As discussed in D55494, we want to extend this to handle 8-bit
ops too, but that could be extended further to enable this on
32-bit systems too.
llvm-svn: 348851
The existing code tries to handle an undef operand while transforming an add to an LEA,
but it's incomplete because we will crash on the i16 test with the debug output shown below.
It's better to just give up instead. Really, GlobalIsel should have folded these before we
could get into trouble.
# Machine code for function add_undef_i16: NoPHIs, TracksLiveness, Legalized, RegBankSelected, Selected
bb.0 (%ir-block.0):
liveins: $edi
%1:gr32 = COPY killed $edi
%0:gr16 = COPY %1.sub_16bit:gr32
%5:gr64_nosp = IMPLICIT_DEF
%5.sub_16bit:gr64_nosp = COPY %0:gr16
%6:gr64_nosp = IMPLICIT_DEF
%6.sub_16bit:gr64_nosp = COPY %2:gr16
%4:gr32 = LEA64_32r killed %5:gr64_nosp, 1, killed %6:gr64_nosp, 0, $noreg
%3:gr16 = COPY killed %4.sub_16bit:gr32
$ax = COPY killed %3:gr16
RET 0, implicit killed $ax
# End machine code for function add_undef_i16.
*** Bad machine code: Reading virtual register without a def ***
- function: add_undef_i16
- basic block: %bb.0 (0x7fe6cd83d940)
- instruction: %6.sub_16bit:gr64_nosp = COPY %2:gr16
- operand 1: %2:gr16
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D54710
llvm-svn: 348722
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
Before this patch, class PredicateExpander only knew how to expand simple
predicates that performed checks on instruction operands.
In particular, the new scheduling predicate syntax was not rich enough to
express checks like this one:
Foo(MI->getOperand(0).getImm()) == ExpectedVal;
Here, the immediate operand value at index zero is passed in input to function
Foo, and ExpectedVal is compared against the value returned by function Foo.
While this predicate pattern doesn't show up in any X86 model, it shows up in
other upstream targets. So, being able to support those predicates is
fundamental if we want to be able to modernize all the scheduling models
upstream.
With this patch, we allow users to specify if a register/immediate operand value
needs to be passed in input to a function as part of the predicate check. Now,
register/immediate operand checks all derive from base class CheckOperandBase.
This patch also changes where TIIPredicate definitions are expanded by the
instructon info emitter. Before, definitions were expanded in class
XXXGenInstrInfo (where XXX is a target name).
With the introduction of this new syntax, we may want to have TIIPredicates
expanded directly in XXXInstrInfo. That is because functions used by the new
operand predicates may only exist in the derived class (i.e. XXXInstrInfo).
This patch is a non functional change for the existing scheduling models.
In future, we will be able to use this richer syntax to better describe complex
scheduling predicates, and expose them to llvm-mca.
Differential Revision: https://reviews.llvm.org/D53880
llvm-svn: 345714
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
Just some gardening here.
Similar to how we moved call information into Candidates, this moves outlined
frame information into OutlinedFunction. This allows us to remove
TargetCostInfo entirely.
Anywhere where we returned a TargetCostInfo struct, we now return an
OutlinedFunction. This establishes OutlinedFunctions as more of a general
repeated sequence, and Candidates as occurrences of those repeated sequences.
llvm-svn: 337848
Before this, TCI contained all the call information for each Candidate.
This moves that information onto the Candidates. As a result, each Candidate
can now supply how it ought to be called. Thus, Candidates will be able to,
say, call the same function in cheaper ways when possible. This also removes
that information from TCI, since it's no longer used there.
A follow-up patch for the AArch64 outliner will demonstrate this.
llvm-svn: 337840
Also move the static folding tables, their search functions and the new class into new cpp/h files.
The unfolding table is effectively static data. It's just a different ordering and a subset of the static folding tables.
By putting it in a separate ManagedStatic we ensure we only have one copy instead of one per X86InstrInfo object. This way also makes it only get initialized when really needed.
llvm-svn: 336056
Previously we used a DenseMap which is costly to set up due to multiple full table rehashes as the size increases and causes the table to be reallocated.
This patch changes the table to a vector of structs. We now walk the reg->mem tables and push new entries in the mem->reg table for each row not marked TB_NO_REVERSE. Once all the table entries have been created, we sort the vector. Then we can use a binary search for lookups.
Differential Revision: https://reviews.llvm.org/D48585
llvm-svn: 335994
Targets should be able to define whether or not they support the outliner
without the outliner being added to the pass pipeline. Before this, the
outliner pass would be added, and ask the target whether or not it supports the
outliner.
After this, it's possible to query the target in TargetPassConfig, before the
outliner pass is created. This ensures that passing -enable-machine-outliner
will not modify the pass pipeline of any target that does not support it.
https://reviews.llvm.org/D48683
llvm-svn: 335887
With the static tables sorted we can binary search them directly for reg->mem lookups. This removes 6 DenseMaps that had to be created when X86InstrInfo is constructed.
We still have one Mem->Reg DenseMap for the reverse direction. This is created just as before by walking the reg->mem arrays to populate it.
Differential Revision: https://reviews.llvm.org/D48527
llvm-svn: 335501
We should be blocking the operand while we are in the routine that tries to find commutable operand indices. Doing it later means we might have missed out on another valid set of operands we could have commuted.
The intrinsic case was the only case that could really prevent commuting in getFMA3OpcodeToCommuteOperands. All the other cases in getThreeSrcCommuteCase were not reachable conditions as they were protected by findThreeSrcCommutedOpIndices.
With that abort case pushed earlier, we can remove all the abort checks and replace with asserts.
llvm-svn: 335446
I don't believe there is any real reason to have separate X86 specific opcodes for vector compares. Setcc has the same behavior just uses a different encoding for the condition code.
I had to change the CondCodeAction for SETLT and SETLE to prevent some transforms from changing SETGT lowering.
Differential Revision: https://reviews.llvm.org/D43608
llvm-svn: 335173
insertOutlinerPrologue was not used by any target, and prologue-esque code was
beginning to appear in insertOutlinerEpilogue. Refactor that into one function,
buildOutlinedFrame.
This just removes insertOutlinerPrologue and renames insertOutlinerEpilogue.
llvm-svn: 335076
Make TII isCopyInstr() return MachineOperands through pointer to pointer
instead via reference.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47364
llvm-svn: 334105
This is setting up to fix bug 37573 cleanly.
This moves data structures that are technically both used in some way by the
target and the general-purpose outlining algorithm into MachineOutliner.h. In
particular, the `Candidate` class is of importance.
Before, the outliner passed the locations of `Candidates` to the target, which
would then make some decisions about the prospective outlined function. This
change allows us to just pass `Candidates` along to the target. This will allow
the target to discard `Candidates` that would be considered unsafe before cost
calculation. Thus, we will be able to remove the unsafe candidates described in
the bug without resorting to torching the entire prospective function.
Also, as a side-effect, it makes the outliner a bit cleaner.
https://bugs.llvm.org/show_bug.cgi?id=37573
llvm-svn: 333952
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Previously, _any_ store or load instruction was considered to be
operating on a spill if it had a frameindex as an operand, and thus
was fair game for optimisations such as "StackSlotColoring". This
usually works, except on architectures where spills can be partially
restored, for example on X86 where a spilt vector can have a single
component loaded (zeroing the rest of the target register). This can be
mis-interpreted and the zero extension unsoundly eliminated, see
pr30821.
To avoid this, this commit optionally provides the caller to
isLoadFromStackSlot and isStoreToStackSlot with the number of bytes
spilt/loaded by the given instruction. Optimisations can then determine
that a full spill followed by a partial load (or vice versa), for
example, cannot necessarily be commuted.
Patch by Jeremy Morse!
Differential Revision: https://reviews.llvm.org/D44782
llvm-svn: 330778
The MachineOutliner has a bunch of target hooks that will call llvm_unreachable
if the target doesn't implement them. Therefore, if you enable the outliner on
such a target, it'll just crash. It'd be much better if it'd just *not* run
the outliner at all in this case.
This commit adds a hook to TargetInstrInfo that returns false by default.
Targets that implement the hook make it return true. The outliner checks the
return value of this hook to decide whether or not to continue.
llvm-svn: 329220
for X86's instruction information. I've now got a second patch under
review that needs these same APIs. This bit is nicely orthogonal and
obvious, so landing it. NFC.
llvm-svn: 328944
X86InstComments.h is used by tools that only have the MC layer. We shouldn't be importing a file from CodeGen into this.
X86InstrInfo.h isn't a great place, but I couldn't find a better one.
llvm-svn: 327202
Add support for custom execution domain fixing and implement support for BLENDPD/BLENDPS/PBLENDD/PBLENDW.
Differential Revision: https://reviews.llvm.org/D42042
llvm-svn: 322524
This commit does two things. Firstly, it adds a collection of flags which can
be passed along to the target to encode information about the MBB that an
instruction lives in to the outliner.
Second, it adds some of those flags to the AArch64 outliner in order to add
more stack instructions to the list of legal instructions that are handled
by the outliner. The two flags added check if
- There are calls in the MachineBasicBlock containing the instruction
- The link register is available in the entire block
If the link register is available and there are no calls, then a stack
instruction can always be outlined without fixups, regardless of what it is,
since in this case, the outliner will never modify the stack to create a
call or outlined frame.
The motivation for doing this was checking which instructions are most often
missed by the outliner. Instructions like, say
%sp<def> = ADDXri %sp, 32, 0; flags: FrameDestroy
are very common, but cannot be outlined in the case that the outliner might
modify the stack. This commit allows us to outline instructions like this.
llvm-svn: 322048
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Say you have two identical linkonceodr functions, one in M1 and one in M2.
Say that the outliner outlines A,B,C from one function, and D,E,F from another
function (where letters are instructions). Now those functions are not
identical, and cannot be deduped. Locally to M1 and M2, these outlining
choices would be good-- to the whole program, however, this might not be true!
To mitigate this, this commit makes it so that the outliner sees linkonceodr
functions as unsafe to outline from. It also adds a flag,
-enable-linkonceodr-outlining, which allows the user to specify that they
want to outline from such functions when they know what they're doing.
Changing this handles most code size regressions in the test suite caused by
competing with linker dedupe. It also doesn't have a huge impact on the code
size improvements from the outliner. There are 6 tests that regress > 5% from
outlining WITH linkonceodrs to outlining WITHOUT linkonceodrs. Overall, most
tests either improve or are not impacted.
Not outlined vs outlined without linkonceodrs:
https://hastebin.com/raw/qeguxavuda
Not outlined vs outlined with linkonceodrs:
https://hastebin.com/raw/edepoqoqic
Outlined with linkonceodrs vs outlined without linkonceodrs:
https://hastebin.com/raw/awiqifiheb
Numbers generated using compare.py with -m size.__text. Tests run for AArch64
with -Oz -mllvm -enable-machine-outliner -mno-red-zone.
llvm-svn: 315136
This commit allows the outliner to avoid saving and restoring the link register
on AArch64 when it is dead within an entire class of candidates.
This introduces changes to the way the outliner interfaces with the target.
For example, the target now interfaces with the outliner using a
MachineOutlinerInfo struct rather than by using getOutliningCallOverhead and
getOutliningFrameOverhead.
This also improves several comments on the outliner's cost model.
https://reviews.llvm.org/D36721
llvm-svn: 314341
This commit
- Removes IsTailCall and replaces it with a target-defined unsigned
- Refactors getOutliningCallOverhead and getOutliningFrameOverhead so that they don't use IsTailCall
- Adds a call class + frame class classification to OutlinedFunction and Candidate respectively
This accomplishes a couple things.
Firstly, we don't need the notion of *tail call* in the general outlining algorithm.
Secondly, we now can have different "outlining classes" for each candidate within a set of candidates.
This will make it easy to add new ways to outline sequences for certain targets and dynamically choose
an appropriate cost model for a sequence depending on the context that that sequence lives in.
Ultimately, this should get us closer to being able to do something like, say avoid saving the link
register when outlining AArch64 instructions.
llvm-svn: 309475
This is some more cleanup in preparation for some actual
functional changes. This splits getOutliningBenefit into
two cost functions: getOutliningCallOverhead and
getOutliningFrameOverhead. These functions return the
number of instructions that would be required to call
a specific function and the number of instructions
that would be required to construct a frame for a
specific funtion. The actual outlining benefit logic
is moved into the outliner, which calls these functions.
The goal of refactoring getOutliningBenefit is to:
- Get us closer to getting rid of the IsTailCall flag
- Further split up "target-specific" things and
"general algorithm" things
llvm-svn: 309356
Summary:
Move getX86ConditionCode() from X86FastISel.cpp to X86InstrInfo.cpp so it can be used by GloabalIsel instruction selector.
This is a pre-commit for a patch I'm working on to support G_ICMP. NFC.
Reviewers: zvi, guyblank, delena
Reviewed By: guyblank, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33038
llvm-svn: 302767
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
Instructions CALLSEQ_START..CALLSEQ_END and their target dependent
counterparts keep data like frame size, stack adjustment etc. These
data are accessed by getOperand using hard coded indices. It is
error prone way. This change implements the access by special methods,
which improve readability and allow changing data representation without
massive changes of index values.
Differential Revision: https://reviews.llvm.org/D31953
llvm-svn: 300196
In fact this default implementation should be the only implementation,
keep it virtual for now to accomodate targets that don't model flags
correctly.
Differential Revision: https://reviews.llvm.org/D30747
llvm-svn: 297980
This commit adds tail call support to the MachineOutliner pass. This allows
the outliner to insert jumps rather than calls in areas where tail calling is
possible. Outlined tail calls include the return or terminator of the basic
block being outlined from.
Tail call support allows the outliner to take returns and terminators into
consideration while finding candidates to outline. It also allows the outliner
to save more instructions. For example, in the X86-64 outliner, a tail called
outlined function saves one instruction since no return has to be inserted.
llvm-svn: 297653
Fixed the asan bot failure which led to the last commit of the outliner being reverted.
The change is in lib/CodeGen/MachineOutliner.cpp in the SuffixTree's constructor. LeafVector
is no longer initialized using reserve but just a standard constructor.
llvm-svn: 297081
This is a patch for the outliner described in the RFC at:
http://lists.llvm.org/pipermail/llvm-dev/2016-August/104170.html
The outliner is a code-size reduction pass which works by finding
repeated sequences of instructions in a program, and replacing them with
calls to functions. This is useful to people working in low-memory
environments, where sacrificing performance for space is acceptable.
This adds an interprocedural outliner directly before printing assembly.
For reference on how this would work, this patch also includes X86
target hooks and an X86 test.
The outliner is run like so:
clang -mno-red-zone -mllvm -enable-machine-outliner file.c
Patch by Jessica Paquette<jpaquette@apple.com>!
rdar://29166825
Differential Revision: https://reviews.llvm.org/D26872
llvm-svn: 296418
This reverts r294348, which removed support for conditional tail calls
due to the PR above. It fixes the PR by marking live registers as
implicitly used and defined by the now predicated tailcall. This is
similar to how IfConversion predicates instructions.
Differential Revision: https://reviews.llvm.org/D29856
llvm-svn: 295262
They are currently modelled incorrectly (as calls, which clobber
registers, confusing e.g. Machine Copy Propagation).
Reverting until we figure out the proper solution.
llvm-svn: 294348
This patch moves the class for scheduling adjacent instructions,
MacroFusion, to the target.
In AArch64, it also expands the fusion to all instructions pairs in a
scheduling block, beyond just among the predecessors of the branch at the
end.
Differential revision: https://reviews.llvm.org/D28489
llvm-svn: 293737
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
VPTERNLOG is a ternary instruction with an immediate specifying the logical operation to perform. For each bit position in the 3 source vectors the bit from each source is concatenated together and the resulting 3-bit value is used to select a bit in the immediate. This bit value is written to the result vector.
We can commute this by swapping operands and modifying the immediate. To modify the immediate we need to swap two pairs of bits. The pairs correspond to the locations in the immediate where the commuted operands bits have opposite values and the uncommuted operand has the same value. Bits 0 and 7 will never be swapped since the relevant bits from all sources are the same value.
This refactors and reuses parts of the FMA3 commuting code which is also a three operand instruction.
llvm-svn: 282132
When branching to a block that immediately tail calls, it is possible to fold
the call directly into the branch if the call is direct and there is no stack
adjustment, saving one byte.
Example:
define void @f(i32 %x, i32 %y) {
entry:
%p = icmp eq i32 %x, %y
br i1 %p, label %bb1, label %bb2
bb1:
tail call void @foo()
ret void
bb2:
tail call void @bar()
ret void
}
before:
f:
movl 4(%esp), %eax
cmpl 8(%esp), %eax
jne .LBB0_2
jmp foo
.LBB0_2:
jmp bar
after:
f:
movl 4(%esp), %eax
cmpl 8(%esp), %eax
jne bar
.LBB0_1:
jmp foo
I don't expect any significant size savings from this (on a Clang bootstrap I
saw 288 bytes), but it does make the code a little tighter.
This patch only does 32-bit, but 64-bit would work similarly.
Differential Revision: https://reviews.llvm.org/D24108
llvm-svn: 280832
This helped to improved memory-folding and register coalescing optimizations.
Also, this patch fixed the tracker #17229.
Reviewer: Craig Topper.
Differential Revision: https://reviews.llvm.org/D23108
llvm-svn: 278431
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Since r207518 they are printed exactly like non-hidden stubs on x86 and
since r207517 on ARM.
This means we can use a single set for all stubs in those platforms.
llvm-svn: 269776
SystemZ (and probably other targets as well) can fold a memory operand
by changing the opcode into a new instruction that as a side-effect
also clobbers the CC-reg.
In order to do this, liveness of that reg must first be checked. When
LIS is passed, getRegUnit() can be called on it and the right
LiveRange is computed on demand.
Reviewed by Matthias Braun.
http://reviews.llvm.org/D19861
llvm-svn: 269026
This is the same as r255936, with added logic for avoiding clobbering of the
red zone (PR26023).
Differential Revision: http://reviews.llvm.org/D18246
llvm-svn: 264375
Currently, AnalyzeBranch() fails non-equality comparison between floating points
on X86 (see https://llvm.org/bugs/show_bug.cgi?id=23875). This is because this
function can modify the branch by reversing the conditional jump and removing
unconditional jump if there is a proper fall-through. However, in the case of
non-equality comparison between floating points, this can turn the branch
"unanalyzable". Consider the following case:
jne.BB1
jp.BB1
jmp.BB2
.BB1:
...
.BB2:
...
AnalyzeBranch() will reverse "jp .BB1" to "jnp .BB2" and then "jmp .BB2" will be
removed:
jne.BB1
jnp.BB2
.BB1:
...
.BB2:
...
However, AnalyzeBranch() cannot analyze this branch anymore as there are two
conditional jumps with different targets. This may disable some optimizations
like block-placement: in this case the fall-through behavior is enforced even if
the fall-through block is very cold, which is suboptimal.
Actually this optimization is also done in block-placement pass, which means we
can remove this optimization from AnalyzeBranch(). However, currently
X86::COND_NE_OR_P and X86::COND_NP_OR_E are not reversible: there is no defined
negation conditions for them.
In order to reverse them, this patch defines two new CondCode X86::COND_E_AND_NP
and X86::COND_P_AND_NE. It also defines how to synthesize instructions for them.
Here only the second conditional jump is reversed. This is valid as we only need
them to do this "unconditional jump removal" optimization.
Differential Revision: http://reviews.llvm.org/D11393
llvm-svn: 264199
Change TargetInstrInfo API to take `MachineInstr&` instead of
`MachineInstr*` in the functions related to predicated instructions
(I'll try to come back later and get some of the rest). All of these
functions require non-null parameters already, so references are more
clear. As a bonus, this happens to factor away a host of implicit
iterator => pointer conversions.
No functionality change intended.
llvm-svn: 261605
Currently, AnalyzeBranch() fails non-equality comparison between floating points
on X86 (see https://llvm.org/bugs/show_bug.cgi?id=23875). This is because this
function can modify the branch by reversing the conditional jump and removing
unconditional jump if there is a proper fall-through. However, in the case of
non-equality comparison between floating points, this can turn the branch
"unanalyzable". Consider the following case:
jne.BB1
jp.BB1
jmp.BB2
.BB1:
...
.BB2:
...
AnalyzeBranch() will reverse "jp .BB1" to "jnp .BB2" and then "jmp .BB2" will be
removed:
jne.BB1
jnp.BB2
.BB1:
...
.BB2:
...
However, AnalyzeBranch() cannot analyze this branch anymore as there are two
conditional jumps with different targets. This may disable some optimizations
like block-placement: in this case the fall-through behavior is enforced even if
the fall-through block is very cold, which is suboptimal.
Actually this optimization is also done in block-placement pass, which means we
can remove this optimization from AnalyzeBranch(). However, currently
X86::COND_NE_OR_P and X86::COND_NP_OR_E are not reversible: there is no defined
negation conditions for them.
In order to reverse them, this patch defines two new CondCode X86::COND_E_AND_NP
and X86::COND_P_AND_NE. It also defines how to synthesize instructions for them.
Here only the second conditional jump is reversed. This is valid as we only need
them to do this "unconditional jump removal" optimization.
Differential Revision: http://reviews.llvm.org/D11393
llvm-svn: 258847
The red zone consists of 128 bytes beyond the stack pointer so that the
allocation of objects in leaf functions doesn't require decrementing
rsp. In r255656, we introduced an optimization that would cheaply
materialize certain constants via push/pop. Push decrements the stack
pointer and stores it's result at what is now the top of the stack.
However, this means that using push/pop would encroach on the red zone.
PR26023 gives an example where this corrupts an object in the red zone.
llvm-svn: 256808
Use the 3-byte (4 with REX prefix) push-pop sequence for materializing
small constants. This is smaller than using a mov (5, 6 or 7 bytes
depending on size and REX prefix), but it's likely to be slower, so
only used for 'minsize'.
This is a follow-up to r255656.
Differential Revision: http://reviews.llvm.org/D15549
llvm-svn: 255936
All 3 operands of FMA3 instructions are commutable now.
Patch by Slava Klochkov
Reviewers: Quentin Colombet(qcolombet), Ahmed Bougacha(ab).
Differential Revision: http://reviews.llvm.org/D13269
llvm-svn: 252335
This patch improves the memory folding of the inserted float element for the (V)INSERTPS instruction.
The existing implementation occurs in the DAGCombiner and relies on the narrowing of a whole vector load into a scalar load (and then converted into a vector) to (hopefully) allow folding to occur later on. Not only has this proven problematic for debug builds, it also prevents other memory folds (notably stack reloads) from happening.
This patch removes the old implementation and moves the folding code to the X86 foldMemoryOperand handler. A new private 'special case' function - foldMemoryOperandCustom - has been added to deal with memory folding of instructions that can't just use the lookup tables - (V)INSERTPS is the first of several that could be done.
It also tweaks the memory operand folding code with an additional pointer offset that allows existing memory addresses to be modified, in this case to convert the vector address to the explicit address of the scalar element that will be inserted.
Unlike the previous implementation we now set the insertion source index to zero, although this is ignored for the (V)INSERTPSrm version, anything that relied on shuffle decodes (such as unfolding of insertps loads) was incorrectly calculating the source address - I've added a test for this at insertps-unfold-load-bug.ll
Differential Revision: http://reviews.llvm.org/D13988
llvm-svn: 252074
This takes the existing static function hasLiveCondCodeDef and makes it a member function of the X86InstrInfo class. This is a useful utility function that an upcoming change would like to use. NFC.
Patch by: Kevin B. Smith
Differential Revision: http://reviews.llvm.org/D12371
llvm-svn: 246073
This commit implements the initial serialization of the machine operand target
flags. It extends the 'TargetInstrInfo' class to add two new methods that help
to provide text based serialization for the target flags.
This commit can serialize only the X86 target flags, and the target flags for
the other targets will be serialized in the follow-up commits.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 244185
canFoldMemoryOperand is not actually used anywhere in the codebase - all existing users instead call foldMemoryOperand directly when they wish to fold and can correctly deduce what they need from the return value.
This patch removes the canFoldMemoryOperand base function and the target implementations; only x86 had a real (bit-rotted) implementation, although AMDGPU had a preparatory stub that had never needed to be completed.
Differential Revision: http://reviews.llvm.org/D11331
llvm-svn: 242638
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
NFC: no one uses AnalyzeBranchPredicate yet.
Add TargetInstrInfo::AnalyzeBranchPredicate and implement for x86. A
later change adding support for page-fault based implicit null checks
depends on this.
Reviewers: reames, ab, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10200
llvm-svn: 239742
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
llvm-svn: 239741
This will use Itinieraries if available, but will also work if just a
MCSchedModel is available.
Differential Revision: http://reviews.llvm.org/D10428
llvm-svn: 239658
This is a reimplementation of D9780 at the machine instruction level rather than the DAG.
Use the MachineCombiner pass to reassociate scalar single-precision AVX additions (just a
starting point; see the TODO comments) to increase ILP when it's safe to do so.
The code is closely based on the existing MachineCombiner optimization that is implemented
for AArch64.
This patch should not cause the kind of spilling tragedy that led to the reversion of r236031.
Differential Revision: http://reviews.llvm.org/D10321
llvm-svn: 239486
Summary:
This was a longstanding FIXME and is a necessary precursor to cases
where foldOperandImpl may have to create more than one instruction
(e.g. to constrain a register class). This is the split out NFC changes from
D6262.
Reviewers: pete, ributzka, uweigand, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, ted, llvm-commits
Differential Revision: http://reviews.llvm.org/D10174
llvm-svn: 239336
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227752
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227728
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
llvm-svn: 225908
Added RegOp2MemOpTable4 to transform 4th operand from register to memory in merge-masked versions of instructions.
Added lowering tests.
llvm-svn: 224516
Sanjay Patel