Summary:
This commit enables the MIPS-III target and adds support for code
generation of SELECT nodes. We have to use pseudo-instructions with
custom inserters for these nodes as MIPS-III CPUs do not have
conditional-move instructions.
Depends on D6212
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6464
llvm-svn: 224128
This reapplies r224118 with a fix for test 'misched-code-difference-with-debug.ll'.
That test was failing on some buildbots because it was x86 specific but it was
missing a target triple.
Added an explicit triple to test misched-code-difference-with-debug.ll.
llvm-svn: 224126
Summary:
For Mips targets that do not have conditional-move instructions, ie. targets
before MIPS32 and MIPS-IV, we have to insert a diamond control-flow
pattern in order to support SELECT nodes. In order to do that, we add
pseudo-instructions with a custom inserter that emits the necessary
control-flow that selects the correct value.
With this patch we add complete support for code generation of Mips-II targets
based on the LLVM test-suite.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6212
llvm-svn: 224124
This patch fixes the issue reported as PR21807. There was a minor difference
in the generated code depending on the -g flag.
The cause was that with -g the machine scheduler used a different
scheduling strategy. This decision was based on the number of instructions
in a schedule region and included debug instructions in that count.
This patch fixes the issue in MISched and provides a test.
Patch by Russell Gallop!
llvm-svn: 224118
The __fp16 type is unconditionally exposed. Since -mfp16-format is not yet
supported, there is not a user switch to change this behaviour. This build
attribute should capture the default behaviour of the compiler, which is to
expose the IEEE 754 version of __fp16.
When -mfp16-format is emitted, that will be the way to control the value of
this build attribute.
Change-Id: I8a46641ff0fd2ef8ad0af5f482a6d1af2ac3f6b0
llvm-svn: 224115
DW_OP_const <const> doesn't describe a constant value, but a value at a constant address.
The proper way to describe a constant value is DW_OP_constu <const>, DW_OP_stack_value.
Added DW_OP_stack_value to the stack.
Marked incorrect-variable-debugloc1.ll to xfail for PowerPC64, while the the failure (PR21881)
is being investigated.
llvm-svn: 224098
Summary:
InstCombine infinite-loops for the testcase added
It is because InstCombine is generating instructions that can be
optimized by itself. Fix by not optimizing frem if the optimized
type is the same as original type.
rdar://problem/19150820
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6634
llvm-svn: 224097
The returned operand needs to be permuted for the unordered
compares. Also fix incorrectly producing fmin_legacy / fmax_legacy
for f64, which don't exist.
llvm-svn: 224094
This is nice for the instruction patterns, but it complicates
min / max matching. The select doesn't have the correct type and would
require looking through the bitcasts for the real float operands.
llvm-svn: 224092
Also remove redundant documentation:
- doxygen will copy documentation to overriden methods.
- Use \copydoc on PIMPL classes instead of replicating the text.
llvm-svn: 224089
Updating comments to reflect the current state of the world after my recent changes to ownership structure and generally better describe what a GCStrategy is and how it works.
llvm-svn: 224086
Add an option to disable optimization to shrink truncated larger type
loads to smaller type loads. On SI this prevents using scalar load
instructions in some cases, since there are no scalar extloads.
llvm-svn: 224084
This was checking if pseudo-operands like the source
modifiers were using the constant bus, which happens to work
because the values these all can be happen to be valid inline
immediates.
This fixes a later commit which starts checking the register class
of the operands.
llvm-svn: 224078
`MDString`s can have arbitrary characters in them. Prevent an assertion
that fired in `BitcodeWriter` because of sign extension by copying the
characters into the record as `unsigned char`s.
Based on a patch by Keno Fischer; fixes PR21882.
llvm-svn: 224077
This reflects the typelessness of `Metadata` in the bitcode format,
removing types from all metadata operands.
`METADATA_VALUE` represents a `ValueAsMetadata`, and always has two
fields: the type and the value.
`METADATA_NODE` represents an `MDNode`, and unlike `METADATA_OLD_NODE`,
doesn't store types. It stores operands at their ID+1 so that `0` can
reference `nullptr` operands.
Part of PR21532.
llvm-svn: 224073
If we have an add (or an or that is really an add), where one operand is a
FrameIndex and the other operand is a small constant, we can combine the
lowering of the FrameIndex (which is lowered as an add of the FI and a zero
offset) with the constant operand.
Amusingly, this is an old potential improvement entry from
lib/Target/PowerPC/README.txt which had never been resolved. In short, we used
to lower:
%X = alloca { i32, i32 }
%Y = getelementptr {i32,i32}* %X, i32 0, i32 1
ret i32* %Y
as:
addi 3, 1, -8
ori 3, 3, 4
blr
and now we produce:
addi 3, 1, -4
blr
which is much more sensible.
llvm-svn: 224071
This commit changes the way we get fake stack from ASan runtime
(to find use-after-return errors) and the way we represent local
variables:
- __asan_stack_malloc function now returns pointer to newly allocated
fake stack frame, or NULL if frame cannot be allocated. It doesn't
take pointer to real stack as an input argument, it is calculated
inside the runtime.
- __asan_stack_free function doesn't take pointer to real stack as
an input argument. Now this function is never called if fake stack
frame wasn't allocated.
- __asan_init version is bumped to reflect changes in the ABI.
- new flag "-asan-stack-dynamic-alloca" allows to store all the
function local variables in a dynamic alloca, instead of the static
one. It reduces the stack space usage in use-after-return mode
(dynamic alloca will not be called if the local variables are stored
in a fake stack), and improves the debug info quality for local
variables (they will not be described relatively to %rbp/%rsp, which
are assumed to be clobbered by function calls). This flag is turned
off by default for now, but I plan to turn it on after more
testing.
llvm-svn: 224062
Since `MachineInstr` is required to have a trivial destructor, it cannot
remove itself from `LeakDetection`. Remove the calls.
As it happens, this requirement is because `MachineFunction` allocates
all `MachineInstr`s in a custom allocator; when the `MachineFunction` is
destroyed they're dropped of the edge. There's no benefit to detecting
leaks.
llvm-svn: 224061
This gives us better leak detection messages, like `Value` has.
This also has the side effect of papering over a problem where
`MachineInstr`s are added as garbage to the leak detector and then
deleted without being removed. If `MDNode::getTemporary()` allocates an
`MDNodeFwdDecl` in the same spot, the leak detector asserts. By
separating `MDNode`s into their own container we lose that assertion.
Since `MachineInstr` is required to have a trivial destructor, its usage
of `LeakDetector` at all is pretty suspect. I'll be sending a patch
soon to strip that out.
llvm-svn: 224060
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
This is the 2nd attempt at this after realizing that PassManager::add() may
actually delete the pass.
llvm-svn: 224059
This patch teaches the instruction combiner how to fold a call to 'insertqi' if
the 'length field' (3rd operand) is set to zero, and if the sum between
field 'length' and 'bit index' (4th operand) is bigger than 64.
From the AMD64 Architecture Programmer's Manual:
1. If the sum of the bit index + length field is greater than 64, then the
results are undefined;
2. A value of zero in the field length is defined as a length of 64.
This patch improves the existing combining logic for intrinsic 'insertqi'
adding extra checks to address both point 1. and point 2.
Differential Revision: http://reviews.llvm.org/D6583
llvm-svn: 224054
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
llvm-svn: 224042
The distinction is mostly useful in the front-end. By the time we get here,
there are very few situations where we actually want different behaviour for
Darwin and IOS (in fact Darwin mostly just exists in a few tests). So this
should reduce any surprising weirdness for anyone using it.
No functional change on anything anyone actually cares about.
llvm-svn: 224035
PPCISelDAGToDAG contained existing code to lower i32 sdiv by a power-of-2 using
srawi/addze, but did not implement the i64 case. DAGCombine now contains a
callback specifically designed for this purpose (BuildSDIVPow2), and part of
the logic has been moved to an implementation of that callback. Doing this
lowering using BuildSDIVPow2 likely does not matter, compared to handling
everything in PPCISelDAGToDAG, for the positive divisor case, but the negative
divisor case, which generates an additional negation, can potentially benefit
from additional folding from DAGCombine. Now, both the i32 and the i64 cases
have been implemented.
Fixes PR20732.
llvm-svn: 224033
Properly determine whether or not a phi was added by splitting.
Check against the current VNInfo of OrigLI instead of against the
OrigVNI argument.
Patch provided by Jonas Paulsson. Reviewed by Quentin Colombet.
llvm-svn: 224009
The test is failing for llvm-ppc64 because for this platform the location list is not being generated at all (most likely because of the bug in PPC code optimization or generation). I will file a bug agains PPC compiler, but meanwhile, until PPC bug is fixed, I will have to revert my change.
llvm-svn: 224000
Ideally we would store the MultiClasses by value directly in the maps, but I had some trouble with that before and this at least fixes the leak.
llvm-svn: 223997
This change moves the ownership and access of GCFunctionInfo (the object which describes the safepoints associated with a safepoint under GCRoot) to GCModuleInfo. Previously, this was owned by GCStrategy which was in turned owned by GCModuleInfo. This made GCStrategy module specific which is 'surprising' given it's name and other purposes.
There's a few more changes needed, but we're getting towards the point we can reuse GCStrategy for gc.statepoint as well.
p.s. The style of this code ends up being a mess. I was trying to move code around without otherwise changing much. Once I get the ownership structure rearranged, I will go through and fixup spacing, naming, comments etc.
Differential Revision: http://reviews.llvm.org/D6587
llvm-svn: 223994
Quite a major error here: the expansions for the Pseudos with and without
folded load were mixed up. Fortunately it only affects ARM-mode, when not using
movw/movt, on Darwin. I'm guessing no-one actually uses that combination.
llvm-svn: 223986
DW_OP_const <const> doesn't describe a constant value, but a value at a constant address.
The proper way to describe a constant value is DW_OP_constu <const>, DW_OP_stack_value.
Added DW_OP_stack_value to the stack.
-This line, and those below, will be ignored--
M lib/CodeGen/AsmPrinter/DwarfDebug.cpp
A test/DebugInfo/incorrect-variable-debugloc1.ll
llvm-svn: 223981
These methods are only used by MCJIT and are very specific to it. In fact, they
are also fairly specific to the fact that we have a dynamic linker of
relocatable objects.
llvm-svn: 223964
In the large code model we have to first get the address of the GOT entry, load
the address of the constant, and then load the constant itself.
To avoid these loads and the GOT entry alltogether this commit changes the way
how FP constants are materialized in the large code model. The constats are now
materialized in a GPR and then bitconverted/moved into the FPR.
Reviewed by Tim Northover
Fixes rdar://problem/16572564.
llvm-svn: 223941
Add patterns to match SSE (shufpd) and AVX (vpermilpd) shuffle codegen
when storing the high element of a v2f64. The existing patterns were
only checking for an unpckh type of shuffle.
http://llvm.org/bugs/show_bug.cgi?id=21791
Differential Revision: http://reviews.llvm.org/D6586
llvm-svn: 223929
EltsFromConsecutiveLoads was apparently only ever called for 128-bit vectors, and assumed this implicitly. r223518 started calling it for AVX-sized vectors, causing the code path that had this assumption to crash.
This adds a check to make this path fire only for 128-bit vectors.
Differential Revision: http://reviews.llvm.org/D6579
llvm-svn: 223922
As indicated by the tests, it is possible to feed the AsmParser an
invalid datalayout string. We should verify the result of parsing this
string regardless of whether or not we have assertions enabled.
llvm-svn: 223898
We can't mark partially undefined registers, so we have to allow reading
a register in the machine verifier if just parts of a register are
defined.
llvm-svn: 223896
In the subregister liveness tracking case we do not create implicit
reads on partial register writes anymore, still we need to produce a new
SSA value for partial writes so the live segment has to end.
llvm-svn: 223895
Adding the implicit defs/uses to the superregisters is semantically questionable
but was not dangerous before as the register allocator never assigned the same
register to two overlapping LiveIntervals even when the actually live
subregisters do not overlap. With subregister liveness tracking enabled this
does actually happen and leads to subsequent bugs if we don't stop adding
the superregister defs/uses.
llvm-svn: 223892
We used to only combine intrinsics, and turn them into VLD1_UPD/VST1_UPD
when the base pointer is incremented after the load/store.
We can do the same thing for generic load/stores.
Note that we can only combine the first load/store+adds pair in
a sequence (as might be generated for a v16f32 load for instance),
because other combines turn the base pointer addition chain (each
computing the address of the next load, from the address of the last
load) into independent additions (common base pointer + this load's
offset).
Differential Revision: http://reviews.llvm.org/D6585
llvm-svn: 223862
In the current implementation, GCStrategy is a part of the ownership structure for the gc metadata which describes a Module. It also contains a reference to the module in question. As a result, GCStrategy instances are essentially Module specific.
I plan to transition away from this design. Instead, a GCStrategy will be owned by the LLVMContext. It will be a lightweight policy object which contains no information about the Modules or Functions involved, but can be easily reached given a Function.
The first step in this transition is to remove the direct Module reference from GCStrategy. This also requires removing the single user of this reference, the GCMetadataPrinter hierarchy. In theory, this will allow the lifetime of the printers to be scoped to the LLVMContext as well, but in practice, I'm not actually changing that. (Yet?)
An alternate design would have been to move the direct Module reference into the GCMetadataPrinter and change the keying of the owning maps to explicitly key off both GCStrategy and Module. I'm open to doing it that way instead, but didn't see much value in preserving the per Module association for GCMetadataPrinters.
The next change in this sequence will be to start unwinding the intertwined ownership between GCStrategy, GCModuleInfo, and GCFunctionInfo.
Differential Revision: http://reviews.llvm.org/D6566
llvm-svn: 223859
There were two major problems with `MDNode` memory management.
1. `MDNode::operator new()` called a placement array constructor for
`MDOperand`. What? Each operand needs to be placed individually.
2. `MDNode::operator delete()` failed to destruct the `MDOperand`s at
all.
Frankly it's hard to understand how this worked locally, how this
survived an LTO bootstrap, or how it worked on most of the bots.
llvm-svn: 223858
Move the combiner-state check into another function, add a few
small comments, and use a more general type in a cast<>.
In preparation for a future patch.
llvm-svn: 223834
It was missing from the VLD1/VST1 handling logic, even though the
corresponding instructions exist (same form as v2i64).
In preparation for a future patch.
llvm-svn: 223832
RAUW in a deterministic order to try to recover the hexagon bot [1],
whose tests started failing once my GCC fixes were in for r223802.
Otherwise, I'm not sure why tests would fail there and not here.
[1]: http://lab.llvm.org:8011/builders/llvm-hexagon-elf/builds/13426
llvm-svn: 223829
LLVM_EXPLICIT is only supported by recent version of MSVC, and it seems
the not-so-recent versions get confused about the operator bool() when
tryint to resolve operator== calls.
This removed the operator bool()'s since they don't seem to be used
anyway.
llvm-svn: 223824
The load/store value type is currently not available when lowering the memcpy
intrinsic. Add the missing nullptr check to support this in 'computeAddress'.
Fixes rdar://problem/19178947.
llvm-svn: 223818
patterns.
This is causing Clang to miscompile itself for 32-bit x86 somehow, and likely
also on ARM and PPC. I really don't know how, but reverting now that I've
confirmed this is actually the culprit. I have a reproduction as well and so
should be able to restore this shortly.
This reverts commit r223764.
Original commit log follows:
Teach instcombine to canonicalize "element extraction" from a load of an
integer and "element insertion" into a store of an integer into actual
element extraction, element insertion, and vector loads and stores.
Previously various parts of LLVM (including instcombine itself) would
introduce integer loads and stores into the code as a way of opaquely
loading and storing "bits". In some cases (such as a memcpy of
std::complex<float> object) we will eventually end up using those bits
in non-integer types. In order for SROA to effectively promote the
allocas involved, it splits these "store a bag of bits" integer loads
and stores up into the constituent parts. However, for non-alloca loads
and tsores which remain, it uses integer math to recombine the values
into a large integer to load or store.
All of this would be "fine", except that it forces LLVM to go through
integer math to combine and split up values. While this makes perfect
sense for integers (and in fact is critical for bitfields to end up
lowering efficiently) it is *terrible* for non-integer types, especially
floating point types. We have a much more canonical way of representing
the act of concatenating the bits of two SSA values in LLVM: a vector
and insertelement. This patch teaching InstCombine to use this
representation.
With this patch applied, LLVM will no longer introduce integer math into
the critical path of every loop over std::complex<float> operations such
as those that make up the hot path of ... oh, most HPC code, Eigen, and
any other heavy linear algebra library.
For the record, I looked *extensively* at fixing this in other parts of
the compiler, but it just doesn't work:
- We really do want to canonicalize memcpy and other bit-motion to
integer loads and stores. SSA values are tremendously more powerful
than "copy" intrinsics. Not doing this regresses massive amounts of
LLVM's scalar optimizer.
- We really do need to split up integer loads and stores of this form in
SROA or every memcpy of a trivially copyable struct will prevent SSA
formation of the members of that struct. It essentially turns off
SROA.
- The closest alternative is to actually split the loads and stores when
partitioning with SROA, but this has all of the downsides historically
discussed of splitting up loads and stores -- the wide-store
information is fundamentally lost. We would also see performance
regressions for bitfield-heavy code and other places where the
integers aren't really intended to be split without seemingly
arbitrary logic to treat integers totally differently.
- We *can* effectively fix this in instcombine, so it isn't that hard of
a choice to make IMO.
llvm-svn: 223813
Lowering patterns were written through avx512_broadcast_pat multiclass as pattern generates VBROADCAST and COPY_TO_REGCLASS nodes.
Added lowering tests.
llvm-svn: 223804
Split `Metadata` away from the `Value` class hierarchy, as part of
PR21532. Assembly and bitcode changes are in the wings, but this is the
bulk of the change for the IR C++ API.
I have a follow-up patch prepared for `clang`. If this breaks other
sub-projects, I apologize in advance :(. Help me compile it on Darwin
I'll try to fix it. FWIW, the errors should be easy to fix, so it may
be simpler to just fix it yourself.
This breaks the build for all metadata-related code that's out-of-tree.
Rest assured the transition is mechanical and the compiler should catch
almost all of the problems.
Here's a quick guide for updating your code:
- `Metadata` is the root of a class hierarchy with three main classes:
`MDNode`, `MDString`, and `ValueAsMetadata`. It is distinct from
the `Value` class hierarchy. It is typeless -- i.e., instances do
*not* have a `Type`.
- `MDNode`'s operands are all `Metadata *` (instead of `Value *`).
- `TrackingVH<MDNode>` and `WeakVH` referring to metadata can be
replaced with `TrackingMDNodeRef` and `TrackingMDRef`, respectively.
If you're referring solely to resolved `MDNode`s -- post graph
construction -- just use `MDNode*`.
- `MDNode` (and the rest of `Metadata`) have only limited support for
`replaceAllUsesWith()`.
As long as an `MDNode` is pointing at a forward declaration -- the
result of `MDNode::getTemporary()` -- it maintains a side map of its
uses and can RAUW itself. Once the forward declarations are fully
resolved RAUW support is dropped on the ground. This means that
uniquing collisions on changing operands cause nodes to become
"distinct". (This already happened fairly commonly, whenever an
operand went to null.)
If you're constructing complex (non self-reference) `MDNode` cycles,
you need to call `MDNode::resolveCycles()` on each node (or on a
top-level node that somehow references all of the nodes). Also,
don't do that. Metadata cycles (and the RAUW machinery needed to
construct them) are expensive.
- An `MDNode` can only refer to a `Constant` through a bridge called
`ConstantAsMetadata` (one of the subclasses of `ValueAsMetadata`).
As a side effect, accessing an operand of an `MDNode` that is known
to be, e.g., `ConstantInt`, takes three steps: first, cast from
`Metadata` to `ConstantAsMetadata`; second, extract the `Constant`;
third, cast down to `ConstantInt`.
The eventual goal is to introduce `MDInt`/`MDFloat`/etc. and have
metadata schema owners transition away from using `Constant`s when
the type isn't important (and they don't care about referring to
`GlobalValue`s).
In the meantime, I've added transitional API to the `mdconst`
namespace that matches semantics with the old code, in order to
avoid adding the error-prone three-step equivalent to every call
site. If your old code was:
MDNode *N = foo();
bar(isa <ConstantInt>(N->getOperand(0)));
baz(cast <ConstantInt>(N->getOperand(1)));
bak(cast_or_null <ConstantInt>(N->getOperand(2)));
bat(dyn_cast <ConstantInt>(N->getOperand(3)));
bay(dyn_cast_or_null<ConstantInt>(N->getOperand(4)));
you can trivially match its semantics with:
MDNode *N = foo();
bar(mdconst::hasa <ConstantInt>(N->getOperand(0)));
baz(mdconst::extract <ConstantInt>(N->getOperand(1)));
bak(mdconst::extract_or_null <ConstantInt>(N->getOperand(2)));
bat(mdconst::dyn_extract <ConstantInt>(N->getOperand(3)));
bay(mdconst::dyn_extract_or_null<ConstantInt>(N->getOperand(4)));
and when you transition your metadata schema to `MDInt`:
MDNode *N = foo();
bar(isa <MDInt>(N->getOperand(0)));
baz(cast <MDInt>(N->getOperand(1)));
bak(cast_or_null <MDInt>(N->getOperand(2)));
bat(dyn_cast <MDInt>(N->getOperand(3)));
bay(dyn_cast_or_null<MDInt>(N->getOperand(4)));
- A `CallInst` -- specifically, intrinsic instructions -- can refer to
metadata through a bridge called `MetadataAsValue`. This is a
subclass of `Value` where `getType()->isMetadataTy()`.
`MetadataAsValue` is the *only* class that can legally refer to a
`LocalAsMetadata`, which is a bridged form of non-`Constant` values
like `Argument` and `Instruction`. It can also refer to any other
`Metadata` subclass.
(I'll break all your testcases in a follow-up commit, when I propagate
this change to assembly.)
llvm-svn: 223802
replaceDbgDeclareForAlloca() replaces an alloca by a value storing the
address of what was the alloca. If there is a dbg.declare corresponding
to that alloca, we need to lower it to a dbg.value describing the additional
dereference operation to be performed to get to the underlying variable.
This is done by adding a DW_OP_deref to the complex location part of the
location description. This deref was added to the end of the operation list,
which is wrong. The expression applies to what is described by the
dbg.{declare,value}, and as we are changing this, we need to apply the
DW_OP_deref as the first operation in the list.
Part of the fix for rdar://19162268.
llvm-svn: 223799
Rewrite the pattern match code to work also with Values instead with
Instructions only. Also remove the no longer need matcher (m_Instruction).
llvm-svn: 223797
With the foregoing three patches, VSX instructions can be used for
little endian. This patch removes the restriction that prevented
this, and re-enables the test cases from the first three patches.
llvm-svn: 223792
When performing instruction selection for ISD::VECTOR_SHUFFLE, there
is special code for handling v2f64 and v2i64 using VSX instructions.
This code must be adjusted for little-endian. Because the two inputs
are treated as a double-wide register, we must swap their order for
little endian. To get the appropriate mask elements to use with the
big-endian biased XXPERMDI instruction, we must reverse their order
and invert the bits.
A new test is added to test the 16 possible values of the shuffle
mask. It is initially disabled for reasons specified in the test. It
is re-enabled by patch 4/4.
llvm-svn: 223791
For little endian, we need to make some straightforward adjustments in
the code expansions for scalar_to_vector and vector_extract of v2f64.
First, scalar_to_vector must place the scalar into vector element
zero. However, our implementation of SUBREG_TO_REG will place it into
big-element vector element zero (high-order bits), and for little
endian we need it in the low-order bits. The LE implementation splats
the high-order doubleword into the low-order doubleword.
Second, the meaning of (vector_extract x, 0) and (vector_extract x, 1)
must be reversed for similar reasons.
A new test is added that tests code generation for insertelement and
extractelement for both element 0 and element 1. It is disabled in
this patch but enabled in patch 4/4, for reasons stated in the test.
llvm-svn: 223788
This optimization transforms code like:
bb1:
%0 = icmp ne i32 %a, 0
%1 = icmp ne i32 %b, 0
%or.cond = or i1 %0, %1
br i1 %or.cond, label %TrueBB, label %FalseBB
into a multiple branch instructions like:
bb1:
%0 = icmp ne i32 %a, 0
br i1 %0, label %TrueBB, label %bb2
bb2:
%1 = icmp ne i32 %b, 0
br i1 %1, label %TrueBB, label %FalseBB
This optimization is already performed by SelectionDAG, but not by FastISel.
FastISel cannot perform this optimization, because it cannot generate new
MachineBasicBlocks.
Performing this optimization at CodeGenPrepare time makes it available to both -
SelectionDAG and FastISel - and the implementation in SelectiuonDAG could be
removed. There are currenty a few differences in codegen for X86 and PPC, so
this commmit only enables it for FastISel.
Reviewed by Jim Grosbach
This fixes rdar://problem/19034919.
llvm-svn: 223786
This patch addresses the inherent big-endian bias in the lxvd2x,
lxvw4x, stxvd2x, and stxvw4x instructions. These instructions load
vector elements into registers left-to-right (with the first element
loaded into the high-order bits of the register), regardless of the
endian setting of the processor. However, these are the only
vector memory instructions that permit unaligned storage accesses, so
we want to use them for little-endian.
To make this work, a lxvd2x or lxvw4x is replaced with an lxvd2x
followed by an xxswapd, which swaps the doublewords. This works for
lxvw4x as well as lxvd2x, because for lxvw4x on an LE system the
vector elements are in LE order (right-to-left) within each
doubleword. (Thus after lxvw2x of a <4 x float> the elements will
appear as 1, 0, 3, 2. Following the swap, they will appear as 3, 2,
0, 1, as desired.) For stores, an stxvd2x or stxvw4x is replaced
with an stxvd2x preceded by an xxswapd.
Introduction of extra swap instructions provides correctness, but
obviously is not ideal from a performance perspective. Future patches
will address this with optimizations to remove most of the introduced
swaps, which have proven effective in other implementations.
The introduction of the swaps is performed during lowering of LOAD,
STORE, INTRINSIC_W_CHAIN, and INTRINSIC_VOID operations. The latter
are used to translate intrinsics that specify the VSX loads and stores
directly into equivalent sequences for little endian. Thus code that
uses vec_vsx_ld and vec_vsx_st does not have to be modified to be
ported from BE to LE.
We introduce new PPCISD opcodes for LXVD2X, STXVD2X, and XXSWAPD for
use during this lowering step. In PPCInstrVSX.td, we add new SDType
and SDNode definitions for these (PPClxvd2x, PPCstxvd2x, PPCxxswapd).
These are recognized during instruction selection and mapped to the
correct instructions.
Several tests that were written to use -mcpu=pwr7 or pwr8 are modified
to disable VSX on LE variants because code generation changes with
this and subsequent patches in this set. I chose to include all of
these in the first patch than try to rigorously sort out which tests
were broken by one or another of the patches. Sorry about that.
The new test vsx-ldst-builtin-le.ll, and the changes to vsx-ldst.ll,
are disabled until LE support is enabled because of breakages that
occur as noted in those tests. They are re-enabled in patch 4/4.
llvm-svn: 223783
Instead, walk the obj symbol list in parallel to find the GV. This shouldn't
change anything on ELF where global symbols are not mangled, but it is a step
toward supporting other object formats.
Gold itself is ELF only, but bfd ld supports COFF and the logic in the gold
plugin could be reused on lld.
llvm-svn: 223780
missing barcelona CPU which that test uncovered, and remove the 32-bit
x86 CPUs which I really wasn't prepared to audit and test thoroughly.
If anyone wants to clean up the 32-bit only x86 CPUs, go for it.
Also, if anyone else wants to try to de-duplicate the AMD CPUs, that'd
be cool, but from the looks of it wouldn't save as much as it did for
the Intel CPUs.
llvm-svn: 223774
Instructions of the form [ADD Rd, pc, #imm] are manually aliased
in processInstruction() to use ADR. To accomodate this, mod_imm handling
had to be tweaked a bit. Turns out it was the manual aliasing that must
be tweaked to accommodate mod_imms instead. More information about the
parsed instruction is available at the point where processInstruction()
is invoked, which makes it easier to detect a mod_imm at that point rather
than trying to detect a potential alias when a mod_imm is being prepped.
Added a test case and fixed some white spaces as well.
llvm-svn: 223772
Notably, this adds simple micro-architecture names for the Intel CPU
variants, and defines the old 'core'-based names as aliases. GCC has
started to simplify their documented interface to use these names as
well, so it seems like we can start to converge on a consistent pattern.
I'd appreciate Intel double checking the entries that aren't yet
documented widely, especially Atom (Bonnell and Silvermont), Knights
Landing, and Skylake. But this change shouldn't break any existing
users.
Also, ran clang-format to re-format this code and it actually worked
(modulo a tiny bug) so hopefully we can start to stop thinking about
formatting this stuff.
llvm-svn: 223769
integer and "element insertion" into a store of an integer into actual
element extraction, element insertion, and vector loads and stores.
Previously various parts of LLVM (including instcombine itself) would
introduce integer loads and stores into the code as a way of opaquely
loading and storing "bits". In some cases (such as a memcpy of
std::complex<float> object) we will eventually end up using those bits
in non-integer types. In order for SROA to effectively promote the
allocas involved, it splits these "store a bag of bits" integer loads
and stores up into the constituent parts. However, for non-alloca loads
and tsores which remain, it uses integer math to recombine the values
into a large integer to load or store.
All of this would be "fine", except that it forces LLVM to go through
integer math to combine and split up values. While this makes perfect
sense for integers (and in fact is critical for bitfields to end up
lowering efficiently) it is *terrible* for non-integer types, especially
floating point types. We have a much more canonical way of representing
the act of concatenating the bits of two SSA values in LLVM: a vector
and insertelement. This patch teaching InstCombine to use this
representation.
With this patch applied, LLVM will no longer introduce integer math into
the critical path of every loop over std::complex<float> operations such
as those that make up the hot path of ... oh, most HPC code, Eigen, and
any other heavy linear algebra library.
For the record, I looked *extensively* at fixing this in other parts of
the compiler, but it just doesn't work:
- We really do want to canonicalize memcpy and other bit-motion to
integer loads and stores. SSA values are tremendously more powerful
than "copy" intrinsics. Not doing this regresses massive amounts of
LLVM's scalar optimizer.
- We really do need to split up integer loads and stores of this form in
SROA or every memcpy of a trivially copyable struct will prevent SSA
formation of the members of that struct. It essentially turns off
SROA.
- The closest alternative is to actually split the loads and stores when
partitioning with SROA, but this has all of the downsides historically
discussed of splitting up loads and stores -- the wide-store
information is fundamentally lost. We would also see performance
regressions for bitfield-heavy code and other places where the
integers aren't really intended to be split without seemingly
arbitrary logic to treat integers totally differently.
- We *can* effectively fix this in instcombine, so it isn't that hard of
a choice to make IMO.
Differential Revision: http://reviews.llvm.org/D6548
llvm-svn: 223764
This is a revert of r223521 in spirit, if not in content. I am not
sure why declarations ended up in LazilyLinkGlobalValues in the first
place; that will take some more investigation.
llvm-svn: 223763
This handles the simplest case for mov -> push conversion:
1. x86-32 calling convention, everything is passed through the stack.
2. There is no reserved call frame.
3. Only registers or immediates are pushed, no attempt to combine a mem-reg-mem sequence into a single PUSHmm.
Differential Revision: http://reviews.llvm.org/D6503
llvm-svn: 223757
CodeGen/PowerPC/vsx-p8.ll was failing.
'+power8-vector' is not a recognized feature for this target (ignoring feature)
llvm/test/CodeGen/PowerPC/vsx-p8.ll:33:14: error: expected string not found in input
; CHECK-REG: lxvw4x 34, 0, 3
^
<stdin>:50:2: note: scanning from here
.align 3
^
<stdin>:61:2: note: possible intended match here
lvx 3, 0, 3
^
llvm-svn: 223729
The aggressive anti-dep breaker, used by the PowerPC backend during post-RA
scheduling (but is available to all targets), did not handle early-clobber MI
operands (at all). When constructing the list of available registers for the
replacement of some def operand, check the using instructions, and remove
registers assigned to early-clobbered defs from the set.
Fixes PR21452.
llvm-svn: 223727
This fixes an issue with ScheduleDAGInstrs::buildSchedGraph
where stores without an underlying object would not be added
as a predecessor to the current BarrierChain.
llvm-svn: 223717
GCC accepts 'cc' as an alias for 'cr0', and we need to do the same when
processing inline asm constraints. This had previously been implemented using a
non-allocatable register, named 'cc', that was listed as an alias of 'cr0', but
the infrastructure does not seem to support this properly (neither the register
allocator nor the scheduler properly accounts for the alias). Instead, we can
just process this as a naming alias inside of the inline asm
constraint-processing code, so we'll do that instead.
There are two regression tests, one where the post-RA scheduler did the wrong
thing with the non-allocatable alias, and one where the register allocator did
the wrong thing. Fixes PR21742.
llvm-svn: 223708
We were already lazily linking functions, but all GlobalValues can be treated
uniformly for this.
The test updates are to ensure that a given GlobalValue is still linked in.
This fixes pr21494.
llvm-svn: 223681
Fix a compact unwind encoding logic bug which would try to encode
more callee saved registers than it should, leading to early bail out
in the encoding logic and abusive use of DWARF frame mode unnecessarily.
Also remove no-compact-unwind.ll which was testing the wrong thing
based on this bug and move it to valid 'compact unwind' tests. Added
other few more tests too.
llvm-svn: 223676
Introduce the ``llvm.instrprof_increment`` intrinsic and the
``-instrprof`` pass. These provide the infrastructure for writing
counters for profiling, as in clang's ``-fprofile-instr-generate``.
The implementation of the instrprof pass is ported directly out of the
CodeGenPGO classes in clang, and with the followup in clang that rips
that code out to use these new intrinsics this ends up being NFC.
Doing the instrumentation this way opens some doors in terms of
improving the counter performance. For example, this will make it
simple to experiment with alternate lowering strategies, and allows us
to try handling profiling specially in some optimizations if we want
to.
Finally, this drastically simplifies the frontend and puts all of the
lowering logic in one place.
llvm-svn: 223672
Teach ISel how to match a TZCNT/LZCNT from a conditional move if the
condition code is X86_COND_NE.
Existing tablegen patterns only allowed to match TZCNT/LZCNT from a
X86cond with condition code equal to X86_COND_E. To avoid introducing
extra rules, I added an 'ImmLeaf' definition that checks if the
condition code is COND_E or COND_NE.
llvm-svn: 223668
Before this patch, the backend sub-optimally expanded the non-constant shift
count of a v8i16 shift into a sequence of two 'movd' plus 'movzwl'.
With this patch the backend checks if the target features sse4.1. If so, then
it lets the shuffle legalizer deal with the expansion of the shift amount.
Example:
;;
define <8 x i16> @test(<8 x i16> %A, <8 x i16> %B) {
%shamt = shufflevector <8 x i16> %B, <8 x i16> undef, <8 x i32> zeroinitializer
%shl = shl <8 x i16> %A, %shamt
ret <8 x i16> %shl
}
;;
Before (with -mattr=+avx):
vmovd %xmm1, %eax
movzwl %ax, %eax
vmovd %eax, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
Now:
vpxor %xmm2, %xmm2, %xmm2
vpblendw $1, %xmm1, %xmm2, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
llvm-svn: 223660
X86ISelLowering.cpp has a long switch for intrinsics. I moved a part of
this long switch to the new intrinsics table in X86IntrinsicsInfo.h.
No functional changes, just code and compile time optimization.
llvm-svn: 223641
r223618 including special handling of `MDNode::intersect()`: if the
first operand is a self-reference with the same operands you're trying
to return, return it instead.
Reuse that handling in `MDNode::concatenate()` in the hopes that it
fixes a polly test that seems to rely on the old behaviour [1].
[1]: http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25167
llvm-svn: 223619
It doesn't make sense to unique self-referencing nodes. Drop uniquing
for them.
Note that `MDNode::intersect()` occasionally returns self-referencing
nodes. Previously these would be returned by `MDNode::get()`. I'm not
convinced this was intended behaviour -- to me it seems it should return
a node whose only operand is the self-reference -- but I don't know much
about alias scopes so I'm preserving it for now.
This is part of PR21532.
llvm-svn: 223618
Add assembly and bitcode tests that I neglected to add in r223564 (IR:
Disallow complicated function-local metadata) and r223574 (IR: Disallow
function-local metadata attachments).
Found a couple of bugs:
- The error message for function-local attachments gave the wrong line
number -- it indicated the next token (typically on the next line)
instead of the token that started the attachment. Fixed.
- Metadata arguments of the form `!{i32 0, i32 %v}` (or with the
arguments reversed) fired an assertion in `ValueEnumerator` in LLVM
v3.5, so I suppose this never really worked. I suppose this was
"fixed" by r223564.
(Thanks to dblaikie for pointing out my omission.)
Part of PR21532.
llvm-svn: 223616
There are 3 changes:
- Convert 32-bit S_LSHL/LSHR/ASHR to their V_*REV variants for VI
- Lower RSQ_CLAMP for VI
- Don't generate MIN/MAX_LEGACY on VI
llvm-svn: 223604
DenseSet used to be implemented as DenseMap<Key, char>, which usually doubled
the memory footprint of the map. Now we use a compressed set so the second
element uses no memory at all. This required some surgery on DenseMap as
all accesses to the bucket now have to go through methods; this should
have no impact on the behavior of DenseMap though. The new default bucket
type for DenseMap is a slightly extended std::pair as we expose it through
DenseMap's iterator and don't want to break any existing users.
llvm-svn: 223588
Consider:
void f() {}
void __attribute__((weak)) g() {}
bool b = &f != &g;
It's possble for g to resolve to f if --defsym=g=f is passed on to the
linker.
llvm-svn: 223585
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
SimplifyCFG currently does this transformation, but I'm working towards changing
that so we can optimize harder based on unreachable defaults.
Differential Revision: http://reviews.llvm.org/D6510
llvm-svn: 223566
Disallow complex types of function-local metadata. The only valid
function-local metadata is an `MDNode` whose sole argument is a
non-metadata function-local value.
Part of PR21532.
llvm-svn: 223564
Fix the poor codegen seen in PR21710 ( http://llvm.org/bugs/show_bug.cgi?id=21710 ).
Before we crack 32-byte build vectors into smaller chunks (and then subsequently
glue them back together), we should look for the easy case where we can just load
all elements in a single op.
An example of the codegen change is:
From:
vmovss 16(%rdi), %xmm1
vmovups (%rdi), %xmm0
vinsertps $16, 20(%rdi), %xmm1, %xmm1
vinsertps $32, 24(%rdi), %xmm1, %xmm1
vinsertps $48, 28(%rdi), %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
retq
To:
vmovups (%rdi), %ymm0
retq
Differential Revision: http://reviews.llvm.org/D6536
llvm-svn: 223518
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
Test Plan: test/CodeGen/X86/frameaddr.ll
Reviewers: dschuff, nadav
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6514
llvm-svn: 223510
This patch adds VSX floating point loads and stores to fastisel.
Along with the change to tablegen (D6220), VSX instructions are now fully supported in fastisel.
http://reviews.llvm.org/D6274
llvm-svn: 223507
SSE2/AVX non-constant packed shift instructions only use the lower 64-bit of
the shift count.
This patch teaches function 'getTargetVShiftNode' how to deal with shifts
where the shift count node is of type MVT::i64.
Before this patch, function 'getTargetVShiftNode' only knew how to deal with
shift count nodes of type MVT::i32. This forced the backend to wrongly
truncate the shift count to MVT::i32, and then zero-extend it back to MVT::i64.
llvm-svn: 223505
When a loop gets bundled up, its outgoing edges are quite large, and can
just barely overflow 64-bits. If one successor has multiple incoming
edges -- and that successor is getting all the incoming mass --
combining just its edges can overflow. Handle that by saturating rather
than asserting.
This fixes PR21622.
llvm-svn: 223500
Required some APInt massaging to get proper empty/tombstone values. Apart
from making the code a bit simpler this also reduces the bucket size of
the ConstantInt map from 32 to 24 bytes.
llvm-svn: 223478
Do not realign origin address if the corresponding application
address is at least 4-byte-aligned.
Saves 2.5% code size in track-origins mode.
llvm-svn: 223464
When lowering a vector shift node, the backend checks if the shift count is a
shuffle with a splat mask. If so, then it introduces an extra dag node to
extract the splat value from the shuffle. The splat value is then used
to generate a shift count of a target specific shift.
However, if we know that the shift count is a splat shuffle, we can use the
splat index 'I' to extract the I-th element from the first shuffle operand.
The advantage is that the splat shuffle may become dead since we no longer
use it.
Example:
;;
define <4 x i32> @example(<4 x i32> %a, <4 x i32> %b) {
%c = shufflevector <4 x i32> %b, <4 x i32> undef, <4 x i32> zeroinitializer
%shl = shl <4 x i32> %a, %c
ret <4 x i32> %shl
}
;;
Before this patch, llc generated the following code (-mattr=+avx):
vpshufd $0, %xmm1, %xmm1 # xmm1 = xmm1[0,0,0,0]
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
With this patch, the redundant splat operation is removed from the code.
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
llvm-svn: 223461
The test file test/CodeGen/ARM/build-attributes.ll was missing several
floating-point build attribute tests. The intention of this commit is that for
each CPU / architecture currently tested, there are now tests that make sure
the following attributes are sufficiently checked,
* Tag_ABI_FP_rounding
* Tag_ABI_FP_denormal
* Tag_ABI_FP_exceptions
* Tag_ABI_FP_user_exceptions
* Tag_ABI_FP_number_model
Also in this commit, the -unsafe-fp-math flag has been augmented with the full
suite of flags Clang sends to LLVM when you pass -ffast-math to Clang. That is,
`-unsafe-fp-math' has been changed to `-enable-unsafe-fp-math -disable-fp-elim
-enable-no-infs-fp-math -enable-no-nans-fp-math -fp-contract=fast'
Change-Id: I35d766076bcbbf09021021c0a534bf8bf9a32dfc
llvm-svn: 223454
Reverting this because, while it fixes the problem in the reduced test case, it
does not fix the problem in the full test case from the bug report.
llvm-svn: 223442
The scheduling dependency graph is built bottom-up within each scheduling
region, and ScheduleDAGInstrs::addPhysRegDeps is called to add output/anti
dependencies, based on physical registers, to the SUs for instructions
based on those that come before them.
In the test case, we start before post-RA scheduling with a block that looks
like this:
...
INLINEASM <...
andc $0,$0,$2
stdcx. $0,0,$3
bne- 1b
> [sideeffect] [mayload] [maystore] [attdialect], $0:[regdef-ec:G8RC], %X6<earlyclobber,def,dead>, $1:[mem], %X3<kill>, $2:[reguse:G8RC], %X5<kill>, $3:[reguse:G8RC], %X3, $4:[mem], %X3, $5:[clobber], %CC<earlyclobber,imp-def,dead>, <<badref>>
...
%X4<def,dead> = ANDIo8 %X4<kill>, 1, %CR0<imp-def,dead>, %CR0GT<imp-def>
...
%R29<def> = ISEL %R3<undef>, %R4<kill>, %CR0GT<kill>
where it is relevant that %CC is an alias to %CR0, and that %CR0GT is a
subregister of %CR0. However, for post-RA scheduling, no dependency was added
to prevent the INLINEASM from being scheduled in between the ANDIo8 and the
ISEL (which communicate via the %CR0GT register).
In ScheduleDAGInstrs::addPhysRegDeps, when called for the %CC operand, we'd
iterate over all of its aliases (which include %CC itself and also %CR0), and
look for previously-encountered defs of those registers. We'd find the ANDIo8,
but decide not to add a dependency between the INLINEASM and the ANDIo8 because
both the INLINEASM's def of %CC is dead, and also the ANDIo8 def of %CR0 is
dead. This ignores, however, that ANDIo8 has a non-dead def of %CR0GT, a
subregister of %CR0, and thus a dependency still must exist.
To fix this problem, when calling registerDefIsDead on the SU with the def, we
also check all subregisters for possible non-dead defs, and add the dependency
if any are found.
Fixes PR21742.
llvm-svn: 223440
no DWARF register number mapping, or if the register was a virtual
register that was never materialized. Previously, we would just emit a
bogus location, after this patch we don't emit a location at all by
doing an early exit.
After my bugfix in r223401 today, this doesn't actually happen on any
target that I tested this with, but it's still preferable to make the
possibility of a failure explicit.
llvm-svn: 223428
r32900 introduced custom lowering for fcopysign, with two checks to
change the magnitude value's type if it's larger/smaller than the sign
value's type. r32932 replaced that code for the smaller case.
r43205 did the same for the larger case, but left the old code, now dead.
llvm-svn: 223415
r223113 added support for ARM modified immediate assembly syntax. Which
assumes all immediate operands are prefixed with a '#'. This assumption
is wrong as per the ARMARM - which recommends that all '#' characters be
treated optional. The current patch fixes this regression and adds a test
case. A follow-up patch will expand the test coverage to other instructions.
llvm-svn: 223381
So there are a couple of issues with indirect calls on thumbv4t. First, the most
'obvious' instruction, 'blx' isn't available until v5t. And secondly, the
next-most-obvious sequence: 'mov lr, pc; bx rN' doesn't DTRT in thumb code
because the saved off pc has its thumb bit cleared, so when the callee returns
we end up in ARM mode.... yuck.
The solution is to 'bl' to a nearby landing pad with a 'bx rN' in it.
We could cut down on code size by sharing the landing pads between call sites
that are close enough, but for the moment let's do correctness first and look at
performance later.
Patch by: Iain Sandoe
http://reviews.llvm.org/D6519
llvm-svn: 223380
Reapply r223347, with a fix to not crash on uninserted instructions (or more
precisely, instructions in uninserted blocks). bugpoint was able to reduce the
test case somewhat, but it is still somewhat large (and relies on setting
things up to be simplified during inlining), so I've not included it here.
Nevertheless, it is clear what is going on and why.
Original commit message:
Restrict somewhat the memory-allocation pointer cmp opt from r223093
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
llvm-svn: 223371
This bug has the effect of converting a test of isGCRelocate(InvokeInst*) from a false return to a crash.
This may be the root cause of the crash Joerg reported against r223137, but I'm still waiting for a clean build of clang to complete to be able to confirm. Once I've confirmed the issue, I'll submit a test case separately.
llvm-svn: 223370
r223113 added support for ARM modified immediate assembly syntax. That patch
has broken support for immediate expressions, as in:
add r0, #(4 * 4)
It wasn't caught because we don't have any tests for this feature. This patch
fixes this regression and adds test cases.
llvm-svn: 223366
The current DAG combine turns a sequence of extracts from <4 x i32> followed by zexts into a store followed by scalar loads.
According to measurements by Martin Krastev (see PR 21269) for x86-64, a sequence of an extract, movs and shifts gives better performance. However, for 32-bit x86, the previous sequence still seems better.
Differential Revision: http://reviews.llvm.org/D6501
llvm-svn: 223360
Replaced some logic that checked if a build_vector node is doing a splat of a
non-undef value with a call to method BuildVectorSDNode::getSplatValue().
No functional change intended.
llvm-svn: 223354
According to a previous FIXME comment we now not only look at MBB
successors, but also handle code sinking past them:
x = computation
if () {} else {}
use x
The instruction could be sunk over the whole diamond for the
if/then/else (or loop, etc), allowing it to be sunk into other blocks
after that.
Modified test added in r204522, due to one spill less present.
Minor fixes in comments.
Patch provided by Jonas Paulsson. Reviewed by Hal Finkel.
llvm-svn: 223350
Added instcombine optimizations for BSWAP with AND/OR/XOR ops:
OP( BSWAP(x), BSWAP(y) ) -> BSWAP( OP(x, y) )
OP( BSWAP(x), CONSTANT ) -> BSWAP( OP(x, BSWAP(CONSTANT) ) )
Since its just a one liner, I've also added BSWAP to the DAGCombiner equivalent as well:
fold (OP (bswap x), (bswap y)) -> (bswap (OP x, y))
Refactored bswap-fold tests to use FileCheck instead of just checking that the bswaps had gone.
Differential Revision: http://reviews.llvm.org/D6407
llvm-svn: 223349
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 223348
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
llvm-svn: 223347
Summary: Add rpath load command support in Mach-O object and update llvm-objdump to use it.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6512
llvm-svn: 223343
Commit on
- This patch fixes the bug described in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-May/062343.html
The fix allocates an extra slot just below the GPRs and stores the base pointer
there. This is done only for functions containing llvm.eh.sjlj.setjmp that also
need a base pointer. Because code containing llvm.eh.sjlj.setjmp saves all of
the callee-save GPRs in the prologue, the offset to the extra slot can be
computed before prologue generation runs.
Impact at run-time on affected functions is::
- One extra store in the prologue, The store saves the base pointer.
- One extra load after a llvm.eh.sjlj.setjmp. The load restores the base pointer.
Because the extra slot is just above a gap between frame-pointer-relative and
base-pointer-relative chunks of memory, there is no impact on other offset
calculations other than ensuring there is room for the extra slot.
http://reviews.llvm.org/D6388
Patch by Arch Robison <arch.robison@intel.com>
llvm-svn: 223329
We had mistakenly believed that GCC's 'cc' referred to the entire
condition-code register (cr0 through cr7) -- and implemented this in r205630 to
fix PR19326, but 'cc' is actually an alias only to 'cr0'. This is causing LLVM
to clobber too much with legacy code with inline asm using the 'cc' clobber.
Fixes PR21451.
llvm-svn: 223328
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
llvm-svn: 223323
This is simply a grab bag of unrelated checks:
- A statepoint call can't be marked readonly or readnone
- We don't currently support inline asm or varadic target functions. Both could be supported, but don't currently work.
- I forgot to check that the number of call arguments actually matched the wrapped callee in my previous change. Included here.
llvm-svn: 223322
On PowerPC, inline asm memory operands might be expanded as 0($r), where $r is
a register containing the address. As a result, this register cannot be r0, and
we need to enforce this register subclass constraint to prevent miscompiling
the code (we'd get this constraint for free with the usual instruction
definitions, but that scheme has no knowledge of how we end up printing inline
asm memory operands, and so here we need to do it 'by hand'). We can accomplish
this within the current address-mode selection framework by introducing an
explicit COPY_TO_REGCLASS node.
Fixes PR21443.
llvm-svn: 223318
Prior to this commit, physical registers defined implicitly were considered free
right after their definition, i.e.. like dead definitions. Therefore, their uses
had to immediately follow their definitions, otherwise the related register may
be reused to allocate a virtual register.
This commit fixes this assumption by keeping implicit definitions alive until
they are actually used. The downside is that if the implicit definition was dead
(and not marked at such), we block an otherwise available register. This is
however conservatively correct and makes the fast register allocator much more
robust in particular regarding the scheduling of the instructions.
Fixes PR21700.
llvm-svn: 223317
The non-opaque part can be structurally uniqued. To keep this to just
a hash lookup, we don't try to unique cyclic types.
Also change the type mapping algorithm to be optimistic about a type
not being recursive and only create a new type when proven to be wrong.
This is not as strong as trying to speculate that we can keep the source
type, but is simpler (no speculation to revert) and more powerfull
than what we had before (we don't copy non-recursive types at least).
I initially wrote this to try to replace the name based type merging.
It is not strong enough to replace it, but is is a useful addition.
With this patch the number of named struct types is a clang lto bootstrap goes
from 49674 to 15986.
llvm-svn: 223278
Add checks that the types in a gc.statepoint sequence match the wrapper callee and that relocating a pointer doesn't change it's type.
llvm-svn: 223275
This allows cases like float x; fmin(1.0, x); to be optimized to fminf(1.0f, x);
rdar://19049359
Differential Revision: http://reviews.llvm.org/D6496
llvm-svn: 223270
The recently added documentation for statepoints claimed that we checked the parameters of the various intrinsics for validity. This patch adds the code to actually do so. I also removed a couple of redundant checks for conditions which are checked elsewhere in the Verifier and simplified the logic using the helper functions from Statepoint.h.
llvm-svn: 223259
This change makes MemorySanitizer instrumentation a bit more strict
about instructions that have no origin id assigned to them.
This would have caught the bug that was fixed in r222918.
This is re-commit of r222997, reverted in r223211, with 3 more
missing origins added.
llvm-svn: 223236
Try to convert two compares of a signed range check into a single unsigned compare.
Examples:
(icmp sge x, 0) & (icmp slt x, n) --> icmp ult x, n
(icmp slt x, 0) | (icmp sgt x, n) --> icmp ugt x, n
llvm-svn: 223224
Almost all immediates in PowerPC assembly (both 32-bit and 64-bit) are signed
numbers, and it is important that we print them as such. To make sure that
happens, we change PPCTargetLowering::LowerAsmOperandForConstraint so that it
does all intermediate checks on a signed-extended int64_t value, and then
creates the resulting target constant using MVT::i64. This will ensure that all
negative values are printed as negative values (mirroring what is done in other
backends to achieve the same sign-extension effect).
This came up in the context of inline assembly like this:
"add%I2 %0,%0,%2", ..., "Ir"(-1ll)
where we used to print:
addi 3,3,4294967295
and gcc would print:
addi 3,3,-1
and gas accepts both forms, but our builtin assembler (correctly) does not. Now
we print -1 like gcc does.
While here, I replaced a bunch of custom integer checks with isInt<16> and
friends from MathExtras.h.
Thanks to Paul Hargrove for the bug report.
llvm-svn: 223220
LLVM understands a -enable-sign-dependent-rounding-fp-math codegen option. When
the user has specified this option, the Tag_ABI_FP_rounding attribute should be
emitted with value 1. This option currently does not appear to disable
transformations and optimizations that assume default floating point rounding
behavior, AFAICT, but the intention should be recorded in the build attributes,
regardless of what the compiler actually does with the intention.
Change-Id: If838578df3dc652b6f2796b8d152545674bcb30e
llvm-svn: 223218
When lazy reading a module, the types used in a function will not be visible to
a TypeFinder until the body is read.
This patch fixes that by asking the module for its identified struct types.
If a materializer is present, the module asks it. If not, it uses a TypeFinder.
This fixes pr21374.
I will be the first to say that this is ugly, but it was the best I could find.
Some of the options I looked at:
* Asking the LLVMContext. This could be made to work for gold, but not currently
for ld64. ld64 will load multiple modules into a single context before merging
them. This causes us to see types from future merges. Unfortunately,
MappedTypes is not just a cache when it comes to opaque types. Once the
mapping has been made, we have to remember it for as long as the key may
be used. This would mean moving MappedTypes to the Linker class and having
to drop the Linker::LinkModules static methods, which are visible from C.
* Adding an option to ignore function bodies in the TypeFinder. This would
fix the PR by picking the worst result. It would work, but unfortunately
we are currently quite dependent on the upfront type merging. I will
try to reduce our dependency, but it is not clear that we will be able
to get rid of it for now.
The only clean solution I could think of is making the Module own the types.
This would have other advantages, but it is a much bigger change. I will
propose it, but it is nice to have this fixed while that is discussed.
With the gold plugin, this patch takes the number of types in the LTO clang
binary from 52817 to 49669.
llvm-svn: 223215
Remove an unnecessary `MDNode::replaceAllUsesWith()`. In the preceding
line, `TheLoop->setLoopID()` visits all backedges and sets the new loop
ID. This sufficiently updates the loop metadata.
Metadata RAUW is going away as part of PR21532.
llvm-svn: 223210
Select i1 logical ops directly to 64-bit SALU instructions.
Vector i1 values are always really in SGPRs, with each
bit for each item in the wave. This saves about 4 instructions
when and/or/xoring any condition, and also helps write conditions
that need to be passed in vcc.
This should work correctly now that the SGPR live range
fixing pass works. More work is needed to eliminate the VReg_1
pseudo regclass and possibly the entire SILowerI1Copies pass.
llvm-svn: 223206
The loop is over the operands of an instruction, and checks the
register with the sub reg index of the dest register. This probably
meant to be checking the sub reg index of the same operand.
llvm-svn: 223205
m0 is treated as a virtual register class with a single register
rather than the physical register it really is. This was updating
the live range of the used virtual copy of m0 from the first ds_read
instruction, and leaving the unused copy unchanged. This resulted in a
"Live segment doesn't end at a valid instruction" verifier error because
the erased instructions. Update the live range of the second copy (which
should be dead).
No test since I'm not sure how to trigger this with SIFoldOperands
enabled.
llvm-svn: 223203
We were assuming that each back-edge in a region represented a unique
loop, which is not always the case. We need to use LoopInfo to
correctly determine which back-edges are loops.
llvm-svn: 223199
We just needed to remove the assertion in
AMDGPURegisterInfo::getFrameRegister(), which is called when
initializing the parser for inline assembly.
llvm-svn: 223197
Patch by Ben Gamari!
This redefines the `prefix` attribute introduced previously and
introduces a `prologue` attribute. There are a two primary usecases
that these attributes aim to serve,
1. Function prologue sigils
2. Function hot-patching: Enable the user to insert `nop` operations
at the beginning of the function which can later be safely replaced
with a call to some instrumentation facility
3. Runtime metadata: Allow a compiler to insert data for use by the
runtime during execution. GHC is one example of a compiler that
needs this functionality for its tables-next-to-code functionality.
Previously `prefix` served cases (1) and (2) quite well by allowing the user
to introduce arbitrary data at the entrypoint but before the function
body. Case (3), however, was poorly handled by this approach as it
required that prefix data was valid executable code.
Here we redefine the notion of prefix data to instead be data which
occurs immediately before the function entrypoint (i.e. the symbol
address). Since prefix data now occurs before the function entrypoint,
there is no need for the data to be valid code.
The previous notion of prefix data now goes under the name "prologue
data" to emphasize its duality with the function epilogue.
The intention here is to handle cases (1) and (2) with prologue data and
case (3) with prefix data.
References
----------
This idea arose out of discussions[1] with Reid Kleckner in response to a
proposal to introduce the notion of symbol offsets to enable handling of
case (3).
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
Test Plan: testsuite
Differential Revision: http://reviews.llvm.org/D6454
llvm-svn: 223189
The X86AsmParser intel handling was refactored in r216481, making it
try each different memory operand size to see which one matches.
Operand sizes larger than 80 ("[xyz]mmword ptr") were forgotten, which
led to an "invalid operand" error for code such as:
movdqa [rax], xmm0
llvm-svn: 223187
We need to use the custom expansion of readcyclecounter on all 32-bit targets
(even those with 64-bit registers). This should fix the ppc64 buildbot.
llvm-svn: 223182
A global variable without an explicit alignment specified should be assumed to
be ABI-aligned according to its type, like on other platforms. This allows us
to use better memory operations when accessing it.
rdar://18533701
llvm-svn: 223180
This frequently leads to cases like:
ldr xD, [xN, :lo12:var]
add xA, xN, :lo12:var
ldr xD, [xA, #8]
where the ADD would have been needed anyway, and the two distinct addressing
modes can prevent the formation of an ldp. Because of how we handle ADRP
(aggressively forming an ADRP/ADD pseudo-inst at ISel time), this pattern also
results in duplicated ADRP instructions (one on its own to cover the ldr, and
one combined with the add).
llvm-svn: 223172
4i32 shuffles for single insertions into zero vectors lowers to X86vzmovl which was using (v)blendps - causing domain switch stalls. This patch fixes this by using (v)pblendw instead.
The updated tests on test/CodeGen/X86/sse41.ll still contain a domain stall due to the use of insertps - I'm looking at fixing this in a future patch.
Differential Revision: http://reviews.llvm.org/D6458
llvm-svn: 223165
We've long supported readcyclecounter on PPC64, but it is easier there (the
read of the 64-bit time-base register can be accomplished via a single
instruction). This now provides an implementation for PPC32 as well. On PPC32,
the time-base register is still 64 bits, but can only be read 32 bits at a time
via two separate SPRs. The ISA manual explains how to do this properly (it
involves re-reading the upper bits and looping if the counter has wrapped while
being read).
This requires PPC to implement a custom integer splitting legalization for the
READCYCLECOUNTER node, turning it into a target-specific SDAG node, which then
gets turned into a pseudo-instruction, which is then expanded to the necessary
sequence (which has three SPR reads, the comparison and the branch).
Thanks to Paul Hargrove for pointing out to me that this was still unimplemented.
llvm-svn: 223161
Reduce the number of nops emitted for stackmap shadows on AArch64 by counting
non-stackmap instructions up to the next branch target towards the requested
shadow.
<rdar://problem/14959522>
llvm-svn: 223156
Summary:
Like N32/N64, they must be passed in the upper bits of the register.
The new code could be merged with the existing if-statements but I've
refrained from doing this since it will make porting the O32 implementation
to tablegen harder later.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6463
llvm-svn: 223148
Previously .cpu directive in ARM assembler didnt switch to the new CPU and
therefore acted as a nop. This implemented real action for .cpu and eg.
allows to assembler FreeBSD kernel with -integrated-as.
llvm-svn: 223147
This is the third patch in a small series. It contains the CodeGen support for lowering the gc.statepoint intrinsic sequences (223078) to the STATEPOINT pseudo machine instruction (223085). The change also includes the set of helper routines and classes for working with gc.statepoints, gc.relocates, and gc.results since the lowering code uses them.
With this change, gc.statepoints should be functionally complete. The documentation will follow in the fourth change, and there will likely be some cleanup changes, but interested parties can start experimenting now.
I'm not particularly happy with the amount of code or complexity involved with the lowering step, but at least it's fairly well isolated. The statepoint lowering code is split into it's own files and anyone not working on the statepoint support itself should be able to ignore it.
During the lowering process, we currently spill aggressively to stack. This is not entirely ideal (and we have plans to do better), but it's functional, relatively straight forward, and matches closely the implementations of the patchpoint intrinsics. Most of the complexity comes from trying to keep relocated copies of values in the same stack slots across statepoints. Doing so avoids the insertion of pointless load and store instructions to reshuffle the stack. The current implementation isn't as effective as I'd like, but it is functional and 'good enough' for many common use cases.
In the long term, I'd like to figure out how to integrate the statepoint lowering with the register allocator. In principal, we shouldn't need to eagerly spill at all. The register allocator should do any spilling required and the statepoint should simply record that fact. Depending on how challenging that turns out to be, we may invest in a smarter global stack slot assignment mechanism as a stop gap measure.
Reviewed by: atrick, ributzka
llvm-svn: 223137
Follow up from r222926. Also handle multiple destinations from merged
cases on multiple and subsequent phi instructions.
rdar://problem/19106978
llvm-svn: 223135
Go through implicit defs of CSMI and MI, and clear the kill flags on
their uses in all the instructions between CSMI and MI.
We might have made some of the kill flags redundant, consider:
subs ... %NZCV<imp-def> <- CSMI
csinc ... %NZCV<imp-use,kill> <- this kill flag isn't valid anymore
subs ... %NZCV<imp-def> <- MI, to be eliminated
csinc ... %NZCV<imp-use,kill>
Since we eliminated MI, and reused a register imp-def'd by CSMI
(here %NZCV), that register, if it was killed before MI, should have
that kill flag removed, because it's lifetime was extended.
Also, add an exhaustive testcase for the motivating example.
Reviewed by: Juergen Ributzka <juergen@apple.com>
llvm-svn: 223133
The blocking code originated in ARM, which is more aggressive about casting
types to a canonical representative before doing anything else, so I missed out
most vector HFAs and broke the ABI. This should fix it.
llvm-svn: 223126
This operating system type represents the AMD HSA runtime,
and will be required by the R600 backend in order to generate
correct code for this runtime.
llvm-svn: 223124
Load instructions are inserted into loop preheaders when sinking stores
and later removed if not used by the SSA updater. Avoid sinking if the
loop has no preheader and avoid crashes. This fixes one more side effect
of not handling indirectbr instructions properly on LoopSimplify.
llvm-svn: 223119
Removing an unused function which is causing one of the build bots to fail.
This was introduced in the commit r223113. A proper cleanup of the so_imm
tblgen defintion (made redundant by the mod_imm definition) needs to happen
soon.
llvm-svn: 223115
Certain ARM instructions accept 32-bit immediate operands encoded as a 8-bit
integer value (0-255) and a 4-bit rotation (0-30, even). Current ARM assembly
syntax support in LLVM allows the decoded (32-bit) immediate to be specified
as a single immediate operand for such instructions:
mov r0, #4278190080
The ARMARM defines an extended assembly syntax allowing the encoding to be made
more explicit, as in:
mov r0, #255, #8 ; (same 32-bit value as above)
The behaviour of the two instructions can be different w.r.t flags, which is
documented under "Modified immediate constants" in ARMARM. This patch enables
support for this extended syntax at the MC layer.
llvm-svn: 223113
The default ARM floating-point mode does not support IEEE 754 mode exactly. Of
relevance to this patch is that input denormals are flushed to zero. The way in
which they're flushed to zero depends on the architecture,
* For VFPv2, it is implementation defined as to whether the sign of zero is
preserved.
* For VFPv3 and above, the sign of zero is always preserved when a denormal
is flushed to zero.
When FP support has been disabled, the strategy taken by this patch is to
assume the software support will mirror the behaviour of the hardware support
for the target *if it existed*. That is, for architectures which can only have
VFPv2, it is assumed the software will flush to positive zero. For later
architectures it is assumed the software will flush to zero preserving sign.
Change-Id: Icc5928633ba222a4ba3ca8c0df44a440445865fd
llvm-svn: 223110
In both the Unix and Windows variants, std::getenv was called and the
result passed directly to a function accepting a StringRef. This isn't
OK because it might return a null pointer and that causes the StringRef
constructor to assert (and generally produces crash-prone code if
asserts are disabled). Fix this by independently testing the result as
non-null prior to splitting things.
This in turn uncovered another bug in the Unix variant where it would
infinitely recurse if PATH="", or after this fix if PATH isn't set.
There is no need to recurse at all. Slightly re-arrange the code to make
it clear that we can just fixup the Paths argument based on the
environment if we find anything.
I don't know of a particularly useful way to test these routines in
LLVM. I'll commit a test to Clang that ensures that its driver correctly
handles various settings of PATH. However, I have no idea how to
correctly write a Windows test for the PATHEXT change. Any Windows
developers who could provide such a test, please have at. =D
Many thanks to Nick Lewycky and others for helping debug this. =/ It was
quite nasty for us to track down.
llvm-svn: 223099
System memory allocation functions, which are identified at the IR level by the
noalias attribute on the return value, must return a pointer into a memory region
disjoint from any other memory accessible to the caller. We can use this
property to simplify pointer comparisons between allocated memory and local
stack addresses and the addresses of global variables. Neither the stack nor
global variables can overlap with the region used by the memory allocator.
Fixes PR21556.
llvm-svn: 223093
This is the second patch in a small series. This patch contains the MachineInstruction and x86-64 backend pieces required to lower Statepoints. It does not include the code to actually generate the STATEPOINT machine instruction and as a result, the entire patch is currently dead code. I will be submitting the SelectionDAG parts within the next 24-48 hours. Since those pieces are by far the most complicated, I wanted to minimize the size of that patch. That patch will include the tests which exercise the functionality in this patch. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
The STATEPOINT psuedo node is generated after all gc values are explicitly spilled to stack slots. The purpose of this node is to wrap an actual call instruction while recording the spill locations of the meta arguments used for garbage collection and other purposes. The STATEPOINT is modeled as modifing all of those locations to prevent backend optimizations from forwarding the value from before the STATEPOINT to after the STATEPOINT. (Doing so would break relocation semantics for collectors which wish to relocate roots.)
The implementation of STATEPOINT is closely modeled on PATCHPOINT. Eventually, much of the code in this patch will be removed. The long term plan is to merge the functionality provided by statepoints and patchpoints. Merging their implementations in the backend is likely to be a good starting point.
Reviewed by: atrick, ributzka
llvm-svn: 223085
The statepoint intrinsics are intended to enable precise root tracking through the compiler as to support garbage collectors of all types. The addition of the statepoint intrinsics to LLVM should have no impact on the compilation of any program which does not contain them. There are no side tables created, no extra metadata, and no inhibited optimizations.
A statepoint works by transforming a call site (or safepoint poll site) into an explicit relocation operation. It is the frontend's responsibility (or eventually the safepoint insertion pass we've developed, but that's not part of this patch series) to ensure that any live pointer to a GC object is correctly added to the statepoint and explicitly relocated. The relocated value is just a normal SSA value (as seen by the optimizer), so merges of relocated and unrelocated values are just normal phis. The explicit relocation operation, the fact the statepoint is assumed to clobber all memory, and the optimizers standard semantics ensure that the relocations flow through IR optimizations correctly.
This is the first patch in a small series. This patch contains only the IR parts; the documentation and backend support will be following separately. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
Reviewed by: atrick, ributzka
llvm-svn: 223078
Summary:
".weak" symbols cannot be consumed by ptxas (PR21685). This patch makes the
weak directive in MCAsmPrinter customizable, and disables emitting ".weak"
symbols for NVPTX.
Test Plan: weak-linkage.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6455
llvm-svn: 223077
r208210 introduced an optimization that improves the vector select
codegen by doing the setcc on vectors directly.
This is a problem they the setcc operands are i1s, because the
optimization would create vectors of i1, which aren't legal.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6308
llvm-svn: 223075
r213378 improved f16 bitcasts, so that they go directly through subregs,
instead of through the stack. That code now causes an assertion failure
for bitcasts from other 16-bits types (most importantly v2i8).
Correct that by doing the custom lowering for i16 bitcasts only when the
input is an f16.
Part of PR21549.
Differential Revision: http://reviews.llvm.org/D6307
llvm-svn: 223074
The MachineVerifier used to check that there was always exactly one
unconditional branch to a non-landingpad (normal) successor.
If that normal successor to an invoke BB is unreachable, it seems
reasonable to only have one successor, the landing pad.
On targets other than AArch64 (and on AArch64 with a different testcase),
the branch folder turns the branch to the landing pad into a fallthrough.
The MachineVerifier, which relies on AnalyzeBranch, is unable to check
the condition, and doesn't complain. However, it does in this specific
testcase, where the branch to the landing pad remained.
Make the MachineVerifier accept it.
llvm-svn: 223059
An unreachable default destination can be exploited by other optimizations, and
SDag lowering is now prepared to handle them efficiently.
For example, branches to the unreachable destination will be optimized away,
such as in the case of range checks for switch lookup tables.
On 64-bit Linux, this reduces the size of a clang bootstrap by 80 kB (and
Chromium by 30 kB).
llvm-svn: 223050
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
llvm-svn: 223049
The explicit set of destination types is not fully redundant when lazy loading
since the TypeFinder will not find types used only in function bodies.
This keeps the logic to drop the name of mapped types since it still helps
with avoiding further renaming.
llvm-svn: 223043
- Fix missing SALU format bits
- Remove unused isSALUInstr
- Add isVALU
- Switch isDS to use a bit like the others
- Move SIInstrInfo::is* functions to header
- Reorder so they are approximately sorted by type (SALU, VALU, memory)
llvm-svn: 223038
This change makes MemorySanitizer instrumentation a bit more strict
about instructions that have no origin id assigned to them.
This would have caught the bug that was fixed in r222918.
No functional change.
llvm-svn: 222997
Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.
This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.
Reviewers: willschm, uweigand, hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6410
llvm-svn: 222996
Add checkDecodedInstruction for post-decode checking of instructions, to catch
the corner cases like HVC that don't fit into the general pattern. Needed to
check for an invalid condition field in instruction encoding despite HVC not
taking a predicate.
Patch by Matthew Wahab.
Change-Id: I48e28de981d7a9e43569594da3c45fb478b4f795
llvm-svn: 222992
This commit fixes a bug in stack protector pass where edge weights were not set
when new basic blocks were added to lists of successor basic blocks.
Differential Revision: http://reviews.llvm.org/D5766
llvm-svn: 222987
Instead of keeping an explicit set, just drop the names of types we choose
to map to some other type.
This has the advantage that the name of the unused will not cause the context
to rename types on module read.
llvm-svn: 222986
Add assembler support for the fixed-point cache-inhibited load/store
instructions. These are hypervisor-level only, so don't get too excited ;)
Fixes PR21650.
llvm-svn: 222976
Upon further review I think the MultiClass is being copied into the map instead of being moved due to the copy constructor on the nested Record type. This ultimately got exposed when the vector in DefPrototype vector was changed to hold unique_ptrs in another commit. This caused gcc 4.7 to fail due to the use of the copy constructor on unique_ptr with the error pointing back to one of the insert calls from this commit. Not sure why clang was able to build.
This reverts commit 710cdf729f84b428bf41aa8d32dbdb35fff79fde.
llvm-svn: 222971
The previous patch had effect, but missed this one. It seems MSVC
gets ADL-confused by the calls where the first argument is a function call?
llvm-svn: 222968
It was failing with this kind of error:
C:\b\build\slave\CrWinClang\build\src\third_party\llvm\lib\TableGen\TGParser.cpp(1243) : error C2668: 'llvm::make_unique' : ambiguous call to overloaded function
C:\b\build\slave\CrWinClang\build\src\third_party\llvm\include\llvm/ADT/STLExtras.h(408): could be 'std::unique_ptr<llvm::Record,std::default_delete<_Ty>> llvm::make_unique<llvm::Record,std::string,llvm::SMLoc&,llvm::RecordKeeper&,bool>(std::string &&,llvm::SMLoc &,llvm::RecordKeeper &,bool &&)'
with
[
_Ty=llvm::Record
]
C:\b\depot_tools\win_toolchain\vs2013_files\win8sdk\bin\..\..\VC\include\memory(1637): or 'std::unique_ptr<llvm::Record,std::default_delete<_Ty>> std::make_unique<llvm::Record,std::string,llvm::SMLoc&,llvm::RecordKeeper&,bool>(std::string &&,llvm::SMLoc &,llvm::RecordKeeper &,bool &&)' [found using argument-dependent lookup]
with
[
_Ty=llvm::Record
]
while trying to match the argument list '(std::string, llvm::SMLoc, llvm::RecordKeeper, bool)'
llvm-svn: 222967
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
llvm-svn: 222936
We may be in a situation where the icmps might not be near each other in
a tree of or instructions. Try to dig out related compare instructions
and see if they combine.
N.B. This won't fire on deep trees of compares because rewritting the
tree might end up creating a net increase of IR. We may have to resort
to something more sophisticated if this is a real problem.
llvm-svn: 222928
Loop simplify skips exit-block insertion when exits contain indirectbr
instructions. This leads to an assertion in LICM when trying to sink
stores out of non-dedicated loop exits containing indirectbr
instructions. This patch fix this issue by re-checking for dedicated
exits in LICM prior to store sink attempts.
Differential Revision: http://reviews.llvm.org/D6414
rdar://problem/18943047
llvm-svn: 222927
Switch cases statements with sequential values that branch to the same
destination BB may often be handled together in a single new source BB.
In this scenario we need to remove remaining incoming values from PHI
instructions in the destination BB, as to match the number of source
branches.
Differential Revision: http://reviews.llvm.org/D6415
rdar://problem/19040894
llvm-svn: 222926
Allow unaligned 16-byte memop codegen for btver2. No functional changes for any other subtargets.
Replace the existing supposed small memcpy test with an actual test of a small memcpy.
The previous test wasn't using FileCheck either.
This patch should allow us to close PR21541 ( http://llvm.org/bugs/show_bug.cgi?id=21541 ).
Differential Revision: http://reviews.llvm.org/D6360
llvm-svn: 222925
The original patch would fail when:
* A dst opaque type (%A) is matched with a src type (%A).
* A src opaque (%E) type is then speculatively matched with %A and the
speculation fails afterward.
* When rolling back the speculation we would cancel the source %A to dest
%A mapping.
The fix is to keep an explicit list of which resolutions are speculative.
Original message:
Fix overly aggressive type merging.
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
llvm-svn: 222923
MSan does not assign origin for instrumentation temps (i.e. the ones that do
not come from the application code), but "select" instrumentation erroneously
tried to use one of those.
https://code.google.com/p/memory-sanitizer/issues/detail?id=78
llvm-svn: 222918
The AAPCS treats small structs and homogeneous floating (or vector) aggregates
specially, and guarantees they either get passed as a contiguous block of
registers, or prevent any future use of those registers and get passed on the
stack.
This concept can fit quite neatly into LLVM's own type system, mapping an HFA
to [N x float] and so on, and small structs to [N x i64]. Doing so allows
front-ends to emit AAPCS compliant code without having to duplicate the
register counting logic.
llvm-svn: 222903
I also added a test.
Original message:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
llvm-svn: 222897
This reverts commit r222760.
It changed our behaviour on PIC so we don't match gas anymore. It also
included lots of unnecessary changes to tests.
If those changes are desirable, there should be an independent discussion
as they are out of scope for that patch.
I will recommit the other bits.
llvm-svn: 222896
This reverts commit r222727, which causes LTO bootstrap failures.
Last passing @ r222698:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/532/
First failing @ r222843:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/533/
Internal bootstraps pointed at a much narrower range: r222725 is
passing, and r222731 is failing.
LTO crashes while handling libclang.dylib:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/533/consoleFull#-158682280549ba4694-19c4-4d7e-bec5-911270d8a58c
GEP is not of right type for indices!
%InfoObj.i.i = getelementptr inbounds %"class.llvm::OnDiskIterableChainedHashTable"* %.lcssa, i64 0, i32 0, i32 4, !dbg !123627
%"class.clang::serialization::reader::ASTIdentifierLookupTrait" = type { %"class.clang::ASTReader.31859"*, %"class.clang::serialization::ModuleFile.31870"*, %"class.clang::IdentifierInfo"* }LLVM ERROR: Broken function found, compilation aborted!
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Looks like the new algorithm doesn't merge types aggressively enough.
llvm-svn: 222895
Fixed missing dominance check.
Original commit message:
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
Jump threading will then eliminate the second if(cond).
llvm-svn: 222891
The string data for string-valued build attributes were being unconditionally
uppercased. There is no mention in the ARM ABI addenda about case conventions,
so it's technically implementation defined as to whether the data are
capitialised in some way or not. However, there are good reasons not to
captialise the data.
* It's less work.
* Some vendors may legitimately have case-sensitive checks for these
attributes which would fail on LLVM generated object files.
* There could be locale issues with uppercasing.
The original reasons for uppercasing appear to have stemmed from an
old codesourcery toolchain behaviour, see
http://comments.gmane.org/gmane.comp.compilers.llvm.cvs/87133
This patch makes the object file emitted no longer captialise string
data, it encodes as seen in the assembly source.
Change-Id: Ibe20dd6e60d2773d57ff72a78470839033aa5538
llvm-svn: 222882
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
\endcode
Jump threading will then eliminate the second if(cond).
llvm-svn: 222872
This restores our ability to optimize:
(X & C) ? X & ~C : X into X & ~C
(X & C) ? X : X & ~C into X
(X & C) ? X | C : X into X
(X & C) ? X : X | C into X | C
llvm-svn: 222868
All symbols have to be stored in the global symbol to enable
cross-rtdyld-instance linking, so the local symbol table content is
redundant.
llvm-svn: 222867
This reverts commit r210006, it miscompiled libapr which is used in who
knows how many projects.
A test has been added to ensure that we don't regress again.
I'll work on a rewrite of what the optimization was trying to do later.
llvm-svn: 222856
llvm-objdump printed out an error message for this off-by-one error,
but because it always exits with 0 whether or not it found an error,
the test (llvm-objdump/coff-many-relocs.test) succeeded.
I made llvm-objdump exit with EXIT_FAILURE when an error is found.
llvm-svn: 222852
This sort of doesn't matter since the setcc type is i1, but
this previously was using the default UndefinedBooleanContent. This
makes it more consistent with R600. This enables more optimizations
which typically give up on UndefinedBooleanContent. For example,
there is already a special case target DAG combine for
setcc + sext which can be eliminated in favor of what the generic
DAG combiner can do if it assumes boolean values are sign extended.
Since -1 is an inline immediate, using it is basically free and the
backend already uses it when a boolean value is needed in a wider type.
llvm-svn: 222850
This fixes moving boolean constants into registers before operating
on them. They get permuted and shrunk down to e32 anyway later. This
is a temporary fix until the patch that removes these pseudos is
committed.
llvm-svn: 222844
This mostly entails adding relocations, however there are a couple of
changes to existing relocations:
1. R_AARCH64_NONE is defined to be zero rather than 256
R_AARCH64_NONE has been defined to be zero for a long time elsewhere
e.g. binutils and glibc since the submission of the AArch64 port in
2012 so this is required for compatibility.
2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21
I don't think there is any way for relocation names to leak out of LLVM
so this should not break anything.
Tested with check-all with no regressions.
llvm-svn: 222821
including SAE mode and memory operand.
Added AVX512_maskable_scalar template, that should cover all scalar instructions in the future.
The main difference between AVX512_maskable_scalar<> and AVX512_maskable<> is using X86select instead of vselect.
I need it, because I can't create vselect node for MVT::i1 mask for scalar instruction.
http://reviews.llvm.org/D6378
llvm-svn: 222820
that we actually have an object to register first.
For MachO objects, RuntimeDyld::LoadedObjectInfo::getObjectForDebug returns an
empty OwningBinary<ObjectFile> which was causing crashes in the GDB registration
code.
llvm-svn: 222812
The RuntimeDyld cleanup patch r222810 turned on GDB registration for MachO
objects. I expected this to be harmless, but it seems to have broken on
MacsOS. Temporarily disabling debugger registration while I dig in to what's
gone wrong.
llvm-svn: 222811
Previously, when loading an object file, RuntimeDyld (1) took ownership of the
ObjectFile instance (and associated MemoryBuffer), (2) potentially modified the
object in-place, and (3) returned an ObjectImage that managed ownership of the
now-modified object and provided some convenience methods. This scheme accreted
over several years as features were tacked on to RuntimeDyld, and was both
unintuitive and unsafe (See e.g. http://llvm.org/PR20722).
This patch fixes the issue by removing all ownership and in-place modification
of object files from RuntimeDyld. Existing behavior, including debugger
registration, is preserved.
Noteworthy changes include:
(1) ObjectFile instances are now passed to RuntimeDyld by const-ref.
(2) The ObjectImage and ObjectBuffer classes have been removed entirely, they
existed to model ownership within RuntimeDyld, and so are no longer needed.
(3) RuntimeDyld::loadObject now returns an instance of a new class,
RuntimeDyld::LoadedObjectInfo, which can be used to construct a modified
object suitable for registration with the debugger, following the existing
debugger registration scheme.
(4) The JITRegistrar class has been removed, and the GDBRegistrar class has been
re-written as a JITEventListener.
This should fix http://llvm.org/PR20722 .
llvm-svn: 222810
Since (v)pslldq / (v)psrldq instructions resolve to a single input argument it is useful to match it much earlier than we currently do - this prevents more complicated shuffles (notably insertion into a zero vector) matching before it.
Differential Revision: http://reviews.llvm.org/D6409
llvm-svn: 222796
If solveBlockValue() needs results from predecessors that are not already
computed, it returns false with the intention of resuming when the dependencies
have been resolved. However, the computation would never be resumed since an
'overdefined' result had been placed in the cache, preventing any further
computation.
The point of placing the 'overdefined' result in the cache seems to have been
to break cycles, but we can check for that when inserting work items in the
BlockValue stack instead. This makes the "stop and resume" mechanism of
solveBlockValue() work as intended, unlocking more analysis.
Using this patch shaves 120 KB off a 64-bit Chromium build on Linux.
I benchmarked compiling bzip2.c at -O2 but couldn't measure any difference in
compile time.
Tests by Jiangning Liu from r215343 / PR21238, Pete Cooper, and me.
Differential Revision: http://reviews.llvm.org/D6397
llvm-svn: 222768
This changes the order in which different types are passed to get, but
one order is not inherently better than the other.
The main motivation is that this simplifies linkDefinedTypeBodies now that
it is only linking "real" opaque types. It is also means that we only have to
call it once and that we don't need getImpl.
A small change in behavior is that we don't copy type names when resolving
opaque types. This is an improvement IMHO, but it can be added back if
desired. A test is included with the new behavior.
llvm-svn: 222764
Mark destination buffer in zlib::compress and zlib::decompress as fully
initialized.
When building LLVM with system zlib and MemorySanitizer instrumentation,
MSan does not observe memory writes in zlib code and erroneously considers
zlib output buffers as uninitialized, resulting in false use-of-uninitialized
memory reports. This change helps MSan understand the state of that memory
and prevents such reports.
llvm-svn: 222763
and PIC:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
llvm-svn: 222760
Exactly the same checks are present in areTypesIsomorphic.
This might have been a premature performance optimization. I cannot reproduce
any slowdown with this patch.
llvm-svn: 222758
stored rather than the pointer type.
This change is analogous to r220138 which changed the canonicalization
for loads. The rationale is the same: memory does not have a type,
operations (and thus the values they produce) have a type. We should
match that type as closely as possible rather than reading some form of
semantics into the pointer type.
With this change, loads and stores should no longer be made with
nonsensical types for the values that tehy load and store. This is
particularly important when trying to match specific loaded and stored
types in the process of doing other instcombines, which is what led me
down this twisty maze of miscanonicalization.
I've put quite some effort into looking through IR to find places where
LLVM's optimizer was being unreasonably conservative in the face of
mismatched load and store types, however it is possible (let's say,
likely!) I have missed some. If you see regressions here, or from
r220138, the likely cause is some part of LLVM failing to cope with load
and store types differing. Test cases appreciated, it is important that
we root all of these out of LLVM.
llvm-svn: 222748
clearly only exactly equal width ptrtoint and inttoptr casts are no-op
casts, it says so right there in the langref. Make the code agree.
Original log from r220277:
Teach the load analysis to allow finding available values which require
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
llvm-svn: 222739
Only the super register flat_scr was marked as reserved,
so in some cases with high register usage it would still
try to allocate the subregisters.
llvm-svn: 222737
The pattern matching failed to recognize all instances of "-1", because when
comparing against "-1" we didn't use an APInt of the same bitwidth.
This commit fixes this and also adds inverse versions of the conditon to catch
more cases.
llvm-svn: 222722
This handles cases where we are comparing a masked value against itself.
The analysis could be further improved by making it recursive but such
expense is not currently justified.
llvm-svn: 222716
The attn instruction is not part of the Power ISA, but is documented in the A2
user manual, and is accepted by the GNU assembler for the A2 and the POWER4+.
Reported as part of PR21650.
llvm-svn: 222712
This does not matter on newer cores (where we can use reciprocal estimates in
fast-math mode anyway), but for older cores this allows us to generate better
fast-math code where we have multiple FDIVs with a common divisor.
llvm-svn: 222710
We were matching against the assume intrinsic in every check. Since we know that it must be an assume, this is just wasted work. Somewhat surprisingly, matching an intrinsic id is actually relatively expensive. It devolves to a string construction and comparison in Function::isIntrinsic.
I originally spotted this because it showed up in a performance profile of my compiler. I've since discovered a separate issue which seems to be the actual root cause, but this is minor perf goodness regardless.
I'm likely to follow up with another change to factor out the comparison matching. There's no need to match the compare instruction in every single one of the tests.
Differential Revision: http://reviews.llvm.org/D6312
llvm-svn: 222709
When processing an assignment in the integrated assembler that sets
a symbol to the value of another symbol, we need to copy the st_other
bits that encode the local entry point offset.
Modeled after MipsTargetELFStreamer::emitAssignment handling of the
ELF::STO_MIPS_MICROMIPS flag.
llvm-svn: 222672
We would create an instruction but not inserting it.
Not inserting the unused instruction would lead us to verification
failure.
This fixes PR21653.
llvm-svn: 222659
Fix JRADDIUSP instruction, remove delay slot flag because this instruction
doesn't have delay slot.
Differential Revision: http://reviews.llvm.org/D6365
llvm-svn: 222658
With the help of new method readInstruction16() two bytes are read and
decodeInstruction() is called with DecoderTableMicroMips16, if this fails
four bytes are read and decodeInstruction() is called with
DecoderTableMicroMips32.
Differential Revision: http://reviews.llvm.org/D6149
llvm-svn: 222648
This patch teaches function 'transformVSELECTtoBlendVECTOR_SHUFFLE' how to
convert VSELECT dag nodes to shuffles on targets that do not have SSE4.1.
On pre-SSE4.1 targets, we can still perform blend operations using movss/movsd.
Also, removed a target specific combine that performed a premature lowering of
VSELECT nodes to target specific MOVSS/MOVSD nodes.
llvm-svn: 222647
We tried to get the result of DataLayout::getLargestLegalIntTypeSize but
we didn't have a DataLayout. This resulted in opt crashing.
This fixes PR21651.
llvm-svn: 222645
r222375 made some improvements to build_vector lowering of v4x32 and v4xf32 into an insertps, but it missed a case where:
1. A single extracted element is used twice.
2. The lower of the two non-zero indexes should be preserved, and the higher should be used for the dest mask.
This caused a crash, since the source value for the insertps ends-up uninitialized.
Differential Revision: http://reviews.llvm.org/D6377
llvm-svn: 222635
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 222632
No functionality changed yet, but this will prevent subsequent patches
from having to handle permutations of various interleaved shuffle
patterns.
llvm-svn: 222614
Rafael Espindola