This patch introduces a new infrastructure that is used to select the load and
store instructions in the PPC backend.
The primary motivation is that the current implementation of selecting load/stores
is dependent on the ordering of patterns in TableGen. Given this limitation, we
are not able to easily and reliably generate the P10 prefixed load and stores
instructions (such as when the immediates that fit within 34-bits). This
refactoring is meant to provide us with more control over the patterns/different
forms to exploit, as well as eliminating dependency of pattern declaration in TableGen.
The idea of this refactoring is that it introduces a set of addressing modes that
correspond to different instruction formats of a particular load and store
instruction, along with a set of common flags that describes a load/store.
Whenever a load/store instruction is being selected, we analyze the instruction
and compute a set of flags for it. The computed flags are then used to
select the most optimal load/store addressing mode.
This patch is the first of a series of patches to be committed - it contains the
initial implementation of the refactored load/store selection infrastructure and
also updates P8/P9 patterns to adopt this infrastructure. The idea is that
incremental patches will add more implementation and support, and eventually
the old implementation will be removed.
Differential Revision: https://reviews.llvm.org/D93370
Regiser types for xxsplti32dx for two td file patterns was incorrect.
Fixed the two types and added a test case that was reduced from a larger
failing test.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D100223
This patch exploits the xxsplti32dx instruction available on Power10
in place of constant pool loads where xxspltidp would not be able to,
usually because the immediate cannot fit into 32 bits.
Differential Revision: https://reviews.llvm.org/D95458
There are some instances where we produce constants of type MVT::i64
unconditionally in the target DAG combines. This is not actually
valid in 32-bit mode.
This pull request implements patterns to exploit the load rightmost vector
element instructions for loading element 0 on little endian PowerPC subtargets
into v8i16 and v16i8 vector registers for i16 and i8 data types.
Differential Revision: https://reviews.llvm.org/D94816#inline-921403
This patch generates the vinsw, vinsd, vinsblx, vinshlx, vinswlx, vinsdlx,
vinsbrx, vinshrx, vinswrx and vinsdrx instructions for vector insertion on P10.
Differential Revision: https://reviews.llvm.org/D94454
NOTE: This patch was originally written by Anil Mahmud. His code has been
rebased but otherwise left mostly unchanged.
A new instructon on Power 10 allows for the materialization of 34 bit
immediate values. This patch allows the compiler to take advantage of
the new instruction in this situation.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D92879
Exploits the instruction xxsplti32dx.
It can be used to materialize any 64 bit scalar/vector splat by using two instances, one for the upper 32 bits and the other for the lower 32 bits. It should not materialize the cases which can be materialized by using the instruction xxspltidp.
Differential Revision: https://https://reviews.llvm.org/D90173
The new Power10 instruction vsrq was being given the wrong shift vector.
The original code assumed that the shift would be found in bits 121 to 127.
This is not correct. The shift is found in bits 57 to 63.
This can be fixed by swaping the first and second double words.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D94113
Using the store rightmost vector element instructions to do vector
element extraction and store. The rightmost vector element on little
endian is the zeroth vector element, with these patterns that element
can be extracted and stored in one instruction for all vector types.
Differential Revision: https://reviews.llvm.org/D89195
On PPC, the vector pair instructions are independent from MMA.
This patch renames the vector pair LLVM intrinsics and Clang builtins to replace the _mma_ prefix by _vsx_ in their names.
We also move the vector pair type/intrinsic/builtin tests to their own files.
Differential Revision: https://reviews.llvm.org/D91974
This patch enables the Clang type __vector_pair and its associated LLVM
intrinsics even when MMA is disabled. With this patch, the type is now controlled
by the PPC paired-vector-memops option. The builtins and intrinsics will be
renamed to drop the mma prefix in another patch.
Differential Revision: https://reviews.llvm.org/D91819
The xxeval instruction was intorduced in Power PC in Power 10.
The instruction accepts three vector registers and an immediate.
Depending on the value of the immediate the instruction can be used
to perform certain bitwise boolean operations (and, or, xor, ...) on
the given vector registers.
This patch implements the AND and NAND patterns that can be used by
the instruction.
Reviewed By: nemanjai, #powerpc, bsaleil, NeHuang, jsji
Differential Revision: https://reviews.llvm.org/D92420
This patch implements the set boolean condition instructions introduced in
POWER10.
The set boolean condition instructions (set[n]bc[r]) are used during
the following situations:
- sign/zero/any extending i1 to an i32 or i64,
- reg+reg, reg+imm or floating point comparisons being sign/zero extended to i32 or i64,
- spilling CR bits (using the setnbc instruction)
Differential Revision: https://reviews.llvm.org/D87705
In this patch, Predicates fix added for the following:
* disable prefix-instrs will disable pcrelative-memops
* set two predicates PairedVectorMemops and PrefixInstrs for PLXVP/PSTXVP definitions
Differential Revision: https://reviews.llvm.org/D89727
Reviewed by: amyk, steven.zhang
This patch adds support for assemble disassemble intrinsics
for MMA.
Reviewed By: bsaleil, #powerpc
Differential Revision: https://reviews.llvm.org/D88739
This patch adds outer product instructions for MMA, including related infrastructure, and their tests.
Depends on D84968.
Reviewed By: #powerpc, bsaleil, amyk
Differential Revision: https://reviews.llvm.org/D88043
This patch legalizes the v256i1 and v512i1 types that will be used for MMA.
It implements loads and stores of these types.
v256i1 is a pair of VSX registers, so for this type, we load/store the two
underlying registers. v512i1 is used for MMA accumulators. So in addition to
loading and storing the 4 associated VSX registers, we generate instructions to
prime (copy the VSX registers to the accumulator) after loading and unprime
(copy the accumulator back to the VSX registers) before storing.
This patch also adds the UACC register class that is necessary to implement the
loads and stores. This class represents accumulator in their unprimed form and
allow the distinction between primed and unprimed accumulators to avoid invalid
copies of the VSX registers associated with primed accumulators.
Differential Revision: https://reviews.llvm.org/D84968
This patch adds the xxmfacc, xxmtacc and xxsetaccz instructions to manipulate
accumulator registers. It also adds the ACC register class definition for the
accumulator registers.
Differential Revision: https://reviews.llvm.org/D84847
This patch implements the vector string isolate (predicate and non-predicate
versions) builtins. The predicate builtins are custom selected within PPCISelDAGToDAG.
Differential Revision: https://reviews.llvm.org/D87671
This patch implements the 128-bit vector divide extended builtins in Clang/LLVM.
These builtins map to the vdivesq and vdiveuq instructions respectively.
Differential Revision: https://reviews.llvm.org/D87729
This patch adds support for the lxvp, lxvpx, plxvp, stxvp, stxvpx and pstxvp
instructions in the PowerPC backend. These instructions allow loading and
storing VSX register pairs. This patch also adds the VSRp register class
definition needed for these instructions.
Differential Revision: https://reviews.llvm.org/D84359
This patch implements the vec_gen[b|h|w|d|q]m function prototypes in altivec.h
in order to utilize the move to VSR with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82725
This patch adds the instruction definitions and assembly/disassembly tests for
the set boolean condition instructions. This also includes the negative, and
reverse variants of the instruction.
Differential Revision: https://reviews.llvm.org/D86252
This patch implements the vec_cntm function prototypes in altivec.h in order to
utilize the vector count mask bits instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82726
This patch is the initial support for the Local Exec Thread Local
Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D83404
This patch implements the vec_expandm function prototypes in altivec.h in order
to utilize the vector expand with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82727
This patch implements the builtins for Vector Multiply Builtins (vmulxxd family of instructions), and adds the appropriate test cases for these builtins. The builtins utilize the vector multiply instructions itnroduced with ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83955
This patch adds the td instruction definitions of the xvcvspbf16 and xvcvbf16spn
instructions, along with their respective MC tests.
Differential Revision: https://reviews.llvm.org/D86794
This patch implements the builtins for Vector Load with Zero and Signed Extend Builtins (lxvr_x for b, h, w, d), and adds the appropriate test cases for these builtins. The builtins utilize the vector load instructions itnroduced with ISA 3.1.
Differential Revision: https://reviews.llvm.org/D82502#inline-797941
This patch implements the function prototypes vec_mulh and vec_dive in order to
utilize the vector multiply high (vmulh[s|u][w|d]) and vector divide extended
(vdive[s|u][w|d]) instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82609
This patch adds frontend and backend options to enable and disable
the PowerPC MMA operations added in ISA 3.1. Instructions using these
options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D81442
This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
This patch implements the vec_extractm function prototypes in altivec.h in
order to utilize the vector extract with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82675
This patch implements the builtins for the vector shifts (shl, srl, sra), and
adds the appropriate test cases for these builtins. The builtins utilize the
vector shift instructions introduced within ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83338
Zarko Todorovski