This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
This test was disabled despite the instruction having been implemented for a
long time. This commit just enables the test.
Differential Revision: https://reviews.llvm.org/D100345
In the final SIMD spec, there is only a single v128.any_true instruction, rather
than one for each lane interpretation because the semantics do not depend on the
lane interpretation.
Differential Revision: https://reviews.llvm.org/D100241
Removes the prototype builtin and intrinsic for i64x2.eq and implements that
instruction as well as the other i64x2 comparison instructions in the final SIMD
spec. Unsigned comparisons were not included in the final spec, so they still
need to be scalarized via a custom lowering.
Differential Revision: https://reviews.llvm.org/D99623
When I updated the SIMD opcodes in f5764a8654, I accidentally missed updating
i8x16.popcnt. This patch fixes the omission.
Differential Revision: https://reviews.llvm.org/D99536
Updates the names (e.g. widen => extend, saturate => sat) and opcodes of all
SIMD instructions to match the finalized SIMD spec. Deliberately does not change
the public interface in wasm_simd128.h yet; that will require more care.
Depends on D98466.
Differential Revision: https://reviews.llvm.org/D98676
Removes the instruction definitions, intrinsics, and builtins for qfma/qfms,
signselect, and prefetch instructions, which were not included in the final
WebAssembly SIMD spec.
Depends on D98457.
Differential Revision: https://reviews.llvm.org/D98466
Now that the WebAssembly SIMD specification is finalized and engines are
generally up-to-date, there is no need for a separate target feature for gating
SIMD instructions that engines have not implemented. With this change,
v128.const is now enabled by default with the simd128 target feature.
Differential Revision: https://reviews.llvm.org/D98457
As proposed in https://github.com/WebAssembly/simd/pull/380. This commit makes
the new instructions available only via clang builtins and LLVM intrinsics to
make their use opt-in while they are still being evaluated for inclusion in the
SIMD proposal.
Depends on D93771.
Differential Revision: https://reviews.llvm.org/D93775
As proposed in https://github.com/WebAssembly/simd/pull/376. This commit
implements new builtin functions and intrinsics for these instructions, but does
not yet add them to wasm_simd128.h because they have not yet been merged to the
proposal. These are the first instructions with opcodes greater than 0xff, so
this commit updates the MC layer and disassembler to handle that correctly.
Differential Revision: https://reviews.llvm.org/D90253
Prototype the newly proposed load_lane instructions, as specified in
https://github.com/WebAssembly/simd/pull/350. Since these instructions are not
available to origin trial users on Chrome stable, make them opt-in by only
selecting them from intrinsics rather than normal ISel patterns. Since we only
need rough prototypes to measure performance right now, this commit does not
implement all the load and store patterns that would be necessary to make full
use of the offset immediate. However, the full suite of offset tests is included
to make it easy to track improvements in the future.
Since these are the first instructions to have a memarg immediate as well as an
additional immediate, the disassembler needed some additional hacks to be able
to parse them correctly. Making that code more principled is left as future
work.
Differential Revision: https://reviews.llvm.org/D89366
Specified in https://github.com/WebAssembly/simd/pull/237, these
instructions load the first vector lane from memory and zero the other
lanes. Since these instructions are not officially part of the SIMD
proposal, they are only available on an opt-in basis via LLVM
intrinsics and clang builtin functions. If these instructions are
merged to the proposal, this implementation will change so that the
instructions will be generated from normal IR. At that point the
intrinsics and builtin functions would be removed.
This PR also changes the opcodes for the experimental f32x4.qfm{a,s}
instructions because their opcodes conflicted with those of the
v128.load{32,64}_zero instructions. The new opcodes were chosen to
match those used in V8.
Differential Revision: https://reviews.llvm.org/D84820
Summary:
As specified in https://github.com/WebAssembly/simd/pull/232. These
instructions are implemented as LLVM intrinsics for now rather than
normal ISel patterns to make these instructions opt-in. Once the
instructions are merged to the spec proposal, the intrinsics will be
replaced with proper ISel patterns.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D81222
Summary:
This reflects changes in the spec proposal made since basic arithmetic
was first implemented.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80174
Summary:
As proposed in https://github.com/WebAssembly/simd/pull/122. Since
these instructions are not yet merged to the SIMD spec proposal, this
patch makes them entirely opt-in by surfacing them only through LLVM
intrinsics and clang builtins. If these instructions are made
official, these intrinsics and builtins should be replaced with simple
instruction patterns.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D79742
Summary:
As described in https://github.com/WebAssembly/simd/pull/209. This is
the final reorganization of the SIMD opcode space before
standardization. It has been landed in concert with corresponding
changes in other projects in the WebAssembly SIMD ecosystem.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79224
Summary:
These were merged to the SIMD proposal in
https://github.com/WebAssembly/simd/pull/128.
Depends on D76397 to avoid merge conflicts.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76399
Summary:
These instructions were added to the spec proposal in
https://github.com/WebAssembly/simd/pull/126. Their semantics are
equivalent to `(a + b + 1) / 2`. The opcode for the experimental
i32x4.dot_i16x8_s is also bumped due to a collision with the
i8x16.avgr_u opcode.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71628
Summary:
This instruction is not merged to the spec proposal, but we need it to
be implemented in the toolchain to experiment with it. It is available
only on an opt-in basis through a clang builtin.
Defined in https://github.com/WebAssembly/simd/pull/127.
Depends on D69696.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69697
Summary:
Introduces a clang builtins and LLVM intrinsics representing integer
min/max instructions. These instructions have not been merged to the
SIMD spec proposal yet, so they are currently opt-in only via builtins
and not produced by general pattern matching. If these instructions
are accepted into the spec proposal the builtins and intrinsics will
be replaced with normal pattern matching.
Defined in https://github.com/WebAssembly/simd/pull/27.
Reviewers: aheejin
Reviewed By: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69696
Summary:
Adds the new v8x16.swizzle SIMD instruction as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#swizzling-using-variable-indices.
In addition to adding swizzles as a candidate lowering in
LowerBUILD_VECTOR, also rewrites and simplifies the lowering to
minimize the number of replace_lanes necessary rather than trying to
minimize code size. This leads to more uses of v128.const instead of
splats, which is expected to increase performance.
The new code will be easier to tune once V8 implements all the vector
construction operations, and it will also be easier to add new
candidate instructions in the future if necessary.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68527
llvm-svn: 374188
Summary:
Adds the new load_splat instructions as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#load-and-splat.
DAGISel does not allow matching multiple copies of the same load in a
single pattern, so we use a new node in WebAssemblyISD to wrap loads
that should be splatted.
Depends on D67783.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67784
llvm-svn: 372655
Summary:
Adds clang builtins and LLVM intrinsics for these experimental
instructions. They are not implemented in engines yet, but that is ok
because the user must opt into using them by calling the builtins.
Reviewers: aheejin, dschuff
Reviewed By: aheejin
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67020
llvm-svn: 370556
Summary:
- Match the syntax output by InstPrinter.
- Fix it always emitting 0 for align. Had to work around fact that
opcode is not available for GetDefaultP2Align while parsing.
- Updated tests that were erroneously happy with a p2align=0
Fixes https://bugs.llvm.org/show_bug.cgi?id=40752
Reviewers: aheejin, sbc100
Subscribers: jgravelle-google, sunfish, jfb, llvm-commits, dschuff
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63633
llvm-svn: 364570
Summary:
This is a third attempt, but this time we have vetted it on Windows
first. The previous errors were due to an uninitialized class member.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D56560
llvm-svn: 350901
This is a second attempt at r350778, which was reverted in
r350789. The only change is that the unimplemented-simd128 feature has
been renamed simd128-unimplemented, since naming it
unimplemented-simd128 somehow made the simd128 feature flag enable the
unimplemented-simd128 feature on Windows.
llvm-svn: 350791
Summary:
This replaces the old ad-hoc -wasm-enable-unimplemented-simd
flag. Also makes the new unimplemented-simd128 feature imply the
simd128 feature.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D56501
llvm-svn: 350778
Summary:
It does so using a simple nesting stack, and gives clear errors upon
violation. This is unique to wasm, since most CPUs do not have
any nested constructs.
Had to add an end of file check to the general assembler for this.
Note: if/else/end instructions are not currently supported in our
tablegen defs, so these tests will be enabled in a follow-up.
They already pass the nesting check.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55797
llvm-svn: 350078
Wouter van Oortmerssen