Clang will encode names that should be able to be simplified as
"_STNname|<template, args>" (eg: "_STNt1|<int>") - this verification
mode will detect these names, decode them, create the original name
("t1<int>") and the simple name ("t1") - letting the simple name run
through the usual rebuilding logic - then compare the two sources of the
full name - the rebuilt and the _STN encoding.
This helps ensure that -gsimple-template-names is lossless.
This should probably be rendered as "std::nullptr_t" but for now clang
uses the unqualified name (which is ambiguous with possible user defined
name in the global namespace), so match that here.
Laying more foundation for full template name rebuilding - more complex
type printing benefits from an object to carry some state rather than
passing it around as parameters to every function.
This does add some extra superfluous whitespace (eg: "int *") intended
to make the Simplified Template Names work easier - this makes the
DIE-based names match more exactly the clang-generated names, so it's
easier to identify cases that don't generate matching names.
(arguably we could change clang to skip that whitespace or add some
fuzzy matching to accommodate differences in certain whitespace - but
this seemed easier and fairly low-impact)
DWARFDie::getDeclFile(...) previously only supported getting the DW_AT_decl_file if the DIE itself contained the DW_AT_decl_file attribute, or if the DIE had a DW_AT_abstract_origin that pointed to another DIE that had a DW_AT_decl_file. This patch allows the function to get the right attribute value if there is a DW_AT_specification that points to another DIE. We also test that if a DW_AT_abtract_origin or DW_AT_specification points to a DIE in another CU with a DW_FORM_ref_addr, that the right line table is used to extract the file index.
Full tests were added for the following cases:
- DIE has a DW_AT_decl_file attribute
- DIE has a DW_AT_abtract_origin that points to another die in the same CU
- DIE has a DW_AT_abtract_origin that points to another die in another CU
- DIE has a DW_AT_specification that points to another die in the same CU
- DIE has a DW_AT_specification that points to another die in another CU
Differential Revision: https://reviews.llvm.org/D108480
list for attributes that don't have the loclist class.
Summary: The overflow error occurs when we try to dump
location list for those attributes that do not have the
loclist class, like DW_AT_count and DW_AT_byte_size.
After re-reviewed the entire list, I sorted those
attributes into two parts, one for dumping location list
and one for dumping the location expression.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D105613
Originally committed as 04c203e310
Reverted in 768510632c due to the test
failing when encountering windows directory separators.
Fix the path separator platform issue with a FileCheck pattern {{[/\\]}}
Original commit message:
A followup to the feature added in 69da27c749
that added the optional "start file name" to match "start line" - but this
didn't work with Split DWARF because of the need for the decl file number
resolution code to refer back to the skeleton unit to find its .debug_line
contribution. So this patch adds the necessary infrastructure to track the
skeleton unit corresponding to a split full unit for the purpose of this
lookup.
A followup to the feature added in
69da27c749 that added the optional "start
file name" to match "start line" - but this didn't work with Split DWARF
because of the need for the decl file number resolution code to refer
back to the skeleton unit to find its .debug_line contribution. So this
patch adds the necessary infrastructure to track the skeleton unit
corresponding to a split full unit for the purpose of this lookup.
When DIE is extracted manually, the DieArray is empty. When dump is invoked on aforementioned DIE it tries to extract child, even if Dump options say otherwise. Resulting in crash.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99698
`AttributeSpec` does not contain values while `DWARFAttribute` already
does. Therefore one no longer needs to pass `uint64_t *OffsetPtr`.
Differential Revision: https://reviews.llvm.org/D98194
Since a function might have portions of its code coming from multiple
different files, "start line" is ambiguous (it can't just be resolved
relative to the file/line specified). Add start file to disambiguate it.
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
Summary:
Current implementation of DWARFDie::getName(DINameKind Kind) could
lead to double call to DWARFDie::find(DW_AT_name) in following
scenario:
getName(LinkageName);
getName(ShortName);
getName(LinkageName) calls find(DW_AT_name) if linkage name is not
found. Then, it is called again in getName(ShortName). This patch
alows to request LinkageName and ShortName separately
to avoid extra call to find(DW_AT_name).
It helps D74169 to parse clang debuginfo faster(~1%).
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D79173
Summary:
Change std::vector to SmallVector to prevent re-allocations and to
have small pre-allocated storage.
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D79123
Summary:
This patch is extracted from D74308.
It patches all usages of WithColor::error() and WithColor::warning
in DebugInfoDWARF library.
Depends on D74481
Reviewers: jhenderson, dblaikie, probinson, aprantl, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74635
The Version was used only to determine the size of an operand of
DW_OP_call_ref. The size was 4 for all versions apart from 2, but
the DW_OP_call_ref operation was introduced only in DWARF3. Thus,
the code may be simplified and using of Version may be eliminated.
Differential Revision: https://reviews.llvm.org/D73264
Now that DWARFv5 provides a way to identify DWARF expressions based on
form, rather than only by attribute - use it to always provide pretty
printing for any exprloc attribute, not only the attributes known to
contain expressions.
Summary:
With -gdwarf-5 local variable locations are emitted as DW_FORM_loclistx
form instead of the regular DW_FORM_sec_offset. Teach
DWARFDie::getLocations to understand the new format and use it in
llvm-symbolizer "FRAME" command.
Reviewers: pcc, jdoerfert
Subscribers: srhines, aprantl, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70756
Summary:
Currently these function return the raw content of the appropriate table
header, which means they are relative to the DW_AT_{loc,rng}list_base,
and one has to relocate them in order to do anything.
This changes the functions to perform the relocation themselves, which
seems more clearer, particularly as they are sitting right next to the
find{Rng,Loc}listFromOffset functions, but one *cannot* simply take the
result of these functions and take pass them there.
The only effect of this patch is to change what value is dumped for the
DW_AT_ranges attribute, which I think is for the better, as previously
the values appeared to point into thin air.
(The main reason I am looking at this is because I was trying to
implement equivalent functionality in lldb's DWARFUnit, and was stumped
by this behavior.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, llvm-commits, SouraVX
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71006
Summary:
This does exactly what it says on the box. The only small gotcha is the
section index computation for offset_pair entries, which can use either
the base address section, or the section from the offset_pair entry.
This is to support both the cases where the base address is relocated
(points to the base of the CU, typically), and the case where the base
address is a constant (typically zero) and relocations are on the
offsets themselves.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits, probinson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70540
The original commit message follows.
This patch adds support for debug_loclists.dwo section in llvm and llvm-dwarfdump.
Also Fixes PR43622, PR43623.
Reviewers: dblaikie, probinson, labath, aprantl, jini.susan.george
Differential Revision: https://reviews.llvm.org/D69462
This recommits 089c0f5814, which was
reverted due to failing tests on big endian machines. It includes a fix
which I believe (I don't have BE machine) should fix this issue. The fix
consists of correcting the invocation DWARFYAML::EmitDebugSections,
which was missing one (default) function arguments, and so didn't
actually force the little-endian mode.
The original commit message follows.
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
This reapplies c0f6ad7d1f with an
additional fix in test/DebugInfo/X86/constant-loclist.ll, which had a
slightly different output on windows targets. The test now accounts for
this difference.
The original commit message follows.
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
This only implements the non-dwo part, but loclistx is necessary to use
location lists in DWARFv5, so it's a precursor to that work - and
generally reduces relocations (only using one reloc, then
indexes/relative offsets for all location list references) in non-split
DWARF.
David Blaikie