On some architectures such as Arm and X86 the encoding for a nop may
change depending on the subtarget in operation at the time of
encoding. This change replaces the per module MCSubtargetInfo retained
by the targets AsmBackend in favour of passing through the local
MCSubtargetInfo in operation at the time.
On Arm using the architectural NOP instruction can have a performance
benefit on some implementations.
For Arm I've deleted the copy of the AsmBackend's MCSubtargetInfo to
limit the chances of this causing problems in the future. I've not
done this for other targets such as X86 as there is more frequent use
of the MCSubtargetInfo and it looks to be for stable properties that
we would not expect to vary per function.
This change required threading STI through MCNopsFragment and
MCBoundaryAlignFragment.
I've attempted to take into account the in tree experimental backends.
Differential Revision: https://reviews.llvm.org/D45962
In preparation for passing the MCSubtargetInfo (STI) through to writeNops
so that it can use the STI in operation at the time, we need to record the
STI in operation when a MCAlignFragment may write nops as padding. The
STI is currently unused, a further patch will pass it through to
writeNops.
There are many places that can create an MCAlignFragment, in most cases
we can find out the STI in operation at the time. In a few places this
isn't possible as we are in initialisation or finalisation, or are
emitting constant pools. When possible I've tried to find the most
appropriate existing fragment to obtain the STI from, when none is
available use the per module STI.
For constant pools we don't actually need to use EmitCodeAlign as the
constant pools are data anyway so falling through into it via an
executable NOP is no better than falling through into data padding.
This is a prerequisite for D45962 which uses the STI to emit the
appropriate NOP for the STI. Which can differ per fragment.
Note that involves an interface change to InitSections. It is now
called initSections and requires a SubtargetInfo as a parameter.
Differential Revision: https://reviews.llvm.org/D45961
Similar to D108842 and D108844.
__has_builtin(builtin_mul_overflow) returns true for 32b MIPS targets,
but Clang is deferring to compiler RT when encountering long long types.
This breaks MIPS malta_defconfig builds of the Linux kernel that are
using __builtin_mul_overflow with these types for these targets.
If the semantics of __has_builtin mean "the compiler resolves these,
always" then we shouldn't conditionally emit a libcall.
This will still need to be worked around in the Linux kernel in order to
continue to support malta_defconfig builds of the Linux kernel for this
target with older releases of clang.
Link: https://bugs.llvm.org/show_bug.cgi?id=28629
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D108926
__has_builtin(__builtin_mul_overflow) returns true for 32b MIPS targets,
but Clang is deferring to compiler RT when encountering `long long`
types. This breaks sanitizer builds of the Linux kernel that are using
__builtin_mul_overflow with these types for these targets.
If the semantics of __has_builtin mean "the compiler resolves these,
always" then we shouldn't conditionally emit a libcall.
This will still need to be worked around in the Linux kernel in order to
continue to support malta_defconfig builds of the Linux kernel for this
target with older releases of clang.
Link: https://bugs.llvm.org/show_bug.cgi?id=28629
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D108844
This also fixes some missing implicit uses on call instructions, adds
missing G_ASSERT_SEXT/ZEXT annotations, and some missing outgoing
sext/zexts. This also fixes not respecting tablegen requested type
promotions.
This starts treating f64 passed in i32 GPRs as a type of custom
assignment, which restores some previously XFAILed tests. This is due
to getNumRegistersForCallingConv returns a static value, but in this
case it is context dependent on other arguments.
Most of the ugliness is reproducing a hack CC_MipsO32 uses in
SelectionDAG. CC_MipsO32 depends on a bunch of vectors populated from
the original IR argument types in MipsCCState. The way this ends up
working in GlobalISel is it only ends up inspecting the most recently
added vector element. I'm pretty sure there are cleaner ways to do
this, but this seemed easier than fixing up the current DAG
handling. This is another case where it would be easier of the
CCAssignFns were passed the original type instead of only the
pre-legalized ones.
There's still a lot of junk here that shouldn't be necessary. This
also likely breaks big endian handling, but it wasn't complete/tested
anyway since the IRTranslator gives up on big endian targets.
The number of registers used for passing f64 in some cases is context
dependent, and thus getNumRegistersForCallingConv is sometimes
inaccurate. For f64, it reports 1 but is sometimes split into 2 32-bit
registers.
For GlobalISel, the generic argument assignment code expects
getNumRegistersForCallingConv to return an accurate answer. Switch to
marking these arguments as custom so we can deal with this case as a
custom assignment rather.
This temporarily breaks a few globalisel tests which are fixed by a
future change to use more of the generic infrastructure.
SelectionDAG's equivalents in ISD::InputArg/OutputArg track the
original argument index. Mips relies on this, and its currently
reinventing its own parallel CallLowering infrastructure which tracks
these indexes on the side. Add this to help move towards deleting the
custom mips handling.
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
This can be seen as a follow up to commit 0ee439b705,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
It used to be that all of our intrinsics were call instructions, but over time, we've added more and more invokable intrinsics. According to the verifier, we're up to 8 right now. As IntrinsicInst is a sub-class of CallInst, this puts us in an awkward spot where the idiomatic means to check for intrinsic has a false negative if the intrinsic is invoked.
This change switches IntrinsicInst from being a sub-class of CallInst to being a subclass of CallBase. This allows invoked intrinsics to be instances of IntrinsicInst, at the cost of requiring a few more casts to CallInst in places where the intrinsic really is known to be a call, not an invoke.
After this lands and has baked for a couple days, planned cleanups:
Make GCStatepointInst a IntrinsicInst subclass.
Merge intrinsic handling in InstCombine and use idiomatic visitIntrinsicInst entry point for InstVisitor.
Do the same in SelectionDAG.
Do the same in FastISEL.
Differential Revision: https://reviews.llvm.org/D99976
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
byval arguments need to be assumed writable. Only implicitly stack
passed arguments which aren't addressable in the IR can be assumed
immutable.
Mips is still broken since for some reason its doing its own thing
with the ValueHandlers (and x86 doesn't actually handle byval
arguments now, although some of the code is there).
The code deciding how to split the vector in register-sized integers used the integer division operator, thus rounding down the result.
Correct the computation for irregularly-sized types (non-power-of-two, non multiple of 8) by rounding the division result upwards.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D98189
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
I copied the nearly identical function from AArch64 into AMDGPU, so
fix this duplication.
Mips and X86 have their own more exotic versions which should be
removed. However replacing those is better left for a separate patch
since it requires other changes to avoid regressions.
This change introduces support for zero flag ELF section groups to LLVM.
LLVM already supports COMDAT sections, which in ELF are a special type
of ELF section groups. These are generally useful to enable linker GC
where you want a group of sections to always travel together, that is to
be either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF assemblers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D95851
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
A couple patterns used bitconvert on the immAllOnesV, but
the isel matching uses ISD::isBuildVectorAllOnes which
is able to look through bitcasts. So isel patterns don't need
to do it explicitly.
Various *TargetStreamer.h need formatted_raw_ostream but rely on a
forward declaration of formatted_raw_ostream in MCStreamer.h. This
patch adds forward declarations right in *TargetStreamer.h.
While we are at it, this patch removes the one in MCStreamer.h, where
it is unnecessary.
In MipsDelaySlotFiller, when replacing old call-branch with
the compact branch instruction, an assertion is caused by erasing
the old call with unhandled CSInfo.
The problem was reported in PR48695.
This patch fixes it, by moving call site info from the old call
instruction to its replace.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D94685
This fixes double printing of insertion debug messages in the
legalizer.
Try to cleanup usage of observers. Currently the use of observers is
pretty hard to follow and it's not clear what is responsible for
them. Observers are referenced in 3 places:
1. In the MachineFunction
2. In the MachineIRBuilder
3. In the LegalizerHelper
The observers in the MachineFunction and MachineIRBuilder are both
called only on insertions, and are redundant with each other. The
source of the double printing was the same observer was added to both
the MachineFunction, and the MachineIRBuilder. One of these references
needs to be removed. Arguably observers in general should be fully
removed from one or the other, but it may be useful to have a local
observer in the MachineIRBuilder that is not added to the function's
observers. Alternatively, the wrapper observer could manage a local
observer in one place.
The LegalizerHelper only ever calls the observer on changing/changed
instructions, and never insertions. Logically these are two different
types of observers, for changes and for insertions.
Additionally, some places used the GISelObserverWrapper when they only
needed a single observer they could use directly.
Setting the observer in the LegalizerHelper constructor is not
flexible enough if the LegalizerHelper is constructed anywhere outside
the one used by the legalizer. AMDGPU calls the LegalizerHelper in
RegBankSelect, and needs to use a local observer to apply the regbank
to newly created instructions. Currently it accomplishes this by
constructing a local MachineIRBuilder. I'm trying to move the
MachineIRBuilder to be owned/maintained by the RegBankSelect pass
itself, but the locally constructed LegalizerHelper would reset the
observer.
Mips also has a special case use of the LegalizationArtifactCombiner
in applyMappingImpl; I think we do need to run the artifact combiner
during RegBankSelect, but in a more consistent way outside of
applyMappingImpl.
If the return values can't be lowered to registers
SelectionDAG performs the sret demotion. This patch
contains the basic implementation for the same in
the GlobalISel pipeline.
Furthermore, targets should bring relevant changes
during lowerFormalArguments, lowerReturn and
lowerCall to make use of this feature.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D92953
Current implementation assumes that, each MachineConstantPoolValue takes
up sizeof(MachineConstantPoolValue::Ty) bytes. For PowerPC, we want to
lump all the constants with the same type as one MachineConstantPoolValue
to save the cost that calculate the TOC entry for each const. So, we need
to extend the MachineConstantPoolValue that break this assumption.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D89108
Kazu Hirata