info pass when the
optimization level is different than None and it depends all the time on
the StackProtector pass.
We have to explicitly call out pass dependencies otherwise the pass manager
may not be able to schedule the IRTranslator.
Before this patch, we were lucky because previous passes depend on the branch
probability info pass (like the Global Variable Optimization) and the stack
protector pass is initialized in initializeCodeGen.
However, if the target has a custom pipeline without any passes like Global
Variable Optimization, the pipeline creation will fail, at least because of
the branch probability info pass dependency (it is unlikely that
initializeCodeGen is not called).
This patch adds the missing dependencies to the IRTranslator.
Differential Revision: https://reviews.llvm.org/D89063
If a CSEMIRBuilder query hits the instruction at the current insert point,
move insert point ahead one so that subsequent uses of the builder don't end up with
uses before defs.
This fix also shows that AMDGPU was also affected by this bug often, but got away
with it because it was using a G_IMPLICIT_DEF before the use.
Differential Revision: https://reviews.llvm.org/D88605
Before, for each original argument i, ValNo was set to i + PartIdx, but
ValNo is intended to reflect the index of the value before splitting.
Hence, ValNo should always be set to i and not consider the PartIdx.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86511
During lowering of G_UMULO and friends, the previous code moved the builder's
insertion point to be after the legalizing instruction. When that happened, if
there happened to be a "G_CONSTANT i32 0" immediately after, the CSEMIRBuilder
would try to find that constant during the buildConstant(zero) call, and since
it dominates itself would return the iterator unchanged, even though the def
of the constant was *after* the current insertion point. This resulted in the
compare being generated *before* the constant which it was using.
There's no need to modify the insertion point before building the mul-hi or
constant. Delaying moving the insert point ensures those are built/CSEd before
the G_ICMP is built.
Fixes PR47679
Differential Revision: https://reviews.llvm.org/D88514
Fix creation of illegal unmerge when widen was requested to a type which
is not a multiple of the destination type. E.g. when trying to widen
an s48 unmerge to s64 the existing code would create an illegal unmerge
from s64 to s48.
Instead, create further unmerges to a GCD type, then use this to remerge
these intermediate results to the actual destinations.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D88422
When we see this:
```
%and = G_AND %x, %y
%xor = G_XOR %and, %y
```
Produce this:
```
%not = G_XOR %x, -1
%new_and = G_AND %not, %y
```
as long as we are guaranteed to eliminate the original G_AND.
Also matches all commuted forms. E.g.
```
%and = G_AND %y, %x
%xor = G_XOR %y, %and
```
will be matched as well.
Differential Revision: https://reviews.llvm.org/D88104
Previously, if a floating-point type was legal, but FNEG wasn't legal,
we would use FSUB. Instead, we should use integer ops, to preserve the
semantics. (Alternatively, there's a compiler-rt call we could use, but
there isn't much reason to use that.)
It turns out we actually are still using this obscure codepath in a few
cases: on some targets, we have "legal" floating-point types that don't
actually support any floating-point operations. In particular, ARM and
AArch64 are using this path.
The implementation for SelectionDAG is pretty simple because we can
reuse the infrastructure from FCOPYSIGN.
See also 9a3dc3e, the corresponding change to type legalization.
Also includes a "bonus" change to STRICT_FSUB legalization, so we can
lower a STRICT_FSUB to a float libcall.
Includes the changes to both LegalizeDAG and GlobalISel so we don't have
inconsistent results in the future.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46792 .
Differential Revision: https://reviews.llvm.org/D84287
The shift amount type does not necessarily match the result type. This
was inserting a trunc from s32 to s32, which asserted. Just preserve
the original shift amount type which can be legalized later.
For <8 x s32> = fptrunc <8 x s64> the fewerElementsVector action tries to break
down the source vector into the final source vectors of <2 x s64> using unmerge.
This fixes a crash due to using the wrong number of elements for the breakdown
type.
Also add some legalizer tests for explicitly G_FPTRUNC which we didn't have.
Differential Revision: https://reviews.llvm.org/D87814
https://reviews.llvm.org/D86393
Patch adds five new `GICombinerRules`, one for each of the following unary
FP instrs: `G_FNEG`, `G_FABS`, `G_FPTRUNC`, `G_FSQRT`, and `G_FLOG2`. The
combine rules perform the FP operation on the constant operand and replace
the original instr with the result. Patch additionally adds new combiner
tests for the AArch64 target to test these new combiner rules.
test/CodeGen/AArch64/GlobalISel/combine-trunc.mir was failing
due to the different order for evaluating function arguments.
This patch updates the related code to fix the issue.
https://reviews.llvm.org/D87668
Patch adds two new GICombinerRules, one for G_MUL(X, 1) and another for G_MUL(X, -1).
G_MUL(X, 1) is an identity combine, and G_MUL(X, -1) gets replaced with G_SUB(0, X).
Patch additionally adds new combiner tests for the AArch64 target to test these
new combiner rules, as well as updates AMDGPU GISel tests.
Patch by mkitzan
Update TargetMachine.Options with function attributes before we start
to generate MIR instructions. This allows access to correct function
attributes via TargetMachine.Options (it used to access attributes of
the function that was translated first).
This affects some existing tests with "no-nans-fp-math" attribute.
Follow-up on D87456.
Differential Revision: https://reviews.llvm.org/D87511
Add a combiner helper that replaces G_UNMERGE where all the destination lanes
are dead except the first one with a G_TRUNC.
Differential Revision: https://reviews.llvm.org/D87174
Add a combiner helper that replaces G_UNMERGE of big constants into direct
use of smaller constants.
Differential Revision: https://reviews.llvm.org/D87166
https://reviews.llvm.org/D87554
Patch adds one new GICombinerRule for G_FABS. The combine rule folds G_FABS(G_FABS(X)) to G_FABS(X).
Patch additionally adds new combiner tests for the AArch64 target to test this new combiner rule.
Patch by mkitzan.
Add the matching and applying function to the combiner helper for
G_UNMERGE_VALUES(G_MERGE_VALUES).
This combine also supports any merge-like input nodes, like G_BUILD_VECTORS
and is robust against bitcasts in between int unmerge and merge nodes.
When the input type of the merge node and the output type of the unmerge
node are not the same, but the sizes are, the combine still applies but
creates bitcasts between the sources and the destinations instead of
reusing the destinations directly.
Long term, the artifact combiner should probably reuse that helper, but
as of today, it doesn't use any outside helper, so I kept it this way.
Differential Revision: https://reviews.llvm.org/D87117
Check for NoNaNsFPMath function attribute in isKnownNeverSNaN.
Function attributes are in held in 'TargetMachine.Options'.
Among other things, this allows selection of some patterns imported
in D87351 since G_FCANONICALIZE is not generated when isKnownNeverSNaN
returns true in lowerFMinNumMaxNum.
However we notice some incorrect results since function attributes are
not correctly written in TargetMachine.Options when next function is
processed. Take a look at @v_test_no_global_nnans_med3_f32_pat0_srcmod0,
it has "no-nans-fp-math"="false" but TargetMachine.Options still has it
set to true since first function in test file had this attribute set to
true. This will be fixed in D87511.
Differential Revision: https://reviews.llvm.org/D87456
Halide users reported this here: https://llvm.org/pr46176
I reported the issue to MSVC here:
https://developercommunity.visualstudio.com/content/problem/1179643/msvc-copies-overaligned-non-trivially-copyable-par.html
This codepath is apparently not covered by LLVM's unit tests, so I added
coverage in a unit test.
If we want to support this configuration going forward, it means that is
in general not safe to pass a SmallVector<T, N> by value if alignof(T)
is greater than 4. This doesn't appear to come up often because passing
a SmallVector by value is inefficient and not idiomatic: it copies the
inline storage. In this case, the SmallVector<LLT,4> is captured by
value by a lambda, and the lambda is passed by value into std::function,
and that's how we hit the bug.
Differential Revision: https://reviews.llvm.org/D87475
We weren't using this before, so none of the MachineFunction CFG edges had the
branch probability information added. As a result, block placement later in the
pipeline was flying blind.
This is enabled only with optimizations enabled like SelectionDAG.
Differential Revision: https://reviews.llvm.org/D86824
This is a port of the functionality from SelectionDAG, which tries to find
a tree of conditions from compares that are then combined using OR or AND,
before using that result as the input to a branch. Instead of naively
lowering the code as is, this change converts that into a sequence of
conditional branches on the sub-expressions of the tree.
Like SelectionDAG, we re-use the case block codegen functionality from
the switch lowering utils, which causes us to generate some different code.
The result of which I've tried to mitigate in earlier combine patches.
Differential Revision: https://reviews.llvm.org/D86665
This combine previously tried to take sequences like:
%cond = G_ICMP pred, a, b
G_BRCOND %cond, %truebb
G_BR %falsebb
%truebb:
...
%falsebb:
...
and by inverting the compare predicate and swapping branch targets, delete the
G_BR and instead have a single conditional branch to the falsebb. Since in an
earlier patch we have a combine to fold not(icmp) into just an inverted icmp,
we don't need this combine to do as much. This patch instead generalizes the
combine by just looking for:
G_BRCOND %cond, %truebb
G_BR %falsebb
%truebb:
...
%falsebb:
...
and then inverting the condition using a not (xor). The xor can be folded away
in a separate combine. This change also lets us avoid some optimization code
in the IRTranslator.
I also think that deleting G_BRs in the combiner is unnecessary. That's
something that targets can decide to do at selection time and could simplify
generic code in future.
Differential Revision: https://reviews.llvm.org/D86664
The post-index matcher, before it queries the target legality, walks uses
of some instructions which in pathological cases can be massive. Since
no targets actually support indexed loads yet, disable this to stop wasting
compile time on something which is going to fail anyway.
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
This is needed for an upcoming change to how we translate conditional branches
which might generate these.
Differential Revision: https://reviews.llvm.org/D86383
With gcc 6.3.0, I hit the following compilation error:
../lib/CodeGen/GlobalISel/Combiner.cpp: In member function
‘bool llvm::Combiner::combineMachineInstrs(llvm::MachineFunction&,
llvm::GISelCSEInfo*)’:
../lib/CodeGen/GlobalISel/Combiner.cpp:156:54: error: suggest parentheses
around ‘&&’ within ‘||’ [-Werror=parentheses]
assert(!CSEInfo || !errorToBool(CSEInfo->verify()) &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
"CSEInfo is not consistent. Likely missing calls to "
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"observer on mutations");
Fix the code as suggested by the compiler.
https://reviews.llvm.org/D83833
Patch adds two new GICombinerRules for G_SELECT. The rules include:
combining selects with undef comparisons into their first selectee value,
and to combine away selects with constant comparisons. Patch additionally
adds a new combiner test for the AArch64 target to test these new G_SELECT
combiner rules and the existing select_same_val combiner rule.
Patch by mkitzan
https://reviews.llvm.org/D86676
Sometimes we can have the following code
x:gpr(s32) = G_OP
Say we build G_OP2 to the same x and then delete the previous instruction. Using something like
Register X = ...;
auto NewMIB = CSEBuilder.buildOp2(X, ... args);
Currently there's a mismatch in how NewMIB is profiled and inserted into the CSEMap (ie it doesn't consider register bank/register class along with type).Unify the profiling by refactoring and calling the common method.
This was found by turning on the CSEInfo::verify in at the end of each of our GISel passes which turns inconsistent state/non determinism in CSEing into crashes which likely usually indicates missing calls to Observer on mutations (the most common case). Here non determinism usually means not cseing sometimes, but almost never about producing incorrect code.
Also this patch adds this verification at the end of the combiners as well.
AArch64, X86 and Mips currently directly consumes these and custom
lowering to produce a libcall, but really these should follow the
normal legalization process through the libcall/lower action.
This produces less work for addressing mode matching. I think this is
safe since I don't think machine IR is supposed to give the same
aliasing properties as getelementptr in the IR.
shl ([sza]ext x, y) => zext (shl x, y).
Turns expensive 64 bit shifts into 32 bit if it does not overflow the
source type:
This is a port of an AMDGPU DAG combine added in
5fa289f0d8. InstCombine does this
already, but we need to do it again here to apply it to shifts
introduced for lowered getelementptrs. This will help matching
addressing modes that use 32-bit offsets in a future patch.
TableGen annoyingly assumes only a single match data operand, so
introduce a reusable struct. However, this still requires defining a
separate GIMatchData for every combine which is still annoying.
Adds a morally equivalent function to the existing
getShiftAmountTy. Without this, we would have to do try to repeatedly
query the legalizer info and guess at what type to use for the shift.
Known bits for G_ANYEXT was incorrectly using KnownBits::zext, causing
us to treat the high bits as zero even though they're (by definition)
unknown.
Differential Revision: https://reviews.llvm.org/D86323
The check for the landingpad instructions was overly restrictive. In optimimized builds PHI nodes can appear
before the landingpad instructions, resulting in a fallback to SelectionDAG.
This change relaxes the check to allow PHI nodes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86141
If we have a mask, and a value x, where (x & mask) == x, we can drop the AND
and just use x.
This is about a 0.4% geomean code size improvement on CTMark at -O3 for AArch64.
In AArch64, this is most useful post-legalization. Patterns like this often
show up when legalizing s1s, which must be extended to larger types.
e.g.
```
%cmp:_(s32) = G_ICMP ...
%and:_(s32) = G_AND %cmp, 1
```
Since G_ICMP only produces a single bit, there's no reason to mask it with the
G_AND.
Differential Revision: https://reviews.llvm.org/D85463
It's annoying to have to maintain multiple, nearly identical chains of if
statements which all set the same attributes.
Add a helper function, `addFlagsUsingAttrFn` which performs the attribute
setting.
Then, use wrappers for that function in `lowerCall` and `setArgFlags`.
(Note that the flag-setting code in `setArgFlags` was missing the returned
attribute. There's no selection for this yet, so no test. It's an example of
the kind of thing this lets us avoid, though.)
Differential Revision: https://reviews.llvm.org/D86159
Similar to this commit:
faf8065a99
Testcase is pretty much the same as
test/CodeGen/AArch64/tailcall-explicit-sret.ll
Except it uses i64 (since we don't handle the i1024 return values yet), and
doesn't have indirect tail call testcases (because we can't translate those
yet).
Differential Revision: https://reviews.llvm.org/D86148
This is restricted to single use loads, which if we fold to sextloads we can
find more optimal addressing modes on AArch64.
This also fixes an overload the MachineFunction::getMachineMemOperand() method
which was incorrectly using the MF alignment instead of the MMO alignment.
Differential Revision: https://reviews.llvm.org/D85966
By detecting this sign extend pattern early, we can uncover opportunities for
more optimizations.
Differential Revision: https://reviews.llvm.org/D85965
We weren't looking through the parameters on calls at all.
E.g., say you had
```
declare i32 @zext(i32 zeroext %x)
...
%y = call i32 @zext(i32 %something)
...
```
At the point of the call, we wouldn't know that the %something should have the
zeroext attribute.
This sets flags in about the same way as
TargetLoweringBase::ArgListEntry::setAttributes.
Differential Revision: https://reviews.llvm.org/D86125
Some of the lower implementations were relying on this, however the
type was not set depending on which form .lower* helper form you were
using. For instance, if you used an unconditonal lower(), the type was
never set. Most of the lower actions do not benefit from a type
parameter, and just expand in terms of the original operation's types.
However, some lowerings could benefit from an additional type hint to
combine a promotion and an expansion. An example of this is for
add/sub sat. The DAG integer legalization tries to use smarter
expansions directly when promoting the integer type, and doesn't
always produce the same instruction with a wider type.
Treat this as an optional hint argument, that only means something for
specific lower actions. It may be useful to generalize this mechanism
to pass a full list of type indexes and desired types, but I haven't
run into a case like that yet.
These should really match either G_BUILD_VECTOR or
G_BUILD_VECTOR_TRUNC, but there doesn't seem to be an existing
mechanism for matching alternative opcodes. There is GIM_SwitchOpcode,
but it seems to assume it's oly only used for matcher optimization.
I could also omit any opcode check and rely on the matcher directly
checking the opcode, but the table optimizer currently assumes there
has to be an opcode check.
Also doesn't try to handle undef elements like the DAG version.
This is mostly a straight port from SelectionDAG. We re-use the actual bit-test
analysis part from SwitchLoweringUtils, which was factored out earlier to
support jump-tables.
Differential Revision: https://reviews.llvm.org/D85233
This implements
```
(logic_op (op x...), (op y...)) -> (op (logic_op x, y))
```
when `op` is an extend, a shift, or an and.
This is similar to `DAGCombiner::hoistLogicOpWithSameOpcodeHands`
(with a bunch of missing cases, e.g. G_TRUNC, G_BITCAST, etc.)
This is implemented so it works both pre and post-legalization.
This also adds a general way to add a series of instructions in a combine.
(`applyBuildInstructionSteps`).
Differential Revision: https://reviews.llvm.org/D85050
This mirrors the support for the equivalent extracts. This also
creates a huge mess that would be greatly improved if we had any bit
operation combines.
Use the same basic strategy as LegalizeVectorTypes. Try to index into
smaller pieces if there's a constant index, and otherwise fall back to
a stack temporary.
Add given input and mark it as tied.
Doesn't create additional copy compared to
matching input constraint to virtual register.
Differential Revision: https://reviews.llvm.org/D85122
Get the argument register and ensure there's a copy to the virtual
register. AMDGPU and AArch64 have similarish code to get the livein
value, and I also want to use this in multiple places.
This is a bit more aggressive about setting the register class than
the original function, but that's probably OK.
I think we're missing a few verifier checks for function live ins. I
noticed AArch64's calling convention code is not actually adding
liveins to functions, only the entry block (which apparently might not
matter that much?). There should probably be a verifier check that
entry block live ins are also live into the function. We also might
need a verifier check that the copy to the livein virtual register is
in the entry block.
This one is pretty easy and shrinks the list of unhandled
intrinsics. I'm not sure how relevant the insert point is. Using the
insert position of EntryBuilder will place this after
constants. SelectionDAG seems to end up emitting these after argument
copies and before anything else, but I don't think it really
matters. This also ends up emitting these in the opposite order from
SelectionDAG, but I don't think that matters either.
This also needs a fix to stop the later passes dropping this as a dead
instruction. DeadMachineInstructionElim's version of isDead special
cases LOCAL_ESCAPE for some reason, and I'm not sure why it's excluded
from MachineInstr::isLabel (or why isDead doesn't check it).
I also noticed DeadMachineInstructionElim never considers inline asm
as dead, but GlobalISel will drop asm with no constraints.
This patch stops unconditionally transforming FSUB(-0, X) into an FNEG(X) while building the MIR.
This corresponds with the SelectionDAGISel change in D84056.
Differential Revision: https://reviews.llvm.org/D85139
Use pad with undef and unmerge with unused results. This is annoyingly
similar to several other places in LegalizerHelper, but they're all
slightly different.
For AMDGPU, vectors with elements < 32 bits should be indexed in
32-bit elements and the desired bits extracted from there. For
elements > 64-bits, these should be reduce to 64/32 elements to enable
the normal dynamic indexing paths.
In the dynamic index cases, this produces shorter code most of the
time. This does immediately regress the constant index cases, but this
should be fixed once we have the most basic of shift combines.
The element size > 64 case is pretty much ported from the exisiting
DAG implementation for extract element promote. The increasing element
size case is new.
https://reviews.llvm.org/D84909
Patch adds two new GICombinerRules, one for G_INTTOPTR and one for
G_PTRTOINT. The G_INTTOPTR elides ptr2int(int2ptr(x)) to a copy of x, if
the cast is within the same address space. The G_PTRTOINT elides
int2ptr(ptr2int(x)) to a copy of x. Patch additionally adds new combiner
tests for the AArch64 target to test these new combiner rules.
Patch by mkitzan
I still think it's highly questionable that we have two intrinsics
with identical behavior and only vary by the name of the libcall used
if it happens to be lowered that way, but try to reduce the feature
delta between SDAG and GlobalISel for recently added intrinsics. I'm
not sure which opcode should be considered the canonical one, but
lower roundeven back to round.
In future, we'd like to use the perfect-shuffle mechanism to deal with these
shuffle permutations. For now, this improves performance by avoiding the
super-expensive const-pool load + tbl instruction.
Differential Revision: https://reviews.llvm.org/D84866
I think these were added as a workaround for SelectionDAG lacking half
legalization support in the past. I think they should probably be
removed from the IR, but clang does still have a target control to
emit these instead of the native half fpext/fptrunc.
Widen or narrow a type to a type with the same scalar size as
another. This can be used to force G_PTR_ADD/G_PTRMASK's scalar
operand to match the bitwidth of the pointer type. Use this to
disallow narrower types for G_PTRMASK.
This adds the llvm.abs(), llvm.umin(), llvm.umax(), llvm.smin(),
and llvm.smax() intrinsics specified in D81829. For SelectionDAG,
the ISD opcodes and all the legalization and lowering already exist,
so this just wires them up to the intrinsic in the SDAG builder and
adds rudimentary tests. For GlobalISel only the min/max intrinsics
are wired up, as llvm.abs() will require the addition of a G_ABS op,
and corresponding legalization support.
Differential Revision: https://reviews.llvm.org/D84125
Add support in LegalizerHelper for lowering G_SADDSAT etc. either
using add/subtract-with-overflow or using max/min instructions.
Enable this lowering for AMDGPU so it can be tested. The legalization
rules are still approximate and skips out on using the clamp bit to
treat these as legal, which has never been used before. This also
doesn't yet try to deal with expanding SALU cases.
Summary: We do this already for output operands, but missed it for (non-tied) input operands.
Reviewers: arsenm, Petar.Avramovic
Reviewed By: arsenm
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, llvm-commits, kerbowa
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83763
This was structured in a way that implied every split argument is in
memory, or in registers. It is possible to pass an original argument
partially in registers, and partially in memory. Transpose the logic
here to only consider a single piece at a time. Every individual
CCValAssign should be treated independently, and any merge to original
value needs to be handled later.
This is in preparation for merging some preprocessing hacks in the
AMDGPU calling convention lowering into the generic code.
I'm also not sure what the correct behavior for memlocs where the
promoted size is larger than the original value. I've opted to clamp
the memory access size to not exceed the value register to avoid the
explicit trunc/extend/vector widen/vector extract instruction. This
happens for AMDGPU for i8 arguments that end up stack passed, which
are promoted to i16 (I think this is a preexisting DAG bug though, and
they should not really be promoted when in memory).
There are a few questionable things about this intrinsic and existing
DAG implementation. For some reason the intrinsic hardcodes the second
operand to be scalar-only i32, and SelectionDAG builder makes a
legalization decision based on whether the operand is constant.
Try to make the behavior more consistent with getGCDType, and bias
towards returning something closer to the source type whenever there's
an ambiguity.
Try harder to find a canonical unmerge type when trying to cover the
desired target type. Handle finding a compatible unmerge type for two
vectors with different element types. This will return the largest
multiple of the source vector element that will evenly divide the
target vector type.
Also make the handling mixing scalars and vectors, and prefer the
source element type as the unmerge target type.
Add narrowScalarFor action.
Add narrow scalar for typeIndex == 0 for G_FPTOSI/G_FPTOUI.
Legalize using narrowScalarFor as s16->s32 G_FPTOSI/G_FPTOUI
followed by s32->s64 G_SEXT/G_ZEXT.
Differential Revision: https://reviews.llvm.org/D84010
Add widenScalar for TypeIdx == 0 for G_SITOFP/G_UITOFP.
Legailize, using widenScalar, as s64->s32 G_SITOFP/G_UITOFP
followed by s32->s16 G_FPTRUNC.
Differential Revision: https://reviews.llvm.org/D83880
Some of the system registers readable on AArch64 and ARM platforms
return different values with each read (for example a timer counter),
these shouldn't be hoisted outside loops or otherwise interfered with,
but the normal @llvm.read_register intrinsic is only considered to read
memory.
This introduces a separate @llvm.read_volatile_register intrinsic and
maps all system-registers on ARM platforms to use it for the
__builtin_arm_rsr calls. Registers declared with asm("r9") or similar
are unaffected.
Check that input size matches size of destination reg class.
Attempt to extend input size when needed.
Differential Revision: https://reviews.llvm.org/D83384
handleAssignments was assuming every argument type is an MVT, and
assignArg would always fail. This fixes one of the hacks in the
current AMDGPU calling convention code that pre-processes the
arguments.
In an earlier commit 584d0d5c17 I
added functionality to allow AArch64 CodeGen support for falling
back to DAG ISel when Global ISel encounters scalable vector
types. However, it seems that we were not falling back early
enough as llvm::getLLTForType was still being invoked for scalable
vector types.
I've added a new fallback function to the call lowering class in
order to catch this problem early enough, rather than wait for
lowerFormalArguments to reject scalable vector types.
Differential Revision: https://reviews.llvm.org/D82524
This matches the DAG behavior where this is called after the loop
checking for calls. The AMDGPU implementation depends on knowing if
there are calls in the function or not, so move this later.
Another problem is finalizeLowering is actually called twice; I was
seeing weird inconsistencies since the first call would produce
unexpected results and the second run would correct them in some
contexts. Since this requires disabling the verifier, and it's useful
to serialize the MIR immediately after selection, FinalizeISel should
probably not be a real pass.
There was a rogue 'assert' in AArch64ISelLowering for the tuple.get intrinsics,
that shouldn't really have been there (I suspect this was a remnant from when
we expected the wider vector always to have come from a vector CONCAT).
When I tried to create a more minimal reproducer, I found a bug in
DAGCombiner where it drops the scalable flag when trying to fold:
extract_subv (bitcast X), Index --> bitcast (extract_subv X, Index')
This patch fixes both issues.
Reviewers: david-arm, efriedma, spatel
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82910
The translation of cmpxchg added by
9481399c0f specifically skipped weak
cmpxchg due to not understanding the meaning. Weak cmpxchg was added
in 420a216817. As explained in the
commit message, the weak mode is implicit in how
ATOMIC_CMP_SWAP_WITH_SUCCESS is lowered. If it's expanded to a regular
ATOMIC_CMP_SWAP, it's replaced with a strong cmpxchg.
This handling seems weird to me, but this was already following the
DAG behavior. I would expect the strong IR instruction to not have the
boolean output. Failing that, I might expect the IRTranslator to emit
ATOMIC_CMP_SWAP and a constant for the boolean.
At the moment we use Global ISel by default at -O0, however it is
currently not capable of dealing with scalable vectors for two
reasons:
1. The register banks know nothing about SVE registers.
2. The LLT (Low Level Type) class knows nothing about scalable
vectors.
For now, the easiest way to avoid users hitting issues when using
the SVE ACLE is to fall back on normal DAG ISel when encountering
instructions that operate on scalable vector types.
I've added a couple of RUN lines to existing SVE tests to ensure
we can compile at -O0. I've also added some new tests to
CodeGen/AArch64/GlobalISel/arm64-fallback.ll
that demonstrate we correctly fallback to DAG ISel at -O0 when
lowering formal arguments or translating instructions that involve
scalable vector types.
Differential Revision: https://reviews.llvm.org/D81557
This was passing in all the parameters needed to construct a
LegalizerHelper in the custom legalization, when it's simpler to just
pass in the existing helper.
This is slightly more annoying to use in the common case where you
don't need the legalizer helper, but we could add back the common
parameters back in addition to the helper.
I didn't propagate this to all the internal target changes that this
logically implies, but did update a sample one for
legalizeMinNumMaxNum.
This is in preparation for moving AMDGPU load/store legalization
entirely into custom lowering. The current set of legalization actions
is really constraining and not really capable of expressing all the
actions needed to legalize loads/stores. In particular there's no way
to express when the memory access itself needs to change size vs. the
result type. There's also a lot of redundancy since the same
split/widen actions need to be applied in both vector and scalar
cases. All of the sub-cases logically belong as steps in the legalizer
helper, but it will be easier to consider everything at once in custom
lowering.
Summary:
Half-precision floating point arguments and returns are currently
promoted to either float or int32 in clang's CodeGen and there's
no existing support for the lowering of `half` arguments and returns
from IR in AArch32's backend.
Such frontend coercions, implemented as coercion through memory
in clang, can cause a series of issues in argument lowering, as causing
arguments to be stored on the wrong bits on big-endian architectures
and incurring in missing overflow detections in the return of certain
functions.
This patch introduces the handling of half-precision arguments and returns in
the backend using the actual "half" type on the IR. Using the "half"
type the backend is able to properly enforce the AAPCS' directions for
those arguments, making sure they are stored on the proper bits of the
registers and performing the necessary floating point convertions.
Reviewers: rjmccall, olista01, asl, efriedma, ostannard, SjoerdMeijer
Reviewed By: ostannard
Subscribers: stuij, hiraditya, dmgreen, llvm-commits, chill, dnsampaio, danielkiss, kristof.beyls, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75169
It's possible to end up with a zext or something in the way of a G_CONSTANT,
even pre-legalization. This can happen with memsets.
e.g.
https://godbolt.org/z/Bjc8cw
To make sure we can catch these cases, use `getConstantVRegValWithLookThrough`
instead of `mi_match`.
Differential Revision: https://reviews.llvm.org/D81875
This implements the following combines:
((0-A) + B) -> B-A
(A + (0-B)) -> A-B
Porting over the basic algebraic combines from the DAGCombiner. There are
several combines which fold adds away into subtracts. This is just the simplest
one.
I noticed that add combines are some of the most commonly hit across CTMark,
(via print statements when they fire), so I'm porting over some of the obvious
ones.
This gives some minor code size improvements on CTMark at -O3 on AArch64.
Differential Revision: https://reviews.llvm.org/D77453
Put AND before ADD in LegalizerHelper::lowerFPTRUNC_F64_TO_F16
in order to match algorithm from AMDGPUTargetLowering::LowerFP_TO_FP16.
Differential Revision: https://reviews.llvm.org/D81666
Summary:
Fix crash when using -debug caused by the GlobalISel observer trying to print
an incomplete DBG_VALUE instruction. This was caused by the MachineIRBuilder
using buildInstr, which immediately inserts the instruction causing print,
instead of using BuildMI to first build up the instruction and using
insertInstr when finished.
Add RUN-line to existing debug-insts.ll test with -debug flag set to make sure
no crash is happening.
Also fixed a missing %s in the 2nd RUN-line of the same test.
Reviewers: t.p.northover, aditya_nandakumar, aemerson, dsanders, arsenm
Reviewed By: arsenm
Subscribers: wdng, arsenm, rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76934
If the target explicitly requested custom legalization, it should be
required to implement this. Also move default legalizeIntrinsic
implementation into the header so it's next to the related
legalizeCustom.
It was annoying enough that every custom lowering needed to set the
insert point, but this was made worse since now these all needed to be
updated to setInstrAndDebugLoc. Consolidate these so every
legalization action has the right insert position by default.
This should fix dropping debug info in every custom AMDGPU
legalization.
The current relationship between LegalizerHelper and MachineIRBuilder
confuses me, because the LegalizerHelper modifies the MachineIRBuilder
which it does not own. Constructing a LegalizerHelper destroys the
insert point, since the constructor calls setMF, which clears all the
fields. Try to separate these functions, so it's possible to construct
a LegalizerHelper from an existing MachineIRBuilder without losing the
insert point/debug loc.
The construction APIs for MachineIRBuilder don't make much sense, and
it's been annoying to sort through it with these trivial functions
separate from the declaration.
New instructions were getting printed both in createdInstr, and in the
final printNewInstrs, so it made it look like the same instructions
were created twice. This overall made reading the debug output
harder. Stop printing the initial construction and only print new
instructions in the summary at the end. This avoids printing the less
useful case where instructions are sometimes initially created with no
operands.
I'm not sure this is the correct instance to remove; now the visible
ordering is different. Now you will typically see the one erased
instruction message before all the new instructions in order. I think
this is the more logical view of typical legalization changes,
although it's mechanically backwards from the normal
insert-new-erase-old pattern.
Summary:
Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::allowsMisalignedMemoryAccesses` without marking it override.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81374
Just computing the alignment makes sense without caring about the
general known bits, such as for non-integral pointers. Separate the
two and start calling into the TargetLowering hooks for frame indexes.
Start calling the TargetLowering implementation for FrameIndexes,
which improves the AMDGPU matching for stack addressing modes. Also
introduce a new hook for returning known alignment of target
instructions. For AMDGPU, it would be useful to report the known
alignment implied by certain intrinsic calls.
Also stop using MaybeAlign.
The AMDGPU lowering for unconstrained G_FDIV sometimes needs to
introduce a mode switch in the middle, so it's helpful to have
constrained instructions available to legalize this. Right now nothing
is preventing reordering of the mode switch with the other
instructions in the expansion.
I inverted the mask when I ported to the new form of G_PTRMASK in
8bc03d2168.
I don't think this really broke anything, since G_VASTART isn't
handled for types with an alignment higher than the stack alignment.
Jessica Paquette