The verifier of the llvm.call operation was not checking for mismatches between
the number of operation results and the number of results in the signature of
the callee. Furthermore, it was possible to construct an llvm.call operation
producing an SSA value of !llvm.void type, which should not exist. Add the
verification and treat !llvm.void result type as absence of call results.
Update the GPU conversions to LLVM that were mistakenly assuming that it was
fine for llvm.call to produce values of !llvm.void type and ensure these calls
do not produce results.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D106937
In particular for Graph Regions, the terminator needs is just a
historical artifact of the generalization of MLIR from CFG region.
Operations like Module don't need a terminator, and before Module
migrated to be an operation with region there wasn't any needed.
To validate the feature, the ModuleOp is migrated to use this trait and
the ModuleTerminator operation is deleted.
This patch is likely to break clients, if you're in this case:
- you may iterate on a ModuleOp with `getBody()->without_terminator()`,
the solution is simple: just remove the ->without_terminator!
- you created a builder with `Builder::atBlockTerminator(module_body)`,
just use `Builder::atBlockEnd(module_body)` instead.
- you were handling ModuleTerminator: it isn't needed anymore.
- for generic code, a `Block::mayNotHaveTerminator()` may be used.
Differential Revision: https://reviews.llvm.org/D98468
Continue the convergence between LLVM dialect and built-in types by replacing
the bfloat, half, float and double LLVM dialect types with their built-in
counterparts. At the API level, this is a direct replacement. At the syntax
level, we change the keywords to `bf16`, `f16`, `f32` and `f64`, respectively,
to be compatible with the built-in type syntax. The old keywords can still be
parsed but produce a deprecation warning and will be eventually removed.
Depends On D94178
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94179
The LLVM dialect type system has been closed until now, i.e. did not support
types from other dialects inside containers. While this has had obvious
benefits of deriving from a common base class, it has led to some simple types
being almost identical with the built-in types, namely integer and floating
point types. This in turn has led to a lot of larger-scale complexity: simple
types must still be converted, numerous operations that correspond to LLVM IR
intrinsics are replicated to produce versions operating on either LLVM dialect
or built-in types leading to quasi-duplicate dialects, lowering to the LLVM
dialect is essentially required to be one-shot because of type conversion, etc.
In this light, it is reasonable to trade off some local complexity in the
internal implementation of LLVM dialect types for removing larger-scale system
complexity. Previous commits to the LLVM dialect type system have adapted the
API to support types from other dialects.
Replace LLVMIntegerType with the built-in IntegerType plus additional checks
that such types are signless (these are isolated in a utility function that
replaced `isa<LLVMType>` and in the parser). Temporarily keep the possibility
to parse `!llvm.i32` as a synonym for `i32`, but add a deprecation notice.
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94178
BEGIN_PUBLIC
[mlir] Remove LLVMType, LLVM dialect types now derive Type directly
This class has become a simple `isa` hook with no proper functionality.
Removing will allow us to eventually make the LLVM dialect type infrastructure
open, i.e., support non-LLVM types inside container types, which itself will
make the type conversion more progressive.
Introduce a call `LLVM::isCompatibleType` to be used instead of
`isa<LLVMType>`. For now, this is strictly equivalent.
END_PUBLIC
Depends On D93681
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93713
LLVMType contains numerous static constructors that were initially introduced
for API compatibility with LLVM. Most of these merely forward to arguments to
`SpecificType::get` (MLIR defines classes for all types, unlike LLVM IR), while
some introduce subtle semantics differences due to different modeling of MLIR
types (e.g., structs are not auto-renamed in case of conflicts). Furthermore,
these constructors don't match MLIR idioms and actively prevent us from making
the LLVM dialect type system more open. Remove them and use `SpecificType::get`
instead.
Depends On D93680
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93681
LLVMType contains multiple instance methods that were introduced initially for
compatibility with LLVM API. These methods boil down to `cast` followed by
type-specific call. Arguably, they are mostly used in an LLVM cast-follows-isa
anti-pattern. This doesn't connect nicely to the rest of the MLIR
infrastructure and actively prevents it from making the LLVM dialect type
system more open, e.g., reusing built-in types when appropriate. Remove such
instance methods and replaces their uses with apporpriate casts and methods on
derived classes. In some cases, the result may look slightly more verbose, but
most cases should actually use a stricter subtype of LLVMType anyway and avoid
the isa/cast.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93680
These includes have been deprecated in favor of BuiltinDialect.h, which contains the definitions of ModuleOp and FuncOp.
Differential Revision: https://reviews.llvm.org/D91572
- Use TypeRange instead of ArrayRef<Type> where possible.
- Change some of the custom builders to also use TypeRange
Differential Revision: https://reviews.llvm.org/D87944
Binding MemRefs of f16 needs special handling as the type is not supported on
CPU. There was a bug in the type used.
Differential Revision: https://reviews.llvm.org/D86328
Historical modeling of the LLVM dialect types had been wrapping LLVM IR types
and therefore needed access to the instance of LLVMContext stored in the
LLVMDialect. The new modeling does not rely on that and only needs the
MLIRContext that is used for uniquing, similarly to other MLIR types. Change
LLVMType::get<Kind>Ty functions to take `MLIRContext *` instead of
`LLVMDialect *` as first argument. This brings the code base closer to
completely removing the dependence on LLVMContext from the LLVMDialect,
together with additional support for thread-safety of its use.
Depends On D85371
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85372
This prepares for the removal of llvm::Module and LLVMContext from the
mlir::LLVMDialect.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85371
Summary:
Workgroup size is written into the kernel. So to properly modelling
vulkan launch, we have to skip local workgroup size for vulkan launch
call op.
Differential Revision: https://reviews.llvm.org/D78307
Summary:
This is much cleaner, and fits the same structure as many other tablegen backends. This was not done originally as the CRTP in the pass classes made it overly verbose/complex.
Differential Revision: https://reviews.llvm.org/D77367
This revision removes all of the CRTP from the pass hierarchy in preparation for using the tablegen backend instead. This creates a much cleaner interface in the C++ code, and naturally fits with the rest of the infrastructure. A new utility class, PassWrapper, is added to replicate the existing behavior for passes not suitable for using the tablegen backend.
Differential Revision: https://reviews.llvm.org/D77350
ModulePass doesn't provide any special utilities and thus doesn't give enough benefit to warrant a special pass class. This revision replaces all usages with the more general OperationPass.
Differential Revision: https://reviews.llvm.org/D77339
This revision adds support for generating utilities for passes such as options/statistics/etc. that can be inferred from the tablegen definition. This removes additional boilerplate from the pass, and also makes it easier to remove the reliance on the pass registry to provide certain things(e.g. the pass argument).
Differential Revision: https://reviews.llvm.org/D76659
This removes the need to statically register conversion passes, and also puts all of the conversions within one centralized file.
Differential Revision: https://reviews.llvm.org/D76658
A memref argument is converted into a pointer-to-struct argument
of type `{T*, T*, i64, i64[N], i64[N]}*` in the wrapper function,
where T is the converted element type and N is the memref rank.
Differential Revision: https://reviews.llvm.org/D76059
* Adds GpuLaunchFuncToVulkanLaunchFunc conversion pass.
* Moves a serialization of the `spirv::Module` from LaunchFuncToVulkanCalls pass to newly created pass.
* Updates LaunchFuncToVulkanCalls instrumentation pass, adds `initVulkan` and `deinitVulkan` runtime calls.
* Adds `bindResource` call to bind specifc resource by the given descriptor set and descriptor binding.
* Eliminates static construction and desctruction of `VulkanRuntimeManager`.
Differential Revision: https://reviews.llvm.org/D75192
Summary:
NFC - Moved StandardOps/Ops.h to a StandardOps/IR dir to better match surrounding
directories. This is to match other dialects, and prepare for moving StandardOps
related transforms in out for Transforms and into StandardOps/Transforms.
Differential Revision: https://reviews.llvm.org/D74940
Add an initial version of mlir-vulkan-runner execution driver.
A command line utility that executes a MLIR file on the Vulkan by
translating MLIR GPU module to SPIR-V and host part to LLVM IR before
JIT-compiling and executing the latter.
Differential Revision: https://reviews.llvm.org/D72696
Implement a pass to convert gpu.launch_func op into a sequence of
Vulkan runtime calls. The Vulkan runtime API surface is huge so currently we
don't expose separate external functions in IR for each of them, instead we
expose a few external functions to wrapper libraries which manages
Vulkan runtime.
Differential Revision: https://reviews.llvm.org/D74549
Alex Zinenko