FoldPHIArgZextsIntoPHI cannot insert an instruction after the PHI if
there is an EHPad in the BB. Doing so would result in an instruction
inserted after a terminator.
llvm-svn: 252377
We tried to insert a cast of a phi in a block whose terminator is an
EHPad. This is invalid. Do not attempt the transform in these
circumstances.
llvm-svn: 252370
Summary:
InstCombine tries to transform GEP(PHI(GEP1, GEP2, ..)) into GEP(GEP(PHI(...))
when possible. However, this may leave the old PHI node around. Even if we
do end up folding the GEPs, having an extra PHI node might not be beneficial.
This change makes the transformation more conservative. We now only do this if
the PHI has only one use, and can therefore be removed after the transformation.
Reviewers: jmolloy, majnemer
Subscribers: mcrosier, mssimpso, llvm-commits
Differential Revision: http://reviews.llvm.org/D13887
llvm-svn: 251281
First, the motivation: LLVM currently does not realize that:
((2072 >> (L == 0)) >> 7) & 1 == 0
where L is some arbitrary value. Whether you right-shift 2072 by 7 or by 8, the
lowest-order bit is always zero. There are obviously several ways to go about
fixing this, but the generic solution pursued in this patch is to teach
computeKnownBits something about shifts by a non-constant amount. Previously,
we would give up completely on these. Instead, in cases where we know something
about the low-order bits of the shift-amount operand, we can combine (and
together) the associated restrictions for all shift amounts consistent with
that knowledge. As a further generalization, I refactored all of the logic for
all three kinds of shifts to have this capability. This works well in the above
case, for example, because the dynamic shift amount can only be 0 or 1, and
thus we can say a lot about the known bits of the result.
This brings us to the second part of this change: Even when we know all of the
bits of a value via computeKnownBits, nothing used to constant-fold the result.
This introduces the necessary code into InstCombine and InstSimplify. I've
added it into both because:
1. InstCombine won't automatically pick up the associated logic in
InstSimplify (InstCombine uses InstSimplify, but not via the API that
passes in the original instruction).
2. Putting the logic in InstCombine allows the resulting simplifications to become
part of the iterative worklist
3. Putting the logic in InstSimplify allows the resulting simplifications to be
used by everywhere else that calls SimplifyInstruction (inlining, unrolling,
and many others).
And this requires a small change to our definition of an ephemeral value so
that we don't break the rest case from r246696 (where the icmp feeding the
@llvm.assume, is also feeding a br). Under the old definition, the icmp would
not be considered ephemeral (because it is used by the br), but this causes the
assume to remove itself (in addition to simplifying the branch structure), and
it seems more-useful to prevent that from happening.
llvm-svn: 251146
Allow LLVM to optimize the sequence like the following:
%inc = add nsw i32 %i, 1
%cmp = icmp slt %n, %inc
into:
%cmp = icmp sle i32 %n, %i
The case is not handled previously due to the complexity of compuation of %n.
Hence, LLVM cannot swap operands of icmp accordingly.
llvm-svn: 250746
This patch improves support for combining the SSE4A EXTRQ(I) and INSERTQ(I) intrinsics:
1 - Converts INSERTQ/EXTRQ calls to INSERTQI/EXTRQI if the 'bit index' and 'length' operands are constant
2 - Converts INSERTQI/EXTRQI calls to shufflevector if the bit index/length are both byte aligned (we can already lower shuffles to INSERTQI/EXTRQI if its useful)
3 - Constant folding support
4 - Add zeroinitializer handling
Differential Revision: http://reviews.llvm.org/D13348
llvm-svn: 250609
As discussed in D13348 - the INSERTQI range combining code is wrong in that it confuses the insertion bit index with an extraction bit index.
The remaining legal combines are very unlikely (especially once we've converted to shuffles in D13348) so I'm removing the optimization.
llvm-svn: 250160
This is a partial fix for PR24886:
https://llvm.org/bugs/show_bug.cgi?id=24886
Without this IR transform, the backend (x86 at least) was producing inefficient code.
This patch is making 2 assumptions:
1. The canonical form of a fabs() operation is, in fact, the LLVM fabs() intrinsic.
2. The high bit of an FP value is always the sign bit; as noted in the bug report, this isn't specified by the LangRef.
Differential Revision: http://reviews.llvm.org/D13076
llvm-svn: 249702
This will allow us to optimize code such as:
int f(int *p) {
int x;
return p == &x;
}
as well as:
int *allocate(void);
int f() {
int x;
int *p = allocate();
return p == &x;
}
The folding can only be done under certain circumstances. Even though p and &x
cannot alias, the comparison must still return true if the pointer
representations are equal. If a user successfully generates a p that's a
correct guess for &x, comparison should return true even though p is an invalid
pointer.
This patch argues that if the address of the alloca isn't observable outside the
function, the function can act as-if the address is impossible to guess from the
outside. The tricky part is keeping the act consistent: if we fold p == &x to
false in one place, we must make sure to fold any other comparisons based on
those pointers similarly. To ensure that, we only fold when &x is involved
exactly once in comparison instructions.
Differential Revision: http://reviews.llvm.org/D13358
llvm-svn: 249490
Summary:
- Add CoreCLR to if/else ladders and switches as appropriate.
- Rename isMSVCEHPersonality to isFuncletEHPersonality to better
reflect what it captures.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13449
llvm-svn: 249455
If the mask of a select instruction is a ConstantVector, method
SimplifyDemandedVectorElts iterates over the mask elements to identify which
values are selected from the select inputs.
Before this patch, method SimplifyDemandedVectorElts always used method
Constant::isNullValue() to check if a value in the mask was zero. Unfortunately
that method always returns false when called on a ConstantExpr.
This patch fixes the problem in SimplifyDemandedVectorElts by adding an explicit
check for ConstantExpr values. Now, if a value in the mask is a ConstantExpr, we
avoid calling isNullValue() on it.
Fixes PR24922.
Differential Revision: http://reviews.llvm.org/D13219
llvm-svn: 249390
The most important part required to make clang
devirtualization works ( ͡°͜ʖ ͡°).
The code is able to find non local dependencies, but unfortunatelly
because the caller can only handle local dependencies, I had to add
some restrictions to look for dependencies only in the same BB.
http://reviews.llvm.org/D12992
llvm-svn: 249196
Summary:
Some passes may open up opportunities for optimizations, leaving empty
lifetime start/end ranges. For example, with the following code:
void foo(char *, char *);
void bar(int Size, bool flag) {
for (int i = 0; i < Size; ++i) {
char text[1];
char buff[1];
if (flag)
foo(text, buff); // BBFoo
}
}
the loop unswitch pass will create 2 versions of the loop, one with
flag==true, and the other one with flag==false, but always leaving
the BBFoo basic block, with lifetime ranges covering the scope of the for
loop. Simplify CFG will then remove BBFoo in the case where flag==false,
but will leave the lifetime markers.
This patch teaches InstCombine to remove trivially empty lifetime marker
ranges, that is ranges ending right after they were started (ignoring
debug info or other lifetime markers in the range).
This fixes PR24598: excessive compile time after r234581.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13305
llvm-svn: 249018
This patch teaches InstCombiner how to convert a SSSE3/AVX2 byte shuffle to a
builtin shuffle if the mask is constant.
Converting byte shuffle intrinsic calls to builtin shuffles can help finding
more opportunities for combining shuffles later on in selection dag.
We may end up with byte shuffles with constant masks as the result of inlining.
Differential Revision: http://reviews.llvm.org/D13252
llvm-svn: 248913
Currently SimplifyDemandedVectorElts can only peek through bitcasts if the vectors have the same number of elements.
This patch fixes and enables some existing (disabled) code to support bitcasting to vectors with more/fewer elements. It currently only accepts cases when vectors alias cleanly (i.e. number of elements are an exact multiple of the other vector).
This was added to improve the demanded vector elements support for SSE vector shifts which require the __m128i (<2 x i64>) argument type to be bitcast to the vector type for the builtin shift. I've added extra tests for various additional bitcasts.
Differential Revision: http://reviews.llvm.org/D12935
llvm-svn: 248784
This is one step towards solving PR24766:
https://llvm.org/bugs/show_bug.cgi?id=24766
We were not producing the same IR for these two C functions because the store
to the temp bool causes extra zexts:
#include <stdbool.h>
bool switchy(char x1, char x2, char condition) {
bool conditionMet = false;
switch (condition) {
case 0: conditionMet = (x1 == x2); break;
case 1: conditionMet = (x1 <= x2); break;
}
return conditionMet;
}
bool switchy2(char x1, char x2, char condition) {
switch (condition) {
case 0: return (x1 == x2);
case 1: return (x1 <= x2);
}
return false;
}
As noted in the code comments, this test case manages to avoid the more general existing
phi optimizations where there are only 2 phi inputs or where there are no constant phi
args mixed in with the casts ops. It seems like a corner case, but if we don't catch it,
then I don't think we can get SimplifyCFG to further optimize towards the canonical form
for this function shown in the bug report.
Differential Revision: http://reviews.llvm.org/D12866
llvm-svn: 248689
This is a fix for PR22723:
https://llvm.org/bugs/show_bug.cgi?id=22723
My first attempt at this was to change what I thought was the root problem:
xor (zext i1 X to i32), 1 --> zext (xor i1 X, true) to i32
...but we create the opposite pattern in InstCombiner::visitZExt(), so infinite loop!
My next idea was to fix the matchIfNot() implementation in PatternMatch, but that would
mean potentially returning a different size for the match than what was input. I think
this would require all users of m_Not to check the size of the returned match, so I
abandoned that idea.
I settled on just fixing the exact case presented in the PR. This patch does allow the
2 functions in PR22723 to compile identically (x86):
bool test(bool x, bool y) { return !x | !y; }
bool test(bool x, bool y) { return !x || !y; }
...
andb %sil, %dil
xorb $1, %dil
movb %dil, %al
retq
Differential Revision: http://reviews.llvm.org/D12705
llvm-svn: 248634
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
llvm-svn: 248368
The SSE4A instructions EXTRQ/INSERTQ only use the lower 64-bits (or less) for many of their input vector operands and all of them have undefined upper 64-bits results.
Differential Revision: http://reviews.llvm.org/D12680
llvm-svn: 247934
Summary:
`signum(x)` is sometimes implemented as `(x >> 63) | (-x >>> 63)` (for
an `i64` `x`). This change adds a matcher for that pattern, and an
instcombine rule to optimize `signum(x) s< 1`.
Later, we can also consider optimizing:
icmp slt signum(x), 0 --> icmp slt x, 0
icmp sle signum(x), 1 --> true
etc.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12703
llvm-svn: 247846
The patch extends the optimization to cases where the constant's
magnitude is so small or large that the rounding of the conversion
is irrelevant. The "so small" case includes negative zero.
Differential review: http://reviews.llvm.org/D11210
llvm-svn: 247708
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG. It also adds assertions in isKnownNonNull() and isKnownNonNullFromDominatingCondition() to make sure the value checked is pointer type (as defined in LLVM document). These assertions might trip failures in things which are not covered under llvm/test, but fixes should be pretty obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247587
Improved InstCombine support for CVTPH2PS (F16C half 2 float conversion):
<4 x float> @llvm.x86.vcvtph2ps.128(<8 x i16>) - only uses the bottom 4 i16 elements for the conversion.
Added constant folding support.
Differential Revision: http://reviews.llvm.org/D12731
llvm-svn: 247504
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247356
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of gc.relocate return value. In this way it can handle cases where the relocated value does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12772
llvm-svn: 247353
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 247271
David Majnemer