Fixes the self-host fail. Note that this commit activates dominator
analysis in the combiner by default (like the original commit did).
llvm-svn: 222590
This s_mov_b32 will write to a virtual register from the M0Reg
class and all the ds instructions now take an extra M0Reg explicit
argument.
This change is necessary to prevent issues with the scheduler
mixing together instructions that expect different values in the m0
registers.
llvm-svn: 222583
filler such as if delay slot filler have to put NOP instruction into the
delay slot of microMIPS BEQ or BNE instruction which uses the register $0,
then instead of emitting NOP this instruction is replaced by the corresponding
microMIPS compact branch instruction, i.e. BEQZC or BNEZC.
Differential Revision: http://reviews.llvm.org/D3566
llvm-svn: 222580
We can now use the ELF relocation .def files to create the mapping
of relocation numbers to names and avoid having to duplicate the
list of relocations.
Patch by Will Newton.
llvm-svn: 222567
We can now use the ELF relocation .def files to create the mapping
of relocation numbers to names and avoid having to duplicate the
list of relocations.
Patch by Will Newton.
llvm-svn: 222566
This patch adds a feature flag to avoid unaligned 32-byte load/store AVX codegen
for Sandy Bridge and Ivy Bridge. There is no functionality change intended for
those chips. Previously, the absence of AVX2 was being used as a proxy to detect
this feature. But that hindered codegen for AVX-enabled AMD chips such as btver2
that do not have the 32-byte unaligned access slowdown.
Performance measurements are included in PR21541 ( http://llvm.org/bugs/show_bug.cgi?id=21541 ).
Differential Revision: http://reviews.llvm.org/D6355
llvm-svn: 222544
shuffle lowering to allow much better blend matching.
Specifically, with the new structure the code seems clearer to me and we
correctly can hit the cases where merging two 128-bit lanes is a clear
win and can be shuffled cheaply afterward.
llvm-svn: 222539
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
llvm-svn: 222538
a bunch more improvements.
Non-lane-crossing is fine, the key is that lane merging only makes sense
for single-input shuffles. Not sure why I got so turned around here. The
code all works, I was just using the wrong model for it.
This only updates v4 and v8 lowering. The v16 and v32 lowering requires
restructuring the entire check sequence.
llvm-svn: 222537
Before this patch, the DAGCombiner only tried to convert build_vector dag nodes
into shuffles if all operands were either extract_vector_elt or undef.
This patch improves that logic and teaches the DAGCombiner how to deal with
build_vector dag nodes where one or more operands are zero. A build_vector
dag node with some zero operands is turned into a shuffle only if the resulting
shuffle mask is legal for the target.
llvm-svn: 222536
lanes.
By special casing these we can often either reduce the total number of
shuffles significantly or reduce the number of (high latency on Haswell)
AVX2 shuffles that potentially cross 128-bit lanes. Even when these
don't actually cross lanes, they have much higher latency to support
that. Doing two of them and a blend is worse than doing a single insert
across the 128-bit lanes to blend and then doing a single interleaved
shuffle.
While this seems like a narrow case, it kept cropping up on me and the
difference is *huge* as you can see in many of the test cases. I first
hit this trying to perfectly fix the interleaving shuffle patterns used
by Halide for AVX2.
llvm-svn: 222533
This patch simplifies the logic that combines a pair of shuffle nodes into
a single shuffle if there is a legal mask. Also added comments to better
describe the algorithm. No functional change intended.
llvm-svn: 222522
E.g., ( a / D; b / D ) -> ( recip = 1.0 / D; a * recip; b * recip)
A hook is added to allow the target to control whether it needs to do such combine.
Reviewed in http://reviews.llvm.org/D6334
llvm-svn: 222510
This mirrors r222331, which enabled SeparateConstOffsetFromGEP on AArch64, in
the PowerPC backend. Yields, on a POWER7 machine, a 30% speedup on
SingleSource/Benchmarks/Shootout/nestedloop (this might just be from LICM,
there is a store moved out of the inner loop) and a potential speedup on
MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec/mpeg2decode. Regardless, it
makes some code look cleaner, and synchronizing the backends in this regard
seems like a generally good thing.
llvm-svn: 222504
The alloca's type is irrelevant, only those types which are used in a
load or store of the exact size of the slice should be considered.
This manifested as an assertion failure when we compared the various
types: we had a size mismatch.
This fixes PR21480.
llvm-svn: 222499
These recently all grew a unique_ptr<TargetLoweringObjectFile> member in
r221878. When anyone calls a virtual method of a class, clang-cl
requires all virtual methods to be semantically valid. This includes the
implicit virtual destructor, which triggers instantiation of the
unique_ptr destructor, which fails because the type being deleted is
incomplete.
This is just part of the ongoing saga of PR20337, which is affecting
Blink as well. Because the MSVC ABI doesn't have key functions, we end
up referencing the vtable and implicit destructor on any virtual call
through a class. We don't actually end up emitting the dtor, so it'd be
good if we could avoid this unneeded type completion work.
llvm-svn: 222480
Code seems cleaner and easier to understand this way
This is basically r222416, after fixes for MSVC lack of standard
support, and a few cleaning (got rid of a warning).
Thanks Nakamura Takumi and Nico Weber for the MSVC fixes.
llvm-svn: 222472
Currently LoopUnroll generates a prologue loop before the main loop
body to execute first N%UnrollFactor iterations. Also, this loop is
used if trip-count can overflow - it's determined by a runtime check.
However, we've been mistakenly optimizing this loop to a linear code for
UnrollFactor = 2, not taking into account that it also serves as a safe
version of the loop if its trip-count overflows.
llvm-svn: 222451
Windows itanium targets the MSVCRT, and the stack probe symbol is provided by
MSVCRT. This corrects the emission of stack probes on i686-windows-itanium.
llvm-svn: 222439
As dump() methods should be. To allow that, do not store the DWARFFormValue
objects used for the dump in the header data.
Per Alexey's suggestion!
llvm-svn: 222436
These fields would need to be explicitly deleted before we RAUW the temporary
node anyway (this was done in cfe commit r222373). Instead, do not create
these useless nodes in the first place.
llvm-svn: 222434
"global-init", "global-init-src" and "global-init-type" were originally
used to blacklist entities in ASan init-order checker. However, they
were never documented, and later were replaced by "=init" category.
Old blacklist entries should be converted as follows:
* global-init:foo -> global:foo=init
* global-init-src:bar -> src:bar=init
* global-init-type:baz -> type:baz=init
llvm-svn: 222401
This reverts commit r222142. This is causing/exposing an execution-time regression
in spec2006/gcc and coremark on AArch64/A57/Ofast.
Conflicts:
test/Transforms/Reassociate/optional-flags.ll
llvm-svn: 222398
- Show "Considering..." message after flipping so you actually see the final
destination vreg as destination.
- Add a message on final join, so you can grep for "Success" messages to obtain
a list of which register got merged with which.
llvm-svn: 222382
This patch improves the lowering of v4f32 and v4i32 build_vector dag nodes
that are known to have at least two non-zero elements.
With this patch, a build_vector that performs a blend with zero is
converted into a shuffle. This is done to let the shuffle legalizer expand
the dag node in a optimal way. For example, if we know that a build_vector
performs a blend with zero, we can try to lower it as a movq/blend instead of
always selecting an insertps.
This patch also improves the logic that lowers a build_vector into a insertps
with zero masking. See for example the extra test cases added to test sse41.ll.
Differential Revision: http://reviews.llvm.org/D6311
llvm-svn: 222375
As detailed at http://llvm.org/PR20728, due to an internal overflow in
APFloat::multiplySignificand the APFloat::fusedMultiplyAdd method can return
incorrect results for x87DoubleExtended (x86_fp80) values. This commonly
manifests as incorrect constant folding of libm fmal calls on x86. E.g.
fmal(1.0L, 1.0L, 3.0L) == 0.0L (should be 4.0L)
This patch fixes PR20728 by adding an extra bit to the significand for
intermediate results of APFloat::multiplySignificand, avoiding the overflow.
llvm-svn: 222374
A register operand that has a common sub-class with its instruction's
defined register class is not always legal. For example,
SReg_32 and M0Reg both have a common sub-class, but we can't
use an SReg_32 in instructions that expect a M0Reg.
This prevents the llvm.SI.sendmsg.ll test from failing when the fold
operand pass is added.
llvm-svn: 222368
When the BasicBlock containing the return instrution has a PHI with 2
incoming values, FoldReturnIntoUncondBranch will remove the no longer
used incoming value and remove the no longer needed phi as well. This
leaves us with a BB that no longer has a PHI, but the subsequent call
to FoldReturnIntoUncondBranch from FoldReturnAndProcessPred will not
remove the return instruction (which still uses the result of the call
instruction). This prevents EliminateRecursiveTailCall to remove
the value, as it is still being used in a basicblock which has no
predecessors.
The basicblock can not be erased on the spot, because its iterator is
still being used in runTRE.
This issue was exposed when removing the threshold on size for lifetime
marker insertion for named temporaries in clang. The testcase is a much
reduced version of peelOffOuterExpr(const Expr*, const ExplodedNode *)
from clang/lib/StaticAnalyzer/Core/BugReporterVisitors.cpp.
llvm-svn: 222354
This patch builds on http://reviews.llvm.org/D5598 to perform byte rotation shuffles (lowerVectorShuffleAsByteRotate) on pre-SSSE3 (palignr) targets - pre-SSSE3 is only enabled on i8 and i16 vector targets where it is a more definite performance gain.
I've also added a separate byte shift shuffle (lowerVectorShuffleAsByteShift) that makes use of the ability of the SLLDQ/SRLDQ instructions to implicitly shift in zero bytes to avoid the need to create a zero register if we had used palignr.
Differential Revision: http://reviews.llvm.org/D5699
llvm-svn: 222340
AliasSetTracker::addUnknown may create an AliasSet devoid of pointers
just to contain an instruction if no suitable AliasSet already exists.
It will then AliasSet::addUnknownInst and we will be done.
However, it's possible for addUnknown to choose an existing AliasSet to
addUnknownInst.
If this were to occur, we are in a bit of a pickle: removing pointers
from the AliasSet can cause the entire AliasSet to become destroyed,
taking our unknown instructions out with them.
Instead, keep track whether or not our AliasSet has any unknown
instructions.
This fixes PR21582.
llvm-svn: 222338
This is to be consistent with StringSet and ultimately with the standard
library's associative container insert function.
This lead to updating SmallSet::insert to return pair<iterator, bool>,
and then to update SmallPtrSet::insert to return pair<iterator, bool>,
and then to update all the existing users of those functions...
llvm-svn: 222334
Using AA during CodeGen is very useful for in-order cores. It is less useful for ooo cores. Also I find
enabling useAA for Cortex-A57 may generate worse code for some test cases. If useAA in codegen is improved
and benefical for ooo cores, we can enable it again.
llvm-svn: 222333
SeparateConstOffsetFromGEP can gives more optimizaiton opportunities related to GEPs, which benefits EarlyCSE
and LICM. By enabling these passes we can have better address calculations and generate a better addressing
mode. Some SPEC 2006 benchmarks (astar, gobmk, namd) have obvious improvements on Cortex-A57.
Reviewed in http://reviews.llvm.org/D5864.
llvm-svn: 222331
If LowerGEP is enabled, it can lower a GEP with multiple indices into GEPs with a single index
or arithmetic operations. Lowering GEPs can always extract structure indices. Lowering GEPs can
also give use more optimization opportunities. It can benefit passes like CSE, LICM and CGP.
Reviewed in http://reviews.llvm.org/D5864
llvm-svn: 222328
Having two ways to do this doesn't seem terribly helpful and
consistently using the insert version (which we already has) seems like
it'll make the code easier to understand to anyone working with standard
data structures. (I also updated many references to the Entry's
key and value to use first() and second instead of getKey{Data,Length,}
and get/setValue - for similar consistency)
Also removes the GetOrCreateValue functions so there's less surface area
to StringMap to fix/improve/change/accommodate move semantics, etc.
llvm-svn: 222319
It printed out base relocation table header as table entry.
This patch also makes llvm-readobj to not skip ABSOLUTE entries
becuase it was confusing.
llvm-svn: 222299
Summary:
move the code from BreakCriticalEdges::runOnFunction()
into a separate utility function llvm::SplitAllCriticalEdges()
so that it can be used independently.
No functionality change intended.
Test Plan: check-llvm
Reviewers: nlewycky
Reviewed By: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6313
llvm-svn: 222288
This partially makes up for not having address spaces
used for alias analysis in some simple cases.
This is not yet enabled by default so shouldn't change anything yet.
llvm-svn: 222286
Assuming unmodeled side effects interferes with some scheduling
opportunities.
Don't put it in the base class of DS instructions since there
are a few weird effecting, non load/store instructions there.
llvm-svn: 222285
Under many circumstances the stack is not 32-byte aligned, resulting in the use of the vmovups/vmovupd/vmovdqu instructions when inserting ymm reloads/spills.
This minor patch adds these instructions to the isFrameLoadOpcode/isFrameStoreOpcode helpers so that they can be correctly identified and not be treated as folded reloads/spills.
This has also been noticed by http://llvm.org/bugs/show_bug.cgi?id=18846 where it was causing redundant spills - I've added a reduced test case at test/CodeGen/X86/pr18846.ll
Differential Revision: http://reviews.llvm.org/D6252
llvm-svn: 222281
shift-right for booleans (i1).
Arithmetic shift-right immediate with sign-/zero-extensions also works for
boolean values. Update the assert and the test cases to reflect that fact.
llvm-svn: 222272
shift-right for booleans (i1).
Logical shift-right immediate with sign-/zero-extensions also works for boolean
values. Update the assert and the test cases to reflect that fact.
llvm-svn: 222270
We would attempt to replace an frem's operand with the same operand.
This would cause InstCombine to think real work was done, causing
InstCombine to enter an infinite loop.
This fixes the second part of PR21576.
llvm-svn: 222265
Shifts also perform sign-/zero-extends to larger types, which requires us to emit
an integer extend instead of a simple COPY.
Related to PR21594.
llvm-svn: 222257
This should expose more of the actually used VALU
instructions to the machine optimization passes.
This also should help getting i1 handling into a better state.
For not entirly understood reasons, this fixes the split-scalar-i64-add.ll
test where a 64-bit add would only partially be moved to the VALU
resulting in use of undefined VCC.
llvm-svn: 222256
"optimizeCompareInstr" converts compares (cmp/cmn) into plain sub/add
instructions when the flags are not used anymore. This conversion is valid for
most instructions, but not all. Some instructions that don't set the flags
(e.g. sub with immediate) can set the SP, whereas the flag setting version uses
the same encoding for the "zero" register.
Update the code to also check for the return register before performing the
optimization to make sure that a cmp doesn't suddenly turn into a sub that sets
the stack pointer.
I don't have a test case for this, because it isn't easy to trigger.
llvm-svn: 222255
This change emits a COPY for a shift-immediate with a "zero" shift value.
This fixes PR21594 where we emitted a shift instruction with an incorrect
immediate operand.
llvm-svn: 222247
EarlyCSE is giving up on the current instruction immediately when it recognizes that the current instruction makes a previous store trivially dead. There's no reason to do this. Once the previous store has been deleted, it's perfectly legal to remember the value of the current store (for value forwarding) and the fact the store occurred (it could be dead too!).
Reviewed by: Hal
Differential Revision: http://reviews.llvm.org/D6301
llvm-svn: 222241
It is impossible for (x & INT_MAX) == 0 && x == INT_MAX to ever be true.
While this sort of reasoning should normally live in InstSimplify,
the machinery that derives this result is not trivial to split out.
llvm-svn: 222230
Usually global variables are in a retain list and instanciated before
any call to constructImportedEntityDIE is made. This isn't true for
forward declarations though.
The testcase for this change is generated by a clang patched to emit
such forward declarations (patch at http://reviews.llvm.org/D6173
which will land soon). The updated testcase tests more than just
global variables, it now tests every type of 'using' clause we
support.
llvm-svn: 222217
I added a pessimization in r217102 to prevent miscompiles when the
incremented induction variable was used in a comparison; it would be
poison.
Try to use the incremented induction variable more often when we can be
sure that the increment won't end in poison.
Differential Revision: http://reviews.llvm.org/D6222
llvm-svn: 222213
Having the operands at the back prevents subclasses from safely adding
fields. Move them to the front.
Instead of replicating the custom `malloc()`, `free()` and `DestroyFlag`
logic that was there before, overload `new` and `delete`.
I added calls to a new `GenericMDNode::dropAllReferences()` in
`LLVMContextImpl::~LLVMContextImpl()`. There's a maze of callbacks
happening during teardown, and this resolves them before we enter
the destructors.
Part of PR21532.
llvm-svn: 222211
Split `MDNode` into two classes:
- `GenericMDNode`, which is uniquable (and for now, always starts
uniqued). Once `Metadata` is split from the `Value` hierarchy, this
class will lose the ability to RAUW itself.
- `MDNodeFwdDecl`, which is used for the "temporary" interface, is
never uniqued, and isn't managed by `LLVMContext` at all.
I've left most of the guts in `MDNode` for now, but I'll incrementally
move things to the right places (or delete the functionality, as
appropriate).
Part of PR21532.
llvm-svn: 222205
use DIScopeRef.
A paired commit at clang will follow to show cases where we will use an
identifer for the context of a global variable.
rdar://18958417
llvm-svn: 222195
Change uniquing from a `FoldingSet` to a `DenseSet` with custom
`DenseMapInfo`. Unfortunately, this doesn't save any memory, since
`DenseSet<T>` is a simple wrapper for `DenseMap<T, char>`, but I'll come
back to fix that later.
I used the name `GenericDenseMapInfo` to the custom `DenseMapInfo` since
I'll be splitting `MDNode` into two classes soon: `MDNodeFwdDecl` for
temporaries, and `GenericMDNode` for everything else.
I also added a non-debug-info reduced version of a type-uniquing test
that started failing on an earlier draft of this patch.
Part of PR21532.
llvm-svn: 222191
This was resulting in use of a register after a kill.
For some reason this showed up as a problem in many tests
when moving the SIFixSGPRCopies pass closer to instruction
selection.
llvm-svn: 222175
When converting a switch to a lookup table we might have to generate a bitmaks
to encode and check for holes in the original switch statement.
The type of this mask depends on the number of switch statements, which can
result in illegal types for pretty much all architectures.
To avoid unnecessary type legalization and help FastISel this commit increases
the size of the bitmask to next power-of-2 value when necessary.
This fixes rdar://problem/18984639.
llvm-svn: 222168
The triple parser should only accept existing architecture names
when the triple starts with armv, armebv, thumbv or thumbebv.
Patch by Gabor Ballabas.
llvm-svn: 222129
SCEVDivision::divide constructed an object of SCEVDivision<Derived>
instead of Derived. divide would call visit which would cast the
SCEVDivision<Derived> to type Derived. As it happens,
SCEVDivision<Derived> and Derived currently have the same layout but
this is fragile and grounds for UB.
Instead, just construct Derived. No functional change intended.
llvm-svn: 222126
This was motivated by a bug which caused code like this to be
miscompiled:
declare void @take_ptr(i8*)
define void @test() {
%addr1.32 = alloca i8
%addr2.32 = alloca i32, i32 1028
call void @take_ptr(i8* %addr1)
ret void
}
This was emitting the following assembly to get the value of %addr1:
add r0, sp, #1020
add r0, r0, #8
However, "add r0, r0, #8" is not a valid Thumb1 instruction, and this
could not be assembled. The generated object file contained this,
resulting in r0 holding SP+8 rather tha SP+1028:
add r0, sp, #1020
add r0, sp, #8
This function looked like it could have caused miscompilations for
other combinations of registers and offsets (though I don't think it is
currently called with these), and the heuristic it used did not match
the emitted code in all cases.
llvm-svn: 222125
We were a little lax in a few areas:
- We pretended that import libraries were like any old COFF file, they
are not. In fact, they aren't really COFF files at all, we should
probably grow some specialized functionality to handle them smarter.
- Our symbol iterators were more than happy to attempt to go past the
end of the symbol table if you had a symbol with a bad list of
auxiliary symbols.
llvm-svn: 222124
Some optimisations in DAGCombiner cause miscompilations for targets that use
TargetLowering::UndefinedBooleanContent, because they assume that the results
of a SELECT_CC node are boolean values, and can be safely ANDed, ORed and
XORed. These optimisations are only valid for targets that use
ZeroOrOneBooleanContent or ZeroOrNegativeOneBooleanContent.
This is a follow-up to D6210/r221693.
llvm-svn: 222123
This is a simple optimization for switch table lookup:
It computes the output value directly with an (optional) mul and add if there is a linear mapping between index and output.
Example:
int f1(int x) {
switch (x) {
case 0: return 10;
case 1: return 11;
case 2: return 12;
case 3: return 13;
}
return 0;
}
generates:
define i32 @f1(i32 %x) #0 {
entry:
%0 = icmp ult i32 %x, 4
br i1 %0, label %switch.lookup, label %return
switch.lookup:
%switch.offset = add i32 %x, 10
ret i32 %switch.offset
return:
ret i32 0
}
llvm-svn: 222121
Indices into the table are stored in each MCRegisterClass instead of a pointer. A new method, getRegClassName, is added to MCRegisterInfo and TargetRegisterInfo to lookup the string in the table.
llvm-svn: 222118
This adds back r222061, but now calls initializePAEvalPass from the correct
library to avoid link problems.
Original message:
Don't make assumptions about the name of private global variables.
Private variables are can be renamed, so it is not reliable to make
decisions on the name.
The name is also dropped by the assembler before getting to the
linker, so using the name causes a disconnect between how llvm makes a
decision (var name) and how the linker makes a decision (section it is
in).
This patch changes one case where we were looking at the variable name to use
the section instead.
Test tuning by Michael Gottesman.
llvm-svn: 222117
It turns out that not all users of SCEVDivision want the same
signedness. Let the users determine which operation they'd like by
explicitly choosing SCEVUDivision or SCEVSDivision.
findArrayDimensions and computeAccessFunctions will use SCEVSDivision
while HowFarToZero will use SCEVUDivision.
llvm-svn: 222104
Summary:
Several places in DependenceAnalysis assumes both SCEVs in a subscript pair
share the same integer type. For instance, isKnownPredicate calls
SE->getMinusSCEV(X, Y) which asserts X and Y share the same type. However,
DependenceAnalysis fails to ensure this assumption when producing a subscript
pair, causing tests such as NonCanonicalizedSubscript to crash. With this
patch, DependenceAnalysis runs unifySubscriptType before producing any
subscript pair, ensuring the assumption.
Test Plan:
Added NonCanonicalizedSubscript.ll on which DependenceAnalysis before the fix
crashed because subscripts have different types.
Reviewers: spop, sebpop, jingyue
Reviewed By: jingyue
Subscribers: eliben, meheff, llvm-commits
Differential Revision: http://reviews.llvm.org/D6289
llvm-svn: 222100
HowFarToZero was supposed to use unsigned division in order to calculate
the backedge taken count. However, SCEVDivision::divide performs signed
division. Unless I am mistaken, no users of SCEVDivision actually want
signed arithmetic: switch to udiv and urem.
This fixes PR21578.
llvm-svn: 222093
A few things:
- computeKnownBits is relatively expensive, let's delay its use as long
as we can.
- Don't create two APInt values just to run computeKnownBits on a
ConstantInt, we already know the exact value!
- Avoid creating a temporary APInt value in order to calculate unary
negation.
llvm-svn: 222092
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
llvm-svn: 222090
Updated X86TargetLowering::isShuffleMaskLegal to match SHUFP masks with commuted inputs and PSHUFD masks that reference the second input.
As part of this I've refactored isPSHUFDMask to work in a more general manner and allow it to match against either the first or second input vector.
Differential Revision: http://reviews.llvm.org/D6287
llvm-svn: 222087
This gets the correct NaN behavior based on the compare type
the hardware uses. This now passes the new piglit test I have
for this on SI.
Add stricter tests for the operand order.
llvm-svn: 222079
This is so it could potentially be used by SI. However, the current
implementation does not always produce correct results, so the
IntegerDivisionPass is being used instead.
llvm-svn: 222072
Make explicit the requirement that most IR values in `DIBuilder` are
`Constant`. This requires a follow-up change in clang.
Part of PR21532.
llvm-svn: 222070
Now that `MDString` and `MDNode` have a common base class, use it. Note
that it's not useful to assume subclasses of `Metadata` must be one or
the other since we'll be adding more subclasses soon enough.
Part of PR21532.
llvm-svn: 222064
Summary:
The current "WinEH" exception handling type is more about Itanium-style
LSDA tables layered on top of the Windows native unwind info format
instead of .eh_frame tables or EHABI unwind info. Use the name
"ItaniumWinEH" to better reflect the hybrid nature of the design.
Also rename isExceptionHandlingDWARF to usesItaniumLSDAForExceptions,
since the LSDA is part of the Itanium C++ ABI document, and not the
DWARF standard.
Reviewers: echristo
Subscribers: llvm-commits, compnerd
Differential Revision: http://reviews.llvm.org/D6279
llvm-svn: 222062
Private variables are can be renamed, so it is not reliable to make
decisions on the name.
The name is also dropped by the assembler before getting to the
linker, so using the name causes a disconnect between how llvm makes a
decision (var name) and how the linker makes a decision (section it is
in).
This patch changes one case where we were looking at the variable name to use
the section instead.
Test tuning by Michael Gottesman.
llvm-svn: 222061
We use to track quite a few "adjusted" offsets through the FrameLowering code
to account for changes in the prologue instructions as we went and allow the
emission of correct CFA annotations. However, we were missing a couple of cases
and the code was almost impenetrable.
It's easier to just add any stack-adjusting instruction to a list and emit them
together.
llvm-svn: 222057
When we folded the DPR alignment gap into a push, we weren't noting the extra
distance from the beginning of the push to the FP, and so FP ended up pointing
at an incorrect offset.
The .cfi_def_cfa_offset directives are still wrong in this case, but I think
that can be improved by refactoring.
llvm-svn: 222056
We would attempt to replace a fptrunc of an frem with an identical
fptrunc. This would cause the new fptrunc to be added to the worklist.
Of course, this results in an infinite loop because we will keep
visiting the newly created fptruncs.
This fixes PR21576.
llvm-svn: 222040
doing Load PRE"
This commit updates the failing test in
Analysis/TypeBasedAliasAnalysis/gvn-nonlocal-type-mismatch.ll
The failing test is sensitive to the order in which we process loads. This
version turns on the RPO traversal instead of the while DT traversal in GVN.
The new test code is functionally same just the order of loads that are
eliminated is swapped.
This new version also fixes an issue where GVN splits a critical edge and
potentially invalidate the RPO/DT iterator.
llvm-svn: 222039
If we have spilled the value of the m0 register, then we need to restore
it with v_readlane_b32 to a regular sgpr, because v_readlane_b32 can't
write to m0.
v_readlane_b32 can't write to m0, so
llvm-svn: 222036
This allows COFF targets to emit accelerator tables
when requested by -dwarf-accel-tables=Enable instead
of aborting. The test DebugInfo/cross-cu-inlining.ll
covers this on COFF platforms.
llvm-svn: 222034
ELF targets (and maybe COFF) use relocations when referring
to strings in the .debug_str section. Handle that in the
accelerator table dumper. This commit restores the
test/DebugInfo/cross-cu-inlining.ll test to its expected
platform independant form, validating that the fix works
(this test failed on linux boxes).
llvm-svn: 222029
Prior to this commit fmul and fadd binary operators were being canonicalized for
both scalar and vector versions. We now canonicalize add, mul, and, or, and xor
vector instructions.
llvm-svn: 222006
This reverts commit r221842 which was a revert of r221836 and of the
test parts of r221837.
This new version fixes an UB bug pointed out by David (along with
addressing some other review comments), makes some dumping more
resilient to broken input data and forces the accelerator tables
to be dumped in the tests where we use them (this decision is
platform specific otherwise).
llvm-svn: 222003
This patch adds builtin support for xvdivdp and xvdivsp, along with a
test case. Straightforward stuff.
There's a companion patch for Clang.
llvm-svn: 221983
In support of serializing executables, obj2yaml now records the virtual address
and size of sections. It also serializes whatever we strictly need from
the PE header, it expects that it can reconstitute everything else via
inference.
yaml2obj can reconstitute a fully linked executable.
In order to get executables correctly serialized/deserialized, other
bugs were fixed as a circumstance. We now properly respect file and
section alignments. We also avoid writing out string tables unless they
are strictly necessary.
llvm-svn: 221975
This teaches CoverageMapping::getCoveredFunctions to filter to a
particular file and uses that to replace most of the logic found in
llvm-cov report.
llvm-svn: 221962
getTargetConstant should only be used when you can guarantee the instruction
selected will be able to cope with the raw value. BUILD_VECTOR is rather too
generic for this so we should use getConstant instead. In that case, an
instruction can still consume the constant, but if it doesn't it'll be
materialised through its own round of ISel.
Should fix PR21352.
llvm-svn: 221961
Stop using `Value::getName()` to get the string behind an `MDString`.
Switch to `StringMapEntry<MDString>` so that we can find the string by
its coallocation.
This is part of PR21532.
llvm-svn: 221960
Hide the fact that `MDString`'s string is stored in `Value::Name` --
that's going to change soon. Update the only in-tree client that was
using it instead of `Value::getString()`.
Part of PR21532.
llvm-svn: 221951
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
llvm-svn: 221948
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
llvm-svn: 221947
Windows defines NULL to 0, which when used as an argument to a variadic
function, is not a null pointer constant. As a result, Clang's
-Wsentinel fires on this code. Using '0' would be wrong on most 64-bit
platforms, but both MSVC and Clang make it work on Windows. Sidestep the
issue with nullptr.
llvm-svn: 221940
The generic FastISel code would bail, because it can't emit a sign-extend for
AArch64. This copies the code over and uses AArch64 specific emit functions.
This is not ideal and 'computeAddress' should handles this, so it can fold the
address computation into the memory operation.
I plan to clean up 'computeAddress' anyways, so I will add that in a future
commit.
Related to rdar://problem/18962471.
llvm-svn: 221923
These were directly using the old base instruction
class, and specifying the wrong register classes
for operands. The operands can be the other special
inputs besides SGPRs. The op name was also being
directly used for the asm string, so this was printed
without any operands.
llvm-svn: 221921
If a function is just an unreachable, this would hit a
"this is not a MachO target" assertion because of setting
HasSubsectionViaSymbols.
llvm-svn: 221920
e.g. v_mad_f32 a, b, c -> v_mad_f32 b, a, c
This simplifies matching v_madmk_f32.
This looks somewhat surprising, but it appears to be
OK to do this. We can commute src0 and src1 in all
of these instructions, and that's all that appears
to matter.
llvm-svn: 221910
Normally entries can only move to a lower address, but when that wasn't viable,
the user's block was considered anyway. Unfortunately, it went via
createNewWater which wasn't designed to handle the case where there's already
an island after the block.
Unfortunately, the test we have is slow and fragile, and I couldn't reduce it
to anything sane even with the @llvm.arm.space intrinsic. The test change here
is recreating the previous one after the change.
rdar://problem/18545506
llvm-svn: 221905
We were using a naive heuristic to determine whether a basic block already had
an unconditional branch at the end. This mostly corresponded to reality
(assuming branches got optimised) because there's not much point in a branch to
the next block, but could go wrong.
llvm-svn: 221904
Creating tests for the ConstantIslands pass is very difficult, since it depends
on precise layout details. Having the ability to precisely inject a number of
bytes into the stream helps greatly.
llvm-svn: 221903
This will become the root of a new class hierarchy separate from
`Value`. As a first step, stick it between `Value` and `MDNode`.
This is part of PR21532.
llvm-svn: 221886
Let's try this again...
This reverts r219432, plus a bug fix.
Description of the bug in r219432 (by Nick):
The bug was using AllPositive to break out of the loop; if the loop break
condition i != e is changed to i != e && AllPositive then the
test_modulo_analysis_with_global test I've added will fail as the Modulo will
be calculated incorrectly (as the last loop iteration is skipped, so Modulo
isn't updated with its Scale).
Nick also adds this comment:
ComputeSignBit is safe to use in loops as it takes into account phi nodes, and
the == EK_ZeroEx check is safe in loops as, no matter how the variable changes
between iterations, zero-extensions will always guarantee a zero sign bit. The
isValueEqualInPotentialCycles check is therefore definitely not needed as all
the variable analysis holds no matter how the variables change between loop
iterations.
And this patch also adds another enhancement to GetLinearExpression - basically
to convert ConstantInts to Offsets (see test_const_eval and
test_const_eval_scaled for the situations this improves).
Original commit message:
This reverts r218944, which reverted r218714, plus a bug fix.
Description of the bug in r218714 (by Nick):
The original patch forgot to check if the Scale in VariableGEPIndex flipped the
sign of the variable. The BasicAA pass iterates over the instructions in the
order they appear in the function, and so BasicAliasAnalysis::aliasGEP is
called with the variable it first comes across as parameter GEP1. Adding a
%reorder label puts the definition of %a after %b so aliasGEP is called with %b
as the first parameter and %a as the second. aliasGEP later calculates that %a
== %b + 1 - %idxprom where %idxprom >= 0 (if %a was passed as the first
parameter it would calculate %b == %a - 1 + %idxprom where %idxprom >= 0) -
ignoring that %idxprom is scaled by -1 here lead the patch to incorrectly
conclude that %a > %b.
Revised patch by Nick White, thanks! Thanks to Lang to isolating the bug.
Slightly modified by me to add an early exit from the loop and avoid
unnecessary, but expensive, function calls.
Original commit message:
Two related things:
1. Fixes a bug when calculating the offset in GetLinearExpression. The code
previously used zext to extend the offset, so negative offsets were converted
to large positive ones.
2. Enhance aliasGEP to deduce that, if the difference between two GEP
allocations is positive and all the variables that govern the offset are also
positive (i.e. the offset is strictly after the higher base pointer), then
locations that fit in the gap between the two base pointers are NoAlias.
Patch by Nick White!
llvm-svn: 221876
Split getObject's smarts into checkOffset, use this to replace the
handwritten check in getSectionContents. Similarly, replace checks in
section_rel_begin/section_rel_end with getNumberOfRelocations.
No functionality change intended.
llvm-svn: 221873
lib/Object is supposed to be robust to malformed object files. Don't
assert if we don't have a symbol table. I'll try to come up with a test
case later.
llvm-svn: 221870
getObject didn't consider the case where a pointer came before the start
of the object file. No test is included, trying to come up with
something reasonable.
llvm-svn: 221868
between splitting a vector into 128-bit lanes and recombining them vs.
decomposing things into single-input shuffles and a final blend.
This handles a large number of cases in AVX1 where the cross-lane
shuffles would be much more expensive to represent even though we end up
with a fast blend at the root. Instead, we can do a better job of
shuffling in a single lane and then inserting it into the other lanes.
This fixes the remaining bits of Halide's regression captured in PR21281
for AVX1. However, the bug persists in AVX2 because I've made this
change reasonably conservative. The cases where it makes sense in AVX2
to split into 128-bit lanes are much more rare because we can often do
full permutations across all elements of the 256-bit vector. However,
the particular test case in PR21281 is an example of one of the rare
cases where it is *always* better to work in a single 128-bit lane. I'm
going to try to teach the logic to detect and form the good code even in
AVX2 next, but it will need to use a separate heuristic.
Finally, there is one pesky regression here where we previously would
craftily use vpermilps in AVX1 to shuffle both high and low halves at
the same time. We no longer pull that off, and not for any really good
reason. Ultimately, I think this is just another missing nuance to the
selection heuristic that I'll try to add in afterward, but this change
already seems strictly worth doing considering the magnitude of the
improvements in common matrix math shuffle patterns.
As always, please let me know if this causes a surprising regression for
you.
llvm-svn: 221861
re-combining shuffles because nothing was available in the wider vector
type.
The key observation (which I've put in the comments for future
maintainers) is that at this point, no further combining is really
possible. And so even though these shuffles trivially could be combined,
we need to actually do that as we produce them when producing them this
late in the lowering.
This fixes another (huge) part of the Halide vector shuffle regressions.
As it happens, this was already well covered by the tests, but I hadn't
noticed how bad some of these got. The specific patterns that turn
directly into unpckl/h patterns were occurring *many* times in common
vector processing code.
There are still more problems here sadly, but trying to incrementally
tease them apart and it looks like this is the core of the problem in
the splitting logic.
There is some chance of regression here, you can see it in the test
changes. Specifically, where we stop forming pshufb in some cases, it is
possible that pshufb was in fact faster. Intel "says" that pshufb is
slower than the instruction sequences replacing it.
llvm-svn: 221852
Prior to this patch the TypePromotionHelper was promoting only sign extensions.
Supporting zero extensions changes:
- How constants are extended.
- How sign extensions, zero extensions, and truncate are composed together.
- How the type of the extended operation is recorded. Now we need to know the
kind of the extension as well as its type.
Each change is fairly small, unlike the diff.
Most of the diff are comments/variable renaming to say "extension" instead of
"sign extension".
The performance improvements on the test suite are within the noise.
Related to <rdar://problem/18310086>.
llvm-svn: 221851
This folds the compare emission into the select emission when possible, so we
can directly use the flags and don't have to emit a separate compare.
Related to rdar://problem/18960150.
llvm-svn: 221847
This reverts commit r221836.
The tests are asserting on some buildbots. This also reverts the
test part of r221837 as it relies on dwarfdump dumping the
accelerator tables.
llvm-svn: 221842
Windows normally limits the length of an absolute path name to 260
characters; directories can have lower limits. These limits increase
to about 32K if you use absolute paths with the special '\\?\'
prefix. Teach Support\Windows\Path.inc to use that prefix as needed.
TODO: Other parts of Support could also learn to use this prefix.
llvm-svn: 221841
If x is known to have the range [a, b), in a loop predicated by (icmp
ne x, a) its range can be sharpened to [a + 1, b). Get
ScalarEvolution and hence IndVars to exploit this fact.
This change triggers an optimization to widen-loop-comp.ll, so it had
to be edited to get it to pass.
This change was originally landed in r219834 but had a bug and broke
ASan. It was reverted in r219878, and is now being re-landed after
fixing the original bug.
phabricator: http://reviews.llvm.org/D5639
reviewed by: atrick
llvm-svn: 221839
The DIE offset in the accel tables is an offset relative to the start
of the debug_info section, but we were encoding the offset to the
start of the containing CU.
llvm-svn: 221837
Currently FormValues are only used for attributes of DIEs and thus
uers always have a CU lying around when calling into the FormValue
API.
Accelerator tables encode their information using the same Forms
as the attributes, thus it is natural to use DWARFFormValue to
extract/dump them. There is no CU in that case though. Allow the
API to be called with a null CU arguemnt by making the RelocMap
lookup conditional on the CU pointer validity. And document this
new behvior in the header. (Test coverage for this use of the API
comes in the DwarfAccelTable support patch)
llvm-svn: 221835
r221820 fixed a problem (PR21548) where an iPTR was used in TLI legality checks,
which isn't valid and resulted in a failed assertion.
The solution was to lower pointer types into the correct target's VT, by
using TL::getValueType instead of EVT::getEVT.
This commit changes 3 other uses of EVT::getEVT, but without any tests:
- One of these non-lowered EVTs is passed to allowsMisalignedMemoryAccesses,
which goes into target's TL implementation and doesn't cause any problem (yet.)
- Two others are passed to TLI.isOperationLegalOrCustom:
- one only looks at extensions, so doesn't concern pointers.
- one only looks at binary operators, so also isn't a problem.
The latter might some day be exposed to pointers and cause the same assert as
the original PR, because there's a comment hinting at also supporting cast ops.
For consistency, update all of them and be done with it.
llvm-svn: 221827
This is a follow-on to r221706 and r221731 and discussed in more detail in PR21385.
This patch also loosens the testcase checking for btver2. We know that the "1.0" will be loaded, but
we can't tell exactly when, so replace the CHECK-NEXT specifiers with plain CHECKs. The CHECK-NEXT
sequence relied on a quirk of post-RA-scheduling that may change independently of anything in these tests.
llvm-svn: 221819
One of them (__memcpy_chk) was already there, the others were checked
by comparing function names.
Note that the fortified libfuncs are now part of TLI, but are always
available, because they aren't generated, only optimized into the
non-checking versions.
Differential Revision: http://reviews.llvm.org/D6179
llvm-svn: 221817
Make the handling of calls to intrinsics in CGSCC consistent:
they are not treated like regular function calls because they
are never lowered to function calls.
Without this patch, we can get dangling pointer asserts from
the subsequent loop that processes callsites because it already
ignores intrinsics.
See http://llvm.org/bugs/show_bug.cgi?id=21403 for more details / discussion.
Differential Revision: http://reviews.llvm.org/D6124
llvm-svn: 221802
Summary:
Reapply r221772. The old patch breaks the bot because the @indvar_32_bit test
was run whether NVPTX was enabled or not.
IndVarSimplify should not widen an indvar if arithmetics on the wider
indvar are more expensive than those on the narrower indvar. For
instance, although NVPTX64 treats i64 as a legal type, an ADD on i64 is
twice as expensive as that on i32, because the hardware needs to
simulate a 64-bit integer using two 32-bit integers.
Split from D6188, and based on D6195 which adds NVPTXTargetTransformInfo.
Fixes PR21148.
Test Plan:
Added @indvar_32_bit that verifies we do not widen an indvar if the arithmetics
on the wider type are more expensive. This test is run only when NVPTX is
enabled.
Reviewers: jholewinski, eliben, meheff, atrick
Reviewed By: atrick
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6196
llvm-svn: 221799
Summary:
Large-model was added first. With the addition of support for multiple PIC
models in LLVM, now add small-model PIC for 32-bit PowerPC, SysV4 ABI. This
generates more optimal code, for shared libraries with less than about 16380
data objects.
Test Plan: Test cases added or updated
Reviewers: joerg, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, mcrosier, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5399
llvm-svn: 221791
cases from Halide folks. This initial step was extracted from
a prototype change by Clay Wood to try and address regressions found
with Halide and the new vector shuffle lowering.
llvm-svn: 221779
Summary:
IndVarSimplify should not widen an indvar if arithmetics on the wider
indvar are more expensive than those on the narrower indvar. For
instance, although NVPTX64 treats i64 as a legal type, an ADD on i64 is
twice as expensive as that on i32, because the hardware needs to
simulate a 64-bit integer using two 32-bit integers.
Split from D6188, and based on D6195 which adds NVPTXTargetTransformInfo.
Fixes PR21148.
Test Plan:
Added @indvar_32_bit that verifies we do not widen an indvar if the arithmetics
on the wider type are more expensive.
Reviewers: jholewinski, eliben, meheff, atrick
Reviewed By: atrick
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6196
llvm-svn: 221772
This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for
PowerPC, which provide programmer access to the lxvd2x, lxvw4x,
stxvd2x, and stxvw4x instructions.
New LLVM intrinsics are provided to represent these four instructions
in IntrinsicsPowerPC.td. These are patterned after the similar
intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these
intrinsics are tied to the code gen patterns, with additional patterns
to allow plain vanilla loads and stores to still generate these
instructions.
At -O1 and higher the intrinsics are immediately converted to loads
and stores in InstCombineCalls.cpp. This will open up more
optimization opportunities while still allowing the correct
instructions to be generated. (Similar code exists for aligned
Altivec loads and stores.)
The new intrinsics are added to the code that checks for consecutive
loads and stores in PPCISelLowering.cpp, as well as to
PPCTargetLowering::getTgtMemIntrinsic().
There's a new test to verify the correct instructions are generated.
The loads and stores tend to be reordered, so the test just counts
their number. It runs at -O2, as it's not very effective to test this
at -O0, when many unnecessary loads and stores are generated.
I ended up having to modify vsx-fma-m.ll. It turns out this test case
is slightly unreliable, but I don't know a good way to prevent
problems with it. The xvmaddmdp instructions read and write the same
register, which is one of the multiplicands. Commutativity allows
either to be chosen. If the FMAs are reordered differently than
expected by the test, the register assignment can be different as a
result. Hopefully this doesn't change often.
There is a companion patch for Clang.
llvm-svn: 221767
Every MemoryObject is a StreamableMemoryObject since the removal of
StringRefMemoryObject, so just merge the two.
I will clean up the MemoryObject interface in the upcoming commits.
llvm-svn: 221766
With this patch MCDisassembler::getInstruction takes an ArrayRef<uint8_t>
instead of a MemoryObject.
Even on X86 there is a maximum size an instruction can have. Given
that, it seems way simpler and more efficient to just pass an ArrayRef
to the disassembler instead of a MemoryObject and have it do a virtual
call every time it wants some extra bytes.
llvm-svn: 221751
For historical reasons archives on mach-o have two possible names for the
file containing the table of contents for the archive: "__.SYMDEF SORTED"
and "__.SYMDEF". But the libObject archive reader only supported the former.
This patch fixes llvm::object::Archive to support both names.
llvm-svn: 221747
Currently, we have a type parameter mechanism for intrinsics. Rather than having to specify a separate intrinsic for each combination of argument and return types, we can specify a single intrinsic with one or more type parameters. These type parameters are passed explicitly to Intrinsic::getDeclaration or can be specified implicitly in the naming of the intrinsic function in an LL file.
Today, the types are limited to integer, floating point, and pointer types. With a goal of supporting symbolic targets for patchpoints and statepoints, this change adds support for function types. The change also includes support for first class aggregate types (named structures and arrays) since these appear in function types we've encountered.
Reviewed by: atrick, ributzka
Differential Revision: http://reviews.llvm.org/D4608
llvm-svn: 221742
We currently have two ways of informing the optimizer that the result of a load is never null: metadata and assume. This change converts the second in to the former. This avoids a need to implement optimizations using both forms.
We should probably extend this basic idea to metadata of other forms; in particular, range metadata. We view is that assumes should be considered a "last resort" for when there isn't a more canonical way to represent something.
Reviewed by: Hal
Differential Revision: http://reviews.llvm.org/D5951
llvm-svn: 221737
This is a reapplication of r221171, but we only perform the transformation
on expressions which include a multiplication. We do not transform rem/div
operations as this doesn't appear to be safe in all cases.
llvm-svn: 221721
Summary:
This change moves asan-coverage instrumentation
into a separate Module pass.
The other part of the change in clang introduces a new flag
-fsanitize-coverage=N.
Another small patch will update tests in compiler-rt.
With this patch no functionality change is expected except for the flag name.
The following changes will make the coverage instrumentation work with tsan/msan
Test Plan: Run regression tests, chromium.
Reviewers: nlewycky, samsonov
Reviewed By: nlewycky, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6152
llvm-svn: 221718
Instead, we're going to separate metadata from the Value hierarchy. See
PR21532.
This reverts commit r221375.
This reverts commit r221373.
This reverts commit r221359.
This reverts commit r221167.
This reverts commit r221027.
This reverts commit r221024.
This reverts commit r221023.
This reverts commit r220995.
This reverts commit r220994.
llvm-svn: 221711
What would happen before that commit is that the SDDbgValues associated with
a deallocated SDNode would be marked Invalidated, but SDDbgInfo would keep
a map entry keyed by the SDNode pointer pointing to this list of invalidated
SDDbgNodes. As the memory gets reused, the list might get wrongly associated
with another new SDNode. As the SDDbgValues are cloned when they are transfered,
this can lead to an exponential number of SDDbgValues being produced during
DAGCombine like in http://llvm.org/bugs/show_bug.cgi?id=20893
Note that the previous behavior wasn't really buggy as the invalidation made
sure that the SDDbgValues won't be used. This commit can be considered a
memory optimization and as such is really hard to validate in a unit-test.
llvm-svn: 221709
This commit adds a new pass that can inject checks before indirect calls to
make sure that these calls target known locations. It supports three types of
checks and, at compile time, it can take the name of a custom function to call
when an indirect call check fails. The default failure function ignores the
error and continues.
This pass incidentally moves the function JumpInstrTables::transformType from
private to public and makes it static (with a new argument that specifies the
table type to use); this is so that the CFI code can transform function types
at call sites to determine which jump-instruction table to use for the check at
that site.
Also, this removes support for jumptables in ARM, pending further performance
analysis and discussion.
Review: http://reviews.llvm.org/D4167
llvm-svn: 221708
This is a first step for generating SSE rcp instructions for reciprocal
calcs when fast-math allows it. This is very similar to the rsqrt optimization
enabled in D5658 ( http://reviews.llvm.org/rL220570 ).
For now, be conservative and only enable this for AMD btver2 where performance
improves significantly both in terms of latency and throughput.
We may never enable this codegen for Intel Core* chips because the divider circuits
are just too fast. On SandyBridge, divss can be as fast as 10 cycles versus the 21
cycle critical path for the rcp + mul + sub + mul + add estimate.
Follow-on patches may allow configuration of the number of Newton-Raphson refinement
steps, add AVX512 support, and enable the optimization for more chips.
More background here: http://llvm.org/bugs/show_bug.cgi?id=21385
Differential Revision: http://reviews.llvm.org/D6175
llvm-svn: 221706
My original support for the general dynamic and local dynamic TLS
models contained some fairly obtuse hacks to generate calls to
__tls_get_addr when lowering a TargetGlobalAddress. Rather than
generating real calls, special GET_TLS_ADDR nodes were used to wrap
the calls and only reveal them at assembly time. I attempted to
provide correct parameter and return values by chaining CopyToReg and
CopyFromReg nodes onto the GET_TLS_ADDR nodes, but this was also not
fully correct. Problems were seen with two back-to-back stores to TLS
variables, where the call sequences ended up overlapping with unhappy
results. Additionally, since these weren't real calls, the proper
register side effects of a call were not recorded, so clobbered values
were kept live across the calls.
The proper thing to do is to lower these into calls in the first
place. This is relatively straightforward; see the changes to
PPCTargetLowering::LowerGlobalTLSAddress() in PPCISelLowering.cpp.
The changes here are standard call lowering, except that we need to
track the fact that these calls will require a relocation. This is
done by adding a machine operand flag of MO_TLSLD or MO_TLSGD to the
TargetGlobalAddress operand that appears earlier in the sequence.
The calls to LowerCallTo() eventually find their way to
LowerCall_64SVR4() or LowerCall_32SVR4(), which call FinishCall(),
which calls PrepareCall(). In PrepareCall(), we detect the calls to
__tls_get_addr and immediately snag the TargetGlobalTLSAddress with
the annotated relocation information. This becomes an extra operand
on the call following the callee, which is expected for nodes of type
tlscall. We change the call opcode to CALL_TLS for this case. Back
in FinishCall(), we change it again to CALL_NOP_TLS for 64-bit only,
since we require a TOC-restore nop following the call for the 64-bit
ABIs.
During selection, patterns in PPCInstrInfo.td and PPCInstr64Bit.td
convert the CALL_TLS nodes into BL_TLS nodes, and convert the
CALL_NOP_TLS nodes into BL8_NOP_TLS nodes. This replaces the code
removed from PPCAsmPrinter.cpp, as the BL_TLS or BL8_NOP_TLS
nodes can now be emitted normally using their patterns and the
associated printTLSCall print method.
Finally, as a result of these changes, all references to get-tls-addr
in its various guises are no longer used, so they have been removed.
There are existing TLS tests to verify the changes haven't messed
anything up). I've added one new test that verifies that the problem
with the original code has been fixed.
llvm-svn: 221703
The ISel lowering for global TLS access in PIC mode was creating a pseudo
instruction that is later expanded to a call, but the code was not
setting the hasCalls flag in the MachineFrameInfo alongside the adjustsStack
flag. This caused some functions to be mistakenly recognized as leaf functions,
and this in turn affected the decision to eliminate the frame pointer.
With the fix, hasCalls is properly set and the leaf frame pointer is correctly
preserved.
llvm-svn: 221695
LLVM replaces the SelectionDAG pattern (xor (set_cc cc x y) 1) with
(set_cc !cc x y), which is only correct when the xor has type i1.
Instead, we should check that the constant operand to the xor is all
ones.
llvm-svn: 221693
Summary:
This patch enables code generation for the MIPS II target. Pre-Mips32
targets don't have the MUL instruction, so we add the correspondent
pattern that uses the MULT/MFLO combination in order to retrieve the
product.
This is WIP as we don't support code generation for select nodes due to
the lack of conditional-move instructions.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6150
llvm-svn: 221686
The canonical name when printing assembly is still $29. The reason is that
GAS does not accept "$hwr_ulr" at the moment.
This addresses the comments from r221307, which reverted the original
commit r221299.
llvm-svn: 221685
The original commit r221299 was reverted in r221307. I removed the name
"hrw_ulr" ($29) from the original commit because two tests were failing.
llvm-svn: 221681
Referencing one symbol from another in the same section does not
generally require a relocation. However, the MS linker has a feature
called /INCREMENTAL which enables incremental links. It achieves this
by creating thunks to the actual function and redirecting all
relocations to point to the thunk.
This breaks down with the old scheme if you have a function which
references, say, itself. On x86_64, we would use %rip relative
addressing to reference the start of the function from out current
position. This would lead to miscompiles because other references might
reference the thunk instead, breaking function pointer equality.
This fixes PR21520.
llvm-svn: 221678
This fixes an issue with matching trunc -> assertsext -> zext on x86-64, which would not zero the high 32-bits. See PR20494 for details.
Recommitting - This time, with a hopefully working test.
Differential Revision: http://reviews.llvm.org/D6128
llvm-svn: 221672
This adds const to a few methods that already return const references or
creates a const version when they reterun non-const references.
llvm-svn: 221666
AVX2 is available.
According to IACA, the new lowering has a throughput of 8 cycles instead of 13
with the previous one.
Althought this lowering kicks in some SPECs benchmarks, the performance
improvement was within the noise.
Correctness testing has been done for the whole range of uint32_t with the
following program:
uint4 v = (uint4) {0,1,2,3};
uint32_t i;
//Check correctness over entire range for uint4 -> float4 conversion
for( i = 0; i < 1U << (32-2); i++ )
{
float4 t = test(v);
float4 c = correct(v);
if( 0xf != _mm_movemask_ps( t == c ))
{
printf( "Error @ %vx: %vf vs. %vf\n", v, c, t);
return -1;
}
v += 4;
}
Where "correct" is the old lowering and "test" the new one.
The patch adds a test case for the two custom lowering instruction.
It also modifies the vector cost model, which is why cast.ll and uitofp.ll are
modified.
2009-02-26-MachineLICMBug.ll is also modified because we now hoist 7
instructions instead of 4 (3 more constant loads).
rdar://problem/18153096>
llvm-svn: 221657
In the case we optimize an integer extend away and replace it directly with the
source register, we also have to clear all kill flags at all its uses.
This is necessary, because the orignal IR instruction might be trivially dead,
but we replaced it with a nop at MI level.
llvm-svn: 221628
Switch statements may have more than one incoming edge into the same BB if they
all have the same value. When the switch statement is converted these incoming
edges are now coming from multiple BBs. Updating all incoming values to be from
a single BB is incorrect and would generate invalid LLVM IR.
The fix is to only update the first occurrence of an incoming value. Switch
lowering will perform subsequent calls to this helper function for each incoming
edge with a new basic block - updating all edges in the process.
This fixes rdar://problem/18916275.
llvm-svn: 221627
This fixes an issue with matching trunc -> assertsext -> zext on x86-64, which would not zero the high 32-bits.
See PR20494 for details.
Differential Revision: http://reviews.llvm.org/D6128
llvm-svn: 221626
Summary:
It currently only implements hasBranchDivergence, and will be extended
in later diffs.
Split from D6188.
Test Plan: make check-all
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6195
llvm-svn: 221619
This fixes a few cases of:
* Wrong variable name style.
* Lines longer than 80 columns.
* Repeated names in comments.
* clang-format of the above.
This make the next patch a lot easier to read.
llvm-svn: 221615
We already use the llvm namespace. Remove the unnecessary prefix. Use the
StringRef::equals method to compare with C strings rather than instantiating
std::strings.
Addresses late review comments from David Majnemer.
llvm-svn: 221564
Visual Studio 2012 apparently does not support using alias declarations. Use
the more traditional typedef approach. This should let the Windows buildbots
pass. NFC.
llvm-svn: 221554
This introduces the symbol rewriter. This is an IR->IR transformation that is
implemented as a CodeGenPrepare pass. This allows for the transparent
adjustment of the symbols during compilation.
It provides a clean, simple, elegant solution for symbol inter-positioning. This
technique is often used, such as in the various sanitizers and performance
analysis.
The control of this is via a custom YAML syntax map file that indicates source
to destination mapping, so as to avoid having the compiler to know the exact
details of the source to destination transformations.
llvm-svn: 221548
Summary:
... and after all that refactoring, it's possible to distinguish softfloat
floating point values from integers so this patch no longer breaks softfloat to
do it.
Remove direct handling of i32's in the N32/N64 ABI by promoting them to
i64. This more closely reflects the ABI documentation and also fixes
problems with stack arguments on big-endian targets.
We now rely on signext/zeroext annotations (already generated by clang) and
the Assert[SZ]ext nodes to avoid the introduction of unnecessary sign/zero
extends.
It was not possible to convert three tests to use signext/zeroext. These tests
are bswap.ll, ctlz-v.ll, ctlz-v.ll. It's not possible to put signext on a
vector type so we just accept the sign extends here for now. These tests don't
pass the vectors the same way clang does (clang puts multiple elements in the
same argument, these map 1 element to 1 argument) so we don't need to worry too
much about it.
With this patch, all known N32/N64 bugs should be fixed and we now pass the
first 10,000 tests generated by ABITest.py.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6117
llvm-svn: 221534
Summary:
One of the calls to AllocateStack (the one in LowerCall) doesn't look like
it should be there but it was there before and removing it breaks the
frame size calculation.
Reviewers: vmedic, theraven
Reviewed By: theraven
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6116
llvm-svn: 221529
Summary:
In addition to the usual f128 workaround, it was also necessary to provide
a means of accessing ArgListEntry::IsFixed.
Reviewers: theraven, vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6111
llvm-svn: 221518
Summary:
In the long run, it should probably become a calling convention in its own
right but for now just move it out of
MipsISelLowering::analyzeCallOperands() so that we can drop this function
in favour of CCState::AnalyzeCallOperands().
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6085
llvm-svn: 221517
Summary:
CCState objects already carry this information in their isVarArg() method.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6084
llvm-svn: 221516
We would attempt to fold away a call instruction which had been marked
overdefined. However, it's not valid to transition to constant from
overdefined.
This fixes PR21512.
llvm-svn: 221513
Summary:
This makes PIC levels a Module flag attribute, which can be queried by the
backend. The flag is named `PIC Level`, and can have a value of:
0 - Backend-default
1 - Small-model (-fpic)
2 - Large-model (-fPIC)
These match the `-pic-level' command line argument for clang, and the value of the
preprocessor macro `__PIC__'.
Test Plan:
New flags tests specific for the 'PIC Level' module flag.
Tests to be added as part of a future commit for PowerPC, which will use this new API.
Reviewers: rafael, echristo
Reviewed By: rafael, echristo
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5882
llvm-svn: 221510
Reversing a CB* instruction used to drop the flags on the condition. On the
included testcase, this lead to a read from an undefined vreg.
Using addOperand keeps the flags, here <undef>.
Differential Revision: http://reviews.llvm.org/D6159
llvm-svn: 221507
A pointer's pointee might not be sized: the pointee could be a function.
Report this as IK_NoInduction when calculating isInductionVariable.
This fixes PR21508.
llvm-svn: 221501
The ELF symbol `st_other` field might contain additional flags besides
visibility ones. This patch implements support for some MIPS specific
flags.
llvm-svn: 221491
Fixed an issue with the (v)cvttps2dq and (v)cvttpd2dq instructions being incorrectly put in the 2 source operand folding tables instead of the 1 source operand and added the missing SSE/AVX versions.
Also added missing (v)cvtps2dq and (v)cvtpd2dq instructions to the folding tables.
Differential Revision: http://reviews.llvm.org/D6001
llvm-svn: 221489
mingw lies about the size of a function's AuxFunctionDefinition. Ignore
the field and rely on our heuristic to determine the symbol's size.
llvm-svn: 221485
The variable is private, so the name should not be relied on. Also, the
linker uses the sections, so asan should too when trying to avoid causing
the linker problems.
llvm-svn: 221480
Imported declarations can be DIGlobalVariables which aren't a DIScope. Today
clang (unknowingly I believe) shoehorns these into a DIScope and it all works
just because we never access the fields.
llvm-svn: 221466
instructions. Inlining might cause such cases and it's not valid to
reassociate floating-point instructions without the unsafe algebra flag.
Patch by Mehdi Amini <mehdi_amini@apple.com>!
llvm-svn: 221462
Summary:
As with returns, we must be able to identify f128 arguments despite them
being lowered away. We do this with a pre-analyze step that builds a
vector and then we use this vector from the tablegen-erated code.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6081
llvm-svn: 221461
On 32 bit windows we use label differences and .set does not suppress
rolocations, a combination that was not used before r220256.
This fixes PR21497.
llvm-svn: 221456
Example:
define <4 x i32> @test(<4 x i32> %a, <4 x i32> %b) {
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 5, i32 6, i32 3>
ret <4 x i32> %shuffle
}
Before llc (-mattr=+sse4.1), produced the following assembly instruction:
pblendw $4294967103, %xmm1, %xmm0
After
pblendw $63, %xmm1, %xmm0
llvm-svn: 221455
Summary:
Currently, we give an error if %z is used with non-immediates, instead of continuing as if the %z isn't there.
For example, you use the %z operand modifier along with the "Jr" constraints ("r" makes the operand a register, and "J" makes it an immediate, but only if its value is 0).
In this case, you want the compiler to print "$0" if the inline asm input operand turns out to be an immediate zero and you want it to print the register containing the operand, if it's not.
We give an error in the latter case, and we shouldn't (GCC also doesn't).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6023
llvm-svn: 221453
Summary:
Improved warning message when using .cpload inside a reorder section and added an error message for using .cpload with Mips16 enabled.
Modified the tests to fit with the changes mentioned above, added a test-case for the N32 ABI in cpload.s and did some reformatting to make the tests easier to read.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5465
llvm-svn: 221447
Summary:
Fixed all of the missing endian conversions that Lang Hames and I identified in
RuntimeDyldMachOARM.h.
Fixed the opcode emission in RuntimeDyldImpl::createStubFunction() for AArch64,
ARM, Mips when the host endian doesn't match the target endian.
PowerPC will need changing if it's opcodes are affected by endianness but I've
left this for now since I'm unsure if this is the case and it's the only path
that specifies the target endian.
This patch fixes MachO_ARM_PIC_relocations.s on a big-endian Mips host. This
is the last of the known issues on this host.
Reviewers: lhames
Reviewed By: lhames
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D6130
llvm-svn: 221446
Use the position of the subsequent symbol in the object file to infer
the size of it's predecessor. I hope to eventually remove whatever COFF
specific details from this little algorithm so that we can unify this
logic with what Mach-O does.
llvm-svn: 221444
When generating gcov compatible profiling, we sometimes skip emitting
data for functions for one reason or another. However, this was
emitting different function IDs in the .gcno and .gcda files, because
the .gcno case was using the loop index before skipping functions and
the .gcda the array index after. This resulted in completely invalid
gcov data.
This fixes the problem by making the .gcno loop track the ID
separately from the loop index.
llvm-svn: 221441
condition to match a blend.
This prevents optimizations that work on VSELECT to perform invalid
transformations. Indeed, the optimized condition does not match the vector
boolean content that is expected and bad things may happen.
This patch yields the exact same code on the whole test-suite + specs (-O3 and
-O3 -march=core-avx2), it improves one test case (vector-blend.ll) and fixes a
bug reduced in vselect-avx.ll.
<rdar://problem/18819506>
llvm-svn: 221429
Remove dynamic relocations of __gxx_personality_v0 from the .eh_frame.
The MIPS64 follow-up of the MIPS32 fix (rL209907).
Patch by Vladimir Stefanovic.
Differential Revision: http://reviews.llvm.org/D6141
llvm-svn: 221408
Added missing memory folding for the (V)CVTDQ2PS instructions - we can safely fold these (but not the (V)CVTDQ2PD versions which have a register/memory size discrepancy in the source operand). I've added a test case demonstrating that stack folding now works.
Differential Revision: http://reviews.llvm.org/D5981
llvm-svn: 221407
Summary:
X86FastISel::fastMaterializeAlloca was incorrectly conditioning its
opcode selection on subtarget bitness rather than pointer size.
Differential Revision: http://reviews.llvm.org/D6136
llvm-svn: 221386
This works around the limitation that PTX does not allow .param space
loads/stores with arbitrary pointers.
If a function has a by-val struct ptr arg, say foo(%struct.x *byval %d), then
add the following instructions to the first basic block :
%temp = alloca %struct.x, align 8
%tt1 = bitcast %struct.x * %d to i8 *
%tt2 = llvm.nvvm.cvt.gen.to.param %tt2
%tempd = bitcast i8 addrspace(101) * to %struct.x addrspace(101) *
%tv = load %struct.x addrspace(101) * %tempd
store %struct.x %tv, %struct.x * %temp, align 8
The above code allocates some space in the stack and copies the incoming
struct from param space to local space. Then replace all occurences of %d
by %temp.
Fixes PR21465.
llvm-svn: 221377
Change `NamedMDNode::getOperator()` from returning `MDNode *` to
returning `Value *`. To reduce boilerplate at some call sites, add a
`getOperatorAsMDNode()` for named metadata that's expected to only
return `MDNode` -- for now, that's everything, but debug node named
metadata (such as llvm.dbg.cu and llvm.dbg.sp) will soon change. This
is part of PR21433.
Note that there's a follow-up patch to clang for the API change.
llvm-svn: 221375
We currently have no infrastructure to support these correctly.
This is accomplished by generating a call to a runtime library function that
aborts at runtime in place of the regular wrapper for such functions. Direct
calls are rewritten in the usual way during traversal of the caller's IR.
We also remove the "split-stack" attribute from such wrappers, as the code
generator cannot currently handle split-stack vararg functions.
llvm-svn: 221360
This matches the format produced by the AMD proprietary driver.
//==================================================================//
// Shell script for converting .ll test cases: (Pass the .ll files
you want to convert to this script as arguments).
//==================================================================//
; This was necessary on my system so that A-Z in sed would match only
; upper case. I'm not sure why.
export LC_ALL='C'
TEST_FILES="$*"
MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r`
for f in $TEST_FILES; do
# Check that there are SI tests:
grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f
if [ $? -eq 0 ]; then
for match in $MATCHES; do
sed -i -e "s/\([ :]$match\)/\L\1/" $f
done
# Try to get check lines with partial instruction names
sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f
fi
done
sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll
sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll
sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll
sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll
sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll
//==================================================================//
// Shell script for converting .td files (run this last)
//==================================================================//
export LC_ALL='C'
sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td
sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td
llvm-svn: 221350
This patch improves the folding of vector AND nodes into blend operations for
targets that feature SSE4.1. A vector AND node where one of the operands is
a constant build_vector with elements that are either zero or all-ones can be
converted into a blend.
This allows for example to simplify the following code:
define <4 x i32> @test(<4 x i32> %A, <4 x i32> %B) {
%1 = and <4 x i32> %A, <i32 0, i32 0, i32 0, i32 -1>
%2 = and <4 x i32> %B, <i32 -1, i32 -1, i32 -1, i32 0>
%3 = or <4 x i32> %1, %2
ret <4 x i32> %3
}
Before this patch llc (-mcpu=corei7) generated:
andps LCPI1_0(%rip), %xmm0, %xmm0
andps LCPI1_1(%rip), %xmm1, %xmm1
orps %xmm1, %xmm0, %xmm0
retq
With this patch we generate a single 'vpblendw'.
llvm-svn: 221343
Some ARM FPUs only have 16 double-precision registers, rather than the
normal 32. LLVM represents this with the D16 target feature. This is
currently used by CodeGen to avoid using high registers when they are
not available, but the assembler and disassembler do not.
I fix this in the assmebler and disassembler rather than the
InstrInfo.td files, as the latter would require a large number of
changes everywhere one of the floating-point instructions is referenced
in the backend. This solution is similar to the one used for
co-processor numbers and MSR masks.
llvm-svn: 221341
Commit 220932 caused crash when building clang-tblgen on aarch64 debian target,
so it's blocking all daily tests.
The std::call_once implementation in pthread has bug for aarch64 debian.
llvm-svn: 221331
Exact shifts may not shift out any non-zero bits. Use computeKnownBits
to determine when this occurs and just return the left hand side.
This fixes PR21477.
llvm-svn: 221325
We currently try to push an even number of registers to preserve 8-byte
alignment during a function's prologue, but only when the stack alignment is
prcisely 8. Many of the reasons for doing it apply also when that alignment > 8
(the extra store is often free, and can save another stack adjustment, though
less frequently for 16-byte stack alignment).
llvm-svn: 221321
We were making an attempt to do this by adding an extra callee-saved GPR (so
that there was an even number in the list), but when that failed we went ahead
and pushed anyway.
This had a couple of potential issues:
+ The .cfi directives we emit misplaced dN because they were based on
PrologEpilogInserter's calculation.
+ Unaligned stores can be less efficient.
+ Unaligned stores can actually fault (likely only an issue in niche cases,
but possible).
This adds a final explicit stack adjustment if all other options fail, so that
the actual locations of the registers match up with where they should be.
llvm-svn: 221320
Divides and remainder operations do not behave like other operations
when they are given poison: they turn into undefined behavior.
It's really hard to know if the operands going into a div are or are not
poison. Because of this, we should only choose to speculate if there
are constant operands which we can easily reason about.
This fixes PR21412.
llvm-svn: 221318
Patch to allow (v)blendps, (v)blendpd, (v)pblendw and vpblendd instructions to be commuted - swaps the src registers and inverts the blend mask.
This is primarily to improve memory folding (see new tests), but it also improves the quality of shuffles (see modified tests).
Differential Revision: http://reviews.llvm.org/D6015
llvm-svn: 221313
change LoopSimplifyPass to be !isCFGOnly. The motivation for the earlier patch
(r221223) was that LoopSimplify is not preserved by instcombine though
setPreservesCFG indicates that it is. This change fixes the issue
by making setPreservesCFG no longer imply LoopSimplifyPass, and is therefore less
invasive.
llvm-svn: 221311
While fixing up the register classes in the machine combiner in a previous
commit I missed one.
This fixes the last one and adds a test case.
llvm-svn: 221308
Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2,
binary increases by 25%.
A large binary inside Google, split-dwarf, -O0, and other internal flags
(GDB index, etc) increases by 1.8%, optimized build is 35%.
The size impact may be somewhat greater in .o files (I haven't measured
that much - since the linked executable -O0 numbers seemed low enough)
due to relocations. These relocations could be removed if we taught the
llvm-symbolizer to handle indexed addressing in the .o file (GDB can't
cope with this just yet, but GDB won't be reading this info anyway).
Also debug_ranges could be shared between .o and .dwo, though ideally
debug_ranges would get a schema that could used index(+offset)
addressing, and move to the .dwo file, then we'd be back to sharing
addresses in the address pool again.
But for now, these sizes seem small enough to go ahead with this.
Verified that no other DW_TAGs are produced into the .o file other than
subprograms and inlined_subroutines.
llvm-svn: 221306
We were producing a relocation for
----------------
.section foo,bar
La:
Lb:
.long La-Lb
--------------
but not for
---------------------
.section foo,bar
zed:
La:
Lb:
.long La-Lb
----------------
This patch handles the case where both fragments are part of the first atom
in a section and there is no corresponding symbol to that atom.
This fixes pr21328.
llvm-svn: 221304
This patch adds 'FeatureSlowSHLD' to 'bdver3'.
According to the official AMD optimization guide for amdfam15: "Using
alternative code in place of SHLD achieves lower overall latency and
requires fewer execution resources. The 32-bit and 64-bit forms of
ADD, ADC, SHR, and LEA (except 16-bit form) are DirectPath
instructions, while SHLD is a VectorPath instruction."
This patch also explicitly sets feature AVX and SSE4A for all the bdver*
cpus. This part of the patch is a non-functional change and it is mainly
done for clarity reasons (Both XOP and FMA4 already imply AVX and SSE4A).
llvm-svn: 221296
Registers are not all equal. Some are not allocatable (infinite cost),
some have to be preserved but can be used, and some others are just free
to use.
Ensure there is a cost hierarchy reflecting this fact, so that the
allocator will favor scratch registers over callee-saved registers.
llvm-svn: 221293
This patch improves how the different costs (register, interference, spill
and coalescing) relates together. The assumption is now that:
- coalescing (or any other "side effect" of reg alloc) is negative, and
instead of being derived from a spill cost, they use the block
frequency info.
- spill costs are in the [MinSpillCost:+inf( range
- register or interference costs are in [0.0:MinSpillCost( or +inf
The current MinSpillCost is set to 10.0, which is a random value high
enough that the current constraint builders do not need to worry about
when settings costs. It would however be worth adding a normalization
step for register and interference costs as the last step in the
constraint builder chain to ensure they are not greater than SpillMinCost
(unless this has some sense for some architectures). This would work well
with the current builder pipeline, where all costs are tweaked relatively
to each others, but could grow above MinSpillCost if the pipeline is
deep enough.
The current heuristic is tuned to depend rather on the number of uses of
a live interval rather than a density of uses, as used by the greedy
allocator. This heuristic provides a few percent improvement on a number
of benchmarks (eembc, spec, ...) and will definitely need to change once
spill placement is implemented: the current spill placement is really
ineficient, so making the cost proportionnal to the number of use is a
clear win.
llvm-svn: 221292
Summary:
Appropriately set/clear the FeatureBit for Mips16 when these assembler directives are used and also emit ".set nomips16" (previously, only ".set mips16" was being emitted).
These improvements allow for better testing of the .cpload/.cprestore assembler directives (which are not supposed to work when Mips16 is enabled).
Test Plan: The test is bare-bones because there are no MC tests for Mips16 instructions (there's only one, which checks that the Mips16 ELF header flag gets set), and that suggests to me that it has not been implemented yet in the IAS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5462
llvm-svn: 221277
This is experimental, just barely enough to get things to not
immediately combust.
A note for those who are curious:
Only lld can successfully link the object files, other linkers truncate
the section names making the debug sections illegible to debuggers.
Even with this in mind, we believe we are having trouble with SECREL
relocations.
llvm-svn: 221245
1>C:\Program Files (x86)\Windows Kits\8.1\Include\um\minwinbase.h(46):
error C2146: syntax error : missing ';' before identifier 'nLength'
1>C:\Program Files (x86)\Windows Kits\8.1\Include\um\minwinbase.h(46):
error C4430: missing type specifier - int assumed. Note: C++ does not support default-int
...
including <windows.h> is actually required.
llvm-svn: 221244
preserve LoopSimplify because instcombine may replace branch predicates
with undef which loop simplify then replaces with always exit. Replace
setPreservesCFG with the more constrained preservation of DomTree and
LoopInfo.
llvm-svn: 221223
LoadCombine can be smarter about aborting when a writing instruction is
encountered, instead of aborting upon encountering any writing instruction, use
an AliasSetTracker, and only abort when encountering some write that might
alias with the loads that could potentially be combined.
This was originally motivated by comments made (and a test case provided) by
David Majnemer in response to PR21448. It turned out that LoadCombine was not
responsible for that PR, but LoadCombine should also be improved so that
unrelated stores (and @llvm.assume) don't interrupt load combining.
llvm-svn: 221203
This generalizes the range handling for ranges in both the skeleton and
full unit, laying the foundation for the addition of more ranges (rather
than just the CU's special case) in the skeleton CU with fission+gmlt.
llvm-svn: 221202
FoldOpIntoPhi could create an infinite loop if the PHI could potentially
reach a BB it was considering inserting instructions into. The
instructions it would insert would eventually lead to other combines
firing which would, again, lead to FoldOpIntoPhi firing.
The solution is to handicap FoldOpIntoPhi so that it doesn't attempt to
insert instructions that the PHI might reach.
This fixes PR21377.
llvm-svn: 221187
So that it may be shared between skeleton/full compile unit, for CU
ranges and other ranges to be added for fission+gmlt.
(at some point we might want some kind of object shared between the
skeleton and full compile units for all those things we only want one of
in that scope, rather than having the full unit always look through to
the skeleton... - alternatively, we might be able to have the skeleton
pointer (or another, separate pointer) point to the skeleton or to the
unit itself in non-fission, so we don't have to special case its
absence)
llvm-svn: 221186
This is one of a few steps to generalize range handling to include the
CU range (thus the CU's range list will be moved into the range list
list, losing track of the base address in the process), which means
generalizing ranges from both the skeleton and full unit under fission.
And... then I can used that generalized support for ranges in
fission+gmlt where there'll be a bunch more ranges in the skeleton.
llvm-svn: 221182
register class tGPRRegClass if the target is thumb1.
This commit fixes a crash that occurs during register allocation which was
triggered when a virtual register defined by an inline-asm instruction had to
be spilled.
rdar://problem/18740489
llvm-svn: 221178
For 8-bit divrems where the remainder is used, we used to generate:
divb %sil
shrw $8, %ax
movzbl %al, %eax
That was to avoid an H-reg access, which is problematic mainly because
it isn't possible in REX-prefixed instructions.
This patch optimizes that to:
divb %sil
movzbl %ah, %eax
To do that, we explicitly extend AH, and extract the L-subreg in the
resulting register. The extension is done using the NOREX variants of
MOVZX. To support signed operations, MOVSX_NOREX is also added.
Further, this introduces a new SDNode type, [us]divrem_ext_hreg, which is
then lowered to a sequence containing a single zext (rather than 2).
Differential Revision: http://reviews.llvm.org/D6064
llvm-svn: 221176
EarlyCSE uses a simple generation scheme for handling memory-based
dependencies, and calls to @llvm.assume (which are marked as writing to memory
to ensure the preservation of control dependencies) disturb that scheme
unnecessarily. Skipping calls to @llvm.assume is legal, and the alternative
(adding AA calls in EarlyCSE) is likely undesirable (we have GVN for that).
Fixes PR21448.
llvm-svn: 221175
call DAGCombiner. But we ran into a case (on Windows) where the
calling convention causes argument lowering to bail out of fast-isel,
and we end up in CodeGenAndEmitDAG() which does run DAGCombiner.
So, we need to make DAGCombiner check for 'optnone' after all.
Commit includes the test that found this, plus another one that got
missed in the original optnone work.
llvm-svn: 221168
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove its definition and
update appropriate tests.
LLVM defines both a cortex-a9 CPU and a cortex-a9-mp CPU. The only
difference between the two CPU definitions in ARM.td is that
cortex-a9-mp contains the feature FeatureMP for multiprocessing
extensions.
This is redundant since the Cortex-A9 is defined as having
multiprocessing extensions in the TRMs. armcc also defines the
Cortex-A9 as having multiprocessing extensions by default.
Change-Id: Ifcadaa6c322be0a33d9d2a39cfdd7da1d75981a7
llvm-svn: 221166
Some literals in the AArch64 backend had 15 'f's rather than 16, causing
comparisons with a constant 0xffffffffffffffff to be miscompiled.
llvm-svn: 221157
Hexagon was not calling InitializeELF and could not select between
ctors and init_array.
Phabricator revision: http://reviews.llvm.org/D6061
llvm-svn: 221156
The MRI scripts have to work with CRLF, and in general it is probably
a good idea to support this in a core utility like LineIterator.
llvm-svn: 221153
When LLVM emits DWARF call frame information, it currently creates a local,
section-relative symbol in the code section, which is pointed to by a
relocation on the .eh_frame section. However, for C++ we emit some functions in
section groups, and the SysV ABI has some rules to make it easier to remove
these sections
(http://www.sco.com/developers/gabi/latest/ch4.sheader.html#section_group_rules):
A symbol table entry with STB_LOCAL binding that is defined relative to one
of a group's sections, and that is contained in a symbol table section that is
not part of the group, must be discarded if the group members are discarded.
References to this symbol table entry from outside the group are not allowed.
This means that we need to use the function symbol for the relocation, not a
temporary symbol.
There was a comment in the code claiming that the local symbol was used to
avoid creating a relocation, but a relocation must be created anyway as the
code and CFI are in different sections.
llvm-svn: 221150
The problem is mostly that variadic output instruction
aren't handled, so it is rejected for having an inconsistent
number of operands, and then the right number of operands
isn't emitted.
llvm-svn: 221117
The issue was that linkAppendingVarProto does the full linking job, including
deleting the old dst variable. The fix is just to call it and return early
if we have a GV with appending linkage.
original message:
Refactor duplicated code in liking GlobalValues.
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
llvm-svn: 221098
This commit introduces heap-use-after-free detected by ASan. Here is the output
for one of several tests that detect it:
******************** TEST 'LLVM :: Linker/AppendingLinkage.ll' FAILED ********************
Command Output (stderr):
--
=================================================================
==2122==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c00000b9c8 at pc 0x0000005d05d1 bp 0x7fff64ed27c0 sp 0x7fff64ed27b8
READ of size 4 at 0x60c00000b9c8 thread T0
#0 0x5d05d0 in llvm::GlobalValue::setUnnamedAddr(bool) /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115:35
#1 0x69fff1 in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1041:5
#2 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#3 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#4 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#5 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
#6 0x41eb71 in _start (/usr/local/google/home/chandlerc/src/llvm/build/bin/llvm-link+0x41eb71)
0x60c00000b9c8 is located 72 bytes inside of 128-byte region [0x60c00000b980,0x60c00000ba00)
freed by thread T0 here:
#0 0x4a1e6b in operator delete(void*) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:94:3
#1 0x5d1a7a in llvm::iplist<llvm::GlobalVariable, llvm::ilist_traits<llvm::GlobalVariable> >::erase(llvm::ilist_iterator<llvm::GlobalVariable>) /usr/local/google/home/chandlerc/src/llvm/build/../inclu
de/llvm/ADT/ilist.h:466:5
#2 0x5d1980 in llvm::GlobalVariable::eraseFromParent() /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/Globals.cpp:204:3
#3 0x6a8a4d in (anonymous namespace)::ModuleLinker::linkAppendingVarProto(llvm::GlobalVariable*, llvm::GlobalVariable const*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.
cpp:980:3
#4 0x6a7403 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1074:11
#5 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#6 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#7 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#8 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#9 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
previously allocated by thread T0 here:
#0 0x4a192b in operator new(unsigned long) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:62:35
#1 0x61d85c in llvm::User::operator new(unsigned long, unsigned int) /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/User.cpp:57:19
#2 0x6a7525 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1100:3
#3 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#4 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#5 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#6 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#7 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
SUMMARY: AddressSanitizer: heap-use-after-free /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115 llvm::GlobalValue::setUnnamedAddr(bool)
Shadow bytes around the buggy address:
0x0c187fff96e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff96f0: 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa fa
0x0c187fff9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fa
0x0c187fff9710: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff9720: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
=>0x0c187fff9730: fd fd fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd
0x0c187fff9740: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9750: fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa fa
0x0c187fff9760: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c187fff9770: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
ASan internal: fe
==2122==ABORTING
llvm-svn: 221096
Currently we only need to emit skeleton strings into the CU header and
we do this by explicitly calling "addLocalString". With gmlt-in-fission,
we'll be emitting a bunch of other strings from other codepaths where
it's not statically known that these strings will be local or not.
Introduce a virtual function to indicate whether this unit is a DWO unit
or not (I'm not sure if we have a good term for this, the
opposite/alternative to 'skeleton' unit) and use that to generalize the
string emission logic so that strings can be correctly emitted in both
the skeleton and dwo unit when in split dwarf mode.
And to demonstrate that this works, switch the existing special callers
of addLocalString in the skeleton builder to addString - and they still
work. Yay.
llvm-svn: 221094
This is a useful distinction/invariant/delination to make because
LineTablesOnly mode is never relevant to type units, so it's clear that
we're not doing weird line-tables-only-with-types by making this API
choice.
It also lays the foundations nicely for adding gmlt-like data to fission
skeleton CUs while limiting the effects to CUs and not TUs.
llvm-svn: 221093
(these will shortly become virtual, with a null implementation in
DwarfUnit (since type units don't have accelerator tables in the current
schema) and the current implementation down in DwarfCompileUnit, moving
the actual maps there too)
llvm-svn: 221082
r221056 "[mips] Move F128 argument handling into MipsCCState as we did for returns. NFC."
r221058 "[mips] Fix unused variable warning introduced in r221056"
r221059 "[mips] Move all ByVal handling into CCState and tablegen-erated code. NFC."
r221061 "Renamed CCState members that appear to misspell 'Processed' as 'Proceed'. NFC."
It cuased an undefined behavior in LLVM :: CodeGen/Mips/return-vector.ll.
llvm-svn: 221081
This would help catch cases where we might otherwise try to reference a
dwo CU label, which would be weird - because without relocations in the
dwo file it's not generally meaningful to talk about the CU offsets
there (or, if it is, we can do so in absolute terms without using a
relocation to compute it).
llvm-svn: 221078
This allows the CU label to be emitted only for compile units, as
they're the only ones that need it (so they can be referenced from
pubnames)
llvm-svn: 221072
m_ZExt might bind against a ConstantExpr instead of an Instruction.
Assuming this, using cast<Instruction>, results in InstCombine crashing.
Instead, introduce ZExtOperator to bridge both Instruction and
ConstantExpr ZExts.
This fixes PR21445.
llvm-svn: 221069
This was a compile-unit specific label (unused in type units) and seems
unnecessary anyway when we can more easily directly compute the size of
the compile unit.
llvm-svn: 221067
Summary:
CCState already contains a byval implementation that is very similar to the
Mips custom code. This patch merges the custom code into the existing
common code and tablegen-erated code.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D5977
llvm-svn: 221059
Summary:
There are a couple more changes to make before analyzeFormalArguments can
be merged into the standard AnalyzeFormalArguments. I've had to temporarily
poke a couple holes in MipsCCState's encapsulation to save having to make
all the required changes for this merge all at once*. These will be removed
shortly.
* We must merge our ByVal argument handling with the implementation in CCState.
This will be done over the next three patches, then the fourth will merge
analyzeFormalArguments with AnalyzeFormalArguments.
Depends on D5967
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5969
llvm-svn: 221056
Type units no longer have skeletons and it's misleading to be able to
query for a type unit's skeleton (it might incorrectly lead one to
conclude that if a unit doesn't have a skeleton it's not in a .dwo
file... ).
llvm-svn: 221055
Summary:
It's now passed in as an argument to functions that need it. Eventually
this argument will be replaced by the 'this' pointer for a MipsCCState
object.
Depends on D5966
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5967
llvm-svn: 221054
Summary:
There is one remaining trace of it in MipsCC::analyzeCallOperands() where
Mips16 might override the calling convention. This will moved into
tablegen-erated code later.
Depends on D5965
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5966
llvm-svn: 221053
Summary:
CustomCallingConv is simply a CallingConv that tablegen should not generate the
implementation for. It allows regular CallingConv's to delegate to these custom
functions. This is (currently) necessary for Mips and we cannot use CCCustom
without having to adapt to the different API that CCCustom uses.
This brings us a bit closer to being able to remove
MipsCC::analyzeCallOperands and MipsCC::analyzeFormalArguments in favour of
the common implementation.
No functional change to the targets.
Depends on D3341
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: vmedic, llvm-commits
Differential Revision: http://reviews.llvm.org/D5965
llvm-svn: 221052
This is the first big step to allowing gmlt-like inline scope
information in the skeleton CU. While this commit doesn't change the
functionality, it's only a small step to call
"constructAbstractSubprogramDIE" on both the InfoHolder and the
SkeletonHolder (when in use) and that will at least create the abstract
SP dies in that case, though still not creating the other subprograms.
llvm-svn: 221051
This removes calls to isMaterializable in the following cases:
* It was redundant with a call to isDeclaration now that isDeclaration returns
the correct answer for materializable functions.
* It was followed by a call to Materialize. Just call Materialize and check EC.
llvm-svn: 221050
This can happen pretty often in code that looks like:
int foo = bar - 1;
if (foo < 0)
do stuff
In this case, bar < 1 is an equivalent condition.
This transform requires that the add instruction be annotated with nsw.
llvm-svn: 221045
getDISubprogram was mistakenly thought to contain a bug: we thought we
might need to try harder if we found a DebugLoc we didn't find.
llvm-svn: 221044
Summary:
This patch extends the 'show' and 'merge' commands in llvm-profdata to handle
sample PGO formats. Using the 'merge' command it is now possible to convert
one sample PGO format to another.
The only format that is currently not working is 'gcc'. I still need to
implement support for it in lib/ProfileData.
The changes in the sample profile support classes are needed for the
merge operation.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6065
llvm-svn: 221032
"[x86] Simplify vector selection if condition value type matches vselect value type and true value is all ones or false value is all zeros."
llvm-svn: 221028
Change `Instruction::getAllMetadata()` to modify a vector of `Value`
instead of `MDNode` and update call sites. This is part of PR21433.
llvm-svn: 221027
Change `Instruction::getMetadata()` to return `Value` as part of
PR21433.
Update most callers to use `Instruction::getMDNode()`, which wraps the
result in a `cast_or_null<MDNode>`.
llvm-svn: 221024
Add `Instruction::getMDNode()` that casts to `MDNode` before changing
`Instruction::getMetadata()` to return `Value`. This avoids adding
`cast_or_null<MDNode>` boiler-plate throughout the code.
Part of PR21433.
llvm-svn: 221023
It appears to ignore or find ambiguous MachineInstrBuilder's conversion
operators that allow conversion to MachineInstr* and
MachineBasicBlock::bundle_iterator.
As a workaround, add an explicit way to get the MachineInstr.
llvm-svn: 221017
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
llvm-svn: 221014
The getBinary and getBuffer method now return ordinary pointers of appropriate
const-ness. Ownership is transferred by calling takeBinary(), which returns a
pair of the Binary and a MemoryBuffer.
llvm-svn: 221003
We need to figure out how to track ptrtoint values all the
way until result is converted back to a pointer in order
to correctly rewrite the pointer type.
llvm-svn: 220997
Now that we have initial support for VSX, we can begin adding
intrinsics for programmer access to VSX instructions. This patch adds
basic support for VSX intrinsics in general, and tests it by
implementing intrinsics for minimum and maximum for the vector double
data type.
The LLVM portion of this is quite straightforward. There is a
companion patch for Clang.
llvm-svn: 220988
Our internal test reveals such case should not be transformed:
cmp x17, #3
b.lt .LBB10_15
...
subs x12, x12, #1
b.gt .LBB10_1
where x12 is a liveout, becomes:
cmp x17, #2
b.le .LBB10_15
...
subs x12, x12, #2
b.ge .LBB10_1
Unable to provide test case as it's difficult to reproduce on community branch.
http://reviews.llvm.org/D6048
Patch by Zhaoshi Zheng <zhaoshiz@codeaurora.org>!
llvm-svn: 220987
This patch adds an optimization in CodeGenPrepare to move an extractelement
right before a store when the target can combine them.
The optimization may promote any scalar operations to vector operations in the
way to make that possible.
** Context **
Some targets use different register files for both vector and scalar operations.
This means that transitioning from one domain to another may incur copy from one
register file to another. These copies are not coalescable and may be expensive.
For example, according to the scheduling model, on cortex-A8 a vector to GPR
move is 20 cycles.
** Motivating Example **
Let us consider an example:
define void @foo(<2 x i32>* %addr1, i32* %dest) {
%in1 = load <2 x i32>* %addr1, align 8
%extract = extractelement <2 x i32> %in1, i32 1
%out = or i32 %extract, 1
store i32 %out, i32* %dest, align 4
ret void
}
As it is, this IR generates the following assembly on armv7:
vldr d16, [r0] @vector load
vmov.32 r0, d16[1] @ cross-register-file copy: 20 cycles
orr r0, r0, #1 @ scalar bitwise or
str r0, [r1] @ scalar store
bx lr
Whereas we could generate much faster code:
vldr d16, [r0] @ vector load
vorr.i32 d16, #0x1 @ vector bitwise or
vst1.32 {d16[1]}, [r1:32] @ vector extract + store
bx lr
Half of the computation made in the vector is useless, but this allows to get
rid of the expensive cross-register-file copy.
** Proposed Solution **
To avoid this cross-register-copy penalty, we promote the scalar operations to
vector operations. The penalty will be removed if we manage to promote the whole
chain of computation in the vector domain.
Currently, we do that only when the chain of computation ends by a store and the
target is able to combine an extract with a store.
Stores are the most likely candidates, because other instructions produce values
that would need to be promoted and so, extracted as some point[1]. Moreover,
this is customary that targets feature stores that perform a vector extract (see
AArch64 and X86 for instance).
The proposed implementation relies on the TargetTransformInfo to decide whether
or not it is beneficial to promote a chain of computation in the vector domain.
Unfortunately, this interface is rather inaccurate for this level of details and
although this optimization may be beneficial for X86 and AArch64, the inaccuracy
will lead to the optimization being too aggressive.
Basically in TargetTransformInfo, everything that is legal has a cost of 1,
whereas, even if a vector type is legal, usually a vector operation is slightly
more expensive than its scalar counterpart. That will lead to too many
promotions that may not be counter balanced by the saving of the
cross-register-file copy. For instance, on AArch64 this penalty is just 4
cycles.
For now, the optimization is just enabled for ARM prior than v8, since those
processors have a larger penalty on cross-register-file copies, and the scope is
limited to basic blocks. Because of these two factors, we limit the effects of
the inaccuracy. Indeed, I did not want to build up a fancy cost model with block
frequency and everything on top of that.
[1] We can imagine targets that can combine an extractelement with other
instructions than just stores. If we want to go into that direction, the current
interfaces must be augmented and, moreover, I think this becomes a global isel
problem.
Differential Revision: http://reviews.llvm.org/D5921
<rdar://problem/14170854>
llvm-svn: 220978
Tested this by #if 0'ing out the pthreads implementation, which
indicated that this fallback was not currently compiling successfully
and applying this patch resolves that.
Patch by Andy Chien.
llvm-svn: 220969
In a case where we have a no {un,}signed wrap flag on the increment, if
RHS - Start is constant then we can avoid inserting a max operation bewteen
the two, since we can statically determine which is greater.
This allows us to unroll loops such as:
void testcase3(int v) {
for (int i=v; i<=v+1; ++i)
f(i);
}
llvm-svn: 220960
Since block address values can be larger than 2GB in 64-bit code, they
cannot be loaded simply using an @l / @ha pair, but instead must be
loaded from the TOC, just like GlobalAddress, ConstantPool, and
JumpTable values are.
The commit also fixes a bug in PPCLinuxAsmPrinter::doFinalization where
temporary labels could not be used as TOC values, since code would
attempt (and fail) to use GetOrCreateSymbol to create a symbol of the
same name as the temporary label.
llvm-svn: 220959
r212242 introduced a legalizer hook, originally to let AArch64 widen
v1i{32,16,8} rather than scalarize, because the legalizer expected, when
scalarizing the result of a conversion operation, to already have
scalarized the operands. On AArch64, v1i64 is legal, so that commit
ensured operations such as v1i32 = trunc v1i64 wouldn't assert.
It did that by choosing to widen v1 types whenever possible. However,
v1i1 types, for which there's no legal widened type, would still trigger
the assert.
This commit fixes that, by only scalarizing a trunc's result when the
operand has already been scalarized, and introducing an extract_elt
otherwise.
This is similar to r205625.
Fixes PR20777.
llvm-svn: 220937
Earlier this summer I fixed an issue where we were incorrectly combining
multiple loads that had different constraints such alignment, invariance,
temporality, etc. Apparently in one case I made copt paste error and swapped
alignment and invariance.
Tests included.
rdar://18816719
llvm-svn: 220933
Summary:
This patch adds an llvm_call_once which is a wrapper around std::call_once on platforms where it is available and devoid of bugs. The patch also migrates the ManagedStatic mutex to be allocated using llvm_call_once.
These changes are philosophically equivalent to the changes added in r219638, which were reverted due to a hang on Win32 which was the result of a bug in the Windows implementation of std::call_once.
Reviewers: aaron.ballman, chapuni, chandlerc, rnk
Reviewed By: rnk
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D5922
llvm-svn: 220932
The langref says:
LLVM explicitly allows declarations of global variables to be marked
constant, even if the final definition of the global is not. This
capability can be used to enable slightly better optimization of the
program, but requires the language definition to guarantee that
optimizations based on the ‘constantness’ are valid for the
translation units that do not include the definition.
Given that definition, when merging two declarations, we have to drop
constantness if of of them is not marked contant, since the Module
without the constant marker might not have the necessary guarantees.
llvm-svn: 220927
If we load from a location with range metadata, we can use information about the ranges of the loaded value for optimization purposes. This helps to remove redundant checks and canonicalize checks for other optimization passes. This particular patch checks whether a value is known to be non-zero from the range metadata.
Currently, these tests are against InstCombine. In theory, all of these should be InstSimplify since we're not inserting any new instructions. Moving the code may follow in a separate change.
Reviewed by: Hal
Differential Revision: http://reviews.llvm.org/D5947
llvm-svn: 220925
Summary:
This patch finishes up support for handling sampling profiles in both
text and binary formats. The new binary format uses uleb128 encoding to
represent numeric values. This makes profiles files about 25% smaller.
The profile writer class can write profiles in the existing text and the
new binary format. In subsequent patches, I will add the capability to
read (and perhaps write) profiles in the gcov format used by GCC.
Additionally, I will be adding support in llvm-profdata to manipulate
sampling profiles.
There was a bit of refactoring needed to separate some code that was in
the reader files, but is actually common to both the reader and writer.
The new test checks that reading the same profile encoded as text or
raw, produces the same results.
Reviewers: bogner, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6000
llvm-svn: 220915
Summary:
The previous calling convention prevented custom functions from being able
to access argument labels unless it knew how many variadic arguments there
were, and of which type. This restriction made it impossible to correctly
model functions in the printf family, as it is legal to pass more arguments
than required to those functions. We now pass arguments in the following order:
non-vararg arguments
labels for non-vararg arguments
[if vararg function, pointer to array of labels for vararg arguments]
[if non-void function, pointer to label for return value]
vararg arguments
Differential Revision: http://reviews.llvm.org/D6028
llvm-svn: 220906
* Added LLVM libraries required for IntelJITEvents to LLVMBuild.txt.
* Removed 'jit' library from llvm-jitlistener.
* Added support for OptionalLibraries to llvm-build cmake files generator.
Patch by aleksey.a.bader@intel.com
Differential Revision: http://reviews.llvm.org/D5646
llvm-svn: 220848
This restores the commit from SVN r219899 with an additional change to ensure
that the CodeGen is correct for the case that was identified as being incorrect
(originally PR7272).
In the case that during inlining we need to synthesize a value on the stack
(i.e. for passing a value byval), then any function involving that alloca must
be stripped of its tailness as the restriction that it does not access the
parent's stack no longer holds. Unfortunately, a single alloca can cause a
rippling effect through out the inlining as the value may be aliased or may be
mutated through an escaped external call. As such, we simply track if an alloca
has been introduced in the frame during inlining, and strip any tail calls.
llvm-svn: 220811
This transformation worked if selector is produced by SETCC, however SETCC is needed only if we consider to swap operands. So I replaced SETCC check for this case.
Added tests for vselect of <X x i1> values.
llvm-svn: 220777
Ffter commit at rev219046 512-bit broadcasts lowering become non-optimal. Most of tests on broadcasting and embedded broadcasting were changed and they doesn’t produce efficient code.
Example below is from commit changes (it’s the first test from test/CodeGen/X86/avx512-vbroadcast.ll):
define <16 x i32> @_inreg16xi32(i32 %a) {
; CHECK-LABEL: _inreg16xi32:
; CHECK: ## BB#0:
-; CHECK-NEXT: vpbroadcastd %edi, %zmm0
+; CHECK-NEXT: vmovd %edi, %xmm0
+; CHECK-NEXT: vpbroadcastd %xmm0, %ymm0
+; CHECK-NEXT: vinserti64x4 $1, %ymm0, %zmm0, %zmm0
; CHECK-NEXT: retq
%b = insertelement <16 x i32> undef, i32 %a, i32 0
%c = shufflevector <16 x i32> %b, <16 x i32> undef, <16 x i32> zeroinitializer
ret <16 x i32> %c
}
Here, 256-bit broadcast was generated instead of 512-bit one.
In this patch
1) I added vector-shuffle lowering through broadcasts
2) Removed asserts and branches likes because this is incorrect
- assert(Subtarget->hasDQI() && "We can only lower v8i64 with AVX-512-DQI");
3) Fixed lowering tests
llvm-svn: 220774
This is a Microsoft calling convention that supports both x86 and x86_64
subtargets. It passes vector and floating point arguments in XMM0-XMM5,
and passes them indirectly once they are consumed.
Homogenous vector aggregates of up to four elements can be passed in
sequential vector registers, but this part is not implemented in LLVM
and will be handled in Clang.
On 32-bit x86, it is similar to fastcall in that it uses ecx:edx as
integer register parameters and is callee cleanup. On x86_64, it
delegates to the normal win64 calling convention.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D5943
llvm-svn: 220745
Benchmarks have shown that it's harmless to the performance there, and having a
unified set of passes between the two cores where possible helps big.LITTLE
deployment.
Patch by Z. Zheng.
llvm-svn: 220744
I noticed that it was untested, and forcing it on caused some tests to fail:
LLVM :: Linker/metadata-a.ll
LLVM :: Linker/prefixdata.ll
LLVM :: Linker/type-unique-odr-a.ll
LLVM :: Linker/type-unique-simple-a.ll
LLVM :: Linker/type-unique-simple2-a.ll
LLVM :: Linker/type-unique-simple2.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/unnamed-addr1-a.ll
LLVM :: Linker/visibility1.ll
If it is to be resurrected, it has to be fixed and we should probably have a
-preserve-source command line option in llvm-mc and run tests with and without
it.
llvm-svn: 220741
No functionality change. No change in X86.td.expanded except that we only set
the CD8 attributes for the memory variants. (This shouldn't be used unless we
have a memory operand.)
llvm-svn: 220736
1) i512mem -> f512mem (this is the packed FP input being permuted)
2) element size is 64 bits in EVEX_CD8 for PD.
(A good illustration why X86VectorVTInfo is useful)
llvm-svn: 220734
For a call to not return in to the stackmap shadow, the shadow must end with the call.
To do this, we must insert any required nops *before* the call, and not after it.
llvm-svn: 220728
This is a minor change to use the immediate version when the operand is a null
value. This should get rid of an unnecessary 'mov' instruction in debug
builds and align the code more with the one generated by SelectionDAG.
This fixes rdar://problem/18785125.
llvm-svn: 220713
To avoid emitting too many nops, a stackmap shadow can include emitted instructions in the shadow, but these must not include branch targets.
A return from a call should count as a branch target as patching over the instructions after the call would lead to incorrect behaviour for threads currently making that call, when they return.
llvm-svn: 220710
The pattern matching for a 'ConstantInt' value was too restrictive. Checking for
a 'Constant' with a bull value is sufficient for using an 'cbz/cbnz' instruction.
This fixes rdar://problem/18784732.
llvm-svn: 220709
This fixes a bug where the input register was not defined for the 'tbz/tbnz'
instruction. This happened, because we folded the 'and' instruction from a
different basic block.
This fixes rdar://problem/18784013.
llvm-svn: 220704
At higher optimization levels the LLVM IR may contain more complex patterns for
loads/stores from/to frame indices. The 'computeAddress' function wasn't able to
handle this and triggered an assertion.
This fix extends the possible addressing modes for frame indices.
This fixes rdar://problem/18783298.
llvm-svn: 220700
sets as keys into a cache of interference matrice values in the Interference
constraint adder.
Creating interference matrices was one of the large remaining time-sinks in
PBQP. Caching them reduces the total compile time (when using PBQP) on the
nightly test suite by ~10%.
llvm-svn: 220688
Currently, the ARM backend will select the VMAXNM and VMINNM for these C
expressions:
(a < b) ? a : b
(a > b) ? a : b
but not these expressions:
(a > b) ? b : a
(a < b) ? b : a
This patch allows all of these expressions to be matched.
llvm-svn: 220671
We used to always vectorize (slp and loop vectorize) in the LTO pass pipeline.
r220345 changed it so that we used the PassManager's fields 'LoopVectorize' and
'SLPVectorize' out of the desire to be able to disable vectorization using the
cl::opt flags 'vectorize-loops'/'slp-vectorize' which the before mentioned
fields default to.
Unfortunately, this turns off vectorization because those fields
default to false.
This commit adds flags to the LTO library to disable lto vectorization which
reconciles the desire to optionally disable vectorization during LTO and
the desired behavior of defaulting to enabled vectorization.
We really want tools to set PassManager flags directly to enable/disable
vectorization and not go the route via cl::opt flags *in*
PassManagerBuilder.cpp.
llvm-svn: 220652
This is a simple fix that brings the compilation time from 5min to 5s
on a specific real-world example. It's a large chain of computation in
a crypto routine (always a problem for SCEV). A unit test is not
feasible and there would be no way to check it. The fix is just basic
good practice for dealing with SCEVs, there's no risk of regression.
Patch by Daniel Reynaud!
llvm-svn: 220622
The dividend in "signed % unsigned" is treated as unsigned instead of signed,
causing unexpected behavior such as -64 % (uint64_t)24 == 0.
Added a regression test in split-gep.ll
Patched by Hao Liu.
llvm-svn: 220618
The two operands of the new OR expression should be NextInChain and TheOther
instead of the two original operands.
Added a regression test in split-gep.ll.
Hao Liu reported this bug, and provded the test case and an initial patch.
Thanks!
llvm-svn: 220615
Tidied up some entries in the folding tables so that they are under the correct comment section (they were categorised as AVX2 instructions when they're AVX1).
Minor patch agreed with qcolombet.
llvm-svn: 220613
These asserts can trigger if the worklist iteration order is
sufficiently unlucky. Instead of adding special case logic to handle
these edge conditions, just bail out on trying to transform them:
InstSimplify will get them when it reaches them on the worklist.
This fixes PR21378.
N.B. No test case is included because any test would rely on the
fragile worklist iteration order.
llvm-svn: 220612
Summary:
Fixes PR21100 which is caused by inconsistency between the declared return type
and the expected return type at the call site. The new behavior is consistent
with nvcc and the NVPTXTargetLowering::getPrototype function.
Test Plan: test/Codegen/NVPTX/vector-return.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D5612
llvm-svn: 220607
In a Mach-O object file a relocatable expression of the form
SymbolA - SymbolB + constant is allowed when both symbols are
defined in a section. But when either symbol is undefined it
is an error.
The code was crashing when it had an undefined symbol in this case.
And should have printed a error message using the location information
in the relocation entry.
rdar://18678402
llvm-svn: 220599
So that it has access to getOrCreateGlobalVariableDIE. If we ever support
decsribing using directive in C++ classes (thus requiring support in type
units), it will certainly use another mechanism anyway.
Differential Revision: http://reviews.llvm.org/D5975
llvm-svn: 220594
Minor patch to fix an issue in XFormVExtractWithShuffleIntoLoad where a load is unary shuffled, then bitcast (to a type with the same number of elements) before extracting an element.
An undef was created for the second shuffle operand using the original (post-bitcasted) vector type instead of the pre-bitcasted type like the rest of the shuffle node - this was then causing an assertion on the different types later on inside SelectionDAG::getVectorShuffle.
Differential Revision: http://reviews.llvm.org/D5917
llvm-svn: 220592
Modified library structure to deal with circular dependency between HexagonInstPrinter and HexagonMCInst.
Adding encoding bits for add opcode.
Adding llvm-mc tests.
Removing unit tests.
http://reviews.llvm.org/D5624
llvm-svn: 220584
To do this, change the representation of lazy loaded functions.
The previous representation cannot differentiate between a function whose body
has been removed and one whose body hasn't been read from the .bc file. That
means that in order to drop a function, the entire body had to be read.
llvm-svn: 220580
(part of refactoring to allow subprogram emission in both the skeleton
and main units to enable -gmlt-like data to be included in the skeleton
for live inlined backtracing purposes)
llvm-svn: 220578
This is a first step for generating SSE rsqrt instructions for
reciprocal square root calcs when fast-math is allowed.
For now, be conservative and only enable this for AMD btver2
where performance improves significantly - for example, 29%
on llvm/projects/test-suite/SingleSource/Benchmarks/BenchmarkGame/n-body.c
(if we convert the data type to single-precision float).
This patch adds a two constant version of the Newton-Raphson
refinement algorithm to DAGCombiner that can be selected by any target
via a parameter returned by getRsqrtEstimate()..
See PR20900 for more details:
http://llvm.org/bugs/show_bug.cgi?id=20900
Differential Revision: http://reviews.llvm.org/D5658
llvm-svn: 220570
Summary:
No functional change yet, it's just an object replacement for an enum.
It will allow us to gather ABI information in a single place so that we can
start testing for properties of the ABI's instead of the ABI itself.
For example we will eventually be able to use:
ABI.MinStackAlignmentInBytes()
instead of:
(isABI_N32() || isABI_N64()) ? 16 : 8
which is clearer and more maintainable.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3341
llvm-svn: 220568
Summary:
i32 is always promoted to i64 so it no longer makes sense to assign i32 to
registers.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5964
llvm-svn: 220561
Summary:
Most structs were fixed by r218451 but those of between >32-bits and
<64-bits remained broken since they were not marked with [ASZ]ExtUpper.
This patch fixes the remaining cases by using
CCPromoteToUpperBitsInType<i64> on i64's in addition to i32 and smaller.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5963
llvm-svn: 220556
This fixes a miscompilation in the AArch64 fast-isel which was
triggered when a branch is based on an icmp with condition eq or ne,
and type i1, i8 or i16. The cbz instruction compares the whole 32-bit
register, so values with the bottom 1, 8 or 16 bits clear would cause
the wrong branch to be taken.
llvm-svn: 220553
This is asm/diasm-only support, similar to AVX.
For ISeling the register variant, they are no different from 213 other than
whether the multiplication or the addition operand is destructed.
For ISeling the memory variant, i.e. to fold a load, they are no different
than the 132 variant. The addition operand (op3) in both cases can come from
memory. Again the ony difference is which operand is destructed.
There could be a post-RA pass that would convert a 213 or 132 into a 231.
Part of <rdar://problem/17082571>
llvm-svn: 220540
This multiclass generates the different forms: 213, 231, 132 in AVX.
132 in AVX512 is a separate class but I am planning to use this same
multiclass to generate 231 relying on the nice the null_frag trick from AVX to
disable codegen pattern for 231.
No functionality change, no change in X86.td.expanded except for the different
instruction definition names.
llvm-svn: 220539
This adds support for legalization of instructions of the form:
[fp_conv] <1 x i1> %op to <1 x double>
where fp_conv is one of fpto[us]i, [us]itofp. This used to assert
because they were simply missing from the vector operand scalarizer.
A similar problem arose in r190830, with trunc instead.
Fixes PR20778.
Differential Revision: http://reviews.llvm.org/D5810
llvm-svn: 220533
x86's CMPXCHG -> EFLAGS consumer wasn't being recorded as a real EFLAGS
dependency because it was represented by a pair of CopyFromReg(EFLAGS) ->
CopyToReg(EFLAGS) nodes. ScheduleDAG was expecting the source to be an
implicit-def on the instruction, where the result numbers in the DAG and the
Uses list in TableGen matched up precisely.
The Copy notation seems much more robust, so this patch extends ScheduleDAG
rather than refactoring x86.
Should fix PR20376.
llvm-svn: 220529
While refactoring this code I was confused by both the name I had
introduced (addNonArgumentVariable... but it has all this logic to
handle argument numbering and keep things in order?) and by the
redundancy. Seems when I fixed the misordered inlined argument handling,
I didn't realize it was mostly redundant with the argument ordering code
(which I may've also written, I'm not sure). So let's just rely on the
more general case.
The only oddity in output this produces is that it means when we emit
all the variables for the current function, we don't track when we've
finished the argument variables and are about to start the local
variables and insert DW_AT_unspecified_parameters (for varargs
functions) there. Instead it ends up after the local variables, scopes,
etc. But this isn't invalid and doesn't cause DWARF consumers problems
that I know of... so we'll just go with that because it makes the code
nice & simple.
(though, let's see what the buildbots have to say about this - *crosses
fingers*)
There will be some cleanup commits to follow to remove the now trivial
wrappers, etc.
llvm-svn: 220527
Currently, @llvm.smul.with.overflow.i8 expands to 9 instructions, where
3 are really needed.
This adds X86ISD::UMUL8/SMUL8 SD nodes, and custom lowers them to
MUL8/IMUL8 + SETO.
i8 is a special case because there is no two/three operand variants of
(I)MUL8, so the first operand and return value need to go in AL/AX.
Also, we can't write patterns for these instructions: TableGen refuses
patterns where output operands don't match SDNode results. In this case,
instructions where the output operand is an implicitly defined register.
A related special case (and FIXME) exists for MUL8 (X86InstrArith.td):
// FIXME: Used for 8-bit mul, ignore result upper 8 bits.
// This probably ought to be moved to a def : Pat<> if the
// syntax can be accepted.
[(set AL, (mul AL, GR8:$src)), (implicit EFLAGS)]
Ideally, these go away with UMUL8, but we still need to improve TableGen
support of implicit operands in patterns.
Before this change:
movsbl %sil, %eax
movsbl %dil, %ecx
imull %eax, %ecx
movb %cl, %al
sarb $7, %al
movzbl %al, %eax
movzbl %ch, %esi
cmpl %eax, %esi
setne %al
After:
movb %dil, %al
imulb %sil
seto %al
Also, remove a made-redundant testcase for PR19858, and enable more FastISel
ALU-overflow tests for SelectionDAG too.
Differential Revision: http://reviews.llvm.org/D5809
llvm-svn: 220516
This patch removes a chunk of special case logic for folding
(float)sqrt((double)x) -> sqrtf(x)
in InstCombineCasts and handles it in the mainstream path of SimplifyLibCalls.
No functional change intended, but I loosened the restriction on the existing
sqrt testcases to allow for this optimization even without unsafe-fp-math because
that's the existing behavior.
I also added a missing test case for not shrinking the llvm.sqrt.f64 intrinsic
in case the result is used as a double.
Differential Revision: http://reviews.llvm.org/D5919
llvm-svn: 220514
This fixes a bug (introduced by fixing the IR emitted from Clang where
the definition of a static member would be scoped within the class,
rather than within its lexical decl context) where the definition of a
static variable would be placed inside a class.
It also improves source fidelity by scoping static class member
definitions inside the lexical decl context in which tehy are written
(eg: namespace n { class foo { static int i; } int foo::i; } - the
definition of 'i' will be within the namespace 'n' in the DWARF output
now).
Lastly, and the original goal, this reduces debug info size slightly
(and makes debug info easier to read, etc) by placing the definitions of
non-member global variables within their namespace, rather than using a
separate namespace-scoped declaration along with a definition at global
scope.
Based on patches and discussion with Frédéric.
llvm-svn: 220497
This reverts commit r214981.
I'm not sure what I was thinking when I wrote this. Testing with MSVC
shows that this function is mangled to '@f@8':
int __fastcall f(int a, int b);
llvm-svn: 220492
This updates check for double precision zero floating point constant to allow
use of instruction with immediate value rather than temporary register.
Currently "a == 0.0", where "a" is of "double" type generates:
vmov.i32 d16, #0x0
vcmpe.f64 d0, d16
With this change it becomes:
vcmpe.f64 d0, #0
Patch by Sergey Dmitrouk.
llvm-svn: 220486
Currently, the ARM disassembler will disassemble the Thumb2 memory hint
instructions (PLD, PLDW and PLI), even for targets which do not have
these instructions. This patch adds the required checks to the
disassmebler.
llvm-svn: 220472
This invariant is enforced in Value::replaceAllUsesWith, thus it seems
logical to apply it also to ValueHandles. This commit fixes InstCombine
to not trigger the assertion during the removal of constant bitcasts in
call instructions.
Differential Revision: http://reviews.llvm.org/D5828
llvm-svn: 220468
In post-commit review of r219442, Rafael pointed out that the comment style
of the newly introduced helper didn't follow LLVM's coding standard.
Modernize the whole file to the new standards.
Differential Revision: http://reviews.llvm.org/D5918
llvm-svn: 220467
Variable handling will be sunk into DwarfFile so that abstract variables
and the like can be shared across multiple CUs (to handle cross-CU
inlining, for example).
llvm-svn: 220453
Use the DwarfDebug in one function that previously took it as a
parameter, and lay the foundation for use this for other operations
coming soon.
llvm-svn: 220452
Now that we're sure the only root (non-abstract) scope is the current
function scope, there's no need for isCurrentFunctionScope, the property
can be tested directly instead.
llvm-svn: 220451
MCJIT::getPointerForFunction adds the resulting address to the global mapping.
This should be done via updateGlobalMapping rather than addGlobalMapping, since
the latter asserts if a mapping already exists.
MCJIT::getPointerToFunction is actually deprecated - hopefully we can remove it
(or more likely re-task it) entirely soon. In the mean time it should at least
work as advertised.
<rdar://problem/18727946>
llvm-svn: 220444
Summary:
Currently when emitting a label, a new data fragment is created for it if the
current fragment isn't a data fragment.
This change instead enqueues the label and attaches it to the next fragment
(e.g. created for the next instruction) if possible.
When bundle alignment is not enabled, this has no functionality change (it
just results in fewer extra fragments being created). For bundle alignment,
previously labels would point to the beginning of the bundle padding instead
of the beginning of the emitted instruction. This was not only less efficient
(e.g. jumping to the nops instead of past them) but also led to miscalculation
of the address of the GOT (since MC uses a label difference rather than
emitting a "." symbol).
Fixes https://code.google.com/p/nativeclient/issues/detail?id=3982
Test Plan: regression test attached
Reviewers: jvoung, eliben
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D5915
llvm-svn: 220439
This has been implement using the MCTargetStreamer interface as is done in the
ARM, Mips and PPC backends.
Phabricator: http://reviews.llvm.org/D5891
PR20964
llvm-svn: 220422
A previous patch enabled SELECT_VSRC and SELECT_CC_VSRC for VSX to
handle <2 x double> cases. This patch adds SELECT_VSFRC and
SELECT_CC_VSFRC to allow use of all 64 vector-scalar registers for the
f64 type when VSX is enabled. The changes are analogous to those in
the previous patch. I've added a new variant to vsx.ll to test the
code generation.
(I also cleaned up a little formatting in PPCInstrVSX.td from the
previous patch.)
llvm-svn: 220395
When we hoist two loads above an if, we can preserve the nonnull metadata. We could also do the same for sinking them, but we appear to not handle metadata at all in that case.
Thanks to Hal for the review.
Differential Revision: http://reviews.llvm.org/D5910
llvm-svn: 220392
When a call to a double-precision libm function has fast-math semantics
(via function attribute for now because there is no IR-level FMF on calls),
we can avoid fpext/fptrunc operations and use the float version of the call
if the input and output are both float.
We already do this optimization using a command-line option; this patch just
adds the ability for fast-math to use the existing functionality.
I moved the cl::opt from InstructionCombining into SimplifyLibCalls because
it's only ever used internally to that class.
Modified the existing test cases to use the unsafe-fp-math attribute rather
than repeating all tests.
This patch should solve: http://llvm.org/bugs/show_bug.cgi?id=17850
Differential Revision: http://reviews.llvm.org/D5893
llvm-svn: 220390
When the profile for a function cannot be applied, we use to emit an
error. This seems extreme. The compiler can continue, it's just that the
optimization opportunities won't include profile information.
llvm-svn: 220386
The tests test/CodeGen/Generic/select-cc.ll and
test/CodeGen/PowerPC/select-cc.ll both fail with VSX enabled. The
problem is that the lowering logic for the SELECT and SELECT_CC
operations doesn't currently support the VSX registers. This patch
fixes that.
In lib/Target/PowerPC/PPCInstrInfo.td, we have pseudos to handle this
for other register classes. Similar pseudos are added in
PPCInstrVSX.td (they must be there, because the "vsrc" register class
definition appears there) for the VSRC register class. The
SELECT_VSRC pseudo is then used in pattern matching for SELECT_CC.
The rest of the patch just adds logic for SELECT_VSRC wherever similar
logic appears for SELECT_VRRC.
There are no new test cases because the existing tests above test
this, along with a variant in test/CodeGen/PowerPC/vsx.ll.
After discussion with Hal, a future patch will add similar _VSFRC
variants to override f64 type handling (currently using F8RC).
llvm-svn: 220385
Summary:
When using a profile, we used to require the use -gmlt so that we could
get access to the line locations. This is used to match line numbers in
the input profile to the line numbers in the function's IR.
But this is actually not necessary. The driver can provide source
location tracking without the emission of debug information. In these
cases, the annotation 'llvm.dbg.cu' is missing from the IR, but the
actual line location annotations are still present.
This patch adds a new way of looking for the start of the current
function. Instead of looking through the compile units in llvm.dbg.cu,
we can walk up the scope for the first instruction in the function with
a debug loc. If that describes the function, we use it. Otherwise, we
keep looking until we find one.
If no such instruction is found, we then give up and produce an error.
Reviewers: echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5887
llvm-svn: 220382
ConstantFolding crashes when trying to InstSimplify the following load:
@a = private unnamed_addr constant %mst {
i8* inttoptr (i64 -1 to i8*),
i8* inttoptr (i64 -1 to i8*)
}, align 8
%x = load <2 x i8*>* bitcast (%mst* @a to <2 x i8*>*), align 8
This patch fix this by adding support to this type of folding:
%x = load <2 x i8*>* bitcast (%mst* @a to <2 x i8*>*), align 8
==> gets folded to:
%x = <2 x i8*> <i8* inttoptr (i64 -1 to i8*), i8* inttoptr (i64 -1 to i8*)>
llvm-svn: 220380
ParamTLS (shadow for function arguments) is of limited size. This change
makes all arguments that do not fit unpoisoned, and avoids writing
past the end of a TLS buffer.
llvm-svn: 220351
On AArch64, GOT references are page relative (ADRP + LDR), so they can't be
applied until we know exactly where, within a page, the GOT entry will be in
the target address space.
Fixes <rdar://problem/18693976>.
llvm-svn: 220347
Summary: Patches 202051 and 208013 added calls to LTO's PassManager which unconditionally add LoopVectorizePass and SLPVectorizerPass instead of following the logic in PassManagerBuilder::populateModulePassManager and honoring the -vectorize-loops -run-slp-after-loop-vectorization flags.
Reviewers: nadav, aschwaighofer, yijiang
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5884
llvm-svn: 220345
These are named following the IEEE-754 names for these
functions, rather than the libm fmin / fmax to avoid
possible ambiguities. Some languages may implement something
resembling fmin / fmax which return NaN if either operand is
to propagate errors. These implement the IEEE-754 semantics
of returning the other operand if either is a NaN representing
missing data.
llvm-svn: 220341
Enumerate `MDNode`'s operands *before* the node itself, so that the
reader requires less RAUW. Although this will cause different code
paths to be hit in the reader, this should effectively be no
functionality change.
llvm-svn: 220340
combineMetadata is used when merging two instructions into one. This change teaches it how to merge 'nonnull' - i.e. only preserve it on the new instruction if it's set on both sources. This isn't actually used yet since I haven't adjusted any of the call sites to pass in nonnull as a 'known metadata'.
llvm-svn: 220325
When changing the type of a load in Chandler's recent InstCombine changes, we can preserve the new 'nonnull' metadata.
I considered adding an assert since 'nonnull' is only valid on pointer types, but casting a pointer to a non-pointer would involve more than a bitcast anyways. If someone extends this transform to handle more than bitcasts, the verifier will report the malformed IR, so a separate assertion isn't needed. Also, the fpmath flags would have the same problem.
llvm-svn: 220324
This enables targets to adapt their pass pipeline to the register
allocator in use. For example, with the AArch64 backend, using PBQP
with the cortex-a57, the FPLoadBalancing pass is no longer necessary.
llvm-svn: 220321
This function was complicated by the fact that it tried to perform
canonicalizations that were already preformed by InstSimplify. Remove
this extra code and move the tests over to InstSimplify. Add asserts to
make sure our preconditions hold before we make any assumptions.
llvm-svn: 220314
With VSX enabled, test/CodeGen/PowerPC/recipest.ll exposes a bug in
the FMA mutation pass. If we have a situation where a killed product
register is the same register as the FMA target, such as:
%vreg5<def,tied1> = XSNMSUBADP %vreg5<tied0>, %vreg11, %vreg5,
%RM<imp-use>; VSFRC:%vreg5 F8RC:%vreg11
then the substitution makes no sense. We end up getting a crash when
we try to extend the interval associated with the killed product
register, as there is already a live range for %vreg5 there. This
patch just disables the mutation under those circumstances.
Since recipest.ll generates different code with VMX enabled, I've
modified that test to use -mattr=-vsx. I've borrowed the code from
that test that exposed the bug and placed it in fma-mutate.ll, where
it tests several mutation opportunities including the "bad" one.
llvm-svn: 220290
The 32-bit variants of the NEON scalar<->GPR move instructions are
also available in VFPv2. The 8- and 16-bit variants do require NEON.
Note that the checks in the test file are all -DAG because they are
checking a mixture of stdout and stderr, and the ordering is not
guaranteed.
llvm-svn: 220288
Summary: Fixed memory accesses with rbp as a base or an index register.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5819
llvm-svn: 220283
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
llvm-svn: 220277
Every target we support has support for assembly that looks like
a = b - c
.long a
What is special about MachO is that the above combination suppresses the
production of a relocation.
With this change we avoid producing the intermediary labels when they don't
add any value.
llvm-svn: 220256
When functions are inlined, instructions without debug information are
attributed to the call site's DebugLoc. After inlining, inlined static
allocas are moved to the caller's entry block, adjacent to the caller's
original static alloca instructions. By retaining the call site's
DebugLoc, these instructions could cause instructions that were
subsequently inserted at the entry block to pick up the same DebugLoc.
Patch by Wolfgang Pieb!
llvm-svn: 220255
Our metadata scheme lazily assigns IDs to string metadata, but we have a mechanism to preassign them as well. Using a preassigned ID is helpful since we get compile time type checking, and avoid some (minimal) string construction and comparison. This change adds enum value for three existing metadata types:
+ MD_nontemporal = 9, // "nontemporal"
+ MD_mem_parallel_loop_access = 10, // "llvm.mem.parallel_loop_access"
+ MD_nonnull = 11 // "nonnull"
I went through an updated various uses as well. I made no attempt to get all uses; I focused on the ones which were easily grepable and easily to translate. For example, there were several items in LoopInfo.cpp I chose not to update.
llvm-svn: 220248
Range metadata applies to loads, call, and invokes. We were validating that metadata applied to loads was correct according to the LangRef, but we were not validating metadata applied to calls or invokes. This change extracts the checking functionality to a common location, reuses it for all valid locations, and adds a simple test to ensure a misused range on a call gets reported.
llvm-svn: 220246
X86 code to lower VSELECT messed a bit with the bits set in the mask of VSELECT
when it knows it can be lowered into BLEND. Indeed, only the high bits need to be
set for those and it optimizes those accordingly.
However, when the mask is a compile time constant, the lowering will be handled
by the generic optimizer and those modifications will generate bad code in the
generic optimizer.
This patch fixes that by preventing the optimization if the VSELECT will be
handled by the generic optimizer.
<rdar://problem/18675020>
llvm-svn: 220242
The newly introduced 'nonnull' metadata is analogous to existing 'nonnull' attributes, but applies to load instructions rather than call arguments or returns. Long term, it would be nice to combine these into a single construct. The value of the load is allowed to vary between successive loads, but null is not a valid value to be loaded by any load marked nonnull.
Reviewed by: Hal Finkel
Differential Revision: http://reviews.llvm.org/D5220
llvm-svn: 220240
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
Updated version of r219584 (reverted in r219595) - the commutation attempt now explicitly ensures that neither of the commuted source operands are tied to the destination operand / register, which was the source of all the regressions that occurred with the original patch attempt.
Added additional regression test case provided by Joerg Sonnenberger.
Differential Revision: http://reviews.llvm.org/D5818
llvm-svn: 220239
The previous code had a few problems, motivating the choices here.
1. It could create instructions clobbering CPSR, but the incoming MachineInstr
didn't reflect this. A potential source of corruption. This is why the patch
has a new PseudoInst for before lowering.
2. Similarly, there was some code to handle the incoming instruction not being
ARMCC::AL, but this would have caused massive problems if it was actually
invoked when a complex offset needing more than one instruction was requested.
3. It wasn't designed to handle unaligned pointers (or offsets). These should
probably be minimised anyway, but the code needs to deal with them properly
regardless.
4. It had some rather dubious ad-hoc code to avoid calling
emitThumbRegPlusImmediate, a function which should be designed to do precisely
this job.
We seem to cover the common cases correctly now, and hopefully can enhance
emitThumbRegPlusImmediate to handle any extra optimisations we need to add in
future.
llvm-svn: 220236
VarArg Intrinsic functions are encoded with "void" type as the last
argument. Now Intrinsic::getType can correctly return all the intrinsic
function type.
llvm-svn: 220205
The current instruction selection patterns for SMULW[BT] and SMLAW[BT]
are incorrect. These instructions multiply a 32-bit and a 16-bit value
(both signed) and return the top 32 bits of the 48-bit result. This
preserves the 16 bits of overflow, whereas the patterns they currently
match truncate the result to 16 bits then sign extend.
To select these instructions, we would need to match an ISD::SMUL_LOHI,
a sign extend, two shifts and an or. There is no way to match SMUL_LOHI
in an instruction pattern as it defines multiple values, so this would
have to be done in C++. I have raised
http://llvm.org/bugs/show_bug.cgi?id=21297 to cover allowing correct
selection of these instructions.
This fixes http://llvm.org/bugs/show_bug.cgi?id=19396
llvm-svn: 220196
This function can, for some offsets from the SP, split one instruction
into two. Since it re-uses the original instruction as the first
instruction of the result, we need ensure its result register is not
marked as dead before we use it in the second instruction.
llvm-svn: 220194
be BigEndian so the default can continue to be zero-initialized.
This is one of the prerequisites to making DataLayout a constant and
always available part of every module.
llvm-svn: 220193
The original code had an implicit assumption that if the test for
allocas or globals was reached, the two pointers were not equal. With my
changes to make the pointer analysis more powerful here, I also had to
guard against circumstances where the results weren't useful. That in
turn violated the assumption and gave rise to a circumstance in which we
could have a store with both the queried pointer and stored pointer
rooted at *the same* alloca. Clearly, we cannot ignore such a store.
There are other things we might do in this code to better handle the
case of both pointers ending up at the same alloca or global, but it
seems best to at least make the test explicit in what it intends to
check.
I've added tests for both the alloca and global case here.
llvm-svn: 220190
r220178. First, the creation routine doesn't insert prior to the
terminator of the basic block provided, but really at the end of the
basic block. Instead, get the terminator and insert before that. The
next issue was that we need to ensure multiple PHI node entries for
a single predecessor re-use the same cast instruction rather than
creating new ones.
All of the logic here was without tests previously. I've reduced and
added a test case from the test suite that crashed without both of these
fixes.
llvm-svn: 220186
logic to look through pointer casts, making them trivially stronger in
the face of loads and stores with intervening pointer casts.
I've included a few test cases that demonstrate the kind of folding
instcombine can do without pointer casts and then variations which
obfuscate the logic through bitcasts. Without this patch, the variations
all fail to optimize fully.
This is more important now than it has been in the past as I've started
moving the load canonicialization to more closely follow the value type
requirements rather than the pointer type requirements and thus this
needs to be prepared for more pointer casts. When I made the same change
to stores several test cases regressed without logic along these lines
so I wanted to systematically improve matters first.
llvm-svn: 220178
loads.
This handles many more cases than just the AA metadata, some of them
suggested by Hal in his review of the AA metadata handling patch. I've
tried to test this behavior where tractable to do so.
I'll point out that I have specifically *not* included a test for
debuginfo because it was going to require 2 or 3 times as much work to
craft some input which would survive the "helpful" stripping of debug
info metadata that doesn't match the desired schema. This is another
good example of why the current state of write-ability for our debug
info metadata is unacceptable. I spent over 30 minutes trying to conjure
some test case that would survive, even copying from other debug info
tests, but it always failed to survive with no explanation of why or how
I might fix it. =[
llvm-svn: 220165
up to where it actually works as intended. The problem is that
a GlobalAlias isa GlobalValue and so the prior block handled all of the
cases.
This allows us to constant fold based on the actual constant expression
in the global alias. As an example, see the last function in the newly
added test case which explicitly aligns an unaligned pointer using
constant expression math. Without this change, we fail to see that and
fold an alignment test to zero.
llvm-svn: 220164
The following implements the transformation:
(sub (or A B) (xor A B)) --> (and A B).
Patch by Ankur Garg!
Differential Revision: http://reviews.llvm.org/D5719
llvm-svn: 220163
The following implements the optimization for sequences of the form:
icmp eq/ne (shl Const2, A), Const1
Such sequences can be transformed to:
icmp eq/ne A, (TrailingZeros(Const1) - TrailingZeros(Const2))
This handles only the equality operators for now. Other operators need
to be handled.
Patch by Ankur Garg!
llvm-svn: 220162
by my refactoring of this code.
The method isSafeToLoadUnconditionally assumes that the load will
proceed with the preferred type alignment. Given that, it has to ensure
that the alloca or global is at least that aligned. It has always done
this historically when a datalayout is present, but has never checked it
when the datalayout is absent. When I refactored the code in r220156,
I exposed this path when datalayout was present and that turned the
latent bug into a patent bug.
This fixes the issue by just removing the special case which allows
folding things without datalayout. This isn't worth the complexity of
trying to tease apart when it is or isn't safe without actually knowing
the preferred alignment.
llvm-svn: 220161
make much more sense and in theory be more correct.
If you trace the code alllll the way back to when it was first
introduced, the comments make it slightly more clear what was going on
here. At that time, the only way Base != V was if DL (then TD) was
non-null. As a consequence, if DL *was* null, that meant we were loading
directly from the alloca or global found above the test. After
refactoring, this has become at least terribly subtle and potentially
incorrect. There are many forms of pointer manipulation that can be
traversed without DataLayout, and some of them would in fact change the
size of object being loaded vs. allocated.
Rather than this subtlety, I've hoisted the actual 'return true' bits
into the code which actually found an alloca or global and based them on
the loaded pointer being that alloca or global. This is both more clear
and safer. I've also added comments about exactly why this set of
predicates is used.
I've also corrected a misleading comment about globals -- if overridden
they may not just have a different size, they may be null and completely
unsafe to load from!
Hopefully this confuses the next reader a bit less. I don't have any
test cases or anything, the patch is motivated strictly to improve the
readability of the code.
llvm-svn: 220156
...)) and (load (cast ...)): canonicalize toward the former.
Historically, we've tried to load using the type of the *pointer*, and
tried to match that type as closely as possible removing as many pointer
casts as we could and trading them for bitcasts of the loaded value.
This is deeply and fundamentally wrong.
Repeat after me: memory does not have a type! This was a hard lesson for
me to learn working on SROA.
There is only one thing that should actually drive the type used for
a pointer, and that is the type which we need to use to load from that
pointer. Matching up pointer types to the loaded value types is very
useful because it minimizes the physical size of the IR required for
no-op casts. Similarly, the only thing that should drive the type used
for a loaded value is *how that value is used*! Again, this minimizes
casts. And in fact, the *only* thing motivating types in any part of
LLVM's IR are the types used by the operations in the IR. We should
match them as closely as possible.
I've ended up removing some tests here as they were testing bugs or
behavior that is no longer present. Mostly though, this is just cleanup
to let the tests continue to function as intended.
The only fallout I've found so far from this change was SROA and I have
fixed it to not be impeded by the different type of load. If you find
more places where this change causes optimizations not to fire, those
too are likely bugs where we are assuming that the type of pointers is
"significant" for optimization purposes.
llvm-svn: 220138
cases where the alloca type, the load types, and the store types used
all disagree.
Previously, the only way that vector-based promotion occured was if the
alloca type was a vector type. This was one of the *very* few remaining
uses of the alloca's type to guide SROA/mem2reg left in LLVM. It turns
out it was a bad idea.
The alloca type can change very easily based on the mixture of types
loaded and stored to that alloca. We shouldn't be relying on it as
a signal for very much. Instead, the source of truth should be loads and
stores. We should canonicalize the loads and stores as much as possible
and then rely on them exclusively in SROA.
When looking and loads and stores, we may find many different candidate
vector types. This change will let SROA try all of them to find a vector
type which is a viable way to promote the entire alloca to a vector
register.
With this change, it becomes possible to do better canonicalization and
optimization of loads and stores without breaking SROA in random ways,
and that should allow fixing a core source of performance loss in hot
numerical loops such as those in Eigen.
llvm-svn: 220116
TL;DR: Indexing maps with [] creates missing entries.
The long version:
When selecting lifetime intrinsics, we index the *static* alloca map with the AllocaInst we find for that lifetime. Trouble is, we don't first check to see if this is a dynamic alloca.
On the attached example, this causes a dynamic alloca to create an entry in the static map, and returns 0 (the default) as the frame index for that lifetime. 0 was used for the frame index of the stack protector, which given that it now has a lifetime, is coloured, and merged with other stack slots.
PEI would later trigger an assert because it expects the stack protector to not be dead.
This fix ensures that we only get frame indices for static allocas, ie, those in the map. Dynamic ones are effectively dropped, which is suboptimal, but at least isn't completely broken.
rdar://problem/18672951
llvm-svn: 220099
This reverts commit r219899.
This also updates byval-tail-call.ll to make it clear what was breaking.
Adding r219899 again will cause the load/store to disappear.
llvm-svn: 220093
With VSX enabled, LLVM crashes when compiling
test/CodeGen/PowerPC/fma.ll. I traced this to the liveness test
that's revised in this patch. The interval test is designed to only
work for virtual registers, but in this case the AddendSrcReg is
physical. Since there is already a walk of the MIs between the
AddendMI and the FMA, I added a check for def/kill of the AddendSrcReg
in that loop. At Hal Finkel's request, I converted the liveness test
to an assert restricted to virtual registers.
I've changed the fma.ll test to have VSX and non-VSX variants so we
can test both kinds of multiply-adds.
llvm-svn: 220090
The generic code trying to use findCommutedOpIndices won't
understand that it needs to swap the modifier operands also,
so it should fail if they are set.
llvm-svn: 220064
When the input to a store instruction was a zero vector, the backend
always selected a normal vector store regardless of the non-temporal
hint. This is fixed by this patch.
This fixes PR19370.
llvm-svn: 220054
We should be talking about the number of source elements, not the number of destination elements, given we know at this point that the source and dest element numbers are not the same.
While we're at it, avoid writing to std::vector::end()...
Bug found with random testing and a lot of coffee.
llvm-svn: 220051
Currently the VSX support enables use of lxvd2x and stxvd2x for 2x64
types, but does not yet use lxvw4x and stxvw4x for 4x32 types. This
patch adds that support.
As with lxvd2x/stxvd2x, this involves straightforward overriding of
the patterns normally recognized for lvx/stvx, with preference given
to the VSX patterns when VSX is enabled.
In addition, the logic for permitting misaligned memory accesses is
modified so that v4r32 and v4i32 are treated the same as v2f64 and
v2i64 when VSX is enabled. Finally, the DAG generation for unaligned
loads is changed to just use a normal LOAD (which will become lxvw4x)
on P8 and later hardware, where unaligned loads are preferred over
lvsl/lvx/lvx/vperm.
A number of tests now generate the VSX loads/stores instead of
lvx/stvx, so this patch adds VSX variants to those tests. I've also
added <4 x float> tests to the vsx.ll test case, and created a
vsx-p8.ll test case to be used for testing code generation for the
P8Vector feature. For now, that simply tests the unaligned load/store
behavior.
This has been tested along with a temporary patch to enable the VSX
and P8Vector features, with no new regressions encountered with or
without the temporary patch applied.
llvm-svn: 220047
v2: use dyn_cast
fixup comments
v3: use cast
Reviewed-by: Matt Arsenault <arsenm2@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 220044
DSE's overlap checking contained special logic, used only when no DataLayout
was available, which inferred a complete overwrite when the pointee types were
equal. This logic seems fine for regular loads/stores, but does not work for
memcpy and friends. Instead of fixing this, I'm just removing it.
Philosophically, transformations should not contain enhanced behavior used only
when data layout is lacking (data layout should be strictly additive), and
maintaining these rarely-tested code paths seems not worthwhile at this stage.
Credit to Aliaksei Zasenka for the bug report and the diagnosis. The test case
(slightly reduced from that provided by Aliaksei) replaces the original
contents of test/Transforms/DeadStoreElimination/no-targetdata.ll -- a few
other tests have been updated to have a data layout.
llvm-svn: 220035
The only difference from r219829 is using
getOrCreateSectionSymbol(*ELFSec)
instead of
GetOrCreateSymbol(ELFSec->getSectionName())
in ELFObjectWriter which causes us to use the correct section symbol even if
we have multiple sections with the same name.
Original messages:
r219829:
Correctly handle references to section symbols.
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
r219835:
Allow forward references to section symbols.
llvm-svn: 220021
The bug is in ARMConstantIslands::createNewWater where the upper bound of the
new water split point is computed:
// This could point off the end of the block if we've already got constant
// pool entries following this block; only the last one is in the water list.
// Back past any possible branches (allow for a conditional and a maximally
// long unconditional).
if (BaseInsertOffset + 8 >= UserBBI.postOffset()) {
BaseInsertOffset = UserBBI.postOffset() - UPad - 8;
DEBUG(dbgs() << format("Move inside block: %#x\n", BaseInsertOffset));
}
The split point is supposed to be somewhere between the machine instruction that
loads from the constant pool entry and the end of the basic block, before branch
instructions. The code above is fine if the basic block is large enough and
there are a sufficient number of instructions following the machine instruction.
However, if the machine instruction is near the end of the basic block,
BaseInsertOffset can point to the machine instruction or another instruction
that precedes it, and this can lead to convergence failure.
This commit fixes this bug by ensuring BaseInsertOffset is larger than the
offset of the instruction following the constant-loading instruction.
rdar://problem/18581150
llvm-svn: 220015
Revert "Correctly handle references to section symbols."
Revert "Allow forward references to section symbols."
Rui found a regression I am debugging.
llvm-svn: 220010
This is in preparation for another patch that makes patchpoints invokable.
Reviewers: atrick, ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5657
llvm-svn: 219967
'AS'.
Using 'S' as this was a terrible idea. Arguably, 'AS' is not much
better, but it at least follows the idea of using initialisms and
removes active confusion about the AllocaSlices variable and a Slice
variable.
llvm-svn: 219963
clang-modernize.
I did have to clean up the variable types and whitespace a bit because
the use of auto made the code much less readable here.
llvm-svn: 219962
Summary:
Backends can use setInsertFencesForAtomic to signal to the middle-end that
montonic is the only memory ordering they can accept for
stores/loads/rmws/cmpxchg. The code lowering those accesses with a stronger
ordering to fences + monotonic accesses is currently living in
SelectionDAGBuilder.cpp. In this patch I propose moving this logic out of it
for several reasons:
- There is lots of redundancy to avoid: extremely similar logic already
exists in AtomicExpand.
- The current code in SelectionDAGBuilder does not use any target-hooks, it
does the same transformation for every backend that requires it
- As a result it is plain *unsound*, as it was apparently designed for ARM.
It happens to mostly work for the other targets because they are extremely
conservative, but Power for example had to switch to AtomicExpand to be
able to use lwsync safely (see r218331).
- Because it produces IR-level fences, it cannot be made sound ! This is noted
in the C++11 standard (section 29.3, page 1140):
```
Fences cannot, in general, be used to restore sequential consistency for atomic
operations with weaker ordering semantics.
```
It can also be seen by the following example (called IRIW in the litterature):
```
atomic<int> x = y = 0;
int r1, r2, r3, r4;
Thread 0:
x.store(1);
Thread 1:
y.store(1);
Thread 2:
r1 = x.load();
r2 = y.load();
Thread 3:
r3 = y.load();
r4 = x.load();
```
r1 = r3 = 1 and r2 = r4 = 0 is impossible as long as the accesses are all seq_cst.
But if they are lowered to monotonic accesses, no amount of fences can prevent it..
This patch does three things (I could cut it into parts, but then some of them
would not be tested/testable, please tell me if you would prefer that):
- it provides a default implementation for emitLeadingFence/emitTrailingFence in
terms of IR-level fences, that mimic the original logic of SelectionDAGBuilder.
As we saw above, this is unsound, but the best that can be done without knowing
the targets well (and there is a comment warning about this risk).
- it then switches Mips/Sparc/XCore to use AtomicExpand, relying on this default
implementation (that exactly replicates the logic of SelectionDAGBuilder, so no
functional change)
- it finally erase this logic from SelectionDAGBuilder as it is dead-code.
Ideally, each target would define its own override for emitLeading/TrailingFence
using target-specific fences, but I do not know the Sparc/Mips/XCore memory model
well enough to do this, and they appear to be dealing fine with the ARM-inspired
default expansion for now (probably because they are overly conservative, as
Power was). If anyone wants to compile fences more agressively on these
platforms, the long comment should make it clear why he should first override
emitLeading/TrailingFence.
Test Plan: make check-all, no functional change
Reviewers: jfb, t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5474
llvm-svn: 219957
iterators.
There are a ton of places where it essentially wants ranges
rather than just iterators. This is just the first step that adds the
core slice range typedefs and uses them in a couple of places. I still
have to explicitly construct them because they've not been punched
throughout the entire set of code. More range-based cleanups incoming.
llvm-svn: 219955
Summary:
Currently, call slot optimization requires that if the destination is an
argument, the argument has the sret attribute. This is to ensure that
the memory access won't trap. In addition to sret, we can also allow the
optimization to happen for arguments that have the new dereferenceable
attribute, which gives the same guarantee.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5832
llvm-svn: 219950
If a square root call has an FP multiplication argument that can be reassociated,
then we can hoist a repeated factor out of the square root call and into a fabs().
In the simplest case, this:
y = sqrt(x * x);
becomes this:
y = fabs(x);
This patch relies on an earlier optimization in instcombine or reassociate to put the
multiplication tree into a canonical form, so we don't have to search over
every permutation of the multiplication tree.
Because there are no IR-level FastMathFlags for intrinsics (PR21290), we have to
use function-level attributes to do this optimization. This needs to be fixed
for both the intrinsics and in the backend.
Differential Revision: http://reviews.llvm.org/D5787
llvm-svn: 219944
When the constant divisor was larger than 32bits, then the optimized code
generated for the AArch64 backend would emit the wrong code, because the shift
was defined as a shift of a 32bit constant '(1<<Lg2(divisor))' and we would
loose the upper 32bits.
This fixes rdar://problem/18678801.
llvm-svn: 219934
Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
llvm-svn: 219931
Make tail recursion elimination a bit more aggressive. This allows us to get
tail recursion on functions that are just branches to a different function. The
fact that the function takes a byval argument does not restrict it from being
optimised into just a tail call.
llvm-svn: 219899
Philip Reames and I had a long conversation about this, mostly because it is
not obvious why the current logic is correct. Hopefully, these comments will
prevent such confusion in the future.
llvm-svn: 219882
For pointer-typed function arguments, enhanced alignment can be asserted using
the 'align' attribute. When inlining, if this enhanced alignment information is
not otherwise available, preserve it using @llvm.assume-based alignment
assumptions.
llvm-svn: 219876
Clang CodeGen had a utility function for creating pointer alignment assumptions
using the @llvm.assume intrinsic. This functionality will also be needed by the
inliner (to preserve function-argument alignment attributes when inlining), so
this moves the utility function into IRBuilder where it can be used both by
Clang CodeGen and also other LLVM-level code.
llvm-svn: 219875
In AVX512f we support 64x2 and 32x8 inserts via matching them to 32x4 and 64x4
respectively. These are matched by "Alt" Pat<>'s (Alt stands for alternative
VTs).
Since DQ has native support for these intructions, I peeled off the non-"Alt"
part of the baseclass into vinsert_for_size_no_alt. The DQ instructions are
derived from this multiclass. The "Alt" Pat<>'s are disabled with DQ.
Fixes <rdar://problem/18426089>
llvm-svn: 219874
The new attributes are NumElts and the CD8TupleForm. This prepares the code
to enable x8 and x2 inserts.
NFC, no change in X86.td.expanded except for the new attributes.
llvm-svn: 219871
It's the W bit that selects between 32 or 64 elt type and not the opcode. The
opcode selects between the width of the insert (128 or 256).
llvm-svn: 219870
This CL introduces MachOObjectFile::getUuid(). This function returns an ArrayRef to the object file's UUID, or an empty ArrayRef if the object file doesn't contain an LC_UUID load command.
The new function is gonna be used by llvm-symbolizer.
llvm-svn: 219866
The SelectDS1Addr1Offset complex pattern always tries to store constant
lds pointers in the offset operand and store a zero value in the addr operand.
Since the addr operand does not accept immediates, the zero value
needs to first be copied to a register.
This newly created zero value will not go through normal instruction
selection, so we need to manually insert a V_MOV_B32_e32 in the complex
pattern.
This bug was hidden by the fact that if there was another zero value
in the DAG that had not been selected yet, then the CSE done by the DAG
would use the unselected node for the addr operand rather than the one
that was just created. This would lead to the zero value being selected
and the DAG automatically inserting a V_MOV_B32_e32 instruction.
llvm-svn: 219848
This original fix for the build break was correct. LLVM_ATTRIBUTE_USED
removes the warning message because it keeps the function in the object
file. LLVM_ATTRIBUTE_UNUSED indicates that it may or may not be used
depending on build settings.
llvm-svn: 219846
Store `User::NumOperands` (and `MDNode::NumOperands`) in `Value`.
On 64-bit host architectures, this reduces `sizeof(User)` and all
subclasses by 8, and has no effect on `sizeof(Value)` (or, incidentally,
on `sizeof(MDNode)`).
On 32-bit host architectures, this increases `sizeof(Value)` by 4.
However, it has no effect on `sizeof(User)` and `sizeof(MDNode)`, so the
only concrete subclasses of `Value` that actually see the increase are
`BasicBlock`, `Argument`, `InlineAsm`, and `MDString`. Moreover, I'll
be shocked and confused if this causes a tangible memory regression.
This has no functionality change (other than memory footprint).
llvm-svn: 219845
A follow-up commit will modify the memory-layout of `Value`, `User`, and
`MDNode`. First fix the comments to be doxygen-friendly (and to follow
the coding standards).
- Use "\brief" instead of "repeatedName -".
- Add a brief intro where it was missing.
- Remove duplicated comments from source files (and a couple of
noisy/trivial comments altogether).
llvm-svn: 219844
If x is known to have the range [a, b) in a loop predicated by (icmp
ne x, a), its range can be sharpened to [a + 1, b). Get
ScalarEvolution and hence IndVars to exploit this fact.
This change triggers an optimization to widen-loop-comp.ll, so it had
to be edited to get it to pass.
phabricator: http://reviews.llvm.org/D5639
llvm-svn: 219834
Truncate the operands of a switch instruction to a narrower type if the upper
bits are known to be all ones or zeros.
rdar://problem/17720004
llvm-svn: 219832
This is mostly a copy of the existing FastISel GEP code, but we have to
duplicate it for AArch64, because otherwise we would bail out even for simple
cases. This is because the standard fastEmit functions don't cover MUL at all
and ADD is lowered very inefficientily.
The original commit had a bug in the add emit logic, which has been fixed.
llvm-svn: 219831
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
llvm-svn: 219829
This adds the MCInstPrinter to the LLVMHexagonDesc library and removes
the dependency LLVMHexagonAsmPrinter had on LLVMHexagonDesc. This is
a prerequisite needed by the disassembler.
Phabricator Revision: http://reviews.llvm.org/D5734
llvm-svn: 219826
1. Use const with autos.
2. Don't bother with explicit const in cast ops because they do it automagically.
Thanks, David B. / Aaron B. / Reid K.
llvm-svn: 219817
The SLP vectorizer should not vectorize ephemeral values. These are used to
express information to the optimizer, and vectorizing them does not lead to
faster code (because the ephemeral values are dropped prior to code generation,
vectorized or not), and obscures the information the instructions are
attempting to communicate (the logic that interprets the arguments to
@llvm.assume generically does not understand vectorized conditions).
Also, uses by ephemeral values are free (because they, and the necessary
extractelement instructions, will be dropped prior to code generation).
llvm-svn: 219816
We need to make sure that we visit all operands of an instruction before moving
deeper in the operand graph. We had been pushing operands onto the back of the work
set, and popping them off the back as well, meaning that we might visit an
instruction before visiting all of its uses that sit in between it and the call
to @llvm.assume.
To provide an explicit example, given the following:
%q0 = extractelement <4 x float> %rd, i32 0
%q1 = extractelement <4 x float> %rd, i32 1
%q2 = extractelement <4 x float> %rd, i32 2
%q3 = extractelement <4 x float> %rd, i32 3
%q4 = fadd float %q0, %q1
%q5 = fadd float %q2, %q3
%q6 = fadd float %q4, %q5
%qi = fcmp olt float %q6, %q5
call void @llvm.assume(i1 %qi)
%q5 is used by both %qi and %q6. When we visit %qi, it will be marked as
ephemeral, and we'll queue %q6 and %q5. %q6 will be marked as ephemeral and
we'll queue %q4 and %q5. Under the old system, we'd then visit %q4, which
would become ephemeral, %q1 and then %q0, which would become ephemeral as
well, and now we have a problem. We'd visit %rd, but it would not be marked as
ephemeral because we've not yet visited %q2 and %q3 (because we've not yet
visited %q5).
This will be covered by a test case in a follow-up commit that enables
ephemeral-value awareness in the SLP vectorizer.
llvm-svn: 219815
Summary:
Currently an error is thrown if bundle alignment mode is set more than once
per module (either via the API or the .bundle_align_mode directive). This
change allows setting it multiple times as long as the alignment doesn't
change.
Also nested bundle_lock groups are currently not allowed. This change allows
them, with the effect that the group stays open until all nests are exited,
and if any of the bundle_lock directives has the align_to_end flag, the
group becomes align_to_end.
These changes make the bundle aligment simpler to use in the compiler, and
also better match the corresponding support in GNU as.
Reviewers: jvoung, eliben
Differential Revision: http://reviews.llvm.org/D5801
llvm-svn: 219811
Follow-up to r219801. Post-commit review pointed out that all comments
require a `\brief` description [1], so I converted many and recrafted a
few to be briefer or to include a brief intro. (If I'm going to clean
them up, I should do it right!)
[1]: http://llvm.org/docs/CodingStandards.html#doxygen-use-in-documentation-comments
llvm-svn: 219808
A number of comment cleanups:
- Remove duplicated function and class names from comments.
- Remove duplicated comments from source file (some of which were
out-of-sync).
- Move any unduplicated comments from source file to header.
- Remove some noisy comments entirely (e.g., a comment for
`DIDescriptor::print()` saying "print descriptor" just gets in the
way of reading the code).
llvm-svn: 219801
Summary:
Fixes a FIXME in MachineSinking. Instead of using the simple heuristics in
isPostDominatedBy, use the real MachinePostDominatorTree and MachineLoopInfo.
The old heuristics caused instructions to sink unnecessarily, and might create
register pressure.
This is the second try of the fix. The first one (D4814) caused a performance
regression due to failing to sink instructions out of loops (PR21115). This
patch fixes PR21115 by sinking an instruction from a deeper loop to a shallower
one regardless of whether the target block post-dominates the source.
Thanks Alexey Volkov for reporting PR21115!
Test Plan:
Added a NVPTX codegen test to verify that our change prevents the backend from
over-sinking. It also shows the unnecessary register pressure caused by
over-sinking.
Added an X86 test to verify we can sink instructions out of loops regardless of
the dominance relationship. This test is reduced from Alexey's test in PR21115.
Updated an affected test in X86.
Also ran SPEC CINT2006 and llvm-test-suite for compilation time and runtime
performance. Results are attached separately in the review thread.
Reviewers: Jiangning, resistor, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, bruno, volkalexey, llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D5633
llvm-svn: 219773
Early attempts to support AAPCS bare metal MachO targets based the decision on
the CPU being compiled for. This was not a particularly great idea and we've
got a better option now, but this check remained.
No functional change for any target we care about.
llvm-svn: 219767
This is a follow up to commit r219742. It removes the CCInMI variable
and accesses the CC in CSCINC directly. In the case of a conditional
branch accessing the CC with CCInMI was wrong.
llvm-svn: 219748
Peephole optimization that generates a single conditional branch
for csinc-branch sequences like in the examples below. This is
possible when the csinc sets or clears a register based on a condition
code and the branch checks that register. Also the condition
code may not be modified between the csinc and the original branch.
Examples:
1. Convert csinc w9, wzr, wzr, <CC>;tbnz w9, #0, 0x44
to b.<invCC>
2. Convert csinc w9, wzr, wzr, <CC>; tbz w9, #0, 0x44
to b.<CC>
rdar://problem/18506500
llvm-svn: 219742
A few minor changes to prevent @llvm.assume from interfering with loop
vectorization. First, treat @llvm.assume like the lifetime intrinsics, which
are scalarized (but don't otherwise interfere with the legality checking).
Second, ignore the cost of ephemeral instructions in the loop (these will go
away anyway during CodeGen).
Alignment assumptions and other uses of @llvm.assume can often end up inside of
loops that should be vectorized (this is not uncommon for assumptions generated
by __attribute__((align_value(n))), for example).
llvm-svn: 219741
Patch to provide shuffle decodes and asm comments for the sse pslldq/psrldq SSE2/AVX2 byte shift instructions.
Differential Revision: http://reviews.llvm.org/D5598
llvm-svn: 219738
Thumb1 has legitimate reasons for preferring 32-bit alignment of types
i1/i8/i16, since the 16-bit encoding of "add rD, sp, #imm" requires #imm to be
a multiple of 4. However, this is a trade-off betweem code size and RAM usage;
the DataLayout string is not the best place to represent it even if desired.
So this patch removes the extra Thumb requirements, hopefully making ARM and
Thumb completely compatible in this respect.
llvm-svn: 219734
There's no hard requirement on LLVM to align local variable to 32-bits, so the
Thumb1 frame handling needs to be able to deal with variables that are only
naturally aligned without falling over.
llvm-svn: 219733
This is mostly a copy of the existing FastISel GEP code, but on AArch64 we bail
out even for simple cases, because the standard fastEmit functions don't cover
MUL and ADD is lowered inefficientily.
llvm-svn: 219726
Before, ARM and Thumb mode code had different preferred alignments, which could
lead to some rather unexpected results. There's justification for reducing it
from the default 64-bits (wasted space), but I don't think there is for going
below 32-bits.
There's no actual ABI change here, just to reassure people.
llvm-svn: 219719
The CFL-AA implementation was missing a visit* routine for va_arg instructions,
causing it to assert when run on a function that had one. For now, handle these
in a conservative way.
Fixes PR20954.
llvm-svn: 219718
Eliminate library calls and intrinsic calls to fabs when the input
is a squared value.
Note that no unsafe-math / fast-math assumptions are needed for
this optimization.
Differential Revision: http://reviews.llvm.org/D5777
llvm-svn: 219717
Sign-/zero-extend folding depended on the load and the integer extend to be
both selected by FastISel. This cannot always be garantueed and SelectionDAG
might interfer. This commit adds additonal checks to load and integer extend
lowering to catch this.
Related to rdar://problem/18495928.
llvm-svn: 219716
We assumed that A must be greater than B because the right hand side of
a remainder operator must be nonzero.
However, it is possible for A to be less than B if Pow2 is a power of
two greater than 1.
Take for example:
i32 %A = 0
i32 %B = 31
i32 Pow2 = 2147483648
((Pow2 << 0) >>u 31) is non-zero but A is less than B.
This fixes PR21274.
llvm-svn: 219713
This effectively reverts revert 219707. After fixing the test to work with
new function name format and renamed intrinsic.
Reviewed-by: Tom Stellard <tom@stellard.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 219710
Reapply r216913, a fix for PR20832 by Andrea Di Biagio. The commit was reverted
because of buildbot failures, and credit goes to Ulrich Weigand for isolating
the underlying issue (which can be confirmed by Valgrind, which does helpfully
light up like the fourth of July). Uli explained the problem with the original
patch as:
It seems the problem is calling multiplySignificand with an addend of category
fcZero; that is not expected by this routine. Note that for fcZero, the
significand parts are simply uninitialized, but the code in (or rather, called
from) multiplySignificand will unconditionally access them -- in effect using
uninitialized contents.
This version avoids using a category == fcZero addend within
multiplySignificand, which avoids this problem (the Valgrind output is also now
clean).
Original commit message:
[APFloat] Fixed a bug in method 'fusedMultiplyAdd'.
When folding a fused multiply-add builtin call, make sure that we propagate the
correct result in the case where the addend is zero, and the two other operands
are finite non-zero.
Example:
define double @test() {
%1 = call double @llvm.fma.f64(double 7.0, double 8.0, double 0.0)
ret double %1
}
Before this patch, the instruction simplifier wrongly folded the builtin call
in function @test to constant 'double 7.0'.
With this patch, method 'fusedMultiplyAdd' correctly evaluates the multiply and
propagates the expected result (i.e. 56.0).
Added test fold-builtin-fma.ll with the reproducible from PR20832 plus extra
test cases to verify the behavior of method 'fusedMultiplyAdd' in the presence
of NaN/Inf operands.
This fixes PR20832.
llvm-svn: 219708
v2: Add SI lowering
Add test
v3: Place work dimensions after the kernel arguments.
v4: Calculate offset while lowering arguments
v5: rebase
v6: change prefix to AMDGPU
Reviewed-by: Tom Stellard <tom@stellard.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 219705
Summary:
In order to facilitate use of common code, checking by reviewers of other fast-isel ports, and hopefully to eventually move most of Mips and other fast-isel ports into target independent code, I've tried to get the two implementations to line up.
There is no functional code change. Just methods moved in the file to be in the same order as in AArch64.
Test Plan: No functional change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5692
llvm-svn: 219703
Let me tell you a tale...
Originally committed in r211723 after discovering a nasty case of weird
scoping due to inlining, this was reverted in r211724 after it fired in
ASan/compiler-rt.
(minor diversion where I accidentally committed/reverted again in
r211871/r211873)
After further testing and fixing bugs in ArgumentPromotion (r211872) and
Inlining (r212065) it was recommitted in r212085. Reverted in r212089
after the sanitizer buildbots still showed problems.
Fixed another bug in ArgumentPromotion (r212128) found by this
assertion.
Recommitted in r212205, reverted in r212226 after it crashed some more
on sanitizer buildbots.
Fix clang some more in r212761.
Recommitted in r212776, reverted in r212793. ASan failures.
Recommitted in r213391, reverted in r213432, trying to reproduce flakey
ASan build failure.
Fixed bugs in r213805 (ArgPromo + DebugInfo), r213952
(LiveDebugVariables strips dbg_value intrinsics in functions not
described by debug info).
Recommitted in r214761, reverted in r214999, flakey failure on Windows
buildbot.
Fixed DeadArgElimination + DebugInfo bug in r219210.
Recommitted in r219215, reverted in r219512, failure on ObjC++ atomic
properties in the test-suite on Darwin.
Fixed ObjC++ atomic properties issue in Clang in r219690.
[This commit is provided 'as is' with no hope that this is the last time
I commit this change either expressed or implied]
llvm-svn: 219702
When LazyValueInfo uses @llvm.assume intrinsics to provide edge-value
constraints, we should check for intrinsics that dominate the edge's branch,
not just any potential context instructions. An assumption that dominates the
edge's branch represents a truth on that edge. This is specifically useful, for
example, if multiple predecessors assume a pointer to be nonnull, allowing us
to simplify a later null comparison.
The test case, and an initial patch, were provided by Philip Reames. Thanks!
llvm-svn: 219688
and TargetRegisterInfo in the peephole optimizer. This
makes it easier to grab subtarget dependent variables off
of the MachineFunction rather than the TargetMachine.
llvm-svn: 219669
e.g Currently we'll generate following instructions if the immediate is too wide:
MOV X0, WideImmediate
ADD X1, BaseReg, X0
LDR X2, [X1, 0]
Using [Base+XReg] addressing mode can save one ADD as following:
MOV X0, WideImmediate
LDR X2, [BaseReg, X0]
Differential Revision: http://reviews.llvm.org/D5477
llvm-svn: 219665
This is the same optimization of r219233 with modifications to support PHIs with multiple incoming edges from the same block
and a test to check that this condition is handled.
llvm-svn: 219656
the IR going into it and to clean up the IR produced by the vectorizers.
Note that these are *off by default* right now while folks collect data
on whether the performance tradeoff is reasonable.
In a build of the 'opt' binary, I see about 2% compile time regression
due to this change on average. This is in my mind essentially the worst
expected case: very little of the opt binary is going to *benefit* from
these extra passes.
I've seen several benchmarks improve in performance my small amounts due
to running these passes, and there are certain (rare) cases where these
passes make a huge difference by either enabling the vectorizer at all
or by hoisting runtime checks out of the outer loop. My primary
motivation is to prevent people from seeing runtime check overhead in
benchmarks where the existing passes and optimizers would be able to
eliminate that.
I've chosen the sequence of passes based on the kinds of things that
seem likely to be relevant for the code at each stage: rotaing loops for
the vectorizer, finding correlated values, loop invariants, and
unswitching opportunities from any runtime checks, and cleaning up
commonalities exposed by the SLP vectorizer.
I'll be pinging existing threads where some of these issues have come up
and will start new threads to get folks to benchmark and collect data on
whether this is the right tradeoff or we should do something else.
llvm-svn: 219644
We assumed that negation operations of the form (0 - %Z) resulted in a
negative number. This isn't true if %Z was originally negative.
Substituting the negative number into the remainder operation may result
in undefined behavior because the dividend might be INT_MIN.
This fixes PR21256.
llvm-svn: 219639
This patch adds a new llvm_call_once function which is used by the ManagedStatic implementation to safely initialize a global to avoid static construction and destruction.
llvm-svn: 219638
We have a transform that changes:
(x lshr C1) udiv C2
into:
x udiv (C2 << C1)
However, it is unsafe to do so if C2 << C1 discards any of C2's bits.
This fixes PR21255.
llvm-svn: 219634
Summary:
Make Mips fast-isel track the form of AArch64 where practical.
This makes it easier for people to review the code, to borrow similar code, and to see how to eventually move a lot of this
target code for fast-isels into target independent code.
These are just cosmetic changes. Should be no functional difference.
Test Plan:
make check
test-suite for 4 flavors mips32 r1/r2 , -O0/-O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: aemerson, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5595
llvm-svn: 219633
Broken parent scope pointers in inlined DIVariables can cause
ensureAbstractVariableIsCreated to insert new abstract scopes, thus
invalidating the iterator in this loop and leading to hard-to-debug
crashes. Useful when manually reducing IR for testcases.
llvm-svn: 219628
Some early revisions of the Cortex-A53 have an erratum (835769) whereby it is
possible for a 64-bit multiply-accumulate instruction in AArch64 state to
generate an incorrect result. The details are quite complex and hard to
determine statically, since branches in the code may exist in some
circumstances, but all cases end with a memory (load, store, or prefetch)
instruction followed immediately by the multiply-accumulate operation.
The safest work-around for this issue is to make the compiler avoid emitting
multiply-accumulate instructions immediately after memory instructions and the
simplest way to do this is to insert a NOP.
This patch implements such work-around in the backend, enabled via the option
-aarch64-fix-cortex-a53-835769.
The work-around code generation is not enabled by default.
llvm-svn: 219603
Summary: [asan-asm-instrumentation] Fixed memory references which includes %rsp as a base or an index register.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5599
llvm-svn: 219602
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
This mainly helps the stack inliner better fold reloads of 3 (or more) operand instructions (VEX encoded SSE etc.) but by performing this in the lowest foldMemoryOperandImpl implementation it also replaces the X86InstrInfo::optimizeLoadInstr version and is now used by FastISel too.
Differential Revision: http://reviews.llvm.org/D5701
llvm-svn: 219584
A helper routine, MultiplyOverflows, was a less efficient
reimplementation of APInt's smul_ov and umul_ov. While we are here,
clean up the code so it's more uniform.
No functionality change intended.
llvm-svn: 219583
On x86_64 this brings it from 80 bytes to 64 bytes. Also make any member
variables private and clean up uses to go through the existing accessors.
NFC.
llvm-svn: 219573
Consider the case where X is 2. (2 <<s 31)/s-2147483648 is zero but we
would fold to X. Note that this is valid when we are in the unsigned
domain because we require NUW: 2 <<u 31 results in poison.
This fixes PR21245.
llvm-svn: 219568
consider:
C1 = INT_MIN
C2 = -1
C1 * C2 overflows without a doubt but consider the following:
%x = i32 INT_MIN
This means that (%X /s C1) is 1 and (%X /s C1) /s C2 is -1.
N. B. Move the unsigned version of this transform to InstSimplify, it
doesn't create any new instructions.
This fixes PR21243.
llvm-svn: 219567
consider:
mul i32 nsw %x, -2147483648
this instruction will not result in poison if %x is 1
however, if we transform this into:
shl i32 nsw %x, 31
then we will be generating poison because we just shifted into the sign
bit.
This fixes PR21242.
llvm-svn: 219566
getSmallConstantTripCount even when it isn't the exiting block.
I missed this in my first audit, very sorry. This was found in LNT and
elsewhere. I don't have a test case, but it was completely obvious from
inspection that this was the problem. I'll see if I can reduce a test
case, but I'm not really hopeful, and the value seems quite low.
llvm-svn: 219562
Summary: Implement the most basic form of conditional branches in Mips fast-isel.
Test Plan:
br1.ll
run 4 flavors of test-suite. mips32 r1/r2 and at -O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5583
llvm-svn: 219556
routines and fix all of the bugs they expose.
I hit a test case that crashed even without these asserts due to passing
a non-exiting latch to the ExitingBlock parameter of the trip count
computation machinery. However, when I add the nice asserts, it turns
out we have plenty of coverage of these bugs, they just didn't manifest
in crashers.
The core problem seems to stem from an assumption that the latch *is*
the exiting block. While this is often true, and somewhat the "normal"
way to think about loops, it isn't necessarily true. The correct way to
call the trip count routines in a *generic* fashion (that is, without
a particular exit in mind) is to just use the loop's single exiting
block if it has one. The trip count can't be computed generically unless
it does. This works great for the loop vectorizer. The loop unroller
actually *wants* to select the latch when it has to chose between
multiple exits because for unrolling it is the latch trips that matter.
But if this is the desire, it needs to explicitly guard for non-exiting
latches and check for the generic trip count in that case.
I've added the asserts, and added convenience APIs for querying the trip
count generically that check for a single exit block. I've kept the APIs
consistent between computing trip count and trip multiples.
Thansk to Mark for the help debugging and tracking down the *right* fix
here!
llvm-svn: 219550
The LLVM Lang Ref states for signed/unsigned int to float conversions:
"If the value cannot fit in the floating point value, the results are undefined."
And for FP to signed/unsigned int:
"If the value cannot fit in ty2, the results are undefined."
This matches the C definitions.
The existing behavior pins to infinity or a max int value, but that may just
lead to more confusion as seen in:
http://llvm.org/bugs/show_bug.cgi?id=21130
Returning undef will hopefully lead to a less silent failure.
Differential Revision: http://reviews.llvm.org/D5603
llvm-svn: 219542
1) Explicitly provide important arguments to llvm-symbolizer,
not relying on defaults.
2) Be more defensive about symbolizer output.
This might fix weird failures on ninja-x64-msvc-RA-centos6 buildbot.
llvm-svn: 219541
In fact, symbolization is now expected to work only on Linux and
FreeBSD/NetBSD, where we have dl_iterate_phdr and can learn the
main executable name without argv0 (it will be possible on BSD systems
after http://reviews.llvm.org/D5693 lands). #ifdef-out the code for
all the rest Unix systems.
Reviewed in http://reviews.llvm.org/D5610
llvm-svn: 219534
Currently this only functions to match simple cases
where ds_read2_* / ds_write2_* instructions can be used.
In the future it might match some of the other weird
load patterns, such as direct to LDS loads.
Currently enabled only with a subtarget feature to enable
easier testing.
llvm-svn: 219533
It also makes it more aggressive in querying range information by
adding a call to isKnownPredicateWithRanges to
isLoopBackedgeGuardedByCond and isLoopEntryGuardedByCond.
phabricator: http://reviews.llvm.org/D5638
Reviewed by: atrick, hfinkel
llvm-svn: 219532
is over a subset of condition codes.
This fixes the -Werror build which warns about use of uninitialized
variables in the default case.
llvm-svn: 219531
This invariant is violated (& the assertions fire) on some Objective C++
in the test-suite. Reverting while I investigate.
This reverts commit r219215.
llvm-svn: 219523
ScalarEvolution in the presence of multiple exits. Previously all
loops exits had to have identical counts for a loop trip count to be
considered computable. This pessimization was implemented by calling
getBackedgeTakenCount(L) rather than getExitCount(L, ExitingBlock)
inside of ScalarEvolution::getSmallConstantTripCount() (see the FIXME
in the comments of that function). The pessimization was added to fix
a corner case involving undefined behavior (pr/16130). This patch more
precisely handles the undefined behavior case allowing the pessimization
to be removed.
ControlsExit replaces IsSubExpr to more precisely track the case where
undefined behavior is expected to occur. Because undefined behavior is
tracked more precisely we can remove MustExit from ExitLimit. MustExit
was used to track the case where the limit was computed potentially
assuming undefined behavior even if undefined behavior didn't necessarily
occur.
llvm-svn: 219517
Fixes a logic error in the MachineScheduler found by Steve Montgomery (and
confirmed by Andy). This has gone unfixed for months because the fix has been
found to introduce some small performance regressions. However, Andy has
recommended that, at this point, we fix this to avoid further dependence on the
incorrect behavior (and then follow-up separately on any regressions), and I
agree.
Fixes PR18883.
llvm-svn: 219512
Summary: Add the ability to convert 64 or 32 bit floating point values to integer in mips fast-isel
Test Plan:
fpintconv.ll
ran 4 flavors of test-suite with no errors, misp32 r1/r2 O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler, mcrosier
Differential Revision: http://reviews.llvm.org/D5562
llvm-svn: 219511
This change depends on the ApplePropertyString helper that I sent spearately.
Not sure how you want this tested: as a tool test by adding a binary to dump, or as an llvm test starting from an IR file?
Reviewers: dblaikie, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5689
llvm-svn: 219507
DW_AT_specification and DW_AT_abstract_origin resolving was only performed
on subroutine DIEs because it used the getSubroutineName method. Introduce
a more generic getName() and use it to dump the reference attributes.
Testcases have been updated to check the printed names instead of the offsets
except when the name could be ambiguous.
Reviewers: dblaikie, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5625
llvm-svn: 219506
The current VSX feature for PowerPC specifies availability of the VSX
instructions added with the 2.06 architecture version. With 2.07, the
architecture adds new instructions to both the Category:Vector and
Category:VSX instruction sets. Additionally, unaligned vector storage
operations have improved performance.
This patch adds a feature to provide access to the new instructions
and performance capabilities of Power8. For compatibility with GCC,
the feature is controlled via a new -mpower8-vector switch, and the
feature causes the __POWER8_VECTOR__ builtin define to be generated by
the preprocessor.
There is a companion patch for cfe being committed at the same time.
llvm-svn: 219501
This is dangerous for numerous reasons. The primary risk here is with
floating point or double types where if the wrong header files are
included in a strange order this can implicitly convert to integers and
then call the C abs function on the integers. There is a secondary risk
that even impacts integers where if the namespace the code is written in
ever defines an abs overload for types within that namespace the global
abs will be hidden. The correct form is to call std::abs or write 'using
std::abs' for builtin types (and only the latter is correct in any
generic context).
I've also added the requisite header to be a bit more explicit here.
llvm-svn: 219484
instead
We used to transform this:
define void @test6(i1 %cond, i8* %ptr) {
entry:
br i1 %cond, label %bb1, label %bb2
bb1:
br label %bb2
bb2:
%ptr.2 = phi i8* [ %ptr, %entry ], [ null, %bb1 ]
store i8 2, i8* %ptr.2, align 8
ret void
}
into this:
define void @test6(i1 %cond, i8* %ptr) {
%ptr.2 = select i1 %cond, i8* null, i8* %ptr
store i8 2, i8* %ptr.2, align 8
ret void
}
because the simplifycfg transformation into selects would happen to happen
before the simplifycfg transformation that removes unreachable control flow
(We have 'unreachable control flow' due to the store to null which is undefined
behavior).
The existing transformation that removes unreachable control flow in simplifycfg
is:
/// If BB has an incoming value that will always trigger undefined behavior
/// (eg. null pointer dereference), remove the branch leading here.
static bool removeUndefIntroducingPredecessor(BasicBlock *BB)
Now we generate:
define void @test6(i1 %cond, i8* %ptr) {
store i8 2, i8* %ptr.2, align 8
ret void
}
I did not see any impact on the test-suite + externals.
rdar://18596215
llvm-svn: 219462
This patch changes the fast-math implementation for calculating sqrt(x) from:
y = 1 / (1 / sqrt(x))
to:
y = x * (1 / sqrt(x))
This has 2 benefits: less code / faster code and one less estimate instruction
that may lose precision.
The only target that will be affected (until http://reviews.llvm.org/D5658 is approved)
is PPC. The difference in codegen for PPC is 2 less flops for a single-precision sqrtf
or vector sqrtf and 4 less flops for a double-precision sqrt.
We also eliminate a constant load and extra register usage.
Differential Revision: http://reviews.llvm.org/D5682
llvm-svn: 219445
The current implementation of GPR->FPR register moves uses a stack slot. This mechanism writes a double word and reads a word. In big-endian the load address must be displaced by 4-bytes in order to get the right value. In little endian this is no longer required. This patch fixes the issue and adds LE regression tests to fast-isel-conversion which currently expose this problem.
llvm-svn: 219441
This patch removes the PBQPBuilder class and its subclasses and replaces them
with a composable constraints class: PBQPRAConstraint. This allows constraints
that are only required for optimisation (e.g. coalescing, soft pairing) to be
mixed and matched.
This patch also introduces support for target writers to supply custom
constraints for their targets by overriding a TargetSubtargetInfo method:
std::unique_ptr<PBQPRAConstraints> getCustomPBQPConstraints() const;
This patch should have no effect on allocations.
llvm-svn: 219421
LLVM assumes INSERT_SUBREG will always have register operands, so
we need to legalize non-register operands, like FrameIndexes, to
avoid random assertion failures.
llvm-svn: 219420
The VSX instruction definitions for lxsdx, lxvd2x, lxvdsx, and lxvw4x
incorrectly use the XForm_1 instruction format, rather than the
XX1Form instruction format. This is likely a pasto when creating
these instructions, which were based on lvx and so forth. This patch
uses the correct format.
The existing reformatting test (test/MC/PowerPC/vsx.s) missed this
because the two formats differ only in that XX1Form has an extension
to the target register field in bit 31. The tests for these
instructions used a target register of 7, so the default of 0 in bit
31 for XForm_1 didn't expose a problem. For register numbers 32-63
this would be noticeable. I've changed the test to use higher
register numbers to verify my change is effective.
llvm-svn: 219416
This introduces access to the AbstractSPDies map from DwarfDebug so
DwarfCompileUnit can access it. Eventually this'll sink down to
DwarfFile, but it'll still be generically accessible - not much
encapsulation to provide it. (constructInlinedScopeDIE could stay
further up, in DwarfFile to avoid exposing this - but I don't think
that's particularly better)
llvm-svn: 219411
This patch fixes a bug in method InstCombiner::FoldCmpCstShrCst where we
wrongly computed the distance between the highest bits set of two negative
values.
This fixes PR21222.
Differential Revision: http://reviews.llvm.org/D5700
llvm-svn: 219406
While getSectionContents was updated to do the right thing,
getSectionSize wasn't. Move the logic to getSectionSize and leverage it
from getSectionContents.
llvm-svn: 219391
It is not useful to return the data beyond VirtualSize it's less than
SizeOfRawData.
An implementation detail of COFF requires the section size to be rounded
up to a multiple of FileAlignment; this means that SizeOfRawData is not
representative of how large the section is. Instead, we should cap it
to VirtualSize when this occurs as it represents the true size of the
section.
Note that this is only relevant in executable files because this
rounding doesn't occur in object files (and VirtualSize is always zero).
llvm-svn: 219388
(& add a few accessors/make a couple of things public for this - it's a
bit of a toss-up, but I think I prefer it this way, keeping some more of
the meaty code down in DwarfCompileUnit - if only to make for smaller
implementation files, etc)
I think we could simplify range handling a bit if we removed the range
lists from each unit and just put a single range list on DwarfDebug,
similar to address pooling.
llvm-svn: 219370
No functional change.
This is the current AVX512_maskable multiclass hierarchy:
maskable_custom
/ \
/ \
maskable_common maskable_in_asm
/ \
/ \
maskable maskable_3src
llvm-svn: 219363
This adds the Pat<>'s for the intrinsics. These are necessary because we
don't lower these intrinsics to SDNodes but match them directly. See the
rational in the previous commit.
llvm-svn: 219362
These derive from the new asm-only masking definitions.
Unfortunately I wasn't able to find a ISel pattern that we could legally
generate for the masking variants. The problem is that since the destination
is v4* we would need VK4 register classes and v4i1 value types to express the
masking. These are however not legal types/classes in AVX512f but only in VL,
so things get complicated pretty quickly. We can revisit this question later
if we have a more pressing need to express something like this.
So the ISel patterns are empty for the masking instructions and the next patch
will add Pat<>s instead to match the intrinsics calls with instructions.
llvm-svn: 219361
No functional change.
No change in X86.td.expanded except for the appearance of the new attributes.
The new attributes will be used in the subsequent patch.
llvm-svn: 219360
This change modifies fatal signal handler used in LLVM tools.
Now it attempts to find llvm-symbolizer binary and communicates
with it in order to turn instruction addresses into
function/file/line info entries. This should significantly improve
stack traces readability in Debug builds.
This feature only works on selected platforms (including Darwin
and Linux). If the symbolization fails for some reason, signal
handler will fallback to the original behavior.
Reviewed in http://reviews.llvm.org/D5610
llvm-svn: 219354
One of many steps to generalize subprogram emission to both the DWO and
non-DWO sections (to emit -gmlt-like data under fission). Once the
functions are pushed down into DwarfCompileUnit some of the data
structures will be pushed at least into DwarfFile so that they can be
unique per-file, allowing emission to both files independently.
llvm-svn: 219345
Summary:
I had forgotten to check for NotSlowIncDec in the patterns that can generate
inc/dec for the above pattern (added in D4796).
This currently applies to Atom Silvermont, KNL and SKX.
Test Plan: New checks on atomic_mi.ll
Reviewers: jfb, nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5677
llvm-svn: 219336
A function with discardable linkage cannot be discarded if its a member
of a COMDAT group without considering all the other COMDAT members as
well. This sort of thing is already handled by GlobalOpt/GlobalDCE.
This fixes PR21206.
llvm-svn: 219335
There are two methods in SectionRef that can fail:
* getName: The index into the string table can be invalid.
* getContents: The section might point to invalid contents.
Every other method will always succeed and returning and std::error_code just
complicates the code. For example, a section can have an invalid alignment,
but if we are able to get to the section structure at all and create a
SectionRef, we will always be able to read that invalid alignment.
llvm-svn: 219314
This must be enforced for all v6M cores, not just the cortex-m0,
irregardless of the user-specified alignment.
Patch by Charlie Turner.
llvm-svn: 219300
We won't link in pthreads if we weren't built with LLVM_ENABLE_THREADS
which means we won't get access to pthread_sigmask. Use sigprocmask
instead.
llvm-svn: 219288
David Majnemer