The fix applied in D23303 "LiveIntervalAnalysis: fix a crash in repairOldRegInRange"
was over-zealous. It would bail out when the end of the range to be
repaired was in the middle of the first segment of the live range of
Reg, which was always the case when the range contained a single def of
Reg.
This patch fixes it as suggested by Matthias Braun in post-commit review
on the original patch, and tests it by adding -early-live-intervals to
a selection of existing lit tests that now pass.
(Note that D23303 was originally applied to fix a crash in
SILoadStoreOptimizer, but that is now moot since D23814 updated
SILoadStoreOptimizer to run before scheduling so it no longer has to
update live intervals.)
Differential Revision: https://reviews.llvm.org/D110238
Unrevert with some changes to the tests:
- Add -verify-machineinstrs to check for remaining problems in live
interval support in TwoAddressInstructionPass.
- Drop test/CodeGen/AMDGPU/extract-load-i1.ll since it suffers from
some of those remaining problems.
The fix applied in D23303 "LiveIntervalAnalysis: fix a crash in repairOldRegInRange"
was over-zealous. It would bail out when the end of the range to be
repaired was in the middle of the first segment of the live range of
Reg, which was always the case when the range contained a single def of
Reg.
This patch fixes it as suggested by Matthias Braun in post-commit review
on the original patch, and tests it by adding -early-live-intervals to
a selection of existing lit tests that now pass.
(Note that D23303 was originally applied to fix a crash in
SILoadStoreOptimizer, but that is now moot since D23814 updated
SILoadStoreOptimizer to run before scheduling so it no longer has to
update live intervals.)
Differential Revision: https://reviews.llvm.org/D110238
Neither of these passes modify the CFG, allowing us to preserve DomTree
and LoopInfo across them by using setPreservesCFG.
Differential Revision: https://reviews.llvm.org/D110161
Add eraseInstr(s) utility functions. Before deleting an instruction
collects its use instructions. After deletion deletes use instructions
that became trivially dead.
This patch clears all dead instructions in existing legalizer mir tests.
Differential Revision: https://reviews.llvm.org/D109154
Recently a vulnerability issue is found in the implementation of VLLDM
instruction in the Arm Cortex-M33, Cortex-M35P and Cortex-M55. If the
VLLDM instruction is abandoned due to an exception when it is partially
completed, it is possible for subsequent non-secure handler to access
and modify the partial restored register values. This vulnerability is
identified as CVE-2021-35465.
The mitigation sequence varies between v8-m and v8.1-m as follows:
v8-m.main
---------
mrs r5, control
tst r5, #8 /* CONTROL_S.SFPA */
it ne
.inst.w 0xeeb00a40 /* vmovne s0, s0 */
1:
vlldm sp /* Lazy restore of d0-d16 and FPSCR. */
v8.1-m.main
-----------
vscclrm {vpr} /* Clear VPR. */
vlldm sp /* Lazy restore of d0-d16 and FPSCR. */
More details on
developer.arm.com/support/arm-security-updates/vlldm-instruction-security-vulnerability
Differential Revision: https://reviews.llvm.org/D109157
When expanding the non-secure call instruction we are emiting code
to clear the secure floating-point registers only if the targeted
architecture has floating-point support. The potential problem is
when the source code containing non-secure calls are built with
-mfloat-abi=soft but some other part of the system has been built
with -mfloat-abi=softfp (soft and softfp are compatible as they use
the same procedure calling standard). In this case floating-point
registers could leak to non-secure state as the non-secure won't
have cleared them assuming no floating point has been used.
Differential Revision: https://reviews.llvm.org/D109153
Under some situations under Thumb1, we could be stuck in an infinite
loop recombining the same instruction. This puts a limit on that, not
combining SUBC with SUBE repeatedly.
The fmul is a canonicalizing operation, and fneg is not so this would
break denormals that need flushing and also would not quiet signaling
nans. Fold to fsub instead, which is also canonicalizing.
This simple heuristic uses the estimated live range length combined
with the number of registers in the class to switch which heuristic to
use. This was taking the raw number of registers in the class, even
though not all of them may be available. AMDGPU heavily relies on
dynamically reserved numbers of registers based on user attributes to
satisfy occupancy constraints, so the raw number is highly misleading.
There are still a few problems here. In the original testcase that
made me notice this, the live range size is incorrect after the
scheduler rearranges instructions, since the instructions don't have
the original InstrDist offsets. Additionally, I think it would be more
appropriate to use the number of disjointly allocatable registers in
the class. For the AMDGPU register tuples, there are a large number of
registers in each tuple class, but only a small fraction can actually
be allocated at the same time since they all overlap with each
other. It seems we do not have a query that corresponds to the number
of independently allocatable registers. Relatedly, I'm still debugging
some allocation failures where overlapping tuples seem to not be
handled correctly.
The test changes are mostly noise. There are a handful of x86 tests
that look like regressions with an additional spill, and a handful
that now avoid a spill. The worst looking regression is likely
test/Thumb2/mve-vld4.ll which introduces a few additional
spills. test/CodeGen/AMDGPU/soft-clause-exceeds-register-budget.ll
shows a massive improvement by completely eliminating a large number
of spills inside a loop.
On some architectures such as Arm and X86 the encoding for a nop may
change depending on the subtarget in operation at the time of
encoding. This change replaces the per module MCSubtargetInfo retained
by the targets AsmBackend in favour of passing through the local
MCSubtargetInfo in operation at the time.
On Arm using the architectural NOP instruction can have a performance
benefit on some implementations.
For Arm I've deleted the copy of the AsmBackend's MCSubtargetInfo to
limit the chances of this causing problems in the future. I've not
done this for other targets such as X86 as there is more frequent use
of the MCSubtargetInfo and it looks to be for stable properties that
we would not expect to vary per function.
This change required threading STI through MCNopsFragment and
MCBoundaryAlignFragment.
I've attempted to take into account the in tree experimental backends.
Differential Revision: https://reviews.llvm.org/D45962
Given a select_cc producing a constant and a invertion of the constant
for a comparison more than zero, we can produce an xor with ashr
instead, which produces smaller code. The ashr either sets all bits or
clear all bits depending on if the value is negative. This is then xor'd
with the constant to optionally negate the value.
https://alive2.llvm.org/ce/z/DTFaBZ
This includes a OneUseCheck on the Cmp, which seems to make thinks a
little worse and will be removed in a followup.
Differential Revision: https://reviews.llvm.org/D109149
Pulled out of D109149, this folds set_cc seteq (ashr X, BW-1), -1 ->
set_cc setlt X, 0 to prevent some regressions later on when folding
select_cc setgt X, -1, C, ~C -> xor (ashr X, BW-1), C
Differential Revision: https://reviews.llvm.org/D109214
As an extension to D107866, this adds store(fptosisat(..)) patterns,
similar to the existing fptosi patterns, to prevent unnecessarily moving
into gpr regs where we can use fp stores directly.
Differential Revision: https://reviews.llvm.org/D108378
This extends D107865 to the VFP insructions, lowering llvm.fptosi.sat
and llvm.fptoui.sat to VCVT instructions that inherently perform the
saturate.
Differential Revision: https://reviews.llvm.org/D107866
The semantics of tail predication loops means that the value of LR as an
instruction is executed determines the predicate. In other words:
mov r3, #3
DLSTP lr, r3 // Start tail predication, lr==3
VADD.s32 q0, q1, q2 // Lanes 0,1 and 2 are updated in q0.
mov lr, #1
VADD.s32 q0, q1, q2 // Only first lane is updated.
This means that the value of lr cannot be spilled and re-used in tail
predication regions without potentially altering the behaviour of the
program. More lanes than required could be stored, for example, and in
the case of a gather those lanes might not have been setup, leading to
alignment exceptions.
This patch adds a new lr predicate operand to MVE instructions in order
to keep a reference to the lr that they use as a tail predicate. It will
usually hold the zeroreg meaning not predicated, being set to the LR phi
value in the MVETPAndVPTOptimisationsPass. This will prevent it from
being spilled anywhere that it needs to be used.
A lot of tests needed updating.
Differential Revision: https://reviews.llvm.org/D107638
__has_builtin(__builtin_mul_overflow) returns true for 32b ARM targets,
but Clang is deferring to compiler RT when encountering `long long`
types. This breaks sanitizer builds of the Linux kernel that are using
__builtin_mul_overflow with these types for these targets.
If the semantics of __has_builtin mean "the compiler resolves these,
always" then we shouldn't conditionally emit a libcall.
This will still need to be worked around in the Linux kernel in order to
continue to support allmodconfig builds of the Linux kernel for this
target with older releases of clang.
Link: https://bugs.llvm.org/show_bug.cgi?id=28629
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D108842
This adds extra MVE vector fptosi.sat and fptoui.sat tests, along with
adding or adjusting the existing scalar tests to cover more
architectures and instruction combinations.
Currently isReallyTriviallyReMaterializableGeneric() implementation
prevents rematerialization on any virtual register use on the grounds
that is not a trivial rematerialization and that we do not want to
extend liveranges.
It appears that LRE logic does not attempt to extend a liverange of
a source register for rematerialization so that is not an issue.
That is checked in the LiveRangeEdit::allUsesAvailableAt().
The only non-trivial aspect of it is accounting for tied-defs which
normally represent a read-modify-write operation and not rematerializable.
The test for a tied-def situation already exists in the
/CodeGen/AMDGPU/remat-vop.mir,
test_no_remat_v_cvt_f32_i32_sdwa_dst_unused_preserve.
The change has affected ARM/Thumb, Mips, RISCV, and x86. For the targets
where I more or less understand the asm it seems to reduce spilling
(as expected) or be neutral. However, it needs a review by all targets'
specialists.
Differential Revision: https://reviews.llvm.org/D106408
When Src and Dst used in buildAnyExtOrTrunc or buildSExtOrTrunc
have the same type (creates COPY) use Src register directly or
use replaceRegOrBuildCopy instead.
Differential Revision: https://reviews.llvm.org/D108306
This does the same as D96259, but for ARM, just like AArch64,
using the same comment char as for ELF and MinGW mode.
As the assembly input/output of LLVM is GAS style, trying to
match what MS armasm.exe does isn't needed (because the comment
char used is the least concern when it comes to that; all
directives differ too). If a separate armasm compatible mode
is implemented, it can use its own comment style (just like
llvm-ml implements MS ml.exe compatible assembly parsing).
This fixes building compiler-rt assembly files for ARM in MSVC
mode.
The updated testcase literals-comments.s was only intended to
make sure that '#' isn't interpreted as a comment char.
Differential Revision: https://reviews.llvm.org/D107251
This changes the lowering of saddsat and ssubsat so that instead of
using:
r,o = saddo x, y
c = setcc r < 0
s = c ? INTMAX : INTMIN
ret o ? s : r
into using asr and xor to materialize the INTMAX/INTMIN constants:
r,o = saddo x, y
s = ashr r, BW-1
x = xor s, INTMIN
ret o ? x : r
https://alive2.llvm.org/ce/z/TYufgD
This seems to reduce the instruction count in most testcases across most
architectures. X86 has some custom lowering added to compensate for
cases where it can increase instruction count.
Differential Revision: https://reviews.llvm.org/D105853
Currently isReallyTriviallyReMaterializableGeneric() implementation
prevents rematerialization on any virtual register use on the grounds
that is not a trivial rematerialization and that we do not want to
extend liveranges.
It appears that LRE logic does not attempt to extend a liverange of
a source register for rematerialization so that is not an issue.
That is checked in the LiveRangeEdit::allUsesAvailableAt().
The only non-trivial aspect of it is accounting for tied-defs which
normally represent a read-modify-write operation and not rematerializable.
The test for a tied-def situation already exists in the
/CodeGen/AMDGPU/remat-vop.mir,
test_no_remat_v_cvt_f32_i32_sdwa_dst_unused_preserve.
The change has affected ARM/Thumb, Mips, RISCV, and x86. For the targets
where I more or less understand the asm it seems to reduce spilling
(as expected) or be neutral. However, it needs a review by all targets'
specialists.
Differential Revision: https://reviews.llvm.org/D106408
This test didn't include all test check lines, thanks to .'s in function
names. It also changed the triple to hard float to make a more
interesting test for NEON code generation.
Some of the Arm complex pattern functions call canExtractShiftFromMul,
which can modify the DAG in-place. For this to be valid and handled
successfully we need to define ComplexPatternFuncMutatesDAG.
Differential Revision: https://reviews.llvm.org/D107476
D107068 fixed the same problem on aarch64 but the arm variant wasn't exposed in existing test coverage.
I've copied the arm64-neon-copy tests (and stripped the intrinsic test from it) for testing on arm neon builds as well.
This assert is intended to ensure that the high registers are not
selected when it is passed to one of the thumb UXT instructions. However
it was triggering even for 32 bit where no UXT instruction is emitted.
Fixes PR51313.
Differential Revision: https://reviews.llvm.org/D107363
Previously we would emit constant pool entries for ldr inline asm at the
very end of AsmPrinter::doFinalization(). However, if we're emitting
dwarf aranges, that would end all sections with aranges. Then if we have
constant pool entries to be emitted in those same sections, we'd hit an
assert that the section has already been ended.
We want to emit constant pool entries before emitting dwarf aranges.
This patch splits out arm32/64's constant pool entry emission into its
own MCTargetStreamer virtual method.
Fixes PR51208
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107314
Function findBestLoopTopHelper tries to find a new loop top block which can also
fall through to OldTop, but it's impossible if OldTop is not a chain header, so
it should exit immediately.
Differential Revision: https://reviews.llvm.org/D106329
In mandatory tail calling conventions we might have to deallocate stack
space used by our arguments before return. This happens after popping
CSRs, so the pop cannot be turned into the return itself in this case.
The else branch here was already a nop, so removing it as a tidy-up.
This removes the promotion of NEON AND, OR and XOR nodes to v2i32/v4i32,
treating them the same as the AArch64 and MVE backends where we just add
the relevant patterns for each legal type. This prevents a lot of
bitcasts from being added to the DAG, which have the potential to make
optimizations more difficult. It does mean adding extra patterns, and
some codegen can change due to the types now being legal, not promoted.
Differential Revision: https://reviews.llvm.org/D105588
Since we're still building on top of the MVT based infrastructure, we
need to track the pointer type/address space on the side so we can end
up with the correct pointer LLTs when interpreting CCValAssigns.
If we try to create a new GlobalVariable on each iteration, the Module will
detect the name collision and "helpfully" rename later iterations by appending
".1" etc. But "___udivsi3.1" doesn't exist and we definitely don't want to try
to call it.
So instead check whether there's already a global with the right name in the
module and use that if so.
This new MIR pass removes redundant DBG_VALUEs.
After the register allocator is done, more precisely, after
the Virtual Register Rewriter, we end up having duplicated
DBG_VALUEs, since some virtual registers are being rewritten
into the same physical register as some of existing DBG_VALUEs.
Each DBG_VALUE should indicate (at least before the LiveDebugValues)
variables assignment, but it is being clobbered for function
parameters during the SelectionDAG since it generates new DBG_VALUEs
after COPY instructions, even though the parameter has no assignment.
For example, if we had a DBG_VALUE $regX as an entry debug value
representing the parameter, and a COPY and after the COPY,
DBG_VALUE $virt_reg, and after the virtregrewrite the $virt_reg gets
rewritten into $regX, we'd end up having redundant DBG_VALUE.
This breaks the definition of the DBG_VALUE since some analysis passes
might be built on top of that premise..., and this patch tries to fix
the MIR with the respect to that.
This first patch performs bacward scan, by trying to detect a sequence of
consecutive DBG_VALUEs, and to remove all DBG_VALUEs describing one
variable but the last one:
For example:
(1) DBG_VALUE $edi, !"var1", ...
(2) DBG_VALUE $esi, !"var2", ...
(3) DBG_VALUE $edi, !"var1", ...
...
in this case, we can remove (1).
By combining the forward scan that will be introduced in the next patch
(from this stack), by inspecting the statistics, the RemoveRedundantDebugValues
removes 15032 instructions by using gdb-7.11 as a testbed.
Differential Revision: https://reviews.llvm.org/D105279
The test case here hits machine verifier problems. There are volatile
long loads that the results of do not get used, loading into two dead
registers. IfCvt will predicate them and as it does will add implicit
uses of the predicating registers due to thinking they are live in. As
nothing has used the register, the machine verifier disagrees that they
are really live and we end up with a failure.
The registers come from Pristine regs that LivePhysRegs counts as live.
This patch adds a addLiveInsNoPristines method to be used instead in
IfCvt, so that only really live in regs need to be added as implicit
operands.
Differential Revision: https://reviews.llvm.org/D90965
Stanislav Mekhanoshin