This reverts most of the following patches due to reports of miscompiles.
I've left the added test cases with comments updated to be FIXMEs.
1cf6f210a2 [IR] Disable select ? C : undef -> C fold in ConstantFoldSelectInstruction unless we know C isn't poison.
469da663f2 [InstSimplify] Re-enable select ?, undef, X -> X transform when X is provably not poison
122b0640fc [InstSimplify] Don't fold vectors of partial undef in SimplifySelectInst if the non-undef element value might produce poison
ac0af12ed2 [InstSimplify] Add test cases for opportunities to fold select ?, X, undef -> X when we can prove X isn't poison
9b1e95329a [InstSimplify] Remove select ?, undef, X -> X and select ?, X, undef -> X transforms
If no alignment is specified we try to find the datalayout by using the insert position to get the module so we can get the datalayout. But if those are null, then we deference a null pointer.
This patch adds asserts to make the failure a little more obvious than just seg faulting.
Differential Revision: https://reviews.llvm.org/D83829
Summary:
Ignore callback uses when adding a callback function
in the CallGraph. Callback functions are typically
created when outlining, e.g. for OpenMP, so they have
internal scope and linkage. They should not be added
to the ExternalCallingNode since they are only callable
by the specified caller function at creation time.
A CGSCC pass, such as OpenMPOpt, may need to update
the CallGraph by adding a new outlined callback function.
Without ignoring callback uses, adding breaks CGSCC
pass restrictions and results to a broken CallGraph.
Reviewers: jdoerfert
Subscribers: hiraditya, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83370
This restores commit 80d0a137a5, and the
follow on fix in 873c0d0786, with a new
fix for test failures after a 2-stage clang bootstrap, and a more robust
fix for the Chromium build failure that an earlier version partially
fixed. See also discussion on D75201.
Reviewers: evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
This changes the matrix load/store intrinsic definitions to load/store from/to
a pointer, and not from/to a pointer to a vector, as discussed in D83477.
This also includes the recommit of "[Matrix] Tighten LangRef definitions and
Verifier checks" which adds improved language reference descriptions of the
matrix intrinsics and verifier checks.
Differential Revision: https://reviews.llvm.org/D83785
The approach is simple: if a pass reports that it's not modifying a
Function/Module, compute a loose hash of that Function/Module and compare it
with the original one. If we report no change but there's a hash change, then we
have an error.
This approach misses a lot of change but it's not super intrusive and can
detect most of the simple mistakes.
Differential Revision: https://reviews.llvm.org/D80916
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: thopre, yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
This tightens the matrix intrinsic definitions in LLVM LangRef and adds
correspondings checks to the IR Verifier.
Differential Revision: https://reviews.llvm.org/D83477
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
The passes had to be moved to the llvm namespace, or else they would get
printed as "(anonymous namespace)::FooPass".
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
Summary:
Ignore callback uses when adding a callback function
in the CallGraph. Callback functions are typically
created when outlining, e.g. for OpenMP, so they have
internal scope and linkage. They should not be added
to the ExternalCallingNode since they are only callable
by the specified caller function at creation time.
A CGSCC pass, such as OpenMPOpt, may need to update
the CallGraph by adding a new outlined callback function.
Without ignoring callback uses, adding breaks CGSCC
pass restrictions and results to a broken CallGraph.
Reviewers: jdoerfert
Subscribers: hiraditya, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83370
Since none of these users really care about the actual type, hide the
type under a new size-getting attribute to go along with
hasPassPointeeByValueAttr. This will work better for the future byref
attribute, which may end up only tracking the byte size and not the IR
type.
We currently have 3 parameter attributes that should carry the type
(technically inalloca does not yet). The APIs are somewhat awkward
since preallocated/inalloca piggyback on byval in some places, but in
others are treated as distinct attributes. Since these are all
mutually exclusive, we should probably just merge all the attribute
infrastructure treating these as totally distinct attributes.
The `noundef` attribute indicates an argument or return value which
may never have an undef value representation.
This patch allows LLVM to parse the attribute.
Differential Revision: https://reviews.llvm.org/D83412
This cleans up the stack allocated by a @llvm.call.preallocated.setup.
Should either call the teardown or the preallocated call to clean up the
stack. Calling both is UB.
Add LangRef.
Add verifier check that the token argument is a @llvm.call.preallocated.setup.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D83354
The approach is simple: if a pass reports that it's not modifying a
Function/Module, compute a loose hash of that Function/Module and compare it
with the original one. If we report no change but there's a hash change, then we
have an error.
This approach misses a lot of change but it's not super intrusive and can
detect most of the simple mistakes.
Differential Revision: https://reviews.llvm.org/D80916
Summary:
Make Constant::getSplatValue recognize scalable vector splats of the
form created by ConstantVector::getSplat. Add unit test to verify that
C == ConstantVector::getSplat(C)->getSplatValue() for fixed width and
scalable vector splats
Reviewers: efriedma, spatel, fpetrogalli, c-rhodes
Reviewed By: efriedma
Subscribers: sdesmalen, tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82416
Summary:
It is reasonably common to want to clone some call with different bundles.
Let's actually provide an interface to do that.
Reviewers: chandlerc, jdoerfert, dblaikie, nickdesaulniers
Reviewed By: nickdesaulniers
Subscribers: llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83248
Assume bundle can have more than one entry with the same name,
but at least AlignmentFromAssumptionsPass::extractAlignmentInfo() uses
getOperandBundle("align"), which internally assumes that it isn't the
case, and happily crashes otherwise.
Minimal reduced reproducer: run `opt -alignment-from-assumptions` on
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
%0 = type { i64, %1*, i8*, i64, %2, i32, %3*, i8* }
%1 = type opaque
%2 = type { i8, i8, i16 }
%3 = type { i32, i32, i32, i32 }
; Function Attrs: nounwind
define i32 @f(%0* noalias nocapture readonly %arg, %0* noalias %arg1) local_unnamed_addr #0 {
bb:
call void @llvm.assume(i1 true) [ "align"(%0* %arg, i64 8), "align"(%0* %arg1, i64 8) ]
ret i32 0
}
; Function Attrs: nounwind willreturn
declare void @llvm.assume(i1) #1
attributes #0 = { nounwind "reciprocal-estimates"="none" }
attributes #1 = { nounwind willreturn }
This is what we'd have with -mllvm -enable-knowledge-retention
This reverts commit c95ffadb24.
Summary:
D80831 changed part of the prefix usage for AIX.
But there are other places getting prefix from DataLayout.
This patch intends to make prefix usage consistent on AIX.
Reviewed by: hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D81270
As per [MaxAlignmentExponent]{b7338fb1a6/llvm/include/llvm/IR/Value.h (L688)} alignment is not allowed to be more than 2^29.
Encoded as Log2, this means that storing alignment uses 5 bits.
This patch makes sure all instructions store their alignment in a consistent way, encoded as Log2 and using 5 bits.
Differential Revision: https://reviews.llvm.org/D83119
It's messy to pattern-match, and completely unnecessary: scalar indexes
work equally well.
See also discussion on D81620 and D82061.
Differential Revision: https://reviews.llvm.org/D82430
In most cases, this doesn't have much impact: the destructors just call
the base class destructor anyway. A few subclasses of ConstantExpr
actually store non-trivial data, though. Make sure we clean up
appropriately.
This is sort of ugly, but I don't see a good alternative given the
constraints.
Issue found by asan buildbots running the testcase for D80330.
Differential Revision: https://reviews.llvm.org/D82509
This is a followup on D78403.
I'm unsure about `getAtomicOpAlign` overloads that take `AtomicRMWInst` and `AtomicCmpXchgInst`, shouldn't `getAlign` provide the correct answer already?
Differential Revision: https://reviews.llvm.org/D81369
I noticed that for some benchmarks we spend quite a bit of time
inside AttributeList::hasAttrSomewhere(), mainly when checking
for the "returned" attribute. Most of the time the attribute will
not be present, in which case this function has to walk through
the whole attribute list and check for the attribute at each index.
This patch adds a cache of all "available somewhere" attributes
inside AttributeListImpl. This makes the structure 12 bytes larger,
but I don't think that's problematic, as attribute lists are uniqued.
Compile-time in terms of instructions retired improves by 0.4% on
average, but >1% for sqlite.
Differential Revision: https://reviews.llvm.org/D81867
When calling on-the-fly passes from the legacy pass manager, the modification
status is not reported, which is a problem in case we depend on an acutal
transformation pass, and not only analyse.
Update the Legacy PM API to optionally report the changed status, assert if a
change is detected but this change is lost.
Related to https://reviews.llvm.org/D80916
Differential Revision: https://reviews.llvm.org/D81236
Fixed an issue in DataLayout::getIntPtrType where we were assuming
the input type was always a fixed vector type, which isn't true.
Added a test that exposed the problem to:
Transforms/InstCombine/vector_gep1.ll
Differential Revision: https://reviews.llvm.org/D82294
This is cleaning up comments (mostly in the bitcode handling) about
removing some backward compatibility aspect in the 4.0 release.
Historically, "4.0" was used during the development of the 3.x
versions as "this future major breaking change version". At the time
the major number was used to indicate the compatibility. When we
reached 3.9 we decided to change the numbering, instead of going to
3.10 we went to 4.0 but after changing the meaning of the major
number to not mean anything anymore with respect to bitcode backward
compatibility.
The current policy
(https://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility)
indicates only now:
The current LLVM version supports loading any bitcode since version 3.0.
Differential Revision: https://reviews.llvm.org/D82514
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
This patch fixes a compiler crash that was hit when trying to simplify
the following code:
getelementptr [2 x i64], [2 x i64]* null, i64 0, <vscale x 2 x i64> zeroinitializer
For the case where we have a null pointer value like above, we just
need to ensure we don't assume the indices are always fixed width.
Differential Revision: https://reviews.llvm.org/D82183
This function is deceptive at best: it doesn't return what you'd expect.
If you have an arbitrary GlobalValue and you want to determine the
alignment of that pointer, Value::getPointerAlignment() returns the
correct value. If you want the actual declared alignment of a function
or variable, GlobalObject::getAlignment() returns that.
This patch switches all the users of GlobalValue::getAlignment to an
appropriate alternative.
Differential Revision: https://reviews.llvm.org/D80368
This has two advantages: one, it's simpler, and two, it doesn't require
heroic pattern matching with scalable vectors.
Also includes a small fix to DataLayout to allow the scalable vector
testcase to work correctly.
Differential Revision: https://reviews.llvm.org/D82061
Summary:
this reduces significantly the number of assumes generated without aftecting too much
the information that is preserved. this improves the compile-time cost
of enable-knowledge-retention significantly.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79650
This functionality is very similar to Function compatibility with
AnnotationWriter. This change allows us to use AnnotationWriter with
BasicBlock through BB.print() method.
Reviewed-By: apilipenko
Differntial Revision: https://reviews.llvm.org/D81321
This patch adjust the load/store matrix intrinsics, formerly known as
llvm.matrix.columnwise.load/store, to improve the naming and allow
passing of extra information (volatile).
The patch performs the following changes:
* Rename columnwise.load/store to column.major.load/store. This is more
expressive and also more in line with the naming in Clang.
* Changes the stride arguments from i32 to i64. The stride can be
larger than i32 and this makes things more uniform with the way
things are handled in Clang.
* A new boolean argument is added to indicate whether the load/store
is volatile. The lowering respects that when emitting vector
load/store instructions
* MatrixBuilder is updated to require both Alignment and IsVolatile
arguments, which are passed through to the generated intrinsic. The
alignment is set using the `align` attribute.
The changes are grouped together in a single patch, to have a single
commit that breaks the compatibility. We probably should be fine with
updating the intrinsics, as we did not yet officially support them in
the last stable release. If there are any concerns, we can add
auto-upgrade rules for the columnwise intrinsics though.
Reviewers: anemet, Gerolf, hfinkel, andrew.w.kaylor, LuoYuanke, nicolasvasilache, rjmccall, ftynse
Reviewed By: anemet, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D81472
Summary:
Assume all usages of this function are explicitly fixed-width operations
and cast to FixedVectorType
Reviewers: efriedma, sdesmalen, c-rhodes, majnemer, dblaikie
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80262
Summary:
Fix invalid usages of getNumElements identified by test case
LLVM.Transforms/InstCombine::vscale_extractelement.ll.
changesLength: Since the length of the llvm::SmallVector shufflemask
is related to the minimum number of elements in a scalable vector, it is
fine to just get the Min field of the ElementCount
isIdentityWithExtract: Since it is not possible to express the mask
needed for this pattern for scalable vectors, we can just bail before
calling getNumElements()
Reviewers: efriedma, sdesmalen, fpetrogalli, gchatelet, yrouban, craig.topper
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81969
Summary:
Previously, GlobalAlias::copyAttributesFrom did not preserve ThreadLocalMode,
causing incorrect IR generation in IR linking flows. This patch pushes the code
responsible for copying this attribute from GlobalVariable::copyAttributesFrom
down to GlobalValue::copyAttributesFrom so that it is shared by GlobalAlias.
Fixes PR46297.
Reviewers: tejohnson, pcc, hans
Reviewed By: tejohnson, hans
Subscribers: hiraditya, ibookstein, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81605
Summary:
Attempts to call getNumElements on scalable vectors identified by test
LLVM.Other::scalable-vectors-core-ir.ll. Since these checks are all
attempting to find if two vectors are the same size, calling
getElementCount will only increase safety.
Reviewers: efriedma, aprantl, reames, kmclaughlin, sdesmalen
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81895
Summary:
this reduces significantly the number of assumes generated without aftecting too much
the information that is preserved. this improves the compile-time cost
of enable-knowledge-retention significantly.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79650
In preparation for a patch that will enforce new rules for the usage of
the strictfp attribute, this patch introduces auto-upgrade behavior that
will replace the strictfp attribute on callsites with nobuiltin if the
enclosing function declaration doesn't also have the strictfp attribute.
This auto-upgrade isn't being performed on .ll files because that would
prevent us from writing a test for the forthcoming verifier behavior.
Differential Revision: https://reviews.llvm.org/D70096
When checking for an enum function attribute, use hasFnAttribute()
rather than hasAttribute() at FunctionIndex, because it is
significantly faster (and more concise to boot).
Change BasicBlock::removePredecessor to optionally return a vector of
instructions which might be dead. Use this in ConstantFoldTerminator to
delete them if they are dead.
Reapply with a bug fix: don't drop the "!KeepOneInputPHIs" argument when
removePredecessor calls PHINode::removeIncomingValue.
Differential Revision: https://reviews.llvm.org/D80206
Change BasicBlock::removePredecessor to optionally return a vector of
instructions which might be dead. Use this in ConstantFoldTerminator to
delete them if they are dead.
Differential Revision: https://reviews.llvm.org/D80206
Summary:
This patch adds optional field into function summary,
implements asm and bitcode serialization. YAML
serialization is omitted and can be added later if
needed.
This patch includes this information into summary only
if module contains at least one sanitize_memtag function.
In a near future MTE is the user of the analysis.
Later if needed we can provede more direct control
on when information is included into summary.
Reviewers: eugenis
Subscribers: hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80908
Commit d77ae1552f ("[DebugInfo] Support to emit debugInfo
for extern variables") added support to emit debuginfo
for extern variables. Currently, only BPF target enables to
emit debuginfo for extern variables.
But if the extern variable has "void" type, the compilation will
fail.
-bash-4.4$ cat t.c
extern void bla;
void *test() {
void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
missing global variable type
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
isLocal: false, isDefinition: false)
...
fatal error: error in backend: Broken module found, compilation aborted!
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace,
preprocessed source, and associated run script.
Stack dump:
...
The IR requires a DIGlobalVariable must have a valid type and the
"void" type does not generate any type, hence the above fatal error.
Note that if the extern variable is defined as "const void", the
compilation will succeed.
-bash-4.4$ cat t.c
extern const void bla;
const void *test() {
const void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
-bash-4.4$ cat t.ll
...
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
type: !6, isLocal: false, isDefinition: false)
!6 = !DIDerivedType(tag: DW_TAG_const_type, baseType: null)
...
Since currently, "const void extern_var" is supported by the
debug info, it is natural that "void extern_var" should also
be supported. This patch disabled assertion of "void extern_var"
in IR verifier and add proper guarding when emiting potential
null debug info type to dwarf types.
Differential Revision: https://reviews.llvm.org/D81131
Replace getNumElements() with getElementCount() when asserting that
two types have the same element counts.
Differential Revision: https://reviews.llvm.org/D81371
Now that we have an operand based form for the GC arguments to a statepoint intrinsic, update RS4GC to use it and update tests to reflect. This is pretty straight forward. I nearly landed without review, but figured a second set of eyes didn't hurt.
Differential Revision: https://reviews.llvm.org/D81121
This patch fixes VPIntrinsic::canIgnoreVectorLength when used on a
VPIntrinsic with scalable vector types. Also includes new unittest cases
for the '<vscale x 1 x whatever>' and '%evl == vscale' corner cases.
Allow InvokeInst to have the second optional prof branch weight for
its unwind branch. InvokeInst is a terminator with two successors.
It might have its unwind branch taken many times. If so
the BranchProbabilityInfo unwind branch heuristic can be inaccurate.
This patch allows a higher accuracy calculated with both branch
weights set.
Changes:
- A new section about InvokeInst is added to
the BranchWeightMetadata page. It states the old information that
missed in the doc and adds new about the second branch weight.
- Verifier is changed to allow either 1 or 2 branch weights
for InvokeInst.
- A new test is written for BranchProbabilityInfo to demonstrate
the main improvement of the simple fix in calcMetadataWeights().
- Several new testcases are created for Inliner. Those check that
both weights are accounted for invoke instruction weight
calculation.
- PGOUseFunc::setBranchWeights() is fixed to be applicable to
InvokeInst.
Reviewers: davidxl, reames, xur, yamauchi
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80618
Remove the function Instruction::setProfWeight() and make
use of Instruction::copyMetadata(.., {LLVMContext::MD_prof}).
This is correct for all use cases of setProfWeight() as it
is applied to CallBase instructions only.
This change results in prof metadata copied intact even if
the source has "VP". The old pair of calls
extractProfTotalWeight() + setProfWeight() resulted in
setting branch_weights if the source had "VP" data.
Reviewers: yamauchi, davidxl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80987
In an earlier patch I removed the need for
IITDescriptor::ScalableVecArgument, which involved changing
DecodeIITType to pull out the last IIT_Info from the list. However,
it turns out this is unsafe and causes ubsan failures. I've tried to
fix this a different way by simply passing the last IIT_Info as an
additional argument to DecodeIITType.
Differential Revision: https://reviews.llvm.org/D81057
We introduced the GCStatepointInst class and have migrated almost all users of Statepoint/ImmutableStatepoint to the new API. Given downstream consumers have had a week to migrate, remove code which is now dead.
As noted in a comment on D80937, all of these are specified as unsigned values, but the verifier code was using signed. Given the practical values involved, the different in range didn't matter, but we might as well clean it up.
Currently, gc.relocates are defined in terms of indices into the statepoint's operand list. Given the gc args are at the end of a variable length list of operands, this makes interpreting their indices by hand a tad challenging. We can simplify the statepoint sequence and improve readability quite a bit by pulling these new operands into their own named operand bundle.
This patch defines a new operand bundle tag "gc-live". The semantics of the bundle are the same as the existing gc arguments of a statepoint. This patch simply introduces the definition and codegen for the bundle, future patches will migrate RS4GC to emitting the new form.
Interestingly, with this done and the recent migration to using deopt and gc-transition bundles, we really don't have much left in the statepoint itself. It really looks like the existing ID and flags fields are redundant; we have (existing!) attributes for all of them. I think we'll be able to reduce the gc.statepoint signature to simply a wrapped call (e.g. actual target and actual arguments).
Differential Revision: https://reviews.llvm.org/D80937
Summary:
The working set size heuristics (ProfileSummaryInfo::hasHugeWorkingSetSize)
under the partial sample PGO may not be accurate because the profile is partial
and the number of hot profile counters in the ProfileSummary may not reflect the
actual working set size of the program being compiled.
To improve this, the (approximated) ratio of the the number of profile counters
of the program being compiled to the number of profile counters in the partial
sample profile is computed (which is called the partial profile ratio) and the
working set size of the profile is scaled by this ratio to reflect the working
set size of the program being compiled and used for the working set size
heuristics.
The partial profile ratio is approximated based on the number of the basic
blocks in the program and the NumCounts field in the ProfileSummary and computed
through the thin LTO indexing. This means that there is the limitation that the
scaled working set size is available to the thin LTO post link passes only.
Reviewers: davidxl
Subscribers: mgorny, eraman, hiraditya, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79831
Replace calls to getNumElements() with getElementCount() in order
to avoid warnings for scalable vectors. The warnings were discovered
by this existing test:
test/CodeGen/AArch64/sve-gep.ll
Differential revision: https://reviews.llvm.org/D80782
This is split off from D79100 and:
- adds a intrinsic description/definition for @llvm.get.active.lane.mask(), and
- describe its semantics in LangRef.
As described (in more detail) in its LangRef section, it is semantically
equivalent to an icmp with the vector induction variable and the back-edge
taken count, and generates a mask of active/inactive vector lanes.
It will have several use cases. First, it will be used by the
ExpandVectorPredication pass for the VP intrinsics, to expand VP intrinsics for
scalable vectors on targets that do not support the `%evl` parameter, see
D78203.
Also, this is part of, and essential for our ARM MVE tail-predication story:
- this intrinsic will be emitted by the LoopVectorizer in D79100, when
the scalar epilogue is tail-folded into the vector body. This new intrinsic
will generate the predicate for the masked loads/stores, and it takes the
back-edge taken count as an argument. The back-edge taken count represents the
number of elements processed by the loop, which we need to setup MVE
tail-predication.
- Emitting the intrinsic is controlled by a new TTI hook, see D80597.
- We pick up this new intrinsic in an ARM MVETailPredication backend pass, see
D79175, and convert it to a MVE target specific intrinsic/instruction to
create a tail-predicated loop.
Differential Revision: https://reviews.llvm.org/D80596
I'd apparently only grepped in the lib directories and missed a few used in the Statepoint header itself. Beyond simple mechanical cleanup, changed the type of one routine to reflect the fact it also returns a statepoint.
00940fb854 changed this code to
construct a set for the B metadata. However, it still performs a
linear is_contained query, rather than making use of the set
structure.
Summary:
Count the per-module number of basic blocks when the module summary is computed
and sum them up during Thin LTO indexing.
This is used to estimate the working set size under the partial sample PGO.
This is split off of D79831.
Reviewers: davidxl, espindola
Subscribers: emaste, inglorion, hiraditya, MaskRay, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80403
Continues from D80598.
The key point of the change is to default to using operand bundles instead of the inline length prefix argument lists for statepoint nodes. An important subtlety to note is that the presence of a bundle has semantic meaning, even if it is empty. As such, we need to make a somewhat deeper change to the interface than is first obvious.
Existing code treats statepoint deopt arguments and the deopt bundle operands differently during inlining. The former is ignored (resulting in caller state being dropped), the later is merged.
We can't preserve the old behaviour for calls with deopt fed to RS4GC and then inlining, but we can avoid the no-deopt case changing. At least in internal testing, that seem to be the important one. (I'd argue the "stop merging after RS4GC" behaviour for the former was always "unexpected", but that the behaviour for non-deopt calls actually make sense.)
Differential Revision: https://reviews.llvm.org/D80674
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
Now that all of the statepoint related routines have classes with isa support, let's cleanup.
I'm leaving the (dead) utitilities in tree for a few days so that I can do the same cleanup downstream without breakage.
Back when we had CallSite, we implemented the current Statepoint/ImmutableStatepoint structure in analogous manner. Now that CallSite has been removed, the structure used for statepoints looks decidely out of place. gc.statepoint is one of the small handful of intrinsics which are invokable. Because of this, it can't subclass IntrinsicInst as is idiomatic.
This change simply introduces the GCStatepointInst class, restructures the existing Statepoint/ImmutableStatepoint types to wrap it. I will be landing a series of changes to sink functionality into GCStatepointInst and updating callers to be more idiomatic.
- This allow us to specify the (minimal) alignment on an intrinsic's
arguments and, more importantly, the return value.
Differential Revision: https://reviews.llvm.org/D80422
In the current statepoint design, we have four distinct groups of operands to the call: call args, gc transition args, deopt args, and gc args. This format prexisted the support in IR for operand bundles and was in fact one of the inspirations for the extension. However, we never went back and rearchitected statepoints to fully leverage bundles.
This change is the first in a small sequence to do so. All this does is extend the SelectionDAG lowering code to allow deopt and gc transition operands to be specified in either inline argument bundles or operand bundles.
Differential Revision: https://reviews.llvm.org/D8059
Summary:
preallocated and musttail can work together, but we don't want to call
@llvm.call.preallocated.setup() to modify the stack in musttail calls.
So we shouldn't have the "preallocated" operand bundle when a
preallocated call is musttail.
Also disallow use of preallocated on calls without preallocated.
Codegen not yet implemented.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80581
-fno-semantic-interposition is currently the CC1 default. (The opposite
disables some interprocedural optimizations.) However, it does not infer
dso_local: on most targets accesses to ExternalLinkage functions/variables
defined in the current module still need PLT/GOT.
This patch makes explicit -fno-semantic-interposition infer dso_local,
so that PLT/GOT can be eliminated if targets implement local aliases
for AsmPrinter::getSymbolPreferLocal (currently only x86).
Currently we check whether the module flag "SemanticInterposition" is 0.
If yes, infer dso_local. In the future, we can infer dso_local unless
"SemanticInterposition" is 1: frontends other than clang will also
benefit from the optimization if they don't bother setting the flag.
(There will be risks if they do want ELF interposition: they need to set
"SemanticInterposition" to 1.)
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
Summary:
Replace any extant metadata uses of a dying instruction with undef to
preserve debug info accuracy. Some alternatives include:
- Treat Instruction like any other Value, and point its extant metadata
uses to an empty ValueAsMetadata node. This makes extant dbg.value uses
trivially dead (i.e. fair game for deletion in many passes), leading to
stale dbg.values being in effect for too long.
- Call salvageDebugInfoOrMarkUndef. Not needed to make instruction removal
correct. OTOH results in wasted work in some common cases (e.g. when all
instructions in a BasicBlock are deleted).
This came up while discussing some basic cases in
https://reviews.llvm.org/D80052.
Reviewers: jmorse, TWeaver, aprantl, dexonsmith, jdoerfert
Subscribers: jholewinski, qcolombet, hiraditya, jfb, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80264
Summary:
Module::setProfileSummary currently calls addModuelFlag. This prevents from
updating the ProfileSummary metadata in the module and results in a second
ProfileSummary added instead of replacing an existing one. I don't think this is
the expected behavior. It prevents updating the ProfileSummary and it does not
make sense to have more than one. To address this, add Module::setModuleFlag and
use it from setProfileSummary.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79902
Summary:
PartialProfileRatio approximately represents the ratio of the number of profile
counters of the program being built to the number of profile counters in the
partial sample profile. It is used to scale the working set size under the
partial sample profile to reflect the size of the program being built and to
improve the working set size heuristics.
This is a split from D79831.
Reviewers: davidxl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79951
I have refactored the code so that we no longer need the
ScalableVecArgument descriptor - the scalable property of vectors is
now encoded using the ElementCount class in IITDescriptor. This means
that when matching intrinsics we know precisely how to match the
arguments and return values.
Differential Revision: https://reviews.llvm.org/D80107
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
Summary:
Rename 'i' to 'I'.
Factor out the optional field handling to getOptionalVal().
Split out of D79951.
Reviewers: davidxl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80230
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
This is the second attempt at landing this patch, after fixing the
KeepOneInputPHIs behaviour to also keep zero input PHIs.
Differential Revision: https://reviews.llvm.org/D80141
r119493 protected against PHINode::hasConstantValue returning the PHI
node itself, but a later fix in r159687 means that can never happen, so
the workarounds are no longer required.
Summary:
Currently they are not supported together. Supporting them will require
a LangRef change. See discussion in https://reviews.llvm.org/D77689.
Reviewers: rnk, efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80132
r2694 fixed a bug where removePredecessor could create IR with a use not
dominated by its def in a self loop. But this could only happen in an
unreachable loop, and since that time the rules have been relaxed so
that defs don't have to dominate uses in unreachable code, so the fix is
unnecessary. The regression test added in r2691 still stands.
Differential Revision: https://reviews.llvm.org/D80128
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
The "null-pointer-is-valid" attribute needs to be checked by many
pointer-related combines. To make the check more efficient, convert
it from a string into an enum attribute.
In the future, this attribute may be replaced with data layout
properties.
Differential Revision: https://reviews.llvm.org/D78862
Remove Use::setPrev. It provided no value because it had the same
accessibility as the underlying field Prev, and there was no
corresponding setNext anyway.
Simplify Use::removeFromList.
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
I have changed the ScalableVecArgument case in matchIntrinsicType
to create a new FixedVectorType. This means that the next case we
hit (Vector) will not assert when calling getNumElements(), since
we know that it's always a FixedVectorType. This is a temporary
measure for now, and it will be fixed properly in another patch
that refactors this code.
The changes are covered by this existing test:
CodeGen/AArch64/sve-intrinsics-fp-converts.ll
In addition, I have added a new test to ensure that we correctly
reject SVE intrinsics when called with fixed length vector types.
Differential Revision: https://reviews.llvm.org/D79416
This patch adds support for DWARF attribute DW_AT_data_location.
Summary:
Dynamic arrays in fortran are described by array descriptor and
data allocation address. Former is mapped to DW_AT_location and
later is mapped to DW_AT_data_location.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79592
llvm rejects DWARF operator DW_OP_push_object_address.This DWARF
operator is needed for Flang to support allocatable array.
Summary:
Currently llvm rejects DWARF operator DW_OP_push_object_address.
below error is produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151)
warning: ignoring invalid debug info in pushobj.ll
[..]
There are some parts missing in support of this operator, need to
be completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79306
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
This patch extends DIModule Debug metadata in LLVM to support
Fortran modules. DIModule is extended to contain File and Line
fields, these fields will be used by Flang FE to create debug
information necessary for representing Fortran modules at IR level.
Furthermore DW_TAG_module is also extended to contain these fields.
If these fields are missing, debuggers like GDB won't be able to
show Fortran modules information correctly.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79484
We want to add a way to avoid merging identical calls so as to keep the
separate debug-information for those calls. There is also an asan
usecase where having this attribute would be beneficial to avoid
alternative work-arounds.
Here is the link to the feature request:
https://bugs.llvm.org/show_bug.cgi?id=42783.
`nomerge` is different from `noline`. `noinline` prevents function from
inlining at callsites, but `nomerge` prevents multiple identical calls
from being merged into one.
This patch adds `nomerge` to disable the optimization in IR level. A
followup patch will be needed to let backend understands `nomerge` and
avoid tail merge at backend.
Reviewed By: asbirlea, rnk
Differential Revision: https://reviews.llvm.org/D78659
don't span their entire scope.
The previous commit (6d1c40c171) is an older version of the test.
Reviewed By: aprantl, vsk
Differential Revision: https://reviews.llvm.org/D79573
When calculating the natural alignment for scalable vectors it
is acceptable to calculate an allocation size based on the minimum
number of elements in the vector.
This code path is exercised by an existing test:
CodeGen/AArch64/sve-intrinsics-int-arith.ll
Differential Revision: https://reviews.llvm.org/D79475
Summary: Add -detailed-summary support for sample profile dump to match that of instrumentation profile.
Reviewers: wmi, davidxl, hoyFB
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79291
Summary:
Constrain which metadata nodes are allowed to be, or contain,
DILocations. This ensures that logic for updating DILocations in a
Module is complete.
Currently, !llvm.loop metadata is the only odd duck which contains
nested DILocations. This has caused problems in the past: some passes
forgot to visit the nested locations, leading to subtly broken debug
info and late verification failures.
If there's a compelling reason for some future metadata to nest
DILocations, we'll need to introduce a generic API for updating the
locations attached to an Instruction before relaxing this check.
Reviewers: aprantl, dsanders
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79245
Summary:
Remove invalid usage of VectorType::getNumElements in
ShuffleVectorInst::isValidOperands identified by test case
llvm::Analysis/ConstantFolding/vscale-shufflevector.ll. The tested
conditions hold for both fixed width and scalable vectors; use
getElementCount().
Reviewers: efriedma, sdesmalen, c-rhodes, spatel
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79212
Summary:
Have stripNonLineTableDebugInfo() attach updated !llvm.loop metadata to
an instruction (instead of updating and then discarding the metadata).
This fixes "!dbg attachment points at wrong subprogram for function"
errors seen while archiving an iOS app.
It would be nice -- as a follow-up -- to catch this issue earlier,
perhaps by modifying the verifier to constrain where DILocations are
allowed. Any alternative suggestions appreciated.
rdar://61982466
Reviewers: aprantl, dsanders
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79200
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Add llvm.call.preallocated.{setup,arg} instrinsics.
Add "preallocated" operand bundle which takes a token produced by llvm.call.preallocated.setup.
Add "preallocated" parameter attribute, which is like byval but without the copy.
Verifier changes for these IR constructs.
See https://github.com/rnk/llvm-project/blob/call-setup-docs/llvm/docs/CallSetup.md
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74651
Profile and profile summary are usually read only once and then annotated
on IR. The profile summary metadata on IR should include the value of the
newly added partial profile flag, so that compilation phase like thinlto
postlink can get the full set of profile information.
Differential Revision: https://reviews.llvm.org/D78310
This means AttrBuilder will always create a sorted set of attributes and
we can skip the sorting step. Sorting attributes is surprisingly
expensive, and I recently made it worse by making it use array_pod_sort.
Attributes are currently stored as a simple list. Enum attributes
additionally use a bitset to allow quickly determining whether an
attribute is set. String attributes on the other hand require a
full scan of the list. As functions tend to have a lot of string
attributes (at least when clang is used), this is a noticeable
performance issue.
This patch adds an additional name => attribute map to the
AttributeSetNode, which allows querying string attributes quickly.
This results in a 3% reduction in instructions retired on CTMark.
Changes to memory usage seem to be in the noise (attribute sets are
uniqued, and we don't tend to have more than a few dozen or hundred
unique attribute sets, so adding an extra map does not have a
noticeable cost.)
Differential Revision: https://reviews.llvm.org/D78859
The CallSite and ImmutableCallSite were removed in a previous
commit. So rename the file to match the remaining class and
the name of the cpp that implements it.
Summary:
- Whether or not a vector is scalable is a function of its type. Since
all instances of ScalableVectorType will have true for this value and
all instances of FixedVectorType will have false for this value, there
is no need to store it as a class member.
Reviewers: efriedma, fpetrogalli, kmclaughlin
Reviewed By: fpetrogalli
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78601
Summary:
Piggy-back off of TypeSize's STRICT_FIXED_SIZE_VECTORS flag and:
- if it is defined, assert that the vector is not scalable
- if it is not defined, complain if the vector is scalable
Reviewers: efriedma, sdesmalen, c-rhodes
Reviewed By: sdesmalen
Subscribers: hiraditya, mgorny, tschuett, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78576
Summary:
* VectorType::getBitWidth() is just an unsafe version of
getPrimitiveSizeInBits() that assumes all vectors are fixed width.
Reviewers: efriedma, sdesmalen, huntergr, craig.topper
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77833
CallSite will likely be removed soon, but AbstractCallSite serves a different purpose and won't be going away.
This patch switches it to internally store a CallBase* instead of a
CallSite. The only interface changes are the removal of the getCallSite
method and getCallBackUses now takes a CallBase&. These methods had only
a few callers that were easy enough to update without needing a
compatibility shim.
In the future once the other CallSites are gone, the CallSite.h
header should be renamed to AbstractCallSite.h
Differential Revision: https://reviews.llvm.org/D78322
Remove unused BasicBlock forward declaration from Pass.h and Attributes/BasicBlock includes from Pass.cpp
Add BasicBlock forward declaration to UnifyFunctionExitNodes.h which was relying on Pass.h
The current strategy LICM uses when sinking for debuginfo is
that of picking the debug location of one of the uses.
This causes stepping to be wrong sometimes, see, e.g. PR45523.
This patch introduces a generalization of getMergedLocation(),
that operates on a vector of locations instead of two, and try
to merge all them together, and use the new API in LICM.
<rdar://problem/61750950>
Summary:
AbstractCallSite::getCallbackUses() does not check that callback callee index from
the callback metadata does not exceed the total number of call arguments. This patch
add such validation check.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78112
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
Summary:
StringPool has many caveats and isn't used in the monorepo. I will
propose removing it as a patch separate from this refactoring patch.
Reviewers: rriddle
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77976
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77276
When constrained floating point is enabled the AArch64-specific builtins don't use constrained intrinsics in some cases. Fix that.
Neon is part of this patch, so ARM is affected as well.
Differential Revision: https://reviews.llvm.org/D77074
This replaces the ChildrenGetter inside the DominatorTree with
GraphTraits over a GraphDiff object, an object which encapsulated the
view of the previous CFG.
This also simplifies the extentions in clang which use DominatorTree, as
GraphDiff also filters nullptrs.
Re-land a90374988e after moving CFGDiff.h
to Support.
Differential Revision: https://reviews.llvm.org/D77341
This reverts commit a90374988e and 5da1671bf8.
A new dependency is introduced here from Support to IR which seems like
a layering violation. It also breaks the MLIR build at the moment.
Summary:
This replaces the ChildrenGetter inside the DominatorTree with
GraphTraits over a GraphDiff object, an object which encapsulated the
view of the previous CFG.
This also simplifies the extentions in clang which use DominatorTree, as
GraphDiff also filters nullptrs.
Reviewers: kuhar, dblaikie, NutshellySima
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77341
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
Summary:
Thanks to Bill Wendling (void) for the report and steps to reproduce. It looks
like this was missed during r350508's cleanup of the CallSite split into
CallBase, CallInst, and CallBrInst.
This was exposed by running pgo on a callbr, which was creating a ptrtoint to
the inline asm thinking it was an indirect call. The relevant callchain looks
like:
IndirectCallPromotionPlugin::run()
-> PGOIndirectCallVisitor::findIndirectCalls()
-> PGOIndirectCallVisitor::visitCallBase()
-> CallBase::isIndirectCall()
Reviewers: void, chandlerc
Reviewed By: void
Subscribers: hiraditya, llvm-commits, craig.topper, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77600
Summary:
24 March 2020: LLVM 10.0.0 is out.
I gathered all deprecated function introduced between 9 and 10 and cleaned them up so they will be removed from 11.
> git log -p -S LLVM_ATTRIBUTE_DEPRECATED llvmorg-9.0.0..llvmorg-10.0.0
Reviewers: courbet
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77409
Since D73835 we no longer need to define the whole IRBuilder
implementation in the header. This patch moves some of the larger
methods out of line, into the C++ file.
Differential Revision: https://reviews.llvm.org/D77332
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
If we have a must-tail call the callee and caller need to have matching
ABIs. Part of that is alignment which we might modify when we deduce
alignment of arguments of either. Since we would need to keep them in
sync, which is not as simple, we simply avoid deducing alignment for
arguments of the must-tail caller or callee.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D76673
Currently ConstantRange::binaryAnd/binaryOr results are too pessimistic
for single element constant ranges.
If both operands are single element ranges, we can use APInt's AND and
OR implementations directly.
Note that some other binary operations on constant ranges can cover the
single element cases naturally, but for OR and AND this unfortunately is
not the case.
Reviewers: nikic, spatel, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76446
This patch adds checks to the verifier to ensure the dimension arguments
passed to the matrix intrinsics match the vector types for their
arugments/return values.
Reviewers: anemet, Gerolf, andrew.w.kaylor, LuoYuanke
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D77129
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary: this patch preserve information from various places in EarlyCSE into assume bundles.
Reviewers: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76769
Optimize the common case of splat vector constant. For large vector
going through all elements is expensive. For splatr/broadcast cases we
can skip going through all elements.
Differential Revision: https://reviews.llvm.org/D76664
This change implements constant folding to constrained versions of
intrinsics, implementing rounding: floor, ceil, trunc, round, rint and
nearbyint.
Differential Revision: https://reviews.llvm.org/D72930
Summary:
It is safe to assume that the TypeSize associated to scalar types has
a fixed size.
This avoids an implicit cast of TypeSize to integer inside
`Type::getScalarSizeInBits()`, as such implicit cast is deprecated.
Reviewers: efriedma, sdesmalen
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76892
Previously, we would ignore alloca alignment when building the frame
and just use the natural alignment of the allocated type. If an alloca
is over-aligned for its IR type, this could lead to a frame entry with
inadequate alignment for the downstream uses of the alloca.
Since highly-aligned fields also tend to produce poor layouts under a
naive layout algorithm, I've also switched coroutine frames to use the
new optimal struct layout algorithm.
In order to communicate the frame size and alignment to later passes,
I needed to set align+dereferenceable attributes on the frame-pointer
parameter of the resume function. This is clearly the right thing to
do, but the align attribute currently seems to result in assumptions
being added during inlining that the optimizer cannot easily remove.
Summary:
Rename `succ_const_iterator` to `const_succ_iterator` and
`succ_const_range` to `const_succ_range` for consistency with the
predecessor iterators, and the corresponding iterators in
MachineBasicBlock.
Reviewers: nicholas, dblaikie, nlewycky
Subscribers: hiraditya, bmahjour, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75952
This patch integrates operand bundle llvm.assumes [0] with the
Attributor. Most IRAttributes will now look at uses of the associated
value and if there are llvm.assume operand bundle uses with the right
tag we will check if they are in the must-be-executed-context (around
the context instruction). Droppable users, which is currently only
llvm::assume, are handled special in some places now as well.
[0] http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D74888
These intrinsics take a v4i32/v4f32 input and are supposed to
broadcast elements 0 and 1. Instead the autoupgrade code was
broadcasting elements 0, 1, 2, and 3.
I could fix the autoupgrade, but since its been broken for years
it seemed better just to steer anyone still trying to use it away
completely.
The initial implementation just delegates to APInt's implementation of
XOR for single element ranges and conservatively returns the full set
otherwise.
Reviewers: nikic, spatel, lebedev.ri
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D76453
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
This is fixing up various places that use the implicit
TypeSize->uint64_t conversion.
The new overloads in MemoryLocation.h are already used in various places
that construct a MemoryLocation from a TypeSize, including MemorySSA.
(They were using the implicit conversion before.)
Differential Revision: https://reviews.llvm.org/D76249
When compiling
```
struct S {
float w;
};
void f(long w, long b);
void g(struct S s) {
int w = s.w;
f(w, w*4);
}
```
I get Assertion failed: ((!CombinedExpr || CombinedExpr->isValid()) && "Combined debug expression is invalid").
That's because we combine two epxressions that both end in DW_OP_stack_value:
```
(lldb) p Expr->dump()
!DIExpression(DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p Param.Expr->dump()
!DIExpression(DW_OP_constu, 4, DW_OP_mul, DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p CombinedExpr->isValid()
(bool) $0 = false
(lldb) p CombinedExpr->dump()
!DIExpression(4097, 32, 5, 4097, 64, 5, 16, 4, 30, 4097, 32, 5, 4097, 64, 5, 159, 159)
```
I believe that in this particular case combining two stack values is
safe, but I didn't want to sink the special handling into
DIExpression::append() because I do want everyone to think about what
they are doing.
Patch by Adrian Prantl.
Fixes PR45181.
rdar://problem/60383095
Differential Revision: https://reviews.llvm.org/D76164
Summary: Prevent InstCombine from removing llvm.assume for which the arguement is true when they have operand bundles with usefull information.
Reviewers: jdoerfert, nikic, lebedev.ri
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76147
According to LangRef for unordered atomic memory transfer intrinsics
"The first three arguments are the same as they are in the @llvm.memcpy intrinsic, with the added constraint that
len is required to be a positive integer multiple of the element_size. If len is not a positive integer multiple
of element_size, then the behaviour of the intrinsic is undefined."
So the len is not multiple of element size is just an undefined behavior and verifier should not complain about that
as undefined behavior is allowed in LLVM IR.
This change removes the verifier check for this condition
Reviewers: reames
Reviewed By: reames
Subscribers: dantrushin, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D76116
Summary:
This patch will filter attributes to only preserve those that are usefull.
In the case of NoAlias it is filtered out not because it isn't usefull
but because it is incorrect to preserve it as it is only valdi for the
duration of the function.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75828
Summary:
during inling Create and insert an llvm.assume with attributes to preserve them.
to prevent any changes for now generation of llvm.assume is under a flag disabled by default.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75825
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
Summary:
Do not iterate on scalable vector. Also do not return constant scalable vector
from ConstantInt::get().
Fix result type by using getElementCount() instead of getNumElements().
Reviewers: sdesmalen, efriedma, apazos, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73753
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
Summary: This patch adds the basic utilities to deal with dropable uses. dropable uses are uses that we rather drop than prevent transformations, for now they are limited to uses in llvm.assume.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: uenoku, lebedev.ri, mgorny, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73404
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
Summary: Add verification that operand bundles on an llvm.assume are well formed to the verify pass.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75269
This is part of PR44213 https://bugs.llvm.org/show_bug.cgi?id=44213
When importing (system) Clang modules, LLDB needs to know which SDK
(e.g., MacOSX, iPhoneSimulator, ...) they came from. While the sysroot
attribute contains the absolute path to the SDK, this doesn't work
well when the debugger is run on a different machine than the
compiler, and the SDKs are installed in different directories. It thus
makes sense to just store the name of the SDK instead of the absolute
path, so it can be found relative to LLDB.
rdar://problem/51645582
Differential Revision: https://reviews.llvm.org/D75646
Summary:
The change is to fix conflict value for metadata "Objective-C Garbage Collection" in the mix of swift and Objective-C bitcode.
The purpose is to provide the support of LTO for swift and Objective-C mixed project.
Reviewers: rjmccall, ahatanak, steven_wu
Reviewed By: rjmccall, steven_wu
Subscribers: manmanren, mehdi_amini, hiraditya, dexonsmith, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71219
Summary:
Assume bundles need to be usable by Analysis and Transforms/Utils isn't.
so this commit moves utilities to deal with asusme bundles to IR.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75618
Summary: Finding what information is know about a value from a use is generally useful and can be done quickly.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75616
This reverts commit 80d0a137a5, and the
follow on fix in 873c0d0786. It is
causing test failures after a multi-stage clang bootstrap. See
discussion on D73242 and D75201.
Previously we would also accept DISubprograms that matched in name
only, but this doesn't appear to be necessary any more.
I did a Full and Thin LTO build of Clang and it completed without a warning.
Differential Revision: https://reviews.llvm.org/D75213
in C++ templates."
This was reverted in 802b22b5c8 due to
missing .bc file and a chromium bot failure.
https://bugs.chromium.org/p/chromium/issues/detail?id=1057559#c1
This revision address both of them.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
The Bitcode/DITemplateParameter-5.0.ll test is failing:
FAIL: LLVM :: Bitcode/DITemplateParameter-5.0.ll (5894 of 36324)
******************** TEST 'LLVM :: Bitcode/DITemplateParameter-5.0.ll' FAILED ********************
Script:
--
: 'RUN: at line 1'; /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/llvm-dis -o - /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll.bc | /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/FileCheck /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll
--
Exit Code: 2
Command Output (stderr):
--
It looks like the Bitcode/DITemplateParameter-5.0.ll.bc file was never checked in.
This reverts commit c2b437d53d.
in C++ templates.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
Lots of headers pass around MemoryBuffer objects, but very few open
them. Let those that do include FileSystem.h.
Saves ~250 includes of Chrono.h & FileSystem.h:
$ diff -u thedeps-before.txt thedeps-after.txt | grep '^[-+] ' | sort | uniq -c | sort -nr
254 - ../llvm/include/llvm/Support/FileSystem.h
253 - ../llvm/include/llvm/Support/Chrono.h
237 - ../llvm/include/llvm/Support/NativeFormatting.h
237 - ../llvm/include/llvm/Support/FormatProviders.h
192 - ../llvm/include/llvm/ADT/StringSwitch.h
190 - ../llvm/include/llvm/Support/FormatVariadicDetails.h
...
This requires duplicating the file_t typedef, which is unfortunate. I
sunk the choice of mapping mode down into the cpp file using variable
template specializations instead of class members in headers.
This removes everything but int_x86_avx512_mask_vcvtph2ps_512 which provides the SAE variant, but even this can use the fpext generic if the rounding control is the default.
Differential Revision: https://reviews.llvm.org/D75162
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
This allows for diagnosing malformed LLVM IR debug info metadata such
as the one in the testcase.
<rdar://problem/59756060>
Differential Revision: https://reviews.llvm.org/D75212
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
Previously we emitted an fmadd and a fmadd+fneg and combined them with a shufflevector. But this doesn't follow the correct exception behavior for unselected elements so the backend can't merge them into the fmaddsub/fmsubadd instructions.
This patch restores the the fmaddsub intrinsics so we don't have two arithmetic operations. We lose out on optimization opportunity in the non-strict FP case, but I don't think this is a big loss. If someone gives us a test case we can look into adding instcombine/dagcombine improvements. I'd rather not have the frontend do completely different things for strict and non-strict.
This still has problems because target specific intrinsics don't support strict semantics yet. We also still have all of the problems with masking. But we at least generate the right instruction in constrained mode now.
Differential Revision: https://reviews.llvm.org/D74268
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978, but this is an IR
change first because we already have fairly thorough tests in place
here.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
Differential Revision: https://reviews.llvm.org/D74713
Some IRBuilder methods that were originally defined on
IRBuilderBase do not respect custom IRBuilder inserters/folders,
because those were not accessible prior to D73835. Fix this by
making use of existing (and now accessible) IRBuilder methods,
which will handle inserters/folders correctly.
There are some changes in OpenMP and Instrumentation tests, where
bitcasts now get constant folded. I've also highlighted one
InstCombine test which now finishes in two rather than three
iterations, thanks to new instructions being inserted into the
worklist.
Differential Revision: https://reviews.llvm.org/D74787
Some IRBuilder methods that were originally defined on
IRBuilderBase do not respect custom IRBuilder inserters/folders,
because those were not accessible prior to D73835. Fix this by
making use of existing (and now accessible) IRBuilder methods,
which will handle inserters/folders correctly.
There are some changes in OpenMP tests, where bitcasts now get
constant folded. I've also highlighted one InstCombine test which
now finishes in two rather than three iterations, thanks to new
instructions being inserted into the worklist.
Differential Revision: https://reviews.llvm.org/D74787
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
Relative to the original commit, this fixes some warnings,
and is based on the deletion of the IRBuilder copy constructor
in D74693. The automatic copy constructor would no longer be
safe.
-----
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
D73835 will make IRBuilder no longer trivially copyable. This patch
deletes the copy constructor in advance, to separate out the breakage.
Currently, the IRBuilder copy constructor is usually used by accident,
not by intention. In rG7c362b25d7a9 I've fixed a number of cases where
functions accepted IRBuilder rather than IRBuilder &, thus performing
an unnecessary copy. In rG5f7b92b1b4d6 I've fixed cases where an
IRBuilder was copied, while an InsertPointGuard should have been used
instead.
The only non-trivial use of the copy constructor is the
getIRBForDbgInsertion() helper, for which I separated construction and
setting of the insertion point in this patch.
Differential Revision: https://reviews.llvm.org/D74693
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Summary:
Reenables importing of constants by default, which was disabled in
D73724 due to excessive thin link times. These inefficiencies were
fixed in D73851.
I re-measured thin link times for a number of binaries that had compile
time explosions with importing of constants previously and confirmed
they no longer have any notable increases with it enabled.
Reviewers: wmi, evgeny777
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74512
This restores commit 748bb5a0f1, along
with a fix for a Chromium test suite build issue (and a new test for
that case).
Differential Revision: https://reviews.llvm.org/D73242
Summary:
When Function is destroyed, GlobalValue base class is destroyed, then
Value destructor would call use_empty, which ultimately attempts to
downcast 'this' to GlobalValue. This is UB, and is caught my MSAN as
accessing uninitialized memory.
Call materialized_use_empty, which doesn't call
assertModuleIsMaterializedImpl().
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74161
Patch by Antonio Maiorano.
Do not iterate on scalable vector type in BitCastConstantVector.
Continuation work of D70985, D71147.
Support for folding bitcast into splat value is kept in D74095, as
it depends on D71637.
Differential Revision: https://reviews.llvm.org/D71389
Summary:
Currently type test assume sequences inserted for devirtualization are
removed during WPD. This patch delays their removal until later in the
optimization pipeline. This is an enabler for upcoming enhancements to
indirect call promotion, for example streamlined promotion guard
sequences that compare against vtable address instead of the target
function, when there are small number of possible vtables (either
determined via WPD or by in-progress type profiling). We need the type
tests to correlate the callsites with the address point offset needed in
the compare sequence, and optionally to associated type summary info
computed during WPD.
This depends on work in D71913 to enable invocation of LowerTypeTests to
drop type test assume sequences, which will now be invoked following ICP
in the ThinLTO post-LTO link pipelines, and also after the existing
export phase LowerTypeTests invocation in regular LTO (which is already
after ICP). We cannot simply move the existing import phase
LowerTypeTests pass later in the ThinLTO post link pipelines, as the
comment in PassBuilder.cpp notes (it must run early because when
performing CFI other passes may disturb the sequences it looks for).
This necessitated adding a new type test resolution "Unknown" that we
can use on the type test assume sequences previously removed by WPD,
that we now want LTT to ignore.
Depends on D71913.
Reviewers: pcc, evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
ClangBuildAnalyzer results show that a lot of time is spent
instantiating AnalysisManager::getResultImpl across the code base:
**** Templates that took longest to instantiate:
50445 ms: llvm::AnalysisManager<llvm::Function>::getResultImpl (412 times, avg 122 ms)
47797 ms: llvm::AnalysisManager<llvm::Function>::getResult<llvm::TargetLibraryAnalysis> (389 times, avg 122 ms)
46894 ms: std::tie<const unsigned long long, const bool> (2452 times, avg 19 ms)
43851 ms: llvm::BumpPtrAllocatorImpl<llvm::MallocAllocator, 4096, 4096>::Allocate (3228 times, avg 13 ms)
33911 ms: std::tie<const unsigned int, const unsigned int, const unsigned int, const unsigned int> (897 times, avg 37 ms)
33854 ms: std::tie<const unsigned long long, const unsigned long long> (1897 times, avg 17 ms)
27886 ms: std::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string (11156 times, avg 2 ms)
I mentioned this result to @chandlerc, and he suggested this direction.
AnalysisManager is already explicitly instantiated, and getResultImpl
doesn't need to be inlined. Move the definition to an Impl header, and
include that header in files that explicitly instantiate
AnalysisManager. There are only four (real) IR units:
- function
- module
- loop
- cgscc
Looking at a specific transform (ArgumentPromotion.cpp), here are three
compilations before & after this change:
BEFORE:
$ for i in $(seq 3) ; do ./ccit.bat ; done
peak memory: 258.15MB
real: 0m6.297s
peak memory: 257.54MB
real: 0m5.906s
peak memory: 257.47MB
real: 0m6.219s
AFTER:
$ for i in $(seq 3) ; do ./ccit.bat ; done
peak memory: 235.35MB
real: 0m5.454s
peak memory: 234.72MB
real: 0m5.235s
peak memory: 234.39MB
real: 0m5.469s
The 20MB of memory saved seems real, and the time improvement seems like
it is there.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73817
Summary:
* Most of the simplifications in SimplifyShuffleVectorInst depend on the
concrete value of, or the length of the mask vector. For scalable
vectors, this cannot be known at compile time.
** for these tests, detect if the vector is scalable before attempting
the transformation
* The functions ShuffleVectorInst::getMaskValue and
ShuffleVectorInst::getShuffleMask access the value of the constant mask.
However, since the length of the mask is unknown at compile time, these
function do not work for scalable vectors. Add asserts to ensure that
the input mask is not scalable
Reviewers: efriedma, sdesmalen, apazos, chrisj, huihuiz
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73555
Fix attempt
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this patch makes tablegen generate llvm attributes in a more generic and simpler (at least to me).
changes: make tablegen generate
...
ATTRIBUTE_ENUM(Alignment,align)
ATTRIBUTE_ENUM(AllocSize,allocsize)
...
which can be used to generate most of what was previously used and more.
Tablegen was also generating attributes from 2 identical files leading to identical output. so I removed one of them and made user use the other.
Reviewers: jdoerfert, thakis, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72455
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this patch makes tablegen generate llvm attributes in a more generic and simpler (at least to me).
changes: make tablegen generate
...
ATTRIBUTE_ENUM(Alignment,align)
ATTRIBUTE_ENUM(AllocSize,allocsize)
...
which can be used to generate most of what was previously used and more.
Tablegen was also generating attributes from 2 identical files leading to identical output. so I removed one of them and made user use the other.
Reviewers: jdoerfert, thakis, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72455
Summary: With the new pass manager, it is not possible to obtain a pointer to the pass.
Reviewers: jfb, rinon, yln
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73390
First attempt at implementing -fsemantic-interposition.
Rely on GlobalValue::isInterposable that already captures most of the expected
behavior.
Rely on a ModuleFlag to state whether we should respect SemanticInterposition or
not. The default remains no.
So this should be a no-op if -fsemantic-interposition isn't used, and if it is,
isInterposable being already used in most optimisation, they should honor it
properly.
Note that it only impacts architecture compiled with -fPIC and no pie.
Differential Revision: https://reviews.llvm.org/D72829
Summary:
Similar to issue D71445. Scalable vector should not be evaluated element by element.
Add support to handle scalable vector UndefValue.
Reviewers: sdesmalen, efriedma, apazos, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73678
Summary:
Disable the always importing of constants introduced in D70404 by
default under a new internal option, since it is causing order of
magnitude compile time regressions during the thin link. Will continue
investigating why the regressions occur.
Reviewers: evgeny777, wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73724
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
This behavior appears to have changed unintentionally in
b0e979724f.
Instead of printing the leading newline in printFunction, print it when
printing a module. This ensures that `OS << *Func` starts printing
immediately on the current line, but whole modules are printed nicely.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73505
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
Summary: masked_load and masked_store instructions require the alignment to be specified and a power of two. It seems to me that this requirement applies to masked_gather and masked_scatter as well.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73179
StringMap.h is very popular (4K uses), and it doesn't need to see
BumpPtrAllocator, which is relatively expensive according to
ClangBuildAnalyzer. StringMap only needs MallocAllocator, so split that
into AllocatorBase.h and use it instead.
Here is the change in header uses:
$ diff -u thedeps-before.txt thedeps-after.txt | \
grep '^[-+] ' | sort | uniq -c | sort -nr
3993 + ../llvm/include/llvm/Support/AllocatorBase.h
758 - ../llvm/include/llvm/Support/Allocator.h
270 - ../llvm/include/llvm/Support/Alignment.h
13 - ../llvm/include/llvm/Support/Host.h
6 - ../llvm/include/llvm/ADT/StringMap.h
4 - ../llvm/include/llvm/Support/SwapByteOrder.h
4 - ../llvm/include/llvm/Support/MathExtras.h
4 - ../llvm/include/llvm/Support/AlignOf.h
4 - ../llvm/include/llvm/ADT/SmallVector.h
1 - ../llvm/include/llvm/Support/PointerLikeTypeTraits.h
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73392
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Similar to the function attribute `prefix` (prefix data),
"patchable-function-prefix" inserts data (M NOPs) before the function
entry label.
-fpatchable-function-entry=2,1 (1 NOP before entry, 1 NOP after entry)
will look like:
```
.type foo,@function
.Ltmp0: # @foo
nop
foo:
.Lfunc_begin0:
# optional `bti c` (AArch64 Branch Target Identification) or
# `endbr64` (Intel Indirect Branch Tracking)
nop
.section __patchable_function_entries,"awo",@progbits,get,unique,0
.p2align 3
.quad .Ltmp0
```
-fpatchable-function-entry=N,0 + -mbranch-protection=bti/-fcf-protection=branch has two reasonable
placements (https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01185.html):
```
(a) (b)
func: func:
.Ltmp0: bti c
bti c .Ltmp0:
nop nop
```
(a) needs no additional code. If the consensus is to go for (b), we will
need more code in AArch64BranchTargets.cpp / X86IndirectBranchTracking.cpp .
Differential Revision: https://reviews.llvm.org/D73070
Summary:
Second patch in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
Summarize vcall_visibility metadata in ThinLTO global variable summary.
Depends on D71907.
Reviewers: pcc, evgeny777, steven_wu
Subscribers: mehdi_amini, Prazek, inglorion, hiraditya, dexonsmith, arphaman, ostannard, llvm-commits, cfe-commits, davidxl
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71911
Summary:
I initially encountered those assertions when trying to create
this IR `alignment` attribute from clang's `__attribute__((assume_aligned(imm)))`,
because until D72994 there is no sanity checking for the value of `imm`.
But even then, we have `llvm::Value::MaximumAlignment` constant (which is `536870912`),
which is enforced for clang attributes, and then there are some other magical constant
(`0x40000000` i.e. `1073741824` i.e. `2 * 536870912`) in
`Attribute::getWithAlignment()`/`AttrBuilder::addAlignmentAttr()`.
I strongly suspect that `0x40000000` is incorrect,
and that also should be `llvm::Value::MaximumAlignment`.
Reviewers: erichkeane, hfinkel, jdoerfert, gchatelet, courbet
Reviewed By: erichkeane
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D72998
Summary:
First patch to support Safe Whole Program Devirtualization Enablement,
see RFC here: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
Always emit !vcall_visibility metadata under -fwhole-program-vtables,
and not just for -fvirtual-function-elimination. The vcall visibility
metadata will (in a subsequent patch) be used to communicate to WPD
which vtables are safe to devirtualize, and we will optionally convert
the metadata to hidden visibility at link time. Subsequent follow on
patches will help enable this by adding vcall_visibility metadata to the
ThinLTO summaries, and always emit type test intrinsics under
-fwhole-program-vtables (and not just for vtables with hidden
visibility).
In order to do this safely with VFE, since for VFE all vtable loads must
be type checked loads which will no longer be the case, this patch adds
a new "Virtual Function Elim" module flag to communicate to GlobalDCE
whether to perform VFE using the vcall_visibility metadata.
One additional advantage of using the vcall_visibility metadata to drive
more WPD at LTO link time is that we can use the same mechanism to
enable more aggressive VFE at LTO link time as well. The link time
option proposed in the RFC will convert vcall_visibility metadata to
hidden (aka linkage unit visibility), which combined with
-fvirtual-function-elimination will allow it to be done more
aggressively at LTO link time under the same conditions.
Reviewers: pcc, ostannard, evgeny777, steven_wu
Subscribers: mehdi_amini, Prazek, hiraditya, dexonsmith, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71907
Summary:
New `@test13` in `Attributor/align.ll` is the main motivation - `null` pointer
really does not limit our alignment knowledge, in fact it is fully aligned
since it has no bits set.
Here we don't special-case `null` pointer because it is somewhat controversial
to add one more place where we enforce that `null` pointer is zero,
but instead we do the more general thing of trying to perform constant-fold
of pointer constant to an integer, and perform alignment inferrment on that.
Reviewers: jdoerfert, gchatelet, courbet, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, arphaman, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73131
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, nicolasvasilache
Subscribers: hiraditya, jfb, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, csigg, arpith-jacob, mgester, lucyrfox, herhut, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73041
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Blindly following unique-successors chain appeared to be a bad idea.
In a degenerate case when block jumps to itself that goes into endless loop.
Discovered this problem when playing with additional changes,
managed to reproduce it on existing LoopPredication code.
Fix by checking a "visited" set while iterating through unique successors.
Reviewed By: skatkov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72908
We lifted this code from InstCombine for general usage in:
rL369842
...but it's not safe as-is. There are no existing users that can
trigger this bug, but I discovered it via crashing several
regression tests when trying to use it for select folding in
InstSimplify.
ICmp requires (vector) integer types, so give up on anything that's
not integer or FP (pointers and ?) then bitcast the constants
before trying the match. That matches the definition of "equal or
undef" that I was looking for. If someone wants an FP-aware version
of equality (deal with NaN, -0.0), that could be a different mode
or different function.
Differential Revision: https://reviews.llvm.org/D72784
Summary:
In July 21 2010 `llvm::NamedMDNode` was refactored such that it would no
longer subclass `llvm::Value`:
https://github.com/llvm/llvm-project/commit/2637cc1a38d7336ea30caf
As part of this change, a map type from metadata names to their named
metadata, `llvm::MDSymbolTable`, was deleted. In its place, the type
of member `llvm::Module::NamedMDSymTab` was changed, from
`llvm::MDSymbolTable` to `void *`. The underlying memory allocations
for this pointer were changed to `new StringMap<NamedMDNode *>()`.
However, as far as I can tell, there's no need for obscuring the
underlying type being pointed to by the `void *`, and no need for
static casts from `void *` to `StringMap`. In fact, I don't think
there's a need for explicit calls to `new` and `delete` at all.
This commit changes `NamedMDSymTab` from a pointer to a reference, which
automatically couples its lifetime with the lifetime of its owning
`llvm::Module` instance, thus removing the explicit calls to `new` and
`delete` in the `llvm::Module` constructor and destructor. It also
changes the type from `void *` to a newly defined `NamedMDSymTabType`,
and removes the static casts.
Test Plan:
An ASAN-enabled build and run of `check-all` succeeds with this change
(aside from some tests that always fail for me in ASAN for some reason,
such as `check-clang` `SemaTemplate/stack-exhaustion.cpp`).
Reviewers: aprantl, dblaikie, chandlerc, pcc, echristo
Reviewed By: dblaikie
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72812
It appears to be rather useful when analyzing Loops with multiple
deoptimizing exits, perhaps merged ones.
For now it is used in LoopPredication, will be adding more uses
in other loop passes.
Reviewers: asbirlea, fhahn, skatkov, spatel, reames
Reviewed By: reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72754
Factor out the logic needed to update debug locations contained within
MD_loop metadata.
This refactor is preparation for a future change that also needs to
rewrite MD_loop metadata.
rdar://45507940
This patch imports constant variables even when they can't be internalized
(which results in promotion). This offers some extra constant folding
opportunities.
Differential revision: https://reviews.llvm.org/D70404
There's only one user of this API currently, and it seems
impossible that it would compare values with different types.
But that's not true in general, so we need to make sure the
types are the same.
As denoted by the FIXME comments, we will also crash on FP
values. That's what brought me here, but we can make that a
follow-up patch.
We were upgrading it to faddp, but a version taking two type parameters instead
of one. This then got upgraded a second time to the version with just one
parameter, but occasionally (for reasons I don't understand) this unusual
two-stage process corrupted a use-list, leading to a crash when the two faddp
declarations didn't match.
The Linux kernel uses -fpatchable-function-entry to implement DYNAMIC_FTRACE_WITH_REGS
for arm64 and parisc. GCC 8 implemented
-fpatchable-function-entry, which can be seen as a generalized form of
-mnop-mcount. The N,M form (function entry points before the Mth NOP) is
currently only used by parisc.
This patch adds N,0 support to AArch64 codegen. N is represented as the
function attribute "patchable-function-entry". We will use a different
function attribute for M, if we decide to implement it.
The patch reuses the existing patchable-function pass, and
TargetOpcode::PATCHABLE_FUNCTION_ENTER which is currently used by XRay.
When the integrated assembler is used, __patchable_function_entries will
be created for each text section with the SHF_LINK_ORDER flag to prevent
--gc-sections (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93197) and
COMDAT (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93195) issues.
Retrospectively, __patchable_function_entries should use a PC-relative
relocation type to avoid the SHF_WRITE flag and dynamic relocations.
"patchable-function-entry"'s interaction with Branch Target
Identification is still unclear (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424 for GCC discussions).
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72215
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
Summary:
Remove the restrictions that preventing "asm goto" from returning non-void
values. The values returned by "asm goto" are only valid on the "fallthrough"
path.
Reviewers: jyknight, nickdesaulniers, hfinkel
Reviewed By: jyknight, nickdesaulniers
Subscribers: rsmith, hiraditya, llvm-commits, cfe-commits, craig.topper, rnk
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69876
Attribute::getAsString doesn't have enough information to print anonymous
Module-level types correctly, so they come back as "%type 0xabcd". This results
in broken IR when printing as text.
Instead, print type-attributes (currently just byval) using the TypePrinting
infrastructure available in AsmWriter. This only applies to function argument
attributes.
Summary:
Make `AAMDNodes`' `getAAMetadata()` and `setAAMetadata()` to take `!tbaa.struct`
into account as well as `!tbaa`. This impacts llvm.org/pr42022.
This is a temprorary fix needed to keep `!tbaa.struct` tag by SROA pass.
New field `TBAAStruct` should be deleted when `!tbaa` tag replaces `!tbaa.struct`.
Merging two `!tbaa.struct`'s to one is conservatively considered to be `nullptr`
(giving `MayAlias`) -- this could be enhanced, but relying on the said future
replacement.
Reviewers: RKSimon, spatel, vporpo
Subscribers: hiraditya, kosarev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70924
This is the second step after D67871 to make use of abstract call sites.
In this patch the argument we associate with a abstract call site
argument can be the one in the callback callee instead of the one in the
callback broker.
Caveat: We cannot allow no-alias arguments for problematic callbacks:
As described in [1], adding no-alias (or restrict) to arguments could
break synchronization as the synchronization effect, e.g., a barrier,
does not "alias" with the pointer anymore. This disables no-alias
annotation for potentially problematic arguments until we implement the
fix described in [1].
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68008
[1] Compiler Optimizations for OpenMP, J. Doerfert and H. Finkel,
International Workshop on OpenMP 2018,
http://compilers.cs.uni-saarland.de/people/doerfert/par_opt18.pdf
D56351 (included in LLVM 8.0.0) introduced "frame-pointer". All tests
which use "no-frame-pointer-elim" or "no-frame-pointer-elim-non-leaf"
have been migrated to use "frame-pointer".
Implement UpgradeFramePointerAttributes to upgrade the two obsoleted
function attributes for bitcode. Their semantics are ignored.
Differential Revision: https://reviews.llvm.org/D71863
We returning a full set, we should use ResultBitWidth. Otherwise we might
it assertions when the resulting constant ranges are used later on.
Reviewers: nikic, spatel, reames
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D71937
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
This avoids unneeded copies when using a range-based for loops.
This avoids new warnings due to D68912 adds -Wrange-loop-analysis to -Wall.
Differential Revision: https://reviews.llvm.org/D70870
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
Summary:
This is a resubmit of D71473.
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: aaron.ballman, courbet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71547
Summary:
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71473
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
There are a few places that check specific string attributes have
particular values, and assert if they are something else. The verifier
should catch these kinds of cases.
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
Don't try to fold away shuffles which can't be folded. Fix creation of
shufflevector constant expressions.
Differential Revision: https://reviews.llvm.org/D71147
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
Summary:
Add an option to allow the attribute propagation on the index to be
disabled, to allow a workaround for issues (such as that fixed by
D70977).
Also move the setting of the WithAttributePropagation flag on the index
into propagateAttributes(), and remove some old stale code that predated
this flag and cleared the maybe read/write only bits when we need to
disable the propagation (previously only when importing disabled, now
also when the new option disables it).
Reviewers: evgeny777, steven_wu
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70984
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
The DebugVariable class is a class declared in LiveDebugValues.cpp which
is used to uniquely identify a single variable, using its source
variable, inline location, and fragment info to do so. This patch moves
this class into DebugInfoMetadata.h, making it available in a much
broader scope.
This revision is revised to update Go-bindings and Release Notes.
The original commit message follows.
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
This replaces the A32 NEON vqadds, vqaddu, vqsubs and vqsubu intrinsics
with the target independent sadd_sat, uadd_sat, ssub_sat and usub_sat.
This helps generate vqadds from standard IR nodes, which might be
produced from the vectoriser. The old variants are removed in the
process.
Differential Revision: https://reviews.llvm.org/D69350
DIExpressions with shift operators should not be fragmented for the same
reason as arithmetic operators: carry over cannot be expressed from one
fragment to the other, so an invalid result would be produced.
Differential Revision: https://reviews.llvm.org/D70601
This saves 2.4% of CPU time compiling opt, according to
ClangBuildAnalyzer. These helpers being inlined in the header was
triggering the instantiation of concat_iterator in every TU using
Module.h (~1118 TUs): https://reviews.llvm.org/P8171$35
**** Templates that took longest to instantiate:
76187 ms: llvm::AnalysisManager<llvm::Function>::getResult<llvm::TargetLibrary... (396 times, avg 192 ms)
73609 ms: llvm::AnalysisManager<llvm::Function>::getResultImpl (420 times, avg 175 ms)
49657 ms: llvm::detail::concat_range<llvm::GlobalValue, llvm::iterator_range<l... (1118 times, avg 44 ms)
49376 ms: llvm::detail::concat_range<const llvm::GlobalValue, llvm::iterator_r... (1118 times, avg 44 ms)
48167 ms: llvm::iterator_range<llvm::concat_iterator<llvm::GlobalValue, llvm::... (1118 times, avg 43 ms)
48125 ms: llvm::iterator_range<llvm::concat_iterator<const llvm::GlobalValue, ... (1118 times, avg 43 ms)
48061 ms: llvm::concat_iterator<llvm::GlobalValue, llvm::ilist_iterator<llvm::... (1118 times, avg 42 ms)
48014 ms: llvm::concat_iterator<const llvm::GlobalValue, llvm::ilist_iterator<... (1118 times, avg 42 ms)
...
I haven't measured, but I don't think these helpers are performance
critical. The iterator advance call can still be inlined, which is what
matters for performance.
Remove global_(objects|values)_(begin|end), since they were dead and
would have to be out of line anyway.
Summary:
Revert "Rollback of commit "Repress sanitization on User dtor.""
There is no point in keeping an active MSan error in the codebase.
PR24578 tracks the actual UB in LLVM code; this change enables testing
of LLVM with MSAN + -fsanitize-memory-use-after-dtor.
This reverts commit 21c1bc46ae.
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70611
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
Summary:
Also, replace the SmallVector with a normal C array.
Reviewers: vsk
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70498
This is recommit of commit e6584b2b7b, which was reverted in
30e7ee3c4b together with af57dbf12e.
Original message is below.
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.
This change moves these definitioins to the namespace llvm::fp.
No functional changes.
Differential Revision: https://reviews.llvm.org/D69552
Summary
In several places we need to enumerate all constrained intrinsics or IR
nodes that should be represented by them. It is easy to miss some of
the cases. To make working with these intrinsics more convenient and
robust, this change introduces file containing definitions of all
constrained intrinsics and some of their properties. This file can be
included to generate constrained intrinsics processing code.
Reviewers: kpn, andrew.w.kaylor, cameron.mcinally, uweigand
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69887
Summary: The earlier commit (https://reviews.llvm.org/D70014) missed this one : If Always_Inline happens to be the only entry in FuncFlags, then the assembler will not print it in the summary.
Patch by Bharathi Seshadri <bseshadr@cisco.com>
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70323
and a follow-up NFC rearrangement as it's causing a crash on valid. Testcase is on the original review thread.
This reverts commits af57dbf12e and e6584b2b7b
Currently we miss folds with undef and identity values for binary ops
that do not fold to undef in general.
We can generalize the identity simplifications and do them before
checking for undef in particular.
Alive checks:
* OR - https://rise4fun.com/Alive/8OsK
* AND - https://rise4fun.com/Alive/e3tE
This will also allow us to remove some now redundant cases throughout
the function, but I would like to do this as follow-up. That should make
tracking down potential issues easier.
Reviewers: spatel, RKSimon, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D70169
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.
This change moves these definitioins to the namespace llvm::fp.
No functional changes.
Differential Revision: https://reviews.llvm.org/D69552
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
getAsInstruction is the only non-const member method.
It is impossible to enforce const-correctness because of it.
Reviewers: jmolloy, majnemer
Reviewed By: jmolloy
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70113
Summary:
This patch redefines freeze instruction from being UnaryOperator to a subclass of UnaryInstruction.
ConstantExpr freeze is removed, as discussed in the previous review.
FreezeOperator is not added because there's no ConstantExpr freeze.
`freeze i8* null` test is added to `test/Bindings/llvm-c/freeze.ll` as well, because the null pointer-related bug in `tools/llvm-c/echo.cpp` is now fixed.
InstVisitor has visitFreeze now because freeze is not unaryop anymore.
Reviewers: whitequark, deadalnix, craig.topper, jdoerfert, lebedev.ri
Reviewed By: craig.topper, lebedev.ri
Subscribers: regehr, nlopes, mehdi_amini, hiraditya, steven_wu, dexonsmith, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69932
Summary: A user can force a function to be inlined by specifying the always_inline attribute. Currently, thinlto implementation is not aware of always_inline functions and does not guarantee import of such functions, which in turn can prevent inlining of such functions.
Patch by Bharathi Seshadri <bseshadr@cisco.com>
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70014
Patch enables import of write-only variables with non-trivial initializers
to fix linker errors. Initializers of imported variables are converted to
'zeroinitializer' to avoid promotion of referenced objects.
Differential revision: https://reviews.llvm.org/D70006
ShuffleVectorInst::isExtractSubvectorMask, introduced in
[CostModel] Add SK_ExtractSubvector handling to getInstructionThroughput (PR39368)
erroneously thought that
%340 = shufflevector <4 x float> %339, <4 x float> undef, <3 x i32> <i32 2, i32 3, i32 undef>
is a subvector extract, even though it goes off the end of the parent
vector with the undef index. That then caused an assert in
BasicTTIImplBase::getExtractSubvectorOverhead.
This commit fixes that, by not considering the above a subvector
extract.
Differential Revision: https://reviews.llvm.org/D70005
Change-Id: I87b8b00b24bef19ffc9a1b82ef4eca3b8a246eaf
Summary:
To be used in `ConstantRange::mulWithNoOverflow()`,
may in future be useful for when saturating shift/mul ops are added.
These are precise as far as i can tell.
I initially though i will need `APInt::[us]mul_sat()` for these,
but it turned out much simpler to do what `ConstantRange::multiply()`
does - perform multiplication in twice the bitwidth, and then truncate.
Though here we want saturating signed truncation.
Reviewers: nikic, reames, spatel
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69994
Summary:
To be used in `ConstantRange::shlWithNoOverflow()`,
may in future be useful for when saturating shift/mul ops are added.
Unlike `ConstantRange::shl()`, these are precise.
Reviewers: nikic, spatel, reames
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69960
Summary: The 'BB->getParent()' pointer was utilized before it was verified against nullptr. Check lines: 3567, 3581.
Reviewers: jyknight, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69751
Patch allows importing declarations of functions and variables, referenced
by the initializer of some other readonly variable.
Differential revision: https://reviews.llvm.org/D69561
Summary:
When adjusting function entry counts after inlining, Funciton::setEntryCount is called without providing an import function list. The side effect of that is the previously set import function list will be dropped. The import function list is used by ThinLTO to help import hot cross module callee for LTO inlining, so dropping that during ThinLTO pre-link may adversely affect LTO inlining. The fix is to keep the list while updating entry counts for inlining.
Reviewers: wmi, davidxl, tejohnson
Subscribers: mehdi_amini, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69736
Summary:
Much like D67339, adds ConstantRange handling for
when we know no-wrap behavior of the `sub`.
Unlike addWithNoWrap(), we only get lucky re returning empty set
for signed wrap. For unsigned, we must perform overflow check manually.
A patch that makes use of this in LVI (CVP) to be posted later.
Reviewers: nikic, shchenz, efriedma
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69918
As discussed in https://reviews.llvm.org/D69918
that happens to work as intended, and returns empty set if
there is always an overflow because we get lucky with intersection.
Since there's now an explicit test for that, let's prefer cleaner code.
As noted in follow-up to:
rGa1e8ad4f2fa7
It's not safe to assume that an element of the constant is always
non-null. It's definitely not an expected case for the current
instcombine user, but that may not hold if this function is
eventually called from arbitrary places.
DIExpression::isImplicit() did not handle DW_OP_LLVM_fragment
correctly. It was scanning the elements in the expression by
iterating from the end. But we do not know the position of
ops unless we iterate from the beginning of the expression,
since DW_OP:s and their operands are stored flat in the expression
list. The old code also assumed that a DW_OP_LLVM_fragment
only occupied one element in the expression list, but it actually
occupies three elements.
If module pass uses on-demand function analyses then structure is being
displayed incorrectly because FunctionPassManagerImpl can't dump contained
FPPassManager instances.
Differential revision: https://reviews.llvm.org/D69315
Summary:
Delete the BasicBlockPass and BasicBlockManager, all its dependencies and update documentation.
The BasicBlockManager was improperly tested and found to be potentially broken, and was deprecated as of rL373254.
In light of the switch to the new pass manager coming before the next release, this patch is a first cleanup of the LegacyPassManager.
Reviewers: chandlerc, echristo
Subscribers: mehdi_amini, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69121
This should trigger a dereference before null-check warning,
but I don't see it when building with clang. In any case, the
current and known future users of this helper require non-null
args, so I'm converting the 'if' to an assert.
This fixes a minor oversight mentioned in the review of D69379:
we should push extractelement into the operands of getelementptr
regardless of whether that enables further folding.
Emit a remarks section by default for the following formats:
* bitstream
* yaml-strtab
while still providing -remarks-section=<bool> to override the defaults.
Summary:
Getelementptr has vector type if any of its operands are vectors
(the scalar operands being implicitly broadcast to all vector elements).
Extractelement applied to a vector getelementptr can be folded by
applying the extractelement in turn to all of the vector operands.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69379
Summary:
A new function pass (Transforms/CFGuard/CFGuard.cpp) inserts CFGuard checks on
indirect function calls, using either the check mechanism (X86, ARM, AArch64) or
or the dispatch mechanism (X86-64). The check mechanism requires a new calling
convention for the supported targets. The dispatch mechanism adds the target as
an operand bundle, which is processed by SelectionDAG. Another pass
(CodeGen/CFGuardLongjmp.cpp) identifies and emits valid longjmp targets, as
required by /guard:cf. This feature is enabled using the `cfguard` CC1 option.
Reviewers: thakis, rnk, theraven, pcc
Subscribers: ychen, hans, metalcanine, dmajor, tomrittervg, alex, mehdi_amini, mgorny, javed.absar, kristof.beyls, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65761
new functions are compatible before upgrading a function call to an
intrinsic call.
Sometimes users insert calls to ARC runtime functions that are not
compatible with the corresponding intrinsic functions (for example,
'i8* @objc_storeStrong' instead of 'void @objc_storeStrong'). Don't
upgrade those calls.
rdar://problem/56447127
Current implementation of Instruction::mayReadFromMemory()
returns !doesNotAccessMemory() which is !ReadNone. This
does not take into account that the writeonly attribute
also indicates that the call does not read from memory.
The patch changes the predicate to !doesNotReadMemory()
that reflects the intended behavior.
Differential Revision: https://reviews.llvm.org/D69086
llvm-svn: 375389
Summary:
If all the shifts amount are already poison-producing,
then we can add more poison-producing flags ontop:
https://rise4fun.com/Alive/Ocwi
Otherwise, we should only consider the possible range of shift amts that don't result in poison.
For unsigned range not not overflow, we must not shift out any set bits,
and the actual limit for `x` can be computed by backtransforming
the maximal value we could ever get out of the `shl` - `-1` through
`lshr`. If the `x` is any larger than that then it will overflow.
Likewise for signed range, but just in signed domain..
This is based on the general idea outlined by @nikic in https://reviews.llvm.org/D68672#1714990
Reviewers: nikic, sanjoy
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits, nikic
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69217
llvm-svn: 375370
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 375094
Summary:
Internally in LLVM's metadata we use DW_OP_entry_value operations with
the same semantics as DWARF; that is, its operand specifies the number
of bytes that the entry value covers.
At the time of emitting entry values we don't know the emitted size of
the DWARF expression that the entry value will cover. Currently the size
is hardcoded to 1 in DIExpression, and other values causes the verifier
to fail. As the size is 1, that effectively means that we can only have
valid entry values for registers that can be encoded in one byte, which
are the registers with DWARF numbers 0 to 31 (as they can be encoded as
single-byte DW_OP_reg0..DW_OP_reg31 rather than a multi-byte
DW_OP_regx). It is a bit confusing, but it seems like llvm-dwarfdump
will print an operation "correctly", even if the byte size is less than
that, which may make it seem that we emit correct DWARF for registers
with DWARF numbers > 31. If you instead use readelf for such cases, it
will interpret the number of specified bytes as a DWARF expression. This
seems like a limitation in llvm-dwarfdump.
As suggested in D66746, a way forward would be to add an internal
variant of DW_OP_entry_value, DW_OP_LLVM_entry_value, whose operand
instead specifies the number of operations that the entry value covers,
and we then translate that into the byte size at the time of emission.
In this patch that internal operation is added. This patch keeps the
limitation that a entry value can only be applied to simple register
locations, but it will fix the issue with the size operand being
incorrect for DWARF numbers > 31.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: aprantl
Subscribers: jyknight, fedor.sergeev, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67492
llvm-svn: 374881
Summary:
The guard for printing function flags in the summary was not checking
the NoInline flag.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68948
llvm-svn: 374802
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 374539
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Several LLVM tools write text files/streams without using OF_Text.
This can cause problems on platforms which distinguish between
text and binary output. This PR adds the OF_Text flag for the
following tools:
- llvm-dis
- llvm-dwarfdump
- llvm-mca
- llvm-mc (assembler files only)
- opt (assembler files only)
- RemarkStreamer (used e.g. by opt)
Reviewers: rnk, vivekvpandya, Bigcheese, andreadb
Differential Revision: https://reviews.llvm.org/D67696
llvm-svn: 374024
When the target option GuaranteedTailCallOpt is specified, calls with
the fastcc calling convention will be transformed into tail calls if
they are in tail position. This diff adds a new calling convention,
tailcc, currently supported only on X86, which behaves the same way as
fastcc, except that the GuaranteedTailCallOpt flag does not need to
enabled in order to enable tail call optimization.
Patch by Dwight Guth <dwight.guth@runtimeverification.com>!
Reviewed By: lebedev.ri, paquette, rnk
Differential Revision: https://reviews.llvm.org/D67855
llvm-svn: 373976
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
r369697 changed the behavior of stripPointerCasts to no longer include
aliases. However, the code in CGDeclCXX.cpp's createAtExitStub counted
on the looking through aliases to properly set the calling convention of
a call.
The result of the change was that the calling convention mismatch of the
call would be replaced with a llvm.trap, causing a runtime crash.
Differential Revision: https://reviews.llvm.org/D68584
llvm-svn: 373929
Earlier in the year intrinsics for lrint, llrint, lround and llround were
added to llvm. The constrained versions are now implemented here.
Reviewed by: andrew.w.kaylor, craig.topper, cameron.mcinally
Approved by: craig.topper
Differential Revision: https://reviews.llvm.org/D64746
llvm-svn: 373900
Summary:
This allows intrinsics such as the following to be defined:
- declare <n x 4 x i32> @llvm.something.nxv4f32(<n x 4 x i32>, <n x 4 x i1>, <n x 4 x float>)
...where <n x 4 x i32> is derived from <n x 4 x float>, but
the element needs bitcasting to int.
Reviewers: c-rhodes, sdesmalen, rovka
Reviewed By: c-rhodes
Subscribers: tschuett, hiraditya, jdoerfert, llvm-commits, cfe-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68021
llvm-svn: 373437
Goes a bit further than rL372743 which added the early out - elements should be Constant so use cast<Constant> instead (and rely on the assert if anything fails).
llvm-svn: 373321
Temporarily fix BaiscBlockManager based on the code in the other
managers.
Replacement of all uses of the BasicBlockPass to follow.
Resolves PR42264.
llvm-svn: 373235
atomicrmw and cmpxchg have a volatile flag, so allow them to be get and set with LLVM{Get,Set}Volatile. atomicrmw and fence have orderings, so allow them to be get and set with LLVM{Get,Set}Ordering. Add missing LLVMAtomicRMWBinOpFAdd and LLVMAtomicRMWBinOpFSub enum constants. AtomicCmpXchg also has a weak flag, add a getter/setter for that too. Add a getter/setter for the binary-op of an atomicrmw.
atomicrmw and cmpxchg have a volatile flag, so allow it to be set/get with LLVMGetVolatile and LLVMSetVolatile. Add missing LLVMAtomicRMWBinOpFAdd and LLVMAtomicRMWBinOpFSub enum constants. AtomicCmpXchg also has a weak flag, add a getter/setter for that too. Add a getter/setter for the binary-op of an atomicrmw.
Add LLVMIsA## for CatchSwitchInst, CallBrInst and FenceInst, as well as AtomicCmpXchgInst and AtomicRMWInst.
Update llvm-c-test to include atomicrmw and fence, and to copy volatile for the four applicable instructions.
Differential Revision: https://reviews.llvm.org/D67132
llvm-svn: 372938
Summary:
The list of indirect labels should ALWAYS have their blockaddresses as
argument operands to the callbr (but not necessarily the other way
around). Add an invariant that checks this.
The verifier catches a bad test case that was added recently in r368478.
I think that was a simple mistake, and the test was made less strict in
regards to the precise addresses (as those weren't specifically the
point of the test).
This invariant will be used to find a reported bug.
Link: https://www.spinics.net/lists/arm-kernel/msg753473.html
Link: https://github.com/ClangBuiltLinux/linux/issues/649
Reviewers: craig.topper, void, chandlerc
Reviewed By: void
Subscribers: ychen, lebedev.ri, javed.absar, kristof.beyls, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67196
llvm-svn: 372923
TypeAttributeImpl inherits from EnumAttributeImpl which already defines anchor() as a virtual, so we should override this instead of redeclaring it.
llvm-svn: 372877
Summary:
The Regex "match" and "sub" member functions were previously not "const"
because they wrote to the "error" member variable. This commit removes
those assignments, and instead assumes that the validity of the regex
is already known after the initial compilation of the regular
expression. As a result, these member functions were possible to make
"const". This makes it easier to do things like pre-compile Regexes
up-front, and makes "match" and "sub" thread-safe. The error status is
now returned as an optional output, which also makes the API of "match"
and "sub" more consistent with each other.
Also, some uses of Regex that could be refactored to be const were made const.
Patch by Nicolas Guillemot
Reviewers: jankratochvil, thopre
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67241
llvm-svn: 372764
The static analyzer is warning about a potential null dereference, but we should be able to use cast<Instruction> directly and if not assert will fire for us.
llvm-svn: 372758
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 372733
The static analyzer is warning about potential null dereferences, but we should be able to use cast<VectorType> directly and if not assert will fire for us.
llvm-svn: 372529
The insertion of an unconditional branch during FastISel can differ depending on
building with or without debug information. This happens because FastISel::fastEmitBranch
emits an unconditional branch depending on the size of the current basic block
without distinguishing between debug and non-debug instructions.
This patch fixes this issue by ignoring debug instructions when getting the size
of the basic block.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: ormris, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67703
llvm-svn: 372389
Summary:
Both match the type of another intrinsic parameter of a vector type, but where each element is subdivided to form a vector with more elements of a smaller type.
Subdivide2Argument allows intrinsics such as the following to be defined:
- declare <vscale x 4 x i32> @llvm.something.nxv4i32(<vscale x 8 x i16>)
Subdivide4Argument allows intrinsics such as:
- declare <vscale x 4 x i32> @llvm.something.nxv4i32(<vscale x 16 x i8>)
Tests are included in follow up patches which add intrinsics using these types.
Reviewers: sdesmalen, SjoerdMeijer, greened, rovka
Reviewed By: sdesmalen
Subscribers: rovka, tschuett, jdoerfert, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67549
llvm-svn: 372380
DIFlagBlockByRefStruct is an unused DIFlag that originally was used by
clang to express (Objective-)C block captures in debug info. For the
last year Clang has been emitting complex DIExpressions to describe
block captures instead, which makes all the code supporting this flag
redundant.
This patch removes the flag and all supporting "dead" code, so we can
reuse the bit for something else in the future.
Since this only affects debug info generated by Clang with the block
extension this mostly affects Apple platforms and I don't have any
bitcode compatibility concerns for removing this. The Verifier will
reject debug info that uses the bit and thus degrade gracefully when
LTO'ing older bitcode with a newer compiler.
rdar://problem/44304813
Differential Revision: https://reviews.llvm.org/D67453
llvm-svn: 372272
Summary:
Add function to AutoUpgrade to change the datalayout of old X86 datalayout strings.
This adds "-p270:32:32-p271:32:32-p272:64:64" to X86 datalayouts that are otherwise valid
and don't already contain it.
This also removes the compatibility changes in https://reviews.llvm.org/D66843.
Datalayout change in https://reviews.llvm.org/D64931.
Reviewers: rnk, echristo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67631
llvm-svn: 372267
The filename in the RemarkStreamer should be optional to allow clients
to stream remarks to memory or to existing streams.
This introduces a new overload of `setupOptimizationRemarks`, and avoids
enforcing the presence of a filename at different places.
llvm-svn: 372195
Summary:
Adds the following inline asm constraints for SVE:
- Upl: One of the low eight SVE predicate registers, P0 to P7 inclusive
- Upa: SVE predicate register with full range, P0 to P15
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, cameron.mcinally, greened, rengolin
Reviewed By: rovka
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66524
llvm-svn: 371967
We have been using -switch-inst-prof-update-wrapper-strict
set to true by default for some time. It is time to remove
the safety stuff and make SwitchInstProfUpdateWrapper
intolerant to inconsistencies in !prof branch_weights
metadata of SwitchInst.
This patch gets rid of the Invalid state of
SwitchInstProfUpdateWrapper and the option
-switch-inst-prof-update-wrapper-strict. So there is only
two states: changed and unchanged.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D67435
llvm-svn: 371707
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371635
This reverts commit r371584. It introduced a dependency from compiler-rt
to llvm/include/ADT, which is problematic for multiple reasons.
One is that it is a novel dependency edge, which needs cross-compliation
machinery for llvm/include/ADT (yes, it is true that right now
compiler-rt included only header-only libraries, however, if we allow
compiler-rt to depend on anything from ADT, other libraries will
eventually get used).
Secondly, depending on ADT from compiler-rt exposes ADT symbols from
compiler-rt, which would cause ODR violations when Clang is built with
the profile library.
llvm-svn: 371598
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371584
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371484
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
Summary:
There's an unspoken invariant of callbr that the list of BlockAddress
Constants in the "function args" list match the BasicBlocks in the
"other labels" list. (This invariant is being added to the LangRef in
https://reviews.llvm.org/D67196).
When modifying the any of the indirect destinations of a callbr
instruction (possible jump targets), we need to update the function
arguments if the argument is a BlockAddress whose BasicBlock refers to
the indirect destination BasicBlock being replaced. Otherwise, many
transforms that modify successors will end up violating that invariant.
A recent change to the arm64 Linux kernel exposed this bug, which
prevents the kernel from booting.
I considered maintaining a mapping from indirect destination BasicBlock
to argument operand BlockAddress, but this ends up being a one to
potentially many (though usually one) mapping. Also, the list of
arguments to a function (or more typically inline assembly) ends up
being less than 10. The implementation is significantly simpler to just
rescan the full list of arguments. Because of the one to potentially
many relationship, the full arg list must be scanned (we can't stop at
the first instance).
Thanks to the following folks that reported the issue and helped debug
it:
* Nathan Chancellor
* Will Deacon
* Andrew Murray
* Craig Topper
Link: https://bugs.llvm.org/show_bug.cgi?id=43222
Link: https://github.com/ClangBuiltLinux/linux/issues/649
Link: https://lists.infradead.org/pipermail/linux-arm-kernel/2019-September/678330.html
Reviewers: craig.topper, chandlerc
Reviewed By: craig.topper
Subscribers: void, javed.absar, kristof.beyls, hiraditya, llvm-commits, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67252
llvm-svn: 371262
Summary: Previously module pass printer pass prints the banner even when the module doesn't include any function provided with `-filter-print-funcs` option. This introduced a lot of noise, especailly with ThinLTO. This diff addresses the issue and makes the banner printed only when the module includes functions in `-filter-print-funcs` list.
Reviewers: fedor.sergeev
Subscribers: mehdi_amini, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66560
llvm-svn: 370849
This implements constrained floating point intrinsics for FP to signed and
unsigned integers.
Quoting from D32319:
The purpose of the constrained intrinsics is to force the optimizer to
respect the restrictions that will be necessary to support things like the
STDC FENV_ACCESS ON pragma without interfering with optimizations when
these restrictions are not needed.
Reviewed by: Andrew Kaylor, Craig Topper, Hal Finkel, Cameron McInally, Roman Lebedev, Kit Barton
Approved by: Craig Topper
Differential Revision: http://reviews.llvm.org/D63782
llvm-svn: 370228
With the introduction of the typed byval attribute change there was no
way that the LLVM-C API could create the correct class Attribute. If a
program that uses the C API creates a ByVal attribute and annotates a
function with that attribute LLVM will crash when it assembles or write
that module containing the function out as bitcode.
This change is a minimal fix to at least allow code to work, this is
because the byval change is on the 9.0 and I don't want to introduce new
LLVM-C API this late in the release cycle.
By Jakob Bornecrantz!
Differential revision: https://reviews.llvm.org/D66144
llvm-svn: 370176
Summary:
This patch adds support for scalable vectors in intrinsics, enabling
intrinsics such as the following to be defined:
declare <vscale x 4 x i32> @llvm.something.nxv4i32(<vscale x 4 x i32>)
Support for this is implemented by defining a new type descriptor for
scalable vectors and adding mangling support for scalable vector types
in the name mangling scheme used by 'any' types in intrinsic signatures.
Tests have been added for IRBuilder to test scalable vectors work as
expected when using intrinsics through this interface. This required
implementing an intrinsic that is explicitly defined with scalable
vectors, e.g. LLVMType<nxv4i32>, an SVE floating-point convert
intrinsic was used for this. The behaviour of the overloaded type
LLVMScalarOrSameVectorWidth with scalable vectors is tested using the
existing masked load intrinsic. Also added an .ll test to test the
Verifier catches a bad intrinsic argument when passing a fixed-width
predicate (mask) to the masked.load intrinsic where a scalable is
expected.
Patch by Paul Walker
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D65930
llvm-svn: 370053
Promoting it from InstCombine's tryToReuseConstantFromSelectInComparison().
Return true if this constant and a constant 'Y' are element-wise equal.
This is identical to just comparing the pointers, with the exception that
for vectors, if only one of the constants has an `undef` element in some
lane, the constants still match.
llvm-svn: 369842
Summary: Removes a not so useful function from DataLayout and cleans up Support/MathExtras.h
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66691
llvm-svn: 369824
I noticed another instance of the issue where references to aliases were
being replaced with aliasees, this time in InstCombine. In the instance that
I saw it turned out to be only a QoI issue (a symbol ended up being missing
from the symbol table due to the last reference to the alias being removed,
preventing HWASAN from symbolizing a global reference), but it could easily
have manifested as incorrect behaviour.
Since this is the third such issue encountered (previously: D65118, D65314)
it seems to be time to address this common error/QoI issue once and for all
and make the strip* family of functions not look through aliases.
Includes a test for the specific issue that I saw, but no doubt there are
other similar bugs fixed here.
As with D65118 this has been tested to make sure that the optimization isn't
load bearing. I built Clang, Chromium for Linux, Android and Windows as well
as the test-suite and there were no size regressions.
Differential Revision: https://reviews.llvm.org/D66606
llvm-svn: 369697
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary: This exposes `CallInst`'s tail call kind via new `LLVMGetTailCallKind` and `LLVMSetTailCallKind` functions. The motivation for this is to be able to see `musttail` for languages that require mandatory tail calls for correctness. Today only the weaker `LLVMSetTail` is exposed and there is no way to set `GuaranteedTailCallOpt` via the C API.
Reviewers: CodaFi, jyknight, deadalnix, rnk
Reviewed By: CodaFi
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66061
llvm-svn: 368945
Summary:
This is a tweak to r368311 and r368646 which auto upgrades the calls to
objc runtime functions to objc runtime intrinsics, in order to make sure
that the auto upgrader does not trigger with up-to-date bitcode.
It is possible for bitcode that is up-to-date to contain direct calls to
objc runtime function and those are not inserted by compiler as part of
ARC and they should not be upgraded. Now auto upgrader only triggers as
when the old style of ARC marker is used so it is guaranteed that it
won't trigger on update-to-date bitcode.
This also means it won't do this upgrade for bitcode from llvm-8 and
llvm-9, which preserves the behavior of those releases. Ideally they
should be upgraded as well but it is more important to make sure
AutoUpgrader will not trigger on up-to-date bitcode.
Reviewers: ahatanak, rjmccall, dexonsmith, pete
Reviewed By: dexonsmith
Subscribers: hiraditya, jkorous, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66153
llvm-svn: 368730
to intrinsic calls
This fixes a bug in r368311.
It turns out that the ARC runtime functions in the IR can have pointer
parameter types that are not i8* or i8**. Instead of RAUWing normal
functions with intrinsics, manually bitcast the arguments before passing
them to the intrinsic functions and bitcast the return value back to the
type of the original call instruction.
This recommits r368634, which was reverted in r368637. The loop in the
patch was iterating over uses of a function and deleting function calls
inside it, which caused bots to crash.
rdar://problem/54125406
Differential Revision: https://reviews.llvm.org/D66047
llvm-svn: 368646
to intrinsic calls
This fixes a bug in r368311.
It turns out that the ARC runtime functions in the IR can have pointer
parameter types that are not i8* or i8**. Instead of RAUWing normal
functions with intrinsics, manually bitcast the arguments before passing
them to the intrinsic functions and bitcast the return value back to the
type of the original call instruction.
rdar://problem/54125406
llvm-svn: 368634
the bitcode has the arm64 retainAutoreleasedReturnValue marker
The ARC middle-end passes stopped optimizing or transforming bitcode
that has been compiled with old compilers after we started emitting
calls to ARC runtime functions as intrinsic calls instead of normal
function calls in the front-end and made changes to teach the ARC
middle-end passes about those intrinsics (see r349534). This patch
converts calls to ARC runtime functions that are not intrinsic functions
to intrinsic function calls if the bitcode has the arm64
retainAutoreleasedReturnValue marker. Checking for the presence of the
marker is necessary to make sure we aren't changing ARC function calls
that were originally MRR message sends (see r349952).
rdar://problem/53280660
Differential Revision: https://reviews.llvm.org/D65902
llvm-svn: 368311
This patch turns on the prof branch_weights metadata consistency
check in SwitchInstProfUpdateWrapper.
If this patch causes a failure then please before reverting do report
the IR that hits the assertion and try identifying the pass that
introduces the inconsistency. We have to fix all such passes.
See also the upcoming change https://reviews.llvm.org/D61179
in the Verifier.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D64061
llvm-svn: 368129
This check is only meaningful for COFF and it is perfectly valid to create
such a GlobalValue in ELF.
Differential Revision: https://reviews.llvm.org/D65686
llvm-svn: 368094
For consistency with normal instructions and clarity when reading IR,
it's best to print the %0, %1, ... names of function arguments in
definitions.
Also modifies the parser to accept IR in that form for obvious reasons.
llvm-svn: 367755
Summary:
While there is always a `Value::replaceAllUsesWith()`,
sometimes the replacement needs to be conditional.
I have only cleaned a few cases where `replaceUsesWithIf()`
could be used, to both add test coverage,
and show that it is actually useful.
Reviewers: jdoerfert, spatel, RKSimon, craig.topper
Reviewed By: jdoerfert
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, aheejin, george.burgess.iv, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65528
llvm-svn: 367548
Add a new serializer, using a binary format based on the LLVM bitstream
format.
This format provides a way to serialize the remarks in two modes:
1) Separate mode: the metadata is separate from the remark entries.
2) Standalone mode: the metadata and the remark entries are in the same
file.
The format contains:
* a meta block: container version, container type, string table,
external file path, remark version
* a remark block: type, remark name, pass name, function name, debug
file, debug line, debug column, hotness, arguments (key, value, debug
file, debug line, debug column)
A string table is required for this format, which will be dumped in the
meta block to be consumed before parsing the remark blocks.
On clang itself, we noticed a size reduction of 13.4x compared to YAML,
and a compile-time reduction of between 1.7% and 3.5% on CTMark.
Differential Revision: https://reviews.llvm.org/D63466
Original llvm-svn: 367364
Revert llvm-svn: 367370
llvm-svn: 367372
Add a new serializer, using a binary format based on the LLVM bitstream
format.
This format provides a way to serialize the remarks in two modes:
1) Separate mode: the metadata is separate from the remark entries.
2) Standalone mode: the metadata and the remark entries are in the same
file.
The format contains:
* a meta block: container version, container type, string table,
external file path, remark version
* a remark block: type, remark name, pass name, function name, debug
file, debug line, debug column, hotness, arguments (key, value, debug
file, debug line, debug column)
A string table is required for this format, which will be dumped in the
meta block to be consumed before parsing the remark blocks.
On clang itself, we noticed a size reduction of 13.4x compared to YAML,
and a compile-time reduction of between 1.7% and 3.5% on CTMark.
Differential Revision: https://reviews.llvm.org/D63466
llvm-svn: 367364
The default mode is separate, where the metadata is serialized
separately from the remarks.
Another mode is the standalone mode, where the metadata is serialized
before the remarks, on the same stream.
llvm-svn: 367328
Put the list of fixed metadata kinds in one place.
Testing: check-llvm with+without LLVM_ENABLE_MODULES=On
Differential Revision: https://reviews.llvm.org/D64437
llvm-svn: 367257
For aliases, any expression that lowers at the MC level to global_object or
global_object+constant is valid at the object file level. getBaseObject()
should return a result if the aliasee ends up being of that form even if
the IR used to produce it is somewhat unconventional.
Note that this is different from what stripInBoundsOffsets() and that family
of functions is doing. Those functions are concerned about semantic properties
of IR, whereas here we only care about the lowering result.
Therefore reimplement getBaseObject() in a way that matches the lowering
result. This fixes a crash when producing a summary for aliases such as
that in the included test case.
Differential Revision: https://reviews.llvm.org/D65115
llvm-svn: 366952
This exposes better support to use a string table with a format through
an actual new remark::Format, called yaml-strtab.
This can now be used with -fsave-optimization-record=yaml-strtab.
llvm-svn: 366849
Summary:
Allow IntToPtrInst to carry !dereferenceable metadata tag.
This is valid since !dereferenceable can be only be applied to
pointer type values.
Change-Id: If8a6e3c616f073d51eaff52ab74535c29ed497b4
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64954
llvm-svn: 366826
This causes sections with relative pointers to be marked as read only,
which means that they won't end up sharing pages with writable data.
Differential Revision: https://reviews.llvm.org/D64948
llvm-svn: 366494
Before, everything was based on some kind of type erased parser
implementation which container a lot of boilerplate code when multiple
formats were to be supported.
This simplifies it by:
* the remark now owns its arguments
* *always* returning an error from the implementation side
* working around the way the YAML parser reports errors: catch them through
callbacks and re-insert them in a proper llvm::Error
* add a CParser wrapper that is used when implementing the C API to
avoid cluttering the C++ API with useless state
* LLVMRemarkParserGetNext now returns an object that needs to be
released to avoid leaking resources
* add a new API to dispose of a remark entry: LLVMRemarkEntryDispose
llvm-svn: 366217
Add "memtag" sanitizer that detects and mitigates stack memory issues
using armv8.5 Memory Tagging Extension.
It is similar in principle to HWASan, which is a software implementation
of the same idea, but there are enough differencies to warrant a new
sanitizer type IMHO. It is also expected to have very different
performance properties.
The new sanitizer does not have a runtime library (it may grow one
later, along with a "debugging" mode). Similar to SafeStack and
StackProtector, the instrumentation pass (in a follow up change) will be
inserted in all cases, but will only affect functions marked with the
new sanitize_memtag attribute.
Reviewers: pcc, hctim, vitalybuka, ostannard
Subscribers: srhines, mehdi_amini, javed.absar, kristof.beyls, hiraditya, cryptoad, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64169
llvm-svn: 366123
Summary: We are going to add a function attribute number 64.
Reviewers: pcc, jdoerfert, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64663
llvm-svn: 365980
Introduce and deduce "nosync" function attribute to indicate that a function
does not synchronize with another thread in a way that other thread might free memory.
Reviewers: jdoerfert, jfb, nhaehnle, arsenm
Subscribers: wdng, hfinkel, nhaenhle, mehdi_amini, steven_wu,
dexonsmith, arsenm, uenoku, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D62766
llvm-svn: 365830
This patch replaces the three almost identical "strip & accumulate"
implementations for constant pointer offsets with a single one,
combining the respective functionalities. The old interfaces are kept
for now.
Differential Revision: https://reviews.llvm.org/D64468
llvm-svn: 365723
Implements a transform pass which instruments IR such that poison semantics are made explicit. That is, it provides a (possibly partial) executable semantics for every instruction w.r.t. poison as specified in the LLVM LangRef. There are obvious parallels to the sanitizer tools, but this pass is focused purely on the semantics of LLVM IR, not any particular source language.
The target audience for this tool is developers working on or targetting LLVM from a frontend. The idea is to be able to take arbitrary IR (with the assumption of known inputs), and evaluate it concretely after having made poison semantics explicit to detect cases where either a) the original code executes UB, or b) a transform pass introduces UB which didn't exist in the original program.
At the moment, this is mostly the framework and still needs to be fleshed out. By reusing existing code we have decent coverage, but there's a lot of cases not yet handled. What's here is good enough to handle interesting cases though; for instance, one of the recent LFTR bugs involved UB being triggered by integer induction variables with nsw/nuw flags would be reported by the current code.
(See comment in PoisonChecking.cpp for full explanation and context)
Differential Revision: https://reviews.llvm.org/D64215
llvm-svn: 365536
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
This patch removes the test part that relates to the non-strict
behavior of SwitchInstProfUpdateWrapper and changes
the assertion to llvm_unreachable() to allow the check in
release builds.
This patch prepares SwitchInstProfUpdateWrapper to become
strict with one line change. That is need to revert it easily
if any failure will arise.
llvm-svn: 365439
For background of BPF CO-RE project, please refer to
http://vger.kernel.org/bpfconf2019.html
In summary, BPF CO-RE intends to compile bpf programs
adjustable on struct/union layout change so the same
program can run on multiple kernels with adjustment
before loading based on native kernel structures.
In order to do this, we need keep track of GEP(getelementptr)
instruction base and result debuginfo types, so we
can adjust on the host based on kernel BTF info.
Capturing such information as an IR optimization is hard
as various optimization may have tweaked GEP and also
union is replaced by structure it is impossible to track
fieldindex for union member accesses.
Three intrinsic functions, preserve_{array,union,struct}_access_index,
are introducted.
addr = preserve_array_access_index(base, index, dimension)
addr = preserve_union_access_index(base, di_index)
addr = preserve_struct_access_index(base, gep_index, di_index)
here,
base: the base pointer for the array/union/struct access.
index: the last access index for array, the same for IR/DebugInfo layout.
dimension: the array dimension.
gep_index: the access index based on IR layout.
di_index: the access index based on user/debuginfo types.
For example, for the following example,
$ cat test.c
struct sk_buff {
int i;
int b1:1;
int b2:2;
union {
struct {
int o1;
int o2;
} o;
struct {
char flags;
char dev_id;
} dev;
int netid;
} u[10];
};
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr)
= (void *) 4;
#define _(x) (__builtin_preserve_access_index(x))
int bpf_prog(struct sk_buff *ctx) {
char dev_id;
bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id));
return dev_id;
}
$ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \
test.c >& log
The generated IR looks like below:
...
define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 {
%2 = alloca %struct.sk_buff*, align 8
%3 = alloca i8, align 1
store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45
call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49
call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50
call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51
%4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45
%5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45
%6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs(
%struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19
%7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons(
[10 x %union.anon]* %6, i32 1, i32 5), !dbg !53
%8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons(
%union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26
%9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53
%10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s(
%struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34
%11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52
%12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55
%13 = sext i8 %12 to i32, !dbg !54
call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56
ret i32 %13, !dbg !57
}
!19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20)
!26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27)
!34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35)
Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index
attached to instructions to provide struct/union debuginfo type information.
For &ctx->u[5].dev.dev_id,
. The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout.
. The "%7 = ..." represents array subscript "5".
. The "%8 = ..." represents union member "dev" with index 1 for DI layout.
. The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout.
Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and
examining all preserve_*_access_index calls, the debuginfo struct/union/array access index
can be achieved.
The intrinsics also contain enough information to regenerate codes for IR layout.
For array and structure intrinsics, the proper GEP can be constructed.
For union intrinsics, replacing all uses of "addr" with "base" should be enough.
The test case ThinLTO/X86/lazyload_metadata.ll is adjusted to reflect the
new addition of the metadata.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61810
llvm-svn: 365423
Summary:
This makes it so that IR files using triples without an environment work
out of the box, without normalizing them.
Typically, the MSVC behavior is more desirable. For example, it tends to
enable things like constant merging, use of associative comdats, etc.
Addresses PR42491
Reviewers: compnerd
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64109
llvm-svn: 365387
For background of BPF CO-RE project, please refer to
http://vger.kernel.org/bpfconf2019.html
In summary, BPF CO-RE intends to compile bpf programs
adjustable on struct/union layout change so the same
program can run on multiple kernels with adjustment
before loading based on native kernel structures.
In order to do this, we need keep track of GEP(getelementptr)
instruction base and result debuginfo types, so we
can adjust on the host based on kernel BTF info.
Capturing such information as an IR optimization is hard
as various optimization may have tweaked GEP and also
union is replaced by structure it is impossible to track
fieldindex for union member accesses.
Three intrinsic functions, preserve_{array,union,struct}_access_index,
are introducted.
addr = preserve_array_access_index(base, index, dimension)
addr = preserve_union_access_index(base, di_index)
addr = preserve_struct_access_index(base, gep_index, di_index)
here,
base: the base pointer for the array/union/struct access.
index: the last access index for array, the same for IR/DebugInfo layout.
dimension: the array dimension.
gep_index: the access index based on IR layout.
di_index: the access index based on user/debuginfo types.
For example, for the following example,
$ cat test.c
struct sk_buff {
int i;
int b1:1;
int b2:2;
union {
struct {
int o1;
int o2;
} o;
struct {
char flags;
char dev_id;
} dev;
int netid;
} u[10];
};
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr)
= (void *) 4;
#define _(x) (__builtin_preserve_access_index(x))
int bpf_prog(struct sk_buff *ctx) {
char dev_id;
bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id));
return dev_id;
}
$ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \
test.c >& log
The generated IR looks like below:
...
define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 {
%2 = alloca %struct.sk_buff*, align 8
%3 = alloca i8, align 1
store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45
call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49
call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50
call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51
%4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45
%5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45
%6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs(
%struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19
%7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons(
[10 x %union.anon]* %6, i32 1, i32 5), !dbg !53
%8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons(
%union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26
%9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53
%10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s(
%struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34
%11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52
%12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55
%13 = sext i8 %12 to i32, !dbg !54
call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56
ret i32 %13, !dbg !57
}
!19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20)
!26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27)
!34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35)
Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index
attached to instructions to provide struct/union debuginfo type information.
For &ctx->u[5].dev.dev_id,
. The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout.
. The "%7 = ..." represents array subscript "5".
. The "%8 = ..." represents union member "dev" with index 1 for DI layout.
. The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout.
Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and
examining all preserve_*_access_index calls, the debuginfo struct/union/array access index
can be achieved.
The intrinsics also contain enough information to regenerate codes for IR layout.
For array and structure intrinsics, the proper GEP can be constructed.
For union intrinsics, replacing all uses of "addr" with "base" should be enough.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61810
llvm-svn: 365352
The IRBuilder has calls to create floating point instructions like fadd.
It does not have calls to create constrained versions of them. This patch
adds support for constrained creation of fadd, fsub, fmul, fdiv, and frem.
Reviewed by: John McCall, Sanjay Patel
Approved by: John McCall
Differential Revision: https://reviews.llvm.org/D53157
llvm-svn: 365339
This patch adds a function attribute, nofree, to indicate that a function does
not, directly or indirectly, call a memory-deallocation function (e.g., free,
C++'s operator delete).
Reviewers: jdoerfert
Differential Revision: https://reviews.llvm.org/D49165
llvm-svn: 365336
Reintroduces the scalable vector IR type from D32530, after it was reverted
a couple of times due to increasing chromium LTO build times. This latest
incarnation removes the walk over aggregate types from the verifier entirely,
in favor of rejecting scalable vectors in the isValidElementType methods in
ArrayType and StructType. This removes the 70% degradation observed with
the second repro tarball from PR42210.
Reviewers: thakis, hans, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D64079
llvm-svn: 365203
It's possible that some function can load and store the same
variable using the same constant expression:
store %Derived* @foo, %Derived** bitcast (%Base** @bar to %Derived**)
%42 = load %Derived*, %Derived** bitcast (%Base** @bar to %Derived**)
The bitcast expression was mistakenly cached while processing loads,
and never examined later when processing store. This caused @bar to
be mistakenly treated as read-only variable. See load-store-caching.ll.
llvm-svn: 365188
This reverts r365040 (git commit 5cacb91475)
Speculatively reverting, since this appears to have broken check-lld on
Linux. Partial analysis in https://crbug.com/981168.
llvm-svn: 365097
Summary:
If LTOUnit splitting is disabled, the module summary analysis computes
the summary information necessary to perform single implementation
devirtualization during the thin link with the index and no IR. The
information collected from the regular LTO IR in the current hybrid WPD
algorithm is summarized, including:
1) For vtable definitions, record the function pointers and their offset
within the vtable initializer (subsumes the information collected from
IR by tryFindVirtualCallTargets).
2) A record for each type metadata summarizing the vtable definitions
decorated with that metadata (subsumes the TypeIdentiferMap collected
from IR).
Also added are the necessary bitcode records, and the corresponding
assembly support.
The follow-on index-based WPD patch is D55153.
Depends on D53890.
Reviewers: pcc
Subscribers: mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54815
llvm-svn: 364960
This patch addresses PR41675, where a stack-pointer variable is dereferenced
too many times by its location expression, presenting a value on the stack as
the pointer to the stack.
The difference between a stack *pointer* DBG_VALUE and one that refers to a
value on the stack, is currently the indirect flag. However the DWARF backend
will also try to guess whether something is a memory location or not, based
on whether there is any computation in the location expression. By simply
prepending the stack offset to existing expressions, we can accidentally
convert a register location into a memory location, which introduces a
suprise (and unintended) dereference.
The solution is to add DW_OP_stack_value whenever we add a DIExpression
computation to a stack *pointer*. It's an implicit location computed on the
expression stack, thus needs to be flagged as a stack_value.
For the edge case where the offset is zero and the location could be a register
location, DIExpression::prepend will still generate opcodes, and thus
DW_OP_stack_value must still be added.
Differential Revision: https://reviews.llvm.org/D63429
llvm-svn: 364736
This patch introduces a new function attribute, willreturn, to indicate
that a call of this function will either exhibit undefined behavior or
comes back and continues execution at a point in the existing call stack
that includes the current invocation.
This attribute guarantees that the function does not have any endless
loops, endless recursion, or terminating functions like abort or exit.
Patch by Hideto Ueno (@uenoku)
Reviewers: jdoerfert
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62801
llvm-svn: 364555
We saw a 70% ThinLTO link time increase in Chromium for Android, see
crbug.com/978817. Sounds like more of PR42210.
> Recommit of D32530 with a few small changes:
> - Stopped recursively walking through aggregates in
> the verifier, so that we don't impose too much
> overhead on large modules under LTO (see PR42210).
> - Changed tests to match; the errors are slightly
> different since they only report the array or
> struct that actually contains a scalable vector,
> rather than all aggregates which contain one in
> a nested member.
> - Corrected an older comment
>
> Reviewers: thakis, rengolin, sdesmalen
>
> Reviewed By: sdesmalen
>
> Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 364543
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
A unique DISubprogram may be attached to a function declaration used for
call site debug info.
([6/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60713
llvm-svn: 364500
This verifier check is failing for us while doing ThinLTO on Chrome for
x86, see https://crbug.com/978218, and this helps to debug the problem.
llvm-svn: 364357
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
[Re-applies r363725 without changes after fixing a broken testcase.]
llvm-svn: 363731
This patch teaches the Verifier how to detect broken !llvm.loop
attachments as discussed in https://reviews.llvm.org/D60831. This
allows LLVM to warn and strip out the broken debug info before
attempting an LTO compilation with input generated by LLVM predating
https://reviews.llvm.org/rL361149.
rdar://problem/51631158
Differential Revision: https://reviews.llvm.org/D63499
llvm-svn: 363725
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
Extend the mechanism to overload intrinsic arguments by using either
backward or forward references to the overloadable arguments.
In for example:
def int_something : Intrinsic<[LLVMPointerToElt<0>],
[llvm_anyvector_ty], []>;
LLVMPointerToElt<0> is a forward reference to the overloadable operand
of type 'llvm_anyvector_ty' and would allow intrinsics such as:
declare i32* @llvm.something.v4i32(<4 x i32>);
declare i64* @llvm.something.v2i64(<2 x i64>);
where the result pointer type is deduced from the element type of the
first argument.
If the returned pointer is not a pointer to the element type, LLVM will
give an error:
Intrinsic has incorrect return type!
i64* (<4 x i32>)* @llvm.something.v4i32
Reviewers: RKSimon, arsenm, rnk, greened
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62995
llvm-svn: 363233
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
Most parts of LLVM don't care whether the byval type is derived from an
explicit Attribute or from the parameter's pointee type, so it makes
sense for the main access function to just return the right value.
The very few users who do care (only BitcodeReader so far) can find out
how it's specified by accessing the Attribute directly.
llvm-svn: 362642
This patch allows current users of Value::stripPointerCasts() to force
the result of the function to have the same representation as the value
it was called on. This is useful in various cases, e.g., (non-)null
checks.
In this patch only a single call site was adjusted to fix an existing
misuse that would cause nonnull where they may be wrong. Uses in
attribute deduction and other areas, e.g., D60047, are to be expected.
For a discussion on this topic, please see [0].
[0] http://lists.llvm.org/pipermail/llvm-dev/2018-December/128423.html
Reviewers: hfinkel, arsenm, reames
Subscribers: wdng, hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61607
llvm-svn: 362545
While prof branch_weights inconsistencies are being fixed patch
by patch (pass by pass) we need SwitchInstProfUpdateWrapper to
be safe with respect to inconsistent metadata that can come from
passes that have not been fixed yet. See the bug found by @nikic
in https://reviews.llvm.org/D62126.
This patch introduces one more state (called Invalid) to the
wrapper class that allows users to work with the underlying
SwitchInst ignoring the prof metadata changes.
Created a unit test for the SwitchInstProfUpdateWrapper class.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D62656
llvm-svn: 362473
The implementation is conceptually simple: We separate the LHS and
RHS into positive and negative components and then also compute the
positive and negative components of the result, taking into account
that e.g. only pos/pos and neg/neg will give a positive result.
However, there's one significant complication: SignedMin / -1 is UB
for sdiv, and we can't just ignore it, because the APInt result of
SignedMin would break the sign segregation. Instead we drop SignedMin
or -1 from the corresponding ranges, taking into account some edge
cases with wrapped ranges.
Because of the sign segregation, the implementation ends up being
nearly fully precise even for wrapped ranges (the remaining
imprecision is due to ranges that are both signed and unsigned
wrapping and are divided by a trivial divisor like 1). This means
that the testing cannot just check the signed envelope as we
usually do. Instead we collect all possible results in a bitvector
and construct a better sign wrapped range (than the full envelope).
Differential Revision: https://reviews.llvm.org/D61238
llvm-svn: 362430
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
llvm-svn: 362160
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362012
* Adds a 'scalable' flag to VectorType
* Adds an 'ElementCount' class to VectorType to pass (possibly scalable) vector lengths, with overloaded operators.
* Modifies existing helper functions to use ElementCount
* Adds support for serializing/deserializing to/from both textual and bitcode IR formats
* Extends the verifier to reject global variables of scalable types
* Updates documentation
See the latest version of the RFC here: http://lists.llvm.org/pipermail/llvm-dev/2018-July/124396.html
Reviewers: rengolin, lattner, echristo, chandlerc, hfinkel, rkruppe, samparker, SjoerdMeijer, greened, sebpop
Reviewed By: hfinkel, sebpop
Differential Revision: https://reviews.llvm.org/D32530
llvm-svn: 361953
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
In order to fold an always overflowing signed saturating add/sub,
we need to know in which direction the always overflow occurs.
This patch splits up AlwaysOverflows into AlwaysOverflowsLow and
AlwaysOverflowsHigh to pass through this information (but it is
not used yet).
Differential Revision: https://reviews.llvm.org/D62463
llvm-svn: 361858
Based on the suggestion in D62447, this adds a SaturatingInst class
that represents the saturating add/sub family of intrinsics. It
exposes the same interface as WithOverflowInst, for this reason I
have also added a common base class BinaryOpIntrinsic that holds the
actual implementation code and will be useful in some places handling
both overflowing and saturating math.
Differential Revision: https://reviews.llvm.org/D62466
llvm-svn: 361857
The guaranteed no-wrap region is never empty, it always contains at
least zero, so these optimizations don't ever apply.
To make this more obviously true, replace the conversative return
in makeGNWR with an assertion.
llvm-svn: 361698
This patch introduces a wrapper class that re-implements
several mutator methods of SwitchInst to handle changes
of prof branch_weights metadata along with remove/add
switch case methods.
Subsequent patches will use this wrapper to implement
prof branch_weights metadata handling for SwitchInst.
Reviewers: davidx, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D62122
llvm-svn: 361596
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them. The
result is saturated and clamped between the largest and smallest representable
values of the first 2 operands.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55720
llvm-svn: 361289
We shouldn't really make assumptions about possible sizes for long and long long. And longer term we should probably support vectorizing these intrinsics. By making the result types not fixed we can support vectors as well.
Differential Revision: https://reviews.llvm.org/D62026
llvm-svn: 361169
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
The scalar start/accumulator value of the fadd- and fmul reduction
should match the result type of the reduction, as well as the vector
element-type of the input vector. Although this was not explicitly
specified in the LangRef, it was taken for granted in code implementing
the reductions. The patch also fixes the LangRef by adding this
constraint.
Reviewed By: aemerson, nikic
Differential Revision: https://reviews.llvm.org/D60260
llvm-svn: 361133
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
Summary:
We hit undefined references building with ThinLTO when one source file
contained explicit instantiations of a template method (weak_odr) but
there were also implicit instantiations in another file (linkonce_odr),
and the latter was the prevailing copy. In this case the symbol was
marked hidden when the prevailing linkonce_odr copy was promoted to
weak_odr. It led to unsats when the resulting shared library was linked
with other code that contained a reference (expecting to be resolved due
to the explicit instantiation).
Add a CanAutoHide flag to the GV summary to allow the thin link to
identify when all copies are eligible for auto-hiding (because they were
all originally linkonce_odr global unnamed addr), and only do the
auto-hide in that case.
Most of the changes here are due to plumbing the new flag through the
bitcode and llvm assembly, and resulting test changes. I augmented the
existing auto-hide test to check for this situation.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, dexonsmith, arphaman, dang, llvm-commits, steven_wu, wmi
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59709
llvm-svn: 360466
Compute results in more direct ways, avoid subset intersect
operations. Extract the core code for computing mul nowrap ranges
into separate static functions, so they can be reused.
llvm-svn: 360189
DWARF5, 2.12 20ff says that
Any debugging information entry representing a pointer or reference
type [may have a DW_AT_address_class attribute].
The existing code (https://reviews.llvm.org/D29670) seems to take a
quite literal interpretation of that wording. I don't see a reason why
an rvalue reference isn't a reference type in the spirit of that
paragraph. This patch allows rvalue references to also have address
spaces.
rdar://problem/50511483
Differential Revision: https://reviews.llvm.org/D61625
llvm-svn: 360176
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
llvm-svn: 360108
Add support for srem() to ConstantRange so we can use it in LVI. For
srem the sign of the result matches the sign of the LHS. For the RHS
only the absolute value is important. Apart from that the logic is
like urem.
Just like for urem this is only an approximate implementation. The tests
check a few specific cases and run an exhaustive test for conservative
correctness (but not exactness).
Differential Revision: https://reviews.llvm.org/D61207
llvm-svn: 360055
Thus it does not assume that the old basic block is the basic block
for which we are looking at successors.
Not reviewed, but seems rather trivial, in line with the rest of
previous few patches.
llvm-svn: 359997
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
Summary:
There is `Instruction::getNumSuccessors()`, `Instruction::getSuccessor()`
and `Instruction::setSuccessor()`, but no function to replace every
specified `BasicBlock*` successor with some other specified `BasicBlock*`.
I've found one place where it should clearly be used.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61010
llvm-svn: 359994
Summary:
Remove duplicate checks that both operands have the same type. This is checked
before the switch.
Use 'integer' or 'floating-point' instead of 'arithmetic' type. I think this
might be a leftover to the days when floating point and integer operations
shared the same opcodes.
Reviewers: spatel, RKSimon, dblaikie
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61558
llvm-svn: 359985
Craig Topper