The bug is that I didn't check whether the operand of the invariant_loads were themselves invariant. I don't know how this got missed in the patch and review. I even had an unreduced test case locally, and I remember handling this case, but I must have lost it in one of the rebases. Oops.
llvm-svn: 358688
The purpose of this patch is to eliminate a pass ordering dependence between LoopPredication and LICM. To understand the purpose, consider the following snippet of code inside some loop 'L' with IV 'i'
A = _a.length;
guard (i < A)
a = _a[i]
B = _b.length;
guard (i < B);
b = _b[i];
...
Z = _z.length;
guard (i < Z)
z = _z[i]
accum += a + b + ... + z;
Today, we need LICM to hoist the length loads, LoopPredication to make the guards loop invariant, and TrivialUnswitch to eliminate the loop invariant guard to establish must execute for the next length load. Today, if we can't prove speculation safety, we'd have to iterate these three passes 26 times to reduce this example down to the minimal form.
Using the fact that the array lengths are known to be invariant, we can short circuit this iteration. By forming the loop invariant form of all the guards at once, we remove the need for LoopPredication from the iterative cycle. At the moment, we'd still have to iterate LICM and TrivialUnswitch; we'll leave that part for later.
As a secondary benefit, this allows LoopPred to expose peeling oppurtunities in a much more obvious manner. See the udiv test changes as an example. If the udiv was not hoistable (i.e. we couldn't prove speculation safety) this would be an example where peeling becomes obviously profitable whereas it wasn't before.
A couple of subtleties in the implementation:
- SCEV's isSafeToExpand guarantees speculation safety (i.e. let's us expand at a new point). It is not a precondition for expansion if we know the SCEV corresponds to a Value which dominates the requested expansion point.
- SCEV's isLoopInvariant returns true for expressions which compute the same value across all iterations executed, regardless of where the original Value is located. (i.e. it can be in the loop) This implies we have a speculation burden to prove before expanding them outside loops.
- invariant_loads and AA->pointsToConstantMemory are two cases that SCEV currently does not handle, but meets the SCEV definition of invariance. I plan to sink this part into SCEV once this has baked for a bit.
Differential Revision: https://reviews.llvm.org/D60093
llvm-svn: 358684
Reverse the checking of the domiance order so that when a self compare happens,
it returns false. This makes compare function have strict weak ordering.
llvm-svn: 358636
This patch adds a basic loop fusion pass. It will fuse loops that conform to the
following 4 conditions:
1. Adjacent (no code between them)
2. Control flow equivalent (if one loop executes, the other loop executes)
3. Identical bounds (both loops iterate the same number of iterations)
4. No negative distance dependencies between the loop bodies.
The pass does not make any changes to the IR to create opportunities for fusion.
Instead, it checks if the necessary conditions are met and if so it fuses two
loops together.
The pass has not been added to the pass pipeline yet, and thus is not enabled by
default. It can be run stand alone using the -loop-fusion option.
Differential Revision: https://reviews.llvm.org/D55851
llvm-svn: 358607
In InstCombine, we use an idiom of "store i1 true, i1 undef" to indicate we've found a path which we've proven unreachable. We can't actually insert the unreachable instruction since that would require changing the CFG. We leave that to simplifycfg later.
This just factors out that idiom creation so we don't duplicate the same mostly undocument idiom creation in multiple places.
llvm-svn: 358600
Summary:
In the following cases, unrolling can be beneficial, even when
optimizing for code size:
1) very low trip counts
2) potential to constant fold most instructions after fully unrolling.
We can unroll in those cases, by setting the unrolling threshold to the
loop size. This might highlight some cost modeling issues and fixing
them will have a positive impact in general.
Reviewers: vsk, efriedma, dmgreen, paquette
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D60265
llvm-svn: 358586
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
This patch adds a basic loop fusion pass. It will fuse loops that conform to the
following 4 conditions:
1. Adjacent (no code between them)
2. Control flow equivalent (if one loop executes, the other loop executes)
3. Identical bounds (both loops iterate the same number of iterations)
4. No negative distance dependencies between the loop bodies.
The pass does not make any changes to the IR to create opportunities for fusion.
Instead, it checks if the necessary conditions are met and if so it fuses two
loops together.
The pass has not been added to the pass pipeline yet, and thus is not enabled by
default. It can be run stand alone using the -loop-fusion option.
Phabricator: https://reviews.llvm.org/D55851
llvm-svn: 358543
This is 1 of the problems discussed in the post-commit thread for:
rL355741 / http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190311/635516.html
and filed as:
https://bugs.llvm.org/show_bug.cgi?id=41101
Instcombine tries to canonicalize some of these cases (and there's room for improvement
there independently of this patch), but it can't always do that because of extra uses.
So we need to recognize these commuted operand patterns here in EarlyCSE. This is similar
to how we detect commuted compares and commuted min/max/abs.
Differential Revision: https://reviews.llvm.org/D60723
llvm-svn: 358523
If a umul.with.overflow or smul.with.overflow operation cannot
overflow, simplify it to a simple mul nuw / mul nsw. After the
refactoring in D60668 this is just a matter of removing an
explicit check against multiplications.
Differential Revision: https://reviews.llvm.org/D60791
llvm-svn: 358521
This is a refactoring patch which should have all the functionality of the current code. Its goal is twofold:
i. Cleanup and simplify the reordering code, and
ii. Generalize reordering so that it will work for an arbitrary number of operands, not just 2.
This is the second patch in a series of patches that will enable operand reordering across chains of operations. An example of this was presented in EuroLLVM'18 https://www.youtube.com/watch?v=gIEn34LvyNo .
Committed on behalf of @vporpo (Vasileios Porpodas)
Differential Revision: https://reviews.llvm.org/D59973
llvm-svn: 358519
If a constant shift amount is used, then only some of the LHS/RHS
operand bits are demanded and we may be able to simplify based on
that. InstCombineSimplifyDemanded already had the necessary support
for that, we just weren't calling it with fshl/fshr as root.
In particular, this allows us to relax some masked funnel shifts
into simple shifts, as shown in the tests.
Patch by Shawn Landden.
Differential Revision: https://reviews.llvm.org/D60660
llvm-svn: 358515
This adds a WithOverflowInst class with a few helper methods to get
the underlying binop, signedness and nowrap type and makes use of it
where sensible. There will be two more uses in D60650/D60656.
The refactorings are all NFC, though I left some TODOs where things
could be improved. In particular we have two places where add/sub are
handled but mul isn't.
Differential Revision: https://reviews.llvm.org/D60668
llvm-svn: 358512
The original commit caused false positives from AddressSanitizer's
use-after-scope checks, which have now been fixed in r358478.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 358483
If there are any intrinsics that cannot be traced back to an alloca, we
might have missed the start of a variable's scope, leading to false
error reports if the variable is poisoned at function entry. Instead, if
there are some intrinsics that can't be traced, fail safe and don't
poison the variables in that function.
Differential revision: https://reviews.llvm.org/D60686
llvm-svn: 358478
The CodeExtractor is not smart enough to compute which basic block is
the entry of a region. Instead it relies on the order of the list
of basic blocks that is handed to it and assumes that the entry
is the first block in the list.
Without the additional debug information, it is hard to understand
why a valid region does not get extracted, because we would miss
that the order of in the list just doesn't match what the CodeExtractor
wants.
NFC
llvm-svn: 358471
If LSR split critical edge during rewriting phi operands and
phi node has other pending fixup operands, we need to
update those pending fixups. Otherwise formulae will not be
implemented completely and some instructions will not be eliminated.
llvm.org/PR41445
Differential Revision: https://reviews.llvm.org/D60645
Patch by: Denis Bakhvalov <denis.bakhvalov@intel.com>
llvm-svn: 358457
This is a preparatory patch for D60093. This patch itself is NFC, but while preparing this I noticed and committed a small hoisting change in rL358419.
The basic structure of the new scheme is that we pass around the guard ("the using instruction"), and select an optimal insert point by examining operands at each construction point. This seems conceptually a bit cleaner to start with as it isolates the knowledge about insertion safety at the actual insertion point.
Note that the non-hoisting path is not actually used at the moment. That's not exercised until D60093 is rebased on this one.
Differential Revision: https://reviews.llvm.org/D60718
llvm-svn: 358434
Zexts can be treated like no-op casts when it comes to assessing whether their
removal affects debug info.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D60641
llvm-svn: 358431
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
If we have multiple range checks which can be predicated, hoist the and of the results outside the loop. This minorly cleans up the resulting IR, but the main motivation is as a building block for D60093.
llvm-svn: 358419
Summary:
Factor out findAllocaForValue() from ASan so that we can use it in
MSan to handle lifetime intrinsics.
Reviewers: eugenis, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60615
llvm-svn: 358380
* Rearrange continu/break
* BBNumbers.lookup(A) -> BBNumbers.find(A)->second
BBNumbers has been computed, thus we can assume the value exists in the predicate.
llvm-svn: 358351
As pointed out in D60518 folding mulo(%x, undef) to {undef, undef}
isn't correct. As a correct version of this already exists in
InstructionSimplify (bd8056ef32/lib/Analysis/InstructionSimplify.cpp (L4750-L4757)) this is just
dead code though. Drop it together with the mul(%x, 0) -> {0, false}
fold that is also already handled by InstSimplify.
Differential Revision: https://reviews.llvm.org/D60649
llvm-svn: 358339
Summary:
Create a method to forget everything in SCEV.
Add a cl::opt and PassManagerBuilder option to use this in LoopUnroll.
Motivation: Certain Halide applications spend a very long time compiling in forgetLoop, and prefer to forget everything and rebuild SCEV from scratch.
Sample difference in compile time reduction: 21.04 to 14.78 using current ToT release build.
Testcase showcasing this cannot be opensourced and is fairly large.
The option disabled by default, but it may be desirable to enable by
default. Evidence in favor (two difference runs on different days/ToT state):
File Before (s) After (s)
clang-9.bc 7267.91 6639.14
llvm-as.bc 194.12 194.12
llvm-dis.bc 62.50 62.50
opt.bc 1855.85 1857.53
File Before (s) After (s)
clang-9.bc 8588.70 7812.83
llvm-as.bc 196.20 194.78
llvm-dis.bc 61.55 61.97
opt.bc 1739.78 1886.26
Reviewers: sanjoy
Subscribers: mehdi_amini, jlebar, zzheng, javed.absar, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60144
llvm-svn: 358304
This fixes a miscompile which was introduced in r356510 (https://reviews.llvm.org/D57372).
The problem is that the original patch removed pointer operands where the load results we're demanded, but without considering the legality of the load itself. If the masked.gather had active, but undemanded, lanes, then we could end up creating a load which loaded from an undef address. The result could be a segfault, or, in theory, an arbitrary read from a random memory location into an used register.
llvm-svn: 358299
When CVP determines that a with.overflow intrinsic cannot overflow,
it currently inserts a simple add/sub. As we already determined that
there can be no overflow, we should add the appropriate NUW/NSW flag.
Differential Revision: https://reviews.llvm.org/D60585
llvm-svn: 358298
Bug: https://bugs.llvm.org/show_bug.cgi?id=41175
In the bug test case the DSE pass is shortening the range of memory that a
memset is working on. A getelementptr is generated so that the new
starting address can be passed to memset. This instruction was not given
a DebugLoc.
To fix the bug, copy the DebugLoc from the memset instruction.
Patch by Orlando Cazalet-Hyams!
Differential Revision: https://reviews.llvm.org/D60556
llvm-svn: 358270
We currently assume profile hash conflicts will be caught by an upfront
check and we assert for the cases that escape the check. The assumption
is not always true as there are chances of conflict. This patch prints
a warning and skips annotating the function for the escaped cases,.
Differential Revision: https://reviews.llvm.org/D60154
llvm-svn: 358225
Following D60483 and D60497, this adds support for AlwaysOverflows
handling for ssubo. This is the last case we can handle right now.
Differential Revision: https://reviews.llvm.org/D60518
llvm-svn: 358100
ssubo X, C is equivalent to saddo X, -C. Make the transformation in
InstCombine and allow the logic implemented for saddo to fold prior
usages of add nsw or sub nsw with constants.
Patch by Dan Robertson.
Differential Revision: https://reviews.llvm.org/D60061
llvm-svn: 358099
1. Use computed VF for stress testing.
2. If the computed VF does not produce vector code (VF smaller than 2), force VF to be 4.
3. Test vectorization of i64 data on AArch64 to make sure we generate VF != 4 (on X86 that was already tested on AVX).
Patch by Francesco Petrogalli <francesco.petrogalli@arm.com>
Differential Revision: https://reviews.llvm.org/D59952
llvm-svn: 358056
Philip Reames