Summary: This change enables all kind of carry out ISD opcodes to be selected according to the node divergence.
Reviewers: rampitec, arsenm, vpykhtin
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78091
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
This avoids more long lists of register classes that have to be updated
every time we add a new one. NFC.
Differential Revision: https://reviews.llvm.org/D78570
12994a70cf did this for 128-bit classes:
SGPR_128 only includes the real allocatable SGPRs, and SReg_128 adds
the additional non-allocatable TTMP registers. There's no point in
allocating SReg_128 vregs. This shrinks the size of the classes
regalloc needs to consider, which is usually good.
This patch extends it to all classes > 64 bits, for consistency.
Differential Revision: https://reviews.llvm.org/D78622
Add 96-bit, 160-bit and 256-bit AReg classes to match VReg and SReg.
NFC as far as I know, but it may avoid weird legalization problems.
Differential Revision: https://reviews.llvm.org/D78348
Ports the existing DAG combines, minus the simplify demanded bits
which seems to have no equivalent now. Without these, this isn't
particularly helpful in most of the IR sample cases.
Since 1725f28841, this should check
isFMADLegalForFAddFSub rather than the the plain isOperationLegal.
This would assert in a subset of cases due to an oddity in how FMAD is
selected. We will allow FMA formation pre-legalize, but not FMAD even
in cases where it would be valid.
The current hook requires passing in the root fadd/fsub. However, in
this distributed case, this would be far more complicated to pass in
the relevant operand. AMDGPU doesn't get any value from the node, and
only needs the type and is the only implementor, so I'm not sure why
we have this complexity. Just rename and expand the assert to avoid
the more complicated checks spread through the distribution logic.
The extracts from control flow intrinsics are already properly handled
by divergence analysis. The inline asm case isn't dead, but has also
never really worked correctly so leave it as-is for now.
Add a new llvm.amdgcn.ballot intrinsic modeled on the ballot function
in GLSL and other shader languages. It returns a bitfield containing the
result of its boolean argument in all active lanes, and zero in all
inactive lanes.
This is intended to replace the existing llvm.amdgcn.icmp and
llvm.amdgcn.fcmp intrinsics after a suitable transition period.
Use the new intrinsic in the atomic optimizer pass.
Differential Revision: https://reviews.llvm.org/D65088
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Remove the gap left between the stack pointer (s32) and frame pointer
(s34) now that the scratch wave offset is no longer a part of the
calling convention ABI.
Update llvm/docs/AMDGPUUsage.rst to reflect the change.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75657
Add the scratch wave offset to the scratch buffer descriptor (SRSrc) in
the entry function prologue. This allows us to removes the scratch wave
offset register from the calling convention ABI.
As part of this change, allow the use of an inline constant zero for the
SOffset of MUBUF instructions accessing the stack in entry functions
when a frame pointer is not requested/required. Entry functions with
calls still need to set up the calling convention ABI stack pointer
register, and reference it in order to address arguments of called
functions. The ABI stack pointer register remains unswizzled, but is now
wave-relative instead of queue-relative.
Non-entry functions also use an inline constant zero SOffset for
wave-relative scratch access, but continue to use the stack and frame
pointers as before. When the stack or frame pointer is converted to a
swizzled offset it is now scaled directly, as the scratch wave offset no
longer needs to be subtracted first.
Update llvm/docs/AMDGPUUsage.rst to reflect these changes to the calling
convention.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75138
This isn't really usable, and requires using the
-amdgpu-fixed-function-abi flag to work.
Assumes a uniform call target, and will hit a verifier error if the
call target ends up in a VGPR. Also doesn't attempt to do anything
sensible for the reported register/stack usage.
Summary:
When SI_INDIRECT_DST_V* pseudos has indexes in VGPR, they get expanded into the self-looped basic block that modifies EXEC in a loop.
To keep EXEC consistent it is stored before and then re-stored after the pseudo expansion result.
%95:vreg_512 = SI_INDIRECT_DST_V16 %93:vreg_512(tied-def 0), %94:sreg_32, 0, killed %1500:vgpr_32
results to
s_mov_b64 s[6:7], exec
BB0_16:
v_readfirstlane_b32 s8, v28
v_cmp_eq_u32_e32 vcc, s8, v28
s_and_saveexec_b64 vcc, vcc
s_set_gpr_idx_on s8, gpr_idx(DST)
v_mov_b32_e32 v6, v25
s_set_gpr_idx_off
s_xor_b64 exec, exec, vcc
s_cbranch_execnz BB0_16
; %bb.17:
s_mov_b64 exec, s[6:7]
The bug appeared in case this expansion occurs in the ELSE block of the CF.
Originally
%110:vreg_512 = SI_INDIRECT_DST_V16 %103:vreg_512(tied-def 0), %85:vgpr_32, 0, %107:vgpr_32,
%112:sreg_64 = SI_ELSE %108:sreg_64, %bb.19, 0, implicit-def dead $exec, implicit-def dead $scc, implicit $exec
expanded to
****************** <== here exec has "THEN" context
s_mov_b64 s[6:7], exec
BB0_16:
v_readfirstlane_b32 s8, v28
v_cmp_eq_u32_e32 vcc, s8, v28
s_and_saveexec_b64 vcc, vcc
s_set_gpr_idx_on s8, gpr_idx(DST)
v_mov_b32_e32 v6, v25
s_set_gpr_idx_off
s_xor_b64 exec, exec, vcc
s_cbranch_execnz BB0_16
; %bb.17:
s_or_saveexec_b64 s[4:5], s[4:5] <-- exec mask is restored for "ELSE" but immediately overwritten.
s_mov_b64 exec, s[6:7]
The rest of the "ELSE" block is executed not by the workitems which constitute the "else mask" but by those which constitute "then mask"
SILowerControlFlow::emitElse always considers the basic block begin() as an insertion point for s_or_saveexec.
Proposed fix: The SI_INDIRECT_DST_V* procedure should split the reminder block to create landing pad for the EXEC restoration.
Reviewers: rampitec, vpykhtin, nhaehnle
Reviewed By: vpykhtin
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75472
If SimplifyDemandedBits succeeds in simplifying the byte src, add the CVT_F32_UBYTE node back to the worklist as we might be able to simplify further.
Yet another step towards removing SelectionDAG::GetDemandedBits.
This is part of the work to remove SelectionDAG::GetDemandedBits and just use SimplifyMultipleUseDemandedBits.
Recent experiments raised some v_cvt_f32_ubyte*_e32 regressions, so I've added some additional abilities to performCvtF32UByteNCombine to help unpack byte data more aggressively.
We still don't remove all OR(SHL,SRL) patterns as some of the regenerated nodes don't get combined again, but we are getting closer.
Differential Revision: https://reviews.llvm.org/D74786
Also greatly improve i64 lowering. LegalizeIntegerTypes does the
correct narrowing if i64 isn't legal. Just workaround this for
SelectionDAG by making i64 legal and splitting in the patterns.
This is apparently worse than 1-byte alignment. This does not attempt
to decompose 2-byte aligned wide stores, but will stop trying to
produce them.
Also fix bug in LoadStoreVectorizer which was decreasing the alignment
and vectorizing stack accesses. It was assuming a stack object was an
alloca that could have its base alignment changed, which is not true
if the pointer is derived from a function argument.
These are generated and do not need to have the same values.
We are defining separate subregs for R600 and GCN but then
using AMDGPU subregs on R600.
Differential Revision: https://reviews.llvm.org/D74248
Based on D72931
This adds a new feature called A16 which is enabled for gfx10.
gfx9 keeps the R128A16 feature so it can share all the instruction encodings
with gfx7/8.
Differential Revision: https://reviews.llvm.org/D73956
Summary:
The accuracy limit to use rcp is adjusted to 1.0 ulp from 2.5 ulp.
Also, afn instead of arcp is used to allow inaccurate rcp to be used.
Reviewers:
arsenm
Differential Revision: https://reviews.llvm.org/D73588
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
We are using countPopulation on a LaneBitmask to determine
a number of registers it covers. This is the assumption which
does not necessarily need to be true. It is not changed but
factored into a single call SIRegisterInfo::getNumCoveredRegs().
Some other places are cleaned up with respect to assumptions
about subreg indexes values and tablegen behavior.
Differential Revision: https://reviews.llvm.org/D74177
scalar_to_vector takes only one argument, not two.
The a16 tests now also check the packing of coordinates into registers
Differential Revision: https://reviews.llvm.org/D73482
This should lower the amount of used registers for gfx9.
I updated some of the changed tests with the update script because
changing them by hand is tedious.
Differential Revision: https://reviews.llvm.org/D73884
This was incorrectly rounding up to the next power of 2. v4f32 was
rounding up to v8f32, which was just wrong. There are also v3i16/v3f16
available in MVT, so we don't even need to round the f16 cases
anymore. Additionally, this field is really an EVT so we don't even
need to consider this.
Also switch some asserts to return invalid. We should have an IR
verifier for these intrinsic return types, but for now it's better to
not assert on IR that passes the verifier.
This should also probably be fixed to consider that dmask is really
eliminating some of the loaded components.
Prepare to accurately track the future denormal-fp-math attribute
changes. The way to actually set these separately is not wired in yet.
This is just a mechanical change, and mostly still assumes the input
and output mode match. This should be refined for some cases. For
example, fcanonicalize lowering should use the flushing variant if
either input or output flushing is enabled
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
There's not much value to this separate node from the intrinsic. Make
the operand structure the same as the intrinsic, so we can reuse the
same pattern for GlobalISel.
Manually select this is as a tablegen workraound. Both SelectionDAG
and GlobalISel end up misplacing the copy to m0 when both instructions
in the output need it. Neither considers that both output instructions
depend on m0. I don't know of any other pattern we need to handle this
case, so it's less effort to just workaround this for now.
Summary:
RCP has the accuracy limit. If FDIV fpmath require high accuracy rcp may not
meet the requirement. However, in DAG lowering, fpmath information gets lost,
and thus we may generate either inaccurate rcp related computation or slow code
for fdiv.
In patch implements fdiv optimizations in the AMDGPUCodeGenPrepare, which could
exactly know !fpmath.
FastUnsafeRcpLegal: We determine whether it is legal to use rcp based on
unsafe-fp-math, fast math flags, denormals and fpmath
accuracy request.
RCP Optimizations:
1/x -> rcp(x) when fast unsafe rcp is legal or fpmath >= 2.5ULP with
denormals flushed.
a/b -> a*rcp(b) when fast unsafe rcp is legal.
Use fdiv.fast:
a/b -> fdiv.fast(a, b) when RCP optimization is not performed and
fpmath >= 2.5ULP with denormals flushed.
1/x -> fdiv.fast(1,x) when RCP optimization is not performed and
fpmath >= 2.5ULP with denormals.
Reviewers:
arsenm
Differential Revision:
https://reviews.llvm.org/D71293
This using the wrong result register, and dropping the result entirely
for v2f16. This would fail to select on the scalar case. I believe it
was also mishandling packed/unpacked subtargets.
a785209bc2 switched to using a pseudos instead of manually tying
operands on the regular instruction. The VGPR indexing mode path
should have the same problems that change attempted to avoid, so these
should use the same strategy.
Use a single pseudo for the VGPR indexing mode and movreld paths, and
expand it based on the subtarget later. These have essentially the
same constraints, reading the index from m0.
Switch from using an offset to the subregister index directly, instead
of computing an offset and re-adding it back. Also add missing pseudos
for existing register class sizes.
Currently the lowering for i16 image coordinates asserts on gfx10. I'm
somewhat confused by this though. The feature is missing from the
gfx10 feature lists, but the a16 bit appears to be present in the
manual for MIMG instructions.
This case can be handled as a regular selection pattern, so move it
out of the weird post-isel folding code which doesn't have an exactly
equivalent place in GlobalISel.
I think it doesn't make much sense to do this optimization here
though, and it would be more useful in instcombine. There's not really
any new information that will be gained during lowering since these
inputs were known from the beginning.
I'm mildly worried about potentially reordering exp/exp_done with
IntrWriteMem on the intrinsic.
Requires hacking out the illegal type on SI, so manually select that
case during lowering.
The 16 bank LDS case is complicated due to using multiple
instructions. If I attempt to write a pattern for it, the generated
selector incorrectly places the copy to m0 after the first
instruction, so that needs to be separately addressed.
Also fix not gluing the copy to m0 to the second operation in the
second half of the 16 bank lowering.
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
The existing test only covered one case for r600. The use of
mul_legacy also looks suspicious to me, but leave it for now. The
patterns are also not making use of source modifiers.
Summary:
- CF users won't be non-instruction values. Skip them to save the
compilation time. It's especially true when there are multiple
functions in that module, where, says, a constant may be used in most
functions. The current CF user tracing adds significant overhead.
Reviewers: alex-t, rampitec
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72174
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).
There's no major functionality change, except for targets that never
implemented this check.
This LLVM attribute was originally added in
d9699bc7bd (2015).
Reviewers: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D72118
This allows us to clean up some places that were peeking through
the MERGE_VALUES node after the call. By returning the SDValues
directly, we can clean that up.
Unfortunately, there are several call sites in AMDGPU that wanted
the MERGE_VALUES and now need to create their own.
Summary:
The only useful information the UndefValue conveys is the address space,
which MachinePointerInfo can represent directly without referring to an
IR value.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71838
This reverts commit 69fcfb7d35.
As shown in the test I attached to this commit, the change I reverted
causes a problem with "zext(cc1) - zext(cc2)". It commuted
the operands to the sub and used different logic to select the addc/subc
instruction:
sub zext (setcc), x => addcarry 0, x, setcc
sub sext (setcc), x => subcarry 0, x, setcc
... but that is bogus. I believe it is not possible to fold those commuted
patterns into any form of addcarry or subcarry. It may have worked as
intended before "AMDGPU: Change boolean content type to 0 or 1" because
the setcc was considered to be -1 rather than 1.
Differential Revision: https://reviews.llvm.org/D70978
Change-Id: If2139421aa6c935cbd1d925af58fe4a4aa9e8f43
Start moving towards treating this as a property of the calling
convention, and not the subtarget. The default denormal mode should
not be part of the subtarget, and be moved into a separate function
attribute.
This patch is still NFC. The denormal mode remains as a subtarget
feature for now, but make the necessary changes to switch to using an
attribute.
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.
AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
The usage of target boolean checks is overly inflexible, since sext
and zext of a compare are equally cheap. The choice is arbitrary, but
using 0/1 to some degree is the choice of lower resistance since
that's what most targets use. This enables a few combines that don't
bother to support ZeroOrNegativeOneBooleanContent.
For AMDGPU this depends on whether denormals are enabled in the
default FP mode for the function. Currently this is treated as a
subtarget feature, so FMAD is selectively legal based on that. I want
to move this out of the subtarget features so this can be controlled
with a denormal mode attribute. Additionally, this will allow folding
based on a future ftz fast math flag.
Custom lower this to a target instruction with the merge operands. I
think it might be better to directly select this and emit a
REG_SEQUENCE, but this would be more work since it would require
splitting the tablegen patterns for these cases from the other
atomics.
Mostly use SReg_32 instead of SReg_32_XM0 for arbitrary values. This
will allow the register coalescer to do a better job eliminating
copies to m0.
For GlobalISel, as a terrible hack, use SGPR_32 for things that should
use SCC until booleans are solved.
llvm-svn: 375267
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
SGPR_128 only includes the real allocatable SGPRs, and SReg_128 adds
the additional non-allocatable TTMP registers. There's no point in
allocating SReg_128 vregs. This shrinks the size of the classes
regalloc needs to consider, which is usually good.
llvm-svn: 374284
Summary:
Without offsets on the MachineMemOperands (MMOs),
MachineInstr::mayAlias() will return true for all reads and writes to the
same resource descriptor. This leads to O(N^2) complexity in the MachineScheduler
when analyzing dependencies of buffer loads and stores. It also limits
the SILoadStoreOptimizer from merging more instructions.
This patch reduces the compile time of one pathological compute shader
from 12 seconds to 1 second.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65097
llvm-svn: 374087
Summary:
Extend cachepolicy operand in the new VMEM buffer intrinsics
to supply information whether the buffer data is swizzled.
Also, propagate this information to MIR.
Intrinsics updated:
int_amdgcn_raw_buffer_load
int_amdgcn_raw_buffer_load_format
int_amdgcn_raw_buffer_store
int_amdgcn_raw_buffer_store_format
int_amdgcn_raw_tbuffer_load
int_amdgcn_raw_tbuffer_store
int_amdgcn_struct_buffer_load
int_amdgcn_struct_buffer_load_format
int_amdgcn_struct_buffer_store
int_amdgcn_struct_buffer_store_format
int_amdgcn_struct_tbuffer_load
int_amdgcn_struct_tbuffer_store
Furthermore, disable merging of VMEM buffer instructions
in SI Load/Store optimizer, if the "swizzled" bit on the instruction
is on.
The default value of the bit is 0, meaning that data in buffer
is linear and buffer instructions can be merged.
There is no difference in the generated code with this commit.
However, in the future it will be expected that front-ends
use buffer intrinsics with correct "swizzled" bit set.
Reviewers: arsenm, nhaehnle, tpr
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, arphaman, jfb, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68200
llvm-svn: 373491
Replace with the MachineFunction. X86 is the only user, and only uses
it for the function. This removes one obstacle from using this in
GlobalISel. The other is the more tolerable EVT argument.
The X86 use of the function seems questionable to me. It checks hasFP,
before frame lowering.
llvm-svn: 373292
Rename old function to explicitly show that it cares only about alignment.
The new allowsMemoryAccess call the function related to alignment by default
and can be overridden by target to inform whether the memory access is legal or
not.
Differential Revision: https://reviews.llvm.org/D67121
llvm-svn: 372935
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
There's still a lot more to do, but this handles decomposing due to
alignment. I've gotten it to the point where nothing crashes or
infinite loops the legalizer.
llvm-svn: 371533
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
Summary:
D61491 caused us to use relocs when they're not strictly necessary, to
refer to symbols in the text section. This is a pessimization and it's a
problem for some loaders that don't support relocs yet.
Reviewers: nhaehnle, arsenm, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65813
llvm-svn: 370667
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
AMDGPU has some buffer intrinsics which theoretically could use
this. Some of the generated tables include the 3 and 4 element vector
versions of these rounded to 64-bits, which is ambiguous. Add these to
help the table disambiguate these.
Assertion change is for the path odd sized vectors now take for R600.
v3i16 is widened to v4i16, which then needs to be promoted to v4i32.
llvm-svn: 369038
This was switching to use a format store for a non-format store for
f16 types. Also fixes i16/f16 stores on targets without legal f16.
The corresponding loads also need to be fixed.
llvm-svn: 367872
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
Summary:
If isel is presented with <2 x half> vectors then it will correctly select
v_pk_fma style instructions.
If isel is presented with e.g. <4 x half> vectors it will scalarize, unlike for
other instruction types (such as fadd, fmul etc.)
Added extra support to enable this. Updated one of the tests to include a test
for this (as well as extending the test to GFX9)
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65325
Change-Id: I50a4577a3f8223fb53992af3b7d26121f65b71ee
llvm-svn: 367206
This should now handle everything except structs passed as multiple
registers.
I think most of the packing logic should be handled by
handleAssignments, but I'm unclear on what the contract is for
multiple registers. This is copying how x86 handles this.
This does change the behavior of the test_sgpr_alignment0 amdgpu_vs
test. I don't think shader arguments should try to follow the
alignment, and registers need to be repacked. I also don't think it
matters, since I think the pointers are packed to the beginning of the
argument list anyway.
llvm-svn: 366582
This is the more natural lowering, and presents more opportunities to
reduce 64-bit ops to 32-bit.
This should also help avoid issues graphics shaders have had with
64-bit values, and simplify argument lowering in globalisel.
llvm-svn: 366578
When it is AReg_1024 this results in unnecessary copying into
AGPRs of a 32 element vectors even though they are not intended
for an mfma instruction.
Differential Revision: https://reviews.llvm.org/D64815
llvm-svn: 366252
Insert these during codegenprepare.
This works around a DAG issue where generic combines eliminate the and
asserting the high bits are zero, which then exposes an unknown read
source to the mul combine. It doesn't worth the hassle of trying to
insert an AssertZext or something to try to deal with it.
llvm-svn: 366094
These should really use v32f32, but were defined as v32i32
due to the lack of the v32f32 type.
Differential Revision: https://reviews.llvm.org/D64667
llvm-svn: 365972
Before 2018, mesa used to use byval interchangably with inreg, which
didn't really make sense. Fix tests still using it to avoid breaking
in a future commit.
llvm-svn: 365953
Function return instruction lowering, currently uses the fixed register pair s[30:31] for holding
the return address. It can be any SGPR pair other than the CSRs. Created an SGPR pair sub-register class
exclusive of the CSRs, and used this regclass while lowering the return instruction.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D63924
llvm-svn: 365512
Make the FP register callee saved.
This is tricky because now the FP needs to be spilled in the prolog
relative to the incoming SP register, rather than the frame register
used throughout the rest of the function. I don't like how this
bypassess the standard mechanism for CSR spills just to get the
correct insert point. I may look for a better solution, since all CSR
VGPRs may also need to have all lanes activated. Another option might
be to make getFrameIndexReference change the base register if the
frame index is a CSR, and then try to figure out the right insertion
point in emitProlog.
If there is a free VGPR lane available for SGPR spilling, try to use
it for the FP. If that would require intrtoducing a new VGPR spill,
try to use a free call clobbered SGPR. Only fallback to introducing a
new VGPR spill as a last resort.
This also doesn't attempt to handle SGPR spilling with scalar stores.
llvm-svn: 365372
Summary:
Since the changes to introduce vec3 and vec5, INSERT_VECTOR for these
sizes has been marked "expand", which made LegalizeDAG lower it to loads
and stores via a stack slot. The code got optimized a bit later, but the
now-unused stack slot was never deleted.
This commit avoids that problem by custom lowering INSERT_SUBVECTOR into
an EXTRACT_VECTOR_ELT and INSERT_VECTOR_ELT for each element in the
subvector to insert.
V2: Addressed review comments re test.
Differential Revision: https://reviews.llvm.org/D63160
Change-Id: I9e3c13e36f68cfa3431bb9814851cc1f673274e1
llvm-svn: 365148
Ordinarily it is lowered as a build_vector of each extract_vector_elt,
which in turn get lowered to bitcasts and bit shifts. Very little
understand the lowered extract pattern, resulting in much worse
code. We treat concat_vectors of v2i16 as legal, so prefer that.
llvm-svn: 364959
Summary:
ds_ordered_count can now simultaneously operate on up to 4 dwords
in a single instruction, which are taken from (and returned to)
lanes 0..3 of a single VGPR.
Change-Id: I19b6e7b0732b617c10a779a7f9c0303eec7dd276
Reviewers: mareko, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63716
llvm-svn: 364815
Summary:
The symbols use the processor-specific SHN_AMDGPU_LDS section index
introduced with a previous change. The linker is then expected to resolve
relocations, which are also emitted.
Initially disabled for HSA and PAL environments until they have caught up
in terms of linker and runtime loader.
Some notes:
- The llvm.amdgcn.groupstaticsize intrinsics can no longer be lowered
to a constant at compile times, which means some tests can no longer
be applied.
The current "solution" is a terrible hack, but the intrinsic isn't
used by Mesa, so we can keep it for now.
- We no longer know the full LDS size per kernel at compile time, which
means that we can no longer generate a relevant error message at
compile time. It would be possible to add a check for the size of
individual variables, but ultimately the linker will have to perform
the final check.
Change-Id: If66dbf33fccfbf3609aefefa2558ac0850d42275
Reviewers: arsenm, rampitec, t-tye, b-sumner, jsjodin
Subscribers: qcolombet, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61494
llvm-svn: 364297
Every called function could possibly need this to calculate the
absolute address of stack objectst, and this avoids inserting a copy
around every call site in the kernel. It's also somewhat cleaner to
keep this in a callee saved SGPR.
llvm-svn: 363990
This is incomplete, and ideally these would all be removed, but it's
better to localize them to the subtarget first with comments about
what they're for.
llvm-svn: 363902
This reapplies r363678, using the correct chain for the CopyToReg for
v0. glueCopyToM0 counterintuitively changes the operands of the
original node.
llvm-svn: 363870
Summary:
Instead of encoding a high-word of 0 using a fake TargetGlobalAddress,
just use a literal target constant. This simplifies some subsequent changes.
The generated assembly is now more explicit about the kind of relocation
that is to be used.
Change-Id: I066835202d23b5941fa7a358eb4b89e9b71ab6f8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61491
llvm-svn: 363516
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
"Divergence driven ISel. Assign register class for cross block values
according to the divergence."
that discovered the design flaw leading to several issues that
required to be solved before.
This change reverts AMDGPU specific changes and keeps common part
unaffected.
llvm-svn: 362749
This forced the caller to be aware of this, which is an ugly ABI
feature.
Partially reverts r295877. The original reasons for doing this are
mostly fixed. Alloca is now in a non-0 address space, so it should be
OK to have 0 as a valid pointer. Since we treat the absolute address
as the pointer value, this part only really needed to apply to
kernels.
Since r357093, we avoid the need to increment/decrement the offset
register in more cases, and since r354816 the scavenger can fail
without spilling, so it's less critical that we try to avoid an offset
that fits in the MUBUF offset.
Restrict to callable functions for now to split this into 2 steps to
limit thte number of test updates and in case anything breaks.
llvm-svn: 362665
Since the beginning, the offset of a frame index has been consistently
interpreted backwards. It was treating it as an offset from the
scratch wave offset register as a frame register. The correct
interpretation is the offset from the SP on entry to the function,
before the prolog. Frame index elimination then should select either
SP or another register as an FP.
Treat the scratch wave offset on kernel entry as the pre-incremented
SP. Rely more heavily on the standard hasFP and frame pointer
elimination logic, and clean up the private reservation code. This
saves a copy in most callee functions.
The kernel prolog emission code is still kind of a mess relying on
checking the uses of physical registers, which I would prefer to
eliminate.
Currently selection directly emits MUBUF instructions, which require
using a reference to some register. Use the register chosen for SP,
and then ignore this later. This should probably be cleaned up to use
pseudos that don't refer to any specific base register until frame
index elimination.
Add a workaround for shaders using large numbers of SGPRs. I'm not
sure these cases were ever working correctly, since as far as I can
tell the logic for figuring out which SGPR is the scratch wave offset
doesn't match up with the shader input initialization in the shader
programming guide.
llvm-svn: 362661
For some reason multiple places need to do this, and the variant the
loop unroller and inliner use was not handling it.
Also, introduce a new wrapper to be slightly more precise, since on
AMDGPU some addrspacecasts are free, but not no-ops.
llvm-svn: 362436
Summary:
- There's a regression due to the cross-block RC assignment. Use the
proper way to derive the output register RC in inline asm.
Reviewers: rampitec, alex-t
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, dstuttard, tpr, t-tye, eraman, hiraditya, llvm-commits, yaxunl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62537
llvm-svn: 361868
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
This commit was reverted because of the build failure.
The reason was mlformed patch.
Build failure fixed.
llvm-svn: 361741
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
llvm-svn: 361644
We were assuming a much larger possible per-wave visible stack
allocation than is possible:
faa3ae5138/src/core/runtime/amd_gpu_agent.cpp (L70)
Based on this, we can assume the high 15 bits of a frame index or sret
are 0. The frame index value is the per-lane offset, so the maximum
frame index value is MAX_WAVE_SCRATCH / wavesize.
Remove the corresponding subtarget feature and option that made
this configurable.
llvm-svn: 361541
We don't have FP exception limits in the IR constant folder for the binops (apart from strict ops),
so it does not make sense to have them here in the DAG either. Nothing else in the backend tries
to preserve exceptions (again outside of strict ops), so I don't see how this could have ever
worked for real code that cares about FP exceptions.
There are still cases (examples: unary opcodes in SDAG, FMA in IR) where we are trying (at least
partially) to preserve exceptions without even asking if the target supports FP exceptions. Those
should be corrected in subsequent patches.
Real support for FP exceptions requires several changes to handle the constrained/strict FP ops.
Differential Revision: https://reviews.llvm.org/D61331
llvm-svn: 359791
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Since this can be set with s_setreg*, it should not be a subtarget
property. Set a default based on the calling convention, and Introduce
a new amdgpu-dx10-clamp attribute to override this if desired.
Also introduce a new amdgpu-ieee attribute to match.
The values need to match to allow inlining. I think it is OK for the
caller's dx10-clamp attribute to override the callee, but there
doesn't appear to be the infrastructure to do this currently without
definining the attribute in the generic Attributes.td.
Eventually the calling convention lowering will need to insert a mode
switch somewhere for these.
llvm-svn: 357302
Some image ops return three or five dwords. Previously, we modeled that
with a 4 or 8 dword register class. The register allocator could
cleverly spot that some subregs were dead and allocate something else
there, but that caused the de-optimization that waitcnt insertion would
think that the result was used immediately.
This commit allows such an image op to have a result with a three or
five dword result, avoiding the above de-optimization.
Differential Revision: https://reviews.llvm.org/D58905
Change-Id: I3651211bbd7ed22721ee7b9fefd7bcc60a809d8b
llvm-svn: 356757
Now we have vec3 MVTs, this commit implements dwordx3 variants of the
buffer intrinsics.
On gfx6, a dwordx3 buffer load intrinsic is implemented as a dwordx4
instruction, and a dwordx3 buffer store intrinsic is not supported.
We need to support the dwordx3 load intrinsic because it is generated by
subtarget-unaware code in InstCombine.
Differential Revision: https://reviews.llvm.org/D58904
Change-Id: I016729d8557b98a52f529638ae97c340a5922a4e
llvm-svn: 356755
They are not used by anything yet, but a subsequent commit will start
using them for image ops that return 5 dwords.
Differential Revision: https://reviews.llvm.org/D58903
Change-Id: I63e1904081e39a6d66e4eb96d51df25ad399d271
llvm-svn: 356735
Added support for dwordx3 for most load/store types, but not DS, and not
intrinsics yet.
SI (gfx6) does not have dwordx3 instructions, so they are not enabled
there.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58902
Change-Id: I913ef54f1433a7149da8d72f4af54dbb13436bd9
llvm-svn: 356659
Summary:
If an MIMG instruction has managed to get through to adjustWritemask in isel but
has no uses (and doesn't enable TFC) then prevent an assertion by not attempting
to adjust the writemask.
The instruction will be removed anyway.
Change-Id: I9a5dba6bafe1f35ac99c1b73df390936e2ac27a7
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58964
llvm-svn: 356540
I found this really weird WWM-related case whereby through the WWM
transformations our isel lowering was trying to promote 2 min's into a
min3 for the i8 type, which our hardware doesn't support.
The new min3_i8.ll test case would previously spew the error:
PromoteIntegerResult #0: t69: i8 = SMIN3 t70, Constant:i8<0>, t68
Before the simple fix to our isel lowering to not do it for i8 MVT's.
Differential Revision: https://reviews.llvm.org/D59543
llvm-svn: 356464
This commit allows v_cndmask_b32_e64 with abs, neg source
modifiers on src0, src1 to be assembled and disassembled.
This does appear to be allowed, even though they are floating point
modifiers and the operand type is b32.
To do this, I added src0_modifiers and src1_modifiers to the
MachineInstr, which involved fixing up several places in codegen and mir
tests.
Differential Revision: https://reviews.llvm.org/D59191
Change-Id: I69bf4a8c73ebc65744f6110bb8fc4e937d79fbea
llvm-svn: 356398
Add an experimental buffer fat pointer address space that is currently
unhandled in the backend. This commit reserves address space 7 as a
non-integral pointer repsenting the 160-bit fat pointer (128-bit buffer
descriptor + 32-bit offset) that is heavily used in graphics workloads
using the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D58957
llvm-svn: 356373
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.
Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.
llvm-svn: 356215
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
This avoids breaking possible value dependencies when sorting loads by
offset.
AMDGPU has some load instructions that write into the high or low bits
of the destination register, and have a tied input for the other input
bits. These can easily have the same base pointer, but be a swizzle so
the high address load needs to come first. This was inserting glue
forcing the opposite ordering, producing a cycle the InstrEmitter
would assert on. It may be potentially expensive to look for the
dependency between the other loads, so just skip any where this could
happen.
Fixes bug 40936 by reverting r351379, which added a hacky attempt to
fix this by adding chains in this case, which I think was just working
around broken glue before the InstrEmitter. The core of the patch is
re-implementing the fix for that problem.
llvm-svn: 355728
SITargetLowering::reassociateScalarOps() does not touch constants
so that DAGCombiner::ReassociateOps() does not revert the combine.
However a global address is not a ConstantSDNode.
Switched to the method used by DAGCombiner::ReassociateOps() itself
to detect constants.
Differential Revision: https://reviews.llvm.org/D58695
llvm-svn: 354926
Reassociate adds to collect scalar operands in a single
instruction when possible. That will result in a scalar
add followed by vector instead of two vector adds, thus
better utilizing SALU.
Differential Revision: https://reviews.llvm.org/D58220
llvm-svn: 354066
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Ensure the XOR in the waterfall loop for indirect addressing is considered a terminator.
Differential Revision: https://reviews.llvm.org/D57703
llvm-svn: 353207
Summary:
Incorrect code was generated when lowering insertelement operations
for vectors with 8 or 16 bit elements. The value being inserted was
not adjusted for the position of the element within the 32 bit word
and so only the low element within each 32 bit word could receive
the intended value.
Fixed by simply replicating the value to each element of a
congruent vector before the mask and or operation used to
update the intended element.
A number of affected LIT tests have been updated appropriately.
before the mask & or into the intended
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: llvm-commits, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57588
llvm-svn: 352885
Since these pass the pointer in m0 unlike other DS instructions, these
need to worry about whether the address is uniform or not. This
assumes the address is dynamically uniform, and just uses
readfirstlane to get a copy into an SGPR.
I don't know if these have the same 16-bit add for the addressing mode
offset problem on SI or not, but I've just assumed they do.
Also includes some misc. changes to avoid test differences between the
LDS and GDS versions.
llvm-svn: 352422
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
For these loads that write to the HI part of a register, we should chain them to the op that writes to the LO part
of the register to maintain the appropriate order.
Reviewers:
rampitec, arsenm
Differential Revision:
https://reviews.llvm.org/D56454
llvm-svn: 351379
Summary:
This allows moving the condition from the intrinsic to the standard ICmp
opcode, so that LLVM can do simplifications on it. The icmp.i1 intrinsic
is an identity for retrieving the SGPR mask.
And we can also get the mask from and i1, or i1, xor i1.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52060
llvm-svn: 351150
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
This re-submit of the change also includes a slight modification in
SIISelLowering.cpp to work-around a compiler bug for the powerpc_le
platform that caused a buildbot failure on a previous submission.
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
Work around for ppcle compiler bug
Change-Id: Ie284cf24b2271215be1b9dc95b485fd15000e32b
llvm-svn: 351054
This removes check for single use from general ShrinkDemandedConstant
to the BE because of the AArch64 regression after D56289/rL350475.
After several hours of experiments I did not come up with a testcase
failing on any other targets if check is not performed.
Moreover, direct call to ShrinkDemandedConstant is not really needed
and superceed by SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D56406
llvm-svn: 350684
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 348050
Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
My change svn-id: 347871 caused a buildbot failure due to an unused
variable def (used in an assert).
Change-Id: Ia882d18bb6fa79b4d7bbfda422b9ea5d23eab336
llvm-svn: 347876
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
This allows to avoid scratch use or indirect VGPR addressing for
small vectors.
Differential Revision: https://reviews.llvm.org/D54606
llvm-svn: 347231
An extractelement with non-constant index will be lowered either to
scratch or movrel loop in most cases. This patch converts such
instruction into a set of selects if vector size is not too big.
Differential Revision: https://reviews.llvm.org/D54351
llvm-svn: 346800
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
UBSan detected an error in our ISelLowering that is exposed only when
you have a dmask == 0x1. Fix this by adding in an explicit check to
ensure we don't do the UBSan detected shl << 32.
llvm-svn: 345962
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
Our a16 support was only enabled for sample/gather and buffer
load/store, but not for image load/store operations (which take an i16
as the pixel index rather than a half).
Fix our isel lowering and add test cases to prove it out.
Differential Revision: https://reviews.llvm.org/D53750
llvm-svn: 345710
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
Summary:
To workaround a hardware issue in the (base + offset) calculation
when base is negative. The impact on code quality should be limited
since SILoadStoreOptimizer still runs afterwards and is able to
combine loads/stores based on known sign information.
This fixes visible corruption in Hitman on SI (easily reproducible
by running benchmark mode).
Change-Id: Ia178d207a5e2ac38ae7cd98b532ea2ae74704e5f
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99923
Reviewers: arsenm, mareko
Subscribers: jholewinski, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53160
llvm-svn: 344698
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
llvm-svn: 344696
The isAmdCodeObjectV2 is a misleading name which actually checks whether the os
is amdhsa or mesa.
Also add a test to make sure we do not generate old kernel header for code
object v3.
Differential Revision: https://reviews.llvm.org/D52897
llvm-svn: 343813
Summary:
The new buffer/tbuffer intrinsics handle an out-of-range immediate
offset by moving/adding offset&-4096 to a vgpr, leaving an in-range
immediate offset, with a chance of the move/add being CSEd for similar
loads/stores.
However it turns out that a negative offset in a vgpr is illegal, even
if adding the immediate offset makes it legal again.
Therefore, this commit disables the offset&-4096 thing if the offset is
negative.
Differential Revision: https://reviews.llvm.org/D52683
Change-Id: Ie02f0a74f240a138dc2a29d17cfbd9e350e4ed13
llvm-svn: 343672
If the alignment is at least 4, this should report true.
Something still seems off with how < 4-byte types are
handled here though.
Fixing this seems to change how some combines get
to where they get, but somehow isn't changing the net
result.
llvm-svn: 342879
Summary:
GFX9 and above support sin/cos instructions with a greater range and thus don't
require a fract instruction prior to invocation.
Added a subtarget feature to reflect this and added code to take advantage of
expanded range on GFX9+
Also updated the tests to check correct behaviour
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51933
Change-Id: I1c1f1d3726a5ae32116646ca5cfa1ab4ef69e5b0
llvm-svn: 342222
alex-t