This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
* CFI instructions do not affect code generation (they are not counted as
instructions when tail duplicating or tail merging)
* Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Added CFIInstrInserter pass:
* analyzes each basic block to determine cfa offset and register are valid
at its entry and exit
* verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
* inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D42848
llvm-svn: 330706
EAX can turn out to be alive here, when shrink wrapping is done
(which is allowed when using dwarf exceptions, contrary to the
normal case with WinCFI).
This fixes PR36487.
Differential Revision: https://reviews.llvm.org/D43968
llvm-svn: 326764
The prologue-end line record must be emitted after the last
instruction that is part of the function frame setup code and before
the instruction that marks the beginning of the function body.
Patch by Carlos Alberto Enciso!
Differential Revision: https://reviews.llvm.org/D41762
llvm-svn: 325143
If we are saving/restoring k-registers, the default behavior of getMinimalRegisterClass will find the VK64 class with a spill size of 64 bits. This will cause the KMOVQ opcode to be used for save/restore. If we don't have have BWI instructions we need to constrain the class returned to give us VK16 with a 16-bit spill size. We can do this by passing the either v16i1 or v64i1 into getMinimalRegisterClass.
Also add asserts to make sure BWI is enabled anytime we use KMOVD/KMOVQ. These are what caught this bug.
Fixes PR36256
Differential Revision: https://reviews.llvm.org/D42989
llvm-svn: 324533
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
(Target)FrameLowering::determineCalleeSaves can be called multiple
times. I don't think it should have side-effects as creating stack
objects and setting global MachineFunctionInfo state as it is doing
today (in other back-ends as well).
This moves the creation of stack objects from determineCalleeSaves to
assignCalleeSavedSpillSlots.
Differential Revision: https://reviews.llvm.org/D41703
llvm-svn: 321987
This makes sure that functions that only clobber xmm registers
(on win64) also get the right cfi directives, if dwarf exceptions
are enabled.
Differential Revision: https://reviews.llvm.org/D40191
llvm-svn: 318591
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
Summary:
Calls using invoke in funclet based functions are assumed to clobber
all registers, which causes the stack adjustment using pops to consider
all registers not defined by the call to be undefined, which can
unfortunately include the base pointer, if one is needed.
To prevent this (and possibly other hazards), skip reserved registers
when looking for candidate registers.
This fixes issue #45034 in the Rust compiler.
Reviewers: mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39636
llvm-svn: 317551
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D35844
llvm-svn: 317100
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
Sink the insertion of "pop ebp" out of the frame size calculation
branches. They all check for HasFP.
Our handling of CLEANUPRET and CATCHRET was equivalent, both are
funclets and use the same frame size. We can eliminate the CLEANUPRET
case.
Hoist the hasFP(MF) query into a local bool.
Rename TargetMBB to CatchRetTarget to be more descriptive.
Eliminate the Optional<unsigned> RetOpcode local, now that it has one
use.
It's only a net savings of 10 lines, but hopefully it's *slightly* more
readable.
llvm-svn: 315000
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
llvm-svn: 306529
Commit r306010 adjusted the condition as follows:
- if (Is64Bit) {
+ if (!STI.isTargetWin32()) {
The intent was to preserve the behavior on all Windows platforms
but extend the behavior on 64-bit Windows platforms to every
other one. (Before r306010, emitStackProbeCall only ever executed
when emitting code for Windows triples.)
Unfortunately,
if (Is64Bit && STI.isOSWindows())
is not the same as
if (!STI.isTargetWin32())
because of the way isTargetWin32() is defined:
bool isTargetWin32() const {
return !In64BitMode && (isTargetCygMing() ||
isTargetKnownWindowsMSVC());
}
In practice this broke the JIT tests on 32-bit Windows, which did not
satisfy the new condition:
LLVM :: ExecutionEngine/MCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/MCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/MCJIT/test-loadstore.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-01-15-AlignmentTest.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-15-AllocaAssertion.ll
LLVM :: ExecutionEngine/OrcMCJIT/2003-08-23-RegisterAllocatePhysReg.ll
LLVM :: ExecutionEngine/OrcMCJIT/test-loadstore.ll
because %esp was not updated correctly. The failures are only visible
on a MSVC 2017 Debug build, for which we do not have bots.
llvm-svn: 306142
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The frame pointer (when used as frame pointer) is a reserved register.
We do not track liveness of reserved registers and hence do not need to
add them to the basic block livein lists.
llvm-svn: 304274
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Re-Commit of r300922 and r300923 with less aggressive assert (see
discussion at the end of https://reviews.llvm.org/D32205)
X86RegisterInfo::eliminateFrameIndex() and
X86FrameLowering::getFrameIndexReference() both had logic to compute the
base register. This consolidates the code.
Also use MachineInstr::isReturn instead of manually enumerating tail
call instructions (return instructions were not included in the previous
list because they never reference frame indexes).
Differential Revision: https://reviews.llvm.org/D32206
llvm-svn: 301211
It seems we have on situation in a sanitizer enable bootstrap build
where the return instruction has a frame index operand that does not
point to a fixed object and fails the assert added here.
This reverts commit r300923.
This reverts commit r300922.
llvm-svn: 301024
X86RegisterInfo::eliminateFrameIndex() and
X86FrameLowering::getFrameIndexReference() both had logic to compute the
base register. This consolidates the code.
Also use MachineInstr::isReturn instead of manually enumerating tail
call instructions (return instructions were not included in the previous
list because they never reference frame indexes).
Differential Revision: https://reviews.llvm.org/D32206
llvm-svn: 300923
Debug information is calculated with getFrameIndexReference() which was
missing some logic for the fixed object cases (= parameters on the stack).
rdar://24557797
Differential Revision: https://reviews.llvm.org/D32204
llvm-svn: 300781
Instructions CALLSEQ_START..CALLSEQ_END and their target dependent
counterparts keep data like frame size, stack adjustment etc. These
data are accessed by getOperand using hard coded indices. It is
error prone way. This change implements the access by special methods,
which improve readability and allow changing data representation without
massive changes of index values.
Differential Revision: https://reviews.llvm.org/D31953
llvm-svn: 300196
The x86_64 ABI requires that the stack is 16 byte aligned on function calls. Thus, the 8-byte error code, which is pushed by the CPU for certain exceptions, leads to a misaligned stack. This results in bugs such as Bug 26413, where misaligned movaps instructions are generated.
This commit fixes the misalignment by adjusting the stack pointer in these cases. The adjustment is done at the beginning of the prologue generation by subtracting another 8 bytes from the stack pointer. These additional bytes are popped again in the function epilogue.
Fixes Bug 26413
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D30049
llvm-svn: 299383
Summary:
Use this code pattern when RAX is live, instead of emitting up to 2
billion adjustments:
pushq %rax
movabsq +-$Offset+-8, %rax
addq %rsp, %rax
xchg %rax, (%rsp)
movq (%rsp), %rsp
Try to clean this code up a bit while I'm here. In particular, hoist the
logic that handles the entire adjustment with `movabsq $imm, %rax` out
of the loop.
This negates the offset in the prologue and uses ADD because X86 only
has a two operand subtract which always subtracts from the destination
register, which can no longer be RSP.
Fixes PR31962
Reviewers: majnemer, sdardis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30052
llvm-svn: 298116
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: aprantl, MatzeB, mkuper
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290955
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: mkuper, MatzeB, aprantl
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290423
Summary: This patch makes sure FirstCSPop and MBBI never point to DBG_VALUE instructions, which affected the code generated.
Reviewers: mkuper, aprantl, MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27343
llvm-svn: 288794
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
We don't need to return a MachineInstr* from these stack probe insertion
calls anyway. If we ever need to add it back, we can return an iterator
instead.
Based on a patch by David Kreitzer
This bug is a consequence of
r279314 | dexonsmith | 2016-08-19 13:40:12 -0700 (Fri, 19 Aug 2016) | 110 lines
We hit the "Assertion `!NodePtr->isKnownSentinel()' failed" assertion,
but only when inserting a stack probe call at the end of an MBB, which
isn't necessarily a common situation.
Differential Revision: https://reviews.llvm.org/D25566
llvm-svn: 284130
According to MSDN (see the PR), functions which don't touch any callee-saved
registers (including %rsp) don't need any unwind info.
This patch makes LLVM not emit unwind info for such functions, to save
binary size.
Differential Revision: https://reviews.llvm.org/D24748
llvm-svn: 282185
The x64 ABI has two major function types:
- frame functions
- leaf functions
A frame function is one which requires a stack frame. A leaf function
is one which does not. A frame function may or may not have a frame
pointer.
A leaf function does not require a stack frame and may never modify SP
except via a return (RET, tail call via JMP).
A frame function which has a frame pointer is permitted to use the LEA
instruction in the epilogue, a frame function without which doesn't
establish a frame pointer must use ADD to adjust the stack pointer epilogue.
Fun fact: Leaf functions don't require a function table entry
(associated PDATA/XDATA).
llvm-svn: 281006
On a Windows build of Chromium, r278532 (up to r278539)
X86FrameLowering::emitEpilogue because it wasn't wary enough of the
return of MachineBasicBlock::getFirstTerminator. Guard all the uses
here.
Note that r278532 *looks* like an NFC commit (just an API change), but
it removes a couple of layers of abstraction and is probably causing
optimization differences in MSVC.
llvm-svn: 278572
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
llvm-svn: 275367
Avoid implicit conversions from MachineInstrBundleIterator to
MachineInstr*, mainly by preferring MachineInstr& over MachineInstr* and
using range-based for loops.
llvm-svn: 275149
This bug (llvm.org/PR28124) was introduced by r237977, which refactored
the tail call sequence to be generated in two passes instead of one.
Unfortunately, the stack adjustment produced by the first pass was not
recognized by X86FrameLowering::mergeSPUpdates() in all cases, causing
code such as the following, which clobbers the return address, to be
generated:
popl %edi
popl %edi
pushl %eax
jmp tailcallee # TAILCALL
To fix the problem, the entire stack adjustment is performed in
X86ExpandPseudo::ExpandMI() for tail calls.
Patch by Magnus Lång <margnus1@gmail.com>
Differential Revision: http://reviews.llvm.org/D21325
llvm-svn: 275103
Summary: The code generation should be independent of the debug info.
Reviewers: zansari, davidxl, mkuper, majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D21911
llvm-svn: 274357
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
X86FrameLowering::adjustForHiPEPrologue() contains a hard-coded offset
into an Erlang Runtime System-internal data structure (the PCB). As the
layout of this data structure is prone to change, this poses problems
for maintaining compatibility.
To address this problem, the compiler can produce this information as
module-level named metadata. For example (where P_NSP_LIMIT is the
offending offset):
!hipe.literals = !{ !2, !3, !4 }
!2 = !{ !"P_NSP_LIMIT", i32 152 }
!3 = !{ !"X86_LEAF_WORDS", i32 24 }
!4 = !{ !"AMD64_LEAF_WORDS", i32 24 }
Patch by Magnus Lang
Differential Revision: http://reviews.llvm.org/D20363
llvm-svn: 273593
Summary:
... into getFrameIndexReferencePreferSP. This change folds the
fail-then-retry logic into getFrameIndexReferencePreferSP.
There is a non-functional but behaviorial change in WinException --
earlier if `getFrameIndexReferenceFromSP` failed we'd trip an assert,
but now we'll silently use the (wrong) offset from the base pointer. I
could not write the assert I'd like to write ("FrameReg ==
StackRegister", like I've done in X86FrameLowering) since there is no
easy way to get to the stack register from WinException (happy to be
proven wrong here). One solution to this is to add a `bool
OnlyStackPointer` parameter to `getFrameIndexReferenceFromSP` that
asserts if it could not satisfy its promise of returning an offset from
a stack pointer, but that seems overkill.
Reviewers: rnk
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21427
llvm-svn: 272938
... instead of explicitly conditioning on NDEBUG. Also use an easier to
read conditional expression.
(Addresses post-commit review from David Blaikie.)
llvm-svn: 272762
Summary:
... when the offset is not statically known.
Prioritize addresses relative to the stack pointer in the stackmap, but
fallback gracefully to other modes of addressing if the offset to the
stack pointer is not a known constant.
Patch by Oscar Blumberg!
Reviewers: sanjoy
Subscribers: llvm-commits, majnemer, rnk, sanjoy, thanm
Differential Revision: http://reviews.llvm.org/D21259
llvm-svn: 272756
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
the prologue.
Do not use basic blocks that have EFLAGS live-in as prologue if we need
to realign the stack. Realigning the stack uses AND instruction and this
clobbers EFLAGS.
An other alternative would have been to save and restore EFLAGS around
the stack realignment code, but this is likely inefficient.
Fixes PR27531.
llvm-svn: 267634
It is very likely that the swiftself parameter is alive throughout most
functions function so putting it into a callee save register should
avoid spills for the callers with only a minimum amount of extra spills
in the callees.
Currently the generated code is correct but unnecessarily spills and
reloads arguments passed in callee save registers, I will address this
in upcoming patches.
This also adds a missing check that for tail calls the preserved value
of the caller must be the same as the callees parameter.
Differential Revision: http://reviews.llvm.org/D18902
llvm-svn: 266252
Third time's the charm? The previous attempt (r265345) caused ASan test
failures on X86, as broken CFI caused stack traces to not work.
This version of the patch makes sure not to merge with stack adjustments
that have CFI, and to not add merged instructions' offests to the CFI
about to be generated.
This is already covered by the lit tests; I just got the expectations
wrong previously.
llvm-svn: 265623
The original commit miscompiled things on 32-bit Windows, e.g. a Clang
boostrap. It turns out that mergeSPUpdates() was a bit too generous in
what it interpreted as a stack adjustment, causing the following code:
addl $12, %esp
leal -4(%ebp), %esp
To be "optimized" into simply:
addl $8, %esp
This commit tightens up mergeSPUpdates() and includes a new test
(test14 in movtopush.ll) for this situation.
llvm-svn: 265345
This will become necessary in a subsequent change to make this method
merge adjacent stack adjustments, i.e. it might erase the previous
and/or next instruction.
It also greatly simplifies the calls to this function from Prolog-
EpilogInserter. Previously, that had a bunch of logic to resume iteration
after the call; now it just continues with the returned iterator.
Note that this changes the behaviour of PEI a little. Previously,
it attempted to re-visit the new instruction created by
eliminateCallFramePseudoInstr(). That code was added in r36625,
but I can't see any reason for it: the new instructions will obviously
not be pseudo instructions, they will not have FrameIndex operands,
and we have already accounted for the stack adjustment.
Differential Revision: http://reviews.llvm.org/D18627
llvm-svn: 265036
This is the same as r255936, with added logic for avoiding clobbering of the
red zone (PR26023).
Differential Revision: http://reviews.llvm.org/D18246
llvm-svn: 264375
When trying to replace an add to esp with pops, we need to choose dead
registers to pop into. Registers clobbered by the call and not imp-def'd
by it should be safe. Except that it's not enough to check the register
itself isn't defined, we also need to make sure no overlapping registers
are defined either.
This fixes PR26711.
Differential Revision: http://reviews.llvm.org/D18029
llvm-svn: 263139
The x86 ret instruction has a 16 bit immediate indicating how many bytes
to pop off of the stack beyond the return address.
There is a problem when extremely large structs are passed by value: we
might not be able to fit the number of bytes to pop into the return
instruction.
To fix this, expand RET_FLAG a little later and use a special sequence
to clean the stack:
pop %ecx ; return address is now in %ecx
add $n, %esp ; clean the stack
push %ecx ; bring the return address back on the stack
ret ; pop the return address and jmp to it's value
llvm-svn: 262755
Catch objects with a displacement of zero do not initialize a catch
object. The displacement is relative to %rsp at the end of the
function's prologue for x86_64 targets.
If we place an object at the top-of-stack, we will end up wit a
displacement of zero resulting in our catch object remaining
uninitialized.
Address this by creating our catch objects as fixed objects. We will
ensure that the UnwindHelp object is created after the catch objects so
that no catch object will have a displacement of zero.
Differential Revision: http://reviews.llvm.org/D17823
llvm-svn: 262546
Delete MachineInstr::getIterator(), since the term "iterator" is
overloaded when talking about MachineInstr.
- Downcast to ilist_node in iplist::getNextNode() and getPrevNode() so
that ilist_node::getIterator() is still available.
- Add it back as MachineInstr::getInstrIterator(). This matches the
naming in MachineBasicBlock.
- Add MachineInstr::getBundleIterator(). This is explicitly called
"bundle" (not matching MachineBasicBlock) to disintinguish it clearly
from ilist_node::getIterator().
- Update all calls. Some of these I switched to `auto` to remove
boiler-plate, since the new name is clear about the type.
There was one call I updated that looked fishy, but it wasn't clear what
the right answer was. This was in X86FrameLowering::inlineStackProbe(),
added in r252578 in lib/Target/X86/X86FrameLowering.cpp. I opted to
leave the behaviour unchanged, but I'll reply to the original commit on
the list in a moment.
llvm-svn: 261504
__chkstk clobbers EAX. If EAX is live across the prologue, then we have
to take extra steps to save it. We already had code to do this if EAX
was a register parameter. This change adapts it to work when shrink
wrapping is used.
llvm-svn: 261039
calling convention.
The implementation of the related callbacks in the x86 backend for such
functions are not ready to deal with a prologue block that is not the entry
block of the function.
This fixes PR26107, but the longer term solution would be to fix those callbacks.
llvm-svn: 258221
We rely on HasOpaqueSPAdjustment not changing after we've calculated
things based on it. Things like whether or not we can use 'rep;movs' to
copy bytes around, that sort of thing. If it changes, invariants in the
backend will quietly break. This situation arose when we had a call to
memcpy *and* a COPY of the FLAGS register where we would attempt to
reference local variables using %esi, a register that was clobbered by
the 'rep;movs'.
This fixes PR26124.
llvm-svn: 257730
We need a frame pointer if there is a push/pop sequence after the
prologue in order to unwind the stack. Scanning the instructions to
figure out if this happened made hasFP not constant-time which is a
violation of expectations. Let's compute this up-front and reuse that
computation when we need it.
llvm-svn: 256730
LLVM's targets need to know if stack pointer adjustments occur after the
prologue. This is needed to correctly determine if the red-zone is
appropriate to use or if a frame pointer is required.
Normally, LLVM can figure this out very precisely by reasoning about the
contents of the MachineFunction. There is an interesting corner case:
inline assembly.
The vast majority of inline assembly which will perform a push or pop is
done so to pair up with pushf or popf as appropriate. Unfortunately,
this inline assembly doesn't mark the stack pointer as clobbered
because, well, it isn't. The stack pointer is decremented and then
immediately incremented. Because of this, LLVM was changed in r256456
to conservatively assume that inline assembly contain a sequence of
stack operations. This is unfortunate because the vast majority of
inline assembly will not end up manipulating the stack pointer in any
way at all.
Instead, let's provide a more principled solution: an intrinsic.
FWIW, other compilers (MSVC and GCC among them) also provide this
functionality as an intrinsic.
llvm-svn: 256685
A frame pointer must be used if stack pointer is modified after the
prologue. LLVM will emit pushf/popf if we need to save/restore the
FLAGS register, requiring us to have a frame pointer for the function.
There is a small twist: this sequence might exist in user code via
inline-assembly. For now, conservatively assume that such functions
require a frame pointer. For real world justification, please see
clang's implementation of __readeflags.
This fixes PR25945.
llvm-svn: 256456
It adjusts from RSP-after-prologue to RBP, which is what SEH filters
need to do before they can use llvm.localrecover.
Fixes SEH filter captures, which were broken in r250088.
Issue reported by Alex Crichton.
llvm-svn: 255707
without a frame pointer when unwind may happen.
This is a workaround for a bug in the way we emit the CFI directives for
frameless unwind information. See PR25614.
llvm-svn: 255175
This removes the code path that generate "synchronous" (only correct at call site) CFA.
We will probably want to re-introduce it once we are capable of emitting different
.eh_frame and .debug_frame sections.
Differential Revision: http://reviews.llvm.org/D14948
llvm-svn: 254874
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes.
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights.
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This the second patch above. In this patch SelectionDAG starts to use
probability-based interfaces in MBB to add successors but other MC passes are
still using weight-based interfaces. Therefore, we need to maintain correct
weight list in MBB even when probability-based interfaces are used. This is
done by updating weight list in probability-based interfaces by treating the
numerator of probabilities as weights. This change affects many test cases
that check successor weight values. I will update those test cases once this
patch looks good to you.
Differential revision: http://reviews.llvm.org/D14361
llvm-svn: 253965
Caller saved regs differ between SysV and Win64. Use the tail call available set to scavenge from.
Refactor register info to create new helper to get at tail call GPRs. Added a new test case for windows. Fixed up a number of X64 tests since now RCX is preferred over RDX on SysV.
Differential Revision: http://reviews.llvm.org/D14878
llvm-svn: 253927
Summary:
Now that there is a one-to-one mapping from MachineFunction to
WinEHFuncInfo, we don't need to use a DenseMap to select the right
WinEHFuncInfo for the current funclet.
The main challenge here is that X86WinEHStatePass is an IR pass that
doesn't have access to the MachineFunction. I gave it its own
WinEHFuncInfo object that it uses to calculate state numbers, which it
then throws away. As long as nobody creates or removes EH pads between
this pass and SDAG construction, we will get the same state numbers.
The other thing X86WinEHStatePass does is to mark the EH registration
node. Instead of communicating which alloca was the registration through
WinEHFuncInfo, I added the llvm.x86.seh.ehregnode intrinsic. This
intrinsic generates no code and simply marks the alloca in use.
Reviewers: JCTremoulet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14668
llvm-svn: 253378
On top of that, don't bother allocating and initializing UnwindHelp if
we don't have any funclets. Currently we always use RBP as our frame
pointer when funclets are present, so this change makes it impossible to
come here without any fixed stack objects.
Fixes PR25533.
llvm-svn: 253245
The C++ EH personality automatically restores ESP from the C++ EH
registration node after a catchret. I mistakenly thought it was like
SEH, which does not restore ESP.
It makes sense for C++ EH to differ from SEH here because SEH does not
use funclets for catches, and does not allow catching inside of finally.
C++ EH may need to unwind through multiple catch funclets and eventually
catchret to some outer funclet. Therefore, the runtime has to keep track
of which ESP to use with catchret, rather than having the compiler
reload it manually.
llvm-svn: 253084
Summary:
The value that the CoreCLR personality passes to a funclet for the
establisher frame may be the root function's frame or may be the parent
funclet's (mostly empty) frame in the case of nested funclets. Each
funclet stores a pointer to the root frame in its own (mostly empty)
frame, as does the root function itself. All frames allocate this slot at
the same offset, measured from the post-prolog stack pointer, so that the
same sequence can accept any ancestor as an establisher frame parameter
value, and so that a single offset can be reported to the GC, which also
looks at this slot.
This change allocate the slot when processing function entry, and records
its frame index on the WinEHFuncInfo object, then inserts the code to
set/copy it during prolog emission.
Reviewers: majnemer, AndyAyers, pgavlin, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14614
llvm-svn: 252983
For CoreCLR on Windows, stack probes must be emitted as inline sequences that probe successive stack pages
between the current stack limit and the desired new stack pointer location. This implements support for
the inline expansion on x64.
For in-body alloca probes, expansion is done during instruction lowering. For prolog probes, a stub call
is initially emitted during prolog creation, and expanded after epilog generation, to avoid complications
that arise when introducing new machine basic blocks during prolog and epilog creation.
Added a new test case, modified an existing one to exclude non-x64 coreclr (for now).
Add test case
Fix tests
llvm-svn: 252578
For some reason we'd never run MachineVerifier on WinEH code, and you
explicitly have to ask for it with llc. I added it to a few test cases
to get some coverage.
Fixes PR25461.
llvm-svn: 252512
This adds the EH_RESTORE x86 pseudo instr, which is responsible for
restoring the stack pointers: EBP and ESP, and ESI if stack realignment
is involved. We only need this on 32-bit x86, because on x64 the runtime
restores CSRs for us.
Previously we had to keep the CATCHRET instruction around during SEH so
that we could convince X86FrameLowering to restore our frame pointers.
Now we can split these instructions earlier.
This was confusing, because we had a return instruction which wasn't
really a return and was ultimately going to be removed by
X86FrameLowering. This change also simplifies X86FrameLowering, which
really shouldn't be building new MBBs.
No observable functional change currently, but with the new register
mask stuff in D14407, CATCHRET will become a register allocator barrier,
and our existing tests rely on us having reasonable register allocation
around SEH.
llvm-svn: 252266
We already had a test for this for 32-bit SEH catchpads, but those don't
actually create funclets. We had a bug that only appeared in funclet
prologues, where we would establish EBP and ESI as our FP and BP, and
then downstream prologue code would overwrite them.
While I was at it, I fixed Win64+funclets+stackrealign. This issue
doesn't come up as often there due to the ABI requring 16 byte stack
alignment, but now we can rest easy that AVX and WinEH will work well
together =P.
llvm-svn: 252210
Summary:
This review is related to another review request http://reviews.llvm.org/D11268, does the same and merely fixes a couple of issues with it.
D11268 is quite old and has merge conflicts against the current trunk.
This request
- rebases D11268 onto the new trunk;
- resolves the merge conflicts;
- fixes the prologue_end tests, which do not pass due to the subprogram definitions not marked as distinct.
Reviewers: echristo, rengolin, kubabrecka
Subscribers: aemerson, rengolin, jyknight, dsanders, llvm-commits, asl
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252177
Summary:
The CLR's personality routine passes the pointer to the establisher frame
in RCX, not RDX.
Reviewers: pgavlin, majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14343
llvm-svn: 252135
Win64 has some strict requirements for the epilogue. As a result, we disable
shrink-wrapping for Win64 unless the block that gets the epilogue is already an
exit block.
Fixes PR24193.
llvm-svn: 252088
When push instructions are being used to pass function arguments on
the stack, and either EH or debugging are enabled, we need to generate
.cfi_adjust_cfa_offset directives appropriately. For (synch) EH, it is
enough for the CFA offset to be correct at every call site, while
for debugging we want to be correct after every push.
Darwin does not support this well, so don't use pushes whenever it
would be required.
Differential Revision: http://reviews.llvm.org/D13767
llvm-svn: 251904
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
In particular, passing non-trivially copyable objects by value on win32
uses a dynamic alloca (inalloca). We would clobber ESP in the epilogue
and end up returning to outer space.
llvm-svn: 249637
When outgoing function arguments are passed using push instructions, and EH
is enabled, we may need to indicate to the stack unwinder that the stack
pointer was adjusted before the call.
This should fix the exception handling issues in PR24792.
Differential Revision: http://reviews.llvm.org/D13132
llvm-svn: 249522
The CATCHRET operand did not match the MachineFunction's CFG. This
mismatch happened because FrameLowering created a new MachineBasicBlock
and updated the CFG but forgot to update the CATCHRET operand.
Let's make sure this doesn't happen again by strengthing the funclet
membership analysis: it can now reason about the membership of all basic
blocks, not just those inside of funclets.
llvm-svn: 249344
We emit denormalized tables, where every range of invokes in the same
state gets a complete list of EH action entries. This is significantly
simpler than trying to infer the correct nested scoping structure from
the MI. Fortunately, for SEH, the nesting structure is really just a
size optimization.
With this, some basic __try / __except examples work.
llvm-svn: 249078
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
llvm-svn: 249052
The x64 ABI requires that epilogues do not contain code other than stack
adjustments and some limited control flow. However, we'd insert code to
initialize the return address after stack adjustments. Instead, insert
EAX/RAX with the current value before we create the stack adjustments in
the epilogue.
llvm-svn: 248839
Summary:
Funclets have been turned into functions by the time they hit the object
file. Make sure that they have decent names for the symbol table and
CFI directives explaining how to reason about their prologues.
Differential Revision: http://reviews.llvm.org/D13261
llvm-svn: 248824
This makes catchret look more like a branch, and less like a weird use
of BlockAddress. It also lets us get away from
llvm.x86.seh.restoreframe, which relies on the old parentfpoffset label
arithmetic.
llvm-svn: 247936
Clang now passes the adjectives as an argument to catchpad.
Getting the CatchObj working is simply a matter of threading another
static alloca through codegen, first as an alloca, then as a frame
index, and finally as a frame offset.
llvm-svn: 247844
When trying emit a stack adjustments using pops, frame lowering selects an
arbitrary free GPR. It should always select one from an appropriate class...
This fixes PR24649.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12609
llvm-svn: 247785
This is the mirror image of r242395.
When X86FrameLowering::emitEpilogue() looks for where to insert the %esp addition that
deallocates stack space used for local allocations, it assumes that any sequence of pop
instructions from function exit backwards consists purely of restoring callee-save registers.
This may be false, since from some point backward, the pops may be clean-up of stack space
allocated for arguments to a call.
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D12688
llvm-svn: 247784
realignment should be forced.
With this commit, we can now force stack realignment when doing LTO and
do so on a per-function basis. Also, add a new cl::opt option
"stackrealign" to CommandFlags.h which is used to force stack
realignment via llc's command line.
Out-of-tree projects currently using -force-align-stack to force stack
realignment should make changes to attach the attribute to the functions
in the IR.
Differential Revision: http://reviews.llvm.org/D11814
llvm-svn: 247450
The Win32 EH runtime caller does not preserve EBP, even though it does
preserve the CSRs (EBX, ESI, EDI) for us. The result was that each
finally funclet call would leave the frame pointer off by 12 bytes.
llvm-svn: 247348
All of the complexity is in cleanupret, and it mostly follows the same
codepaths as catchret, except it doesn't take a return value in RAX.
This small example now compiles and executes successfully on win32:
extern "C" int printf(const char *, ...) noexcept;
struct Dtor {
~Dtor() { printf("~Dtor\n"); }
};
void has_cleanup() {
Dtor o;
throw 42;
}
int main() {
try {
has_cleanup();
} catch (int) {
printf("caught it\n");
}
}
Don't try to put the cleanup in the same function as the catch, or Bad
Things will happen.
llvm-svn: 247219
With subregister liveness enabled we can detect the case where only
parts of a register are live in, this is expressed as a 32bit lanemask.
The current code only keeps registers in the live-in list and therefore
enumerated all subregisters affected by the lanemask. This turned out to
be too conservative as the subregister may also cover additional parts
of the lanemask which are not live. Expressing a given lanemask by
enumerating a minimum set of subregisters is computationally expensive
so the best solution is to simply change the live-in list to store the
lanemasks as well. This will reduce memory usage for targets using
subregister liveness and slightly increase it for other targets
Differential Revision: http://reviews.llvm.org/D12442
llvm-svn: 247171
Summary:
32-bit funclets have short prologues that allocate enough stack for the
largest call in the whole function. The runtime saves CSRs for the
funclet. It doesn't restore CSRs after we finally transfer control back
to the parent funciton via a CATCHRET, but that's a separate issue.
32-bit funclets also have to adjust the incoming EBP value, which is
what llvm.x86.seh.recoverframe does in the old model.
64-bit funclets need to spill CSRs as normal. For simplicity, this just
spills the same set of CSRs as the parent function, rather than trying
to compute different CSR sets for the parent function and each funclet.
64-bit funclets also allocate enough stack space for the largest
outgoing call frame, like 32-bit.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12546
llvm-svn: 247092
Petar Jovanovic