The verifier of the llvm.call operation was not checking for mismatches between
the number of operation results and the number of results in the signature of
the callee. Furthermore, it was possible to construct an llvm.call operation
producing an SSA value of !llvm.void type, which should not exist. Add the
verification and treat !llvm.void result type as absence of call results.
Update the GPU conversions to LLVM that were mistakenly assuming that it was
fine for llvm.call to produce values of !llvm.void type and ensure these calls
do not produce results.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D106937
The dialect-specific cast between builtin (ex-standard) types and LLVM
dialect types was introduced long time before built-in support for
unrealized_conversion_cast. It has a similar purpose, but is restricted
to compatible builtin and LLVM dialect types, which may hamper
progressive lowering and composition with types from other dialects.
Replace llvm.mlir.cast with unrealized_conversion_cast, and drop the
operation that became unnecessary.
Also make unrealized_conversion_cast legal by default in
LLVMConversionTarget as the majority of convesions using it are partial
conversions that actually want the casts to persist in the IR. The
standard-to-llvm conversion, which is still expected to run last, cleans
up the remaining casts standard-to-llvm conversion, which is still
expected to run last, cleans up the remaining casts
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D105880
This may be necessary in partial multi-stage conversion when a container type
from dialect A containing types from dialect B goes through the conversion
where only dialect A is converted to the LLVM dialect. We will need to keep a
pointer-to-non-LLVM type in the IR until a further conversion can convert
dialect B types to LLVM types.
Reviewed By: wsmoses
Differential Revision: https://reviews.llvm.org/D106076
This was missing and also there was a bug in the lowering itself, which went unnoticed due to it.
Differential Revision: https://reviews.llvm.org/D105122
* Previously, we were only generating .h.inc files. We foresee the need to also generate implementations and this is a step towards that.
* Discussed in https://llvm.discourse.group/t/generating-cpp-inc-files-for-dialects/3732/2
* Deviates from the discussion above by generating a default constructor in the .cpp.inc file (and adding a tablegen bit that disables this in case if this is user provided).
* Generating the destructor started as a way to flush out the missing includes (produces a link error), but it is a strict improvement on its own that is worth doing (i.e. by emitting key methods in the .cpp file, we root vtables in one translation unit, which is a non-controversial improvement).
Differential Revision: https://reviews.llvm.org/D105070
This patch brings support for setting runtime preemption specifiers of
LLVM's GlobalValues. In LLVM semantics, if the `dso_local` attribute
is not explicitly requested, then it is inferred based on linkage and
visibility. We model this same behavior with a UnitAttribute: if it is
present, then we explicitly request the GlobalValue to marked as
`dso_local`, otherwise we rely on the GlobalValue itself to make this
decision.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D104983
This brings us closer to replacing the LLVM data layout string with a
first-class layout modeling in MLIR.
Depends On D103945
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D103946
These `arm_sve.cmp` functions are needed to generate scalable vector
masks as long as scalable vectors are not part of the standard types.
Once in standard, these can be removed and `std.cmp` can be used
instead.
Differential Revision: https://reviews.llvm.org/D103473
These `arm_sve.cmp` functions are needed to generate scalable vector
masks as long as scalable vectors are not part of the standard types.
Once in standard, these can be removed and `std.cmp` can be used
instead.
Differential Revision: https://reviews.llvm.org/D103473
First step in adding alignment as an attribute to MLIR global definitions. Alignment can be specified for global objects in LLVM IR. It can also be specified as a named attribute in the LLVMIR dialect of MLIR. However, this attribute has no standing and is discarded during translation from MLIR to LLVM IR. This patch does two things: First, it adds the attribute to the syntax of the llvm.mlir.global operation, and by doing this it also adds accessors and verifications. The syntax is "align=XX" (with XX being an integer), placed right after the value of the operation. Second, it allows transforming this operation to and from LLVM IR. It is checked whether the value is an integer power of 2.
Reviewed By: ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D101492
The current design uses a unique entry for each argument/result attribute, with the name of the entry being something like "arg0". This provides for a somewhat sparse design, but ends up being much more expensive (from a runtime perspective) in-practice. The design requires building a string every time we lookup the dictionary for a specific arg/result, and also requires N attribute lookups when collecting all of the arg/result attribute dictionaries.
This revision restructures the design to instead have an ArrayAttr that contains all of the attribute dictionaries for arguments and another for results. This design reduces the number of attribute name lookups to 1, and allows for O(1) lookup for individual element dictionaries. The major downside is that we can end up with larger memory usage, as the ArrayAttr contains an entry for each element even if that element has no attributes. If the memory usage becomes too problematic, we can experiment with a more sparse structure that still provides a lot of the wins in this revision.
This dropped the compilation time of a somewhat large TensorFlow model from ~650 seconds to ~400 seconds.
Differential Revision: https://reviews.llvm.org/D102035
This patch add the UnnamedAddr attribute for the GlobalOp in the LLVM
dialect. The attribute is also handled to and from LLVM IR.
This is meant to be used in a follow up patch to lower OpenACC/OpenMP ops to
call to kmp and tgt runtime calls (D100678).
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D100677
ArmSVE dialect is behind the recent changes in how the Vector dialect
interacts with backend vector dialects and the MLIR -> LLVM IR
translation module. This patch cleans up ArmSVE initialization within
Vector and removes the need for an LLVMArmSVE dialect.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D100171
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
The dialect separation was introduced to demarkate ops operating in different
type systems. This is no longer the case after the LLVM dialect has migrated to
using built-in vector types, so the original reason for separation is no longer
valid. Squash the two dialects into one.
The code size decrease isn't quite large: the ops originally in LLVM_AVX512 are
preserved because they match LLVM IR intrinsics specialized for vector element
bitwidth. However, it is still conceptually beneficial to have only one
dialect. I originally considered to use Tablegen multiclasses to define both
the type-polymorphic op and its two intrinsic-related instantiations, but
decided against it given both the complexity of the required Tablegen input and
its dissimilarity with the rest of ODS-defined ops, both potentially resulting
in very poor maintainability.
Depends On D98327
Reviewed By: nicolasvasilache, springerm
Differential Revision: https://reviews.llvm.org/D98328
This allows the caller to distinguish between a parse error or an
unmatched keyword. It fixes the redundant error that was emitted by the
caller when the generated parser would fail.
Differential Revision: https://reviews.llvm.org/D98162
Instead of storing an array of LoopOpt attributes, which were just
wrapping std::pair<enum, int> anyway, we can have an attribute storing
a sorted ArrayRef<std::pair<enum, int>> as a single unit. This improves
here the textual format and the general API. Note that we're limiting
the options to fit into an int64_t by design, but this isn't a new
constraint.
Building the LoopOptions attribute is likely worth a specific builder
for efficient reason, that'll be the subject of a future patch.
Differential Revision: https://reviews.llvm.org/D98105
This is using the new Attribute storage generation support in
TableGen to define the LLVM FastMathFlags.
Differential Revision: https://reviews.llvm.org/D98007
The two dialects are largely redundant. The former was introduced as a mirror
of the latter operating on LLVM dialect types. This is no longer necessary
since the LLVM dialect operates on built-in types. Combine the two dialects.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98060
This function simplifies calling the getChecked methods on Attributes and Types from within the parser, and removes any need to use `getEncodedSourceLocation` for these methods (by using an SMLoc instead). This is much more efficient than using an mlir::Location, as the encoding process to produce an mlir::Location is inefficient and undesirable for parsing (locations used during parsing should not persist afterwards unless otherwise necessary).
Differential Revision: https://reviews.llvm.org/D97900
Add a Loop Option attribute and generate llvm metadata attached to
branch instructions to control code generation.
Reviewed By: ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96820
Just a pure method renaming.
It is a preparation step for replacing "memory space as raw integer"
with more generic "memory space as attribute", which will be done in
separate commit.
The `MemRefType::getMemorySpace` method will return `Attribute` and
become the main API, while `getMemorySpaceAsInt` will be declared as
deprecated and will be replaced in all in-tree dialects (also in separate
commits).
Reviewed By: mehdi_amini, rriddle
Differential Revision: https://reviews.llvm.org/D97476
`verifyConstructionInvariants` is intended to allow for verifying the invariants of an attribute/type on construction, and `getChecked` is intended to enable more graceful error handling aside from an assert. There are a few problems with the current implementation of these methods:
* `verifyConstructionInvariants` requires an mlir::Location for emitting errors, which is prohibitively costly in the situations that would most likely use them, e.g. the parser.
This creates an unfortunate code duplication between the verifier code and the parser code, given that the parser operates on llvm::SMLoc and it is an undesirable overhead to pre-emptively convert from that to an mlir::Location.
* `getChecked` effectively requires duplicating the definition of the `get` method, creating a quite clunky workflow due to the subtle different in its signature.
This revision aims to talk the above problems by refactoring the implementation to use a callback for error emission. Using a callback allows for deferring the costly part of error emission until it is actually necessary.
Due to the necessary signature change in each instance of these methods, this revision also takes this opportunity to cleanup the definition of these methods by:
* restructuring the signature of `getChecked` such that it can be generated from the same code block as the `get` method.
* renaming `verifyConstructionInvariants` to `verify` to match the naming scheme of the rest of the compiler.
Differential Revision: https://reviews.llvm.org/D97100
Verification of the LLVM IR produced when translating various MLIR dialects was
only active when calling the translation programmatically. This has led to
several cases of invalid LLVM IR being generated that could not be caught with
textual mlir-translate tests. Add verifiers for these cases and fix the tests
in preparation for enforcing the validation of LLVM IR.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96774
After the LLVM dialect types were ported to use built-in types, the parser kept
supporting the old syntax for LLVM dialect types to produce built-in types for
compatibility. Drop this support.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96275
Historically, the Vector to LLVM dialect conversion subsumed the Standard to
LLVM dialect conversion patterns. This was necessary because the conversion
infrastructure did not have sufficient support for reconciling type
conversions. This support is now available. Only keep the patterns related to
the Vector dialect in the Vector to LLVM conversion and require type casts
operations to be inserted if necessary. These casts will be removed by
following conversions if possible. Update integration tests to also run the
Standard to LLVM conversion.
There is a significant amount of test churn, which is due to (a) unnecessarily
strict tests in VectorToLLVM and (b) many patterns actually targeting Standard
dialect ops instead of LLVM dialect ops leading to tests actually exercising a
Vector->Standard->LLVM conversion. This churn is a good illustration of the
reason to make the conversion partial: now the tests only check the code in the
Vector to LLVM conversion and will not be randomly broken by changes in
Standard to LLVM conversion.
Arguably, it may be possible to extract Vector to Standard patterns into a
separate pass, but given the ongoing splitting of the Standard dialect, such
pass will be short-lived and will require further refactoring.
Depends On D95626
Reviewed By: nicolasvasilache, aartbik
Differential Revision: https://reviews.llvm.org/D95685
It is no longer necessary to also convert other "standard" ops along with the
complex dialect: the element types are now built-in integers or floating point
types, and the top-level cast between complex and struct is automatically
inserted and removed in progressive lowering.
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D95625
This corrects the last 2 issues caught by tests when causing dialect
conversion rollbacks to occur.
Differential Revision: https://reviews.llvm.org/D94623
Continue the convergence between LLVM dialect and built-in types by using the
built-in vector type whenever possible, that is for fixed vectors of built-in
integers and built-in floats. LLVM dialect vector type is still in use for
pointers, less frequent floating point types that do not have a built-in
equivalent, and scalable vectors. However, the top-level `LLVMVectorType` class
has been removed in favor of free functions capable of inspecting both built-in
and LLVM dialect vector types: `LLVM::getVectorElementType`,
`LLVM::getNumVectorElements` and `LLVM::getFixedVectorType`. Additional work is
necessary to design an implemented the extensions to built-in types so as to
remove the `LLVMFixedVectorType` entirely.
Note that the default output format for the built-in vectors does not have
whitespace around the `x` separator, e.g., `vector<4xf32>` as opposed to the
LLVM dialect vector type format that does, e.g., `!llvm.vec<4 x fp128>`. This
required changing the FileCheck patterns in several tests.
Reviewed By: mehdi_amini, silvas
Differential Revision: https://reviews.llvm.org/D94405
Continue the convergence between LLVM dialect and built-in types by replacing
the bfloat, half, float and double LLVM dialect types with their built-in
counterparts. At the API level, this is a direct replacement. At the syntax
level, we change the keywords to `bf16`, `f16`, `f32` and `f64`, respectively,
to be compatible with the built-in type syntax. The old keywords can still be
parsed but produce a deprecation warning and will be eventually removed.
Depends On D94178
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94179
The LLVM dialect type system has been closed until now, i.e. did not support
types from other dialects inside containers. While this has had obvious
benefits of deriving from a common base class, it has led to some simple types
being almost identical with the built-in types, namely integer and floating
point types. This in turn has led to a lot of larger-scale complexity: simple
types must still be converted, numerous operations that correspond to LLVM IR
intrinsics are replicated to produce versions operating on either LLVM dialect
or built-in types leading to quasi-duplicate dialects, lowering to the LLVM
dialect is essentially required to be one-shot because of type conversion, etc.
In this light, it is reasonable to trade off some local complexity in the
internal implementation of LLVM dialect types for removing larger-scale system
complexity. Previous commits to the LLVM dialect type system have adapted the
API to support types from other dialects.
Replace LLVMIntegerType with the built-in IntegerType plus additional checks
that such types are signless (these are isolated in a utility function that
replaced `isa<LLVMType>` and in the parser). Temporarily keep the possibility
to parse `!llvm.i32` as a synonym for `i32`, but add a deprecation notice.
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94178
Alex Zinenko