Summary:
Not all system assembler supports `.uleb128 label2 - label1` form.
When the target do not support this form, we have to take
alternative manual calculation to get the offsets from them.
Reviewed By: hubert.reinterpretcast
Diffierential Revision: https://reviews.llvm.org/D92058
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
In https://reviews.llvm.org/D89072 I added static const data members
to the debug subsection for globals. It skipped emitting an S_CONSTANT if it
didn't have a value, which meant the subsection could be empty.
This patch fixes the empty subsection issue.
Differential Revision: https://reviews.llvm.org/D92049
This reapplies 36c64af9d7 in updated
form.
Emit the xdata for each function at .seh_endproc. This keeps the
exact same output header order for most code generated by the LLVM
CodeGen layer. (Sections still change order for code built from
assembly where functions lack an explicit .seh_handlerdata
directive, and functions with chained unwind info.)
The practical effect should be that assembly output lacks
superfluous ".seh_handlerdata; .text" pairs at the end of functions
that don't handle exceptions, which allows such functions to use
the AArch64 packed unwind format again.
Differential Revision: https://reviews.llvm.org/D87448
This patch moves the selection of the style used to emit the numbers
(DW_OP_implicit_value vs. DW_OP_const+DW_OP_stack_value) into
DwarfExpression::addUnsignedConstant. This logic is not FP-specific, and
it will be needed for large integers too.
The refactor also makes DW_OP_implicit_value (DW_OP_stack_value worked
already) be used for floating point constants other than float and
double, so I've added a _Float16 test for it.
Split off from D90916.
Differential Revision: https://reviews.llvm.org/D91058
All these potential null pointer dereferences are reported by my static analyzer for null smart pointer dereferences, which has a different implementation from `alpha.cplusplus.SmartPtr`.
The checked pointers in this patch are initialized by Target::createXXX functions. When the creator function pointer is not correctly set, a null pointer will be returned, or the creator function may originally return a null pointer.
Some of them may not make sense as they may be checked before entering the function, but I fixed them all in this patch. I submit this fix because 1) similar checks are found in some other places in the LLVM codebase for the same return value of the function; and, 2) some of the pointers are dereferenced before they are checked, which may definitely trigger a null pointer dereference if the return value is nullptr.
Reviewed By: tejohnson, MaskRay, jpienaar
Differential Revision: https://reviews.llvm.org/D91410
The `dso_local_equivalent` constant is a wrapper for functions that represents a
value which is functionally equivalent to the global passed to this. That is, if
this accepts a function, calling this constant should have the same effects as
calling the function directly. This could be a direct reference to the function,
the `@plt` modifier on X86/AArch64, a thunk, or anything that's equivalent to the
resolved function as a call target.
When lowered, the returned address must have a constant offset at link time from
some other symbol defined within the same binary. The address of this value is
also insignificant. The name is leveraged from `dso_local` where use of a function
or variable is resolved to a symbol in the same linkage unit.
In this patch:
- Addition of `dso_local_equivalent` and handling it
- Update Constant::needsRelocation() to strip constant inbound GEPs and take
advantage of `dso_local_equivalent` for relative references
This is useful for the [Relative VTables C++ ABI](https://reviews.llvm.org/D72959)
which makes vtables readonly. This works by replacing the dynamic relocations for
function pointers in them with static relocations that represent the offset between
the vtable and virtual functions. If a function is externally defined,
`dso_local_equivalent` can be used as a generic wrapper for the function to still
allow for this static offset calculation to be done.
See [RFC](http://lists.llvm.org/pipermail/llvm-dev/2020-August/144469.html) for more details.
Differential Revision: https://reviews.llvm.org/D77248
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This patch uses the new `getMnemonic` helper from D90039
to display mnemonics instead of the internal opcodes.
The main motivation behind using the mnemonics is that they
are more user-friendly and more directly related to the assembly
the users will be presented.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D90040
The test fails on Mac, see comment on the code review.
> This option was in a rather convoluted place, causing global parameters
> to be set in awkward and undesirable ways to try to account for it
> indirectly. Add tests for the -disable-debug-info option and ensure we
> don't print unintended markers from unintended places.
>
> Reviewed By: dstenb
>
> Differential Revision: https://reviews.llvm.org/D91083
This reverts commit 9606ef03f0.
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
This option was in a rather convoluted place, causing global parameters
to be set in awkward and undesirable ways to try to account for it
indirectly. Add tests for the -disable-debug-info option and ensure we
don't print unintended markers from unintended places.
Reviewed By: dstenb
Differential Revision: https://reviews.llvm.org/D91083
This broke both Firefox and Chromium (PR47905) due to what seems like dllimport
function not being handled correctly.
> This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
> Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
>
> Reviewed By: rnk
>
> Differential Revision: https://reviews.llvm.org/D87544
This reverts commit cfd8481da1.
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
This lets external consumers customize the output, similar to how
AssemblyAnnotationWriter lets the caller define callbacks when printing
IR. The array of handlers already existed, this just cleans up the code
so that it can be exposed publically.
Replaces https://reviews.llvm.org/D74158
Differential Revision: https://reviews.llvm.org/D89613
This caused an explosion in ICF times during linking on Windows when libfuzzer
instrumentation is enabled. For a small binary we see ICF time go from ~0 to
~10 s. For a large binary it goes from ~1 s to forevert (I gave up after 30
minutes).
See comment on the code review.
> If we are going to write handler data (that is written as variable
> length data following after the unwind info in .xdata), we need to
> emit the handler data immediately, but for cases where no such
> info is going to be written, skip emitting it right away. (Unwind
> info for all remaining functions that hasn't gotten it emitted
> directly is emitted at the end.)
>
> This does slightly change the ordering of sections (triggering a
> bunch of updates to DebugInfo/COFF tests), but the change should be
> benign.
>
> This also matches GCC's assembly output, which doesn't output
> .seh_handlerdata unless it actually is needed.
>
> For ARM64, the unwind info can be packed into the runtime function
> entry itself (leaving no data in the .xdata section at all), but
> that can only be done if there's no follow-on data in the .xdata
> section. If emission of the unwind info is triggered via
> EmitWinEHHandlerData (or the .seh_handlerdata directive), which
> implicitly switches to the .xdata section, there's a chance of the
> caller wanting to pass further data there, so the packed format
> can't be used in that case.
>
> Differential Revision: https://reviews.llvm.org/D87448
This reverts commit 36c64af9d7.
MC currently produces monolithic .gcc_except_table section. GCC can split up .gcc_except_table:
* if comdat: `.section .gcc_except_table._Z6comdatv,"aG",@progbits,_Z6comdatv,comdat`
* otherwise, if -ffunction-sections: `.section .gcc_except_table._Z3fooi,"a",@progbits`
This ensures that (a) non-prevailing copies are discarded and (b)
.gcc_except_table associated to discarded text sections can be discarded by a
.gcc_except_table-aware linker (GNU ld, but not gold or LLD)
This patches matches the GCC behavior. If -fno-unique-section-names is
specified, we don't append the suffix. If -ffunction-sections is additionally specified,
use `.section ...,unique`.
Note, if clang driver communicates that the linker is LLD and we know it
is new (11.0.0 or later) we can use SHF_LINK_ORDER to avoid string table
costs, at least in the -fno-unique-section-names case. We cannot use it on GNU
ld because as of binutils 2.35 it does not support mixed SHF_LINK_ORDER &
non-SHF_LINK_ORDER components in an output section
https://sourceware.org/bugzilla/show_bug.cgi?id=26256
For RISC-V -mrelax, this patch additionally fixes an assembler-linker
interaction problem: because a section is shrinkable, the length of a call-site
code range is not a constant. Relocations referencing the associated text
section (STT_SECTION) are needed. However, a STB_LOCAL relocation referencing a
discarded section group member from outside the group is disallowed by the ELF
specification (PR46675):
```
// a.cc
inline int comdat() { try { throw 1; } catch (int) { return 1; } return 0; }
int main() { return comdat(); }
// b.cc
inline int comdat() { try { throw 1; } catch (int) { return 1; } return 0; }
int foo() { return comdat(); }
clang++ -target riscv64-linux -c a.cc b.cc -fPIC -mno-relax
ld.lld -shared a.o b.o => ld.lld: error: relocation refers to a symbol in a discarded section:
```
-fbasic-block-sections= is similar to RISC-V -mrelax: there are outstanding relocations.
Reviewed By: jrtc27, rahmanl
Differential Revision: https://reviews.llvm.org/D83655
This commit adds a missed out line in earlier commit for DW_TAG_generic_subrange.
Previous commit ID: a6dd01afa3
Differential Revision: https://reviews.llvm.org/D89218
Thanks markus for pointing this out.
Since Wasm comdat sections work similarly to ELF, we can use that mechanism
to eliminate duplicate dwarf type information in the same way.
Differential Revision: https://reviews.llvm.org/D88603
We used to only emit static const data members in CodeView as
S_CONSTANTS when they were used; this patch makes it so they are always emitted.
This changes CodeViewDebug.cpp to find the static const members from the
class debug info instead of creating DIGlobalVariables in the IR
whenever a static const data member is used.
Bug: https://bugs.llvm.org/show_bug.cgi?id=47580
Differential Revision: https://reviews.llvm.org/D89072
This reverts commit 504615353f.
This is needed to support fortran assumed rank arrays which
have runtime rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF TAG
DW_TAG_generic_subrange is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89218
Fix an out-of-bounds shift in emitLegacyZExt by using a slightly more
complicated dwarf expression to create the zext mask.
This addresses a UBSan diagnostic seen when compiling compiler-rt
(llvm.org/PR47927).
rdar://70307714
Differential Revision: https://reviews.llvm.org/D89838
The types of SEH aren't x86(-32) vs x64 but rather stack-based exception chaining
vs table-based exception handling. x86-32 is the only arch for which Windows
uses the former. 32-bit ARM would use what is called Win64SEH today, which
is a bit confusing so instead let's just rename it to be a bit more clear.
Reviewed By: compnerd, rnk
Differential Revision: https://reviews.llvm.org/D90117
Since Wasm comdat sections work similarly to ELF, we can use that mechanism
to eliminate duplicate dwarf type information in the same way.
Differential Revision: https://reviews.llvm.org/D88603
Sometimes in unoptimized code, we have dangling unreachable basic blocks with no predecessors. Basic block sections should be emitted for those as well. Without this patch, the included test fails with a fatal error in `AsmPrinter::emitBasicBlockEnd`.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D89423
We used to only emit static const data members in CodeView as
S_CONSTANTS when they were used; this patch makes it so they are always emitted.
I changed CodeViewDebug.cpp to find the static const members from the
class debug info instead of creating DIGlobalVariables in the IR
whenever a static const data member is used.
Bug: https://bugs.llvm.org/show_bug.cgi?id=47580
Differential Revision: https://reviews.llvm.org/D89072
This patch adds a remarks that provides counts for each opcode per basic block.
An snippet of the generated information can be seen below.
The current implementation uses the target specific opcode for the counts. For example, on AArch64 this means we currently get 2 entries for `add` instructions if the block contains 32 and 64 bit adds. Similarly, immediate version are treated differently.
Unfortunately there seems to be no convenient way to get only the mnemonic part of the instruction as a string AFAIK. This could be improved in the future.
```
--- !Analysis
Pass: asm-printer
Name: InstructionMix
DebugLoc: { File: arm64-instruction-mix-remarks.ll, Line: 30, Column: 30 }
Function: foo
Args:
- String: 'BasicBlock: '
- BasicBlock: else
- String: "\n"
- String: INST_MADDWrrr
- String: ': '
- INST_MADDWrrr: '2'
- String: "\n"
- String: INST_MOVZWi
- String: ': '
- INST_MOVZWi: '1'
```
Reviewed By: anemet, thegameg, paquette
Differential Revision: https://reviews.llvm.org/D89892
This patch enables emitting DWARF `DW_OP_implicit_value` opcode when
tuning debug information for LLDB (`-debugger-tune=lldb`).
This will also propagate to Darwin platforms, since they use LLDB tuning
as a default.
rdar://67406059
Differential Revision: https://reviews.llvm.org/D90001
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Testing reveals that lldb and gdb have some problems with supporting
DW_OP_convert - gdb with Split DWARF tries to resolve the CU-relative
DIE offset relative to the skeleton DIE. lldb tries to treat the offset
as absolute, which judging by the llvm-dsymutil support for
DW_OP_convert, I guess works OK in MachO? (though probably llvm-dsymutil
is producing invalid DWARF by resolving the relative reference to an
absolute one?).
Specifically this disables DW_OP_convert usage in DWARFv5 if:
* Tuning for GDB and using Split DWARF
* Tuning for LLDB and not targeting MachO
Create the LLVM / CodeView register mappings for the 32-bit ARM Window targets.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D89622
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
LLVM rejects DWARF operator DW_OP_over. This DWARF operator is needed
for Flang to support assumed rank array.
Summary:
Currently LLVM rejects DWARF operator DW_OP_over. Below error is
produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151, 20, 16, 48, 30, 35, 80, 34, 6)
warning: ignoring invalid debug info in over.ll
[..]
There were some parts missing in support of this operator, which are
now completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89208
This lets external consumers customize the output, similar to how
AssemblyAnnotationWriter lets the caller define callbacks when printing
IR. The array of handlers already existed, this just cleans up the code
so that it can be exposed publically.
Differential Revision: https://reviews.llvm.org/D74158
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
This patch lets the bb_addr_map (renamed to __llvm_bb_addr_map) section use a special section type (SHT_LLVM_BB_ADDR_MAP) instead of SHT_PROGBITS. This would help parsers, dumpers and other tools to use the sh_type ELF field to identify this section rather than relying on string comparison on the section name.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D88199
Currently, AsmPrinter code is organized in a way in which the labels of address-taken blocks are emitted in the previous section, which makes the relocation incorrect.
This patch reorganizes the code to switch to the basic block section before handling address-taken blocks.
Reviewed By: snehasish, MaskRay
Differential Revision: https://reviews.llvm.org/D88517
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This is part of the Propeller framework to do post link code layout optimizations. Please see the RFC here: https://groups.google.com/forum/#!msg/llvm-dev/ef3mKzAdJ7U/1shV64BYBAAJ and the detailed RFC doc here: https://github.com/google/llvm-propeller/blob/plo-dev/Propeller_RFC.pdf
This patch provides exception support for basic block sections by splitting the call-site table into call-site ranges corresponding to different basic block sections. Still all landing pads must reside in the same basic block section (which is guaranteed by the the core basic block section patch D73674 (ExceptionSection) ). Each call-site table will refer to the landing pad fragment by explicitly specifying @LPstart (which is omitted in the normal non-basic-block section case). All these call-site tables will share their action and type tables.
The C++ ABI somehow assumes that no landing pads point directly to LPStart (which works in the normal case since the function begin is never a landing pad), and uses LP.offset = 0 to specify no landing pad. In the case of basic block section where one section contains all the landing pads, the landing pad offset relative to LPStart could actually be zero. Thus, we avoid zero-offset landing pads by inserting a **nop** operation as the first non-CFI instruction in the exception section.
**Background on Exception Handling in C++ ABI**
https://github.com/itanium-cxx-abi/cxx-abi/blob/master/exceptions.pdf
Compiler emits an exception table for every function. When an exception is thrown, the stack unwinding library queries the unwind table (which includes the start and end of each function) to locate the exception table for that function.
The exception table includes a call site table for the function, which is used to guide the exception handling runtime to take the appropriate action upon an exception. Each call site record in this table is structured as follows:
| CallSite | --> Position of the call site (relative to the function entry)
| CallSite length | --> Length of the call site.
| Landing Pad | --> Position of the landing pad (relative to the landing pad fragment’s begin label)
| Action record offset | --> Position of the first action record
The call site records partition a function into different pieces and describe what action must be taken for each callsite. The callsite fields are relative to the start of the function (as captured in the unwind table).
The landing pad entry is a reference into the function and corresponds roughly to the catch block of a try/catch statement. When execution resumes at a landing pad, it receives an exception structure and a selector value corresponding to the type of the exception thrown, and executes similar to a switch-case statement. The landing pad field is relative to the beginning of the procedure fragment which includes all the landing pads (@LPStart). The C++ ABI requires all landing pads to be in the same fragment. Nonetheless, without basic block sections, @LPStart is the same as the function @Start (found in the unwind table) and can be omitted.
The action record offset is an index into the action table which includes information about which exception types are caught.
**C++ Exceptions with Basic Block Sections**
Basic block sections break the contiguity of a function fragment. Therefore, call sites must be specified relative to the beginning of the basic block section. Furthermore, the unwinding library should be able to find the corresponding callsites for each section. To do so, the .cfi_lsda directive for a section must point to the range of call-sites for that section.
This patch introduces a new **CallSiteRange** structure which specifies the range of call-sites which correspond to every section:
`struct CallSiteRange {
// Symbol marking the beginning of the precedure fragment.
MCSymbol *FragmentBeginLabel = nullptr;
// Symbol marking the end of the procedure fragment.
MCSymbol *FragmentEndLabel = nullptr;
// LSDA symbol for this call-site range.
MCSymbol *ExceptionLabel = nullptr;
// Index of the first call-site entry in the call-site table which
// belongs to this range.
size_t CallSiteBeginIdx = 0;
// Index just after the last call-site entry in the call-site table which
// belongs to this range.
size_t CallSiteEndIdx = 0;
// Whether this is the call-site range containing all the landing pads.
bool IsLPRange = false;
};`
With N basic-block-sections, the call-site table is partitioned into N call-site ranges.
Conceptually, we emit the call-site ranges for sections sequentially in the exception table as if each section has its own exception table. In the example below, two sections result in the two call site ranges (denoted by LSDA1 and LSDA2) placed next to each other. However, their call-sites will refer to records in the shared Action Table. We also emit the header fields (@LPStart and CallSite Table Length) for each call site range in order to place the call site ranges in separate LSDAs. We note that with -basic-block-sections, The CallSiteTableLength will not actually represent the length of the call site table, but rather the reference to the action table. Since the only purpose of this field is to locate the action table, correctness is guaranteed.
Finally, every call site range has one @LPStart pointer so the landing pads of each section must all reside in one section (not necessarily the same section). To make this easier, we decide to place all landing pads of the function in one section (hence the `IsLPRange` field in CallSiteRange).
| @LPStart | ---> Landing pad fragment ( LSDA1 points here)
| CallSite Table Length | ---> Used to find the action table.
| CallSites |
| … |
| … |
| @LPStart | ---> Landing pad fragment ( LSDA2 points here)
| CallSite Table Length |
| CallSites |
| … |
| … |
…
…
| Action Table |
| Types Table |
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73739
This is a fix for PR47630. The regression is caused by the D78011. After
this change the code starts to call the `emitGlobalConstantLargeInt` even
for constants which requires eight bytes to store.
Differential revision: https://reviews.llvm.org/D88261
Until then, this one line fix removes the assert fail with basic block sections
with debug info. Bug tracking this: #47549
This fix does not generate loc list or DW_AT_const_value if the argument is
mentioned in a different section than the start of the function.
Temporarily fixes bugzilla : https://bugs.llvm.org/show_bug.cgi?id=47549
Differential Revision: https://reviews.llvm.org/D87787
If we are going to write handler data (that is written as variable
length data following after the unwind info in .xdata), we need to
emit the handler data immediately, but for cases where no such
info is going to be written, skip emitting it right away. (Unwind
info for all remaining functions that hasn't gotten it emitted
directly is emitted at the end.)
This does slightly change the ordering of sections (triggering a
bunch of updates to DebugInfo/COFF tests), but the change should be
benign.
This also matches GCC's assembly output, which doesn't output
.seh_handlerdata unless it actually is needed.
For ARM64, the unwind info can be packed into the runtime function
entry itself (leaving no data in the .xdata section at all), but
that can only be done if there's no follow-on data in the .xdata
section. If emission of the unwind info is triggered via
EmitWinEHHandlerData (or the .seh_handlerdata directive), which
implicitly switches to the .xdata section, there's a chance of the
caller wanting to pass further data there, so the packed format
can't be used in that case.
Differential Revision: https://reviews.llvm.org/D87448
This changes the order of output sections and the output assembly, but
is otherwise NFC.
It simplifies the TLOF interface by removing two COFF-only methods.
Initial support for dwarf fission sections (-gsplit-dwarf) on wasm.
The most interesting change is support for writing 2 files (.o and .dwo) in the
wasm object writer. My approach moves object-writing logic into its own function
and calls it twice, swapping out the endian::Writer (W) in between calls.
It also splits the import-preparation step into its own function (and skips it when writing a dwo).
Differential Revision: https://reviews.llvm.org/D85685
An AsmPrinter should always be provided to the method because some forms
depend on its parameters. The only place in the codebase which passed
a nullptr value was found in the unit tests, so the patch updates it to
use some dummy AsmPrinter instead.
Differential Revision: https://reviews.llvm.org/D85293
In the case of LTO, several DWARF units can be emitted in one section.
For an extremely large application, they may exceed the limit of 4GiB
for 32-bit offsets. As it is now possible to emit 64-bit debugging info,
the patch enables storing the larger offsets.
Differential Revision: https://reviews.llvm.org/D87026
The string pool is shared among several units in the case of LTO,
and it potentially can exceed the limit of 4GiB for an extremely
large application. As it is now possible to emit 64-bit debugging
info, the limitation can be removed.
Differential Revision: https://reviews.llvm.org/D87025
The patch fixes emitting flags and the debug_line_offset field in
the header, as well as the reference to the macro string for
a pre-standard GNU .debug_macro extension.
Differential Revision: https://reviews.llvm.org/D87024
The patch fixes emitting the unit length field in the header of
the table and offsets to the entry pool. Note that while the patch
changes the common method to emit offsets, in fact, nothing is changed
for Apple accelerator tables, because we do not yet support DWARF64 for
those targets.
Differential Revision: https://reviews.llvm.org/D87023
The patch fixes emitting the header of the table. The content is
independent of the DWARF format.
Differential Revision: https://reviews.llvm.org/D87022
The transition is done by using methods of AsmPrinter which
automatically emit values in compliance with the selected DWARF format.
Differential Revision: https://reviews.llvm.org/D87013
The patch fixes calculating the size of the table and emitting
the fields which depend on the DWARF format by using methods that
choose appropriate sizes automatically.
Differential Revision: https://reviews.llvm.org/D87012
The patch fixes emitting the offset to the type DIE. All other fields
are already fixed in previous patches.
Differential Revision: https://reviews.llvm.org/D87021
These two fixes are better to go together because llvm-dwarfdump is
unable to dump a table when another one is malformed.
Differential Revision: https://reviews.llvm.org/D87018
The patch uses a common method to determine the appropriate form for
the value of the attribute.
Differential Revision: https://reviews.llvm.org/D87016
This is mostly an NFC patch because the involved methods are used when
emitting DWO files, which is incompatible with DWARFv3, or for platforms
where DWARF64 is not supported yet.
Differential Revision: https://reviews.llvm.org/D87015
The patch also adds a method to choose an appropriate DWARF form
to represent section offsets according to the version and the format
of producing debug info.
Differential Revision: https://reviews.llvm.org/D87014
The patch adds a switch to enable emitting debug info in the 64-bit
DWARF format. Most emitter for sections will be updated in the subsequent
patches, whereas for .debug_line and .debug_frame the emitters are in
the MC library, which is already updated.
For now, the switch is enabled only for 64-bit ELF targets.
Differential Revision: https://reviews.llvm.org/D87011
DW_FORM_sec_offset and DW_FORM_strp imply values of different sizes with
DWARF32 and DWARF64. The patch fixes DIE value classes to use correct
sizes when emitting their values. For DIELocList it ensures that the
requested DWARF form matches the current DWARF format because that class
uses a method that selects the size automatically.
Differential Revision: https://reviews.llvm.org/D87009
These methods are used to emit values which are 32-bit in DWARF32 and
64-bit in DWARF64. The patch fixes them so that they choose the length
automatically, depending on the DWARF format set in the Context.
Differential Revision: https://reviews.llvm.org/D87008
This patch introduces the new .bb_addr_map section feature which allows us to emit the bits needed for mapping binary profiles to basic blocks into a separate section.
The format of the emitted data is represented as follows. It includes a header for every function:
| Address of the function | -> 8 bytes (pointer size)
| Number of basic blocks in this function (>0) | -> ULEB128
The header is followed by a BB record for every basic block. These records are ordered in the same order as MachineBasicBlocks are placed in the function. Each BB Info is structured as follows:
| Offset of the basic block relative to function begin | -> ULEB128
| Binary size of the basic block | -> ULEB128
| BB metadata | -> ULEB128 [ MBB.isReturn() OR MBB.hasTailCall() << 1 OR MBB.isEHPad() << 2 ]
The new feature will replace the existing "BB labels" functionality with -basic-block-sections=labels.
The .bb_addr_map section scrubs the specially-encoded BB symbols from the binary and makes it friendly to profilers and debuggers.
Furthermore, the new feature reduces the binary size overhead from 70% bloat to only 12%.
For more information and results please refer to the RFC: https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html
Reviewed By: MaskRay, snehasish
Differential Revision: https://reviews.llvm.org/D85408
Add a DBG_INSTR_REF instruction and a "debug instruction number" field to
MachineInstr. The two allow variable values to be specified by
identifying where the value is computed, rather than the register it lies
in, like so:
%0 = fooinst, debug-instr-number 1
[...]
DBG_INSTR_REF 1, 0
See the original RFC for motivation:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139440.html
This patch is NFCI; it only adds fields and other boiler plate.
Differential Revision: https://reviews.llvm.org/D85741
This is to fix CodeView build failure https://bugs.llvm.org/show_bug.cgi?id=47287
after DIsSubrange upgrade D80197
Assert condition is now removed and Count is calculated in case LowerBound
is absent or zero and Count or UpperBound is constant. If Count is unknown
it is later handled as VLA (currently Count is set to zero).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87406
a warning about clobbering reserved registers (NFC).
Also address some minor inefficiencies and style issues.
Differential Revision: https://reviews.llvm.org/D86088
As stated in section 6.1.1.2, DWARFv5, p. 142,
| The last entry for each name is followed by a zero byte that
| terminates the list. There may be gaps between the lists.
The patch changes emitting a 4-byte zero value to a 1-byte one, which
effectively removes the gap between entry lists, and thus saves
approximately 3 bytes per name; the calculation is not exact because
the total size of the table is aligned to 4.
Differential Revision: https://reviews.llvm.org/D86927
The member is not in use; the unit length for the table is emitted as
a difference between two labels. Moreover, the type of the member might
be misleading, because for DWARF64 the field should be 64 bit long.
Differential Revision: https://reviews.llvm.org/D86912
This reverts commit b9d977b0ca.
This cutoff is no longer required. The commit 34ffa7fc501 (D86153) introduces a
performance improvement which was tested against the motivating case for this
patch.
Discussed in differential revision: https://reviews.llvm.org/D86153
Almost NFC (see end).
The backwards scan in validThroughout significantly contributed to compile time
for a pathological case, causing the 'X86 Assembly Printer' pass to account for
roughly 70% of the run time. This patch guards the loop against running
unnecessarily, bringing the pass contribution down to 4%.
Almost NFC: There is a hack in validThroughout which promotes single constant
value DBG_VALUEs in the prologue to be live throughout the function. We're more
likely to hit this code path with this patch applied. Similarly to the parent
patches there is a small coverage change reported in the order of 10s of bytes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86153
With the changes introduced in D86151 we can now check for single locations
which span multiple blocks for inlined scopes and blocks.
D86151 introduced the InstructionOrdering parameter, replacing a scan through
MBB instructions. The functionality to compare instruction positions across
blocks was add there, and this patch just removes the exit checks that were
previously (but no longer) required.
CTMark shows a geomean binary size reduction of 2.2% for RelWithDebInfo builds.
llvm-locstats (using D85636) shows a very small variable location coverage
change in 5 of 10 binaries, but just like in D86151 it is only in the order of
10s of bytes.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D86152
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
Group the map and methods used to query instruction ordering for trimVarLocs
(D82129) into a class. This will make it easier to reuse the functionality
upcoming patches.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86150
This patch adds type information for SVE ACLE vector types,
by describing them as vectors, with a lower bound of 0, and
an upper bound described by a DWARF expression using the
AArch64 Vector Granule register (VG), which contains the
runtime multiple of 64bit granules in an SVE vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86101
This patch adds support for representing Fortran `character(n)`.
Primarily patch is based out of D54114 with appropriate modifications.
Test case IR is generated using our downstream classic-flang. We're in process
of upstreaming flang PR's but classic-flang has dependencies on llvm, so
this has to get in first.
Patch includes functional test case for both IR and corresponding
dwarf, furthermore it has been manually tested as well using GDB.
Source snippet:
```
program assumedLength
call sub('Hello')
call sub('Goodbye')
contains
subroutine sub(string)
implicit none
character(len=*), intent(in) :: string
print *, string
end subroutine sub
end program assumedLength
```
GDB:
```
(gdb) ptype string
type = character (5)
(gdb) p string
$1 = 'Hello'
```
Reviewed By: aprantl, schweitz
Differential Revision: https://reviews.llvm.org/D86305
The byte swapping, when dealing with 4 byte (float) FP constants
in DwarfExpression::addConstantFP, added in commit ef8992b9f0
was not correct. It always performed byte swapping using an
uint64_t value. When dealing with 4 byte values the 4 interesting
bytes ended up in the big end of the uint64_t, but later we emitted
the 4 bytes at the little end. So we ended up with zeroes being
emitted and faulty debug information.
This patch simplifies things a bit, IMHO. Using the APInt
representation throughout the function, instead of looking at
the internal representation using getRawBytes and without using
reinterpret_cast etc. And using API.byteSwap() should result in
correct byte swapping independent of APInt being 4 or 8 bytes.
Differential Revision: https://reviews.llvm.org/D86272
This patch was reverted in 7c182663a8 due to some failures
observed on PCC based machines. Failures were due to Endianness issue and
long double representation issues.
Patch is revised to address Endianness issue. Furthermore, support
for emission of `DW_OP_implicit_value` for `long double` has been removed
(since it was unclean at the moment). Planning to handle this in
a clean way soon!
For more context, please refer to following review link.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
Theory was that we should never reach a non-type unit (eg: type in an
anonymous namespace) when we're already in the invalid "encountered an
address-use, so stop emitting types for now, until we throw out the
whole type tree to restart emitting in non-type unit" state. But that's
not the case (prior commit cleaned up one reason this wasn't exposed
sooner - but also makes it easier to test/demonstrate this issue)
This reads more like what you'd expect the DWARF to look like (from the
lexical order of C++ - template parameters come before members, etc),
and also happens to make it easier to tickle (& thus test) a bug related
to type units and Split DWARF I'm about to fix.
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
Allow the GNU .debug_macro extension to be emitted for DWARF versions
earlier than 5. The extension is basically what became DWARF 5's format,
except that a DW_AT_GNU_macros attribute is emitted, and some entries
like the strx entries are missing. In this patch I emit GNU's indirect
entries, which are the same as DWARF 5's strp entries.
This patch adds the extension behind a hidden LLVM flag,
-use-gnu-debug-macro. I would later want to enable it by default when
tuning for GDB and targeting DWARF versions earlier than 5.
The size of a Clang 8.0 binary built with RelWithDebInfo and the flags
"-gdwarf-4 -fdebug-macro" reduces from 1533 MB to 1349 MB with
.debug_macro (compared to 1296 MB without -fdebug-macro).
Reviewed By: SouraVX, dblaikie
Differential Revision: https://reviews.llvm.org/D82975
Broken out from a review comment on D82975. This is an NFC expect for
that the Macinfo macro string is now emitted using a single emitBytes()
invocation, so it can be done using a single string directive.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D83557
Move the Dwarf version checks that determine if the .debug_macro section
should be emitted, into a DwarfDebug member. This is a preparatory
refactoring for allowing the GNU .debug_macro extension, which is a
precursor to the DWARF 5 format, to be emitted by LLVM for earlier DWARF
versions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82971
This patch adds the missing information to the LF_BUILDINFO record, which allows for rebuilding a .CPP without any external dependency but the .OBJ itself (other than the compiler).
Some external tools that we are using (Recode, Live++) are extracting the information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variables). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
This also fixes the condition in the assertion in
DwarfCompileUnit::getLabelBegin() because it checked something unrelated
to the returned value.
Differential Revision: https://reviews.llvm.org/D85437
This removes members of the DIEUnit class which were used only in unit
tests. Note also that child classes shadowed some of these methods,
namely, getDwarfVersion() was overridden in DwartfUnit and getLength()
was overridden in DwarfCompileUnit.
Differential Revision: https://reviews.llvm.org/D85436
This patch changes the functionality of AsmPrinter to name the basic block end labels as LBB_END${i}_${j}, with ${i} being the identifier for the function and ${j} being the identifier for the basic block. The new naming scheme is consistent with how basic block labels are named (.LBB${i}_{j}), and how function end symbol are named (.Lfunc_end${i}) and helps to write stronger tests for the upcoming patch for BB-Info section (as proposed in https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html). The end label is used with basicblock-labels (BB-Info section in future) and basicblock-sections to compute the size of basic blocks and basic block sections, respectively. For BB sections, the section containing the entry basic block will not have a BB end label since it already gets the function end-label.
This label is cached for every basic block (CachedEndMCSymbol) like the label for the basic block (CachedMCSymbol).
Differential Revision: https://reviews.llvm.org/D83885
The CFA is calculated as (SP/FP + offset), but when there are
SVE objects on the stack the SP offset is partly scalable and
should instead be expressed as the DWARF expression:
SP + offset + scalable_offset * VG
where VG is the Vector Granule register, containing the
number of 64bits 'granules' in a scalable vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84043
The patch restricts DIEDelta::SizeOf() to accept only DWARF forms that
are actually used in the LLVM codebase. This should make the use of the
class more explicit and help to avoid issues similar to fixed in D83958
and D84094.
Differential Revision: https://reviews.llvm.org/D84095
DIELabel can emit only 32- or 64-bit values, while it was created in
some places with DW_FORM_udata, which implies emitting uleb128.
Nevertheless, these places also expected to emit U32 or U64, but just
used a misleading DWARF form. The patch updates those places to use more
appropriate DWARF forms and restricts DIELabel::SizeOf() to accept only
forms that are actually used in the LLVM codebase.
Differential Revision: https://reviews.llvm.org/D84094
DIELocList is used with a limited number of DWARF forms, see the only
place where it is instantiated, DwarfCompileUnit::addLocationList().
The patch marks the unexpected execution path in DIELocList::SizeOf()
as unreachable, to reduce ambiguity.
Differential Revision: https://reviews.llvm.org/D84092
Emit DWARF 5 call-site symbols even though DWARF 4 is set,
only in the case of LLDB tuning.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83463
PassManager.h is one of the top headers in the ClangBuildAnalyzer frontend worst offenders list.
This exposes a large number of implicit dependencies on various forward declarations/includes in other headers that need addressing.
SONY debugger does not prefer debug entry values feature, so
the plan is to avoid production of the entry values
by default when the tuning is SCE debugger.
The feature still can be enabled with the -debug-entry-values
option for the testing/development purposes.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83462
Test case `test/CodeGen/WebAssembly/stackified-debug.ll`
was failing due to malformed DwarfExpression.
This failure has been seen in lot of bots, for instance in:
http://lab.llvm.org:8011/builders/lld-x86_64-ubuntu-fast/builds/18794
: 'RUN: at line 1'
/home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/build/bin/llc
/home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/build/bin/FileCheck /home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/llvm-project/llvm/test/CodeGen/WebAssembly/stackified-debug.ll
home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/llvm-project/llvm/test/CodeGen/WebAssembly/stackified-debug.ll:26:10: error: CHECK: expected string not found in input
CHECK: .int16 4 # Loc expr size
^
<stdin>:34:2: note: scanning from here
.int16 3 # Loc expr size
Differential Revision: https://reviews.llvm.org/D83560
This patch was reverted in 9d2da6759b due to assertion failure seen
in `test/DebugInfo/Sparc/subreg.ll`. Assertion failure was happening
due to malformed/unhandeled DwarfExpression.
Differential Revision: https://reviews.llvm.org/D83560
Summary:
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
This is an alternative proposal to D81476 (and D82084) - the details were sufficiently confusing to me it seemed easier to write some code and see how it looks.
Reviewers: SouraVX
Differential Revision: https://reviews.llvm.org/D84278
Summary:
AIX assembly's .set directive is not usable for aliasing purpose.
We need to use extra-label-at-defintion strategy to generate symbol
aliasing on AIX.
Reviewed By: DiggerLin, Xiangling_L
Differential Revision: https://reviews.llvm.org/D83252
Summary:
This patch reduces file size in debug builds by dropping variable locations a
debugger user will not see.
After building the debug entity history map we loop through it. For each
variable we look at each entry. If the entry opens a location range which does
not intersect any of the variable's scope's ranges then we mark it for removal.
After visiting the entries for each variable we also mark any clobbering
entries which will no longer be referenced for removal, and then finally erase
the marked entries. This all requires the ability to query the order of
instructions, so before this runs we number them.
Tests:
Added llvm/test/DebugInfo/X86/trim-var-locs.mir
Modified llvm/test/DebugInfo/COFF/register-variables.ll
Branch folding merges the tails of if.then and if.else into if.else. Each
blocks' debug-locations point to different scopes so when they're merged we
can't use either. Because of this the variable 'c' ends up with a location
range which doesn't cover any instructions in its scope; with the patch
applied the location range is dropped and its flag changes to IsOptimizedOut.
Modified llvm/test/DebugInfo/X86/live-debug-variables.ll
Modified llvm/test/DebugInfo/ARM/PR26163.ll
In both tests an out of scope location is now removed. The remaining location
covers the entire scope of the variable allowing us to emit it as a single
location.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D82129
Summary:
This support is needed for the Fortran array variables with pointer/allocatable
attribute. This support enables debugger to identify the status of variable
whether that is currently allocated/associated.
for pointer array (before allocation/association)
without DW_AT_associated
(gdb) pt ptr
type = integer (140737345375288:140737354129776)
(gdb) p ptr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_associated
(gdb) pt ptr
type = integer (:)
(gdb) p ptr
$1 = <not associated>
for allocatable array (before allocation)
without DW_AT_allocated
(gdb) pt arr
type = integer (140737345375288:140737354129776)
(gdb) p arr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_allocated
(gdb) pt arr
type = integer, allocatable (:)
(gdb) p arr
$1 = <not allocated>
Testing
- unit test cases added
- check-llvm
- check-debuginfo
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83544
For now, DIEExpr is used only in two places:
1) in the debug info library unit test suite to emit
a DW_AT_str_offsets_base attribute with the DW_FORM_sec_offset
form, see dwarfgen::DIE::addStrOffsetsBaseAttribute();
2) in DwarfCompileUnit::addLocationAttribute() to generate the location
attribute for a TLS variable.
The later case used an incorrect DWARF form of DW_FORM_udata, which
implies storing an uleb128 value, not a 4/8 byte constant. The generated
result was as expected because DIEExpr::SizeOf() did not handle the used
form, but returned the size of the code pointer by default.
The patch fixes the issue by using more appropriate DWARF forms for
the problematic case and making DIEExpr::SizeOf() more straightforward.
Differential Revision: https://reviews.llvm.org/D83958
This patch handles CFI with basic block sections, which unlike DebugInfo does
not support ranges. The DWARF standard explicitly requires emitting separate
CFI Frame Descriptor Entries for each contiguous fragment of a function. Thus,
the CFI information for all callee-saved registers (possibly including the
frame pointer, if necessary) have to be emitted along with redefining the
Call Frame Address (CFA), viz. where the current frame starts.
CFI directives are emitted in FDE’s in the object file with a low_pc, high_pc
specification. So, a single FDE must point to a contiguous code region unlike
debug info which has the support for ranges. This is what complicates CFI for
basic block sections.
Now, what happens when we start placing individual basic blocks in unique
sections:
* Basic block sections allow the linker to randomly reorder basic blocks in the
address space such that a given basic block can become non-contiguous with the
original function.
* The different basic block sections can no longer share the cfi_startproc and
cfi_endproc directives. So, each basic block section should emit this
independently.
* Each (cfi_startproc, cfi_endproc) directive will result in a new FDE that
caters to that basic block section.
* Now, this basic block section needs to duplicate the information from the
entry block to compute the CFA as it is an independent entity. It cannot refer
to the FDE of the original function and hence must duplicate all the stuff that
is needed to compute the CFA on its own.
* We are working on a de-duplication patch that can share common information in
FDEs in a CIE (Common Information Entry) and we will present this as a follow up
patch. This can significantly reduce the duplication overhead and is
particularly useful when several basic block sections are created.
* The CFI directives are emitted similarly for registers that are pushed onto
the stack, like callee saved registers in the prologue. There are cfi
directives that emit how to retrieve the value of the register at that point
when the push happened. This has to be duplicated too in a basic block that is
floated as a separate section.
Differential Revision: https://reviews.llvm.org/D79978
This fixes warnings raised by Clang's new -Wsuggest-override, in preparation for enabling that warning in the LLVM build. This patch also removes the virtual keyword where redundant, but only in places where doing so improves consistency within a given file. It also removes a couple unnecessary virtual destructor declarations in derived classes where the destructor inherited from the base class is already virtual.
Differential Revision: https://reviews.llvm.org/D83709
Caused by uninitialized load of llvm::DwarfDebug::PrevCU:
llvm::DwarfCompileUnit::addRange () at ../lib/CodeGen/AsmPrinter/DwarfCompileUnit.cpp:276
llvm::DwarfDebug::endFunctionImpl () at ../lib/CodeGen/AsmPrinter/DwarfDebug.cpp:1586
llvm::DebugHandlerBase::endFunction () at ../lib/CodeGen/AsmPrinter/DebugHandlerBase.cpp:319
llvm::AsmPrinter::EmitFunctionBody () at ../lib/CodeGen/AsmPrinter/AsmPrinter.cpp:1230
llvm::ARMAsmPrinter::runOnMachineFunction () at ../lib/Target/ARM/ARMAsmPrinter.cpp:161
Most of the DebugInfo tests under `LLVM_LIT_ARGS:STRING=-sv --vg` prior to this fix, and pass with the fix applied.
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D81631
This patch adds some missing information to the LF_BUILDINFO which allows for rebuilding an .OBJ without any external dependency but the .OBJ itself (other than the compiler executable).
Some tools need this information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO therefore stores a full path to the compiler, the PWD (which is the CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variable). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
Since the `RISCVExpandPseudo` pass has been split from
`RISCVExpandAtomicPseudo` pass, it would be nice to run the former as
early as possible (The latter has to be run as late as possible to
ensure correctness). Running earlier means we can reschedule these pairs
as we see fit.
Running earlier in the machine pass pipeline is good, but would mean
teaching many more passes about `hasLabelMustBeEmitted`. Splitting the
basic blocks also pessimises possible optimisations because some
optimisations are MBB-local, and others are disabled if the block has
its address taken (which is notionally what `hasLabelMustBeEmitted`
means).
This patch uses a new approach of setting the pre-instruction symbol on
the AUIPC instruction to a temporary symbol and referencing that. This
avoids splitting the basic block, but allows us to reference exactly the
instruction that we need to. Notionally, this approach seems more
correct because we do actually want to address a specific instruction.
This then allows the pass to be moved much earlier in the pass pipeline,
before both scheduling and register allocation. However, to do so we
must leave the MIR in SSA form (by not redefining registers), and so use
a virtual register for the intermediate value. By using this virtual
register, this pass now has to come before register allocation.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D82988
Occasionally we see absolutely massive basic blocks, typically in global
constructors that are vulnerable to heavy inlining. When these blocks are
dense with DBG_VALUE instructions, we can hit near quadratic complexity in
DwarfDebug's validThroughout function. The problem is caused by:
* validThroughout having to step through all instructions in the block to
examine their lexical scope,
* and a high proportion of instructions in that block being DBG_VALUEs
for a unique variable fragment,
Leading to us stepping through every instruction in the block, for (nearly)
each instruction in the block.
By adding this guard, we force variables in large blocks to use a location
list rather than a single-location expression, as shown in the added test.
This shouldn't change the meaning of the output DWARF at all: instead we
use a less efficient DWARF encoding to avoid a poor-performance code path.
Differential Revision: https://reviews.llvm.org/D83236
Summary:
When a desired symbol name contains invalid character that the
system assembler could not process, we need to emit .rename
directive in assembly path in order for that desired symbol name
to appear in the symbol table.
Reviewed By: hubert.reinterpretcast, DiggerLin, daltenty, Xiangling_L
Differential Revision: https://reviews.llvm.org/D82481
This patch uses ranges for debug information when a function contains basic block sections rather than using [lowpc, highpc]. This is also the first in a series of patches for debug info and does not contain the support for linker relaxation. That will be done as a follow up patch.
Differential Revision: https://reviews.llvm.org/D78851
Summary:
This is a fix for PR45009.
When working on D67492 I made DwarfExpression emit a single
DW_OP_entry_value operation covering the whole composite location
description that is produced if a register does not have a valid DWARF
number, and is instead composed of multiple register pieces. Looking
closer at the standard, this appears to not be valid DWARF. A
DW_OP_entry_value operation's block can only be a DWARF expression or a
register location description, so it appears to not be valid for it to
hold a composite location description like that.
See DWARFv5 sec. 2.5.1.7:
"The DW_OP_entry_value operation pushes the value that the described
location held upon entering the current subprogram. It has two
operands: an unsigned LEB128 length, followed by a block containing a
DWARF expression or a register location description (see Section
2.6.1.1.3 on page 39)."
Here is a dwarf-discuss mail thread regarding this:
http://lists.dwarfstd.org/pipermail/dwarf-discuss-dwarfstd.org/2020-March/004610.html
There was not a strong consensus reached there, but people seem to lean
towards that operations specified under 2.6 (e.g. DW_OP_piece) may not
be part of a DWARF expression, and thus the DW_OP_entry_value operation
can't contain those.
Perhaps we instead want to emit a entry value operation per each
DW_OP_reg* operation, e.g.:
- DW_OP_entry_value(DW_OP_regx sub_reg0),
DW_OP_stack_value,
DW_OP_piece 8,
- DW_OP_entry_value(DW_OP_regx sub_reg1),
DW_OP_stack_value,
DW_OP_piece 8,
[...]
The question then becomes how the call site should look; should a
composite location description be emitted there, and we then leave it up
to the debugger to match those two composite location descriptions?
Another alternative could be to emit a call site parameter entry for
each sub-register, but firstly I'm unsure if that is even valid DWARF,
and secondly it seems like that would complicate the collection of call
site values quite a bit. As far as I can tell GCC does not emit any
entry values / call sites in these cases, so we do not have something to
compare with, but the former seems like the more reasonable approach.
Currently when trying to emit a call site entry for a parameter composed
of multiple DWARF registers a (DwarfRegs.size() == 1) assert is
triggered in addMachineRegExpression(). Until the call site
representation is figured out, and until there is use for these entry
values in practice, this commit simply stops the invalid DWARF from
being emitted.
Reviewers: djtodoro, vsk, aprantl
Reviewed By: djtodoro, vsk
Subscribers: jyknight, hiraditya, fedor.sergeev, jrtc27, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75270
This function is deceptive at best: it doesn't return what you'd expect.
If you have an arbitrary GlobalValue and you want to determine the
alignment of that pointer, Value::getPointerAlignment() returns the
correct value. If you want the actual declared alignment of a function
or variable, GlobalObject::getAlignment() returns that.
This patch switches all the users of GlobalValue::getAlignment to an
appropriate alternative.
Differential Revision: https://reviews.llvm.org/D80368
Following on from this RFC[0] from a while back, this is the first patch towards
implementing variadic debug values.
This patch specifically adds a set of functions to MachineInstr for performing
operations specific to debug values, and replacing uses of the more general
functions where appropriate. The most prevalent of these is replacing
getOperand(0) with getDebugOperand(0) for debug-value-specific code, as the
operands corresponding to values will no longer be at index 0, but index 2 and
upwards: getDebugOperand(x) == getOperand(x+2). Similar replacements have been
added for the other operands, along with some helper functions to replace
oft-repeated code and operate on a variable number of value operands.
[0] http://lists.llvm.org/pipermail/llvm-dev/2020-February/139376.html<Paste>
Differential Revision: https://reviews.llvm.org/D81852
This patch adds some missing information to the LF_BUILDINFO which allows for rebuilding an .OBJ without any external dependency but the .OBJ itself (other than the compiler executable).
Some tools need this information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO therefore stores a full path to the compiler, the PWD (which is the CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variable). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
Summary:
Add a flag to omit the xray_fn_idx to cut size overhead and relocations
roughly in half at the cost of reduced performance for single function
patching. Minor additions to compiler-rt support per-function patching
without the index.
Reviewers: dberris, MaskRay, johnislarry
Subscribers: hiraditya, arphaman, cfe-commits, #sanitizers, llvm-commits
Tags: #clang, #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D81995
SUMMARY:
Since we deal with aix emitLinkage in the PPCAIXAsmPrinter::emitLinkage() in the patch https://reviews.llvm.org/D75866. It do not go to AsmPrinter::emitLinkage() any more, we clean up some aix related code in the AsmPrinter::emitLinkage()
Reviewers: Jason liu
Differential Revision: https://reviews.llvm.org/D81613
SUMMARY:
in the aix assembly , it do not have .hidden and .protected directive.
in current llvm. if a function or a variable which has visibility attribute, it will generate something like the .hidden or .protected , it can not recognize by aix as.
in aix assembly, the visibility attribute are support in the pseudo-op like
.extern Name [ , Visibility ]
.globl Name [, Visibility ]
.weak Name [, Visibility ]
in this patch, we implement the visibility attribute for the global variable, function or extern function .
for example.
extern __attribute__ ((visibility ("hidden"))) int
bar(int* ip);
__attribute__ ((visibility ("hidden"))) int b = 0;
__attribute__ ((visibility ("hidden"))) int
foo(int* ip){
return (*ip)++;
}
the visibility of .comm linkage do not support , we will have a separate patch for it.
we have the unsupported cases ("default" and "internal") , we will implement them in a a separate patch for it.
Reviewers: Jason Liu ,hubert.reinterpretcast,James Henderson
Differential Revision: https://reviews.llvm.org/D75866
Commit d77ae1552f ("[DebugInfo] Support to emit debugInfo
for extern variables") added support to emit debuginfo
for extern variables. Currently, only BPF target enables to
emit debuginfo for extern variables.
But if the extern variable has "void" type, the compilation will
fail.
-bash-4.4$ cat t.c
extern void bla;
void *test() {
void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
missing global variable type
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
isLocal: false, isDefinition: false)
...
fatal error: error in backend: Broken module found, compilation aborted!
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace,
preprocessed source, and associated run script.
Stack dump:
...
The IR requires a DIGlobalVariable must have a valid type and the
"void" type does not generate any type, hence the above fatal error.
Note that if the extern variable is defined as "const void", the
compilation will succeed.
-bash-4.4$ cat t.c
extern const void bla;
const void *test() {
const void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
-bash-4.4$ cat t.ll
...
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
type: !6, isLocal: false, isDefinition: false)
!6 = !DIDerivedType(tag: DW_TAG_const_type, baseType: null)
...
Since currently, "const void extern_var" is supported by the
debug info, it is natural that "void extern_var" should also
be supported. This patch disabled assertion of "void extern_var"
in IR verifier and add proper guarding when emiting potential
null debug info type to dwarf types.
Differential Revision: https://reviews.llvm.org/D81131
This adds call site info support for call instructions with delay slot.
Search for instructions inside call delay slot, which load value
into parameter forwarding registers.
Return address of the call points to instruction after call delay slot,
which is not the one, immediately after the call instruction.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D78107
The collectCallSiteParameters() method searches for instructions
which load values into registers used for parameters passing.
Previously, interpretation of those values, loaded by one such
instruction, was implemented inside collectCallSiteParameters() method.
This patch moves the interpretation code from collectCallSiteParameters()
method into a separate static method named interpretValue. New method is
called from collectCallSiteParameters() to process each instruction from
targeted instruction scope.
The collectCallSiteParameters() searches for loaded parameter value
among instructions which precede the call instruction, inside the same
basic block. When needed, new method (interpretValue) could be used for
searching any instruction scope.
This is preparation for search of parameter value, loaded inside call
delay slot.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D78106
These cases all follow the same pattern:
struct A {
friend class X;
//...
class X {};
};
But 'friend class X;' injects 'X' into the surrounding namespace scope,
rather than introducing a class member. So the second 'class X {}' is a
completely different type, which changes the meaning of the earlier name
'X' from '::X' to 'A::X'.
Additionally, the friend declaration is pointless -- members of a class
don't need to be befriended to be able to access private members.
This patch adds support for emission of following DWARFv5 macro
forms in .debug_macro.dwo section:
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D78866
DW_MACRO_define_strx forms are supported now in llvm-dwarfdump and these
forms can be used in both debug_macro[.dwo] sections. An added advantage
for using strx forms over strp forms is that it uses indices
approach instead of a relocation to debug_str section.
This patch unify the emission for debug_macro section.
Reviewed by: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D78865
Since on AIX, our strategy is to not use -u to suppress any undefined
symbols, we need to emit .extern for the symbols with AvailableExternally
linkage.
Differential Revision: https://reviews.llvm.org/D80642
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
Use getFunctionEntryPointSymbol whenever possible to enclose the
implementation detail and reduce duplicate logic.
Differential Revision: https://reviews.llvm.org/D80402
Summary:
A struct argument can be passed-by-value to a callee via a pointer to a
temporary stack copy. Add support for emitting an entry value DBG_VALUE
when an indirect parameter DBG_VALUE becomes unavailable. This is done
by omitting DW_OP_stack_value from the entry value expression, to make
the expression describe the location of an object.
rdar://63373691
Reviewers: djtodoro, aprantl, dstenb
Subscribers: hiraditya, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D80345
-fno-PIC and -fPIE code generally cannot be linked in -shared mode and there is no benefit accessing via local aliases.
Actually, a .Lfoo$local reference will be converted to a STT_SECTION (if no section relaxation) reference which will cause the section symbol (sizeof(Elf64_Sym)=24) to be generated.
-fno-semantic-interposition is currently the CC1 default. (The opposite
disables some interprocedural optimizations.) However, it does not infer
dso_local: on most targets accesses to ExternalLinkage functions/variables
defined in the current module still need PLT/GOT.
This patch makes explicit -fno-semantic-interposition infer dso_local,
so that PLT/GOT can be eliminated if targets implement local aliases
for AsmPrinter::getSymbolPreferLocal (currently only x86).
Currently we check whether the module flag "SemanticInterposition" is 0.
If yes, infer dso_local. In the future, we can infer dso_local unless
"SemanticInterposition" is 1: frontends other than clang will also
benefit from the optimization if they don't bother setting the flag.
(There will be risks if they do want ELF interposition: they need to set
"SemanticInterposition" to 1.)
Replace with forward declaration and move dependency down to source files that actually need it.
Both TargetLowering.h and TargetMachine.h are 2 of the most expensive headers (top 10) in the ClangBuildAnalyzer report when building llc.
This reverts commit 525a591f0f.
Fixed an issue with pointers to members based on typedefs. In this case,
LLVM would emit a second UDT. I fixed it by not passing the class type
to getTypeIndex when the base type is not a function type. lowerType
only uses the class type for direct function types. This suggests if we
have a PMF with a function typedef, there may be an issue, but that can
be solved separately.
> Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
>
> Differential Revision: https://reviews.llvm.org/D79447
This causes asserts in Chromium builds:
CodeViewDebug.cpp:2997: void llvm::CodeViewDebug::emitDebugInfoForUDTs(const std::vector<std::pair<std::string, const DIType *>> &):
Assertion `OriginalSize == UDTs.size()' failed.
I will follow up on the Phabricator issue.
for variables in nested scopes (including inlined functions) if there is a
single location which covers the entire scope and the scope is contained in a
single block.
Based on work by @jmorse.
Reviewed By: vsk, aprantl
Differential Revision: https://reviews.llvm.org/D79571
This is a no-op/NFC at the moment & generally makes the code /somewhat/
cleaner/less reliant on assumptions about what will produce a debug_addr
section.
It's still a bit "spooky action at a distance" - the add ranges code
pre-emptively inserts addresses into the address pool it knows will
eventually be used by the range emission code (or low/high pc).
The 'ideal' would be either to actually compute the addresses needed for
range (& loc) emission earlier - which would mean decanonicalizing the
range/loc representation earlier to account for whether it was going to
use addrx encodings or not (which would be unfortunate, but could be
refactored to be relatively unobtrusive).
Alternatively, emitting the range/loc sections earlier would cause them
to request the needed addresses sooner - but then you endup having to
split finalizeModuleInfo because some things need to be handled there
before the ranges/locs are emitted, I think...
Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
Differential Revision: https://reviews.llvm.org/D79447
jasonliu