The function __multi3() is undefined on 32-bit ARM, so a call to it
should never be emitted. Instead, plain instructions need to be
generated to perform 128-bit multiplications.
Differential Revision: https://reviews.llvm.org/D103906
This is a fix for PR50481
Immediate values for AddrModeT2_i8s4 are already scaled in MCinst operand.
This patch changes the number of bits and scale factor to reflect that
state when checking stack offset status. AddrModeT2_i7s[2|4] also have
this particularity but since MVE instructions are not outlined, just move
these cases to the unhandled ones.
Differential Revision: https://reviews.llvm.org/D103167
If we cannot otherwise use a VMOVimm/VMOVFPimm/VMVNimm, fall back to
producing a VDUP(const) as opposed to a constant pool load. This will at
least be smaller codesize and can allow the VDUP to be folded into other
instructions.
Differential Revision: https://reviews.llvm.org/D103808
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
addr-label.ll crashes on ARM due to this change. This is because a
ARMConstantPoolConstant containing a BasicBlock to represent a
blockaddress may hold an invalid pointer to a BasicBlock if the
blockaddress is invalidated by its BasicBlock getting removed. In that
case all referencing blockaddresses are RAUW a constant int. Making
ARMConstantPoolConstant::CVal a WeakVH fixes the crash, but I'm not sure
that's the right fix. As a workaround, create a barrier right before
ISel so that IR optimizations can't happen while a
ARMConstantPoolConstant has been created.
Reviewed By: rnk, MaskRay, compnerd
Differential Revision: https://reviews.llvm.org/D99707
This ensures that the operands of any gather/scatter instructions that
we attempt to push out of the loop are invariant, preventing invalid IR
from being generated.
If the operand of the WhileLoopStart is flagged as killed, that
currently gets propogated to both the t2CMPri as the instruction is
reverted, and the newly created t2DoLoopStart. Only the second should
remain as killing the operand, the first dropping the flags.
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
Now that vmulh can be selected, this adds the MVE patterns to make it
legal and generate instructions.
Differential Revision: https://reviews.llvm.org/D88011
The findLoopPreheader function will currently not find a preheader if it
branches to multiple different loop headers. This patch adds an option
to relax that, allowing ARMLowOverheadLoops to process more loops
successfully. This helps with WhileLoopStart setup instructions that can
branch/fallthrough to the low overhead loop and to branch to a separate
loop from the same preheader (but I don't believe it is possible for
both loops to be low overhead loops).
Differential Revision: https://reviews.llvm.org/D102747
This makes sure that the blocks created for lowering memcpy to loops end
up with branches, even if they fall through to the successor. Otherwise
IfCvt is getting confused with unanalyzable branches and creating
invalid block layouts.
The extra branches should be removed as the tail predicated loop is
finalized in almost all cases.
The trip count for a memcpy/memset will be n/16 rounded up to the
nearest integer. So (n+15)>>4. The old code was including a BIC too, to
clear one of the bits, which does not seem correct. This remove the
extra BIC.
Note that ideally this would never actually be generated, as in the
creation of a tail predicated loop we will DCE that setup code, letting
the WLSTP perform the trip count calculation. So this doesn't usually
come up in testing (and apparently the ARMLowOverheadLoops pass does not
do any sort of validation on the tripcount). Only if the generation of
the WLTP fails will it use the incorrect BIC instructions.
Differential Revision: https://reviews.llvm.org/D102629
The Loop start instruction handled by the ARMLowOverheadLoops are:
$lr = t2DoLoopStart $r0
$lr = t2DoLoopStartTP $r1, $r0
$lr = t2WhileLoopStartLR $r0, %bb, implicit-def dead $cpsr
All three of these will have LR as the 0 argument, the trip count as the
1 argument.
This patch updated a few places in ARMLowOverheadLoops where the 0th arg
was being used for t2WhileLoopStartLR instructions as the trip count.
One place was entirely removed as it does not seem valid any more, the
case the code is trying to protect against should not be able to occur
with our correct-by-construction low overhead loops.
Differential Revision: https://reviews.llvm.org/D102620
Linker scripts might not handle COMDAT sections. SLSHardeing adds
new section for each __llvm_slsblr_thunk_xN. This new option allows
the generation of the thunks into the normal text section to handle these
exceptional cases.
,comdat or ,noncomdat can be added to harden-sls to control the codegen.
-mharden-sls=[all|retbr|blr],nocomdat.
Reviewed By: kristof.beyls
Differential Revision: https://reviews.llvm.org/D100546
The ROR instruction can only handle immediates between 1 and 31. The
would-be encoding for ROR #0 is actually the RRX instruction.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D102455
Swift's new concurrency features are going to require guaranteed tail calls so
that they don't consume excessive amounts of stack space. This would normally
mean "tailcc", but there are also Swift-specific ABI desires that don't
naturally go along with "tailcc" so this adds another calling convention that's
the combination of "swiftcc" and "tailcc".
Support is added for AArch64 and X86 for now.
This adds a simple fold into codegenprepare that converts comparison of
branches towards comparison with zero if possible. For example:
%c = icmp ult %x, 8
br %c, bla, blb
%tc = lshr %x, 3
becomes
%tc = lshr %x, 3
%c = icmp eq %tc, 0
br %c, bla, blb
As a first order approximation, this can reduce the number of
instructions needed to perform the branch as the shift is (often) needed
anyway. At the moment this does not effect very much, as llvm tends to
prefer the opposite form. But it can protect against regressions from
commits like rG9423f78240a2.
Simple cases of Add and Sub are added along with Shift, equally as the
comparison to zero can often be folded with cpsr flags.
Differential Revision: https://reviews.llvm.org/D101778
We were previously only searching a single preheader for call
instructions when reverting WhileLoopStarts to DoLoopStarts. This
extends that to multiple blocks that can come up when, for example a
loop is expanded from a memcpy. It also expends the instructions from
just Call's to also include other LoopStarts, to catch other low
overhead loops in the preheader.
Differential Revision: https://reviews.llvm.org/D102269
These pseudos are converted post-isel into t2WhileLoopStart and
t2LoopEnd/LoopDec instructions, which themselves are defined to clobber
CPSR. Doing the same with the MEMCPY nodes will make sure they are
scheduled correctly to not end up with incorrect uses.
We currently prefer t2CMPrs over t2CMPri when the node contains a shift.
This can introduce more nodes if the shift has multiple uses though, as
value from the shift will be needed anyway, and in the case of a t2CMPri
compared with zero will more readily be removed entirely.
Differential Revision: https://reviews.llvm.org/D101688
Based on the same for AArch64: 4751cadcca
At -O0, the fast register allocator may insert spills between the ldrex and
strex instructions inserted by AtomicExpandPass when expanding atomicrmw
instructions in LL/SC loops. To avoid this, expand to cmpxchg loops and
therefore expand the cmpxchg pseudos after register allocation.
Required a tweak to ARMExpandPseudo::ExpandCMP_SWAP to use the 4-byte encoding
of UXT, since the pseudo instruction can be allocated a high register (R8-R15)
which the 2-byte encoding doesn't support. However, the 4-byte encodings
are not present for ARM v8-M Baseline. To enable this, two new pseudos are
added for Thumb which are only valid for v8mbase, tCMP_SWAP_8 and
tCMP_SWAP_16.
The previously committed attempt in D101164 had to be reverted due to runtime
failures in the test suites. Rather than spending time fixing that
implementation (adding another implementation of atomic operations and more
divergence between backends) I have chosen to follow the approach taken in
D101163.
Differential Revision: https://reviews.llvm.org/D101898
Depends on D101912
Currently the ValueHandler handles both selecting the type and
location for arguments, as well as inserting instructions needed to
handle them. Split this so that the determination of the argument
handling is independent of the function state. Currently the checks
for tail call compatibility do not follow the full assignment logic,
so it misses cases where arguments require nontrivial legalization.
This should help avoid targets ending up in a buggy state where the
argument evaluation may change in different contexts.
Analogously to https://reviews.llvm.org/D98794 this patch uses the
`alignstack` attribute to fix incorrect passing of homogeneous
aggregate (HA) arguments on AArch32. The EABI/AAPCS was recently
updated to clarify how VFP co-processor candidates are aligned:
4488e34998
Differential Revision: https://reviews.llvm.org/D100853
This patch converts llvm.memset intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
The llvm.memset is converted to a TP loop for both
constant and non-constant input sizes (of llvm.memset).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D100435
GNU as documentation states that a `.thumb_func` directive implies `.thumb`, teach the asm parser to switch mode whenever it's encountered. On the other hand the labeled form, exclusive to Apple's toolchain, doesn't switch mode at all.
Reviewed By: nickdesaulniers, peter.smith
Differential Revision: https://reviews.llvm.org/D101975
This patch converts llvm.memcpy intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
From an implementation point of view, the patch
- adds an ARM specific SDAG Node (to which the llvm.memcpy intrinsic is lowered to, during first phase of ISel)
- adds a corresponding TableGen entry to generate a pseudo instruction, with a custom inserter,
on matching the above node.
- Adds a custom inserter function that expands the pseudo instruction into MIR suitable
to be (by later passes) into a WLSTP loop.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99723
This patch converts llvm.memcpy intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
From an implementation point of view, the patch
- adds an ARM specific SDAG Node (to which the llvm.memcpy intrinsic is lowered to, during first phase of ISel)
- adds a corresponding TableGen entry to generate a pseudo instruction, with a custom inserter,
on matching the above node.
- Adds a custom inserter function that expands the pseudo instruction into MIR suitable
to be (by later passes) into a WLSTP loop.
Note: A cli option is used to control the conversion of memcpy to TP
loop and this option is currently disabled by default. It may be enabled
in the future after further downstream testing.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99723
It simplifies the logic by moving the predecessor (preHeader or it's predecessor) above the target (or loopExit),
instead of moving the target to after the predecessor.
Since the loopExit is no longer being moved, directions of any branches within/to it are unaffected.
While the predecessor is being moved, the backwards movement simplifies some considerations,
and the only consideration now required is that a forward WLS to the predecessor should not become backwards.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D100094
Unfortunately the current call lowering code is built on top of the
legacy MVT/DAG based code. However, GlobalISel was not using it the
same way. In short, the DAG passes legalized types to the assignment
function, and GlobalISel was passing the original raw type if it was
simple.
I do believe the DAG lowering is conceptually broken since it requires
picking a type up front before knowing how/where the value will be
passed. This ends up being a problem for AArch64, which wants to pass
i1/i8/i16 values as a different size if passed on the stack or in
registers.
The argument type decision is split across 3 different places which is
hard to follow. SelectionDAG builder uses
getRegisterTypeForCallingConv to pick a legal type, tablegen gives the
illusion of controlling the type, and the target may have additional
hacks in the C++ part of the call lowering. AArch64 hacks around this
by not using the standard AnalyzeFormalArguments and special casing
i1/i8/i16 by looking at the underlying type of the original IR
argument.
I believe people have generally assumed the calling convention code is
processing the original types, and I've discovered a number of dead
paths in several targets.
x86 actually relies on the opposite behavior from AArch64, and relies
on x86_32 and x86_64 sharing calling convention code where the 64-bit
cases implicitly do not work on x86_32 due to using the pre-legalized
types.
AMDGPU targets without legal i16/f16 have always used a broken ABI
that promotes to i32/f32. GlobalISel accidentally fixed this to be the
ABI we should have, but this fixes it so we're using the worse ABI
that is compatible with the DAG. Ideally we would fix the DAG to match
the old GlobalISel behavior, but I don't wish to fight that battle.
A new native GlobalISel call lowering framework should let the target
process the incoming types directly.
CCValAssigns select a "ValVT" and "LocVT" but the meanings of these
aren't entirely clear. Different targets don't use them consistently,
even within their own call lowering code. My current belief is the
intent was "ValVT" is supposed to be the legalized value type to use
in the end, and and LocVT was supposed to be the ABI passed type
(which is also legalized).
With the default CCState::Analyze functions always passing the same
type for these arguments, these only differ when the TableGen part of
the lowering decide to promote the type from one legal type to
another. AArch64's i1/i8/i16 hack ends up inverting the meanings of
these values, so I had to add an additional hack to let the target
interpret how large the argument memory is.
Since targets don't consistently interpret ValVT and LocVT, this
doesn't produce quite equivalent code to the initial DAG
lowerings. I've opted to consistently interpret LocVT as the in-memory
size for stack passed values, and ValVT as the register type to assign
from that memory. We therefore produce extending loads directly out of
the IRTranslator, whereas the DAG would emit regular loads of smaller
values. This will also produce loads/stores that are wider than the
argument value if the allocated stack slot is larger (and there will
be undef padding bytes). If we had the optimizations to reduce
load/stores based on truncated values, this wouldn't produce a
different end result.
Since ValVT/LocVT are more consistently interpreted, we now will emit
more G_BITCASTS as requested by the CCAssignFn. For example AArch64
was directly assigning types to some physical vector registers which
according to the tablegen spec should have been casted to a vector
with a different element type.
This also moves the responsibility for inserting
G_ASSERT_SEXT/G_ASSERT_ZEXT from the target ValueHandlers into the
generic code, which is closer to how SelectionDAGBuilder works.
I had to xfail an x86 test since I don't see a quick way to fix it
right now (I filed bug 50035 for this). It's broken independently of
this change, and only triggers since now we end up with more ands
which hit the improperly handled selection pattern.
I also observed that FP arguments that need promotion (e.g. f16 passed
as f32) are broken, and use regular G_TRUNC and G_ANYEXT.
TLDR; the current call lowering infrastructure is bad and nobody has
ever understood how it chooses types.
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
Similarly to D101096, this makes sure that MMO operands get propagated
through from MVE gathers/scatters to the Machine Instructions. This
allows extra scheduling freedom, not forcing the instructions to act as
scheduling barriers. We create MMO's with an unknown size, specifying
that they can load from anywhere in memory, similar to the masked_gather
or X86 intrinsics.
Differential Revision: https://reviews.llvm.org/D101219
We create MMO's for the VLDn/VSTn intrinsics in ARMTargetLowering::
getTgtMemIntrinsic, but they do not currently make it ll the way through
ISel. This changes that in the various places it needs changing, making
sure that the MMO is propagate through to the final instruction. This
can help in scheduling, not treating the VLD2/VST2 as a scheduling
barrier.
Differential Revision: https://reviews.llvm.org/D101096
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Added an extra analysis for better choosing of shuffle kind in
getShuffleCost functions for better cost estimation if mask was
provided.
Differential Revision: https://reviews.llvm.org/D100865
Added an extra analysis for better choosing of shuffle kind in
getShuffleCost functions for better cost estimation if mask was
provided.
Differential Revision: https://reviews.llvm.org/D100865
Otherwise the CMP glue may be used in multiple nodes, needing to be
emitted multiple times. Currently this either increases instruction
count or fails as it attempt to insert the same node multiple times.
The ARMConstantIsland pass will convert any t2B to tB if they are within
range after it has added or moved any constant pools. They don't need to
be deliberately converted beforehand, and it doesn't deal with needing
to convert tB to t2B very well.
This patch changes the AArch32 crypto instructions (sha2 and aes) to
require the specific sha2 or aes features. These features have
already been implemented and can be controlled through the command
line, but do not have the expected result (i.e. `+noaes` will not
disable aes instructions). The crypto feature retains its existing
meaning of both sha2 and aes.
Several small changes are included due to the knock-on effect this has:
- The AArch32 driver has been modified to ensure sha2/aes is correctly
set based on arch/cpu/fpu selection and feature ordering.
- Crypto extensions are permitted for AArch32 v8-R profile, but not
enabled by default.
- ACLE feature macros have been updated with the fine grained crypto
algorithms. These are also used by AArch64.
- Various tests updated due to the change in feature lists and macros.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D99079
This adds a pattern to recognize VIDUP from BUILD_VECTOR of incrementing
adds. This can come up from either geps or adds, and came up recently in
D100550. We are just looking for a BUILD_VECTOR where each lane is an
add of the first lane with N*i, where i is the lane and N is one of 1,
2, 4, or 8, supported by the VIDUP instruction.
Differential Revision: https://reviews.llvm.org/D101263
This expands the VMOVRRD(extract(..(build_vector(a, b, c, d)))) pattern,
to also handle insert_vectors. Providing we can find the correct insert,
this helps further simplify patterns by removing the redundant VMOVRRD.
Differential Revision: https://reviews.llvm.org/D100245
CGP can move instructions like a ptrtoint into a loop, but the
MVETailPredication when converting them will currently assume invariant
trip counts. This tries to ensure the operands are loop invariant, and
bails if not.
Differential Revision: https://reviews.llvm.org/D100550
Try to fix bug 49974.
This patch fixes two issues:
1. BL does not use predicate (BL_pred is the predicate version of BL),
so we shouldn't add predicate operands in DecodeBranchImmInstruction.
2. Inside DecodeT2AddSubSPImm, we shouldn't add predicate operands into
the MCInst because ARMDisassembler::AddThumbPredicate will do that for us.
However, we should handle CC-out operand for t2SUBspImm and t2AddspImm.
Differential Revision: https://reviews.llvm.org/D100585
This clang-formats the list of ARMISD nodes. Usually this is something I
would avoid, but these cause problems with formatting every time new
nodes are added.
The list in getTargetNodeName also makes use of MAKE_CASE macros, as
other backends do.
The generic SoftFloatVectorExtract.ll test was failing when run on arm
machines, as it tries to create a f64 under soft float. Limit the
transform to when f64 is legal.
Also add a missing override, as reported in D100244.
This adds a combine for extract(x, n); extract(x, n+1) ->
VMOVRRD(extract x, n/2). This allows two vector lanes to be moved at the
same time in a single instruction, and thanks to the other VMOVRRD folds
we have added recently can help reduce the amount of executed
instructions. Floating point types are very similar, but will include a
bitcast to an integer type.
This also adds a shouldRewriteCopySrc, to prevent copy propagation from
DPR to SPR, which can break as not all DPR regs can be extracted from
directly. Otherwise the machine verifier is unhappy.
Differential Revision: https://reviews.llvm.org/D100244
Used to model structural hazards on FP issue, where some
instructions take up 2 issue slots and others one as well
as similar structural hazards on load issue, where some
instructions take up two load lanes and others one.
Differential Revision: https://reviews.llvm.org/D98977
These constraints are machine agnostic; there's no reason to handle
these per-arch. If arches don't support these constraints, then they
will fail elsewhere during instruction selection. We don't need virtual
calls to look these up; TargetLowering::getInlineAsmMemConstraint should
only be overridden by architectures with additional unique memory
constraints.
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D100416
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
This patch prevents phi-node-elimination from generating a COPY
operation for the register defined by t2WhileLoopStartLR, as it is a
terminator that defines a value.
This happens because of the presence of phi-nodes in the loop body (the
Preheader of which is the block containing the t2WhileLoopStartLR). If
this is not done, the COPY is generated above/before the terminator
(t2WhileLoopStartLR here), and since it uses the value defined by
t2WhileLoopStartLR, MachineVerifier throws a 'use before define' error.
This essentially adds on to the change in differential D91887/D97729.
Differential Revision: https://reviews.llvm.org/D100376
Combine sub 0, csinc X, Y, CC to csinv -X, Y, CC providing that the
negation of X is cheap, currently just handling constants. This comes up
during the splat of an i1 to a predicate, where we now generate csetm,
as opposed to cset; rsb.
Differential Revision: https://reviews.llvm.org/D99940
Currently the ARM backend only accpets constant expressions as the
immediate operand in load and store instructions. This allows the
result of symbolic expressions to be used in memory instructions. For
example,
0:
.space 2048
strb r2, [r0, #(.-0b)]
would be assembled into the following instructions.
strb r2, [r0, #2048]
This only adds support to ldr, ldrb, str, and strb in arm mode to
address the build failure of Linux kernel for now, but should facilitate
adding support to similar instructions in the future if the need arises.
Link:
https://github.com/ClangBuiltLinux/linux/issues/1329
Reviewed By: peter.smith, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D98916
Add a number of intrinsics which natively lower to MVE operations to the
lane interleaving pass, allowing it to efficiently interleave the lanes
of chucks of operations containing these intrinsics.
Differential Revision: https://reviews.llvm.org/D97293
FP16 to FP32 converts can be handled in MVE lane interleaving, much like
the sext/zext lowering we do. This expands the pass with fpext and
fptrunc handling, and basic fp operations allowing more efficient
lowering of fp vectors.
Differential Revision: https://reviews.llvm.org/D97292
The patch makes two updates to the arm-block-placement pass:
- Handle arbitrarily nested loops
- Extends the search (for t2WhileLoopStartLR) to the predecessor of the
preHeader.
Differential Revision: https://reviews.llvm.org/D99649
Added cost estimation for switch instruction, updated costs of branches, fixed
phi cost.
Had to increase `-amdgpu-unroll-threshold-if` default value since conditional
branch cost (size) was corrected to higher value.
Test renamed to "control-flow.ll".
Removed redundant code in `X86TTIImpl::getCFInstrCost()` and
`PPCTTIImpl::getCFInstrCost()`.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D96805
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
This removes the restriction that only Thumb2 targets enable runtime
loop unrolling, allowing it for Thumb1 only cores as well. The existing
T2 heuristics are used (for the time being) to control when and how
unrolling is performed.
Differential Revision: https://reviews.llvm.org/D99588
Mark v6m/v8m-baseline cores as having no branch predictors. This should
not alter very much on its own, but is more correct as the cores do not
have branch predictors and can help in the future.
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
As another addition to MVE lane interleaving, this handles Splat shuffle
vectors, as the shuffle of a splat is a splat.
Differential Revision: https://reviews.llvm.org/D97291
This extends the recent MVE lane interleaving passto handle other
non-instruction leaves, for which a new shuffle is added. This helps
especially for constants and potentially for arguments.
Differential Revision: https://reviews.llvm.org/D97289
MVE does not have a single sext/zext or trunc instruction that takes the
bottom half of a vector and extends to a full width, like NEON has with
MOVL. Instead it is expected that this happens through top/bottom
instructions. So the MVE equivalent VMOVLT/B instructions take either
the even or odd elements of the input and extend them to the larger
type, producing a vector with half the number of elements each of double
the bitwidth. As there is no simple instruction for a normal extend, we
often have to expand sext/zext/trunc into a series of lane moves (or
stack loads/stores, which we do not do yet).
This pass takes vector code that starts at truncs, looks for
interconnected blobs of operations that end with sext/zext and
transforms them by adding shuffles so that the lanes are interleaved and
the MVE VMOVL/VMOVN instructions can be used. This is done pre-ISel so
that it can work across basic blocks.
This initial version of the pass just handles a limited set of
instructions, not handling constants or splats or FP, which can all come
as extensions to this base.
Differential Revision: https://reviews.llvm.org/D95804
If a WhileLoopStartLR is reverted due to calls in the preheader, we may
still be able to instead create a DoLoopStart, preserving the low
overhead loop. This adds code for that, only reverting the
WhileLoopStartR to a Br/Cmp, leaving the rest of the low overhead loop
in place.
Differential Revision: https://reviews.llvm.org/D98413
This UpperBound unrolling was already enabled so long as a series of
conditions in ARMTTIImpl::getUnrollingPreferences pass. This just always
enables it as it can help fully unroll loops that would not otherwise
pass those tests.
Differential Revision: https://reviews.llvm.org/D99174
This patch changes the interface to take a RegisterKind, to indicate
whether the register bitwidth of a scalar register, fixed-width vector
register, or scalable vector register must be returned.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98874
In function ConvertVPTBlocks(), it is assumed that every instruction
within a vector-predicated block is predicated. This is false for debug
instructions, used by LLVM.
Because of this, an assertion failure is reached when an input contains
debug instructions inside VPT blocks. In non-assert builds, an out of
bounds memory access took place.
The present patch properly covers the case of debug instructions.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99075
This adds an extra pattern for inserting an f16 into a odd vector lane
via an VINS. If the dual-insert-lane pattern does not happen to apply,
this can help with some simple cases.
Differential Revision: https://reviews.llvm.org/D95471
The scalarization overhead was set deliberately high for MVE, whilst the
codegen was new. It helps protect us against the negative ramifications
of mixing scalar and vector instructions. This decreases that,
especially for floating point where the cost of extracting/inserting
lane elements can be low. For integer the cost is still fairly high due
to the cross-register-bank copy, but is no longer n^2 in the length of
the vector.
In general, this will decrease the cost of scalarizing floats and long
integer vectors. i64 increase in cost, having a high cost before and
after this patch. For floats this allows up to start doing things like
vectorizing fdiv instructions, even if they are scalarized.
Differential Revision: https://reviews.llvm.org/D98245
This uses the shuffle mask cost from D98206 to give a better cost of MVE
VREV instructions. This helps especially in VectorCombine where the cost
of shuffles is used to reorder bitcasts, which this helps keep the phase
ordering test for fp16 reductions producing optimal code. The isVREVMask
has been moved to a header file to allow it to be used across target
transform and isel lowering.
Differential Revision: https://reviews.llvm.org/D98210
This adds an Mask ArrayRef to getShuffleCost, so that if an exact mask
can be provided a more accurate cost can be provided by the backend.
For example VREV costs could be returned by the ARM backend. This should
be an NFC until then, laying the groundwork for that to be added.
Differential Revision: https://reviews.llvm.org/D98206
Given a sextload i16, we can usually generate "ldrsh [rn. rm]". If we
don't naturally have a rn, rm addressing mode, we can either generate
"ldrh [rn, #0]; sxth" or "mov rm, #0; ldrsh [rn. rm]".
We currently generate the first, always creating a sxth. They are both
the same number of instructions, but if we generate the second then the
mov #0 will likely be CSE'd or pulled out of a loop, etc.
This adjusts the ISel patterns to do that, creating a mov instead of a
sxth.
Differential Revision: https://reviews.llvm.org/D98693
Prefer (self-documenting) return values to output parameters (which are
liable to be used).
While here, rename Noop to Nop which is more widely used and improves
consistency with hasEmitNops/setEmitNops/emitNop/etc.
byval arguments need to be assumed writable. Only implicitly stack
passed arguments which aren't addressable in the IR can be assumed
immutable.
Mips is still broken since for some reason its doing its own thing
with the ValueHandlers (and x86 doesn't actually handle byval
arguments now, although some of the code is there).
This adjusts the place that the t2DoLoopStart reg allocation hint is
inserted, adding it in the ARMTPAndVPTOptimizaionPass in a similar place
as other tail predicated loop optimizations. This removes the need for
doing so in a custom inserter, and should make the hint more accurate,
only adding it where we expect to create a DLS (not DLSTP or WLS).
Recently we improved the lowering of low overhead loops and tail
predicated loops, but concentrated first on the DLS do style loops. This
extends those improvements over to the WLS while loops, improving the
chance of lowering them successfully. To do this the lowering has to
change a little as the instructions are terminators that produce a value
- something that needs to be treated carefully.
Lowering starts at the Hardware Loop pass, inserting a new
llvm.test.start.loop.iterations that produces both an i1 to control the
loop entry and an i32 similar to the llvm.start.loop.iterations
intrinsic added for do loops. This feeds into the loop phi, properly
gluing the values together:
%wls = call { i32, i1 } @llvm.test.start.loop.iterations.i32(i32 %div)
%wls0 = extractvalue { i32, i1 } %wls, 0
%wls1 = extractvalue { i32, i1 } %wls, 1
br i1 %wls1, label %loop.ph, label %loop.exit
...
loop:
%lsr.iv = phi i32 [ %wls0, %loop.ph ], [ %iv.next, %loop ]
..
%iv.next = call i32 @llvm.loop.decrement.reg.i32(i32 %lsr.iv, i32 1)
%cmp = icmp ne i32 %iv.next, 0
br i1 %cmp, label %loop, label %loop.exit
The llvm.test.start.loop.iterations need to be lowered through ISel
lowering as a pair of WLS and WLSSETUP nodes, which each get converted
to t2WhileLoopSetup and t2WhileLoopStart Pseudos. This helps prevent
t2WhileLoopStart from being a terminator that produces a value,
something difficult to control at that stage in the pipeline. Instead
the t2WhileLoopSetup produces the value of LR (essentially acting as a
lr = subs rn, 0), t2WhileLoopStart consumes that lr value (the Bcc).
These are then converted into a single t2WhileLoopStartLR at the same
point as t2DoLoopStartTP and t2LoopEndDec. Otherwise we revert the loop
to prevent them from progressing further in the pipeline. The
t2WhileLoopStartLR is a single instruction that takes a GPR and produces
LR, similar to the WLS instruction.
%1:gprlr = t2WhileLoopStartLR %0:rgpr, %bb.3
t2B %bb.1
...
bb.2.loop:
%2:gprlr = PHI %1:gprlr, %bb.1, %3:gprlr, %bb.2
...
%3:gprlr = t2LoopEndDec %2:gprlr, %bb.2
t2B %bb.3
The t2WhileLoopStartLR can then be treated similar to the other low
overhead loop pseudos, eventually being lowered to a WLS providing the
branches are within range.
Differential Revision: https://reviews.llvm.org/D97729
Add a comment explaining how we lay out stack frames for ARM targets,
based on the existing one for AArch64. Also expand the comment to
explain reserved call frames for both architectures.
Differential revision: https://reviews.llvm.org/D98258
llvm-objdump only uses one MCInstrAnalysis object, so if ARM and Thumb
code is mixed in one object, or if an object is disassembled without
explicitly setting the triple to match the ISA used, then branch and
call targets will be printed incorrectly.
This could be fixed by creating two MCInstrAnalysis objects in
llvm-objdump, like we currently do for SubtargetInfo. However, I don't
think there's any reason we need two separate sub-classes of
MCInstrAnalysis, so instead these can be merged into one, and the ISA
determined by checking the opcode of the instruction.
Differential revision: https://reviews.llvm.org/D97766
This adds some simple known bits handling for the three CSINC/NEG/INV
instructions. From the operands known bits we can compute the common
bits of the first operand and incremented/negated/inverted second
operand. The first, especially CSINC ZR, ZR, comes up fair amount in the
tests. The others are more rare so a unit test for them is added.
Differential Revision: https://reviews.llvm.org/D97788
In some rare circumstances we can be using an undef register for a
compare. When folded into a CBZ/CBNZ the undef flags are lost, leading
to machine verifier problems. This propagates the existing flags to the
new instruction.
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
Instead of converting the 0 into a ZR reg during lowering, do that with
tablegen by matching the zero immediate. This when combined with other
optimizations is more likely to use ZR and helps keep the DAG more
easily optimizable. It should not otherwise effect code generation.
Currently ARM backend validates the range of branch targets before the
layout of fragments is finalized. This causes build failure if symbolic
expressions are used, with the exception of a single symbolic value.
For example, "b.w ." works but "b.w . + 2" currently fails to
assemble. This fixes the issue by delaying this check (in
ARMAsmParser::validateInstruction) of b.w instructions until the symbol
expressions are resolved (in ARMAsmBackend::adjustFixupValue).
Link:
https://github.com/ClangBuiltLinux/linux/issues/1286
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97568
I copied the nearly identical function from AArch64 into AMDGPU, so
fix this duplication.
Mips and X86 have their own more exotic versions which should be
removed. However replacing those is better left for a separate patch
since it requires other changes to avoid regressions.
If we insert undef using a VMOVN, we can just use the original value in
three out of the four possible combinations. Using VMOVT into a undef
vector will still require the lanes to be moved, but otherwise the
non-undef value can be used.
Make sure to set the bottom bit of the symbol even when the type
attribute of a label is set after the label.
GNU as sets the thumb state according to the thumb state of the label.
If a .type directive is placed after the label, set the symbol's thumb
state according to the thumb state of the .type directive. This matches
GNU as in most cases.
From: Stefan Agner <stefan@agner.ch>
This fixes:
https://bugs.llvm.org/show_bug.cgi?id=44860https://github.com/ClangBuiltLinux/linux/issues/866
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D74927
F1.2 Standard assembler syntax fields
describes .w and .n suffixes for wide and narrow encodings.
arch/arm/probes/kprobes/test-thumb.c tests installing kprobes for
certain instructions using inline asm. There's a few instructions we
fail to assemble due to missing .w t2InstAliases.
Adds .w suffixes for:
* bl (F5.1.25 BL, BLX (immediate) T1)
* dbg (F5.1.42 DBG T1)
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D97236
Currently the load/store optimizer will only fold in increments of the
same size as the load/store. This patch expands that to any legal
immediate for the post-inc instruction.
This is a recommit of 3b34b06fc5 with correctness fixes and extra
tests.
Differential Revision: https://reviews.llvm.org/D95885
The Linux kernel when built with CONFIG_THUMB2_KERNEL makes use of these
instructions with immediate operands and wide encodings.
These are the T4 variants of the follow sections from the Arm ARM.
F5.1.72 LDR (immediate)
F5.1.229 STR (immediate)
I wasn't able to represent these simple aliases using t2InstAlias due to
the Constraints on the non-suffixed existing instructions, which results
in some manual parsing logic needing to be added.
F1.2 Standard assembler syntax fields
describes the use of the .w (wide) vs .n (narrow) encoding suffix.
Link: https://bugs.llvm.org/show_bug.cgi?id=49118
Link: https://github.com/ClangBuiltLinux/linux/issues/1296
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D96632
Early versions of the ARMv7 reference manuals considered the sp register
as a deprecated register for ldm/stm familiy of instructions. However,
later versions such as ARM DDI 0406C.d added a note to the Appendix:
D9.3 Use of the SP as a general-purpose register
Most ARM instructions, unlike Thumb instructions, provide exactly the
same access to the SP as to R0-R12. This means that it is possible to
use the SP as a general-purpose register. Earlier issues of this manual
deprecated the use of SP in an ARM instruction, in any way that is
deprecated, not permitted, or not possible in the corresponding
Thumb instruction. However, user feedback indicates a number of cases
where these instructions are useful. Therefore, ARM no longer deprecates
these instruction uses.
Also Armv8 manuals no longer consider SP as deprecated register for ldm/
stm A32 instructions.
Furthermore, GNU as also does not print a deprecated warning when using
SP with those instructions.
Drop deprecation warning for pop/ldm/push/stm instructions.
Patch by: Stefan Agner.
Differential Revision: https://reviews.llvm.org/D82692
As a followup to D95291, getOperandsScalarizationOverhead was still
using a VF as a vector factor if the arguments were scalar, and would
assert on certain matrix intrinsics with differently sized vector
arguments. This patch removes the VF arg, instead passing the Types
through directly. This should allow it to more accurately compute the
cost without having to guess at which operands will be vectorized,
something difficult with more complex intrinsics.
This adjusts one SVE test as it is now calling the wrong intrinsic vs
veccall. Without invalid InstructCosts the cost of the scalarized
intrinsic is too low. This should get fixed when the cost of
scalarization is accounted for with scalable types.
Differential Revision: https://reviews.llvm.org/D96287
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf working. ARM removed the fix in
dfac521da1, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
This removes the existing patterns for inserting two lanes into an
f16/i16 vector register using VINS, instead using a DAG combine to
pattern match the same code sequences. The tablegen patterns were
already on the large side (foreach LANE = [0, 2, 4, 6]) and were not
handling all the cases they could. Moving that to a DAG combine, whilst
not less code, allows us to better control and expand the selection of
VINSs. Additionally this allows us to remove the AddedComplexity on
VCVTT.
The extra trick that this has learned in the process is to move two
adjacent lanes using a single f32 vmov, allowing some extra
inefficiencies to be removed.
Differenial Revision: https://reviews.llvm.org/D96876
This patch provides two major changes:
1. Add getRelocationInfo to check if a constant will have static, dynamic, or
no relocations. (Also rename the original needsRelocation to needsDynamicRelocation.)
2. Only allow a constant with no relocations (static or dynamic) to be placed
in a mergeable section.
This will allow unused symbols that contain static relocations and happen to
fit in mergeable constant sections (.rodata.cstN) to instead be placed in
unique-named sections if -fdata-sections is used and subsequently garbage collected
by --gc-sections.
See https://lists.llvm.org/pipermail/llvm-dev/2021-February/148281.html.
Differential Revision: https://reviews.llvm.org/D95960
Currently the load/store optimizer will only fold in increments of the
same size as the load/store. This patch expands that to any legal
immediate for the post-inc instruction.
Differential Revision: https://reviews.llvm.org/D95885
It appears that pointer types were causing issues for the min/max cost
code in getIntrinsicInstrCost. This makes sure that when matching
icmp/select to a min/max, we only do that for normal int or float types.
A v8i32 compare will produce a v8i1 predicate, but during codegen the
v8i32 will be split into two v4i32, potentially requiring two v4i1
predicates to be merged into a single v8i1. Because this merging of two
v4i1's into a v8i1 is very expensive, we need to make the cost of the
compare equally high.
This patch adds the cost of that to ARMTTIImpl::getCmpSelInstrCost.
Because we don't know whether the user of the predicate can be split,
and the cost model is mostly pre-instruction, we may be pessimistic but
that should only be for larger and legal types. This also adds min/max
detection to the costmodel where it can be detected, to keep those in
line with the cost of simple min/max instructions. Otherwise for the
most part, costs that were already expensive have become more expensive.
Differential Revision: https://reviews.llvm.org/D96692
This change introduces support for zero flag ELF section groups to LLVM.
LLVM already supports COMDAT sections, which in ELF are a special type
of ELF section groups. These are generally useful to enable linker GC
where you want a group of sections to always travel together, that is to
be either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF assemblers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D95851
From what I can tell, a writeback is unpredictable with LR for both
loads and stores. This changes the operand from a gprnopc to a rGPR in
both cases (which I believe is essentially a NFC due to the tied-def
already being a rGPR.)
Differential Revision: https://reviews.llvm.org/D96723
Koutheir Attouchi