Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
This is a long-awaited follow-up suggested in D33578. Since then, we've picked up even more
opportunities for vector narrowing from changes like D53784, so there are a lot of test diffs.
Apart from 2-3 strange cases, these are all wins.
I've structured this to be no-functional-change-intended for any target except for x86
because I couldn't tell if AArch64, ARM, and AMDGPU would improve or not. All of those
targets have existing regression tests (4, 4, 10 files respectively) that would be
affected. Also, Hexagon overrides the shouldReduceLoadWidth() hook, but doesn't show
any regression test diffs. The trade-off is deciding if an extra vector load is better
than a single wide load + extract_subvector.
For x86, this is almost always better (on paper at least) because we often can fold
loads into subsequent ops and not increase the official instruction count. There's also
some unknown -- but potentially large -- benefit from using narrower vector ops if wide
ops are implemented with multiple uops and/or frequency throttling is avoided.
Differential Revision: https://reviews.llvm.org/D54073
llvm-svn: 346595
Eliminate the stack frame in functions with the noreturn nounwind
attributes, and when the noreturn-stack-elim target feature is
enabled. This reduces the code and stack space needed for noreturn
functions.
Differential Revision: https://reviews.llvm.org/D54210
llvm-svn: 346532
Both -fPIC and -G0 disable placement of globals in small data section,
but if a global has an explicit section assigmnent placing it in small
data, it should go there anyway.
llvm-svn: 346523
Change the type in a couple of lists and sets that only store physical
registers from unsigned to MCPhysRegs. The later is only 16bits and
saves us a bit of memory.
llvm-svn: 346254
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
Small-data (i.e. GP-relative) loads and stores allow 16-bit scaled
offset. For a load of a value of type T, the small-data area is
equivalent to an array "T sdata[65536]". This implies that objects
of smaller sizes need to be closer to the beginning of sdata,
while larger objects may be farther away, or otherwise the offset
may be insufficient to reach it. Similarly, an object of a larger
size should not be accessed via a load of a smaller size.
llvm-svn: 345975
I added these annotations in r345878 because I wasn't sure if the
fallthrough was intended. Krzysztof Parzyszek confirmed that they should
be breaks, so that's what this patch does.
Reviewers: kparzysz
Differential Revision: https://reviews.llvm.org/D53991
llvm-svn: 345883
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
Clang's -Wimplicit-fallthrough check fires on these switch cases. GCC
does not warn when a case body that ends in a switch falls through to a
case label of an outer switch.
It's not clear if these fall throughs are truly intended. The Hexagon
tests pass regardless of whether these case blocks fall through or
break.
For now, I have applied the intended fallthrough annotation macro with a
FIXME comment to unblock enabling the warning. I will send a follow-up
patch that converts them to breaks to the Hexagon maintainers.
llvm-svn: 345878
Previously this case fell through to unreachable, so it is clearly not
covered by any test case in LLVM. It may be dynamically unreachable, in
fact. However, if it were to run, this is what it would logically do.
The assert suggests that the intended behavior was not to allow folding
offsets from jump table indices, which makes sense.
llvm-svn: 345868
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
The class definition for Call_nr has the itinerary as a
parameter, but the value is never assigned to the Itinerary
field for the instruction. This means the compiler is unable
to schedule and packetize the instruction correctly because
these instrution will not have any resource descritions.
I don't have a specific test case, but the ps_call_nr.ll
test failed with a proposed patch.
llvm-svn: 345442
This will allow other generators of LLVM IR to use the auto-vectorizer
without having to change that flag.
Note: on its own, this patch will enable auto-vectorization on Hexagon
in all cases, regardless of the -fvectorize flag. There is a companion
clang patch that together with this one forms an NFC for clang users.
llvm-svn: 345169
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
Having a constant value operand in the compound instruction
is not always profitable. This patch improves coremark by ~4% on
Hexagon.
Differential Revision: https://reviews.llvm.org/D53152
llvm-svn: 344284
Also, avoid comparing GUIDs when ordering global addresses, because
source file location can cause different GUID to be calculated. As a
result, a pair of symbols can compare "less" in one directory, but
"greater" in another.
llvm-svn: 344271
Moving away from UnknownSize is part of the effort to migrate us to
LocationSizes (e.g. the cleanup promised in D44748).
This doesn't entirely remove all of the uses of UnknownSize; some uses
require tweaks to assume that UnknownSize isn't just some kind of int.
This patch is intended to just be a trivial replacement for all places
where LocationSize::unknown() will Just Work.
llvm-svn: 344186
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
The pattern had a couple of problems:
- It was checking for loads of bytes in the reverse order to what it
should have been looking for.
- It would replace loads of bytes with a load of a word without making
sure that the alignment was correct.
Thanks to Eli Friedman for pointing it out.
llvm-svn: 343514
This involves changing the shouldExpandAtomicCmpXchgInIR interface, but I have
updated the in-tree backends using this hook (ARM, AArch64, Hexagon) so they
will see no functional change. Previously this hook returned bool, but it now
returns AtomicExpansionKind.
This hook allows targets to select how a given cmpxchg is to be expanded.
D48131 uses this to expand part-word cmpxchg to a target-specific intrinsic.
See my associated RFC for more info on the motivation for this change
<http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html>.
Differential Revision: https://reviews.llvm.org/D48130
llvm-svn: 342550
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
Shufflevector instructions in LLVM IR that extract a subset of elements
of a longer input into a shorter vector can be done using VECTOR_SHUFFLEs.
This will avoid expanding them into constly extracts and inserts.
llvm-svn: 342091
Scalarization of a shuffle will break up the source vectors into individual
elements, and use them to assemble the resulting vector. An element type of
a legal vector type may not necessarily be a legal scalar type, so make
sure that the extracted values are extended to a legal scalar type.
llvm-svn: 342079
Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.
llvm-svn: 341822
This replaces r337723. The global list in the module can be huge with LTO,
plus the module can change between different invocations of the pass, so
there is no easy way to deterministically cache the ordering (especially
in the presence of multiple threads).
llvm-svn: 341478
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
llvm-svn: 341454
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
Vgather requires must be in a packet with a store, which contradicts
the no-packets feature. As a consequence, gather/scatter could not be
used with no-packets. Relax this, and allow gather packets as exceptions
to the no-packets requirements.
llvm-svn: 339177
This will remove suboptimal branching from the generated ll/sc loops.
The extra simplification pass affects a lot of testcases, which have
been modified to accommodate this change: either by modifying the
test to become immune to the CFG simplification, or (less preferablt)
by adding option -hexagon-initial-cfg-clenaup=0.
llvm-svn: 338774
For example v = <2 x i1> is represented as bbbbaaaa in a predicate register,
where b = v[1], a = v[0]. Extracting v[1] is equivalent to extracting bit 4
from the predicate register.
llvm-svn: 337934
If an HVX vector register is to be coalesced into a vector pair, make
sure that the vector pair will not have a function call in its live range,
unless it already had one. All HVX vector registers are volatile, so
any vector register live across a function call will have to be spilled.
If a vector needs to be spilled, and it's coalesced into a vector pair
then the whole pair will need to be spilled (even if only a part of it is
live), taking extra stack space.
llvm-svn: 337073
A TableGen instruction record usually contains a DAG pattern that will
describe the SelectionDAG operation that can be implemented by this
instruction. However, there will be cases where several different DAG
patterns can all be implemented by the same instruction. The way to
represent this today is to write additional patterns in the Pattern
(or usually Pat) class that map those extra DAG patterns to the
instruction. This usually also works fine.
However, I've noticed cases where the current setup seems to require
quite a bit of extra (and duplicated) text in the target .td files.
For example, in the SystemZ back-end, there are quite a number of
instructions that can implement an "add-with-overflow" operation.
The same instructions also need to be used to implement just plain
addition (simply ignoring the extra overflow output). The current
solution requires creating extra Pat pattern for every instruction,
duplicating the information about which particular add operands
map best to which particular instruction.
This patch enhances TableGen to support a new PatFrags class, which
can be used to encapsulate multiple alternative patterns that may
all match to the same instruction. It operates the same way as the
existing PatFrag class, except that it accepts a list of DAG patterns
to match instead of just a single one. As an example, we can now define
a PatFrags to match either an "add-with-overflow" or a regular add
operation:
def z_sadd : PatFrags<(ops node:$src1, node:$src2),
[(z_saddo node:$src1, node:$src2),
(add node:$src1, node:$src2)]>;
and then use this in the add instruction pattern:
defm AR : BinaryRRAndK<"ar", 0x1A, 0xB9F8, z_sadd, GR32, GR32>;
These SystemZ target changes are implemented here as well.
Note that PatFrag is now defined as a subclass of PatFrags, which
means that some users of internals of PatFrag need to be updated.
(E.g. instead of using PatFrag.Fragment you now need to use
!head(PatFrag.Fragments).)
The implementation is based on the following main ideas:
- InlinePatternFragments may now replace each original pattern
with several result patterns, not just one.
- parseInstructionPattern delays calling InlinePatternFragments
and InferAllTypes. Instead, it extracts a single DAG match
pattern from the main instruction pattern.
- Processing of the DAG match pattern part of the main instruction
pattern now shares most code with processing match patterns from
the Pattern class.
- Direct use of main instruction patterns in InferFromPattern and
EmitResultInstructionAsOperand is removed; everything now operates
solely on DAG match patterns.
Reviewed by: hfinkel
Differential Revision: https://reviews.llvm.org/D48545
llvm-svn: 336999
This is marginally helpful for removing redundant extensions, and the
code is easier to read, so it seems like an all-around win. In the new
test i8-phi-ext.ll, we used to emit an AssertSext i8; now we emit an
AssertZext i2, which allows the extension of the return value to be
eliminated.
Differential Revision: https://reviews.llvm.org/D49004
llvm-svn: 336868
An explicit untied use is not sufficient to maintain liveness of a
register redefined in a predicated instruction. For example
%1 = COPY %0
...
%1 = A2_paddif %2, %1, 1
could become
$r1 = COPY $r0
...
$r1 = A2_paddif $p0, $r1, 1
and later
$r1 = COPY $r0 ;; this is not really dead!
...
$r1 = A2_paddif $p0, $r0, 1
llvm-svn: 336662
Add the generic processor for Hexagon so that it can be used
with 3rd party programs that create a back-end with the
"generic" CPU. This patch also enables the JIT for Hexagon.
Differential Revision: https://reviews.llvm.org/D48571
llvm-svn: 335641
This value is the first vector instruction type in numerical order. The
previous value was incorrect, leaving TypeCVI_GATHER outside of the range
for vector instructions. This caused vector .new instructions to be
incorrectly encoded in the presence of gather.
llvm-svn: 335065
Implement default legalization of rotates: either in terms of the rotation
in the opposite direction (if legal), or in terms of shifts and ors.
Implement generating of rotate instructions for Hexagon. Hexagon only
supports rotates by an immediate value, so implement custom lowering of
ROTL/ROTR on Hexagon. If a rotate is not legal, use the default expansion.
Differential Revision: https://reviews.llvm.org/D47725
llvm-svn: 334497
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
The uint64_ts that we pass around AA to represent MemoryLocation sizes
are logically an Optional<uint64_t>. In D44748, we want to add an extra
'imprecise' bit to this Optional<uint64_t> to represent whether a given
MemoryLocation size is an upper-bound or an exact size. For more context
on why, please see D44748.
That patch is quite large, but reviewers seem to be OK with the
approach. In D45581 (my first attempt to split 'noise' out of D44748),
reames asked that I land a precursor that is solely replacing uint64_t
with LocationSize, which starts out as `using LocationSize = uint64_t;`.
He also gave me the OK to submit this rename without further review.
llvm-svn: 333314
When the shuffle mask selected a subvector of the second input vector,
and aligning of the source was performed, the shuffle mask was updated
incorrectly, resulting in an ICE further in the selection process.
llvm-svn: 333279
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
The code that generates post-increments for Hexagon considered
integer values only. This patch adds support to generate them for
floating point values, f32 and f64.
Differential Revision: https://reviews.llvm.org/D47036
llvm-svn: 332748
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
Data directives such as .word, .half, .hword are currently parsed using
HexagonAsmParser::ParseDirectiveValue which effectively duplicates logic from
AsmParser::parseDirectiveValue. This patch deletes that duplicated logic in
favour of using addAliasForDirective.
Differential Revision: https://reviews.llvm.org/D46999
llvm-svn: 332607
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Dead defs were being removed from the live set (in stepForward), but
registers clobbered by regmasks weren't (more specifically, they were
actually removed by removeRegsInMask, but then they were added back in).
llvm-svn: 331219
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
There was some unfortunate interaction between VSPLAT and BITCAST
related to the selection of constant vectors (coming from selecting
shuffles). Introduce VSPLATW that always splats a 32-bit word, and
can have arbitrary result type (to avoid BITCASTs of VSPLAT).
Clean up the previous selection of BITCAST/VSPLAT.
llvm-svn: 330471
Stack addressing needs addressing modes that provide an offset field
immediately following the frame index. An initializer from a non-stack
addressing could force the stack address to use a form that does not
provide an offset field.
llvm-svn: 330191
The function getMinimumVF(ElemWidth) will return the minimum VF for
a vector with elements of size ElemWidth bits. This value will only
apply to targets for which TTI::shouldMaximizeVectorBandwidth returns
true. The value of 0 indicates that there is no minimum VF.
Differential Revision: https://reviews.llvm.org/D45271
llvm-svn: 330062
The compiler is generating packet with the following instructions,
which causes an undefined register assert in the verifier.
$r0 = IMPLICIT_DEF
$r1 = IMPLICIT_DEF
S2_storerd_io killed $r29, 0, killed %d0
The problem is that the packetizer is not saving the IMPLICIT_DEF
instructions, which are needed when checking if it is legal to
add the store instruction. The fix is to add the IMPLICIT_DEF
instructions to the CurrentPacketMIs structure.
Patch by Brendon Cahoon.
llvm-svn: 329439
Packetizer keeps two zero-latency bound instrctions in the same packet ignoring
the stalls on the later instruction. This should not be the case if there is no
data dependence.
Patch by Sumanth Gundapaneni.
llvm-svn: 329437
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 329042
Two memory instructions with a dependency only on the address register
between the two (the first one of them being post-incrememnt) can be
packetized together after the offset on the second was updated to the
incremement value. Make sure that the new offset is valid for the
instruction.
llvm-svn: 328897
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 328854
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
These instructions have been around for a long time, but we
haven't supported intrinsics for them. The "new" versions use
the CSx register for the start of the buffer instead of the K
field in the Mx register.
We need to use pseudo instructions for these instructions until
after register allocation. The problem is that these instructions
allocate a M0/CS0 or M1/CS1 pair. But, we can't generate code for
the CSx set-up until after register allocation when the Mx
register has been fixed for the instruction.
There is a related clang patch.
Patch by Brendon Cahoon.
llvm-svn: 328724
This implements a set of TTI functions that the loop vectorizer uses.
The only purpose of this is to enable testing. Auto-vectorization is
disabled by default, enabled by -hexagon-autohvx.
llvm-svn: 328639
The patch contains severals changes needed to pipeline an example
that was transformed so that a Phi with a subreg is converted to
copies.
The pipeliner wasn't working for a couple of reasons.
- The RecMII was 3 instead of 2 due to the extra copies.
- Copy instructions contained a latency of 1.
- The node order algorithm was not choosing the best "bottom"
node, which caused an instruction to be scheduled that had a
predecessor and successor already scheduled.
- Updated the Hexagon Machine Scheduler to check if the node is
latency bound when adding the cost for a 0-latency dependence.
The RecMII was 3 because the computation looks at the number of
nodes in the recurrence. The extra copy is an extra node but
it shouldn't increase the latency. The new RecMII computation
looks at the latency of the instructions in the recurrence. We
changed the latency of the dependence of a copy to 0. The latency
computation for the copy also checks the use of the copy (similar
to a reg_sequence).
The node order algorithm was not choosing the last instruction
in the recurrence for a bottom up traversal. This was when the
last instruction is a copy. A check was added when choosing the
instruction to check for NodeNum if the maxASAP is the same. This
means that the scheduler will not end up with another node in
the recurrence that has both a predecessor and successor already
scheduled.
The cost computation in Hexagon Machine Scheduler adds cost when
an instruction can be packetized with a zero-latency instruction.
We should only do this if the schedule is latency bound.
Patch by Brendon Cahoon.
llvm-svn: 328542
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort. Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kparzysz
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44857
llvm-svn: 328430
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
The branch relaxation pass collects sizes of all instructions at the
beginning, before any changes have been made. It then performs one pass
over all branches to see which ones need to be extended. It does not
account for the case when a previously valid branch becomes out-of-range
due to relaxing other branches.
This approach fixes this problem by assuming from the beginning that
all extendable branches have been extended. This may cause unneeded
relaxation in some cases, but avoids iteration and recomputing instruction
sizes.
llvm-svn: 328360
The HexagonExpandCondsets pass is incorrectly removing the dead
flag on a definition that is really dead, and adding a kill flag
to a use that is tied to a definition. This causes an assert later
during the machine scheduler when querying the live interval
information.
Patch by Brendon Cahoon.
llvm-svn: 328357
HexagonGenMux would collapse pairs of predicated transfers if it assumed
that the predicated .new forms cannot be created. Turns out that generating
mux is preferable in almost all cases.
Introduce an option -hexagon-gen-mux-threshold that controls the minimum
distance between the instruction defining the predicate and the later of
the two transfers. If the distance is closer than the threshold, mux will
not be generated. Set the threshold to 0 by default.
llvm-svn: 328346
When converting an instruction to the wider version, copy any
subregisters if the original operand has a subregister.
Patch by Brendon Cahoon.
llvm-svn: 328333
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Add barrier edges to check for any physical register. The previous code
worked for the function return registers: r0/d0, v0/w0.
Patch by Brendon Cahoon.
llvm-svn: 328120
TopReadyCycle and BotReadyCycle were off by one cycle when an SU is either
the first instruction or the last instruction in a packet.
Patch by Ikhlas Ajbar.
llvm-svn: 328000
This patch changes the isLatencyBound heuristic to look at the
path length based upon the number of packets needed to schedule
a basic block. For small basic blocks, the heuristic uses a small
threshold for isLatencyBound. For large basic blocks, the
heuristic uses a large threshold.
The goal is to increase the priority of an instruction in a small
basic block that has a large height or depth relative to the code
size. For large functions, the height and depth are ignored
because it increases the live range of a register and causes more
spills. That is, for large functions, it is more important to
schedule instructions when available, and attempt to keep the defs
and uses closer together.
Patch by Brendon Cahoon.
llvm-svn: 327987
Avoid scheduling two loads in such a way that they would end up in the
same packet. If there is a load in a packet, try to schedule a non-load
next.
Patch by Brendon Cahoon.
llvm-svn: 327742
This adds two features: "packets", and "nvj".
Enabling "packets" allows the compiler to generate instruction packets,
while disabling it will prevent it and disable all optimizations that
generate them. This feature is enabled by default on all subtargets.
The feature "nvj" allows the compiler to generate new-value jumps and it
implies "packets". It is enabled on all subtargets.
The exception is made for packets with endloop instructions, since they
require a certain minimum number of instructions in the packets to which
they apply. Disabling "packets" will not prevent hardware loops from
being generated.
llvm-svn: 327302
r327171 "Improve Dependency analysis when doing multi-node Instruction Selection"
r328170 "[DAG] Enforce stricter NodeId invariant during Instruction selection"
Reverting patch as NodeId invariant change is causing pathological
increases in compile time on PPC
llvm-svn: 327197
Instruction Selection makes use of the topological ordering of nodes
by node id (a node's operands have smaller node id than it) when doing
cycle detection. During selection we may violate this property as a
selection of multiple nodes may induce a use dependence (and thus a
node id restriction) between two unrelated nodes. If a selected node
has an unselected successor this may allow us to miss a cycle in
detection an invalid selection.
This patch fixes this by marking all unselected successors of a
selected node have negated node id. We avoid pruning on such negative
ids but still can reconstruct the original id for pruning.
In-tree targets have been updated to replace DAG-level replacements
with ISel-level ones which enforce this property.
This preemptively fixes PR36312 before triggering commit r324359 relands
Reviewers: craig.topper, bogner, jyknight
Subscribers: arsenm, nhaehnle, javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43198
llvm-svn: 327170
This is a follow-up to r325169, this time for all types, not just HVX
vector types.
Disable this by default, since it's not always safe.
llvm-svn: 326915
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
There are transformation that change setcc into other constructs, and transform that try to reconstruct a setcc from the brcond condition. Depending on what order these transform are done, the end result differs.
Most of the time, it is preferable to get a setcc as a brcond argument (and this is why brcond try to recreate the setcc in the first place) so we ensure this is done every time by also doing it at the setcc level when the only user is a brcond.
Reviewers: spatel, hfinkel, niravd, craig.topper
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D41235
llvm-svn: 325892
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Krzysztof Parzyszek
llvm-svn: 325697
Use the FunctionType of the callee when it's available. It may not be
available for synthetic calls to functions specified by external symbols.
llvm-svn: 325269
The FunctionType of the callee is always available, even if the Function
of the callee is not. Use that to get the number of fixed parameters.
llvm-svn: 325259
Add a common -trap-unreachable option, similar to the target
specific hexagon equivalent, which has been replaced. This
turns unreachable instructions into traps, which is useful for
debugging.
Differential Revision: https://reviews.llvm.org/D42965
llvm-svn: 324880
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
Hexagon LoopIdiom pass to cease using the old IRBuilder createMemCpy/createMemMove
single-alignment APIs in favour of the new API that allows setting source and
destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324784
Vector pairs are legal types, but not every operation can work on pairs.
For those operations that are legal for single vectors, generate a concat
of their results on pair halves.
llvm-svn: 324350
It was expanded directly into instructions earlier. That was to avoid
loads from a constant pool for a vector negation: "xor x, splat(i1 -1)".
Implement ISD opcodes QTRUE and QFALSE to denote logical vectors of
all true and all false values, and handle setcc with negations through
selection patterns.
llvm-svn: 324348
The function shuffp2 was breaking up a wide shuffle into a pair of
narrower ones, except that the narrower shuffle masks were actually
uninitialized.
llvm-svn: 324243
Selecting of constant HVX vectors involves some "manual processing",
which mishandled an unrelated BITCAST operation causing a selection
error.
llvm-svn: 323887
Instructions like memd(r0+##global+1) are legal as long as the entire
address is properly aligned. Assuming that "global" is aligned at an
8-byte boundary, the expression "global+1" appears to be misaligned.
Handle such cases in HexagonConstExtenders, and make sure that any non-
extended offsets generated are still aligned accordingly.
llvm-svn: 323799
This reverts r323562, since it wasn't actually necessary. Constant-
extended offsets do not need to be aligned, as long as the effective
address is aligned.
Keep the testcase, with a modification which checks that such offsets
are not unnecessarily avoided.
llvm-svn: 323798
A correctly aligned address may happen to be separated into a variable
part and a constant part, where the constant part does not match the
alignment needed in a load/store that uses this address. Such a constant
cannot be used as an immediate offset in an indexed instruction.
When lowering a global address, make sure that if there is an offset
folded into the global, the offset is valid for all uses in load/store
instructions.
llvm-svn: 323562
The code in EmitFunctionEntryCode needs to know the maximum stack
alignment, but it runs very early in the selection process (before
lowering). The final stack alignment may change during lowering, so
the code needs to be moved to where the alignment is known.
llvm-svn: 323374
In addition to that, make sure that there are no boolean vector types that
are associated with multiple register classes. Specifically, remove v32i1
and v64i1 from integer register classes. These types will correspond to
results of vector comparisons, and as such should belong to the vector
predicate class. Having them in scalar registers as well makes legalization
ambiguous.
llvm-svn: 323229
We can probably take this a step further since the only
user of the isUsed flag is AsmParser it should probably
be doing this explicitly. For now this is a step in the
right direction though.
Differential Revision: https://reviews.llvm.org/D41971
llvm-svn: 322386
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
This is primarily to reduce stack usage, but ordering the use queue
according to the position in the code (earlier instructions visited
before later ones) reduces the number of unnecessary bottoms due to
visiting instructions out of order, e.g.
%reg1 = copy %reg0
%reg2 = copy %reg0
%reg3 = and %reg1, %reg2
Here, reg3 should be known to be same as reg0-2, but if reg3 is
evaluated after reg1 is updated, but before reg2 is updated, the two
inputs to the and will appear different, causing reg3 to become
bottom.
llvm-svn: 320866
Rather than adding more bits to express every
MMO flag you could want, just directly use the
MMO flags. Also fixes using a bunch of bool arguments to
getMemIntrinsicNode.
On AMDGPU, buffer and image intrinsics should always
have MODereferencable set, but currently there is no
way to do that directly during the initial intrinsic
lowering.
llvm-svn: 320746
Most of the targets don't need the scheduler class enum.
I have an X86 scheduler model change that causes some names in the enum to become about 18000 characters long. This is because using instregex in scheduler models causes the scheduler class to get named with every instruction that matches the regex concatenated together. MSVC has a limit of 4096 characters for an identifier name. Rather than trying to come up with way to reduce the name length, I'm just going to sidestep the problem by not including the enum in X86.
llvm-svn: 320552
Headers/Implementation files should be named after the class they
declare/define.
Also eliminated an `#include "llvm/CodeGen/LiveIntervalAnalysis.h"` in
favor of `class LiveIntarvals;`
llvm-svn: 320546
Shuffle generation uses vmux to collapse vectors resulting from two
individual shuffles into one. The indexes of the elements selected
from the first operand were indicated by 0xFF in the constant vector
used in the compare instruction, but the compare (veqb) set the bits
corresponding to the 0x00 elements, thus inverting the selection.
Reverse the order of operands to vmux to get the correct output.
llvm-svn: 320516
A wrong type was passed to insertVector, causing an out-of-bounds value
to be added an an operand to HexagonISD::INSERT. This later failed in
instruction selection.
llvm-svn: 320369
Introduces the AddrFI "addressing mode", which is necessary simply because
it's not possible to write a pattern that directly matches a frameindex.
Ensure callee-saved registers are accessed relative to the stackpointer. This
is necessary as callee-saved register spills are performed before the frame
pointer is set.
Move HexagonDAGToDAGISel::isOrEquivalentToAdd to SelectionDAGISel, so we can
make use of it in the RISC-V backend.
Differential Revision: https://reviews.llvm.org/D39848
llvm-svn: 320353
Summary:
Make enum ModRefInfo an enum class. Changes to ModRefInfo values should
be done using inline wrappers.
This should prevent future bit-wise opearations from being added, which can be more error-prone.
Reviewers: sanjoy, dberlin, hfinkel, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40933
llvm-svn: 320107
Summary:
The aim is to make ModRefInfo checks and changes more intuitive
and less error prone using inline methods that abstract the bit operations.
Ideally ModRefInfo would become an enum class, but that change will require
a wider set of changes into FunctionModRefBehavior.
Reviewers: sanjoy, george.burgess.iv, dberlin, hfinkel
Subscribers: nlopes, llvm-commits
Differential Revision: https://reviews.llvm.org/D40749
llvm-svn: 319821
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
Change LowerBUILD_VECTOR to use those functions. This commit will tempora-
rily affect constant vector generation (it will generate constant-extended
values instead of non-extended combines), but the code for the general case
should be better. The constant selection part will be fixed later.
llvm-svn: 318877
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
Previously, hasSideEffects was ? for TargetOpcode::PHI and would be inferred
as 1. D37065 sets the previously inferred properties explicitly. This patch sets
hasSideEffects=0 for PHI, as it is for G_PHI. MachineInstr::isSafeToMove has
been updated so it still returns false for PHI.
Additionally, HexagonBitSimplify relied on a PHI node having the
hasUnmodeledSideEffects property. This patch fixes that assumption.
Differential Revision: https://reviews.llvm.org/D37097
llvm-svn: 317721
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
An "or" that sets the sign-bit can be replaced with a "xor", if
the sign-bit was known to be clear before. With some changes to
instruction combining, the simple sign-bit check was failing.
Replace it with a more flexible one to catch more cases.
llvm-svn: 317592
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
In getOffsetRange, Max can be set to 0 to force the extender replacement
to be at or below the original value. This would cause the new offset to
be non-negative, which is preferred for memory instructions (to reduce
the likelihood of it getting constant-extended due to predication). The
problem happens when the range is shifted by an offset (present in the
instruction being examined) and the offset is negative. The entire range
for the allowable deviation will then be strictly negative. This creates
a problem, since 0 is assumed to be a valid deviation.
llvm-svn: 316601
In HexagonISelLowering, there is code to handle the case when
a function returns an i1 type. In this case, we need to generate
extra nodes to copy the result from R0 to a predicate register.
The code was returning the wrong value for the chain edge which
caused an assert "Wrong topological sorting" when converting the
instructions to MIs.
This patch fixes the problem by returning the chain for the final
copy.
Patch by Brendon Cahoon.
llvm-svn: 316367
Normally, if the registers holding the induction variable's bounds
are redefined inside of the loop's body, the loop cannot be converted
to a hardware loop. However, if the redefining instruction is actually
loading an immediate value into the register, this conversion is both
possible and legal (since the immediate itself will be used in the
loop setup in the preheader).
llvm-svn: 316218
This patch lets the llvm tools handle the new HVX target features that
are added by frontend (clang). The target-features are of the form
"hvx-length64b" for 64 Byte HVX mode, "hvx-length128b" for 128 Byte mode HVX.
"hvx-double" is an alias to "hvx-length128b" and is soon will be deprecated.
The hvx version target feature is upgated form "+hvx" to "+hvxv{version_number}.
Eg: "+hvxv62"
For the correct HVX code generation, the user must use the following
target features.
For 64B mode: "+hvxv62" "+hvx-length64b"
For 128B mode: "+hvxv62" "+hvx-length128b"
Clang picks a default length if none is specified. If for some reason,
no hvx-length is specified to llvm, the compilation will bail out.
There is a corresponding clang patch.
Differential Revision: https://reviews.llvm.org/D38851
llvm-svn: 316101
All loads of form V6_vL32b_{,cur,nt,tmp,nt_cur,nt_tmp}_{ai,pi,ppu} are
predicable on v62 (but not on v60). Mark them all as predicable in the
instruction definitions, and handle the v60 case in HII::isPredicable.
llvm-svn: 316098
Each constant extender requires an extra instruction, which adds to the
code size and also reduces the number of available slots in an instruction
packet. In most cases, the value of a repeated constant extender could be
loaded into a register, and the instructions using the extender could be
replaced with their counterparts that use that register instead.
This patch adds a pass that tries to reduce the number of constant
extenders, including extenders which differ only in an immediate offset
known at compile time, e.g. @global and @global+12.
llvm-svn: 315735
Reverting to investigate layering effects of MCJIT not linking
libCodeGen but using TargetMachine::getNameWithPrefix() breaking the
lldb bots.
This reverts commit r315633.
llvm-svn: 315637
Merge LLVMTargetMachine into TargetMachine.
- There is no in-tree target anymore that just implements TargetMachine
but not LLVMTargetMachine.
- It should still be possible to stub out all the various functions in
case a target does not want to use lib/CodeGen
- This simplifies the code and avoids methods ending up in the wrong
interface.
Differential Revision: https://reviews.llvm.org/D38489
llvm-svn: 315633
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
The software pipeliner and the packetizer try to break dependence
between the post-increment instruction and the dependent memory
instructions by changing the base register and the offset value.
However, in some cases, the existing logic didn't work properly
and created incorrect offset value.
Patch by Jyotsna Verma.
llvm-svn: 315468
The pipeliner is generating a serial sequence that causes poor
register allocation when a post-increment instruction appears
prior to the use of the post-increment register. This occurs when
there is a circular set of dependences involved with a sequence
of instructions in the same cycle. In this case, there is no
serialization of the parallel semantics that will not cause an
additional register to be allocated.
This patch fixes the problem by changing the instructions so that
the post-increment instruction is used by the subsequent
instruction, which enables the register allocator to make a
better decision and not require another register.
Patch by Brendon Cahoon.
llvm-svn: 315466
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
ELFObjectWriter's constructor.
Fixes the same ownership issue for ELF that r315245 did for MachO:
ELFObjectWriter takes ownership of its MCELFObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315254
The new format is changeAddrMode_xx_yy, where xx is the current mode,
and yy is the new one.
Old name: New name:
getBaseWithImmOffset changeAddrMode_abs_io
getAbsoluteForm changeAddrMode_io_abs
getBaseWithRegOffset changeAddrMode_io_rr
xformRegToImmOffset changeAddrMode_rr_io
getBaseWithLongOffset changeAddrMode_rr_ur
getRegShlForm changeAddrMode_ur_rr
llvm-svn: 315013
The old algoritm was not correct, although it worked most of the time.
Avoid the complex reachability analysis and simply calculate the maximal
registers out of the set of all referenced registers.
llvm-svn: 314991
If the two instructions being compared for equivalence have corresponding operands
that are integer constants, then check their values to determine equivalence.
Patch by Suyog Sarda!
llvm-svn: 314642
This patch produces a crash and hexagon_vector_loop_carried_reuse_constant.ll test fails on Windows (llvm-clang-x86_64-expensive-checks-win build bot).
llvm-svn: 314361
Add two callbacks to MachineEvaluator, so that specific implementations
can specify more details about register classes:
- composeWithSubRegIndex(RC,Idx), to provide the register class for a
register from RC used in conjunction with a subregister index Idx.
- getPhysRegBitWidth(Reg), to provide the size in bits of the given
physical register.
llvm-svn: 314136
If the two instructions being compared for equivalence have corresponding operands
that are integer constants, then check their values to determine equivalence.
Patch by Suyog Sarda!
llvm-svn: 313993
This patch adds a pass that removes the computation of provably redundant
expressions that have been computed earlier in a previous iteration. It
relies on the use of PHIs to identify loop carried dependences.
This is scalar replacement for vector types.
llvm-svn: 313925
This removes the duplicate HVX instruction set for the 128-byte mode.
Single instruction set now works for both modes (64- and 128-byte).
llvm-svn: 313362
It used to return the actual field value from the instruction descriptor.
There is no reason for that, that value is not interesting in any way and
the specifics of its encoding in the descriptor should not be exposed.
llvm-svn: 313257
The check (assuming positive stride) for validity of memmove should be
(a) the destination is at a lower address than the source, or
(b) the distance between the source and destination is greater than or
equal the number of bytes copied.
For the second part it is sufficient to assume that the destination
is at a higher address, since the opposite case is covered by (a).
The distance calculation was previously done by subtracting the
pointers in the wrong order.
llvm-svn: 311650
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Certain operations require vector of i1 values. However, for Hexagon
architecture compatibility, they need to be represented as vector of i8.
Patch by Suyog Sarda.
llvm-svn: 309677
Summary:
Since r293359, most dump() function are only defined when
`!defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)` holds. print() functions
only used by dump() functions are now unused in release builds,
generating lots of warnings. This patch only defines some print()
functions if they are used.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: arsenm, mzolotukhin, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D35949
llvm-svn: 309553
Summary:
This silences a couple of implicit fallthrough warnings with GCC 7.1 in
this file.
Reviewers: colinl, kparzysz
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35889
llvm-svn: 309129
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
The flag "-hexagon-emit-lut-text" (defaulted to false) is added to decide
on where to keep the switch generated lookup table.
Differential Revision: https://reviews.llvm.org/D34818
llvm-svn: 308316
The target-independent lowering works fine, except concatenating 32-bit
words. Add a pattern to generate A2_combinew instead of 64-bit asl/or.
llvm-svn: 308186
This is the LLVM part, adding definitions for
void @llvm.hexagon.Y2.dccleana(i8*)
void @llvm.hexagon.Y2.dccleaninva(i8*)
void @llvm.hexagon.Y2.dcinva(i8*)
void @llvm.hexagon.Y2.dczeroa(i8*)
void @llvm.hexagon.Y4.l2fetch(i8*, i32)
void @llvm.hexagon.Y5.l2fetch(i8*, i64)
The clang part will follow.
llvm-svn: 308032
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table generated from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306877
This patch adds a new LLVM flag -hexagon-emit-jt-text which is defaulted to
"false". The value "true" emits the switch generated jump tables in text section.
Differential Revision: https://reviews.llvm.org/D34820
llvm-svn: 306872
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306869
The changes are a result of discussion of https://reviews.llvm.org/D33685.
It solves the following problem:
1. We can inform getGEPCost about simplified indices to help it with
calculating the cost. But getGEPCost does not take into account the
context which GEPs are used in.
2. We have getUserCost which can take the context into account but we cannot
inform about simplified indices.
With the changes getUserCost will have access to additional information
as getGEPCost has.
The one parameter getUserCost is also provided.
Differential Revision: https://reviews.llvm.org/D34057
llvm-svn: 306674
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
It causes an extra pass of the machine verifier to be added to the pass
manager, and causes test/CodeGen/Generic/llc-start-stop.ll to fail.
llvm-svn: 306140
The feeder instruction will be moved to right before the compare, so
the updating code should not be looking for kills past the compare.
llvm-svn: 306059
The second part of r305300: when placing the mux at the later location,
make sure that it won't use any register that was killed between the
two original instructions. Remove any such kills and transfer them to
the mux.
llvm-svn: 305553
Store-immediate instructions have a non-extendable offset. Since the
actual offset for a stack object is not known until much later, only
generate these stores when the stack size (at the time of instruction
selection) is small.
llvm-svn: 305305
When a mux instruction is created from a pair of complementary conditional
transfers, it can be placed at the location of either the earlier or the
later of the transfers. Since it will use the operands of the original
transfers, putting it in the earlier location may hoist a kill of a source
register that was originally further down. Make sure the kill flag is
removed if the register is still used afterwards.
llvm-svn: 305300
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The initial assumption was that the simplification would converge to a
fixed point relatvely quickly. Turns out that there are legitimate situa-
tions where the complexity of the code causes it to take a large number
of iterations.
Two main changes:
- Instead of aborting upon hitting the limit, simply return nullptr.
- Reduce the limit to 10,000 from 100,000.
llvm-svn: 304441
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
For multiplications of 64-bit values (giving 64-bit result), detect
cases where the arguments are sign-extended 32-bit values, on a per-
operand basis. This will allow few patterns to match a wider variety
of combinations in which extensions can occur.
llvm-svn: 304223
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Allocframe and the following stores on the stack have a latency of 2 cycles
when not in the same packet. This happens because R29 is needed early by the
store instruction. Since one of such stores can be packetized along with
allocframe and use old value of R29, we can assign it 0 cycle latency
while leaving latency of other stores to the default value of 2 cycles.
Patch by Jyotsna Verma.
llvm-svn: 302034
The packetizer needs to convert .cur instruction to its regular form if
the use is not in the same packet as the .cur. The code in the packetizer
handles one type of .cur, which is the vector load case. This patch
updates the packetizer so that it can undo all the .cur instructions.
In the test case, the .cur is the 128B version, but there are also the
post-increment versions.
Patch by Brendon Cahoon.
llvm-svn: 302032
The compiler was generating code that ends up ignoring a multiple
latency dependence between two instructions by scheduling the
intructions in back-to-back packets.
The packetizer needs to end a packet if the latency of the current
current insruction and the source in the previous packet is
greater than 1 cycle. This case occurs when there is still room in
the current packet, but scheduling the instruction causes a stall.
Instead, the packetizer should start a new packet. Also, if the
current packet already contains a stall, then it is okay to add
another instruction to the packet that also causes a stall. This
occurs when there are no instructions that can be scheduled in
between the producer and consumer instructions.
This patch changes the latency for loads to 2 cycles from 3 cycles.
This change refects that a load only needs to be separated by
one extra packet to eliminate the stall.
Patch by Ikhlas Ajbar.
llvm-svn: 301954
Krzysztof Parzyszek