Summary:
Cast from a value interpreted as floating-point to the corresponding signed
integer value. Similar to an element-wise `static_cast` in C++, performs an
element-wise conversion operation.
Differential Revision: https://reviews.llvm.org/D79373
Summary:
This revision adds a conservative canonicalization pattern for MemRefCastOp that are typically inserted during ViewOp and SubViewOp canonicalization.
Ideally such canonicalizations would propagate the type to consumers but this is not a local behavior. As a consequence MemRefCastOp are introduced to keep type compatibility but need to be cleaned up later, in the case where more dynamic behavior than necessary is introduced.
Differential Revision: https://reviews.llvm.org/D79438
DMA operation classes in the Standard dialect (`DmaStartOp` and `DmaWaitOp`)
provide helper functions that make numerous assumptions about the number and
order of operands, and about their types. However, these assumptions were not
checked in the verifier, leading to assertion failures or crashes when helper
functions were used on ill-formed ops. Some of the assuptions were checked in
the custom parser (and thus could not check assumption violations in ops
constructed programmatically, e.g., during rewrites) and others were not
checked at all. Introduce the verifiers for all these assumptions and drop
unnecessary checks in the parser that are now covered by the verifier.
Addresses PR45560.
Differential Revision: https://reviews.llvm.org/D79408
This range allows for performing many different operations on successor operands, including erasing/adding/setting. This removes the need for the explicit canEraseSuccessorOperand and eraseSuccessorOperand methods.
Differential Revision: https://reviews.llvm.org/D79077
As we start defining more complex Ops, we increasingly see the need for
Ops-with-regions to be able to construct Ops within their regions in
their ::build methods. However, these methods only have access to
Builder, and not OpBuilder. Creating a local instance of OpBuilder
inside ::build and using it fails to trigger the operation creation
hooks in derived builders (e.g., ConversionPatternRewriter). In this
case, we risk breaking the logic of the derived builder. At the same
time, OpBuilder::create, which is by far the largest user of ::build
already passes "this" as the first argument, so an OpBuilder instance is
already available.
Update all ::build methods in all Ops in MLIR and Flang to take
"OpBuilder &" instead of "Builder *". Note the change from pointer and
to reference to comply with the common style in MLIR, this also ensures
all other users must change their ::build methods.
Differential Revision: https://reviews.llvm.org/D78713
- Adds a folder for integer division by one with the `divi_signed` and `divi_unsigned` ops.
- Creates tests for scalar and tensor versions of these ops.
- Modifies the test in `parallel-loop-collapsing.mlir` so that it doesn't assume division by one will be in the output.
Differential Revision: https://reviews.llvm.org/D78518
This can help provide a common interface for view-like
ops so that for example Linalg's dependency analysis
can avoid relying on concrete ops.
Differential Revision: https://reviews.llvm.org/D78645
It currently requires that the condition match the shape of the selected value, but this is only really useful for things like masks. This revision allows for the use of i1 to mean that all of the vector/tensor is selected. This also matches the behavior of LLVM select. A benefit of this change is that transformations that want to generate selects, like those on the CFG, don't have to special case vector/tensor. Previously the only way to generate a select from an i1 was to use a splat, but that doesn't support dynamically shaped/unranked tensors.
Differential Revision: https://reviews.llvm.org/D78690
This revision adds support for canonicalizing the following:
```
br ^bb1
^bb1
br ^bbN(...)
br ^bbN(...)
```
Differential Revision: https://reviews.llvm.org/D78683
This revision adds support for canonicalizing the following:
```
cond_br %cond, ^bb1(A, ..., N), ^bb1(A, ..., N)
br ^bb1(A, ..., N)
```
If the operands to the successor are different and the cond_br is the only predecessor, we emit selects for the branch operands.
```
cond_br %cond, ^bb1(A), ^bb1(B)
%select = select %cond, A, B
br ^bb1(%select)
```
Differential Revision: https://reviews.llvm.org/D78682
This revision adds the initial pass for performing SCCP generically in MLIR. SCCP is an algorithm for propagating constants across control flow, and optimistically assumes all values to be constant unless proven otherwise. It currently supports branching control, with support for regions and inter-procedural propagation being added in followups.
Differential Revision: https://reviews.llvm.org/D78397
This revision moves the various range utilities present in MLIR to LLVM to enable greater reuse. This revision moves the following utilities:
* indexed_accessor_*
This is set of utility iterator/range base classes that allow for building a range class where the iterators are represented by an object+index pair.
* make_second_range
Given a range of pairs, returns a range iterating over the `second` elements.
* hasSingleElement
Returns if the given range has 1 element. size() == 1 checks end up being very common, but size() is not always O(1) (e.g., ilist). This method provides O(1) checks for those cases.
Differential Revision: https://reviews.llvm.org/D78064
Introduce a new operation property / trait (AutomaticAllocationScope)
for operations with regions that define a new scope for automatic allocations;
such allocations (typically realized on stack) are automatically freed when
control leaves such ops' regions. std.alloca's are freed at the closest
surrounding op that has this trait. All FunctionLike operations should normally
have this trait.
Differential Revision: https://reviews.llvm.org/D77787
Minor fixes and cleanup for ShapedType accessors, use
ShapedType::kDynamicSize, add ShapedType::isDynamicDim.
Differential Revision: https://reviews.llvm.org/D77710
Support to recognize and deal with aligned_alloc was recently added to
LLVM's TLI/MemoryBuiltins and its various optimization passes. This
revision adds support for generation of aligned_alloc's when lowering
AllocOp from std to LLVM. Setting 'use-aligned_alloc=1' will lead to
aligned_alloc being used for all heap allocations. An alignment and size
that works with the constraints of aligned_alloc is chosen.
Using aligned_alloc is preferable to "using malloc and adjusting the
allocated pointer to align for indexing" because the pointer access
arithmetic done for the latter only makes it harder for LLVM passes to
deal with for analysis, optimization, attribute deduction, and rewrites.
Differential Revision: https://reviews.llvm.org/D77528
Introduce the alloca op for stack memory allocation. When converting to the
LLVM dialect, this is lowered to an llvm.alloca. Refactor the std to
llvm conversion for alloc op to reuse with alloca. Drop useAlloca option
with alloc op lowering.
Differential Revision: https://reviews.llvm.org/D76602
This greatly simplifies the requirements for builders using this mechanism for managing variadic operands.
Differential Revision: https://reviews.llvm.org/D75317
This attribute details the segment sizes for operand groups within the operation. This revision add support for automatically populating this attribute in the declarative parser.
Differential Revision: https://reviews.llvm.org/D75315
This interface contains the necessary components to provide the same builtin behavior that terminators have. This will be used in future revisions to remove many of the hardcoded constraints placed on successors and successor operands. The interface initially contains three methods:
```c++
// Return a set of values corresponding to the operands for successor 'index', or None if the operands do not correspond to materialized values.
Optional<OperandRange> getSuccessorOperands(unsigned index);
// Return true if this terminator can have it's successor operands erased.
bool canEraseSuccessorOperand();
// Erase the operand of a successor. This is only valid to call if 'canEraseSuccessorOperand' returns true.
void eraseSuccessorOperand(unsigned succIdx, unsigned opIdx);
```
Differential Revision: https://reviews.llvm.org/D75314
This allows for simplifying OpDefGen, as well providing specializing accessors for the different successor counts. This mirrors the existing traits for operands and results.
Differential Revision: https://reviews.llvm.org/D75313
Summary:
The order of the operations has fallen out of sync as operations have been renamed and new ones have been added.
Differential Revision: https://reviews.llvm.org/D75540
Summary: This allows for attaching the attribute to CmpF as a proper argument, and thus enables the removal of a bunch of c++ code.
Differential Revision: https://reviews.llvm.org/D75539
Summary:
The RFC for this op is here: https://llvm.discourse.group/t/rfc-add-std-atomic-rmw-op/489
The std.atmomic_rmw op provides a way to support read-modify-write
sequences with data race freedom. It is intended to be used in the lowering
of an upcoming affine.atomic_rmw op which can be used for reductions.
A lowering to LLVM is provided with 2 paths:
- Simple patterns: llvm.atomicrmw
- Everything else: llvm.cmpxchg
Differential Revision: https://reviews.llvm.org/D74401
This revision add support for formatting successor variables in a similar way to operands, attributes, etc.
Differential Revision: https://reviews.llvm.org/D74789
When operations have optional attributes, or optional operands(i.e. empty variadic operands), the assembly format often has an optional section to represent these arguments. This revision adds basic support for defining an "optional group" in the assembly format to support this. An optional group is defined by wrapping a set of elements in `()` followed by `?` and requires the following:
* The first element of the group must be either a literal or an operand argument.
- This is because the first element must be optionally parsable.
* There must be exactly one argument variable within the group that is marked as the anchor of the group. The anchor is the element whose presence controls whether the group should be printed/parsed. An element is marked as the anchor by adding a trailing `^`.
* The group must only contain literals, variables, and type directives.
- Any attribute variables may be used, but only optional attributes can be marked as the anchor.
- Only variadic, i.e. optional, operand arguments can be used.
- The elements of a type directive must be defined within the same optional group.
An example of this can be seen with the assembly format for ReturnOp, which has a variadic number of operands.
```
def ReturnOp : ... {
let arguments = (ins Variadic<AnyType>:$operands);
// We only print the operands+types if there are a non-zero number
// of operands.
let assemblyFormat = "attr-dict ($operands^ `:` type($operands))?";
}
```
Differential Revision: https://reviews.llvm.org/D74681
This allows for injecting type constraints that are not direct 1-1 mappings, for example when one type is equal to the element type of another. This allows for moving over several more parsers to the declarative form.
Differential Revision: https://reviews.llvm.org/D74648
Summary:
NFC - Moved StandardOps/Ops.h to a StandardOps/IR dir to better match surrounding
directories. This is to match other dialects, and prepare for moving StandardOps
related transforms in out for Transforms and into StandardOps/Transforms.
Differential Revision: https://reviews.llvm.org/D74940
Hanhan Wang