GCC documentation for the `wa` constraint states that:
```
wa
A VSX register (VSR), vs0…vs63. This is either an FPR (vs0…vs31 are f0…f31)
or a VR (vs32…vs63 are v0…v31).
```
This technically means that we could accept floating point parameters. In fact,
gcc itself does. The following testcase compiles and runs on all PPC platforms with GCC,
whereas clang/llc will assert:
```
#include <stdio.h>
double foo ( vector double a ) {
double b, c;
asm("xvabsdp %x0, %x2 \n"
"xxsldwi %x1, %x0, %x0, 2 \n"
: "+wa" (b),
"=wa" (c)
: "wa" (a)
);
return b+c;
}
int main(void) {
vector double a = {-3., -4.};
double t = foo( a );
printf("%g\n", t);
}
```
This patch allows clang/llc to build and run this testcase.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D103409
Relaxing superclass constraint for VSX register classes helps reducing
32-byte spills and copies when register pressure is high.
In test case affected, some of them introduces more copies due to new
allocation order. However, this patch should not be the root cause, and
we may be able to fix it in other places of register allocation.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D104006
We will need to set the ssp canary bit in traceback table to communicate
with unwinder about the canary.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D103202
When `-fstack-clash-protection` is enabled and stack has to be realigned, some parts of redzone is written prior the probe, so probe might overwrite content already written in redzone. To avoid it, we have to make sure the first probe is at full probe size or is the last probe so that we can skip redzone.
It also fixes violation of ABI under PPC where `r1` isn't updated atomically.
This fixes https://bugs.llvm.org/show_bug.cgi?id=49903.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D100290
According to ELF V2 ABI, `0` should be the dwarf number of `r0`. Currently MMA's register also uses `0` as its dwarf number, this confuses `RegisterInfoEmitter` and generates wrong dwarf -> llvm mapping.
```
extern const MCRegisterInfo::DwarfLLVMRegPair PPCDwarfFlavour1Dwarf2L[] = {
{ 0U, PPC::VSRp31 },
```
This leads to wrong cfi output in https://reviews.llvm.org/D100290.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103761
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
The code gen for f32 to i32 bitcast is not currently the most efficient;
this patch removes some unneccessary instructions gerneated.
Differential revision: https://reviews.llvm.org/D100782
When you try to define a new DEBUG_TYPE in a header file, DEBUG_TYPE
definition defined around the #includes in files include it could
result in redefinition warnings even compile errors.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D102594
AIX use `__ssp_canary_word` instead of `__stack_chk_guard`.
This patch update the target hook to use correct symbol,
so that the basic stackprotect feature can work.
The traceback will be handled in follow up patch.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D103100
This is the first in a series of patches to provide builtins for
compatibility with the XL compiler. Most of the builtins already had
intrinsics and only needed to be implemented in the front end.
Intrinsics were created for the three iospace builtins, eieio, and icbt.
Pseudo instructions were created for eieio and iospace_eieio to
ensure that nops were inserted before the eieio instruction.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D102443
We are using TOCEntry symbols like `LC..0` in TOC loads,
this is hard to read , at least requiring an additional step to figure
out the loaded symbols.
We should print out the name in comments.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D102949
Partword atomic binaries are not zero extended as they should be.
This patch fixes them to ensure that they are zero extended.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D102819
These patterns are missing even though the underlying instruction
doesn't really care about the type. Added these patterns to resolve
https://bugs.llvm.org/show_bug.cgi?id=50084
This instruction is a nop on all server cores (certainly on all
cores that AIX supports) so it is fine to emit a nop instead of it.
In fact, that is exactly what XL emits. So we emit a nop on AIX
and we leave the codegen as is on other platforms since there may
indeed be cores out there for which this actually does some prefetching.
The default AsmPrinter print GV in comments,
AIX should do so too.
This also fix LLVM :: CodeGen/Generic/inline-asm-mem-clobber.ll.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D102534
Added hashst to the prologue and hashchk to the epilogue.
The hash for the prologue and epilogue must always be stored as the first
element in the local variable space on the stack.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D99377
There are two reasons this shouldn't be restricted to Power8 and up:
1. For XL compatibility
2. Because clang will expand comparison operators to these intrinsics*
*Without this patch, the following causes a selection error:
int test(vector signed long a, vector signed long b) {
return a < b;
}
This patch provides the handling for the intrinsics in the back
end and removes the Power8 guards from the predicate functions
(vec_{all|any}_{eq|ne|gt|ge|lt|le}).
getVectorNumElements() returns a value for scalable vectors
without any warning so it is effectively getVectorMinNumElements().
By renaming it and making getVectorNumElements() forward to
it, we can insert a check for scalable vectors into getVectorNumElements()
similar to EVT. I didn't do that in this patch because there are still more
fixes needed, but I was able to temporarily do it and passed the RISCV
lit tests with these changes.
The changes to isPow2VectorType and getPow2VectorType are copied from EVT.
The change to TypeInfer::EnforceSameNumElts reduces the size of AArch64's isel table.
We're now considering SameNumElts to require the scalable property to match which
removes some unneeded type checks.
This was motivated by the bug I fixed yesterday in 80b9510806
Reviewed By: frasercrmck, sdesmalen
Differential Revision: https://reviews.llvm.org/D102262
When an integer is converted into floating point in subword vector extract,
it can be done in 2 instructions instead of the 3+ instructions it generates
right now. This patch removes the uncessary generation.
Differential: https://reviews.llvm.org/D100604
The stack frame update code does not take into consideration spilling
to registers for callee saved registers. The option -ppc-enable-pe-vector-spills
turns on spilling to registers for callee saved registers and may expose a bug
in the code that moves a stack frame pointer update instruction.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D101366
If spills are to registers instead of to the stack then a copy will be used
and frame index scavenging is not required.
This patch adds debug info to frame index scavenging and makes sure that
spilling to registers does not cause frame index scavenging.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D101360
This is a simple fix on LE. On BE, vector shuffles are categorized into
different ops. We may need more work to eliminate these in
tablegen/pre-isel.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D101605
- Add branch absolute reloction R_RBA, R_TLS relocation for the variable offset
for the tlsgd model and R_TLSM for the region handle for the tlsgd model
- Properly set the relocation fixed values for R_TLS and R_TLSM
- Emit the TCEntry with the variant kind in the XCOFFStreamer
Reviewed by: sfertile, nemanjai, DiggerLin
Differential Revision: https://reviews.llvm.org/D100214
This patch updates the scalar atomic patterns to use the refactored load/store
implementation introduced in D93370.
All existing test cases pass with when the refactored patterns are utilized.
Differential Revision: https://reviews.llvm.org/D94498
The previous implementation of the default AltiVec ABI marked registers V20-V31
as reserved. This failed to prevent reserved VFRC registers being allocated.
In this patch instead of marking the registers reserved we remove unallowed
registers from the allocation order completely.
This is a slight rework of an implementation by @nemanjai
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D100050
This patch introduces a new infrastructure that is used to select the load and
store instructions in the PPC backend.
The primary motivation is that the current implementation of selecting load/stores
is dependent on the ordering of patterns in TableGen. Given this limitation, we
are not able to easily and reliably generate the P10 prefixed load and stores
instructions (such as when the immediates that fit within 34-bits). This
refactoring is meant to provide us with more control over the patterns/different
forms to exploit, as well as eliminating dependency of pattern declaration in TableGen.
The idea of this refactoring is that it introduces a set of addressing modes that
correspond to different instruction formats of a particular load and store
instruction, along with a set of common flags that describes a load/store.
Whenever a load/store instruction is being selected, we analyze the instruction
and compute a set of flags for it. The computed flags are then used to
select the most optimal load/store addressing mode.
This patch is the first of a series of patches to be committed - it contains the
initial implementation of the refactored load/store selection infrastructure and
also updates P8/P9 patterns to adopt this infrastructure. The idea is that
incremental patches will add more implementation and support, and eventually
the old implementation will be removed.
Differential Revision: https://reviews.llvm.org/D93370
Summary:
This patch implements the backend implementation of adding global variables
directly to the table of contents (TOC), rather than adding the address of the
variable to the TOC.
Currently, this patch will look for the "toc-data" attribute on symbols in the
IR, and then add those symbols to the TOC.
ATM, this is implemented for 32 bit AIX.
Reviewers: sfertile
Differential Revision: https://reviews.llvm.org/D101178
- Add new variantKinds for the symbol's variable offset and region handle
- Print the proper relocation specifier @gd in the asm streamer when emitting
the TC Entry for the variable offset for the symbol
- Fix the switch section failure between the TC Entry of variable offset and
region handle
- Put .__tls_get_addr symbol in the ProgramCodeSects with XTY_ER property
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D100956
This patch enables support on SPE for constrained arithmetic and
comparison operations. This fixes bugzilla 50070.
One thing not covered is fcmp vs. fcmps on SPE. Some condition code
generates singaling comparison while some not. In this patch, all are
considered as singaling. So there might be still some issue when
compiling from C code.
Reviewed By: jhibbits
Differential Revision: https://reviews.llvm.org/D101282
This patch adds the support to restrict prefixed instruction from
crossing the 64 byte boundary:
- Add the infrastructure to register a custom XCOFF streamer
- Add a custom XCOFF streamer for PowerPC to allow us to
intercept instructions as they are being emitted and align all 8 byte
instructions to a 64 byte boundary if required by adding a 4 byte nop.
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D101107
These are added for compatibility with XLC. They are similar to
vec_cts and vec_ctu except that the result is a doubleword vector
regardless of the parameter type.
We currently do not utilize instructions that convert single
precision vectors to doubleword integer vectors. These conversions
come up in code occasionally and this improvement allows us to
open code some functions that need to be added to altivec.h.
Extend shuffle canonicalization and conversion of shuffles fed by vectorized
scalars to big endian subtargets. For big endian subtargets, loads and direct
moves of scalars into vector registers put the data in the correct element for
SCALAR_TO_VECTOR if the data type is 8 bytes wide. However, if the data type is
narrower, the value still ends up in the wrong place - althouth a different
wrong place than on little endian targets.
This patch extends the combine that keeps values where they are if they feed a
shuffle to big endian targets.
Differential revision: https://reviews.llvm.org/D100478
This patch exploits mtvsrdd instruction (available in ISA3.0+) to save
two callee-saved GPR registers into a single VSR, making it more
efficient.
Reviewed By: jsji, nemanjai
Differential Revision: https://reviews.llvm.org/D62565
This patch is the last one in backend to support fp128 type in
pre-POWER9 subtargets with VSX, removing temporary option and updating
remaining tests.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92374
These constraints are machine agnostic; there's no reason to handle
these per-arch. If arches don't support these constraints, then they
will fail elsewhere during instruction selection. We don't need virtual
calls to look these up; TargetLowering::getInlineAsmMemConstraint should
only be overridden by architectures with additional unique memory
constraints.
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D100416
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
The VSX tablegen file has some rather eggregious uses of
COPY_TO_REGCLASS even in situations where it needs to use
SUBREG_TO_REG. While this produces correct code, it often doesn't
allow the register coalescer to coalesce copies and the resulting
code ends up being suboptimal. This patch just changes over
patterns that should use SUBREG_TO_REG.
We should consider the feeder user number when we do reverse memory
operation transformation. Otherwise, we may get negative impact.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D100166
XSCMPUQP is not available for pre-P9 subtargets. This patch will lower
them into libcall for correct behavior on power7/power8.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92083
Added cost estimation for switch instruction, updated costs of branches, fixed
phi cost.
Had to increase `-amdgpu-unroll-threshold-if` default value since conditional
branch cost (size) was corrected to higher value.
Test renamed to "control-flow.ll".
Removed redundant code in `X86TTIImpl::getCFInstrCost()` and
`PPCTTIImpl::getCFInstrCost()`.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D96805
Regiser types for xxsplti32dx for two td file patterns was incorrect.
Fixed the two types and added a test case that was reduced from a larger
failing test.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D100223
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
Previously, 34-bit constants were materialized in selectI64Imm(), and we relied
on td pattern matching to instead produce a pli. This becomes problematic as
there is no guarantee that the 34-bit constant will reach the td pattern
selection for pli. It is also possible for other transformations (such as complex
bit permutations) to also produce and utilize the 34-bit constant materialized
through selectI64Imm().
This patch instead produces pli on Power10 directly whenever the constant fits
within 34-bits.
Differential Revision: https://reviews.llvm.org/D99906
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
On ppc64 linux , MachineLICM will hoist caller preserved registers, including TOC loads of the global variable address, out of loops. This is to enable this on AIX for both ppc64 and ppc32.
Differential Revision: https://reviews.llvm.org/D99076
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
This patch exploits the xxsplti32dx instruction available on Power10
in place of constant pool loads where xxspltidp would not be able to,
usually because the immediate cannot fit into 32 bits.
Differential Revision: https://reviews.llvm.org/D95458
This patch changes the interface to take a RegisterKind, to indicate
whether the register bitwidth of a scalar register, fixed-width vector
register, or scalable vector register must be returned.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98874
Add an option to tell the compiler that it can use privileged instructions.
This patch only adds the option. Backend implementation will be added in a
future patch.
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D99193
In order to have the same option on power PC LLVM and power PC gcc
the option will be changed from -mrop-protection to -mrop-protect.
The feature will be off by default and turned on when the option is used.
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D99185
Do not try to materialize a constant using prefix instructions if the selection
using non prefix instructions was able to do it using a single non prefix
instruction.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D98791
There are some instances where we produce constants of type MVT::i64
unconditionally in the target DAG combines. This is not actually
valid in 32-bit mode.
The TargetMachine uses the triple to determine endianness. Just
use that logic rather than replicating it in PPCSubtarget.
Differential revision: https://reviews.llvm.org/D98674
When a D-Form instruction is fed by an add-immediate, we attempt
to merge the two immediates to form a single displacement so we
can remove the add-immediate.
However, we don't check whether the new displacement fits into
a 16-bit signed immediate field early enough. Namely, we do a
sign-extend from 16 bits first which will discard high bits and
then we check whether the result is a 16-bit signed immediate.
It of course will always be.
Move the check prior to the sign extend to ensure we are checking
the correct value.
Fixes https://bugs.llvm.org/show_bug.cgi?id=49640
This adds an Mask ArrayRef to getShuffleCost, so that if an exact mask
can be provided a more accurate cost can be provided by the backend.
For example VREV costs could be returned by the ARM backend. This should
be an NFC until then, laying the groundwork for that to be added.
Differential Revision: https://reviews.llvm.org/D98206
Prefer (self-documenting) return values to output parameters (which are
liable to be used).
While here, rename Noop to Nop which is more widely used and improves
consistency with hasEmitNops/setEmitNops/emitNop/etc.
Starting with Power 10 the instruction paddi is available to use.
The instruction allows for immediates that are 34 bits.
This patch adds exploitation of the paddi instruction to allow us
to materialize constants.
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D93300
4c973ae implemented reduction of vector swap for lane-insensitive
operations. This commit fixes it for checking number of uses of the
vector operation.
If we encounter a degenerate select node where both operands are
the same, then we can continue negating the condition while swapping
operands, resulting in an infinite loop. Avoid this by bailing out
if both operands are the same.
Fixes https://bugs.llvm.org/show_bug.cgi?id=49509.
Differential Revision: https://reviews.llvm.org/D98340
This patch simplifies pattern (xxswap (vec-op (xxswap a) (xxswap b)))
into (vec-op a b) if vec-op is lane-insensitive. The motivating case
is ScalarToVector-VecOp-ExtractElement sequence on LE, but the
peephole itself is not related to endianness, so BE may also benefit
from this.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D97658
This pull request implements patterns to exploit the load rightmost vector
element instructions for loading element 0 on little endian PowerPC subtargets
into v8i16 and v16i8 vector registers for i16 and i8 data types.
Differential Revision: https://reviews.llvm.org/D94816#inline-921403
Add support for the TLS general dynamic access model to assembly
files on AIX 64-bit.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D98078
Since P8 is the oldest machine supported by MASSV pass,
_massv place holder is removed and the oldest version of
MASSV functions is assumed. If the P9 vector specific is
detected in the compilation process, the P8 prefix will
be updated to P9.
Differential Revision: https://reviews.llvm.org/D98064
Adds support for the TLS general dynamic access model to
assembly files on AIX 32-bit.
To generate the correct code sequence when accessing a TLS variable
`v`, we first create two TOC entry nodes, one for the variable offset, one
for the region handle. These nodes are followed by a `PPCISD::TLSGD_AIX`
node (new node introduced by this patch).
The `PPCISD::TLSGD_AIX` node (`TLSGDAIX` pseudo instruction) is
expanded to 2 copies (to put the variable offset and region handle in
the right registers) and a call to `__tls_get_addr`.
This patch also changes the way TC entries are generated in asm files.
If the generated TC entry is for the region handle of a TLS variable,
we add the `@m` relocation and the `.` prefix to the entry name.
For example:
```
L..C0:
.tc .v[TC],v[TL]@m -> region handle
L..C1:
.tc v[TC],v[TL] -> variable offset
```
Reviewed By: nemanjai, sfertile
Differential Revision: https://reviews.llvm.org/D97948
This changes the target data layout to make stack align to 16 bytes
on Power10. Before this change, stack was being aligned to 32 bytes.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D96265
Patch adds support for passing vector call operands to variadic
functions. Arguments which are fixed shadow GPRs and stack space even
when they are passed in vector registers, while arguments passed through
ellipses are passed in properly aligned GPRs if available and on the
stack once all GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97956
This patch adds support for the default AltiVec ABI for AIX.
Vector registers 20 through 31 are marked as reserved and cannot
be used in the default ABI. This patch adds handling for this case
and also remove the default AltiVec ABI errors.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D96351
Copy-paste P9 insns were added back in 2016,
however, looks like the opcodes has changed in ISA3.1.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D97416
Patch adds support for passing vector arguments to variadic functions.
Arguments which are fixed shadow GPRs and stack space even when they are
passed in vector registers, while arguments passed through ellipses are
passed in(properly aligned GPRs if available and on the stack once all
GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97485
This patch allows generating TLS variables in assembly files on AIX.
Initialized and external uninitialized variables are generated with the
.csect pseudo-op and local uninitialized variables are generated with
the .comm/.lcomm pseudo-ops. The patch also adds a check to
explicitly say that TLS is not yet supported on AIX.
Reviewed by: daltenty, jasonliu, lei, nemanjai, sfertile
Originally patched by: bsaleil
Commandeered by: NeHuang
Differential Revision: https://reviews.llvm.org/D96184
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
This patch provides two major changes:
1. Add getRelocationInfo to check if a constant will have static, dynamic, or
no relocations. (Also rename the original needsRelocation to needsDynamicRelocation.)
2. Only allow a constant with no relocations (static or dynamic) to be placed
in a mergeable section.
This will allow unused symbols that contain static relocations and happen to
fit in mergeable constant sections (.rodata.cstN) to instead be placed in
unique-named sections if -fdata-sections is used and subsequently garbage collected
by --gc-sections.
See https://lists.llvm.org/pipermail/llvm-dev/2021-February/148281.html.
Differential Revision: https://reviews.llvm.org/D95960
This patch generates the vinsw, vinsd, vinsblx, vinshlx, vinswlx, vinsdlx,
vinsbrx, vinshrx, vinswrx and vinsdrx instructions for vector insertion on P10.
Differential Revision: https://reviews.llvm.org/D94454
Added -mrop-protection for Power PC to turn on codegen that provides some
protection from ROP attacks.
The option is off by default and can be turned on for Power 8, Power 9 and
Power 10.
This patch is for the option only. The feature will be implemented by a later
patch.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D96512
We are going to support debug sections for XCOFF. So the csect
properties are not necessary. This patch makes these properties
optional.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D95931
Summary:
Currently Shrinkwrap is not enabled on AIX.
This patch enables shrink wrap on 32 and 64 bit AIX, and 64 bit ELF.
Reviewed By: sfertile, nemanjai
Differential Revision: https://reviews.llvm.org/D95094
Do not defer to the base class when the register constraint is a
physical fpr. The base class will select SPILLTOVSRRC as the register
class and register allocation will fail on subtargets without VSX
registers.
Differential Revision: https://reviews.llvm.org/D91629
We currently represent TOC entries by an MCSymbol. This is not enough in some situations.
For example, when accessing an initialized TLS variable v on AIX using the general dynamic
model, we need to generate the two following entries for v:
.tc .v[TC],v@m
.tc v[TC],v
One is for the region handle (with the @m relocation), the other is for the variable offset.
This refactoring allows storing several entries for the same symbol with different VariantKind
in the TOC. If the VariantKind is not specified, we default to VK_None.
The AIX TLS implementation using this refactoring to generate the two entries will be posted
in a subsequent patch.
Patched By: bsaleil
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D96346
As of commit 284f2bffc9, the DAG Combiner gets rid of the masking of the
input to this node if the mask only keeps the bottom 16 bits. This is because
the underlying library function does not use the high order bits. However, on
PowerPC's ELFv2 ABI, it is the caller that is responsible for clearing the bits
from the register. Therefore, the library implementation of __gnu_h2f_ieee will
return an incorrect result if the bits aren't cleared.
This combine is desired for ARM (and possibly other targets) so this patch adds
a query to Target Lowering to check if this zeroing needs to be kept.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=49092
Differential revision: https://reviews.llvm.org/D96283
NOTE: This patch was originally written by Anil Mahmud. His code has been
rebased but otherwise left mostly unchanged.
A new instructon on Power 10 allows for the materialization of 34 bit
immediate values. This patch allows the compiler to take advantage of
the new instruction in this situation.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D92879
Some cases may be transformed into 32 bit splats before hitting the boolean statement, which may cause incorrect behaviour and provide XXSPLTI32DX with the incorrect values of splat. The condition was reversed so that the shortcut prevents this problem.
Differential Revision: https://reviews.llvm.org/D95634
If the APInt returned by BuildVectorSDNode::isConstantSplat() is narrower than
64 bits, the result produced by XXSPLTI32DX is incorrect. The result returned
by the function appears to be incorrect and we'll investigate/fix it in a
follow-up commit. However, since this causes miscompiles, we must
temporarily disable emitting this instruction for such values.
This intrinsic is supposed to have the permute control vector complemented on
little endian systems (as the ABI specifies and GCC implements). With the
current code gen, the result vector is byte-reversed.
Differential revision: https://reviews.llvm.org/D95004
For now, we correct the result for sqrt if iteration > 0. This doesn't make
sense as they are not strict relative.
Reviewed By: dmgreen, spatel, RKSimon
Differential Revision: https://reviews.llvm.org/D94480
Reassociating some patterns to generate more fma instructions to
reduce register pressure.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D92071
The only caller of this function is in the LocalStackSlotAllocation
and it creates base register of class returned by the target's
getPointerRegClass(). AMDGPU wants to use a different reg class
here so let materializeFrameBaseRegister to just create and return
whatever it wants.
Differential Revision: https://reviews.llvm.org/D95268
PowerPC has its custom scheduler heuristic. It calls parent classes'
tryCandidate in override version, but the function returns void, so this
way doesn't actually help. This patch duplicates code from base scheduler
into PPC machine scheduler class, which does what we wanted.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D94464
Exploits the instruction xxsplti32dx.
It can be used to materialize any 64 bit scalar/vector splat by using two instances, one for the upper 32 bits and the other for the lower 32 bits. It should not materialize the cases which can be materialized by using the instruction xxspltidp.
Differential Revision: https://https://reviews.llvm.org/D90173
zhijian