Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Switch some additional library call setup to be table driven. This
makes it more immediately obvious what the library call looks like.
This is important for ARM since the calling conventions for the builtins
change based on the target/libcall name. NFC
llvm-svn: 291789
The new matchers work after legalization to make them simpler, and to avoid
blocking other optimizations.
Differential Revision: https://reviews.llvm.org/D27779
llvm-svn: 291693
See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
llvm-svn: 289706
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
Summary:
Variadic functions can be treated in the same way as normal functions
with respect to the number and types of parameters.
Reviewers: grosbach, olista01, t.p.northover, rengolin
Subscribers: javed.absar, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26748
llvm-svn: 287219
One half of the shifts obviously needed conditional selection based on whether
the shift amount is more than 32-bits, but leaving the other half as the
natural shift isn't acceptable either: it's undefined behaviour to shift a
32-bit value by more than 31.
llvm-svn: 287149
This handles the last case of the builtin function calls that we would
generate code which differed from Microsoft's ABI. Rather than
generating a call to `__pow{d,s}i2` we now promote the parameter to a
float or double and invoke `powf` or `pow` instead.
Addresses PR30825!
llvm-svn: 286082
Summary: ARMv6m supports dmb etc fench instructions but not ldrex/strex etc. So for some atomic load/store, LLVM should inline instructions instead of lowering to __sync_ calls.
Reviewers: rengolin, efriedma, t.p.northover, jmolloy
Subscribers: efriedma, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26120
llvm-svn: 285969
Generate the slowest possible codepath for noopt CodeGen. Even trying to be
clever with the negated jump can cause out-of-range jumps. Use a wide branch
instead. Although the code is modelled simplistically, the later optimizations
would recombine the branching into `cbz` if possible. This re-enables the
previous optimization as well as hopefully gives us working code in all cases.
Addresses PR30356!
llvm-svn: 285649
The Windows ARM target expects the compiler to emit a division-by-zero check.
The check would use the form of:
cmp r?, #0
cbz .Ltrap
b .Lbody
.Lbody:
...
.Ltrap:
udf #249 @ __brkdiv0
This works great most of the time. However, if the body of the function is
greater than 127 bytes, the branch target limitation of cbz becomes an issue.
This occurs in the unoptimized code generation cases sometimes (like in
compiler-rt).
Since this is a matter of correctness, possibly pay a small penalty instead. We
now form this slightly differently:
cbnz .Lbody
udf #249 @ __brkdiv0
.Lbody:
...
The positive case is through the branch instead of being the next instruction.
However, because of the basic block layout, the negated branch is going to be
a short distance always (2 bytes away, after the inserted __brkdiv0).
The new t__brkdiv0 instruction is required to explicitly mark the instruction as
a terminator as the generic UDF instruction is not a terminator.
Addresses PR30532!
llvm-svn: 285312
UMAAL is a DSP instruction and it is not available on thumbv7m
(Cortex-M3) and thumbv6m (Cortex-M0+1) targets. Also fix wrong
CHECK prefix in longMAC.ll test.
Patch by Vadzim Dambrouski.
Differential Revision: https://reviews.llvm.org/D25890
llvm-svn: 285278
The custom lowering is pretty straightforward: basically, just AND
together the two halves of a <4 x i32> compare.
Differential Revision: https://reviews.llvm.org/D25713
llvm-svn: 284536
This patch assigns cost of the scaling used in addressing.
On many ARM cores, a negated register offset takes longer than a
non-negated register offset, in a register-offset addressing mode.
For instance:
LDR R0, [R1, R2 LSL #2]
LDR R0, [R1, -R2 LSL #2]
Above, (1) takes less cycles than (2).
By assigning appropriate scaling factor cost, we enable the LLVM
to make the right trade-offs in the optimization and code-selection phase.
Differential Revision: http://reviews.llvm.org/D24857
Reviewers: jmolloy, rengolin
llvm-svn: 284127
Currently, the Int_eh_sjlj_dispatchsetup intrinsic is marked as
clobbering all registers, including floating-point registers that may
not be present on the target. This is technically true, as we could get
linked against code that does use the FP registers, but that will not
actually work, as the soft-float code cannot save and restore the FP
registers. SjLj exception handling can only work correctly if either all
or none of the code is built for a target with FP registers. Therefore,
we can assume that, when Int_eh_sjlj_dispatchsetup is compiled for a
soft-float target, it is only going to be linked against other
soft-float code, and so only clobbers the general-purpose registers.
This allows us to check that no non-savable registers are clobbered when
generating the prologue/epilogue.
Differential Revision: https://reviews.llvm.org/D25180
llvm-svn: 283866
Reapplying r283383 after revert in r283442. The additional fix
is a getting rid of a stray space in a function name, in the
refactoring part of the commit.
This avoids falling back to calling out to the GCC rem functions
(__moddi3, __umoddi3) when targeting Windows.
The __rt_div functions have flipped the two arguments compared
to the __aeabi_divmod functions. To match MSVC, we emit a
check for division by zero before actually calling the library
function (even if the library function itself also might do
the same check).
Not all calls to __rt_div functions for division are currently
merged with calls to the same function with the same parameters
for the remainder. This is more wasteful than a div + mls as before,
but avoids calls to __moddi3.
Differential Revision: https://reviews.llvm.org/D25332
llvm-svn: 283550
This reverts commit r283383 because it broke some of the bots:
undefined reference to ` __aeabi_uldivmod'
It affected (at least) clang-cmake-armv7-a15-selfhost,
clang-cmake-armv7-a15-selfhost and clang-native-arm-lnt.
llvm-svn: 283442
Global variables are GlobalValues, so they have explicit alignment. Querying
DataLayout for the alignment was incorrect.
Testcase added.
llvm-svn: 283423
This avoids falling back to calling out to the GCC rem functions
(__moddi3, __umoddi3) when targeting Windows.
The __rt_div functions have flipped the two arguments compared
to the __aeabi_divmod functions. To match MSVC, we emit a
check for division by zero before actually calling the library
function (even if the library function itself also might do
the same check).
Not all calls to __rt_div functions for division are currently
merged with calls to the same function with the same parameters
for the remainder. This is more wasteful than a div + mls as before,
but avoids calls to __moddi3.
Differential Revision: https://reviews.llvm.org/D24076
llvm-svn: 283383
library call to __aeabi_uidivmod. This is an improved implementation of
r280808, see also D24133, that got reverted because isel was stuck in a loop.
That was caused by the optimisation incorrectly triggering on i64 ints, which
shouldn't happen because there is no 64bit hwdiv support; that put isel's type
legalization and this optimisation in a loop. A native ARM compiler and testing
now shows that this is fixed.
Patch mostly by Pablo Barrio.
Differential Revision: https://reviews.llvm.org/D25077
llvm-svn: 283098
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
llvm-svn: 282387
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
llvm-svn: 282241
(and the same for SREM)
This was causing buildbot failures earlier (time outs in the LNT suite).
However, we haven't been able to reproduce this and are suspecting this
was caused by another (reverted) patch.
llvm-svn: 281719
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
llvm-svn: 281715
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
llvm-svn: 281604
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
llvm-svn: 281484
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
llvm-svn: 281314
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
llvm-svn: 281213
Summary:
An IR load can be invariant, dereferenceable, neither, or both. But
currently, MI's notion of invariance is IR-invariant &&
IR-dereferenceable.
This patch splits up the notions of invariance and dereferenceability at
the MI level. It's NFC, so adds some probably-unnecessary
"is-dereferenceable" checks, which we can remove later if desired.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D23371
llvm-svn: 281151
Move the target specific setup into the target specific lowering setup. As
pointed out by Anton, the initial change was moving this too high up the stack
resulting in a violation of the layering (the target generic code path setup
target specific bits). Sink this into the ARM specific setup. NFC.
llvm-svn: 281088
This reverts commit r280808.
It is possible that this change results in an infinite loop. This
is causing timeouts in some tests on ARM, and a Chromebook bot is
failing.
llvm-svn: 280918
Summary:
This saves a library call to __aeabi_uidivmod. However, the
processor must feature hardware division in order to benefit from
the transformation.
Reviewers: scott-0, jmolloy, compnerd, rengolin
Subscribers: t.p.northover, compnerd, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D24133
llvm-svn: 280808
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
This patch adds support for some new relocation models to the ARM
backend:
* Read-only position independence (ROPI): Code and read-only data is accessed
PC-relative. The offsets between all code and RO data sections are known at
static link time. This does not affect read-write data.
* Read-write position independence (RWPI): Read-write data is accessed relative
to the static base register (r9). The offsets between all writeable data
sections are known at static link time. This does not affect read-only data.
These two modes are independent (they specify how different objects
should be addressed), so they can be used individually or together. They
are otherwise the same as the "static" relocation model, and are not
compatible with SysV-style PIC using a global offset table.
These modes are normally used by bare-metal systems or systems with
small real-time operating systems. They are designed to avoid the need
for a dynamic linker, the only initialisation required is setting r9 to
an appropriate value for RWPI code.
I have only added support to SelectionDAG, not FastISel, because
FastISel is currently disabled for bare-metal targets where these modes
would be used.
Differential Revision: https://reviews.llvm.org/D23195
llvm-svn: 278015
Summary:
Commit 276701 requires that targets have the DSP extensions to use
certain saturating instructions. This requires some corrections.
For ARM ISA the instructions in question are available in all v6*
architectures.
For Thumb2, the instructions in question are available from v6T2.
SSAT and USAT are part of the base architecture while SSAT16 and
USAT16 require the DSP extensions.
Reviewers: rengolin
Subscribers: aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23010
llvm-svn: 277439
Summary:
The MOV/MOVT instructions being chosen for struct_byval predicates was
conditional only on Thumb2, resulting in an ARM MOV/MOVT instruction
being incorrectly emitted in Thumb1 mode. This is especially apparent
with v8-m.base targets. This patch ensures that Thumb instructions are
emitted in both Thumb modes.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, aemerson, rengolin
Differential Revision: https://reviews.llvm.org/D22865
llvm-svn: 277128
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
Inference of the 'returned' attribute was fixed in r276008, lets try
turning the backend support back on.
This reverts commit r275677.
llvm-svn: 276081
At higher optimization levels, we generate the libcall for DIVREM_Ix, which is
fine: aeabi_{u|i}divmod. At -O0 we generate the one for REM_Ix, which is the
default {u}mod{q|h|s|d}i3.
This commit makes sure that we don't generate REM_Ix calls for ABIs that
don't support them (i.e. where we need to use DIVREM_Ix instead). This is
achieved by bailing out of FastISel, which can't handle non-double multi-reg
returns, and letting the legalization infrastructure expand the REM_Ix calls.
It also updates the divmod-eabi.ll test to run under -O0 as well, and adds some
Windows checks to it to make sure we don't break things for it.
Fixes PR27068
Differential Revision: https://reviews.llvm.org/D21926
llvm-svn: 275773
r275042 reverted function-attribute inference for the 'returned' attribute
because the feature triggered self-hosting failures on ARM and AArch64. James
Molloy determined that the this-return argument forwarding feature, which
directly ties the returned input argument to the returned value, was the cause.
It seems likely that this forwarding code contains, or triggers, a subtle bug.
Disabling for now until we can track that down.
llvm-svn: 275677
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Thumb-1 doesn't have post-inc or pre-inc load or store instructions. However the LDM/STM instructions with writeback can function as post-inc load/store:
ldm r0!, {r1} @ load from r0 into r1 and increment r0 by 4
Obviously, this only works if the post increment is 4.
llvm-svn: 275540
... When we emit several calls to the same function in the same basic block.
An indirect call uses a "BLX r0" instruction which has a 16-bit encoding. If many calls are made to the same target, this can enable significant code size reductions.
llvm-svn: 275537
Remove remaining implicit conversions from MachineInstrBundleIterator to
MachineInstr* from the ARM backend. In most cases, I made them less attractive
by preferring MachineInstr& or using a ranged-based for loop.
Once all the backends are fixed I'll make the operator explicit so that this
doesn't bitrot back.
llvm-svn: 274920
Not all code-paths set the relocation model to static for Windows. This
currently breaks on Windows ARM with `-mlong-calls` when built with clang.
Loosen the assertion to what it was previously. We would ideally ensure that
all the configuration sets Windows to static relocation model.
llvm-svn: 274570
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
This is a cleanup commit similar to r271555, but for ARM.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
Since the ARM backend seems to have quite a lot of calls to these methods, I
intend to submit 5-6 subtarget features at a time, instead of one big lump.
Differential Revision: http://reviews.llvm.org/D21432
llvm-svn: 273544
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
Reduces a bit of code duplication and clarify where we are interested
just on position independence and no the location of the symbol.
llvm-svn: 273164
The R_ARM_PLT32 relocation is deprecated and is not produced by MC.
This means that the code being deleted is dead from the .o point of
view and was making the .s more confusing.
llvm-svn: 272909
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
TLS access requires an offset from the TLS index. The index itself is the
section-relative distance of the symbol. For ARM, the relevant relocation
(IMAGE_REL_ARM_SECREL) is applied as a constant. This means that the value may
not be an immediate and must be lowered into a constant pool. This offset will
not be base relocated. We were previously emitting the actual address of the
symbol which would be base relocated and would therefore be the vaue offset by
the ImageBase + TLS Offset.
llvm-svn: 271974
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
I'm really not sure why we were in the first place, it's the linker's job to
convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls
that could be locally resolved completely unencodable since all offsets to BLX
are multiples of 4.
rdar://26182344
llvm-svn: 269101
Summary:
This patch adds support for the X asm constraint.
To do this, we lower the constraint to either a "w" or "r" constraint
depending on the operand type (both constraints are supported on ARM).
Fixes PR26493
Reviewers: t.p.northover, echristo, rengolin
Subscribers: joker.eph, jgreenhalgh, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D19061
llvm-svn: 267411
This corrects the MI annotations for the stack adjustment following the __chkstk
invocation. We were marking the original SP usage as a Def rather than Kill.
The (new) assigned value is the definition, the original reference is killed.
Adjust the ISelLowering to mark Kills and FrameSetup as well.
This partially resolves PR27480.
llvm-svn: 267361
Because lowering of CMP_SWAP_64 occurs during type legalization, there can be
i64 types produced by more than just a BUILD_PAIR or similar. My initial tests
used just incoming function args.
llvm-svn: 266828
Both AArch64 and ARM support llvm.<arch>.thread.pointer intrinsics that
just return the thread pointer. I have a pending patch that does the same
for SystemZ (D19054), and there are many more targets that could benefit
from one.
This patch merges the ARM and AArch64 intrinsics into a single target
independent one that will also be used by subsequent targets.
Differential Revision: http://reviews.llvm.org/D19098
llvm-svn: 266818
The fast register-allocator cannot cope with inter-block dependencies without
spilling. This is fine for ldrex/strex loops coming from atomicrmw instructions
where any value produced within a block is dead by the end, but not for
cmpxchg. So we lower a cmpxchg at -O0 via a pseudo-inst that gets expanded
after regalloc.
Fortunately this is at -O0 so we don't have to care about performance. This
simplifies the various axes of expansion considerably: we assume a strong
seq_cst operation and ensure ordering via the always-present DMB instructions
rather than v8 acquire/release instructions.
Should fix the 32-bit part of PR25526.
llvm-svn: 266679
It is very likely that the swiftself parameter is alive throughout most
functions function so putting it into a callee save register should
avoid spills for the callers with only a minimum amount of extra spills
in the callees.
Currently the generated code is correct but unnecessarily spills and
reloads arguments passed in callee save registers, I will address this
in upcoming patches.
This also adds a missing check that for tail calls the preserved value
of the caller must be the same as the callees parameter.
Differential Revision: http://reviews.llvm.org/D18901
llvm-svn: 266253
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
llvm-svn: 265602
We can only perform a tail call to a callee that preserves all the
registers that the caller needs to preserve.
This situation happens with calling conventions like preserver_mostcc or
cxx_fast_tls. It was explicitely handled for fast_tls and failing for
preserve_most. This patch generalizes the check to any calling
convention.
Related to rdar://24207743
Differential Revision: http://reviews.llvm.org/D18680
llvm-svn: 265329
ThreadModel::Single is already handled already by ARMPassConfig adding
LowerAtomicPass to the pass list, which lowers all atomics to non-atomic
ops and deletes fences.
So by the time we get to ISel, there's no atomic fences left, so they
don't need special handling.
llvm-svn: 265178
It is possible to have a fallthrough MBB prior to MBB placement. The original
addition of the BB would result in reordering the BB as not preceding the
successor. Because of the fallthrough nature of the BB, we could end up
executing incorrect code or even a constant pool island! Insert the spliced BB
into the same location to avoid that.
Thanks to Tim Northover for invaluable hints and Fiora for the discussion on
what may have been occurring!
llvm-svn: 264454
We did not have an explicit branch to the continuation BB. When the check was
hoisted, this could permit control follow to fall through into the division
trap. Add the explicit branch to the continuation basic block to ensure that
code execution is correct.
llvm-svn: 264370
This introduces a custom lowering for ISD::SETCCE (introduced in r253572)
that allows us to emit a short code sequence for 64-bit compares.
Before:
push {r7, lr}
cmp r0, r2
mov.w r0, #0
mov.w r12, #0
it hs
movhs r0, #1
cmp r1, r3
it ge
movge.w r12, #1
it eq
moveq r12, r0
cmp.w r12, #0
bne .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
After:
push {r7, lr}
subs r0, r0, r2
sbcs.w r0, r1, r3
bge .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
Saves around 80KB in Chromium's libchrome.so.
Some notes on this patch:
- I don't much like the ARMISD::BRCOND and ARMISD::CMOV combines I
introduced (nothing else needs them). However, they are necessary in
order to avoid poor codegen, and they seem similar to existing combines
in other backends (e.g. X86 combines (brcond (cmp (setcc Compare))) to
(brcond Compare)).
- No support for Thumb-1. This is in principle possible, but we'd need
to implement ARMISD::SUBE for Thumb-1.
Differential Revision: http://reviews.llvm.org/D15256
llvm-svn: 263962
The two changes together weakened the test and caused a regression with division
handling in MSVC mode. They were applied to avoid an assertion being triggered
in the block frequency analysis. However, the underlying problem was simply
being masked rather than solved properly. Address the actual underlying problem
and revert the changes. Rather than analyze the cause of the assertion, the
division failure was assumed to be an overflow.
The underlying issue was a subtle bug in the BB construction in the emission of
the div-by-zero check (WIN__DBZCHK). We did not construct the proper successor
information in the basic blocks, nor did we update the PHIs associated with the
basic block when we split them. This would result in assertions being triggered
in the block frequency analysis pass.
Although the original tests are being removed, the tests themselves performed
very little in terms of validation but merely tested that we did not assert when
generating code. Update this with new tests that actually ensure that we do not
regress on the code generation.
llvm-svn: 263714
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
llvm-svn: 263665
This change adds a support for a preserve_most calling convention to the AArch64 backend, similar to how it was done for X86-64.
There is also a subsequent patch on top of this one to add a tail-calls support for this calling convention.
Differential Revision: http://reviews.llvm.org/D18016
llvm-svn: 263092
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
Second attempt, creating TLI.isOperationCustom like isOperationExpand, to make
sure we only emit valid types or the ones that were explicitly marked as custom.
Now, passing check-all and test-suite on x86, ARM and AArch64.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262738
When div+rem calls on the same arguments are found, the ARM back-end merges the
two calls into one __aeabi_divmod call for up to 32-bits values. However,
for 64-bit values, which also have a lib call (__aeabi_ldivmod), it wasn't
merging the calls, and thus calling ldivmod twice and spilling the temporary
results, which generated pretty bad code.
This patch legalises 64-bit lib calls for divmod, so that now all the spilling
and the second call are gone. It also relaxes the DivRem combiner a bit on the
legal type check, since it was already checking for isLegalOrCustom on every
value, so the extra check for isTypeLegal was redundant.
This patch fixes PR17193 (and a long time FIXME in the tests).
llvm-svn: 262507
Summary:
If we want classify OoO or not, using getSchedModel().isOutOfOrder()
could be more proper way than using Subtarget->isLikeA9().
Reviewers: jmolloy, rengolin
Differential Revision: http://reviews.llvm.org/D17433
llvm-svn: 261623
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
The GNU toolchain emits __aeabi_divmod for soft-divide on ARM cores
which happens to be a lot faster than __divsi3/__modsi3 when the core
has hardware divide instructions. Do the same here.
Fixes PR26450.
llvm-svn: 259657
Various bits we want to use the new ABI actually compile with "-arch armv7k
-miphoneos-version-min=9.0". Not ideal, but also not ridiculous given how
slices work.
llvm-svn: 258975
When we have a single basic block, the explicit copy-back instructions should
be inserted right before the terminator. Before this fix, they were wrongly
placed at the beginning of the basic block.
PR26136
llvm-svn: 257930
Summary:
r255334 matches bit-reverse pattern in InstCombine and generates calls to Instrinsic::bitreverse.
RBIT instruction is only available for ARMv6t2 and above. This patch has the intrinsic expanded during legalization for ARMv4 and ARMv5.
Patch by Z. Zheng <zhaoshiz@codeaurora.org>
Reviewers: apazos, jmolloy, weimingz
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D15932
llvm-svn: 257188
Diana Picus