- Add preliminary support for v2i32; load/store generates the right code but
there's a lot work to be done to make this vector type operational.
llvm-svn: 61829
- Fix bugs 3194, 3195: i128 load/stores produce correct code (although, we
need to ensure that i128 is 16-byte aligned in real life), and 128 zero-
extends are supported.
- New td file: SPU128InstrInfo.td: this is where all new i128 support should
be put in the future.
- Continue to hammer on i64 operations and test cases; ensure that the only
remaining problem will be i64 mul.
llvm-svn: 61784
- Fix (brcond (setq ...)) bug, where BRNZ should have been used vice BRZ.
- Kill unused/unnecessary nodes in SPUNodes.td
- Beef out the i64operations.c test harness to use a lot of unaligned
loads, test loops and LLVM loop/basic block optimizations; run the
test harness successfully on real Cell hardware.
llvm-svn: 61664
- Remove custom lowering for BRCOND
- Add remaining functionality for branches in SPUInstrInfo, such as branch
condition reversal and load/store folding. Updated BrCond test to reflect
branch reversal.
llvm-svn: 61597
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
llvm-svn: 61542
instruction sequence and cannot ordinarily be simplified by DAGcombine
into the various target description files or SPUDAGToDAGISel.cpp.
This makes some 64-bit operations legal.
- Eliminate target-dependent ISD enums.
- Update tests.
llvm-svn: 61508
- Move v4i32, i32 mul into SPUInstrInfo.td, with a few more instruction
cleanups there as well.
- Make SMUL_LOHI, UMUL_LOHI competely illegal for Cell SPU, to better
assist Chris to see the problem in bug 3101.
llvm-svn: 61464
DAGcombine's ability to find reasons to remove truncates when they were not
needed. Consequently, the CellSPU backend would produce correct, but _really
slow and horrible_, code.
Replaced with instruction sequences that do the equivalent truncation in
SPUInstrInfo.td.
- Re-examine how unaligned loads and stores work. Generated unaligned
load code has been tested on the CellSPU hardware; see the i32operations.c
and i64operations.c in CodeGen/CellSPU/useful-harnesses. (While they may be
toy test code, it does prove that some real world code does compile
correctly.)
- Fix truncating stores in bug 3193 (note: unpack_df.ll will still make llc
fault because i64 ult is not yet implemented.)
- Added i64 eq and neq for setcc and select/setcc; started new instruction
information file for them in SPU64InstrInfo.td. Additional i64 operations
should be added to this file and not to SPUInstrInfo.td.
llvm-svn: 61447
- Fix bug 3185, with misc other cleanups.
- Needed to implement SPUInstrInfo::InsertBranch(). CAUTION: Not sure what
gets or needs to get passed to InsertBranch() to insert a conditional
branch. This will abort for now until a good test case shows up.
llvm-svn: 60811
- Change default scheduling preference to list-burr, which produces somewhat
better code than the default. Could also use list-tdrr, but need to ask
dev list about the appropriate handy mnemonic before commiting.
llvm-svn: 60738
- Add v4f32, v2f64 to LowerVECTOR_SHUFFLE
- Look for vector rotate in shuffle elements, generate a vector rotate
instead of a full-blown shuffle when opportunity presents itself.
- Generate larger test harness and fix a few interesting but obscure bugs.
llvm-svn: 60552
- First patch from Nehal Desai, a new contributor at Aerospace. Nehal's patch
fixes sign/zero/any-extending loads for integers and floating point. Example
code, compiled w/o debugging or optimization where he first noticed the bug:
int main(void) {
float a = 99.0;
printf("%d\n", a);
return 0;
}
Verified that this code actually works on a Cell SPU.
Changes by Scott Michel:
- Fix bug in the value type list constructed by SPUISD::LDRESULT to include
both the load result's result and chain, not just the chain alone.
- Simplify LowerLOAD and remove extraneous and unnecessary chains.
- Remove unused SPUISD pseudo instructions.
llvm-svn: 60526
- Incorporate Tilmann Scheller's ISD::TRUNCATE custom lowering patch
- Update SPU calling convention info, even if it's not used yet (but can be
at some point or another)
- Ensure that any-extended f32 loads are custom lowered, especially when
they're promoted for use in printf.
llvm-svn: 60438
- Fix v2[if]64 vector insertion code before IBM files a bug report.
- Ensure that zero (0) offsets relative to $sp don't trip an assert
(add $sp, 0 gets legalized to $sp alone, tripping an assert)
- Shuffle masks passed to SPUISD::SHUFB are now v16i8 or v4i32
llvm-svn: 60358
ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.
llvm-svn: 60348
(a) Remove conditionally removed code in SelectXAddr. Basically, hope for the
best that the A-form and D-form address predicates catch everything before
the code decides to emit a X-form address.
(b) Expand vector store test cases to include the usual suspects.
llvm-svn: 60034
(a) Slight rethink on i64 zero/sign/any extend code - use a shuffle to
directly zero-extend i32 to i64, but use rotates and shifts for
sign extension. Also ensure unified register consistency.
(b) Add new test harness for i64 operations: i64ops.ll
llvm-svn: 59970
(a) Improve the extract element code: there's no need to do gymnastics with
rotates into the preferred slot if a shuffle will do the same thing.
(b) Rename a couple of SPUISD pseudo-instructions for readability and better
semantic correspondence.
(c) Fix i64 sign/any/zero extension lowering.
llvm-svn: 59965
(a) Remove moved file (SPUAsmPrinter.cpp) to make svn happy.
(b) Remove truncated stores that will never be used.
(c) Add initial support for __muldi3 as a libcall.
llvm-svn: 59734
is currently off by default, and can be enabled with
-disable-post-RA-scheduler=false.
This doesn't have a significant impact on most code yet because it doesn't
yet do anything to address anti-dependencies and it doesn't attempt to
disambiguate memory references. Also, several popular targets
don't have pipeline descriptions yet.
The majority of the changes here are splitting the SelectionDAG-specific
code out of ScheduleDAG, so that ScheduleDAG can be moved to
libLLVMCodeGen.a. The interface between ScheduleDAG-using code and
the rest of the scheduling code is somewhat rough and will evolve.
llvm-svn: 59676
well as 2 files that use "Registrator"s. These are to be used by the
MSVC builds, as the Win32 linker does not include libs that are
otherwise unreferenced, even if global constructors in the lib have
side-effects.
Patch by Scott Graham!
llvm-svn: 59378
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.
The impact on most targets is that AddToISelQueue calls can be simply removed.
In the x86 target, there are two additional notable changes.
The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.
Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.
llvm-svn: 58748
so that va_start/va_arg/et.al. will walk arguments correctly for Cell SPU.
N.B.: Because neither clang nor llvm-gcc-4.2 can be built for CellSPU, this is
still unexorcised code.
llvm-svn: 58415
flag. Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like. This really helps when debugging instruction selection.
llvm-svn: 58278
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
llvm-svn: 57748
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
llvm-svn: 57521
GCC 4.4.0 gives an error on the "int" declaration for example
saying that it has already been declared (using the "short"
one). Using templates here allow the compiler to distinguish
between the function to choose.
Also, "llvm/Support/DataTypes.h" was not included, leading to
error messages about not knowing "uint32_t" for example.
Patch by Samuel Tardieu.
llvm-svn: 57292
information is in an unreachable block, then it's possible that the high/low pc
values won't be set for the dwarf information. E.g., this function:
void abort(void) __attribute__((__noreturn__));
void dead_beef(void) __attribute__ ((noreturn));
int *b;
void dead_beef(void) {
*b=0xdeadbeef;
abort();
}
has a call to "@llvm.dbg.region.end" only in the unreachable block:
define void @dead_beef() noreturn nounwind {
entry:
call void @llvm.dbg.func.start(...)
call void @llvm.dbg.stoppoint(...)
...
call void @abort( ) noreturn nounwind
unreachable
return: ; No predecessors!
call void @llvm.dbg.stoppoint(...)
call void @llvm.dbg.region.end(...)
ret void
}
The dwarf information emitted is something like:
0x00000084: TAG_subprogram [5]
AT_name( "dead_beef" )
AT_external( 0x01 )
AT_prototyped( 0x01 )
AT_decl_file( 0x01 )
AT_decl_line( 0x08 )
Note that this is *not* the best fix for this problem, but a band-aid for an
gaping wound. This code needs to be changed when we revamp our debugging
information.
llvm-svn: 56628
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
llvm-svn: 56249
Currently it just holds the calling convention and flags
for isVarArgs and isTailCall.
And it has several utility methods, which eliminate magic
5+2*i and similar index computations in several places.
CallSDNodes are not CSE'd. Teach UpdateNodeOperands to handle
nodes that are not CSE'd gracefully.
llvm-svn: 56183
instructions in CellSPU as "Expand" so that they won't be generated. I added a
"FIXME" so that this hack can be addressed and reverted once ISD::ROTR is
supported in the .td files.
llvm-svn: 55582
was inserted or not. This allows bitcast in fast isel to properly handle the case
where an appropriate reg-to-reg copy is not available.
llvm-svn: 55375
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
llvm-svn: 55219
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
llvm-svn: 53728
Misha Brukman