This is directly analogous to the existing no_caller_saved_registers, but with the opposite intention. A function or call so marked shifts the responsibility of spilling the usual CSRs to it's caller.
An indirect call site and callee which don't agree on the attribute is ill defined.
The motivation for this change is that being able to prune callee saves (without modifying other details of the calling convention) is sometimes useful when generating stubs and adapters. There's no intention to expose this as a source language feature; this is expected to be used by frontends to implement adapters where warranted.
Some specific examples of use cases:
* GC compatible compiled code wants to call an externally defined library function without needing to track pointer values through CSRs.
* debug enabled code wants to call precompiled library which doesn't provide enough information to track CSRs while preserving debug quality in caller.
* adapter stub entering hand written assembler which doesn't follow normal calling conventions.
We can only legally extract from the lowest 128-bit subvector, so extract the correct subvector to allow us to handle 256/512-bit vector element extracts.
If the shuffle mask can't be widened to match the original extracted element width, see if the upper bits are zeroable - which allows us to extract+zero-extend the smaller extraction.
Ensure we check the valuetypes of all the HOP(SHUFFLE(X,Y),SHUFFLE(X,Y)) shuffle input ops - there was a copy+paste typo (noticed by MSVC analyzer) that meant we were checking the same input from one of the shuffles twice.
I haven't been able to create a test case for this yet - I don't think its currently possible to create a target/faux binary shuffle that scales to a 2x128 shuffle mask from two different value types.
Unlike VPERMILPS, VPERMILPD can have non-repeating masks in each 128-bit subvector, we weren't accounting for this when folding vperm2f128(vpermilpd(x,c),vpermilpd(y,c)) -> vpermilpd(vperm2f128(x,y),c).
I'm intending to add support for this but wanted to get a minimal fix in first for merging into 12.xx.
Fixes PR48908
We're relying on the source inputs for shuffle combining having already been widened to the root size (otherwise the offset logic falls over) - we're going to be supporting different sized shuffle inputs soon, so we need to explicitly make the minimum widened width the original root size.
We allow insert_subvector lowering of all legal types, so don't always cast to the vXi64/vXf64 shuffle types - this is only necessary for X86ISD::SHUF128/X86ISD::VPERM2X128 patterns later.
Simplify vperm2x128(concat(X,Y),concat(Z,W)) folding.
Use collectConcatOps / ISD::INSERT_SUBVECTOR to find the source subvectors instead of hardcoded immediate matching.
combineX86ShufflesConstants/canonicalizeShuffleMaskWithHorizOp can both handle/earlyout shuffles with inputs of different widths, so delay widening as late as possible to make it easier to match constant folds etc.
The plan is to eventually move the widening inside combineX86ShuffleChain so that we don't create any new nodes unless we successfully combine the shuffles.
rGbe69e66b1cd8 added the fold, but DAGCombiner.visitVECTOR_SHUFFLE doesn't merge shuffles if the inner shuffle is a splat, so we need to bail.
The non-fast-horiz-ops paths see some minor regressions, we might be able to improve on this after lowering to target shuffles.
Fix PR48823
We already have an experimental option to tune loop alignment. Its impact
is very wide (and there is a suspicion that it's not always profitable). We want
to have something more narrow to play with. This patch adds similar option that
overrides preferred alignment for innermost loops. This is for experimental
purposes, default values do not change the existing behavior.
Differential Revision: https://reviews.llvm.org/D94895
Reviewed By: pengfei
We already handle "vperm2x128 (ins ?, X, C1), (ins ?, X, C1), 0x31" for shuffling of the upper subvectors, but we weren't dealing with the case when we were splatting the upper subvector from a single source.
As discussed on D56387, if we're shifting to extract the upper/lower half of a vXi64 vector then we're actually better off performing this at the subvector level as its very likely to fold into something.
combineConcatVectorOps can perform this in reverse if necessary.
If a srl doesn't introduce any sign bits into the truncated result, then replace with a sra to let us use a PACKSS truncation - fixes a regression noticed in D56387 on pre-SSE41 targets that don't have PACKUSDW.
Specify LHS/RHS operands in matchShuffleWithUNPCK's calls to isTargetShuffleEquivalent, and handle VBROADCAST/VBROADCAST_LOAD matching in IsElementEquivalent
If this will help us fold shuffles together, then push the shuffle through the merged binops.
Ideally this would be performed in DAGCombiner::visitVECTOR_SHUFFLE but getting an efficient+legal merged shuffle can be tricky - on SSE we can be confident that for 32/64-bit elements vectors shuffles should easily fold.
See if we can remove the shuffle by resorting a HOP chain so that the HOP args are pre-shuffled.
This initial version just handles (the most common) v4i32/v4f32 hadd/hsub reduction patterns - future work can extend this to v8i16 types plus PACK chains (2f64 HADD/HSUB should already be handled in the half-lane combine code later on).
canonicalizeShuffleMaskWithHorizOp currently only supports shuffles with 1 or 2 sources, but PR41813 will require us to support higher numbers of sources.
This patch just generalizes the initial setup stages to ensure all src ops are the same type and opcode and then will continue to early out if we have more than 2 sources.
rG73a44f437bf1 result in 256-bit packss/packus ops with additional shuffles that shuffle combining can sometimes try to convert back into a truncation.
Adapted from D54696 by @nikic.
This patch improves lowering of saturating float to
int conversions, FP_TO_[SU]INT_SAT, for X86.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86079
We can't easily treat ASHR a faux shuffle, but if it was just feeding a PACKSS then it was likely being used as sign-extension for a truncation, so just peek through and adjust the mask accordingly.
v16i32 -> v16i16/v8i16 truncation is now good enough using PACKSS/PACKUS + shuffle combining that its no longer necessary to early-out on pre-AVX512BW targets.
This was noticed while looking at completing PR40111 and moving combineSubToSubus to DAGCombine entirely.
SSE2 truncation codegen has improved over the past few years (mainly due to better shuffle lowering/combining and computeKnownBits) - its no longer necessary to early-out from v8i32/v8i64 truncations.
This was noticed while looking at completing PR40111 and moving combineSubToSubus to DAGCombine entirely.
If vpermf128/vpermi128 is acting on 2 similar 'inlane' ops, then try to perform the vpermf128 first which will allow us to merge the ops.
This will help us fix one of the regressions in D56387
This reapplies commit rG80dee7965dffdfb866afa9d74f3a4a97453708b2.
[X86][SSE] Fold unpack(hop(),hop()) -> permute(hop())
UNPCKL/UNPCKH only uses one op from each hop, so we can merge the hops and then permute the result.
REAPPLIED with a fix for unary unpacks of HOP.
AVX512 has fast truncation ops, but if the truncation source is a concatenation of subvectors then its likely that we can use PACK more efficiently.
This is only guaranteed to work for truncations to 128/256-bit vectors as the PACK works across 128-bit sub-lanes, for now I've just disabled 512-bit truncation cases but we need to get them working eventually for D61129.
When building abseil-cpp `bin/absl_hash_test` with Clang in -fno-pic
mode, an instruction like `movl $foo-2147483648, $eax` may be produced
(subtracting a number from the address of a static variable). If foo's
address is smaller than 2147483648, GNU ld/gold/LLD will error because
R_X86_64_32 cannot represent a negative value.
```
using absl::Hash;
struct NoOp {
template < typename HashCode >
friend HashCode AbslHashValue(HashCode , NoOp );
};
template <typename> class HashIntTest : public testing::Test {};
TYPED_TEST_SUITE_P(HashIntTest);
TYPED_TEST_P(HashIntTest, BasicUsage) {
if (std::numeric_limits< TypeParam >::min )
EXPECT_NE(Hash< NoOp >()({}),
Hash< TypeParam >()(std::numeric_limits< TypeParam >::min()));
}
REGISTER_TYPED_TEST_CASE_P(HashIntTest, BasicUsage);
using IntTypes = testing::Types< int32_t>;
INSTANTIATE_TYPED_TEST_CASE_P(My, HashIntTest, IntTypes);
ld: error: hash_test.cc:(function (anonymous namespace)::gtest_suite_HashIntTest_::BasicUsage<int>::TestBody(): .text+0x4E472): relocation R_X86_64_32 out of range: 18446744071564237392 is not in [0, 4294967295]; references absl::hash_internal::HashState::kSeed
```
Actually any negative offset is not allowed because the symbol address
can be zero (e.g. set by `-Wl,--defsym=foo=0`). So disallow such folding.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D93931
The x86_amx is used for AMX intrisics. <256 x i32> is bitcast to x86_amx when
it is used by AMX intrinsics, and x86_amx is bitcast to <256 x i32> when it
is used by load/store instruction. So amx intrinsics only operate on type x86_amx.
It can help to separate amx intrinsics from llvm IR instructions (+-*/).
Thank Craig for the idea. This patch depend on https://reviews.llvm.org/D87981.
Differential Revision: https://reviews.llvm.org/D91927
Followup to D92645 - remove the remaining places where we create X86ISD::SUBV_BROADCAST, and fold splatted vector loads to X86ISD::SUBV_BROADCAST_LOAD instead.
Remove all the X86SubVBroadcast isel patterns, including all the fallbacks for if memory folding failed.
This was needed in an earlier version of D92645, but isn't now - and I've just noticed that it was potentially flawed depending on the relevant widths of the broadcasted and extracted subvectors.
Subvector broadcasts are only load instructions, yet X86ISD::SUBV_BROADCAST treats them more generally, requiring a lot of fallback tablegen patterns.
This initial patch replaces constant vector lowering inside lowerBuildVectorAsBroadcast with direct X86ISD::SUBV_BROADCAST_LOAD loads which helps us merge a number of equivalent loads/broadcasts.
As well as general plumbing/analysis additions for SUBV_BROADCAST_LOAD, I needed to wrap SelectionDAG::makeEquivalentMemoryOrdering so it can handle result chains from non generic LoadSDNode nodes.
Later patches will continue to replace X86ISD::SUBV_BROADCAST usage.
Differential Revision: https://reviews.llvm.org/D92645
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
Since these are all working on reduction patterns, actually use that term in the function name to make them easier to search for.
At some point we're likely to start working with the ISD::VECREDUCE_* opcodes directly in the x86 backend, but that is still some way off.
As discussed on D92645, we don't do a good job of recognising when we don't require the full width of a ymm/zmm build vector because the upper elements are undef/zero.
This commit allows us to make use of implicit zeroing of upper elements with AVX instructions, which we emulate in DAG with a INSERT_SUBVECTOR into the bottom of a undef/zero vector of the original type.
This exposed a limitation in getTargetConstantBitsFromNode which didn't extract bits from INSERT_SUBVECTORs of different element widths which I've included as well to prevent a couple of regressions.
The X86-64 ABI defines va_list as
typedef struct {
unsigned int gp_offset;
unsigned int fp_offset;
void *overflow_arg_area;
void *reg_save_area;
} va_list[1];
This means the size, alignment, and reg_save_area offset will depend on
whether we are in LP64 or in ILP32 mode, so this commit adds the checks.
Additionally, the VAARG_64 pseudo-instruction assumed 64-bit pointers, so
this commit adds a VAARG_X32 pseudo-instruction that behaves just like
VAARG_64, except for assuming 32-bit pointers.
Some of these changes were originally done by
Michael Liao <michael.hliao@gmail.com>.
Fixes https://bugs.llvm.org/show_bug.cgi?id=48428.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D93160
If a faux shuffle uses smaller shuffle inputs, try to recursively combine with those inputs directly instead of widening them immediately. Then widen all smaller inputs at the bottom of the recursion.
This will still mean we're generating nodes on the fly (PR45974) even if we don't combine to a new shuffle but it does help AVX2+ targets combine across xmm/ymm/zmm types, mainly as variable shuffles.
Default expansion leads to repeated extensions/truncations to/from vXi16 which shuffle combining and demanded elts can't completely unravel.
Better just to promote (any_extend) the input and perform a vXi16 reduction.
We'll be able to remove a lot of this if we ever get decent legalization support for reduction intrinsics in SelectionDAG.
This patch implements amx programming model that discussed in llvm-dev
(http://lists.llvm.org/pipermail/llvm-dev/2020-August/144302.html).
Thank Hal for the good suggestion in the RA. The fast RA is not in the patch yet.
This patch implemeted 7 components.
1. The c interface to end user.
2. The AMX intrinsics in LLVM IR.
3. Transform load/store <256 x i32> to AMX intrinsics or split the
type into two <128 x i32>.
4. The Lowering from AMX intrinsics to AMX pseudo instruction.
5. Insert psuedo ldtilecfg and build the def-use between ldtilecfg to amx
intruction.
6. The register allocation for tile register.
7. Morph AMX pseudo instruction to AMX real instruction.
Change-Id: I935e1080916ffcb72af54c2c83faa8b2e97d5cb0
Differential Revision: https://reviews.llvm.org/D87981
Rather than creating a series of associated calls and ensuring that
everything is lined up, use a table driven approach that ensures that
they two always stay in sync.
Adds the ExtensionType flag, which reflects the LoadExtType of a MaskedGatherSDNode.
Also updated SelectionDAGDumper::print_details so that details of the gather
load (is signed, is scaled & extension type) are printed.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91084
D92346 added TLS_(base_)addrX32 to handle TLS in x32 mode, but missed the
different TLS models. This diff fixes the logic for the local dynamic model
where `RAX` was used when `EAX` should be, and extends the tests to cover
all four TLS models.
Fixes https://bugs.llvm.org/show_bug.cgi?id=26472.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92737
Sometimes people get minimal crash reports after a UBSAN incident. This change
tags each trap with an integer representing the kind of failure encountered,
which can aid in tracking down the root cause of the problem.
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
No register can be allocated for indirect call when it use regcall calling
convention and passed 5/5+ args.
For example:
call vreg (ag1, ag2, ag3, ag4, ag5, ...) --> 5 regs (EAX, ECX, EDX, ESI, EDI)
used for pass args, 1 reg (EBX )used for hold GOT point, so no regs can be
allocated to vreg.
The Intel386 architecture provides 8 general purpose 32-bit registers. RA
mostly use 6 of them (EAX, EBX, ECX, EDX, ESI, EDI). 5 of this regs can be
used to pass function arguments (EAX, ECX, EDX, ESI, EDI).
EBX used to hold the GOT pointer when making function calls via the PLT.
ESP and EBP usually be "reserved" in register allocation.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D91020
LLVM has TLS_(base_)addr32 for 32-bit TLS addresses in 32-bit mode, and
TLS_(base_)addr64 for 64-bit TLS addresses in 64-bit mode. x32 mode wants 32-bit
TLS addresses in 64-bit mode, which were not yet handled. This adds
TLS_(base_)addrX32 as copies of TLS_(base_)addr64, except that they use
tls32(base)addr rather than tls64(base)addr, and then restricts
TLS_(base_)addr64 to 64-bit LP64 mode, TLS_(base_)addrX32 to 64-bit ILP32 mode.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92346
Its unlikely an undef element in a zero vector will be any use, and SimplifyDemandedVectorElts now calls combineX86ShufflesRecursively so its unlikely we actually have a dependency on these specific elements.
Move the X86 VSELECT->UADDSAT fold to DAGCombiner - there's nothing target specific about these folds.
The SSE42 test diffs are relatively benign - its avoiding an extra constant load in exchange for an extra xor operation - there are extra register moves, which is annoying as all those operations should commute them away.
Differential Revision: https://reviews.llvm.org/D91876
For LP64 mode, this has no effect as pointers are already 64 bits.
For ILP32 mode (x32), this extension is specified by the ABI.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D91338
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
Differential Revision: https://reviews.llvm.org/D92183
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
This is part of the discussion on D91876 about trying to reduce custom lowering of MIN/MAX ops on older SSE targets - if we can improve generic vector expansion we should be able to relax the limitations in SelectionDAGBuilder when it will let MIN/MAX ops be generated, and avoid having to flag so many ops as 'custom'.
Use the OR(CMP,ADD) / AND(CMP,SUB) patterns like we do on SSE targets.
Enable custom lowering for v8i32/v4i64 and generalize the 128-bit lowering code for any vector size - this also lets us use the slightly cheaper codegen for icmp_ugt instead of umin/umax.
The default version only works if the returned node has a single
result. The X86 and PowerPC versions support multiple results
and allow a single result to be returned from a node with
multiple outputs. And allow a single result that is not result 0
of the node.
Also replace the Mips version since the new version should work
for it. The original version handled multiple results, but only
if the new node and original node had the same number of results.
Differential Revision: https://reviews.llvm.org/D91846
Use the OR(CMP,ADD) / AND(CMP,SUB) patterns like we do on pre-SSE4 targets.
We're still using X86ISD::BLENDV on some AVX targets as we don't do custom lowering for >= 256-bit vectors.
Really this (and combineVSelectWithAllOnesOrZeros) needs moving to DAGCombiner, but pre-SSE42 we see the vXi64 comparison type as a 2 x 32-bits result so we can't just rely on ComputeNumSignBits to give us the 'all bits' result we need.
D57663 allowed us to reuse broadcasts of the same scalar value by extracting low subvectors from the widest type.
Unfortunately we weren't ensuring the broadcasts were from the same SDValue, just the same SDNode - which failed on multiple-value nodes like ISD::SDIVREM
FYI: I intend to request this be merged into the 11.x release branch.
Differential Revision: https://reviews.llvm.org/D91709
We can use GF2P8AFFINEQB to reverse bits in a byte. Shuffles are needed to reverse the bytes in elements larger than i8. LegalizeVectorOps takes care of inserting the shuffle for the larger element size.
We already have Custom lowering for v16i8 with SSSE3, v32i8 with AVX, and v64i8 with AVX512BW.
I think we might be able to use this for scalars too by moving into a vector and back. But I'll save that for a follow up as its a little more involved.
Reviewed By: RKSimon, pengfei
Differential Revision: https://reviews.llvm.org/D91515
We unconditionally marked i64 as Custom, but did not install a
handler in ReplaceNodeResults when i64 isn't legal type. This
leads to ReplaceNodeResults asserting.
We have two options to fix this. Only mark i64 as Custom on
64-bit targets and let it expand to two i32 bitreverses which
each need a VPPERM. Or the other option is to add the Custom
handling to ReplaceNodeResults. This is what I went with.
This was a mistake introduced in D91294. I'm not sure how to
exercise this with the existing code, but I hit it while trying
some follow up experiments.
We can't store garbage in the unused bits. It possible that something like zextload from i1/i2/i4 is created to read the memory. Those zextloads would be legalized assuming the extra bits are 0.
I'm not sure that the code in lowerStore is executed for the v1i1/v2i1/v4i1 case. It looks like the DAG combine in combineStore may have converted them to v8i1 first. And I think we're missing some cases to avoid going to the stack in the first place. But I don't have time to investigate those things at the moment so I wanted to focus on the correctness issue.
Should fix PR48147.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D91294
We have a frequent pattern where we're merging two KnownBits to get the common/shared bits, and I just fell for the gotcha where I tried to use the & operator to merge them........
This patch adds the IsTruncatingStore flag to MaskedScatterSDNode, set by getMaskedScatter().
Updated SelectionDAGDumper::print_details for MaskedScatterSDNode to print
the details of masked scatters (is truncating, signed or scaled).
This is the first in a series of patches which adds support for scalable masked scatters
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90939
Invert the select condition when masking in the sign bit of a fptoui operation. Also, rather than lowering the sign mask to select/xor and expecting the select to get cleaned up later, directly lower to shift/xor.
Patch by Layton Kifer!
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D90658
Replace the X86 specific isSplatZeroExtended helper with a generic BuildVectorSDNode method.
I've just used this to simplify the X86ISD::BROADCASTM lowering so far (and remove isSplatZeroExtended), but we should be able to use this in more places to lower to complex broadcast patterns.
Differential Revision: https://reviews.llvm.org/D87930
Add the MVT equivalent handling for EVT changeTypeToInteger/changeVectorElementType/changeVectorElementTypeToInteger.
All the SimpleVT code already exists inside the EVT equivalents, but by splitting this out we can use these directly inside MVT types without converting to/from EVT.
Some of our conversion algorithms produce -0.0 when converting unsigned i64 to double when the rounding mode is round toward negative. This switches them to other algorithms that don't have this problem. Since it is undefined behavior to change rounding mode with the non-strict nodes, this patch only changes the behavior for strict nodes.
There are still problems with unsigned i32 conversions too which I'll try to fix in another patch.
Fixes part of PR47393
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87115
extract_vector_elt will turn type vxi1 into i8, which triggers the assertion fail.
Since we don't really handle vxi1 cases in below code, we can just return from here.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D89096
In most of lib/Target we know that we are not dealing with scalable
types so it's perfectly fine to replace TypeSize comparison operators
with their fixed width equivalents, making use of getFixedSize()
and so on.
Differential Revision: https://reviews.llvm.org/D89101
This passes existing X86 test but I'm not sure if it handles all type
legalization cases it needs to.
Alternative to D89200
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89222
This is my first LLVM patch, so please tell me if there are any process issues.
The main observation for this patch is that we can lower UMIN/UMAX with v8i16 by using unsigned saturated subtractions in a clever way. Previously this operation was lowered by turning the signbit of both inputs and the output which turns the unsigned minimum/maximum into a signed one.
We could use this trick in reverse for lowering SMIN/SMAX with v16i8 instead. In terms of latency/throughput this is the needs one large move instruction. It's just that the sign bit turning has an increased chance of being optimized further. This is particularly apparent in the "reduce" test cases. However due to the slight regression in the single use case, this patch no longer proposes this.
Unfortunately this argument also applies in reverse to the new lowering of UMIN/UMAX with v8i16 which regresses the "horizontal-reduce-umax", "horizontal-reduce-umin", "vector-reduce-umin" and "vector-reduce-umax" test cases a bit with this patch. Maybe some extra casework would be possible to avoid this. However independent of that I believe that the benefits in the common case of just 1 to 3 chained min/max instructions outweighs the downsides in that specific case.
Patch By: @TomHender (Tom Hender) ActuallyaDeviloper
Differential Revision: https://reviews.llvm.org/D87236
The bextri intrinsic has a ImmArg attribute which will be converted
in SelectionDAG using TargetConstant. We previously converted this
to a plain Constant to allow X86ISD::BEXTR to call SimplifyDemandedBits
on it.
But while trying to decide if D89178 was safe, I realized that
this conversion of TargetConstant to Constant would be one case
where that would break.
So this patch adds a new opcode specifically for the immediate case.
And then teaches computeKnownBits and SimplifyDemandedBits to also
handle it, but not try to SimplifyDemandedBits on it. To make up
for that, I immediately masked the constant to 16 bits when
converting from the intrinsic node to the X86ISD node.
The notrack prefix is a relaxation of CET policies which makes it possible to indirectly call targets which do not have an ENDBR instruction in the landing address. To emit a call with this prefix, the special attribute "nocf_check" is used. When used as a function attribute, a CallInst targeting the respective function will return true for the method "doesNoCfCheck()", no matter if it is a direct call (and such should remain like this, as the information that the to-be-called function won't perform control-flow checks is useful in other contexts). Yet, when emitting an X86ISD::NT_CALL, the respective CallInst should be verified for its indirection, allowing that the prefixed calls are only emitted in the right situations.
Update the respective testing unit to also verify for direct calls to functions with ''nocf_check'' attributes.
The bug can also be reproduced through compiling the following C code using the -fcf-protection=full flag.
int __attribute__((nocf_check)) foo(int a) {};
int main() {
foo(42);
}
Differential Revision: https://reviews.llvm.org/D87320
I suspect getAddressFromInstr and addFullAddress are not handling
all addresses cases properly based on a report from MaskRay.
So just copy the operands directly. This should be more efficient
anyway.
We need to use LCMPXCHG16B_SAVE_RBX if RBX/EBX is being used as
the frame pointer. We previously checked for this during type
legalization, but that's too early to know for sure if the base
pointer is needed.
This patch adds a new pseudo instruction to emit from isel that
uses a virtual register for the RBX input. Then we use the custom
inserter hook to emit LCMPXCHG16B if RBX isn't needed as a base
pointer or LCMPXCHG16B_SAVE_RBX if it is.
Fixes PR42064.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D88808
As part of PR45974, we're getting closer to not creating 'padded' vectors on-the-fly in combineX86ShufflesRecursively, and only pad the source inputs if we have a definite match inside combineX86ShuffleChain.
At the moment combineX86ShuffleChain just has to bitcast an input to the correct shuffle type, but eventually we'll need to pad them as well. So, move the bitcast into a 'CanonicalizeShuffleInput helper for now, making the diff for future padding support a lot smaller.
This and its friend X86ISD::LCMPXCHG8_SAVE_RBX_DAG are used if we need to avoid clobbering the frame pointer in EBX/RBX. EBX/RBX are only used a frame pointer in 64-bit mode. In 64-bit mode we don't use CMPXCHG8B since we have a GR64 cmpxchg available. So we don't need special handling for LCMPXCHG8B.
Split from D88808
Differential Revision: https://reviews.llvm.org/D88853
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
ebx/rbx only needs to be saved when 64-bit registers are supported
anyway. It should be fine to save/restore the whole rbx register
even in gnux32 where the base is technically just ebx.
This matches what we do for cmpxchg16b where rbx is saved/restored
regardless of gnux32.
Preliminary patch for the next stage of PR45974 - we don't want to be creating 'padded' vectors on-the-fly at all in combineX86ShufflesRecursively, and only pad the source inputs if we have a definite match inside combineX86ShuffleChain.
This means that the inputs to combineX86ShuffleChain might soon be smaller than the final root value type, so we should ensure that isTargetShuffleEquivalent only matches with the inputs if they are the correct size.
We should avoid emitting MachineSDNodes from lowering.
We can use the the implicit def handling in InstrEmitter to avoid
manually copying from each xmm result register. We only need to
manually emit the copies for the implicit uses.
Instead of emitting MachineSDNodes during lowering, emit X86ISD
opcodes. These opcodes will either be selected by tablegen
patterns or custom selection code.
Emitting MachineSDNodes during lowering is uncommon so this makes
things more consistent. It also allows selectAddr to be called to
perform address matching during instruction selection.
I had trouble getting tablegen to accept XMM0-XMM7 as results in
an isel pattern for the WIDE instructions so I had to use custom
instruction selection.
This will be further canonicalized to a compare involving 0
which will enable the use of test instructions. Either using
cmovg for signed for cmovne for unsigned.
Fixes more case for PR47049
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
These instructions are implemented with two port 5 uops and one port 015 uop so they are more complicated that most shuffles.
This patch increases the depth threshold for when we form them during shuffle combining to try to limit increasing the number of uops especially on port 5.
Differential Revision: https://reviews.llvm.org/D88503
We can do several optimizations for PDEP using computeKnownBits and SimplifyDemandedBits
-If the MSBs of the output aren't demanded, those MSBs of the mask input aren't demanded either. We need to keep the most significant demanded bit of the mask and any mask bits before it.
-The number of possible ones in the mask determines how many bits of the lsbs of the other operand are demanded. Any bits of the mask we don't demand by the previous rule should not be counted.
-The result will have zeros in any position that the mask is zero.
-Since non-mask input bits can only be output in the original position or a higher bit position, the result will have at least as many trailing zeroes as the non-mask input.
Differential Revision: https://reviews.llvm.org/D87883
A while ago, we converted isShuffleEquivalent/isTargetShuffleEquivalent to both use IsElementEquivalent internally.
This allows us to make the shuffle args optional like isTargetShuffleEquivalent and update foldShuffleOfHorizOp to use isShuffleEquivalent (which it should as its using a ISD::VECTOR_SHUFFLE mask).
Shuffle combining can now handle this output, and by performing this early in combineVectorTruncation we avoid a scalarization that caused a regression on D87502.
The scalar elements of the vXi1 build_vector will have been type legalized to i8 by padding with 0s. So we can't check for all ones. Instead we should just look at bit 0 of the constant.
Differential Revision: https://reviews.llvm.org/D87863
It should be possible to make this generic, but we're not great at checking legality of *_EXTEND_VECTOR_INREG ops so I'm conservatively putting this inside X86ISelLowering.cpp
It should be possible to make this generic, but we're not great at checking legality of *_EXTEND_VECTOR_INREG ops so I'm conservatively putting this inside X86ISelLowering.cpp
After moving WidenedMask is in an undefined state, so reduce scope of the variable so its reinitialized every iteration - we should still retain any memory allocation savings.
We were breaking out of the switch which falls into the default
implementation of SimplifyDemandedBitsForTargetNode which is a
wrapper around computeKnownBits. So we end up doing the recursion
and known bits calculation all over again. Instead we should return
with the known bits we calculated in the switch.
We already handle the the cases where we have a 'zero extended splat' build vector (a, 0, 0, 0, a, 0, 0, 0, ...) but were missing the case where the 'a' scalar was zero-extended as well - such as i64 -> vXi64 splat cases on 32-bit targets.
The register class picked will be the RFP80 register class which has a f80 VT. The code in SelectionDAGBuilder that generates copies around inline assembly doesn't know how to handle an integer and floating point type of different bit widths.
The test case is derived from this https://godbolt.org/z/sEa659 which gcc accepts but clang crashes on. This patch just gives a more graceful error. I'm not sure if the single element struct case is special in gcc. Adding another field to the struct makes gcc reject it. If we want to support this correctly I think we need a change in the frontend to give us the true element type. Right now the frontend just realizes the constraint can take a memory argument so creates an integer type of the same size and bitcasts.
Differential Revision: https://reviews.llvm.org/D87485
Now that we're getting better at combining shuffles of different vector widths, this can now be performed as part of the standard target shuffle combines and isn't required for cleanup.
Exposed a minor issue in combineX86ShufflesRecursively where we failed to check if a shuffle's src ops were simple types.
PR47534 exposes a case where calling lowerShuffleWithSHUFPS directly from a derived repeated mask (found by is128BitLaneRepeatedShuffleMask) results in us using an non-canonicalized mask.
The missed canonicalization in this case is trivial - just commute the mask so we have more (swapped) LHS than RHS references so lowerShuffleWithSHUFPS can handle it.
Drop the pow2 vector limitation for AVG generation by padding the vector to the next pow2, creating the PAVG nodes and then extracting the final subvector.
Fixes some poor codegen that has been annoying me for years.....
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
Follow up to D86429 to handle the remaining regressions.
This patch generalizes lowerShuffleAsDecomposedShuffleBlend to lowerShuffleAsDecomposedShuffleMerge, and attempts to use an UNPCKL shuffle mask instead of a blend for the cases where the inputs are coming from alternating vXi8/vXi16 sources. Technically they don't have to be alternating (just as long as they can fit into a lower lane half for the unpack) but I didn't find as many general cases and it needed a lot more of the function to be altered.
For vXi32/vXi64 cases this could still be beneficial but in most cases the existing permute+blend approach was better.
Differential Revision: https://reviews.llvm.org/D87405
lowerShuffleAsSplitOrBlend always returns a target shuffle result (and is the default operation for lowering some shuffle types), so we don't need to check for null.
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
Rather than using SELECT instructions, use SRA, UADDO/ADDCARRY and
XORs to expand ABS. This is the multi-part version of the sequence
we use in LegalizeDAG.
It's also the same as the Custom sequence uses for i64 on 32-bit
and i128 on 64-bit. So we can remove the X86 customization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D87215
We already simplify the unsigned comparisons if we've found the operands are non-negative, but we were still calling LowerVSETCCWithSUBUS which resulted in the PR47448 regressions.
lowerShuffleWithPERMV allows us to use the ZMM variants for 128/256-bit variable shuffles on non-VLX AVX512 targets.
This is another step towards shuffle combining through between vector widths - we still end up with an annoying regression (combine_vpermilvar_vperm2f128_zero_8f32) but we're going in the right direction....
rGabd33bf5eff2 enabled us to pad 128/256-bit shuffles to 512-bit on non-VLX targets, but wasn't updating binary shuffles to account for the new vector width.
This can cause an infinite loop if SimplifiedDemandedElts asks
for the node to replace itself.
A similar protection exists in other places in shuffle combining.
Fixes ISPC https://github.com/ispc/ispc/issues/1864
Extends lowerShuffleAsLanePermuteAndPermute to search for opportunities to use vpermq (64-bit cross-lane shuffle) and vpermd (32-bit cross-lane shuffle) to get elements into the correct lane, in addition to the 128-bit full-lane permutes it previously searched for.
This is especially helpful in cross-lane byte shuffles, where the alternative tends to be "vpshufb both lanes separately and blend them with a vpblendvb", which is very expensive, especially on Haswell where vpblendvb uses the same execution port as all the shuffles.
Addresses PR47262
Patch By: @TellowKrinkle (TellowKrinkle)
Differential Revision: https://reviews.llvm.org/D86429
If the PSHUFBs have no other uses, then we can force the unselected elements to zero to OR them instead, avoiding both an extra mask load and a costly variable blend.
Eventually we should try to bring this into shuffle combining, once we can more easily convert between shuffles + select patterns.
This patch uses partial DemandedElts masks to further simplify target shuffle chains and finally starts making target shuffle combining part of SimplifyDemandedBits/SimplifyDemandedVectorElts.
We already manage this for Depth == 0 cases, where combineX86ShuffleChain would early-out if the shuffle combined to the same op, but the patch generalizes this by manipulating the depth handling of combineX86ShufflesRecursively - calling with a new Depth = 0 and reducing the maximum shuffle combine depth accordingly.
Differential Revision: https://reviews.llvm.org/D66004
pointer.
mwaitx uses EBX as one of its argument.
Using this instruction clobbers RBX as it is defined to hold one of the
input. When the backend uses dynamically allocated stack, RBX is used as
a reserved register for the base pointer.
This patch is adapted from @qcolombet patch for cmpxchg at r263325.
This fixes PR43528.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D73475
The IsExtractedElement already called getOperand(0) so Extract
here is the source vector. We shouldn't call getOperand(0). This
worked for the original test cases because the result was a
bitcast so the getOperand(0) accidently peeked through the bitcast
which is what we wanted.
In the failing case here, the operand turns out to be undef so
the getOperand(0) asserts because undef has no operands.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=25184
Differential Revision: https://reviews.llvm.org/D86428
Add handling for storing the extracted lower (truncated bits) element from a X86ISD::VTRUNC node - this can be lowered to a generic truncated store directly.
Differential Revision: https://reviews.llvm.org/D86158
Allow non-VLX targets to use 512-bits VPERMV/VPERMV3 for 128/256-bit shuffles.
TBH I'm not sure these targets actually exist in the wild, but we're testing for them and its good test coverage for shuffle lowering/combines across different subvector widths.
This patch adds lowerShuffleWithVTRUNC to handle basic binary shuffles that can be lowered either as a pure ISD::TRUNCATE or a X86ISD::VTRUNC (with undef/zero values in the remaining upper elements).
We concat the binary sources together into a single 256-bit source vector. To avoid regressions we perform this after we've tried to lower with PACKS/PACKUS which typically does a cleaner job than a concat.
For non-AVX512VL cases we have to canonicalize VTRUNC cases to use a 512-bit source vectors (inserting undefs/zeros in the upper elements as necessary), truncate and then (possibly) extract the 128-bit result.
This should address the last regressions in D66004
Differential Revision: https://reviews.llvm.org/D86093
Doesn't really matter in practice but that's how the nodes are
normally created by SelectionDAGBuilder. So we should match.
Found by temporarily hacking type checks into isel table.
Perform lowerShuffleWithVPMOV as part of the v16i8/v8i16 shuffle lowering stages, which are the only types that are currently supported.
We need to expand support for lowering shuffles as truncations to fix the remaining regressions in D66004
We can now enable this for AVX1 targets can now assist with canonicalizeShuffleMaskWithHorizOp cleanup.
There's still a few missed opportunities for merging subvector insert/extracts into shuffles, but they shouldn't cause any regressions now.
Instead of just attempting to fold shuffle(HOP,HOP) for a specific target shuffle, make this part of combineX86ShufflesRecursively so we can perform this on the combined shuffle chain, which is particularly useful for recognising more cases of where we're performing multiple HOPs that can be merged and pre-AVX where we don't have good blend/unary target shuffle support.
Split the isRepeatedTargetShuffleMask into a wrapper variant that takes a MVT describing the mask width, and an internal version that just needs the raw mask element bit size.
This will be necessary for an upcoming change where the horizontal ops element width might not match the shuffle mask element width.
This is beginning to look like a canonicalization stage that could be performed as part of shuffle combining
Another step towards PR41813
Recommit of rG9bd97d036398 with fixed offset adjustments
Pull out element equivalence code from isShuffleEquivalent/isTargetShuffleEquivalent, I've also removed many of the index modulos where possible.
First step toward simply adding some additional equivalence tests.
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
When we use mask compare intrinsics under strict FP option, the masked
elements shouldn't raise any exception. So, we cann't replace the
intrinsic with a full compare + "and" operation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D85385
If a shuffle is referring to both the lower and upper half lanes of an unary horizontal op, then canonicalize the mask to only refer to the lower half.
Check that we're shuffling hadd/pack ops first before altering shuffle masks.
First step towards adding extra functionality, plus it avoids costly shuffle mask manipulation if not necessary.
This was blocking isTypeLegal call so that we could do a particular
transform on illegal types before type legalization. But the we
create a target specific node using that type. We shouldn't do
that if the type isn't legal. So I think we should just always
make sure the type is legal.
I suspect that in order to get the condition VT to not be a vector
of i1 we already completed type legalization anyway so this probably
doesn't matter much in practice.
Previously the transform was doing these two canonicalizations
(x > y) ? x : y -> (x >= y) ? x : y
(x < y) ? x : y -> (x <= y) ? x : y
But those don't seem to be useful generally. And they actively
pessimize the cases in PR47049.
This patch limits it to
(x > 0) ? x : 0 -> (x >= 0) ? x : 0
(x < -1) ? x : -1 -> (x <= -1) ? x : -1
These are the cases mentioned in the comments as the motivation
for the canonicalization. These allow the CMOV to use the S
flag from the compare thus improving opportunities to use a TEST
or the flags from an arithmetic instruction.
In D85499, I attempted to fix this same issue by canonicalizing
andnp for i1 vectors, but since there was some opposition to such
a change, this commit just fixes the bug by using two different
forms depending on which kind of vector type is in use. We can
then always decide to switch the canonical forms later.
Description of the original bug:
We have a DAG combine that tries to fold (vselect cond, 0000..., X) -> (andnp cond, x).
However, it does so by attempting to create an i64 vector with the number
of elements obtained by truncating division by 64 from the bitwidth. This is
bad for mask vectors like v8i1, since that division is just zero. Besides,
we don't want i64 vectors anyway. For i1 vectors, switch the pattern
to (andnp (not cond), x), which is the canonical form for `kandn`
on mask registers.
Fixes https://github.com/JuliaLang/julia/issues/36955.
Differential Revision: https://reviews.llvm.org/D85553
We need to have special handling of i128 div/rem on Windows due
to a weird calling convention needed for the libcall. There was
also some code that made it look like we do the same for sdivrem/udiv,
but the code didn't account for multiple return values of those
functions so couldn't possibly work. I think this code never
triggers because we don't have libcall names defined for those
functions by default so DAGCombine never creates DIVREM nodes.
For example a v4f16 argument is scalarized to 4 i32 values. So
the values are spread out instead of being packed tightly like
in the original vector.
Fixes PR47000.
We've had issues in the past where isHorizontalBinOp calls would affect later combines as the LHS/RHS references had been commuted but still failed to match.
Now that rG47cea9e82dda941e lets us aggressively decode multi-use shuffles for the OR(SHUFFLE(),SHUFFLE()) case we don't need the computeKnownBits variant any more.
Permit lane-crossing post shuffles on AVX1 targets as long as every element comes from the same source lane, which for v8f32/v4f64 cases can be efficiently lowered with the LowerShuffleAsLanePermuteAnd* style methods.
[X86][SSE] Shuffle combine blends to OR(X,Y) if the relevant elements are known zero (REAPPLIED)
This allows us to remove the (depth violating) code in getFauxShuffleMask where we were combining the OR(SHUFFLE,SHUFFLE) shuffle inputs as well, and not just the OR().
This is a minor step toward being able to shuffle combine from/to SELECT/BLENDV as a faux shuffle.
Reapplied with fixed signed/unsigned comparisons.
Test function mask_cmp_128 failed during ISEL
LLVM ERROR: Cannot select: t37: v8i1 = X86ISD::KSHIFTL t48, TargetConstant:i8<4>
due to v8i1 only available under AVX512DQ.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D84922
This allows us to remove the (depth violating) code in getFauxShuffleMask where we were combining the OR(SHUFFLE,SHUFFLE) shuffle inputs as well, and not just the OR().
This is a minor step toward being able to shuffle combine from/to SELECT/BLENDV as a faux shuffle.
We already do this on AVX (+ for ZERO_EXTEND_VECTOR_INREG), but this enables it for all SSE targets - we attempted something similar back at rL357057 but hit issues with the ZERO_EXTEND_VECTOR_INREG handling (PR41249).
I'm still looking at the vector-mul.ll regression - which is due to 32-bit targets performing the load as a f64, resulting in the shuffle combiner thinking it has to create a shuffle in the float domain.
If the upper bits of the __builtin_parity idiom are known to be
0 we were previously emitting an xor with 0 to get the parity flag.
But we can use cmp/test instead which may expose opportunities for
load folding or combining an AND.
Noticed while investigating combining from concatenated shuffle vectors, we weren't checking that PSHUFLW/PSHUFHW was legal - we were depending on lowering splitting to subvectors.
As long as we can extract the lowest 128-bit subvector from the pre-truncated source vector, then we don't care what size it is.
The next stage will be to support non-zero extraction indices, as long as its still coming from the lowest 128-bit subvector.
Instead of never accepting v8f32/v4f64 FHADD/FHSUB if the input shuffle masks cross lanes, perform the matching and determine if the post shuffle mask simplifies to a 'whole lane shuffle' mask - in which case we are guaranteed to cheaply perform this as a VPERM2F128 shuffle.
Philip Reames