Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: thopre, yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
Assume bundle can have more than one entry with the same name,
but at least AlignmentFromAssumptionsPass::extractAlignmentInfo() uses
getOperandBundle("align"), which internally assumes that it isn't the
case, and happily crashes otherwise.
Minimal reduced reproducer: run `opt -alignment-from-assumptions` on
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
%0 = type { i64, %1*, i8*, i64, %2, i32, %3*, i8* }
%1 = type opaque
%2 = type { i8, i8, i16 }
%3 = type { i32, i32, i32, i32 }
; Function Attrs: nounwind
define i32 @f(%0* noalias nocapture readonly %arg, %0* noalias %arg1) local_unnamed_addr #0 {
bb:
call void @llvm.assume(i1 true) [ "align"(%0* %arg, i64 8), "align"(%0* %arg1, i64 8) ]
ret i32 0
}
; Function Attrs: nounwind willreturn
declare void @llvm.assume(i1) #1
attributes #0 = { nounwind "reciprocal-estimates"="none" }
attributes #1 = { nounwind willreturn }
This is what we'd have with -mllvm -enable-knowledge-retention
This reverts commit c95ffadb24.
If the addend of the fma is zero, common sense would suggest that we can
convert fma x, y, 0.0 to fmul x, y. This comes up with some user code
that was expecting the first fma in an unrolled loop to simplify to a
fmul.
Floating point often does not follow naive common sense though. Alive
suggests that this should be guarded by nsz (as fadd -0.0, 0.0 = 0.0).
fma x, y, -0.0 is always valid.
Differential Revision: https://reviews.llvm.org/D82778
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
Remove the function Instruction::setProfWeight() and make
use of Instruction::copyMetadata(.., {LLVMContext::MD_prof}).
This is correct for all use cases of setProfWeight() as it
is applied to CallBase instructions only.
This change results in prof metadata copied intact even if
the source has "VP". The old pair of calls
extractProfTotalWeight() + setProfWeight() resulted in
setting branch_weights if the source had "VP" data.
Reviewers: yamauchi, davidxl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80987
Now that all of the statepoint related routines have classes with isa support, let's cleanup.
I'm leaving the (dead) utitilities in tree for a few days so that I can do the same cleanup downstream without breakage.
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
We have to assume undef could be an snan, which would need quieting so
returning qnan is safer than undef. Also consider strictfp, and don't
care if the result rounded.
This really belongs in InstructionSimplify since it doesn't introduce
new instructions. Put it in instcombine to avoid increasing the number
of passes considering target intrinsics.
I also noticed that we seem to now be interpreting strictfp attributes
on call sites, so try to handle that.
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
Summary:
Remove incorrect usage of getNumElements() from visitCallInst(). The
number of elements was being used to construct a DemandedElts bitfield.
This operation does not make sense for scalable vectors. Cast to
FixedVectorType
Identified by test case Clang :: CodeGen/aarch64-sve-intrinsics/acle_sve_mla.c
Reviewers: rengolin, efriedma, sdesmalen, c-rhodes, david-arm
Reviewed By: david-arm
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79524
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
As discussed in PR45478:
https://bugs.llvm.org/show_bug.cgi?id=45478
...propagating FMF from the outer (second) call is not correct,
so intersect them instead.
I suspect we could do better (see TODO comment), but mismatched
FMF is probably too rare to care about.
Differential Revision: https://reviews.llvm.org/D78631
The handling of the `returned` attribute in D75815 did miss the case
where the argument is (bit)casted to a different type. This is
explicitly allowed by the language reference and exposed by the
Attributor.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D77977
Passing a Value * to CreateCall has to call getPointerElementType
to find the type of the pointer.
In this case we can rely on the fact that Intrinsic::getDeclaration
returns a Function * and use that version of CreateCall.
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sdesmalen, rriddle, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77263
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
Make InstCombine aware of the aligned_alloc library function.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Depends on D76970.
Differential Revision: https://reviews.llvm.org/D76971
Add a new llvm.amdgcn.ballot intrinsic modeled on the ballot function
in GLSL and other shader languages. It returns a bitfield containing the
result of its boolean argument in all active lanes, and zero in all
inactive lanes.
This is intended to replace the existing llvm.amdgcn.icmp and
llvm.amdgcn.fcmp intrinsics after a suitable transition period.
Use the new intrinsic in the atomic optimizer pass.
Differential Revision: https://reviews.llvm.org/D65088
Two one-use checks were added with rGfdcb27105537,
but only the first one is necessary to limit an
increase in instruction count. The second transform
only creates one instruction, so it is always a
reasonable canonicalization/optimization.
The sll/srl/sra scalar vector shifts can be replaced with generic shifts if the shift amount is known to be in range.
This also required public DemandedElts variants of llvm::computeKnownBits to be exposed (PR36319).
If a call argument has the "returned" attribute, we can simplify
the call to the value of that argument. This was already partially
handled by InstSimplify/InstCombine for the case where the argument
is an integer constant, and the result is thus known via known bits.
The non-constant (or non-int) argument cases weren't handled though.
This previously landed as an InstSimplify transform, but was reverted
due to assertion failures when compiling the Linux kernel. The reason
is that simplifying a call to another call breaks assumptions in
call graph updating during inlining. As the code is not easy to fix,
and there is no particularly strong motivation for having this in
InstSimplify, the transform is only performed in InstCombine instead.
Differential Revision: https://reviews.llvm.org/D75815
If we know the SSE shift amount is out of range then we can simplify to zero value (logical) or a 'signsplat' bitwidth-1 shift (arithmetic). This allows us to remove the equivalent ConstantInt constant folding path from simplifyX86immShift.
The slli/srli/srai 'immediate' vector shifts (although its not immediate anymore to match gcc) can be replaced with generic shifts if the shift amount is known to be in range.
Summary: Prevent InstCombine from removing llvm.assume for which the arguement is true when they have operand bundles with usefull information.
Reviewers: jdoerfert, nikic, lebedev.ri
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76147
According to LangRef:
If len is not a positive integer multiple of element_size, then the behaviour of the intrinsic is undefined.
Add InstCombine rule to transform intrinsic to undef operation.
This is a follow-up for D76116.
Reviewers: reames
Reviewed By: reames
Subscribers: hiraditya, jfb, dantrushin, llvm-commits
Differential Revision: https://reviews.llvm.org/D76215
When simplifying a call without uses, replaceInstUsesWith() is
going to do nothing, but we'll skip all following folds. We can
only run into this problem with calls that both simplify and are
not trivially dead if unused, which currently seems to happen only
with calls to undef, as the test diff shows. When extending
SimplifyCall() to handle "returned" attributes, this becomes a much
bigger problem, so I'm fixing this first.
Differential Revision: https://reviews.llvm.org/D75814
This removes everything but int_x86_avx512_mask_vcvtph2ps_512 which provides the SAE variant, but even this can use the fpext generic if the rounding control is the default.
Differential Revision: https://reviews.llvm.org/D75162
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
InstCombine removes pairs of start+end intrinsics that don't
have anything in between them. Currently this is done by starting
at the start intrinsic and scanning forwards. This patch changes
it to start at the end intrinsic and scan backwards.
The motivation here is as follows: When we process the start
intrinsic, we have not yet looked at the following instructions,
which may still get folded/removed. If they do, we will only be
able to remove the start/end pair on the next iteration. When we
process the end intrinsic, all the instructions before it have
already been visited, and we don't run into this problem.
Differential Revision: https://reviews.llvm.org/D75011
Followup to D73919 with another batch of replacements of
setOperand() -> replaceOperand(), to make sure the old
operand gets DCEd right away.
Differential Revision: https://reviews.llvm.org/D74932
This changes the SimplifyLibCalls utility to accept an IRBuilderBase,
which allows us to pass through the IRBuilder used by InstCombine.
This will ensure that new instructions get added to the worklist.
The annotated test-case drops from 4 to 2 InstCombine iterations thanks
to this.
To achieve this, I'm adding an IRBuilderBase::OperandBundlesGuard,
which is basically the same as the existing InsertPointGuard and
FastMathFlagsGuard, but for operand bundles. Also add a
setDefaultOperandBundles() method so these can be set outside the
constructor.
Differential Revision: https://reviews.llvm.org/D74792
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
When multiple guard intrinsics are merged into one, currently the
result of eraseInstFromFunction() is returned -- however, this
should only be done if the current instruction is being removed.
In this case we're removing a different instruction and should
instead report that the current one has been modified by returning it.
For this test case, this reduces the number of instcombine iterations
from 5 to 2 (the minimum possible).
Differential Revision: https://reviews.llvm.org/D72558
The instructions use a mask to either pack disjoint bits together(pext) or spread bits to disjoint locations(pdep). If the mask is all 0s then no bits are extracted or deposited. If the mask is all ones, then the source value is written to the result since no compression or expansion happens. Otherwise if both the source and mask are constant we can walk the bits in the source/mask and calculate the result.
There other crazier things we could do like computeKnownBits or turning pext into shift/and if only a single contiguous range of bits is extracted.
Fixes PR44389
Differential Revision: https://reviews.llvm.org/D71952
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Constructor invocations such as `APFloat(APFloat::IEEEdouble(), 0.0)`
may seem like they accept a FP (floating point) value, but the overload
they reach is actually the `integerPart` one, not a `float` or `double`
overload (which only exists when `fltSemantics` isn't passed).
This may lead to possible loss of data, by the conversion from `float`
or `double` to `integerPart`.
To prevent future mistakes, a new constructor overload, which accepts
any FP value and marked with `delete`, to prevent its usage.
Fixes PR34095.
Differential Revision: https://reviews.llvm.org/D70425
Summary:
If a user writing C code using the ACLE MVE intrinsics generates a
predicate and then complements it, then the resulting IR will use the
`pred_v2i` IR intrinsic to turn some `<n x i1>` vector into a 16-bit
integer; complement that integer; and convert back. This will generate
machine code that moves the predicate out of the `P0` register,
complements it in an integer GPR, and moves it back in again.
This InstCombine rule replaces `i2v(~v2i(x))` with a direct complement
of the original predicate vector, which we can already instruction-
select as the VPNOT instruction which complements P0 in place.
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70484
If the sign of the sign argument is known (this could be extended to use ValueTracking),
then we can use fneg+fabs to clear/set the sign bit of the magnitude argument.
http://llvm.org/docs/LangRef.html#llvm-copysign-intrinsic
This transform is already done in DAGCombiner, but we can do it sooner in IR as
suggested in PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
We have effectively no analysis for copysign in IR, so we are taking the unusual step
of increasing the number of IR instructions for the negative constant case.
Differential Revision: https://reviews.llvm.org/D70792
If you're writing C code using the ACLE MVE intrinsics that passes the
result of a vcmp as input to a predicated intrinsic, e.g.
mve_pred16_t pred = vcmpeqq(v1, v2);
v_out = vaddq_m(v_inactive, v3, v4, pred);
then clang's codegen for the compare intrinsic will create calls to
`@llvm.arm.mve.pred.v2i` to convert the output of `icmp` into an
`mve_pred16_t` integer representation, and then the next intrinsic
will call `@llvm.arm.mve.pred.i2v` to convert it straight back again.
This will be visible in the generated code as a `vmrs`/`vmsr` pair
that move the predicate value pointlessly out of `p0` and back into it again.
To prevent that, I've added InstCombine rules to remove round trips of
the form `v2i(i2v(x))` and `i2v(v2i(x))`. Also I've taught InstCombine
about the known and demanded bits of those intrinsics. As a result,
you now get just the generated code you wanted:
vpt.u16 eq, q1, q2
vaddt.u16 q0, q3, q4
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70313
The MVE VADC instruction reads and writes the carry bit at bit 29 of
the FPSCR register. The corresponding ACLE intrinsic is specified to
work with an integer in which the carry bit is stored at bit 0. So if
a user writes a code sequence in C that passes the carry from one VADC
to the next, like this,
s0 = vadcq_u32(a0, b0, &carry);
s1 = vadcq_u32(a1, b1, &carry);
then clang will generate IR for each of those operations that shifts
the carry bit up into bit 29 before the VADC, and after it, shifts it
back down and masks off all but the low bit. But in this situation
what you really wanted was two consecutive VADC instructions, so that
the second one directly reads the value left in FPSCR by the first,
without wasting several instructions on pointlessly clearing the other
flag bits in between.
This commit explains to InstCombine that the other bits of the flags
operand don't matter, and adds a test that demonstrates that all the
code between the two VADC instructions can be optimized away as a
result.
Reviewers: dmgreen, miyuki, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67162
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
If we generate the gc.relocate, and then later prove two arguments to the statepoint are equivalent, we should canonicalize the gc.relocate to the form we would have produced if this had been known before rewriting.
llvm-svn: 372771
"Implementations are free to malloc() a buffer containing either (size + 1) bytes or (strnlen(s, size) + 1) bytes. Applications should not assume that strndup() will allocate (size + 1) bytes when strlen(s) is smaller than size."
llvm-svn: 372647
Summary:
Motivation:
- If we can fold it to strdup, we should (strndup does more things than strdup).
- Annotation mechanism. (Works for strdup well).
strdup and strndup are part of C 20 (currently posix fns), so we should optimize them.
Reviewers: efriedma, jdoerfert
Reviewed By: jdoerfert
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67679
llvm-svn: 372636
This allows us to fold fma's that multiply with 0.0. Also, the
multiply by 1.0 case is handled there as well. The fneg/fabs cases
are not handled by SimplifyFMulInst, so we need to keep them.
Reviewers: spatel, anemet, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D67351
llvm-svn: 371518
This makes the functions in Loads.h require a type to be specified
independently of the pointer Value so that when pointers have no structure
other than address-space, it can still do its job.
Most callers had an obvious memory operation handy to provide this type, but a
SROA and ArgumentPromotion were doing more complicated analysis. They get
updated to merge the properties of the various instructions they were
considering.
llvm-svn: 365468
Prefer the more exact intrinsic to remove a use of the input value
and possibly make further transforms easier (we will still need
to match patterns with funnel-shift of wider types as pieces of
bswap, especially if we want to canonicalize to funnel-shift with
constant shift amount). Discussed in D46760.
llvm-svn: 364187
I'm not 100% sure about this, since I'm worried about IR transforms
that might end up introducing divergence downstream once replaced with
a constant, but I haven't come up with an example yet.
llvm-svn: 363406
When the byval attribute has a type, it must match the pointee type of
any parameter; but InstCombine was not updating the attribute when
folding casts of various kinds away.
llvm-svn: 362643
Based on the overflow direction information added in D62463, we can
now fold always overflowing signed saturating add/sub to signed min/max.
Differential Revision: https://reviews.llvm.org/D62544
llvm-svn: 362006
In order to fold an always overflowing signed saturating add/sub,
we need to know in which direction the always overflow occurs.
This patch splits up AlwaysOverflows into AlwaysOverflowsLow and
AlwaysOverflowsHigh to pass through this information (but it is
not used yet).
Differential Revision: https://reviews.llvm.org/D62463
llvm-svn: 361858
We were turning roundss/sd/ps/pd intrinsics with immediates of 1 or 2 into
llvm.floor/ceil. The llvm.ceil/floor intrinsics are supposed to correspond
to the libm functions. For the libm functions we need to disable the
precision exception so the llvm.floor/ceil functions should always map to
encodings 0x9 and 0xA.
We had a mix of isel patterns where some used 0x9 and 0xA and others used
0x1 and 0x2. We need to be consistent and always use 0x9 and 0xA.
Since we have no way in isel of knowing where the llvm.ceil/floor came
from, we can't map X86 specific intrinsics with encodings 1 or 2 to it.
We could map 0x9 and 0xA to llvm.ceil/floor instead, but I'd really like
to see a use case and optimization advantage first.
I've left the backend test cases to show the blend we now emit without
the extra isel patterns. But I've removed the InstCombine tests completely.
llvm-svn: 361425
This patch rewrites the existing PACKSS/PACKUS constant folding code to expand as a generic expansion.
This is a first NFCI step toward expanding PACKSS/PACKUS intrinsics which are acting as non-saturating truncations (although technically the expansion could be used in all cases - but we'll probably want to be conservative).
llvm-svn: 359111
If we have a masked.load from a location we know to be dereferenceable, we can simply issue a speculative unconditional load against that address. The key advantage is that it produces IR which is well understood by the optimizer. The select (cnd, load, passthrough) form produced should be pattern matchable back to hardware predication if profitable.
Differential Revision: https://reviews.llvm.org/D59703
llvm-svn: 359000
If we have a store to a piece of memory which is known constant, then we know the store must be storing back the same value. As a result, the store (or memset, or memmove) must either be down a dead path, or a noop. In either case, it is valid to simply remove the store.
The motivating case for this involves a memmove to a buffer which is constant down a path which is dynamically dead.
Note that I'm choosing to implement the less aggressive of two possible semantics here. We could simply say that the store *is undefined*, and prune the path. Consensus in the review was that the more aggressive form might be a good follow on change at a later date.
Differential Revision: https://reviews.llvm.org/D60659
llvm-svn: 358919
In the process, use the existing masked.load combine which is slightly stronger, and handles a mix of zero and undef elements in the mask.
llvm-svn: 358913
In InstCombine, we use an idiom of "store i1 true, i1 undef" to indicate we've found a path which we've proven unreachable. We can't actually insert the unreachable instruction since that would require changing the CFG. We leave that to simplifycfg later.
This just factors out that idiom creation so we don't duplicate the same mostly undocument idiom creation in multiple places.
llvm-svn: 358600
If a constant shift amount is used, then only some of the LHS/RHS
operand bits are demanded and we may be able to simplify based on
that. InstCombineSimplifyDemanded already had the necessary support
for that, we just weren't calling it with fshl/fshr as root.
In particular, this allows us to relax some masked funnel shifts
into simple shifts, as shown in the tests.
Patch by Shawn Landden.
Differential Revision: https://reviews.llvm.org/D60660
llvm-svn: 358515
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
ssubo X, C is equivalent to saddo X, -C. Make the transformation in
InstCombine and allow the logic implemented for saddo to fold prior
usages of add nsw or sub nsw with constants.
Patch by Dan Robertson.
Differential Revision: https://reviews.llvm.org/D60061
llvm-svn: 358099
First step towards removing the MOVMSK intrinsics completely - this patch expands MOVMSK to the pattern:
e.g. PMOVMSKB(v16i8 x):
%cmp = icmp slt <16 x i8> %x, zeroinitializer
%int = bitcast <16 x i8> %cmp to i16
%res = zext i16 %int to i32
Which is correctly handled by ISel and FastIsel (give or take an annoying movzx move....): https://godbolt.org/z/rkrSFW
Differential Revision: https://reviews.llvm.org/D60256
llvm-svn: 357909
If we know we're not storing a lane, we don't need to compute the lane. This could be improved by using the undef element result to further prune the mask, but I want to separate that into its own change since it's relatively likely to expose other problems.
Differential Revision: https://reviews.llvm.org/D57247
llvm-svn: 356590
Follow-up to:
rL356338
rL356369
We can calculate an arbitrary vector constant minus the bitwidth, so there's
no need to limit this transform to scalars and splats.
llvm-svn: 356372
Follow-up to:
rL356338
Rotates are a special case of funnel shift where the 2 input operands
are the same value, but that does not need to be a restriction for the
canonicalization when the shift amount is a constant.
llvm-svn: 356369
This was noted as a backend problem:
https://bugs.llvm.org/show_bug.cgi?id=41057
...and subsequently fixed for x86:
rL356121
But we should canonicalize these in IR for the benefit of all targets
and improve IR analysis such as CSE.
llvm-svn: 356338
A change of two parts:
1) A generic enhancement for all callers of SDVE to exploit the fact that if all lanes are undef, the result is undef.
2) A GEP specific piece to strengthen/fix the vector index undef element handling, and call into the generic infrastructure when visiting the GEP.
The result is that we replace a vector gep with at least one undef in each lane with a undef. We can also do the same for vector intrinsics. Once the masked.load patch (D57372) has landed, I'll update to include call tests as well.
Differential Revision: https://reviews.llvm.org/D57468
llvm-svn: 356293
The shift argument is defined to be modulo the bitwidth, so if that argument
is a constant, we can always reduce the constant to its minimal form to allow
better CSE and other follow-on transforms.
We need to be careful to ignore constant expressions here, or we will likely
infinite loop. I'm adding a general vector constant query for that case.
Differential Revision: https://reviews.llvm.org/D59374
llvm-svn: 356192
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
An unused variable problem was introduced with rL352870
and stubbed out with rL352871, but we can make a better
fix by actually using the local variable in code rather
than just the assert.
llvm-svn: 352873
If we can reduce the x86-specific intrinsic to the generic op, it allows existing
simplifications and value tracking folds. AFAICT, this always results in identical
x86 codegen in the non-reduced case...which should be true because we semi-generically
(too aggressively IMO) convert to llvm.uadd.with.overflow in CGP, so the DAG/isel must
already combine/lower this intrinsic as expected.
This isn't quite what was requested in:
https://bugs.llvm.org/show_bug.cgi?id=40486
...but we want to have these kinds of folds early for efficiency and to enable greater
simplifications. For the case in the bug report where we have:
_addcarry_u64(0, ahi, 0, &ahi)
...this gets completely simplified away in IR.
Differential Revision: https://reviews.llvm.org/D57453
llvm-svn: 352870
This is meant to be used with clang's __builtin_dynamic_object_size.
When 'true' is passed to this parameter, the intrinsic has the
potential to be folded into instructions that will be evaluated
at run time. When 'false', the objectsize intrinsic behaviour is
unchanged.
rdar://32212419
Differential revision: https://reviews.llvm.org/D56761
llvm-svn: 352664
The point is that this simplifies integration of new intrinsics into SimplifiedDemandedVectorElts, and ensures we don't miss any existing ones.
This is intended to be NFC-ish, but as seen from the diffs, can produce slightly different output. This is due to order of transforms w/in instcombine resulting in two slightly different fixed points. That's something we should fix, but isn't a problem w/this patch per se.
Differential Revision: https://reviews.llvm.org/D57398
llvm-svn: 352653
This causes a couple of changes in the upgrade tests as signed/unsigned eq/ne are equivalent and we constant fold true/false codes, these changes are the same as what we already do for avx512 cmp/ucmp.
Noticed while cleaning up vector integer comparison costs for PR40376.
llvm-svn: 351697
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
InstCombine is able to transform mem transfer instrinsic to alone store or store/load pair.
It might result in generation of unaligned atomic load/store which later in backend
will be transformed to libcall. It is not an evident gain and it is better to keep intrinsic as is
and handle it at backend.
Reviewers: reames, anna, apilipenko, mkazantsev
Reviewed By: reames
Subscribers: t.p.northover, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D56582
llvm-svn: 351295
Summary:
This allows moving the condition from the intrinsic to the standard ICmp
opcode, so that LLVM can do simplifications on it. The icmp.i1 intrinsic
is an identity for retrieving the SGPR mask.
And we can also get the mask from and i1, or i1, xor i1.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52060
llvm-svn: 351150
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
Tyker