When tracking defined lanes through phi nodes in the live range
graph each branch of the phi must be handled independently.
Also rewrite the marking algorithm to reduce unnecessary
operations.
Previously a shared set of defined lanes was used which caused
marking to stop prematurely. This was observable in existing lit
tests, but test patterns did not cover this detail.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D98614
* Add amdgcn_strict_wqm intrinsic.
* Add a corresponding STRICT_WQM machine instruction.
* The semantic is similar to amdgcn_strict_wwm with a notable difference that not all threads will be forcibly enabled during the computations of the intrinsic's argument, but only all threads in quads that have at least one thread active.
* The difference between amdgc_wqm and amdgcn_strict_wqm, is that in the strict mode an inactive lane will always be enabled irrespective of control flow decisions.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96258
* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
Move implementation of kill intrinsics to WQM pass. Add live lane
tracking by updating a stored exec mask when lanes are killed.
Use live lane tracking to enable early termination of shader
at any point in control flow.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D94746
Exec mask manipulation inserted by SIWholeQuadMode barriers to
instruction scheduling. Move the entire pass after the machine
instruction scheduler and make changes so pass is correct for
non-SSA operation. These changes should leave the pass still
usable pre-scheduler, although tests have be updated to reflect
post-scheduler results.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D88081
This reverts commit c3492a1aa1.
I think this is the wrong strategy and wrong place to do this
transform anyway. Also reverts follow up commit
7d593d0d69.
- Need to lower COPY from SGPR to VGPR to a real instruction as the
standard COPY is used where the source and destination are from the
same register bank so that we potentially coalesc them together and
save one COPY. Considering that, backend optimizations, such as CSE,
won't handle them. However, the copy from SGPR to VGPR always needs
materializing to a native instruction, it should be lowered into a
real one before other backend optimizations.
Differential Revision: https://reviews.llvm.org/D87556
Add handling of s_andn2 and mask of 0.
This eliminates redundant instructions from uniform control flow.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D83641
Add the scratch wave offset to the scratch buffer descriptor (SRSrc) in
the entry function prologue. This allows us to removes the scratch wave
offset register from the calling convention ABI.
As part of this change, allow the use of an inline constant zero for the
SOffset of MUBUF instructions accessing the stack in entry functions
when a frame pointer is not requested/required. Entry functions with
calls still need to set up the calling convention ABI stack pointer
register, and reference it in order to address arguments of called
functions. The ABI stack pointer register remains unswizzled, but is now
wave-relative instead of queue-relative.
Non-entry functions also use an inline constant zero SOffset for
wave-relative scratch access, but continue to use the stack and frame
pointers as before. When the stack or frame pointer is converted to a
swizzled offset it is now scaled directly, as the scratch wave offset no
longer needs to be subtracted first.
Update llvm/docs/AMDGPUUsage.rst to reflect these changes to the calling
convention.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75138
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
Summary:
- SI Whole Quad Mode phase is replacing WQM pseudo instructions with v_mov instructions.
While this is necessary for the special handling of moving results out of WWM live ranges,
it is not necessary for WQM live ranges. The result is a v_mov from a register to itself after every
WQM operation. This change uses a COPY psuedo in these cases, which allows the register
allocator to coalesce the moves away.
Reviewers: tpr, dstuttard, foad, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71386
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 369664
It caused assertions to fire when building Chromium:
lib/CodeGen/LiveDebugValues.cpp:331: bool
{anonymous}::LiveDebugValues::OpenRangesSet::empty() const: Assertion
`Vars.empty() == VarLocs.empty() && "open ranges are inconsistent"' failed.
See https://crbug.com/992871#c3 for how to reproduce.
> Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
>
> To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
>
> Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 368579
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 368339
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
Summary: This fixes a large Dawn of War 3 performance regression with RADV from Mesa 19.0 to master which was caused by creating less code in some branches.
Reviewers: arsen, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60824
llvm-svn: 358592
Summary:
I encountered some problems with SIFixWWMLiveness when WWM is in a loop:
1. It sometimes gave invalid MIR where there is some control flow path
to the new implicit use of a register on EXIT_WWM that does not pass
through any def.
2. There were lots of false positives of registers that needed to have
an implicit use added to EXIT_WWM.
3. Adding an implicit use to EXIT_WWM (and adding an implicit def just
before the WWM code, which I tried in order to fix (1)) caused lots
of the values to be spilled and reloaded unnecessarily.
This commit is a rework of SIFixWWMLiveness, with the following changes:
1. Instead of considering any register with a def that can reach the WWM
code and a def that can be reached from the WWM code, it now
considers three specific cases that need to be handled.
2. A register that needs liveness over WWM to be synthesized now has it
done by adding itself as an implicit use to defs other than the
dominant one.
Also added the following fixmes:
FIXME: We should detect whether a register in one of the above
categories is already live at the WWM code before deciding to add the
implicit uses to synthesize its liveness.
FIXME: I believe this whole scheme may be flawed due to the possibility
of the register allocator doing live interval splitting.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46756
Change-Id: Ie7fba0ede0378849181df3f1a9a7a39ed1a94a94
llvm-svn: 338783
Summary:
Also explicitly port over some tests in llvm.amdgcn.image.* that were
missing. Some tests are removed because they no longer apply (i.e.
explicitly testing building an address vector via insertelement).
This is in preparation for the eventual removal of the old-style
intrinsics.
Some additional notes:
- constant-address-space-32bit.ll: change some GCN-NEXT to GCN because
the instruction schedule was subtly altered
- insert_vector_elt.ll: the old test didn't actually test anything,
because %tmp1 was not used; remove the load, because it doesn't work
(Because of the amdgpu_ps calling convention? In any case, it's
orthogonal to what the test claims to be testing.)
Change-Id: Idfa99b6512ad139e755e82b8b89548ab08f0afcf
Reviewers: arsenm, rampitec
Subscribers: MatzeB, qcolombet, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D48018
llvm-svn: 335229
Summary:
For a block with WQM on entry and exit and containing no exact mode
code, but containing some WWM code, the WQM pass forgot to process the
block at all and so did not insert code to enter and leave WWM.
This commit fixes that.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47027
Change-Id: I044792eead1293bed4203fb26ce75f47878afeb6
llvm-svn: 333362
The pre-RA scheduler does load/store clustering, but post-RA
scheduler undoes it. Add mutation to prevent it.
Differential Revision: https://reviews.llvm.org/D38014
llvm-svn: 313670
A mrt exp with vm=1 must be in exact (non-WQM) mode, as it also exports
the exec mask as the valid mask to determine which pixels to render.
This commit marks any exp as needing to be in exact mode.
Actually, if there are multiple mrt exps, only one needs to have vm=1,
and only that one needs to be in exact mode. But that is an optimization
for another day.
Differential Revision: https://reviews.llvm.org/D36305
llvm-svn: 312915
Summary:
This intrinsic lets us set inactive lanes to an identity value when
implementing wavefront reductions. In combination with Whole Wavefront
Mode, it lets inactive lanes be skipped over as required by GLSL/Vulkan.
Lowering the intrinsic needs to happen post-RA so that RA knows that the
destination isn't completely overwritten due to the EXEC shenanigans, so
we need another pseudo-instruction to represent the un-lowered
intrinsic.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34719
llvm-svn: 310088
Summary:
Whole Wavefront Wode (WWM) is similar to WQM, except that all of the
lanes are always enabled, regardless of control flow. This is required
for implementing wavefront reductions in non-uniform control flow, where
we need to use the inactive lanes to propagate intermediate results, so
they need to be enabled. We need to propagate WWM to uses (unless
they're explicitly marked as exact) so that they also propagate
intermediate results correctly. We do the analysis and exec mask munging
during the WQM pass, since there are interactions with WQM for things
that require both WQM and WWM. For simplicity, WWM is entirely
block-local -- blocks are never WWM on entry or exit of a block, and WWM
is not propagated to the block level. This means that computations
involving WWM cannot involve control flow, but we only ever plan to use
WWM for a few limited purposes (none of which involve control flow)
anyways.
Shaders can ask for WWM using the @llvm.amdgcn.wwm intrinsic. There
isn't yet a way to turn WWM off -- that will be added in a future
change.
Finally, it turns out that turning on inactive lanes causes a number of
problems with register allocation. While the best long-term solution
seems like teaching LLVM's register allocator about predication, for now
we need to add some hacks to prevent ourselves from getting into trouble
due to constraints that aren't currently expressed in LLVM. For the gory
details, see the comments at the top of SIFixWWMLiveness.cpp.
Reviewers: arsenm, nhaehnle, tpr
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D35524
llvm-svn: 310087
Summary:
Previously, we assumed that certain types of instructions needed WQM in
pixel shaders, particularly DS instructions and image sampling
instructions. This was ok because with OpenGL, the assumption was
correct. But we want to start using DPP instructions for derivatives as
well as other things, so the assumption that we can infer whether to use
WQM based on the instruction won't continue to hold. This intrinsic lets
frontends like Mesa indicate what things need WQM based on their
knowledge of the API, rather than second-guessing them in the backend.
We need to keep around the old method of enabling WQM, but eventually we
should remove it once Mesa catches up. For now, this will let us use DPP
instructions for computing derivatives correctly.
Reviewers: arsenm, tpr, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D35167
llvm-svn: 310085
An encoding does not allow to use SDWA in an instruction with
scalar operands, either literals or SGPRs. That is however possible
to copy these operands into a VGPR first.
Several copies of the value are produced if multiple SDWA conversions
were done. To cleanup MachineLICM (to hoist copies out of loops),
MachineCSE (to remove duplicate copies) and SIFoldOperands (to replace
SGPR to VGPR copy with immediate copy right to the VGPR) runs are added
after the SDWA pass.
Differential Revision: https://reviews.llvm.org/D33583
llvm-svn: 304219
This allows us to ensure that 0 is never a valid pointer
to a user object, and ensures that the offset is always legal
without needing a register to access it. This comes at the cost
of usable offsets and wasted stack space.
llvm-svn: 295877
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
It's possible to have a use of the private resource descriptor or
scratch wave offset registers even though there are no allocated
stack objects. This would result in continuing to use the maximum
number reserved registers. This could go over the number of SGPRs
available on VI, or violate the SGPR limit requested by
the function attributes.
llvm-svn: 285435
Summary:
This contains two changes that reduce the time spent in WQM, with the
intention of reducing bandwidth required by VMEM loads:
1. Sampling instructions by themselves don't need to run in WQM, only their
coordinate inputs need it (unless of course there is a dependent sampling
instruction). The initial scanInstructions step is modified accordingly.
2. When switching back from WQM to Exact, switch back as soon as possible.
This affects the logic in processBlock.
This should always be a win or at best neutral.
There are also some cleanups (e.g. remove unused ExecExports) and some new
debugging output.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D22092
llvm-svn: 280590
Carl Ritson