ComputeNumSignBits and computeKnownBits both trigger "Scalable flag
may be dropped" warnings when a fixed length vector is extracted
from a scalable vector. This patch assumes nothing about the
demanded elements thus matching the behaviour when extracting a
scalable vector from a scalable vector.
Differential Revision: https://reviews.llvm.org/D83642
This patch replaces some invalid calls to getVectorNumElements() with calls
to getVectorMinNumElements() instead, since the code paths changed in this
patch work for both fixed and scalable vector types.
Fixes warnings in this test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83203
Summary:
When legalizing a biscast operation from an fp16 operand to an i16 on a
target that requires both input and output types to be promoted to
32-bits, an assertion can fail when building the new node due to a
mismatch between the the operation's result size and the type specified to
the node.
This patches fix the issue by making sure the bit width of the types
match for the FP_TO_FP16 node, covering the difference with an extra
ANYEXTEND operation.
Reviewers: ostannard, efriedma, pirama, jmolloy, plotfi
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82552
Summary:
When splitting a load of a scalable type, the new address is
calculated in SplitVecRes_LOAD using a vscale and an add instruction.
This patch also adds a DAG combiner fold to visitADD for vscale:
- Fold (add (vscale(C0)), (vscale(C1))) to (add (vscale(C0 + C1)))
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: david-arm
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82792
Currently matchBinOpReduction only handles shufflevector reduction patterns, but in many cases these only occur in the final stages of a reduction, once we're down to legal vector widths.
Before this its likely that we are performing reductions using subvector extractions to repeatedly split the source vector in half and perform the binop on the halves.
Assuming we've found a non-partial reduction, this patch continues looking for subvector reductions as far as it can beyond the last shufflevector.
Fixes PR37890
Fix a warning in getNode() when extracting a subvector from a
concat vector. We can simply replace the call to getVectorNumElements
with getVectorMinNumElements as this follows the defined behaviour
for EXTRACT_SUBVECTOR.
Differential Revision: https://reviews.llvm.org/D82746
Summary:
- AssertAlign node records the guaranteed alignment on its source node,
where these alignments are retrieved from alignment attributes in LLVM
IR. These tracked alignments could help DAG combining and lowering
generating efficient code.
- In this patch, the basic support of AssertAlign node is added. So far,
we only generate AssertAlign nodes on return values from intrinsic
calls.
- Addressing selection in AMDGPU is revised accordingly to capture the
new (base + offset) patterns.
Reviewers: arsenm, bogner
Subscribers: jvesely, wdng, nhaehnle, tpr, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81711
When trying to calculate the number of sign bits for scalable vectors
we should just bail out for now and pretend we know nothing.
Differential Revision: https://reviews.llvm.org/D81093
Instead of asserting the number of elements is the same, we should be
comparing the element counts instead. In addition, when looking at
concats of extract_subvectors it's fine to use getVectorMinNumElements()
for scalable vectors.
I discovered these warnings when compiling the structured loads tests in
this file:
test/CodeGen/AArch64/sve-intrinsics-loads.ll
Differential Revision: https://reviews.llvm.org/D81936
Until we have a real need for computing known bits for scalable
vectors I have simply changed the code to bail out for now and
pretend we know nothing. I've also fixed up some simple callers of
computeKnownBits too.
Differential Revision: https://reviews.llvm.org/D80437
In two instances of CreateStackTemporary we are sometimes promoting
alignments beyond the stack alignment. I have introduced a new function
called getReducedAlign that will return the alignment for the broken
down parts of illegal vector types. For example, on NEON a <32 x i8>
type is made up of two <16 x i8> types - in this case the sensible
alignment is 16 bytes, not 32.
In the legalization code wherever we create stack temporaries I have
started using the reduced alignments instead for illegal vector types.
I added a test to
CodeGen/AArch64/build-one-lane.ll
that tries to insert an element into an illegal fixed vector type
that involves creating a temporary stack object.
Differential Revision: https://reviews.llvm.org/D80370
This wasn't getting much value from the DAG or depth arguments, since
it's only called on the frame index root nodes. FrameIndexes can also
only return a scalar value, so it also didn't need DemandedElts.
The AMDGPU non-strict fdiv lowering needs to introduce an FP mode
switch in some cases, and has custom nodes to provide chain/glue for
the intermediate FP operations. We need to propagate nofpexcept here,
but getNode was dropping the flags.
Adding nofpexcept in the AMDGPU custom lowering is left to a future
patch.
Also fix a second case where flags were dropped, but in this case it
seems it just didn't handle this number of operands.
Test will be included in future AMDGPU patch.
We are calling getValidShiftAmountConstant first followed by getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant if that failed. But both are used in the same way in ComputeNumSignBits and the Min/Max variants call getValidShiftAmountConstant internally anyhow.
Summary:
The description of EXTACT_SUBVECTOR and INSERT_SUBVECTOR has been
changed to accommodate scalable vectors (see ISDOpcodes.h). This
patch updates the asserts used to verify these requirements when
using SelectionDAG's getNode interface.
This patch introduces the MVT function getVectorMinNumElements
that can be used against fixed-length and scalable vectors when
only the known minimum vector length is required.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80709
We should be using getVectorElementCount() to assert that two types
have the same numbers of elements. I encountered the warnings while
compiling this test:
CodeGen/AArch64/sve-intrinsics-ld1.ll
Differential Revision: https://reviews.llvm.org/D80616
I have tried to ensure that SelectionDAG and DAGCombiner do
sensible things for scalable vectors, and added support for a
limited number of simple folds. Codegen support for the vector
extract patterns have also been added to the AArch64 backend.
New vector extract tests have been added here:
CodeGen/AArch64/sve-extract-element.ll
and I have also added new folds using inserts and extracts here:
CodeGen/AArch64/sve-insert-element.ll
Differential Revision: https://reviews.llvm.org/D80208
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
For now I have changed FoldConstantVectorArithmetic to return early
if we encounter a scalable vector, since the subsequent code assumes
you can perform lane-wise constant folds. However, in future work we
should be able to extend this to look at splats of a constant value
and fold those if possible. I have also added the same code to
FoldConstantArithmetic, since that deals with vectors too.
The warnings I fixed in this patch were being generated by this
existing test:
CodeGen/AArch64/sve-int-arith.ll
Differential Revision: https://reviews.llvm.org/D79421
I've created a new variant of CreateStackTemporary that takes
TypeSize and Align arguments, and made the older instances of
CreateStackTemporary call this new function. This refactoring is
in preparation for more patches in this area related to scalable
vectors and improving the alignment calculations.
Differential Revision: https://reviews.llvm.org/D79933
It sounds like an interesting idea in theory, but nothing is actually
taking advantage of it, and specifying/implementing the edge cases is
painful. So just forbid it.
Differential Revision: https://reviews.llvm.org/D79814
I have fixed up some places in SelectionDAG::getNode() where we
used to assert that the number of vector elements for two types
are the same. I have changed such cases to assert that the
element counts are the same instead. I've added new tests that
exercise the code paths for all the truncations. All the extend
operations are covered by this existing test:
CodeGen/AArch64/sve-sext-zext.ll
For the ISD::SETCC case I fixed this code path is exercised by
these existing tests:
CodeGen/AArch64/sve-fcmp.ll
CodeGen/AArch64/sve-intrinsics-int-compares-with-imm.ll
Differential Revision: https://reviews.llvm.org/D79399
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
Summary:
I have fixed several places in getSplatSourceVector and isSplatValue
to work correctly with scalable vectors. I added new support for
the ISD::SPLAT_VECTOR DAG node as one of the obvious cases we can
support with scalable vectors. In other places I have tried to do
the sensible thing, such as bail out for vector types we don't yet
support or don't intend to support.
It's not possible to add IR test cases to cover these changes, since
they are currently only ever exercised on certain targets, e.g.
only X86 targets use the result of getSplatSourceVector. I've
assumed that X86 tests already exist to test these code paths for
fixed vectors. However, I have added some AArch64 unit tests that
test the specific functions I have changed.
Differential revision: https://reviews.llvm.org/D79083
Summary:
This patch tries to ensure that we do something sensible when
generating code for the ISD::INSERT_VECTOR_ELT DAG node when operating
on scalable vectors. Previously we always returned 'undef' when
inserting an element into an out-of-bounds lane index, whereas now
we only do this for fixed length vectors. For scalable vectors it
is assumed that the backend will do the right thing in the same way
that we have to deal with variable lane indices.
In this patch I have permitted a few basic combinations for scalable
vector types where it makes sense, but in general avoided most cases
for now as they currently require the use of BUILD_VECTOR nodes.
This patch includes tests for all scalable vector types when inserting
into lane 0, but I've only included one or two vector types for other
cases such as variable lane inserts.
Differential Revision: https://reviews.llvm.org/D78992
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
Summary:
Given a VL=14 that is enveloped by a proper VL=16, splitting the
masked load using the enveloping halving VL=8/8 should yields
should eventually yield V=8/5. This fixes various assert failures
in getHalfNumVectorElementsVT() and IncrementMemoryAddress().
Note, I suspect similar fixes will be needed for other masked
operations, but for now I send out a fix for masked load only.
Bugzilla issue 45563
https://bugs.llvm.org/show_bug.cgi?id=45563
Reviewers: craig.topper, mehdi_amini, nicolasvasilache
Reviewed By: craig.topper
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78608
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary:
A Copy with a source that is zeros is the same as a Set of zeros.
This fixes the invariant that SrcAlign should always be non-null.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73791
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call.
Match the approach in SimplifyDemandedBits/ComputeNumSignBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits call.
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call, additionally we only ever need original demanded elts of the base vector even if the index is unknown.
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Add DemandedElts handling to ISD::ANY_EXTEND and add missing ISD::ANY_EXTEND_VECTOR_INREG handling. Despite the lack of test changes this code IS being used - its just that the ANY_EXTEND ops are legalized later on (typically to ZERO_EXTEND equivalents) so we typically manage to combine later on.
As mentioned by @nikic on rGef5debac4302, we can merge the guaranteed bottom zero bits from the shifted value, and then, if a min shift amount is known, zero out the bottom bits as well.
As mentioned by @nikic on rGef5debac4302 (although that was just about SHL), we can merge the guaranteed top zero bits from the shifted value, and then, if a min shift amount is known, zero out the top bits as well.
SHL tests / handling will be added in a follow up patch.
Summary:
be15dfa88f broke GlobalISel's usage of getSetCCInverse() which currently
appears to be limited to our out-of-tree backend. GlobalISel doesn't use
EVT's and isn't able to derive them from the information it has as it
doesn't distinguish between integer and floating point types (that
distinction is made by operations rather than values). Bring back the
bool version of getSetCCInverse() in a way that doesn't break the intent
of be15dfa88f but also allows GlobalISel to continue using it.
Reviewers: spatel, bogner, arichardson
Reviewed By: arichardson
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72309
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
This was increasing the number of instructions when fsub was legalized
on AMDGPU with no signed zeros enabled. This fold should be guarded by
hasOneUse, and I don't think getNode should be doing that. The same
fold is already done as a regular combine through isNegatibleForFree.
This does require duplicating, even though isNegatibleForFree does
this combine already (and properly checks hasOneUse) to avoid one PPC
regression. In the regression, the outer fneg has nsz but the fsub
operand does not. isNegatibleForFree only sees the operand, and
doesn't see it's used from a nsz context. A nsz parameter needs to be
added and threaded through isNegatibleForFree to avoid this.
SelectionDAG::transferDbgValues() can 'reattach' SDDbgValue from one to
another node, but doesn't change its source order. If the destination node has
the order greater than the SDDbgValue, there are two possible issues
revealed later:
* If debug info is attached to an instruction that is the first definition
of a register, this ends up with a def-after-use and the debug info
gets 'undef' later.
* If MIR has another definition of a register above the debug info,
the debug info may represent a source variable incorrectly because
it appears (significantly) before an instruction corresponded
to this debug info.
So, the patch changes the order of an SDDbgValue when it is moved
to a node with greater order.
Reviewers: dblaikie, jmorse, aprantl
Reviewed By: aprantl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71175
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
Summary:
This change is preparatory work to use this helper functions in more places.
In order to make this change, getMemBasePlusOffset() has been extended to
also take a SDNodeFlags parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71206
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows integer constants offsets, but there
are cases where we can use an existing SDValue parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel, craig.topper
Reviewed By: spatel, craig.topper
Subscribers: craig.topper, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71205
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows positive offsets, but there are cases
where we want to subtract an offset from an existing pointer.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71204
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
Updated pred_load patterns added to AArch64SVEInstrInfo.td by this patch
to use reg + imm non-temporal loads to fix previous test failures.
Original commit message:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Reviewers: sdesmalen, paulwalker-arm, dancgr, mgudim, efriedma, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71000
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
This is an alternative to D64662 that shares more code between
strict and non-strict nodes. It's modeled after the implementation
that I did for softening.
Differential Revision: https://reviews.llvm.org/D70867
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
Summary
In several places we need to enumerate all constrained intrinsics or IR
nodes that should be represented by them. It is easy to miss some of
the cases. To make working with these intrinsics more convenient and
robust, this change introduces file containing definitions of all
constrained intrinsics and some of their properties. This file can be
included to generate constrained intrinsics processing code.
Reviewers: kpn, andrew.w.kaylor, cameron.mcinally, uweigand
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69887
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
Similar to:
rG4c47617627fb
This makes the DAG behavior consistent with IR's insertelement.
https://bugs.llvm.org/show_bug.cgi?id=42689
I've tried to maintain test intent for AArch64 and WebAssembly
by replacing undef index operands with something else.
This makes the DAG behavior consistent with IR's extractelement after:
rGb32e4664a715
https://bugs.llvm.org/show_bug.cgi?id=42689
I've tried to maintain test intent for WebAssembly.
The AMDGPU test is trying to test for crashing or other bad behavior,
but I'm not sure if that's possible after this change.
Earlier in the year intrinsics for lrint, llrint, lround and llround were
added to llvm. The constrained versions are now implemented here.
Reviewed by: andrew.w.kaylor, craig.topper, cameron.mcinally
Approved by: craig.topper
Differential Revision: https://reviews.llvm.org/D64746
llvm-svn: 373900
Summary:
Previously IntrinsicInfo::size was an unsigned what can't represent the
64 bit value used by MemoryLocation::UnknownSize.
Reviewers: jmolloy
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68219
llvm-svn: 373214
As commented on D67557 we have a lot of uses of depth checks all using magic numbers.
This patch adds the SelectionDAG::MaxRecursionDepth constant and moves over some general cases to use this explicitly.
Differential Revision: https://reviews.llvm.org/D67711
llvm-svn: 372315
This is the first sweep of generic code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time. That will come later. See D66309 for context.
Differential Revision: https://reviews.llvm.org/D66318
llvm-svn: 371786
This implements constrained floating point intrinsics for FP to signed and
unsigned integers.
Quoting from D32319:
The purpose of the constrained intrinsics is to force the optimizer to
respect the restrictions that will be necessary to support things like the
STDC FENV_ACCESS ON pragma without interfering with optimizations when
these restrictions are not needed.
Reviewed by: Andrew Kaylor, Craig Topper, Hal Finkel, Cameron McInally, Roman Lebedev, Kit Barton
Approved by: Craig Topper
Differential Revision: http://reviews.llvm.org/D63782
llvm-svn: 370228
Copied directly from the IR version.
Most of the testcases I've added for this are somewhat problematic
because they really end up testing the yet to be implemented version
for MUL_I24/MUL_U24.
llvm-svn: 370099
If the last step in an FP add reduction allows reassociation and doesn't care
about -0.0, then we are free to recognize that computation as a reduction
that may reorder the intermediate steps.
This is requested directly by PR42705:
https://bugs.llvm.org/show_bug.cgi?id=42705
and solves PR42947 (if horizontal math instructions are actually faster than
the alternative):
https://bugs.llvm.org/show_bug.cgi?id=42947
Differential Revision: https://reviews.llvm.org/D66236
llvm-svn: 368995
Summary:
Before this patch MGATHER/MSCATTER is capable of representing all
common addressing modes, but only when illegal types are used.
This patch adds an IndexType property so more representations
are available when using legal types only.
Original modes:
vector of bases
base + vector of signed scaled offsets
New modes:
base + vector of signed unscaled offsets
base + vector of unsigned scaled offsets
base + vector of unsigned unscaled offsets
The current behaviour of addressing modes for gather/scatter remains
unchanged.
Patch by Paul Walker.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D65636
llvm-svn: 368008
Summary: Honoring no signed zeroes is also available as a user control through clang separately regardless of fastmath or UnsafeFPMath context, DAG guards should reflect this context.
Reviewers: spatel, arsenm, hfinkel, wristow, craig.topper
Reviewed By: spatel
Subscribers: rampitec, foad, nhaehnle, wuzish, nemanjai, jvesely, wdng, javed.absar, MaskRay, jsji
Differential Revision: https://reviews.llvm.org/D65170
llvm-svn: 367486
This makes the field wider than MachineOperand::SubReg_TargetFlags so that
we don't end up silently truncating any higher bits. We should still catch
any bits truncated from the MachineOperand field as a consequence of the
assertion in MachineOperand::setTargetFlags().
Differential Revision: https://reviews.llvm.org/D65465
llvm-svn: 367474
If anything called the recursive isKnownNeverNaN/computeKnownBits/ComputeNumSignBits/SimplifyDemandedBits/SimplifyMultipleUseDemandedBits with an incorrect depth then we could continue to recurse if we'd already exceeded the depth limit.
This replaces the limit check (Depth == 6) with a (Depth >= 6) to make sure that we don't circumvent it.
This causes a couple of regressions as a mixture of calls (SimplifyMultipleUseDemandedBits + combineX86ShufflesRecursively) were calling with depths that were already over the limit. I've fixed SimplifyMultipleUseDemandedBits to not do this. combineX86ShufflesRecursively is trickier as we get a lot of regressions if we reduce its own limit from 8 to 6 (it also starts at Depth == 1 instead of Depth == 0 like the others....) - I'll see what I can do in future patches.
llvm-svn: 367171
Eventually all of these will be moved over, but we create nodes in GetDemandedBits recursion at the moment which causes regressions when we try to remove them all.
llvm-svn: 367092
This patch adds support for recognizing cases where a larger vector type is being used to reduce just the elements in the lower subvector:
e.g. <8 x i32> reduction pattern in a <16 x i32> vector:
<4,5,6,7,u,u,u,u,u,u,u,u,u,u,u,u>
<2,3,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
<1,u,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
matchBinOpReduction returns the lower extracted subvector in such cases, assuming isExtractSubvectorCheap accepts the extraction.
I've only enabled it for X86 reduction sums so far. I intend to enable it for the bitop/minmax cases in future patches, and eventually I think its worth turning it on all the time. This is mainly just a case of ensuring calls to matchBinOpReduction don't make assumptions on the vector width based on the original vector extraction.
Fixes the x86 partial reduction sum cases in PR33758 and PR42023.
Differential Revision: https://reviews.llvm.org/D65047
llvm-svn: 366933
If we are already using the same chain for the old/new memory ops then just return.
Fixes PR42727 which had getLoad() reusing an existing node.
llvm-svn: 366922
When a target intrinsic has been determined to touch memory, we construct a MachineMemOperand during SDAG construction. In this case, we should propagate AAMDNodes metadata to the MachineMemOperand where available.
Differential revision: https://reviews.llvm.org/D64131
llvm-svn: 365043
Summary:
(Not so) boringly identical to pattern a (D62786)
Not yet sure how do deal with the last pattern c.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62793
llvm-svn: 364418
Use matchBinaryPredicate instead of isConstOrConstSplat to let us handle non-uniform shift cases.
This requires us to tweak matchBinaryPredicate to allow it to (optionally) handle constants with different type widths.
llvm-svn: 363792
This is already done in DAGCombiner::visitINSERT_SUBVECTOR, but this helps a number of shuffles across different vector widths recognise when they come from the same source.
llvm-svn: 363542
As I mentioned on D61887 we don't get many hits on ComputeNumSignBits as we did on computeKnownBits.
The case we do get is interesting though - it allows us to use the 'ConditionalNegate' combine in combineLogicBlendIntoPBLENDV to remove a select.
It comes too late for SSE41 (BLENDV) cases, but SSE2 tests can hit it now. We should probably try to make use of this for SSE41+ targets as well - avoiding variable blends is usually a good idea. I'll investigate as a followup.
Differential Revision: https://reviews.llvm.org/D62777
llvm-svn: 362486
We were missing this fold in the DAG, which I've copied directly from llvm::ConstantFoldCastInstruction
Differential Revision: https://reviews.llvm.org/D62807
llvm-svn: 362397
Add (opt-in) support for implicit truncation to isConstOrConstSplat, which allows us to match truncated 'all ones' cases in isBitwiseNot.
PR41020 compares against using ISD::isBuildVectorAllOnes() instead, but that predicate silently accepts any UNDEF elements in the build vector which might not be what we want in isBitwiseNot - so I've added an opt-in 'AllowUndefs' flag that is set to false by default but will allow us to enable it on individual cases where its safe.
Differential Revision: https://reviews.llvm.org/D62783
llvm-svn: 362323
Just copy all of the operands except the chain and call MorphNode on that.
This removes the IsUnary and IsTernary flags.
Also always get the result type from the result type of the original
nodes. Previously we got it from the operand except for two nodes
where that didn't work.
llvm-svn: 362269
This is derived from the related fold for build vectors.
We also have a version of this in DAGCombiner. The benefit of
having this fold at node creation time is (1) efficiency and
(2) preventing infinite looping from creating patterns that
should not exist in the first place.
Currently, the inf-loop could happen with MergeConsecutiveStores()
because it naively creates concat of extracts when forming a wider
vector store. That could fight with target-specific store narrowing.
llvm-svn: 361780
There's a possible missing fold here for extracting from the
same source vector. It's similar to a check that we use to
squash a build vector with all extracted elements from the
same source vector.
llvm-svn: 361778
The DemandedElts variable is pretty much inert at the moment - the original GetDemandedBits implementation calls it with an 'all ones' DemandedElts value so the function is active and behaves exactly as it used to.
llvm-svn: 361773
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
DAGCombiner simplifies this more liberally as:
// If inserting an UNDEF, just return the original vector.
if (N1.isUndef())
return N0;
So there's no way to make this visible in output AFAIK, but
doing this at node creation time should be slightly more efficient.
llvm-svn: 361287
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Before this change, they were erroneously constructed with the EH_LABEL
SDNode opcode, which caused other passes to interact with them in
incorrect ways. See the FIXME about fastisel that this addresses in the
existing test case.
Fixes PR41890
llvm-svn: 360818
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
This is extracted from the original draft of D61419 with some additional tests.
We don't currently get this in IR (it's conservatively turned into a NaN),
but presumably that'll get updated as we add real IR support for 'fneg'
rather than 'fsub -0.0, x'.
The x86-32 run shows the following, and I haven't looked further to see why,
but that seems to be independent:
Legalizing: t1: f32 = undef
Trying to expand node
Creating fp constant: t4: f32 = ConstantFP<0.000000e+00>
Differential Revision: https://reviews.llvm.org/D61516
llvm-svn: 360296
As a result of the underlying cause of PR41678 we created an ANY_EXTEND node with a scalar result type and v1i1 input type. Ideally we would have asserted for this instead of letting it go through to instruction selection and generate bad machine IR
Differential Revision: https://reviews.llvm.org/D61463
llvm-svn: 359836
We don't have FP exception limits in the IR constant folder for the binops (apart from strict ops),
so it does not make sense to have them here in the DAG either. Nothing else in the backend tries
to preserve exceptions (again outside of strict ops), so I don't see how this could have ever
worked for real code that cares about FP exceptions.
There are still cases (examples: unary opcodes in SDAG, FMA in IR) where we are trying (at least
partially) to preserve exceptions without even asking if the target supports FP exceptions. Those
should be corrected in subsequent patches.
Real support for FP exceptions requires several changes to handle the constrained/strict FP ops.
Differential Revision: https://reviews.llvm.org/D61331
llvm-svn: 359791
In preparation for supporting ILP32 on AArch64, this modifies the SelectionDAG
builder code so that pointers are allowed to have a larger type when "live" in
the DAG compared to memory.
Pointers get zero-extended whenever they are loaded, and truncated prior to
stores. In addition, a few not quite so obvious locations need updating:
* A GEP that has not been marked inbounds needs to enforce the IR-documented
2s-complement wrapping at the memory pointer size. Inbounds GEPs are
undefined if they overflow the address space, so no additional operations
are needed.
* Signed comparisons would give incorrect results if performed on the
zero-extended values.
This shouldn't affect CodeGen for now, but will become active when the AArch64
ILP32 support is committed.
llvm-svn: 359676
We don't have this restriction in IR, so it should not be here
either simply out of consistency. Code that wants to handle FP
exceptions is expected to use the 'strict' variants of these
nodes.
We don't get the frem case because frem by 0.0 produces NaN (invalid),
and that's the remaining check here (so the removed check for frem
was dead code AFAIK).
This is the only place in SDAG that uses "HasFPExceptions", so I
think we should remove that entirely as a follow-up patch.
llvm-svn: 359566
This was a local static funtion in SelectionDAG, which I've promoted to
TargetLowering so that I can reuse it to estimate the cost of a memory
operation in D59787.
Differential Revision: https://reviews.llvm.org/D59766
llvm-svn: 359543
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
These are general queries, so they should not die when given
a degenerate input like an all undef mask. Callers should be
able to deal with an op that will eventually be simplified away.
llvm-svn: 358761
The arm64_32 ABI specifies that pointers (despite being 32-bits) should be
zero-extended to 64-bits when passed in registers for efficiency reasons. This
means that the SelectionDAG needs to be able to tell the backend that an
argument was originally a pointer, which is implmented here.
Additionally, some memory intrinsics need to be declared as taking an i8*
instead of an iPTR.
There should be no CodeGen change yet, but it will be triggered when AArch64
backend support for ILP32 is added.
llvm-svn: 358398
Summary:
Use KnownBits::computeForAddSub/computeForAddCarry
in SelectionDAG::computeKnownBits when doing value
tracking for addition/subtraction.
This should improve the precision of the known bits,
as we only used to make a simple estimate of known
zeroes. The KnownBits support functions are also
able to deduce bits that are known to be one in the
result.
Reviewers: spatel, RKSimon, nikic, lebedev.ri
Reviewed By: nikic
Subscribers: nikic, javed.absar, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60460
llvm-svn: 358372
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
llvm-svn: 358113
Second half of PR40800, this patch adds DAG undef handling to fcmp instructions to match the behavior in llvm::ConstantFoldCompareInstruction, this permits constant folding of vector comparisons where some elements had been reduced to UNDEF (by SimplifyDemandedVectorElts etc.).
This involves a lot of tweaking to reduced tests as bugpoint loves to reduce fcmp arguments to undef........
Differential Revision: https://reviews.llvm.org/D60006
llvm-svn: 357765
Summary:
Teach SelectionDAG how to compute known bits of ISD::CopyFromReg if
the virtual reg used has one def only.
This can be particularly useful when calling isBaseWithConstantOffset()
with the ISD::CopyFromReg argument, as more optimizations may get enabled
in the result.
Also add a missing truncation on X86, found by testing of this patch.
Change-Id: Id1c9fceec862d118c54a5b53adf72ada5d6daefa
Reviewers: bogner, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: lebedev.ri, nemanjai, jvesely, nhaehnle, javed.absar, jsji, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59535
llvm-svn: 357745
Summary:
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations without fully pruning unused result values. This results
in nodes that are never added to the worklist and therefore can not be
pruned.
Add a node inserter for the combiner to make sure such nodes have the
chance of being pruned. This allows a number of additional peephole
optimizations.
Reviewers: efriedma, RKSimon, craig.topper, jyknight
Reviewed By: jyknight
Subscribers: msearles, jyknight, sdardis, nemanjai, javed.absar, hiraditya, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58068
llvm-svn: 357279
We have the folds for fadd/fsub/fmul already in DAGCombiner,
so it may be possible to remove that code if we can guarantee that
these ops are zapped before they can exist.
llvm-svn: 357029
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations or not fully pruning unused result values. This can
result in nodes that are never added to the worklist and therefore can
not be pruned.
Add a node inserter as the current node deleter to make sure such
nodes have the chance of being pruned.
Many minor changes, mostly positive.
llvm-svn: 356996
First half of PR40800, this patch adds DAG undef handling to icmp instructions to match the behaviour in llvm::ConstantFoldCompareInstruction and SimplifyICmpInst, this permits constant folding of vector comparisons where some elements had been reduced to UNDEF (by SimplifyDemandedVectorElts etc.).
This involved a lot of tweaking to reduced tests as bugpoint loves to reduce icmp arguments to undef........
Differential Revision: https://reviews.llvm.org/D59363
llvm-svn: 356938
AMDGPU would like to have MVTs for v3i32, v3f32, v5i32, v5f32. This
commit does not add them, but makes preparatory changes:
* Exclude non-legal non-power-of-2 vector types from ComputeRegisterProp
mechanism in TargetLoweringBase::getTypeConversion.
* Cope with SETCC and VSELECT for odd-width i1 vector when the other
vectors are legal type.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58899
Change-Id: Ib5f23377dbef511be3a936211a0b9f94e46331f8
llvm-svn: 356350
First step towards PR40800 - I intend to move the float case in a separate future patch.
I had to tweak the (overly reduced) thumb2 test and the x86 widening test change is annoying (no longer rematerializable) but we should address this separately.
Differential Revision: https://reviews.llvm.org/D59244
llvm-svn: 356040
Summary:
The description of KnownBits::zext() and
KnownBits::zextOrTrunc() has confusingly been telling
that the operation is equivalent to zero extending the
value we're tracking. That has not been true, instead
the user has been forced to explicitly set the extended
bits as known zero afterwards.
This patch adds a second argument to KnownBits::zext()
and KnownBits::zextOrTrunc() to control if the extended
bits should be considered as known zero or as unknown.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58650
llvm-svn: 355099
These helpers extend the existing isConstOrConstSplat helper checks to support DemandedElts masks as well.
We already had a local version of this in SelectionDAG that computeKnownBits/ComputeNumSignBits made use of, but this adds the functionality directly to the BuildVectorSDNode node and extends isConstOrConstSplat etc. to use that.
This will allow us to reuse the functionality in SimplifyDemandedVectorElts/SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D58503
llvm-svn: 354797
Summary:
When promoting the over flow vector for these ops we should use the target's desired setcc result type. This way a v8i32 result type will use a v8i32 overflow vector instead of a v8i16 overflow vector. A v8i16 overflow vector will cause LegalizeDAG/LegalizeVectorOps to have to use v8i32 and truncate to v8i16 in its expansion. By doing this in type legalization instead, we get the truncate into the DAG earlier and give DAG combine more of a chance to optimize it.
We also have to fix unrolling to use the scalar setcc result type for the scalarized operation, and convert it to the required vector element type after the scalar operation. We have to observe the vector boolean contents when doing this conversion. The previous code was just taking the scalar result and putting it in the vector. But for X86 and AArch64 that would have only put a the boolean value in bit 0 of the element and left all other bits in the element 0. We need to ensure all bits in the element are the same. I'm using a select with constants here because that's what setcc unrolling in LegalizeVectorOps used.
Reviewers: spatel, RKSimon, nikic
Reviewed By: nikic
Subscribers: javed.absar, kristof.beyls, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58567
llvm-svn: 354753
If the LHS has known zeros, then the RHS immediate mask might have been simplified to remove those bits.
This patch adds a call to computeKnownBits to get the known zeroes to handle that possibility. I left an early out to skip the call if all of the demanded bits are set in the mask.
Differential Revision: https://reviews.llvm.org/D58464
llvm-svn: 354514
Second part of https://bugs.llvm.org/show_bug.cgi?id=40442.
This adds an extra UnrollVectorOverflowOp() method to SDAG, because
the general UnrollOverflowOp() method can't deal with multiple results.
Additionally we need to expand UMULO/SMULO during vector op
legalization, as it may result in unrolling, which may need additional
type legalization.
Differential Revision: https://reviews.llvm.org/D57997
llvm-svn: 354513
If the bit position has known zeros in it, then the AND immediate will likely be optimized to remove bits.
This can prevent GetDemandedBits from recognizing that the AND is unnecessary.
llvm-svn: 354498
Summary:
A store to an object whose lifetime is about to end can be removed.
See PR40550 for motivation.
Reviewers: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57541
llvm-svn: 354244
For D57601, we need to know whether the instruction is volatile. We'd either have to pass yet another parameter, or just standardize on the MMO interface. I chose the second.
llvm-svn: 353989
The helper function was used by only two callers, and largely ended up providing distinct functionality based on optional arguments and opcode. Inline and simply to make the functionality much more clear.
llvm-svn: 353977
The version of FoldConstantArithmetic() that takes arbitrary nodes
was confusingly naming those nodes as constants when they might
not be; also "Cst" reads like "Cast".
llvm-svn: 352884
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This functionality is required at multiple places which potentially
create large operand lists, like SelectionDAGBuilder or DAGCombiner.
Differential Revision: https://reviews.llvm.org/D56739
llvm-svn: 351552
Summary:
Use this helper to make sure we use the same value at various places.
This will likely be needed at more places were we currently crash
because we use more operands than possible.
Also makes it easier to change in the future.
Reviewers: RKSimon, craig.topper, efriedma, aemerson
Reviewed By: RKSimon
Subscribers: hiraditya, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D56859
llvm-svn: 351537
The value returned by max() is the last valid value, adjust the
comparison accordingly.
The code added in D55073 creates TokenFactors with max() operands.
Reviewers: aemerson, efriedma, RKSimon, craig.topper
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D56738
llvm-svn: 351318
This adds support for calculating sign bits of insert_subvector. I based it on the computeKnownBits.
My motivating case is propagating sign bits information across basic blocks on AVX targets where concatenating using insert_subvector is common.
Differential Revision: https://reviews.llvm.org/D56283
llvm-svn: 350432
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts is simplifying vector elements, we're seeing more constant BUILD_VECTOR containing undefs.
This patch provides opt-in support for UNDEF elements in matchBinaryPredicate, passing NULL instead of the result ConstantSDNode* argument.
Differential Revision: https://reviews.llvm.org/D55822
llvm-svn: 349628
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts are simplifying vector elements, we're seeing more constant BUILD_VECTOR containing UNDEFs.
This patch provides opt-in handling of UNDEF elements in matchUnaryPredicate, passing NULL instead of the ConstantSDNode* argument.
I've updated SelectionDAG::simplifyShift to demonstrate its use.
Differential Revision: https://reviews.llvm.org/D55819
llvm-svn: 349616
The assertion type is always supposed to be a scalar type. So if the result VT of the assertion is a vector, we need to get the scalar VT before we can compare them.
Similarly for the assert above it.
I don't have a test case because I don't know of any place we violate this today. A coworker found this while trying to use r347287 on the 6.0 branch without also having r336868
llvm-svn: 349390
Also exposes an issue in DAGCombiner::visitFunnelShift where we were assuming the shift amount had the result type (after legalization it'll have the targets shift amount type).
llvm-svn: 349298
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 349016
This patch introduces a generic function to determine whether a given vector type is known to be a splat value for the specified demanded elements, recursing up the DAG looking for BUILD_VECTOR or VECTOR_SHUFFLE splat patterns.
It also keeps track of the elements that are known to be UNDEF - it returns true if all the demanded elements are UNDEF (as this may be useful under some circumstances), so this needs to be handled by the caller.
A wrapper variant is also provided that doesn't take the DemandedElts or UndefElts arguments for cases where we just want to know if the SDValue is a splat or not (with/without UNDEFS).
I had hoped to completely remove the X86 local version of this function, but I'm seeing some regressions in shift/rotate codegen that will take a little longer to fix and I hope to get this in sooner so I can continue work on PR38243 which needs more capable splat detection.
Differential Revision: https://reviews.llvm.org/D55426
llvm-svn: 348953
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 348843
This is a fix for PR39896, where dbg.value's of SDNodes that have been
optimised out do not lead to "DBG_VALUE undef" instructions being created.
Such undef instructions are necessary to terminate earlier variable
ranges, otherwise variable values leak past the point where they're valid.
The "invalidated" flag of SDDbgValue is currently being abused to mean two
things:
* The corresponding SDNode is now invalid
* This SDDbgValue should not be emitted
Of which there are several legitimate combinations of meaning:
* The SDNode has been invalidated and we should emit "DBG_VALUE undef"
* The SDNode has been invalidated but the debug data was salvaged, don't
emit anything for this SDDbgValue
* This SDDbgValue has been emitted
This patch introduces distinct "Emitted" and "Invalidated" fields to the
SDDbgValue class, updates users accordingly, and generates "undef"
DBG_VALUEs for invalidated records. Awkwardly, there are circumstances
where we emit SDDbgValue's twice, specifically DebugInfo/X86/dbg-addr-dse.ll
which I've preserved.
Differential Revision: https://reviews.llvm.org/D55372
llvm-svn: 348751
These nodes should have two results. A real VT and a Glue. But this code would have returned Undef which would only be a single result. But we're in the single result version of getNode so these opcodes should never be seen by this function anyway.
llvm-svn: 348670
There's a 64k limit on the number of SDNode operands, and some very large
functions with 64k or more loads can cause crashes due to this limit being hit
when a TokenFactor with this many operands is created. To fix this, create
sub-tokenfactors if we've exceeded the limit.
No test case as it requires a very large function.
rdar://45196621
Differential Revision: https://reviews.llvm.org/D55073
llvm-svn: 348324
This makes the SDAG behavior consistent with the way we do this in IR.
It's possible that we were getting the wrong answer before. For example,
'xor undef, undef --> 0' but 'xor undef, C' --> undef.
But the most practical improvement is likely as shown in the tests here -
for FP, we were overconstraining undef lanes to NaN, and that can prevent
vector simplifications/narrowing (see D51553).
llvm-svn: 348090
rL347502 moved the null sibling, so we should group all of these
together. I'm not sure why these aren't methods of the SDValue
class itself, but that's another patch if that's possible.
llvm-svn: 347523
...and use them to avoid creating obviously undef values as
discussed in the post-commit thread for r347478.
The diffs in vector div/rem show that we were missing real
optimizations by creating bogus shift nodes.
llvm-svn: 347502
Sadly, this duplicates (twice) the logic from InstSimplify. There
might be some way to at least share the DAG versions of the code,
but copying the folds seems to be the standard method to ensure
that we don't miss these folds.
Unlike in IR, we don't run DAGCombiner to fixpoint, so there's no
way to ensure that we do these kinds of simplifications unless the
code is repeated at node creation time and during combines.
There were other tests that would become worthless with this
improvement that I changed as pre-commits:
rL347161
rL347164
rL347165
rL347166
rL347167
I'm not sure how to salvage the remaining tests (diffs in this patch).
So the x86 tests verify that the new code is working as intended.
The AMDGPU test is actually similar to my motivating case: we have
some undef value that has survived to machine IR in an x86 test, and
then it gets folded in some weird way, or we crash if we don't transfer
the undef flag. But we would have been better off never getting to that
point by doing these simplifications.
This will lead back to PR32023 someday...
https://bugs.llvm.org/show_bug.cgi?id=32023
llvm-svn: 347170
Simon Pilgrim