Handle position independent code for MIPS32.
When callee is global address, lower call will emit callee
as G_GLOBAL_VALUE and add target flag if needed.
Support $gp in getRegBankFromRegClass().
Select G_GLOBAL_VALUE, specially handle case when
there are target flags attached by lowerCall.
Differential Revision: https://reviews.llvm.org/D62589
llvm-svn: 362210
Move initGlobalBaseReg from MipsSEDAGToDAGISel to MipsFunctionInfo.
This way functions used for handling position independent code during
instruction selection, getGlobalBaseReg and initGlobalBaseReg,
end up in same class.
Differential Revision: https://reviews.llvm.org/D62586
llvm-svn: 362206
Lower call for callee that is register for MIPS32.
Register should contain callee function address.
Differential Revision: https://reviews.llvm.org/D62585
llvm-svn: 362204
The D45316 introduced the `shouldTransformMulToShiftsAddsSubs` function
to check that breaking down constant multiplications into a series
of shifts, adds, and subs is efficient. Unfortunately, this function
does not check maximum number of steps on all paths of the algorithm.
This patch fixes this bug.
Fix for PR41929.
Differential Revision: https://reviews.llvm.org/D62166
llvm-svn: 361606
R_ARM_NONE can be used to create references among sections. When
--gc-sections is used, the referenced section will be retained if the
origin section is retained.
Add a generic MCFixupKind FK_NONE as this kind of no-op relocation is
ubiquitous on ELF and COFF, and probably available on many other binary
formats. See D62014.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D61992
llvm-svn: 360980
LLVM previously used `DW_CFA_def_cfa` instruction in .eh_frame to set
the register and offset for current CFA rule. We change it to
`DW_CFA_def_cfa_register` which is the same one used by GAS that only
changes the register but keeping the old offset.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D61899
llvm-svn: 360765
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360727
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure.
llvm-svn: 360497
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
On Mips32r2 bitcast can be expanded to two sw instructions and an ldc1
when using bitcast i64 to double or an sdc1 and two lw instructions when
using bitcast double to i64. By introducing custom lowering that uses
mtc1/mthc1 we can avoid excessive instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D61069
llvm-svn: 359171
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
Summary:
The MachineFunction should have been created with the correct subtarget. As
long as there is no way to change it, MipsTargetMachine can just capture it
directly from the MachineFunction without calling getSubtargetImpl again.
While there, const correct the Subtarget pointer to avoid a const_cast.
I believe the Mips16Subtarget and NoMips16Subtarget members are never used, but
I'll leave there removal for a separate patch.
Reviewers: echristo, atanasyan
Reviewed By: atanasyan
Subscribers: sdardis, arichardson, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60936
llvm-svn: 359071
As discussed on PR41359, this patch renames the pair of shift-mask target feature functions to make their purposes more obvious.
shouldFoldShiftPairToMask -> shouldFoldConstantShiftPairToMask
preferShiftsToClearExtremeBits -> shouldFoldMaskToVariableShiftPair
llvm-svn: 358526
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
Summary:
The InlineAsm::AsmDialect is only required for X86; no architecture
makes use of it and as such it gets passed around between arch-specific
and general code while being unused for all architectures but X86.
Since the AsmDialect is queried from a MachineInstr, which we also pass
around, remove the additional AsmDialect parameter and query for it deep
in the X86AsmPrinter only when needed/as late as possible.
This refactor should help later planned refactors to AsmPrinter, as this
difference in the X86AsmPrinter makes it harder to make AsmPrinter more
generic.
Reviewers: craig.topper
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60488
llvm-svn: 358101
To disable using of odd floating-point registers (O32 ABI and
-mno-odd-spreg command line option) such registers and their
super-registers added to the set of reserved registers. In general, it
works. But there is at least one problem - in case of enabled machine
verifier pass some floating-point tests failed because live ranges of
register units that are reserved is not empty and verification pass
failed with "Live segment doesn't end at a valid instruction" error
message.
There is D35985 patch which tries to solve the problem by explicit
removing of register units. This solution did not get approval.
I would like to use another approach for prevent using odd floating
point registers - define `AltOrders` and `AltOrderSelect` for MIPS
floating point register classes. Such `AltOrders` contains reduced set
of registers. At first glance, such solution does not break any test
cases and allows enabling machine instruction verification for all MIPS
test cases.
Differential Revision: http://reviews.llvm.org/D59799
llvm-svn: 357472
The `lowerMSASplatImm` function zero-extends `i32` immediates while
building constant. If target type is `i64`, negative immediate loses
the sign. As a result, for example `__builtin_msa_ldi_d(-1)` lowered
to series of instruction loads incorrect value 0xffffffff to the `$w0`
register instead of single `ldi.d $w0, -1` instruction.
The fix zero-extends unsigned immediates and signed-extend signed
immediates.
Differential Revision: http://reviews.llvm.org/D59884
llvm-svn: 357264
Move selectCopy into MipsInstructionSelector class.
Select copy for arguments from FPRBRegBank for MIPS32.
Differential Revision: https://reviews.llvm.org/D59644
llvm-svn: 356886
Add floating point register bank for MIPS32.
Implement getRegBankFromRegClass for float register classes.
Differential Revision: https://reviews.llvm.org/D59643
llvm-svn: 356883
Lower float and double arguments in registers for MIPS32.
When float/double argument is passed through gpr registers
select appropriate move instruction.
Differential Revision: https://reviews.llvm.org/D59642
llvm-svn: 356882
This was creating a copy of the register the pseudo itself was
def'ing, leaving a copy of an undefined register. I'm not sure how
the verifier is not catching this, but this avoids asserting in a
future change to RegAllocFast
llvm-svn: 356716
Dynamic stack realignment was disabled on micromips by checking if
target has standard encoding. We simply change the condition to skip
Mips16 only.
Patch by Mirko Brkusanin.
Differential Revision: http://reviews.llvm.org/D59499
llvm-svn: 356478
Switch to the `MCParserUtils::parseAssignmentExpression` for parsing
assignment expressions in the `.set` directive reduces code and allows
to print an error message instead of crashing in case of incorrect
recursive using of the `.set`.
Fix for the bug https://bugs.llvm.org/show_bug.cgi?id=41053.
Differential Revision: http://reviews.llvm.org/D59452
llvm-svn: 356461
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
Certain 32 bit constants can be generated with a single instruction
instead of two. Implement materialize32BitImm function for MIPS32.
Differential Revision: https://reviews.llvm.org/D59369
llvm-svn: 356238
Before this change LLVM emits non-microMIPS variant of the `mov.d`
command for microMIPS code.
Differential Revision: http://reviews.llvm.org/D59045
llvm-svn: 356052
To provide mapping between standard and microMIPS R6 variants of the
`sw` command we have to rename SWSP_xxx commands from "sw" to "swsp".
Otherwise `tablegen` starts to show the error `Multiple matches found
for `SW'`. After that to restore printing SWSP command as `sw`, I add
an appropriate `MipsInstAlias` instance.
We also need to implement "size reduction" for microMIPS R6. But this
task is for separate patch. After that the `micromips-lwsp-swsp.ll` test
case will be extended.
Differential Revision: http://reviews.llvm.org/D59046
llvm-svn: 356045
On micromips MipsMTLOHI is always matched to PseudoMTLOHI_DSP regardless
of +dsp argument. This patch checks is HasDSP predicate is present for
PseudoMTLOHI_DSP so PseudoMTLOHI_MM can be matched when appropriate.
Add expansion of PseudoMTLOHI_MM instruction into a mtlo/mthi pair.
Patch by Mirko Brkusanin.
Differential Revision: http://reviews.llvm.org/D59203
llvm-svn: 356039
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
A pattern needed to match TruncIntFP was missing. This was causing multiple
tests from llvm test suite to fail during compilation for micromips.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D58722
llvm-svn: 355825
Narrow Scalar G_MUL for MIPS32.
Revisit NarrowScalar implementation in LegalizerHelper.
Introduce new helper function multiplyRegisters.
It performs generic multiplication of values held in multiple registers.
Generated instructions use only types NarrowTy and i1.
Destination can be same or two times size of the source.
Differential Revision: https://reviews.llvm.org/D58824
llvm-svn: 355814
Unsigned mul high for MIPS32 is selected into two PseudoInstructions:
PseudoMULTu and PseudoMFHI that use accumulator register class ACC64 for
some of its operands. Registers in this class have appropriate hi and lo
register as subregisters: $lo0 and $hi0 are subregisters of $ac0 etc.
mul instruction implicit-defs $lo0 and $hi0 according to MipsInstrInfo.td.
In functions where mul and PseudoMULTu are present fastRegisterAllocator
will "run out of registers during register allocation" because
'calcSpillCost' for $ac0 will return spillImpossible because subregisters
$lo0 and $hi0 of $ac0 are reserved by mul instruction above. A solution is
to mark implicit-defs of $lo0 and $hi0 as dead in mul instruction.
Differential Revision: https://reviews.llvm.org/D58715
llvm-svn: 355594
MIPS target supports lowering `RETURNADDR` and `FRAMEADDR` for a current
frame only. It's better to show an error message then crash on assertion
if `__builtin_return_address` is invoked with non-zero argument.
llvm-svn: 355558
Unsigned mul high for MIPS32 is selected into two PseudoInstructions:
PseudoMULTu and PseudoMFHI that use accumulator register class ACC64 for
some of its operands. Registers in this class have appropriate hi and lo
register as subregisters: $lo0 and $hi0 are subregisters of $ac0 etc.
mul instruction implicit-defs $lo0 and $hi0 according to MipsInstrInfo.td.
In functions where mul and PseudoMULTu are present fastRegisterAllocator
will "run out of registers during register allocation" because
'calcSpillCost' for $ac0 will return spillImpossible because subregisters
$lo0 and $hi0 of $ac0 are reserved by mul instruction above. A solution is
to mark implicit-defs of $lo0 and $hi0 as dead in mul instruction.
Differential Revision: https://reviews.llvm.org/D58715
llvm-svn: 355178
Fixes https://bugs.llvm.org/show_bug.cgi?id=40325 by zero extending
(and x, 1) the condition before branching on it.
To avoid regressing trivial cases, I'm combining emission of cmp+br
sequences for the single-use + same block case (similar to what we
do in x86). icmpbr1.ll still regresses due to the cross-bb usage
of the condition.
Differential Revision: https://reviews.llvm.org/D58576
llvm-svn: 354808
Filling a delay slot in 32bit jump instructions with a 16bit instruction
can cause issues. According to the documentation such an operation is
unpredictable.
This patch adds opcode Mips::PseudoIndirectBranch_MM alongside
Mips::PseudoIndirectBranch and other instructions that are expanded to jr
instruction and do not allow a 16bit instruction in their delay slots.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D58507
llvm-svn: 354672
DAG combiner combines two shifts into shift + and with bitmask.
Avoid such combines for vectors since leaving two vector shifts
as they are produces better end results.
Differential Revision: https://reviews.llvm.org/D58225
llvm-svn: 354461
Select G_BR and G_BRCOND for MIPS32.
Unconditional branch G_BR does not have register operand,
for that reason we only add tests.
Since conditional branch G_BRCOND compares register to zero on MIPS32,
explicit extension must be performed on i1 condition in order to set
high bits to appropriate value.
Differential Revision: https://reviews.llvm.org/D58182
llvm-svn: 354022
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Make behavior of G_LOAD in widenScalar same as for G_ZEXTLOAD and
G_SEXTLOAD. That is perform widenScalarDst to size given by the target
and avoid additional checks in common code. Targets can reorder or add
additional rules in LegalizeRuleSet for the opcode to achieve desired
behavior.
Select extending load that does not have specified type of extension
into zero extending load.
Select truncating store that stores number of bytes indicated by size
in MachineMemoperand.
Differential Revision: https://reviews.llvm.org/D57454
llvm-svn: 353520
This patch removes hidden codegen flag -print-schedule effectively reverting the
logic originally committed as r300311
(https://llvm.org/viewvc/llvm-project?view=revision&revision=300311).
Flag -print-schedule was originally introduced by r300311 to address PR32216
(https://bugs.llvm.org/show_bug.cgi?id=32216). That bug was about adding "Better
testing of schedule model instruction latencies/throughputs".
These days, we can use llvm-mca to test scheduling models. So there is no longer
a need for flag -print-schedule in LLVM. The main use case for PR32216 is
now addressed by llvm-mca.
Flag -print-schedule is mainly used for debugging purposes, and it is only
actually used by x86 specific tests. We already have extensive (latency and
throughput) tests under "test/tools/llvm-mca" for X86 processor models. That
means, most (if not all) existing -print-schedule tests for X86 are redundant.
When flag -print-schedule was first added to LLVM, several files had to be
modified; a few APIs gained new arguments (see for example method
MCAsmStreamer::EmitInstruction), and MCSubtargetInfo/TargetSubtargetInfo gained
a couple of getSchedInfoStr() methods.
Method getSchedInfoStr() had to originally work for both MCInst and
MachineInstr. The original implmentation of getSchedInfoStr() introduced a
subtle layering violation (reported as PR37160 and then fixed/worked-around by
r330615).
In retrospect, that new API could have been designed more optimally. We can
always query MCSchedModel to get the latency and throughput. More importantly,
the "sched-info" string should not have been generated by the subtarget.
Note, r317782 fixed an issue where "print-schedule" didn't work very well in the
presence of inline assembly. That commit is also reverted by this change.
Differential Revision: https://reviews.llvm.org/D57244
llvm-svn: 353043
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
Instruction abs.[ds] is not generating correct result when working
with NaNs for revisions prior mips32r6 and mips64r6.
To generate a sequence which always produce a correct result, but also
to allow user more control on how his code is compiled, attribute
+abs2008 is added, so user can choose legacy or 2008.
By default legacy mode is used on revisions prior R6. Mips32r6 and
mips64r6 use abs2008 mode by default.
Differential Revision: https://reviews.llvm.org/D35983
llvm-svn: 352370
Lower G_USUBO and G_USUBE. Add narrowScalar for G_SUB.
Legalize and select G_SUB for MIPS 32.
Differential Revision: https://reviews.llvm.org/D53416
llvm-svn: 352351
Select zero extending and sign extending load for MIPS32.
Use size from MachineMemOperand to determine number of bytes to load.
Differential Revision: https://reviews.llvm.org/D57099
llvm-svn: 352038
Use CombinerHelper to combine extending load instructions.
G_LOAD combined with G_ZEXT, G_SEXT or G_ANYEXT gives G_ZEXTLOAD,
G_SEXTLOAD or G_LOAD with same type as def of extending instruction
respectively.
Similarly G_ZEXTLOAD combined with G_ZEXT gives G_ZEXTLOAD and
G_SEXTLOAD combined with G_SEXT gives G_SEXTLOAD with same type
as def of extending instruction.
Differential Revision: https://reviews.llvm.org/D56914
llvm-svn: 352037
This reapplies commit r351987 with a failed test fix. Now the test
accepts both DW_OP_GNU_push_tls_address and DW_OP_form_tls_address
opcode.
Original commit message:
```
This is a fix for a regression introduced by the rL348194 commit. In
that change new type (MEK_DTPREL) of MipsMCExpr expression was added,
but in some places of the code this type of expression considered as
unexpected.
This change fixes the bug. The MEK_DTPREL type of expression is used for
marking TLS DIEExpr only and contains a regular sub-expression. Where we
need to handle the expression, we retrieve the sub-expression and
handle it in a common way.
```
llvm-svn: 352034
This is a fix for a regression introduced by the rL348194 commit. In
that change new type (MEK_DTPREL) of MipsMCExpr expression was added,
but in some places of the code this type of expression considered as
unexpected.
This change fixes the bug. The MEK_DTPREL type of expression is used for
marking TLS DIEExpr only and contains a regular sub-expression. Where we
need to handle the expression, we retrieve the sub-expression and
handle it in a common way.
llvm-svn: 351987
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
llvm-svn: 351882
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The callee address is added as an optional operand (MCSymbol) in
AdjustInstrPostInstrSelection() and then used by asm printer to insert:
'.reloc tmplabel, R_MIPS_JALR, symbol
tmplabel:'.
Controlled with '-mips-jalr-reloc', default is true.
Differential revision: https://reviews.llvm.org/D56694
llvm-svn: 351485
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
With this patch, shifts are lowered to optimal number of instructions
necessary to shift types larger than the general purpose register size.
This resolves PR/32293.
Thanks to Kyle Butt for reporting the issue!
Differential Revision: https://reviews.llvm.org/D56320
llvm-svn: 351059
Introduce GlobalISel pre legalizer pass for MIPS.
It will be used to cope with instructions that require
combining before legalization.
Differential Revision: https://reviews.llvm.org/D56269
llvm-svn: 351046
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
The following code requests 64-bit PC-relative relocations unsupported
by MIPS ABI. Now it triggers an assertion. It's better to show an error
message.
```
foo:
.quad bar - foo
```
llvm-svn: 350152
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
Add support for s64 libcalls for G_SDIV, G_UDIV, G_SREM and G_UREM
and use integer type of correct size when creating arguments for
CLI.lowerCall.
Select G_SDIV, G_UDIV, G_SREM and G_UREM for types s8, s16, s32 and s64
on MIPS32.
Differential Revision: https://reviews.llvm.org/D55651
llvm-svn: 349499
Add narrowScalar for G_AND and G_XOR.
Legalize G_AND G_OR and G_XOR for types other then s32
with clampScalar on MIPS32.
Differential Revision: https://reviews.llvm.org/D55362
llvm-svn: 349475
This patch introduces a generic function to determine whether a given vector type is known to be a splat value for the specified demanded elements, recursing up the DAG looking for BUILD_VECTOR or VECTOR_SHUFFLE splat patterns.
It also keeps track of the elements that are known to be UNDEF - it returns true if all the demanded elements are UNDEF (as this may be useful under some circumstances), so this needs to be handled by the caller.
A wrapper variant is also provided that doesn't take the DemandedElts or UndefElts arguments for cases where we just want to know if the SDValue is a splat or not (with/without UNDEFS).
I had hoped to completely remove the X86 local version of this function, but I'm seeing some regressions in shift/rotate codegen that will take a little longer to fix and I hope to get this in sooner so I can continue work on PR38243 which needs more capable splat detection.
Differential Revision: https://reviews.llvm.org/D55426
llvm-svn: 348953
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
When replacing jal with jalr, also emit '.reloc R_MIPS_JALR' (R_MICROMIPS_JALR
for micromips). The linker might then be able to turn jalr into a direct
call.
Add '-mips-jalr-reloc' to enable/disable this feature (default is true).
Differential revision: https://reviews.llvm.org/D55292
llvm-svn: 348760
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
The `DIEExpr` is used in debug information entries for either TLS variables
or call sites. For now the last case is unsupported for targets with delay
slots, for MIPS in particular.
The `DIEExpr::EmitValue` method calls a virtual `EmitDebugThreadLocal`
routine which, in case of MIPS, always emits either `.dtprelword` or
`.dtpreldword` directives. That is okay for "main" code, but in unit
tests `DIEExpr` instances can be created not for TLS variables only even
on MIPS hosts. That is a reason of the `TestDWARF32Version5Addr8AllForms`
failure because handling of the `R_MIPS_TLS_DTPREL` relocation writes
incorrect value into dwarf structures. And anyway unconditional emitting
of `.dtprelword` directives will be incorrect when/if debug information
entries for call sites become supported on MIPS.
The patch solves the problem by wrapping expression created in the
`MipsTargetObjectFile::getDebugThreadLocalSymbol` method in to the
`MipsMCExpr` expression with a new `MEK_DTPREL` tag. This tag is
recognized in the `MipsAsmPrinter::EmitDebugThreadLocal` method and
`.dtprelword` directives created in this case only. In other cases the
expression saved as a regular data.
Differential Revision: http://reviews.llvm.org/D54937
llvm-svn: 348194
This reverts r294500. DwarfCompileUnit::addAddressExpr uses DIEExpr
for PCOffset. In that case the expression is unrelated to thread locals
and so emitting a value of the DIEExpr does not have to always mean
emit-debug-thread-local.
llvm-svn: 347744
R_MIPS_JALR/R_MICROMIPS_JALR can now be parsed in .s files and emitted to .o.
They are still not generated with JALR.
Differential revision: https://reviews.llvm.org/D54721
llvm-svn: 347398
Set operands order for G_MERGE_VALUES and G_UNMERGE_VALUES so
that least significant bits always go first, regardless of endianness.
Differential Revision: https://reviews.llvm.org/D54098
llvm-svn: 346305
The `sigrie` instruction signals a Reserved Instruction Exception.
This patch adds support for assembling / disassembling the instruction.
Differential Revision: http://reviews.llvm.org/D53861
llvm-svn: 346230
Expand on LONG_BRANCH_LUi and LONG_BRANCH_(D)ADDiu pseudo
instructions by creating variants which support
less operands/accept GPR64Opnds as their operand in order
to appease the machine verifier pass.
Differential Revision: https://reviews.llvm.org/D53977
llvm-svn: 346133
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
When matching MipsISD::JmpLink t9, TargetExternalSymbol:i32'...',
wrong JALR16_MM is selected. This patch adds missing pattern for
JmpLink, so that JAL instruction is selected.
Differential Revision: https://reviews.llvm.org/D53366
llvm-svn: 345830
In MipsBranchExpansion::splitMBB, upon splitting
a block with two direct branches, remove the successor
of the newly created block (which inherits successors from
the original block) which is pointed to by the last
branch in the original block only if the targets of two
branches differ.
This is to fix the failing test when ran with
-verify-machineinstrs enabled.
Differential Revision: https://reviews.llvm.org/D53756
llvm-svn: 345821
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
When a landing pad is calculated in a program that is compiled
for micromips, it will point to an even address. Such an error will
cause a segmentation fault, as the instructions in micromips are
aligned on odd addresses. This patch sets the last bit of the offset
where a landing pad is, to 1, which will effectively be
an odd address and point to the instruction exactly.
Differential Revision: https://reviews.llvm.org/D52985
llvm-svn: 344591
When compiling static executable for micromips, CFI symbols
are incorrectly labeled as MICROMIPS, which cause
".eh_frame_hdr refers to overlapping FDEs." error.
This patch does not label CFI symbols as MICROMIPS, and FDEs do not
overlap anymore. This patch also exposes another bug, which is fixed
here: https://reviews.llvm.org/D52985
Differential Revision: https://reviews.llvm.org/D52987
llvm-svn: 344516
When compiling static executable for micromips, CFI symbols
are incorrectly labeled as MICROMIPS, which cause
".eh_frame_hdr refers to overlapping FDEs." error.
This patch does not label CFI symbols as MICROMIPS, and FDEs do not
overlap anymore. This patch also exposes another bug, which is fixed
here: https://reviews.llvm.org/D52985
Differential Revision: https://reviews.llvm.org/D52987
llvm-svn: 344511
Failure was discovered upon running
projects/compiler-rt/test/builtins/Unit/divtc3_test.c
in a stage2 compiler build.
When compiling projects/compiler-rt/lib/builtins/divtc3.c,
a call to fmaxl within the divtc3 implementation had its
return values read from registers $2 and $3 instead of $f0 and $f2.
Include fmaxl in the list of long double emulation routines
to have its return value correctly interpreted as f128.
Almost exact issue here: https://reviews.llvm.org/D17760
Differential Revision: https://reviews.llvm.org/D52649
llvm-svn: 344326
CodePointerSize and CalleeSaveStackSlotSize values are used in DWARF
generation. In case of MIPS it's incorrect to check for Triple::isMIPS64()
only this function returns true for N32 ABI too.
Now we do not have a method to recognize N32 if it's specified by a command
line option and is not a part of a target triple. So we check for
Triple::GNUABIN32 only. It's better than nothing.
Differential revision: https://reviews.llvm.org/D52874
llvm-svn: 344039
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Lower integer arguments larger then 32 bits for MIPS32.
setMostSignificantFirst is used in order for G_UNMERGE_VALUES and
G_MERGE_VALUES to always hold registers in same order, regardless of
endianness.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D52409
llvm-svn: 343315
Debian uses different triples for MIPS r6 and paths. Here we use SubArch
to determine whether it is r6, if we found `r6' in CPU section of triple.
These new triples include:
mipsisa32r6-linux-gnu
mipsisa32r6el-linux-gnu
mipsisa64r6-linux-gnuabi64
mipsisa64r6el-linux-gnuabi64
mipsisa64r6-linux-gnuabin32
mipsisa64r6el-linux-gnuabin32
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D50857
llvm-svn: 343185
The r337288 tried to fix result of icmp i1 when its input is not sanitized
by falling back to DagISel. While it now produces the correct result for
bit 0, the other bits can still hold arbitrary value which is not supported
by MipsFastISel branch lowering. This patch fixes the issue by falling back
to DagISel in this case.
Patch by Dragan Mladjenovic.
Differential Revision: https://reviews.llvm.org/D52045
llvm-svn: 342884
The patch extends size reduction pass for MicroMIPS. Two MOVE
instructions are transformed into one MOVEP instrucition.
Patch by Milena Vujosevic Janicic.
Differential revision: https://reviews.llvm.org/D52037
llvm-svn: 342572
The patch fixes definition of MOVEP instruction. Two registers are used
instead of register pairs. This is necessary as machine verifier cannot
handle register pairs.
Patch by Milena Vujosevic Janicic.
Differential revision: https://reviews.llvm.org/D52035
llvm-svn: 342571
Add support mips64(el)-linux-gnuabin32 triples, and set them to N32.
Debian architecture name mipsn32/mipsn32el are also added. Set
UseIntegratedAssembler for N32 if we can detect it.
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51408
llvm-svn: 342416
This implements suggesting alternative mnemonics when an invalid one is
specified. For example `addru $9, $6, 17767` leads to the following
error message:
error: unknown instruction, did you mean: add, addiu, addu, maddu?
Differential revision: https://reviews.llvm.org/D40646
llvm-svn: 342119
An fp_to_sint node would be incorrectly lowered to a TruncIntFP node in
single-float mode. This would trigger an "Unexpected illegal type!"
assert.
Patch by Dan Ravensloft.
Differential revision: https://reviews.llvm.org/D51810
llvm-svn: 341952
MIPS ISAs start to support third operand for the `rdhwr` instruction
starting from Revision 6. But LLVM generates assembler code with
three-operands version of this instruction on any MIPS64 ISA. The third
operand is always zero, so in case of direct code generation we get
correct code.
This patch fixes the bug by adding an instruction alias. The same alias
already exists for 32-bit ISA.
Ideally, we also need to reject three-operands version of the `rdhwr`
instruction in an assembler code if ISA revision is less than 6. That is
a task for a separate patch.
This fixes PR38861 (https://bugs.llvm.org/show_bug.cgi?id=38861)
Differential revision: https://reviews.llvm.org/D51773
llvm-svn: 341919
This patch modifies hasStandardEncoding() / inMicroMipsMode() /
inMips16Mode() methods of the MipsSubtarget class so only one can be
true at any one time. That prevents the selection of microMIPS and MIPS
instructions and patterns that are defined in TableGen files at the same
time. A few new patterns and instruction definitions hae been added to
keep test cases passed.
Differential revision: https://reviews.llvm.org/D51483
llvm-svn: 341338
The `mtc1` and `mfc1` definitions in the MipsInstrFPU.td have MMRel,
but do not have StdMMR6Rel tags. When these instructions are emitted
for microMIPS R6 targets, `Mips::MipsR62MicroMipsR6` nor
`Mips::Std2MicroMipsR6` cannot find correct op-codes and as a result the
backend uses mips32 variant of the instructions encoding.
The patch fixes this problem by adding the StdMMR6Rel tag and check
instructions encoding in the test case.
Differential revision: https://reviews.llvm.org/D51482
llvm-svn: 341221
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
MipsSEInstrInfo class defines for internal purpose unconditional
branches as Mips::B nad Mips:J even in case of microMIPS code
generation. Under some conditions that leads to the bug - for rather long
branch which fits to Mips jump instruction offset size, but does not fit
to microMIPS jump offset size, we generate 'short' branch and later show
an error 'out of range PC16 fixup' after check in the isBranchOffsetInRange
routine.
Differential revision: https://reviews.llvm.org/D50615
llvm-svn: 340932
Involves microMIPS's jump in the analyzable branch set to reduce some
code patterns.
Differential revision: https://reviews.llvm.org/D50613
llvm-svn: 340931
For a certain combination of options, BuildPairF64_{64}, ExtractElementF64{_64}
may be expanded into instructions using stack.
Add implicit operand $sp for such cases so that ShrinkWrapping doesn't move
prologue setup below them.
Fixes MultiSource/Benchmarks/MallocBench/cfrac for
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfpxx -mnan=2008'
and
'--target=mips-img-linux-gnu -mcpu=mips32r6 -mfp64 -mnan=2008 -mno-odd-spreg'.
Differential Revision: https://reviews.llvm.org/D50986
llvm-svn: 340927
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Lower integer arguments smaller than i32.
Support both register and stack arguments.
Define setLocInfo function for setting LocInfo field in ArgLocs vector.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51031
llvm-svn: 340572
Add patterns for unhandled CondCode enumerables:
SETEQ, SETGE, SETGT, SETLE, SETLT, SETNE.
Stated at the ISD::CondCode enum declaration:
`All of these (except for the 'always folded ops')
should be handled for floating point.`
Add patterns which use these nodes, same as corresponding
'ordered' CondCode nodes.
Referring to 'Ordered means that neither operand is a QNAN'
we assume it is safe to match ex. SETLT node to the same
instruction as SETOLT.
Differential Revision: https://reviews.llvm.org/D50757
llvm-svn: 340392
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
When potential jump instruction and target are in the same segment, use
jump instruction with immediate field.
In cases where offset does not fit immediate value of a bc/j instructions,
offset is stored into register, and then jump register instruction is used.
Differential Revision: https://reviews.llvm.org/D48019
llvm-svn: 339126
Override getTypeForExtReturn so that functions returning
an i32 typed value have it sign extended on MIPS64.
Also provide patterns to get rid of unneeded sign extensions
for arithmetic instructions which implicitly sign extend
their results.
Differential Revision: https://reviews.llvm.org/D48374
llvm-svn: 338019
Add support for lowering pointer arguments.
Changing type from pointer to integer is already done in
MipsTargetLowering::getRegisterTypeForCallingConv.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D49419
llvm-svn: 337912
The target independent AsmParser doesn't recognise .hword, .word, .dword
which are required for Mips. Currently MipsAsmParser recognises these
through dispatch to MipsAsmParser::parseDataDirective. This contains
equivalent logic to AsmParser::parseDirectiveValue. This patch allows
reuse of AsmParser::parseDirectiveValue by making use of
addAliasForDirective to support .hword, .word and .dword.
Original patch provided by Alex Bradbury at D47001 was modified to fix
handling of microMIPS symbols. The `AsmParser::parseDirectiveValue`
calls either `EmitIntValue` or `EmitValue`. In this patch we override
`EmitIntValue` in the `MipsELFStreamer` to clear a pending set of
microMIPS symbols.
Differential revision: https://reviews.llvm.org/D49539
llvm-svn: 337893
For the final DTPREL addition, rather than a lui/daddiu/daddu triple,
LLVM was erronously emitting a daddiu/daddiu pair, treating the %dtprel_hi
as if it were a %dtprel_lo, since Mips::Hi expands unshifted for Sym64.
Instead, use a new TlsHi node and, although unnecessary due to the exact
structure of the nodes emitted, use TlsHi for local exec too to prevent
future bugs. Also garbage-collect the unused TprelLo and TlsGd nodes,
and TprelHi since its functionality is provided by the new common TlsHi node.
Patch by James Clarke.
Differential revision: https://reviews.llvm.org/D49259
llvm-svn: 337827
This is a follow-up to the rL335185. Those commit adds some WrapperPat
patterns for microMIPS target. But declaration of the WrapperPat class
is under the NotInMicroMips predicate and microMIPS patterns cannot be
selected because predicate (Subtarget->inMicroMipsMode()) &&
(!Subtarget->inMicroMipsMode()) is always false.
This change move out the WrapperPat class declaration from the
NotInMicroMips predicate and enables microMIPS WrapperPat patterns.
Differential revision: https://reviews.llvm.org/D49533
llvm-svn: 337646
This is a follow-up to the rL337171. This patch fixes regression
introduced by the r337171 and enables MipsTruncIntFP pattern.
Differential revision: https://reviews.llvm.org/D49469
llvm-svn: 337392
The Mips FastISel back-end does not extend i1 values while lowering icmp.
Ensure that we bail into DAG ISel when handling this case.
Patch by Dragan Mladjenovic.
Differential Revision: https://reviews.llvm.org/D49290
llvm-svn: 337288
Instead, the pattern is tagged with the correct predicate when
it is declared. Some patterns have been duplicated as necessary.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D48365
llvm-svn: 337171
Add code for selection of G_LOAD, G_STORE, G_GEP, G_FRAMEINDEX and
G_CONSTANT. Support loads and stores of i32 values.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D48957
llvm-svn: 337168
This re-applies r336929 with a fix to accomodate for the Mips target
scheduling multiple SelectionDAG instances into the pass pipeline.
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336964
Mark standard encoded instructions and pseudo "standard encoded"
as not being in MIPS16e by default.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D48379
llvm-svn: 336893
This mostly brings the P5600 scheduler model to a mostly complete
status. There are a number of instructions which trigger the
`error:'MipsP5600Model' lacks information for` error. These are certain
codegen only instructions relating to MIPS64 which can be addressed by
using the correct predicates for them. That will be done in a full-up
patch.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D45245
llvm-svn: 336802
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the stores can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This version addresses issues with the initial implementation and covers
all atomic operations.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Patch By: Simon Dardis
Differential Revision: https://reviews.llvm.org/D31287
llvm-svn: 336328
CRC and GINV ASE require revision 6, Virtualization requires revision 5.
Print a warning when revision is older than required.
Differential Revision: https://reviews.llvm.org/D48843
llvm-svn: 336296
Lower more than 4 arguments using stack. This patch targets MIPS32.
It supports only functions with arguments of type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D47934
llvm-svn: 336185
This change fixes the issue that arises when we duplicate condition from
the predecessor block. If the condition's arguments are not considered alive
across the blocks, fast regalloc gets confused and starts generating reloads
from the slots that have never been spilled to. This change also leads to
smaller code given that, unlike on architectures with condition codes, on
Mips we can branch directly on register value, thus we gain nothing by
duplication.
Patch by Dragan Mladjenovic.
Differential Revision: https://reviews.llvm.org/D48642
llvm-svn: 336084
There are quite a few if statements that enumerate all these cases. It gets
even worse in our fork of LLVM where we also have a Triple::cheri (which
is mips64 + CHERI instructions) and we had to update all if statements that
check for Triple::mips64 to also handle Triple::cheri. This patch helps to
reduce our diff to upstream and should also make some checks more readable.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D48548
llvm-svn: 335493
These are identical but use microMIPS instructions instead of MIPS instructions.
Also, flatten the 'let AdditionalPredicates = [InMicroMips]' by using the
ISA_MICROMIPS adjective. Add tests for constant materialization.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D48275
llvm-svn: 335185
There are no provided instruction definitions for this architecture.
Reviewers: smaksimovic, atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D48320
llvm-svn: 335057
Previously, some aliases were marked as not being available for microMIPS32R6,
but this was overridden at the top level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D48321
llvm-svn: 335053
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
It introduces reduction of two instructions into one instruction:
Two SW instructions are transformed into one SWP instrucition.
Two LW instructions are transformed into one LWP instrucition.
Differential Revision: https://reviews.llvm.org/D39115
llvm-svn: 334595
Extend LONG_BRANCH_LUi and LONG_BRANCH_ADDiu pseudo instructions with
additional flag, so instead of always lowering to lui %hi(...),
addiu %lo(...) or addiu %hi(...), now they can lower to either %lo, %hi,
%higher or %highest depending on the added flag.
Differential Revision: https://reviews.llvm.org/D47941
llvm-svn: 334490
When program is compiled for mips3 with n64 abi, wrong register class
is used for creating an emergency spill slot. This patch fixes the
correct register class to be chosen.
This patch resolves PR35859.
Thanks to John Baldwin for reporting the issue!
Differential Revision: https://reviews.llvm.org/D47938
llvm-svn: 334419
isORCopyInst and isReadOrWriteToDSPReg functions were producing warning
that some statements my fall through.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47876
llvm-svn: 334194
Make TII isCopyInstr() return MachineOperands through pointer to pointer
instead via reference.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47364
llvm-svn: 334105
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Add minimal support to lower function calls.
Support only functions with arguments/return that go through registers
and have type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D45627
llvm-svn: 334071
Summary: As it turns out, the lowering for the Mips16* family of target is the exact same thing as what the ops expands to, so the code handling them can be removed and the ops only enabled for the MipsSE* family of targets.
Reviewers: smaksimovic, atanasyan, abeserminji
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D47703
llvm-svn: 334052
The `MipsAsmParser::loadImmediate` can load immediates of various sizes
into a register. Idea of this change is to use `loadImmediate` in the
`MipsAsmParser::expandMemInst` method to load offset into a register and
then call required load/store instruction.
The patch removes separate `expandLoadInst` and `expandStoreInst`
methods and does everything in the `expandMemInst` method to escape code
duplication.
Differential Revision: https://reviews.llvm.org/D47316
llvm-svn: 333774
Supporting GOT and TLS related relocations by the `.reloc` directive is
useful for purpose of testing various tools like a linker, for example.
llvm-svn: 333773
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Previously PredicateControl in some cases was a member of <X>Inst classes
for some X (DSP, EVA) or was in more irregular place in the hierarchry
for any given instruction.
This patch moves PredicateControl down to the root so that it is consistently
available. Then correct the base class of microMIPS instructions as using
EncodingPredicates instead of the general Predicates field of Instruction.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D47526
llvm-svn: 333536
As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
llvm-svn: 333440
Now LLVM assembler cannot process the following code and generates an
error. GNU tools support .set assignment directive with numeric register
name.
```
.set r4, 4
test.s:1:11: error: invalid token in expression
.set r4, $4
^
```
This patch teach assembler to handle such directives correctly.
Unfortunately a numeric register name cannot be represented as an
expression. That's why we have to maintain a separate `StringMap`
in the `MipsAsmParser` to keep mapping between aliases names and
register numbers.
Differential revision: https://reviews.llvm.org/D47464
llvm-svn: 333428
Emit R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_LO16 and
R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_HI16 chains of
relocations for %lo(%neg(%gp_rel())) and %hi(%neg(%gp_rel()))
expressions in case of microMIPS.
Differential Revision: http://reviews.llvm.org/D47220
llvm-svn: 333409
Emit R_MICROMIPS_HIGHER / R_MICROMIPS_HIGHEST relocations for %higher()
and %highest() expressions in case of microMIPS. These relocations do
exactly the same things as R_MIPS_HIGHER / R_MIPS_HIGHEST, but for
consistency it's better to write microMIPS variants.
Differential Revision: http://reviews.llvm.org/D47219
llvm-svn: 333407
Previously, their listed predicates were overridden at the scope level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46947
llvm-svn: 333405
Before this fix the following code triggers two error messages. The
second one is at least useless:
test.s:1:9: error: expected identifier after .set
.set 123, $a0
^
test-set.s:1:9: error: unexpected token, expected comma
.set 123, $a0
^
llvm-svn: 333402
Rather than using a regpair operand of these instructions, use two seperate
operands and a custom converter to handle the implicit second register operand.
Additionally, remove the microMIPS32R6 definition as its redundant.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47255
llvm-svn: 333288
r333093 introduced several warnings (-Wlogical-not-parentheses,
-Wbool-compare).
Adding parentheses in MipsSEInstrInfo::isCopyInstr() to silence it.
llvm-svn: 333097
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332977
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332834
Previously the compiler was using the microMIPSR3 variants, incorrectly.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46948
llvm-svn: 332820
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Add support for this target hook, covering MIPS, microMIPS and MIPSR6, along
with some tests. Also add missing getOppositeBranchOpc() cases exposed by the
tests.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46794
llvm-svn: 332446
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Introduced a new pattern for matching splat.d explicitly.
Both splat.d and splati.d can now be generated from the @llvm.mips.splat.d
intrinsic depending on whether an immediate value has been passed.
Differential Revision: https://reviews.llvm.org/D45683
llvm-svn: 331771
And eliminatw the duplication of those instructions for microMIPS32r6.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D46117
llvm-svn: 331526
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
The previous version of this patch restricted the 'jal' instruction to MIPS and
microMIPSr3. microMIPS32r6 does not have this instruction and instead uses jal
as an alias for balc.
Original commit message:
> Reviewers: smaksimovic, atanasyan, abeserminji
>
> Differential Revision: https://reviews.llvm.org/D46114
>
llvm-svn: 331259
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
These branches were previously unanalyzable and unselectable. Add them and
recognize how to generate their inverses.
Reviewers: smaksimovic, atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D46113
llvm-svn: 331050
This patch makes compiler does not fuse fmul and fadd/fsub into
fmadd/fmsub by default. Instead, -fp-contract=fast option can
be used when such behavior is desired.
Differential Revision: https://reviews.llvm.org/D46057
llvm-svn: 331033
`lb` and `lbu` commands accepts 16-bit signed offsets. But GAS accepts
larger offsets for these commands. If an offset does not fit in 16-bit
range, `lb` command is translated into lui/lb or lui/addu/lb series.
It's interesting that initially LLVM assembler supported this feature,
but later it was broken.
This patch restores support for 32-bit offsets. It replaces `mem_simm16`
operand for `LB` and `LBu` definitions by the new `mem_simmptr` operand.
This operand is intended to check that offset fits to the same size as
using for pointers. Later we will be able to extend this rule and
accepts 64-bit offsets when it is possible.
Some issues remain:
- The regression also affects LD, SD, LH, LHU commands. I'm going
to fix them by a separate patch.
- GAS accepts any 32-bit values as an offset. Now LLVM accepts signed
16-bit values and this patch extends the range to signed 32-bit offsets.
In other words, the following code accepted by GAS and still triggers
an error by LLVM:
```
lb $4, 0x80000004
# gas
lui a0, 0x8000
lb a0, 4(a0)
```
- In case of 64-bit pointers GAS accepts a 64-bit offset and translates
it to the li/dsll/lb series of commands. LLVM still rejects it.
Probably this feature has never been implemented in LLVM. This issue
is for a separate patch.
```
lb $4, 0x800000001
# gas
li a0, 0x8000
dsll a0, a0, 0x14
lb a0, 4(a0)
```
Differential Revision: https://reviews.llvm.org/D45020
llvm-svn: 330983
Correct the definitions of ei, di, eret, deret, wait, syscall and break.
Also provide microMIPS specific aliases to match the MIPS aliases.
Additionally correct the definition of the wait instruction so that
it is present in the instruction mapping tables.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45939
llvm-svn: 330952
ISel is currently picking 'JAL' over 'JAL_MM' for calling a function when
targeting microMIPS. A later patch will correct this behaviour.
This patch extends the mechanism for transforming instructions into their short
delay to recognise 'JAL_MM' for transforming into 'JALS_MM'.
llvm-svn: 330825
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Current code does not check that a register number is in the 0-31 range.
Sometimes the parser checks that later for some kinds of instructions,
but that leads to unclear / incorrect error messages like that:
% cat test.s
.text
lb $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
test.s:2:10: error: expected memory with 16-bit signed offset
lb $4, 8($32)
^
Sometimes the parser just crashes:
% cat test.s
.text
lw $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
This patch resolves the problem by checking that register number after
'$' sign is in the 0-31 range. If the number is out of the range the
parser shows the `invalid register number` error, but treats invalid
register number as a normal one to continue parsing and catch other
possible errors.
Differential Revision: https://reviews.llvm.org/D45919
llvm-svn: 330732
Guard the MIPS64 variant correctly for i64, mark the MIPS32 version as not
in microMIPS and provide the microMIPS version.
Additionally, remove a related stale XFAIL'd test as bswap has its own test
case providing coverage.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45816
llvm-svn: 330705
These instructions lacked the correct predicates, were not marked
as loads and stores and lacked the proper instruction mapping information.
In the case of microMIPS sw(l|r)e (EVA) these instructions were using the load
EVA description.
Reviewers: abeserminji, smaksimovic, atanasyan
Differential Revision: https://reviews.llvm.org/D45626
llvm-svn: 330326
Previously, the MIPS backend would alwyas break down constant multiplications
into a series of shifts, adds, and subs. This patch changes that so the cost of
doing so is estimated.
The cost is estimated against worst case constant materialization and retrieving
the results from the HI/LO registers.
For cases where the value type of the multiplication is not legal, the cost of
legalization is estimated and is accounted for before performing the
optimization of breaking down the constant
This resolves PR36884.
Thanks to npl for reporting the issue!
Reviewers: abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D45316
llvm-svn: 330037
Add the minimal support necessary to lower a function that returns the
sum of two i32 values.
Support argument/return lowering of i32 values through registers only.
Add tablegen for regbankselect and instructionselect.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D44304
llvm-svn: 329819
Summary:
Replace ArrayRefs by actual std::array objects so that there are
no dangling references.
Reviewers: rsmith, gkistanova
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45338
llvm-svn: 329359
For schedule models that don't use itineraries, checkCompleteness still checks that an instruction has a matching itinerary instead of skipping and going straight to matching the InstRWs. That doesn't seem to match what happens in TargetSchedule.cpp
This patch causes problems for a number of models that had been incorrectly flagged as complete.
Differential Revision: https://reviews.llvm.org/D43235
llvm-svn: 329280
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: sdardis, RKSimon, dsanders, atanasyan
Reviewed By: atanasyan
Subscribers: atanasyan, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D44869
llvm-svn: 328815
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
I believe the role of ehDataReg has been replaced by MipsABIInfo::GetEhDataReg, thus removing the dead code.
Patch By: Wei-Ren Chen.
Reviewers: ehostunreach, sdardis
Differential Revision: https://reviews.llvm.org/D44867
llvm-svn: 328767
Summary:
I recently added a new Fixup kind to our fork of LLVM but forgot to add
it to the table in MipsAsmBackend.cpp. With this static_assert the error
would have been caught instead of zero-initializing the array entries for
the new fixups.
Reviewers: sdardis, atanasyan
Reviewed By: atanasyan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44895
llvm-svn: 328616
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
For the MIPS O32 ABI, the current call lowering logic naively lowers each
call, creating the reserved argument area to hold the argument spill areas for
$a0..$a3 and the outgoing parameter area if one is required at each call site.
In the case of a sufficently large byval argument, a call to memcpy is used
to write the start+16..end of the argument into the outgoing parameter area.
This is done within the CALLSEQ_START..CALLSEQ_END of the callee. The CALLSEQ
nodes are responsible for performing the necessary stack adjustments.
Since the O32/N32/N64 MIPS ABIs do not have a red-zone and writing below the
stack pointer and reading the values back is unpredictable, the call to memcpy
cannot be hoisted out of the callee's CALLSEQ nodes.
However, for the O32 ABI requires the reserved argument area for functions
which have parameters. The naive lowering of calls will then create nested
CALLSEQ sequences. For N32 and N64 these nodes are also created, but with
zero stack adjustments as those ABIs do not have a reserved argument area.
This patch addresses the correctness issue by recognizing the special case
of lowering a byval argument that uses memcpy. By recognizing that the
incoming chain already has a CALLSEQ_START node on it when calling memcpy,
the CALLSEQ nodes are not created. For the N32 and N64 ABIs, this is not an
issue, as no stack adjustment has to be performed.
For the O32 ABI, the correctness reasoning is different. In the case of a
sufficently large byval argument, registers a0..a3 are going to be used for
the callee's arguments, mandating the creation of the reserved argument area.
The call to memcpy in the naive case will also create its own reserved
argument area. However, since the reserved argument area consists of undefined
values, both calls can use the same reserved argument area.
Reviewers: abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D44296
llvm-svn: 327388
This simplifies tagging instructions with the correct ISA and ASE, albeit making
instruction definitions a bit more verbose.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44299
llvm-svn: 327265
These instructions are defined as taking a GPR register and a
coprocessor register for ISAs up to MIPS32. MIPS32 extended the
definition to allow a selector--a value from 0 to 32--to access
another register.
These instructions are now internally defined as being MIPS-I
instructions, but are rejected for pre-MIPS32 ISA's if they have
an explicit selector which is non-zero. This deviates slightly from
GAS's behaviour which rejects assembly instructions with an
explicit selector for pre-MIPS32 ISAs.
E.g:
mfc0 $4, $5, 0
is rejected by GAS for MIPS-I to MIPS-V but will be accepted
with this patch for MIPS-I to MIPS-V.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41662
llvm-svn: 326890
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
The MIPS backend has inconsistent usage of instruction predicates
for assembly and code generation. The issue arises from supporting three
encodings, two (MIPS and microMIPS) of which have a near 1:1 instruction
mapping across ISA revisions and a third encoding with a more restricted
set of instructions (MIPS16e).
To enforce consistent usage, each of the ISA_* adjectives has (or will
have) the relevant encoding attached to it along the relevant ISA revision
where the instruction is defined.
Each instruction, pattern or alias will then have the correct ISA adjective
attached to it, and the base instruction description classes will have any
predicates relating to ISA encoding or revision removed.
Pseudo instructions will also be guarded for the encoding or ABI that they are
supported in.
Finally, the hasStandardEncoding() / inMicroMipsMode() / inMips16Mode() methods
of MipsSubtarget will be changed such that only one can be true at any one time.
The result of this is that code generation and assembly will produce the
correct encoding up front, while code generated from pseudo instructions
and other inserted sequences of instructions will be able to rely on the mapping
tables to produce the correct encoding. This should fix numerous bugs where
the result 'happens' to be correct but has edge cases where microMIPS and MIPS
have subtle differences (e.g. microMIPSR6 using 'j', 'jal' instructions.)
This patch starts the process by changing most of the ISA adjectives to make
use of the EncodingPredicate member of PredicateControl. Follow on patches
will annotate instructions with their correct ISA adjective and eliminate
the usage of "let Predicates = [..]", "let AdditionalPredicates = [..]" and
"isCodeGenOnly = 1" in the cases where it was used to control instruction
availability.
Contributions from Nitesh Jain.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41434
llvm-svn: 326322
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Add GlobalISel infrastructure up to the point where we can select a ret
void.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D43583
llvm-svn: 325888
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Simon Dardis
llvm-svn: 325870
There were no memory dependencies made between stores generated
when lowering formal arguments and loads generated when
call lowering byVal arguments which made the Post-RA scheduler
place a load before a matching store.
Make the fixed object stored to mutable so that the load
instructions can have their memory dependencies added
Set the frame object as isAliased which clears the underlying
objects vector in ScheduleDAGInstrs::buildSchedGraph().
This results in addition of all stores as dependenies for loads.
This problem appeared when passing a byVal parameter
coupled with a fastcc function call.
Differential Revision: https://reviews.llvm.org/D37515
llvm-svn: 325782
This patch provides mitigation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLVM part of
-mindirect-jump=hazard. It is _not_ enabled by default for the P5600.
The migitation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are used with the attribute +use-indirect-jump-hazard
when branching indirectly and for indirect function calls.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
Performance benchmarking of this option with -fpic and lld using
-z hazardplt shows a difference of overall 10%~ time increase
for the LLVM testsuite. Certain benchmarks such as methcall show a
substantially larger increase in time due to their nature.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D43486
llvm-svn: 325653
An upcoming patch D41434, changes the ordering of the matcher table
for assembly. This patch corrects the definition of the normal MIPS
cvt.d.w not to be available in microMIPS.
llvm-svn: 325589
These instructions conflict with their full length variants
for the purposes of FastISel as they cannot be distingushed
based on the number and type of operands and predicates.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41285
llvm-svn: 325341
In case of correct using of the 'l' constraint llvm now generates valid
code; otherwise it shows an error message. Initially these triggers an
assertion.
This commit is the same as r324869 with fixed the test's file name.
llvm-svn: 324885
In case of correct using of the 'l' constraint llvm now generates valid
code; otherwise it shows an error message. Initially these triggers an
assertion.
llvm-svn: 324869
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
Both operand codes now work the same way in case of register or memory
operands. It print high-order or low-order word in a double-word
register or memory location.
llvm-svn: 324476
This patch includes EVA instructions in the Std2MicroMips mapping
tables, which is required for direct object emission.
Differential Revision: https://reviews.llvm.org/D41771
llvm-svn: 323958
PR36061 showed that during the expansion of ISD::FPOWI, that there
was an incorrect zero extension of the integer argument which for
MIPS64 would then give incorrect results. Address this with the
existing mechanism for correcting sign extensions.
This resolves PR36061.
Thanks to James Cowgill for reporting the issue!
Reviewers: atanasyan, hfinkel
Differential Revision: https://reviews.llvm.org/D42537
llvm-svn: 323781
Previously some targets printed their own message at the start of Select to indicate what they were selecting. For the targets that didn't, it means there was no print of the root node before any custom handling in the target executed. So if the target did something custom and never called SelectNodeCommon, no print would be made. For the targets that did print a message in Select, if they didn't custom handle a node SelectNodeCommon would reprint the root node before walking the isel table.
It seems better to just print the message before the call to Select so all targets behave the same. And then remove the root node printing from SelectNodeCommon and just leave a message that says we're starting the table search.
There were also some oddities in blank line behavior. Usually due to a \n after a call to SelectionDAGNode::dump which already inserted a new line.
llvm-svn: 323551
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
Dsp and dspr2 require MIPS revision 2, while msa requires revision 5. Adding
warnings for cases when these flags are used with earlier revision.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D40490
llvm-svn: 323131
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Initially, if the `c` constraint applied to the wrong data type that
causes LLVM to assert. This commit replaces the assert by an error
message.
llvm-svn: 321565
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
This instruction is encoded as zero, so we have handle that case when checking
for unimplemented opcodes when producing the encoding for an instruction.
llvm-svn: 321066
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
This version has the correct commit message.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41183
llvm-svn: 320991
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
Reviewers: atanasyan
https://reviews.llvm.org/D41183
llvm-svn: 320974
MIPSR6 introduced several new jump instructions and deprecated
the use of the 'j' instruction. For microMIPS32R6, 'j' was removed
entirely and it only has non delay slot jumps.
This patch adds support for MIPSR6 by using some R6 instructions--
'bc' instead of 'j', 'jic $reg, 0' instead of 'jalr $zero, $reg'--
and modifies the sequences not to use delay slots for R6.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: dschuff, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D40786
llvm-svn: 320703
Previously, v2i16 -> f32 bitcast could not be matched.
Add patterns to support matching this and similar types of bitcasts.
Differential revision: https://reviews.llvm.org/D40959
llvm-svn: 320562
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
Both had a declaration of EmitXRayTable, but there is no method defined in either with that name. There is a emitXRayTable in the base class with a lower case 'e' and they both call that.
llvm-svn: 320213
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
Make the print format consistent with other assembler instructions.
Adding a tab character instead of space in asmstring of Ext and Ins
instructions.
Removing space around the tab character for JALRC and replacing space with
tab in JRC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38144
llvm-svn: 319030
This patch fixes an issue where microMIPS ASE flag is not set
when a function has micromips attribute or when .set micromips
directive is used.
Differential Revision: https://reviews.llvm.org/D40316
llvm-svn: 318948
The MIPS delay slot filler converts delay slot branches into compact
forms for the MIPS ISAs which support them. For branches that compare
(in)equality with with zero, it converts them into branches with implict
zero register operands. These branches have a slightly greater range
than normal two register operands branches.
Changing the branches at this point in the pipeline offers the long
branch pass the ability to mark better judgements if a long branch
sequence is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D40314
llvm-svn: 318908
Move the hazard scheduling pass to after the long branch pass, as the
long branch pass can create forbiddden slot hazards. Rather than complicating
the implementation of the long branch pass to handle forbidden slot hazards,
just reorder the passes.
llvm-svn: 318657
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
APInt is now used instead of uint64_t in function genConstMult() allowing
multiplication optimizations with constants of arbitrary length.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38130
llvm-svn: 318296
This adjusts the tests to hopfully pacify the
llvm-clang-x86_64-expensive-checks-win buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 318207
Correct the definition of 'j' as being unavailable for microMIPS32R6 and
provide the 'b' assembly idiom for codegen purposes for microMIPS32r3.
Provide the necessary 'br' pattern for microMIPS32R6 as it now longer
incorrectly uses the 'j' instruction.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39741
llvm-svn: 317801
Previously these pseudo instructions were not guarded by ISA, so their
select was dependant on the ordering of the entries in the DAG matcher.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39723
llvm-svn: 317681
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Previously, the 'movep' instruction was defined for microMIPS32r3 and
shared that definition with microMIPS32R6. 'movep' was re-encoded for
microMIPS32r6, so this patch provides the correct encoding.
Secondly, correct the encoding of the 'rs' and 'rt' operands which have
an instruction specific encoding for the registers those operands accept.
Finally, correct the decoding of the 'dst_regs' operand which was extracting
the relevant field from the instruction, but was actually extracting the
field from the alreadly extracted field.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39495
llvm-svn: 317475
Mark all symbols involved with TLS relocations as being TLS symbols.
This resolves PR35140.
Thanks to Alex Crichton for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39591
llvm-svn: 317470
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
Change the ISel matching of 'ins', 'dins[mu]' from tablegen code to
C++ code. This resolves an issue where ISel would select 'dins' instead
of 'dinsm' when the instructions size and position were individually in
range but their sum was out of range according to the ISA specification.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39117
llvm-svn: 317331
MSA stores and loads to the stack are more likely to require an
emergency GPR spill slot due to the smaller offsets available
with those instructions.
Handle this by overestimating the size of the stack by determining
the largest offset presuming that all callee save registers are
spilled and accounting of incoming arguments when determining
whether an emergency spill slot is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39056
llvm-svn: 317204
These instructions were previously marked as codegen only preventing
them from being assembled as microMIPS or disassembled.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D39123
llvm-svn: 316656
PR35071 exposed the fact that MipsInstrInfo::removeBranch did not walk past
debug instructions when removing branches for the control flow optimizer, which
lead to duplicated conditional branches. If the target of the branch was a
removable block, only the conditional branch in the terminating position would
have it's MBB operands updated, leaving the first branch with a dangling MBB
operand. The MIPS long branch pass would then trigger an assertion when
attempting to examine the instruction with dangling MBB operand.
This resolves PR35071.
Thanks to Alex Richardson for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39288
llvm-svn: 316654
Infrastructure designed for padding code with nop instructions in key places such that preformance improvement will be achieved.
The infrastructure is implemented such that the padding is done in the Assembler after the layout is done and all IPs and alignments are known.
This patch by itself in a NFC. Future patches will make use of this infrastructure to implement required policies for code padding.
Reviewers:
aaboud
zvi
craig.topper
gadi.haber
Differential revision: https://reviews.llvm.org/D34393
Change-Id: I92110d0c0a757080a8405636914a93ef6f8ad00e
llvm-svn: 316413
In the case where there was a conditional branch followed by a unconditional
branch with debug instruction separating them, MipsInstrInfo::analyzeBranch
would not skip past debug instruction when searching for the second branch
which give erroneous results about the control flow of the block.
This could lead to the branch folder to merge the non-fall through case
into it's predecessor, leaving the conditional branch with a dangling
basic block operand.
This resolves PR34975.
Thanks to Alexander Richardson for reporting the issue!
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39003
llvm-svn: 316084
Previously these instructions were marked codegen only and had
an under-specified instruction description that did not record the
fcc register.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D38847
llvm-svn: 315905
Reverting to investigate layering effects of MCJIT not linking
libCodeGen but using TargetMachine::getNameWithPrefix() breaking the
lldb bots.
This reverts commit r315633.
llvm-svn: 315637
Merge LLVMTargetMachine into TargetMachine.
- There is no in-tree target anymore that just implements TargetMachine
but not LLVMTargetMachine.
- It should still be possible to stub out all the various functions in
case a target does not want to use lib/CodeGen
- This simplifies the code and avoids methods ending up in the wrong
interface.
Differential Revision: https://reviews.llvm.org/D38489
llvm-svn: 315633
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
Rather than using the AdditionalPredicates mechanism to guard
the microMIPS instructions, use the existing predicates to properly
guard those instructions.
This also resolves a case where an instruction pattern was incorrectly
available for microMIPS32R6, which caused a register allocation failure
as the registers specified in the pattern were not available.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38451
llvm-svn: 315362
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
Add instruction definitions for FP32 mode for recip.d and rsqrt.d.
Previously these instructions were only defined when targeting the
full 64-bit FPU model but were not guarded properly.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38400
llvm-svn: 315318
Previously, the parsing of the 'subu $reg, ($reg,) imm' relied on a parser
which also rendered the operand to the instruction. In some cases the
general parser could construct an MCExpr which was not a MCConstantExpr
which MipsAsmParser was expecting.
Address this by altering the special handling to cope with unexpected inputs
and fine-tune the handling of cases where an register name that is not
available in the current ABI is regarded as not a match for the custom parser
but also not as an outright error.
Also enforces the binutils restriction that only constants are accepted.
This partially resolves PR34391.
Thanks to Ed Maste for reporting the issue!
Reviewers: nitesh.jain, arichardson
Differential Revision: https://reviews.llvm.org/D37476
llvm-svn: 315310
ELFObjectWriter's constructor.
Fixes the same ownership issue for ELF that r315245 did for MachO:
ELFObjectWriter takes ownership of its MCELFObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315254
Implement .set dspr2 directive with appropriate feature bits. This
directive is a counterpart of -mattr=dspr2 command line option with the
exception that it does not influence elf header flags.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D38537
llvm-svn: 314994
Previously, instructions that were defined to use the FGR64 register class
were associated with the Mips64 table which was incorrect.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38454
llvm-svn: 314976
The dsp register class is an alias of the gpr register class, so
we have to define instructions for spilling and reloading.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D38038
llvm-svn: 314798
Fix nested callseq* nodes by moving callseq_start after the
arguments calculation to temporary registers, so that callseq* nodes
in resulting DAG are linear.
Recommitting r314497. This version does not contain test which fails
when compiler is not build in debug mode.
Differential Revision: https://reviews.llvm.org/D37328
llvm-svn: 314507
Add missing license information to MicroMipsInstrFPU.td and
fix most of the formatting errors present. Others will be
addressed in a follow up commits.
llvm-svn: 314505
Fix nested callseq* nodes by moving callseq_start after the
arguments calculation to temporary registers, so that callseq* nodes
in resulting DAG are linear.
Differential Revision: https://reviews.llvm.org/D37328
llvm-svn: 314497
This patch disables codegen support for branch likely instructions to
address a potential bug. These branches were unselectable as
they had the same patterns as the normal branches but came after them
when ISel was concerned.
The branch likely instructions were marked as having no delay
slots when they have annulling delay slots. The delay slot filler
does not currently handle annulling delay slot branches, so this
would lead to wrong codegen if these branches were generated.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D38169
llvm-svn: 314421
It's currently quite difficult to test passes like branch relaxation, which
requires branches with large displacement to be generated. The .space assembler
directive makes it easy to create arbitrarily large basic blocks, but
getInlineAsmLength is not able to parse it and so the size of the block is not
correctly estimated. Other backends (AArch64, AMDGPU) introduce options just
for testing that artificially restrict the ranges of branch instructions (e.g.
aarch64-tbz-offset-bits). Although parsing a single form of the .space
directive feels inelegant, it does allow a more direct testing approach.
This patch adapts the .space parsing code from
Mips16InstrInfo::getInlineAsmLength and removes it now the extra functionality
is provided by the base implementation. I want to move this functionality to
the generic getInlineAsmLength as 1) I need the same for RISC-V, and 2) I feel
other backends will benefit from more direct testing of large branch
displacements.
Differential Revision: https://reviews.llvm.org/D37798
llvm-svn: 314393
Now we pass the 'Is64_' flag to the MCELFObjectTargetWriter ctor iif
when we make deal with N64 ABI. So it is redundant to pass additional
'IsN64' flag.
llvm-svn: 313878
The N32 ABI uses RELA relocation format, do not use 3-in-1 relocation's
encoding, and uses ELFCLASS32. This change passes the `IsN32` flag
to the `MCAsmBackend` to distinguish usage of N32 ABI.
We still do not handle some cases like providing the `-target-abi=o32`
command line option with the `mips64` target triple. That's why
elf_header.s contains some "FIXME" strings. This case will be fixed in
a separate patch.
Differential revision: https://reviews.llvm.org/D37960
llvm-svn: 313873
If we have an AssertZext of a truncated value that has already been AssertZext'ed,
we can assert on the wider source op to improve the zext-y knowledge:
assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
This moves a fold from being Mips-specific to general combining, and x86 shows
improvements.
Differential Revision: https://reviews.llvm.org/D37017
llvm-svn: 313577
The other members of the dext family of instructions (dextm, dextu) are
traditionally handled by the assembler selecting the right variant of
'dext' depending on the values of the position and size operands.
When these instructions are disassembled, rather than reporting the
actual instruction, an equivalent aliased form of 'dext' is generated
and is reported. This is to mimic the behaviour of binutils.
Reviewers: slthakur, nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D34887
llvm-svn: 313276
Traditionally GAS has provided automatic selection between dins, dinsm and
dinsu. Binutils also disassembles all instructions in that family as 'dins'
rather than the actual instruction.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34877
llvm-svn: 313267
This patch complements D16810 "[mips] Make isel select the correct DEXT variant
up front.". Now ISel picks the right variant of DINS, so now there is no need
to replace DINS with the appropriate variant during
MipsMCCodeEmitter::encodeInstruction().
This patch also enables target specific instruction verification for ins, dins,
dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that
are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these
constraints are not checked during instruction selection. Adding machine
verification should catch outstanding cases.
Finally, correct a bug that instruction verification uncovered, where the
position operand of a DINSU generated during lowering was being silently
and accidently corrected to the correct value.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34809
llvm-svn: 313254
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
llvm-svn: 313149
Currently, UImm16_AltRelaxed match type is not handled in
MatchAndEmitInstruction() function, which may result in
llvm_unreachable() behavior.
This patch adds necessary case for this match type.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37682
llvm-svn: 313077
This change converts the `MipsAsmBackend` constructor to the "standard"
form. It makes possible to use `RegisterMCAsmBackend` for the backends
registrations. Now we pass `Triple` instance to the `MipsAsmBackend`
ctor and deduce all required options like endianness and bitness from
the triple. We still need to implement explicit ABI checking for
providing correct options to backends.
Differential revision: https://reviews.llvm.org/D37519
llvm-svn: 312720
This patch supports one more pattern for bbit0 and bbit1
instructions, CBranchBitNum class is expanded so it can
take 32 bit immidate.
Differential Revision: https://reviews.llvm.org/D36222
llvm-svn: 312111
This patch enables generation of NMADD and NMSUB instructions when fneg node
is present. These instructions are currently only generated if fsub node is
present.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34507
llvm-svn: 311862
If a variable has an explicit section such as .sdata or .sbss, it is placed
in that section and accessed in a gp relative manner. This overrides the global
-G setting.
Otherwise if a variable has a explicit section attached to it, such as '.rodata'
or '.mysection', it is not placed in the small data section. This also overrides
the global -G setting.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D36616
llvm-svn: 311001
Summary:
This is modeled on the implementation for x86 which stores the command line
option in a 'StackAlignOverride' field in MipsSubtarget and then uses this
to compute a 'stackAlignment' value in
MipsSubtarget::initializeSubtargetDependencies.
The stackAlignment() method in MipsSubTarget is renamed to getStackAlignment()
and returns the computed 'stackAlignment'.
Reviewers: sdardis
Reviewed By: sdardis
Subscribers: llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D35874
llvm-svn: 310891
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 310834
Summary:
The stack alignment depends on the ABI (16 bytes for N32 and N64 and 8
bytes for O32), not the CPU type.
Reviewers: sdardis
Reviewed By: sdardis
Subscribers: atanasyan, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D36326
llvm-svn: 310768
Post commit review of rL308619 highlighted the need for handling N64
with -fno-pic. Testing reveale a stale assert when generating a GP
relative addressing mode.
This patch removes that assert and adds the necessary patterns for
MIPS64 to perform gp relative addressing with -fno-pic
(and the implicit -mno-abicalls + -mgpopt).
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D36472
llvm-svn: 310713
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
Assert that a binary expression is actually a binary expression,
rather than potientially incorrectly attempting to handle it as a
unary expression.
This resolves PR34083.
Thanks to Simonn Pilgrim for reporting the issue!
llvm-svn: 310460
Author: milena.vujosevic.janicic
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Usage of u_int64_t replaced by uint64_t to avoid issues because of which previous patch version was reverted:
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 310044
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
This patch enables control flow optimization for
variations of BBIT instruction. In this case
optimization removes unnecessary branch after
BBIT instruction.
Differential Revision: https://reviews.llvm.org/D35359
llvm-svn: 309679
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
-membedded-data changes the location of constant data from the .sdata to
the .rodata section. Previously it was (incorrectly) always located in the
.rodata section.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D35686
llvm-svn: 308758
Follow up to r306280 in Clang.
Enable IAS by default for Android MIPS64 (uses N64 ABI).
Differential Revision: https://reviews.llvm.org/D35482
llvm-svn: 308742
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
This patch adds handling of the `long_call`, `far`, and `near`
attributes passed by front-end. The patch depends on D35479.
Differential revision: https://reviews.llvm.org/D35480.
llvm-svn: 308606
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
llvm-svn: 308301
If the `long-calls` feature flags is enabled, disable use of the `jal`
instruction. Instead of that call a function by by first loading its
address into a register, and then using the contents of that register.
Differential revision: https://reviews.llvm.org/D35168
llvm-svn: 308087
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Function InRange is changed to avoid left shifting of negative values, since
that caused some sanitizer tests to fail (so the previous patch
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 308011
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
llvm-svn: 307906
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
Petar Avramovic