Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm, ronlieb
Differential Revision: https://reviews.llvm.org/D114652
SIInstrInfo::FoldImmediate tried to delete move-immediate instructions
after folding them into their only use. This did not work because it was
checking hasOneNonDBGUse after doing the fold, at which point there
should be no uses. This seems to have no effect on codegen, it just
means less stuff for DCE to clean up later.
Differential Revision: https://reviews.llvm.org/D120815
In convertToThreeAddress handle VOP2 mac/fmac instructions with a
literal src0 operand, since these are prime candidates for
converting to madmk/fmamk.
Previously this would only happen if src0 (or src1) was a register
defined by a move-immediate instruction, but in many cases these
operands have already been folded because SIFoldOperands runs
before TwoAddressInstructionPass.
Differential Revision: https://reviews.llvm.org/D120736
Handle V_MAC_LEGACY_F32 and V_FMAC_LEGACY_F32 in
convertToThreeAddress, to avoid the need for an extra mov
instruction in some cases.
Differential Revision: https://reviews.llvm.org/D120704
Move MFMA handling to the top of convertToThreeAddress and pull
IsF16 calculation out of the switch. I think this makes it clearer
exactly which mac/fmac opcodes are handled, since they are now
listed in the switch with minimal extra clutter.
Differential Revision: https://reviews.llvm.org/D120703
Found by code inspection. I don't think it makes a difference with
current codegen, because if any source modifiers were present we
would have selected mad/fma instead of mac/fmac in the first place.
Differential Revision: https://reviews.llvm.org/D120709
Same as on vgpr copies, we cannot kill the source register if it
overlaps with the destination register. Otherwise, the kill of the
source register will also count as a kill for the destination register.
Differential Revision: https://reviews.llvm.org/D120042
We need to guarantee cheap copies between AGPRs, and unfortunately
gfx908 cannot directly do this. Theoretically we could set the
scavenger up with an emergency spill slot, but it also feels
unreasonable to pay that cost for what was assumed to be a simple and
cheap copy. Pick a register that doesn't conflict with any ABI
registers.
This does not address the same issue when copying from SGPR to AGPR
for gfx90a (this coincidentally fixes it for gfx908), but that's less
interesting since the register allocator shouldn't be proactively
introducing such copies.
One edge case I'm worried about is respecting the VGPR budget implied
by amdgpu-waves-per-eu. If the theoretical upper bound of a function
is 32 VGPRs, this will force the actual count to be 33.
This is also broken if inline assembly uses/defs something in v32. The
coalescer will eliminate the intermediate vreg between the def and
use, and the introduced copy will clobber the user value.
(cherry picked from commit 3335784ac2d587ff4eac04586e189532ae8b2607)
Conversatively allow hoisting/sinking of VALU comparisons.
If the result of a comparison is masked with exec, narrowing the
set of active lanes, then it is safe to hoist it as the masking
instruction will never by hoisted.
Heuristically this is also true for sinking, as we do not expect
the result of a sunk comparison that is masked with exec to be
used outside of the loop.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D118975
The WWM register has unmodeled register liveness, For v_set_inactive_*,
clobberring source register is dangerous because it will overwrite the
inactive lanes. When the source vgpr is dead at v_set_inactive_lane,
the inactive lanes may be not really dead. This may make common
optimizations doing wrong.
For example in a simple if-then cfg in Machine IR:
bb.if:
%src =
bb.then:
%src1 = COPY %src
%dst = V_SET_INACTIVE %src1(tied-def 0), %inactive
bb.end
... = PHI [0, %bb.then] [%src, %bb.if]
The register coalescer will think it is safe to optimize "%src1 = COPY %src"
in bb.then. And at the same time, there is no interference for the PHI in
bb.end. The source and destination values of the PHI will be assigned
the same register. The single PHI register will be overwritten by the
v_set_inactive, then we would get wrong value in bb.end.
With this change, we will copy the content of the source register before
setting inactive lanes after register allocation. Yes, this will sacrifice
the WWM code generation a little, but I don't have any better idea to do things
correctly.
Differential Revision: https://reviews.llvm.org/D117482
This allows us to set the noclobber flag on (the MMO of) a load
instruction instead of on the pointer. This fixes a bug where noclobber
was being applied to all loads from the same pointer, even if some of
them were clobbered.
Differential Revision: https://reviews.llvm.org/D118775
Form the MAI spec: It’s ok that Src_C and vDst are the exact same VGPRs
or Src_C and vDst are completely separated. The case that Src_C and vDst
are overlapping should be avoid as new value could be written to accumulator
input before it gets read.
Note that this inevitably increases register pressure to the point where
some programs will become uncompilable.
This patch separates MAC and FMA versions of MFMA instructions using either
tied dst and src2 or earlyclobber dst.
Fixes: SWDEV-318900
Differential Revision: https://reviews.llvm.org/D117844
Compares, v_cndmask_b32, and v_readfirstlane_b32 use EXEC
in a way which modifies the result. This implicit EXEC use
shall not be ignored for the purposes of instruction moves.
Differential Revision: https://reviews.llvm.org/D117814
Arbitrary stack pointers are accessed using MUBUF instructions with
the voffset field, which is interpreted as the swizzled address. We
want to fold fold into the MUBUF form to use the SP in the SGPR
offset, and previously we were special casing the interpretation of
the pointer value if the access memory operand said it was relative to
the stack pointer.
690f5b7a01 removed this check, and moved
the DAG path to special casing copies from SGPRs. This is not an
entirely sound approach, since it's still changing the interpretation
of pointer values based the context.
Introduce a new pseudo which corresponds to the wave-to-vector address
transform. This way the memory instruction has consistent semantics
where the incoming pointer is always interpreted as a vector address,
and we're not obligated to optimize into the MUBUF offset-only
addressing mode. The DAG should probably have an equivalent pseudo.
This should fix some correctness issues, and folding this into
addressing modes will be a future optimization patch.
This reverts commit 640beb38e7.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ifc167b3c2dae7a65920676f22a97ba76485f3456
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D116686
Change-Id: I1abf49b74a7e2ba0e0205f747a4154a468b9d7f2
This reverts commit 640beb38e7.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ibf8e397df94001f248fba609f072088a46abae08
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D115960
Change-Id: Id169459ce4dfffa857d5645a0af50b0063ce1105
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D114652
This is an optimization, but also fixes a compile failure when no free
VGPRs are available. The problem still exists for gfx908 where a
scratch register is still required. This also still exists for the
SGPR to AGPR case.
Teach convertToThreeAddress to use the V_FMA_F16_gfx9 pseudo (i.e. the
standard instruction in GFX9 onwards) instead of V_FMA_F16 (the legacy
pseudo for GFX8 compatibility, which is no longer supported in GFX10).
This follows the example of macToMad in SIFoldOperands.
Differential Revision: https://reviews.llvm.org/D115731
While enabling vector superclasses with D109301,
the AV spills are converted into VGPR spills by
introducing appropriate copies. The whole thing
ended up adding two instructions per spill (a copy
+ vgpr spill pseudo) and caused an incorrect
liverange update during inline spiller.
This patch adds the pseudo instructions for all
AV spills from 32b to 1024b and handles them in
the way all other spills are lowered.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D115439
Two-address pass works right before RA and if an immediate
was folded into an instruction there is nothing to remove
the dead def. We end up with something like:
v_mov_b32_e32 v14, 0xc1700000
v_mov_b32_e32 v14, 0x41200000
v_fmaak_f32 v51, s67, v19, 0xc1700000
v_fmaak_f32 v38, v51, v19, 0x4120000
The patch kills the dead move instruction right in the folding.
Differential Revision: https://reviews.llvm.org/D114999
Greedy register allocator prefers to move a constrained
live range into a larger allocatable class over spilling
them. This patch defines the necessary superclasses for
vector registers. For subtargets that support copy between
VGPRs and AGPRs, the vector register spills during regalloc
now become just copies.
Reviewed By: rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D109301
The combined vector register classes with both
VGPRs and AGPRs are currently unallocatable.
This patch turns them into allocatable as a
prerequisite to enable copy between VGPR and
AGPR registers during regalloc.
Also, added the missing AV register classes from
192b to 1024b.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D109300
NFCI. Previously the implicit use was added to V_MOV_B32_indirect_read
when building the instruction. V_MOV_B32_indirect_write didn't have an
implicit use of M0 at all, but apparently it did not cause any problems.
Differential Revision: https://reviews.llvm.org/D114239
Introduce V_MOV_B32_indirect_read for indexed vgpr reads
(and rename the old V_MOV_B32_indirect to
V_MOV_B32_indirect_write) so they can be unambiguously
distinguished from regular V_MOV_B32_e32. Previously they
were distinguished by looking for extra implicit operands
but this is fragile because regular moves sometimes have
extra implicit operands too:
- either by accident, when instructions end up with
duplicate implicit operands (see e.g. D100939)
- or by design, when SIInstrInfo::copyPhysReg breaks a
multi-dword copy into individual subreg mov instructions
and adds implicit operands for the super-register.
The effect of this is that SIInstrInfo::isFoldableCopy can
be simplified and identifies more foldable copies. The test
diffs show that more immediate 0 values have been folded as
inline operands.
SIInstrInfo::isReallyTriviallyReMaterializable could
probably be simplified too but that is not part of this
patch.
Differential Revision: https://reviews.llvm.org/D114230
Delegate updating of LiveIntervals to each target's
convertToThreeAddress implementation, instead of repairing LiveIntervals
after the fact in TwoAddressInstruction::convertInstTo3Addr.
Differential Revision: https://reviews.llvm.org/D113493
NFC. This check mainly handles size affecting literals. Make it check all
explicit operands instead of a few by name. Also make the isLiteral
check handle the KIMM operands, see https://reviews.llvm.org/D111067
Change-Id: I1a362d55b2a10f5c74d445272e8b7829a8b77597
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D113318
Change-Id: Ie6c688f30a71e0335d1c6dd1ff65019bd7ce684e
- When an unconditional branch is expanded into an indirect branch, if
there is no scavenged register, an SGPR pair needs spilling to enable
the destination PC calculation. In addition, before jumping into the
destination, that clobbered SGPR pair need restoring.
- As SGPR cannot be spilled to or restored from memory directly, the
spilling/restoring of that SGPR pair reuses the regular SGPR spilling
support but without spilling it into memory. As that spilling and
restoring points are fully controlled, we only need to spill that SGPR
into the temporary VGPR, which needs spilling into its emergency slot.
- The target-specific hook is revised to take additional restore block,
where the restoring code is filled. After that, the relaxation will
place that restore block directly before the destination block and
insert an unconditional branch in any fall-through block into the
destination block.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D106449
D106408 was doing this for all targets although it was
reverted due to couple performance regressions on some targets.
The difference for AMDGPU is the ability to rematerialize SOP
instructions with virtual register uses like we already do for VOP.
Differential Revision: https://reviews.llvm.org/D110743
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
Without this change _term instructions can be removed during
critical edge splitting.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D111126
This simplifies the API and addresses a FIXME in
TwoAddressInstructionPass::convertInstTo3Addr.
Differential Revision: https://reviews.llvm.org/D110229
Use GCNHazardRecognizer in postra sched.
Updated tests for the new schedules.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109536
Change-Id: Ia86ba2ae168f12fb34b4d8efdab491f84d936cde
Stanislav Mekhanoshin