Clang will encode names that should be able to be simplified as
"_STNname|<template, args>" (eg: "_STNt1|<int>") - this verification
mode will detect these names, decode them, create the original name
("t1<int>") and the simple name ("t1") - letting the simple name run
through the usual rebuilding logic - then compare the two sources of the
full name - the rebuilt and the _STN encoding.
This helps ensure that -gsimple-template-names is lossless.
This should probably be rendered as "std::nullptr_t" but for now clang
uses the unqualified name (which is ambiguous with possible user defined
name in the global namespace), so match that here.
Most PDB fields on disk are 32-bit but describe the file in terms of MSF
blocks, which are 4 kiB by default.
So PDB files can be a bit larger than 4 GiB, and much larger if you create them
with a block size > 4 kiB.
This is a first (necessary, but by far not not sufficient) step towards
supporting such PDB files. Now we don't truncate in-memory file offsets (which
are in terms of bytes, not in terms of blocks).
No effective behavior change. lld-link will still error out if it were to
produce PDBs > 4 GiB.
Differential Revision: https://reviews.llvm.org/D109923
Laying more foundation for full template name rebuilding - more complex
type printing benefits from an object to carry some state rather than
passing it around as parameters to every function.
DWARFUnit::clearDIEs() uses std::vector::shrink_to_fit() to make
capacity of DieArray matched with its size(). The shrink_to_fit()
is not binding request to make capacity match with size().
Thus the memory could still be reserved after DWARFUnit::clearDIEs()
is called. This patch erases capacity when DWARFUnit::clearDIEs() is requested.
So the memory occupied by dies would be freed.
Differential Revision: https://reviews.llvm.org/D109499
Since we might end up using multiple threads when logging information in the DWARFTransformer, the handleDie() method must use the supplied stream named "OS" when logging warnings and errors. When we use multiple threads, we log to a thread specific stream buffer and then use a mutex to ensure our output doesn't overlap when we emit warnings and errors after a thread is done.
Differential Revision: https://reviews.llvm.org/D109401
This does add some extra superfluous whitespace (eg: "int *") intended
to make the Simplified Template Names work easier - this makes the
DIE-based names match more exactly the clang-generated names, so it's
easier to identify cases that don't generate matching names.
(arguably we could change clang to skip that whitespace or add some
fuzzy matching to accommodate differences in certain whitespace - but
this seemed easier and fairly low-impact)
This is used by BOLT to do patching of DebugInfo section, and Line Table. Directly by using find, and through getAttrFieldOffsetForUnit.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D107874
DWARFDie::getDeclFile(...) previously only supported getting the DW_AT_decl_file if the DIE itself contained the DW_AT_decl_file attribute, or if the DIE had a DW_AT_abstract_origin that pointed to another DIE that had a DW_AT_decl_file. This patch allows the function to get the right attribute value if there is a DW_AT_specification that points to another DIE. We also test that if a DW_AT_abtract_origin or DW_AT_specification points to a DIE in another CU with a DW_FORM_ref_addr, that the right line table is used to extract the file index.
Full tests were added for the following cases:
- DIE has a DW_AT_decl_file attribute
- DIE has a DW_AT_abtract_origin that points to another die in the same CU
- DIE has a DW_AT_abtract_origin that points to another die in another CU
- DIE has a DW_AT_specification that points to another die in the same CU
- DIE has a DW_AT_specification that points to another die in another CU
Differential Revision: https://reviews.llvm.org/D108480
When a function has no line table, but does have debug info (DW_TAG_subprogram), we fall back to creating a line table with a single line entry that has the start address of the function and the source file and line of the function declaration. The bug in this code was that we might have a DW_TAG_subprogram that uses a DW_AT_specification or DW_AT_abstract_origin that points to another DIE, and that DIE might be in another compile unit. The bug was we were grabbing the file index value from the DIE, and that index could be from the other DIE in another compile unit that has its own and compleltely different file table, so we might be using a file index from one compile unit with the file table from another. This was causing a crash in llvm-gsymuil when run against dSYM files. dsymutil, the Apple DWARF linker, will often unique types and can end up with more absolute references across different compile units.
The fix is to use the DWARFDie::getDeclFile(...) accessor as it does fetch this information correctly.
Differential Revision: https://reviews.llvm.org/D108497
verifyDieRanges function checks for the intersected address ranges.
It adds child DieRangeInfo into parent DieRangeInfo to check
whether children have overlapping address ranges. It is safe to not add
DieRangeInfo with empty address range into parent's children list.
This decreases the number of children which should be navigated and as a result
decreases execution time(parents having a lot of children with empty ranges
spend much time navigating them). For this command: "llvm-dwarfdump --verify clang-repl"
execution time decreased from 220 sec till 75 sec.
Differential Revision: https://reviews.llvm.org/D107554
This ensures that debug_types references aren't looked for in
debug_info section.
Behavior is still going to be questionable in an unlinked object file -
since cross-cu references could refer to symbols in another .debug_info
(or, in theory, .debug_types) chunk - but if a producer only uses
ref_addr to refer to things within the same .debug_info chunk in an
object file (eg: whole program optimization/LTO - producing two CUs into
a single .debug_info section in an object file - the ref_addrs there
could be resolved relative to that .debug_info chunk, not needing to
consider comdat (DWARFv5 type units or other creatures) chunks of
.debug_info, etc)
Some files still contained the old University of Illinois Open Source
Licence header. This patch replaces that with the Apache 2 with LLVM
Exception licence.
Differential Revision: https://reviews.llvm.org/D107528
When we build with split dwarf in single mode the .o files that contain both "normal" debug sections and dwo sections, along with relocaiton sections for "normal" debug sections.
When we create DWARF context in DWARFObjInMemory we process relocations and store them in the map for .debug_info, etc section.
For DWO Context we also do it for non dwo dwarf sections. Which I believe is not necessary. This leads to a lot of memory being wasted. We observed 70GB extra memory being used.
I went with context sensitive approach, flag is passed in. I am not sure if it's always safe not to process relocations for regular debug sections if Obj contains .dwo sections.
If it is alternatvie might be just to scan, in constructor, sections and if there are .dwo sections not to process regular debug ones.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D106624
list for attributes that don't have the loclist class.
Summary: The overflow error occurs when we try to dump
location list for those attributes that do not have the
loclist class, like DW_AT_count and DW_AT_byte_size.
After re-reviewed the entire list, I sorted those
attributes into two parts, one for dumping location list
and one for dumping the location expression.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D105613
This fixes an assert firing when compiling code which involves 128 bit
integrals.
This would trigger runtime checks similar to this:
```
Assertion failed: getMinSignedBits() <= 64 && "Too many bits for int64_t", file llvm/include/llvm/ADT/APInt.h, line 1646
```
To get around this, we just saturate those big values.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D105320
At most these use the StringRef/Twine wrappers and don't have any implicit uses of std::string.
Move the include down to any cpp implementation where std::string is actually used.
This call would incorrectly overwrite (with the .debug_rnglists.dwo from
the executable, if there was one) the rnglists section instead of the
correct value (from the .debug_rnglists.dwo in the .dwo file) that's
applied in DWARFUnit::tryExtractDIEsIfNeeded
Originally committed as 04c203e310
Reverted in 768510632c due to the test
failing when encountering windows directory separators.
Fix the path separator platform issue with a FileCheck pattern {{[/\\]}}
Original commit message:
A followup to the feature added in 69da27c749
that added the optional "start file name" to match "start line" - but this
didn't work with Split DWARF because of the need for the decl file number
resolution code to refer back to the skeleton unit to find its .debug_line
contribution. So this patch adds the necessary infrastructure to track the
skeleton unit corresponding to a split full unit for the purpose of this
lookup.
A followup to the feature added in
69da27c749 that added the optional "start
file name" to match "start line" - but this didn't work with Split DWARF
because of the need for the decl file number resolution code to refer
back to the skeleton unit to find its .debug_line contribution. So this
patch adds the necessary infrastructure to track the skeleton unit
corresponding to a split full unit for the purpose of this lookup.
Symbol tables can have symbols with no size in mach-o files that were failing to get combined into a single entry. This resulted in many duplicate entries for the same address and made gsym files larger.
Differential Revision: https://reviews.llvm.org/D105068
llvm-dwarfdump was silent even when the format of DWARF was invalid
and/or llvm-dwarfdump did not understand/support some of the constructs.
This can be pretty confusing as llvm-dwarfdump is a tool for DWARF
producers+consumers development.
Review comments also by @dblaikie.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D104271
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
This patch is to address https://bugs.llvm.org/show_bug.cgi?id=50459.
YAML:455:28: error: GUID strings are 38 characters long
The valid format for a GUID is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
where X is a hex digit (0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F).
The length of the individual components must be: 8, 4, 4, 4, 12.
For some cases, the converted string generated by obj2yaml, does not
comply with those lengths. yaml2obj checks that the GUID string must
be 38 characters including the dashes and braces.
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D103089
getRelocatedSection interface should not check that the object file is
relocatable, as executable files may have relocations preserved with
`--emit-relocs` linker flag. The relocations are useful in context of post-link
binary analysis for function reference identification. For example, BOLT relies
on relocations to perform function reordering.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D102296
David Blaikie