This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
For people who use llvm-readelf as a replacement of GNU readelf, they would like to see -d -r ... listed in llvm-readelf -help. It also helps understanding the confusing -s (which is unfortunately different in semantics).
Reviewers: phosek, ruiu, echristo
Reviewed By: ruiu, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52129
llvm-svn: 342339
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Helpers are available to make this option file format independant. This
patch adds the feature for Wasm file format. It doesn't change the
behavior of the other file format handling.
Differential Revision: https://reviews.llvm.org/D49545
llvm-svn: 337896
When output style is GNU and amount of sections is >= SHN_LORESERVE,
llvm-readobj reports zero number of sections instead of actual value.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49544
llvm-svn: 337462
http://www.sco.com/developers/gabi/2003-12-17/ch4.eheader.html
says that e_shnum and/or e_shstrndx may have special values if
"the number of sections is greater than or equal to SHN_LORESERVE" or
"the section name string table section index is greater than or equal to SHN_LORESERVE (0xff00)"
Previously llvm-readobj was unable to dump such files, patch changes that.
I had to add a precompiled test case because it does not seem possible to
prepare a test using yaml2obj or llvm-mc (not clear how to make .shstrtab
to have index >= SHN_LORESERVE).
Differential revision: https://reviews.llvm.org/D49369
llvm-svn: 337360
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
We were printing every character, even those that weren't printable. It
doesn't really make sense for this option.
The string content was sticked to its address, added two spaces in
between.
Differential Revision: https://reviews.llvm.org/D48271
llvm-svn: 336058
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Author: rahulchaudhry
Differential Revision: https://reviews.llvm.org/D47919
llvm-svn: 335922
With '-elf-output-style=GNU -relocations', a header containing the number
of entries is printed before all the relocation entries in the section.
For Android packed format, we need to perform the unpacking first before
we can get the actual number of relocations in the section.
Patch by Rahul Chaudhry!
Differential Revision: https://reviews.llvm.org/D47800
llvm-svn: 334147
Resubmit of r333424. This version contains the fix for fails found by buildbots
on some targets.
This patch allows parsing GNU_PROPERTY_X86_FEATURE_1_AND
notes in .note.gnu.property sections. These notes
indicate that the object file is built to support Intel CET.
patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D47473
llvm-svn: 333908
Object FIle Representation
At codegen time this is emitted into the ELF file a pair of symbol indices and a weight. In assembly it looks like:
.cg_profile a, b, 32
.cg_profile freq, a, 11
.cg_profile freq, b, 20
When writing an ELF file these are put into a SHT_LLVM_CALL_GRAPH_PROFILE (0x6fff4c02) section as (uint32_t, uint32_t, uint64_t) tuples as (from symbol index, to symbol index, weight).
Differential Revision: https://reviews.llvm.org/D44965
llvm-svn: 333823
This patch allows parsing GNU_PROPERTY_X86_FEATURE_1_AND
notes in .note.gnu.property sections. These notes
indicate that the object file is built to support Intel CET.
patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D47473
llvm-svn: 333424
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
These appear in a .debug$P section, which is exactly the same in
format as a .debug$T section. So we shouldn't ignore these when
dumping types.
llvm-svn: 329326
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: JDevlieghere, zturner, echristo, dberris, friss
Reviewed By: echristo
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D45141
llvm-svn: 328943
Summary:
I recently added a new dynamic tag to our fork of LLVM and when adding it
to llvm-readobj I noticed that not all DT_ values were being handled there.
Using macros in a .def file that can be included by both ELFDumper.cpp and
the ELF.h header ensures that the two don't get out of sync when new values
are added.
Reviewers: grimar, pcc, davide, espindola
Reviewed By: grimar, espindola
Subscribers: srhines, llvm-commits
Differential Revision: https://reviews.llvm.org/D44558
llvm-svn: 328099
This diff extends the output of -elf-section-groups
(llvm style, gnu style is unchanged since it's meant to be
compatible with binutils readelf) with sh_link and sh_info.
This change will enable us to use llvm-readobj -elf-section-groups
for testing llvm-objcopy's support for .group sections.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D44280
llvm-svn: 327341
Clean up the parsing of notes in llvm-readobj, improve bounds checking, and
allow the parsing code to be reused.
Differential Revision: https://reviews.llvm.org/D43958
llvm-svn: 327320
Summary:
Original change was D43313 (r326932) and reverted by r326953 because it
broke an LLD test and a windows build. The LLD test was already fixed in
lld commit r326944 (thanks maskray). This is the original change with
the windows build fixed.
llvm-svn: 326970
This patch enhances DWARFDebugFrame with the capability of parsing and
printing DWARF expressions in CFI instructions. It also makes FDEs and
CIEs accessible to lib users, so they can process them in client tools
that rely on LLVM. To make it self-contained with a test case, it
teaches llvm-readobj to be able to dump EH frames and checks they are
correct in a unit test. The llvm-readobj code is Maksim Panchenko's work
(maksfb).
Reviewers: JDevlieghere, espindola
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D43313
llvm-svn: 326932
Neither the linker nor the runtime need this information
anymore. We were originally using this to model BSS size
but the plan is now to use the segment metadata to allow
for BSS segments.
Differential Revision: https://reviews.llvm.org/D41366
llvm-svn: 326267
This is combination of two patches by Nicholas Wilson:
1. https://reviews.llvm.org/D41954
2. https://reviews.llvm.org/D42495
Along with a few local modifications:
- One change I made was to add the UNDEFINED bit to the binary format
to avoid the extra byte used when writing data symbols. Although this
bit is redundant for other symbols types (i.e. undefined can be
implied if a function or global is a wasm import)
- I prefer to be explicit and consistent and not have derived flags.
- Some field renaming.
- Some reverting of unrelated minor changes.
- No test output differences.
Differential Revision: https://reviews.llvm.org/D43147
llvm-svn: 325860
Summary:
This protects calls to longjmp from transferring control to arbitrary
program points. Instead, longjmp calls are limited to the set of
registered setjmp return addresses.
This also implements /guard:nolongjmp to allow users to link in object
files that call setjmp that weren't compiled with /guard:cf. In this
case, the linker will approximate the set of address taken functions,
but it will leave longjmp unprotected.
I used the following program to test, compiling it with different -guard
flags:
$ cl -c t.c -guard:cf
$ lld-link t.obj -guard:cf
#include <setjmp.h>
#include <stdio.h>
jmp_buf buf;
void g() {
printf("before longjmp\n");
fflush(stdout);
longjmp(buf, 1);
}
void f() {
if (setjmp(buf)) {
printf("setjmp returned non-zero\n");
return;
}
g();
}
int main() {
f();
printf("hello world\n");
}
In particular, the program aborts when the code is compiled *without*
-guard:cf and linked with -guard:cf. That indicates that longjmps are
protected.
Reviewers: ruiu, inglorion, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43217
llvm-svn: 325047
Introduce an extension to support passing linker options to the linker.
These would be ignored by older linkers, but newer linkers which support
this feature would be able to process the linker.
Emit a special discarded section `.linker-option`. The content of this
section is a pair of strings (key, value). The key is a type identifier for
the parameter. This allows for an argument free parameter that will be
processed by the linker with the value being the parameter. As an example,
`lib` identifies a library to be linked against, traditionally the `-l`
argument for Unix-based linkers with the parameter being the library name.
Thanks to James Henderson, Cary Coutant, Rafael Espinolda, Sean Silva
for the valuable discussion on the design of this feature.
llvm-svn: 323783
Get rid of DEBUG_FUNCTION_NAME symbols. When we actually debug
data, maybe we'll want somewhere to put it... but having a symbol
that just stores the name of another symbol seems odd.
It means you have multiple Symbols with the same name, one
containing the actual function and another containing the name!
Store the names in a vector on the WasmObjectFile when reading
them in. Also stash them on the WasmFunctions themselves.
The names are //not// "symbol names" or aliases or anything,
they're just the name that a debugger should show against the
function body itself. NB. The WasmObjectFile stores them so that
they can be exported in the YAML losslessly, and hence the tests
can be precise.
Enforce that the CODE section has been read in before reading
the "names" section. Requires minor adjustment to some tests.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42075
llvm-svn: 322741
There were a few places where outs() was being used
directly rather than the ScopedPrinter object.
Differential Revision: https://reviews.llvm.org/D41370
llvm-svn: 322141
This change adds `printMipsGOT` and `printMipsPLT` methods to the
`DumpStyle` class and overrides them in the `GNUStyle` and `LLVMStyle`
descendants. To pass information about GOT/PLT layout into these
methods, the `MipsGOTParser` class has been extended to hold all
necessary data.
llvm-svn: 321253
If a linked binary file contains a dynamic section, the GOT layout
defined by the dynamic section entries. In a statically linked file
the GOT is just a series of entries. This change teaches `llvm-readobj`
to print the GOT in that case. That provides a feature parity with GNU
`readelf`.
llvm-svn: 319616
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
Summary:
This change introduces a `DynamicSymbols` field to the ELF specific YAML
supported by `yaml2obj` and `obj2yaml`. This grouping of symbols provides a way
to represent ELF dynamic symbols. The `DynamicSymbols` structure is identical to
the existing `Symbols`.
Reviewers: compnerd, jakehehrlich, silvas
Reviewed By: silvas
Subscribers: silvas, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D39582
llvm-svn: 318433
The LLVM tools can be used as a replacement for binutils, in which case
it's convenient to create symlinks with the binutils names. Add support
for these symlinks in the build system. As with any other llvm tool
symlinks, the user can limit the installed symlinks by only adding the
desired ones to `LLVM_TOOLCHAIN_TOOLS`.
Differential Revision: https://reviews.llvm.org/D39530
llvm-svn: 317272
The Android relocation packing format is a more compact
format for dynamic relocations in executables and DSOs
that is based on delta encoding and SLEBs. An overview
of the format can be found in the Android source code:
https://android.googlesource.com/platform/bionic/+/refs/heads/master/tools/relocation_packer/src/delta_encoder.h
This patch implements relocation packing using that format.
This implementation uses a more intelligent algorithm for compressing
relative relocations than Android's own relocation packer. As a
result it can generally create smaller relocation sections than
that packer. If I link Chromium for Android targeting ARM32 I get a
.rel.dyn of size 174693 bytes, as compared to 371832 bytes with gold
and the Android packer.
Differential Revision: https://reviews.llvm.org/D39152
llvm-svn: 316775
This is in preparation for testing lld's upcoming relocation packing
feature (D39152). I have verified that this implementation correctly
unpacks the relocations from a Chromium DSO built with gold and the
Android relocation packer for ARM32 and ARM64.
Differential Revision: https://reviews.llvm.org/D39272
llvm-svn: 316543
The previous version of dumper implemented UTF-16 byte swap incorrectly
on big-endian machines. This now gets fixed.
Thanks to Bill Seurer for testing the patch locally.
Differential Review: https://reviews.llvm.org/D38150
llvm-svn: 313912
Add adds support for naming data segments. This is useful
useful linkers so that they can merge similar sections.
Differential Revision: https://reviews.llvm.org/D37886
llvm-svn: 313795
This enables readobj to output Windows resource files (.res). This way,
we'll be able to test .res outputs without comparing them byte-by-byte
with "magic binary files" generated by MS toolchain.
Differential Revision: https://reviews.llvm.org/D38058
llvm-svn: 313790
Add adds support for naming data segments. This is useful
useful linkers so that they can merge similar sections.
Differential Revision: https://reviews.llvm.org/D37886
llvm-svn: 313692
readelf tool reports an error when output contains the same section
in multiple COMDAT groups. That can be useful.
Path teaches llvm-readobj to do the same.
Differential revision: https://reviews.llvm.org/D37567
llvm-svn: 313459
With fix in formatting for GNU style output.
Original commit message:
This refactors GNUStyle<ELFT>::printGroupSections and
LLVMStyle<ELFT>::printGroupSections to split out all
duplicated code.
After the change these methods just prints the data provided
by introduced getGroups in a corresponding LLVM/GNU format.
Differential revision: https://reviews.llvm.org/D37621
llvm-svn: 313236
This refactors GNUStyle<ELFT>::printGroupSections and
LLVMStyle<ELFT>::printGroupSections to split out all
duplicated code.
After the change these methods just prints the data provided
by introduced getGroups in a corresponding LLVM/GNU format.
Differential revision: https://reviews.llvm.org/D37621
llvm-svn: 313234
Install an llvm-readelf symlink to llvm-readobj.
When invoked as *readelf*, default to -elf-output-style=GNU.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33869
llvm-svn: 308408
Accept and ignore --wide/-W. In GNU readelf this switch is
necessary to get the output format that's consistent between
32-bit and 64-bit targets. llvm-readobj always produces that
output format.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33873
llvm-svn: 308396
In GNU readelf, the short option for --sections is upper-case -S.
Note that GNU uses lower-case -s to mean --symbols, while LLVM
uses -s to mean --sections and -t to mean --symbols (-t has yet a
different meaning in GNU). So command-line uses with -S can now
be compatible, but uses with -s or -t are still incompatible.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33872
llvm-svn: 308392
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
Nothing special here, output format is similar to the format
used by binutils readelf and ELF Tool Chain readelf.
Differential revision: https://reviews.llvm.org/D35351
llvm-svn: 308033
We would return an error in getVaPtr if the RVA table being dumped was
the last data in the .rdata section. Avoid the issue by subtracting one
from the offset and adding it back to get an open interval again.
llvm-svn: 306171
This includes the safe SEH tables and the control flow guard function
table. LLD will emit the guard table soon, and I need a tool that dumps
them for testing.
llvm-svn: 305979
Merge the functionality into the random access type collection.
This class was only being used in 2 places, so getting rid of it
simplifies the code.
llvm-svn: 305653
Summary: Added test cases for multiple machine types, file merging, multiple languages, and more resource types. Also fixed new bugs these tests exposed.
Subscribers: javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34047
llvm-svn: 305258
I accidentally combined this patch with one for adding more tests, they
should be separated.
This reverts commit 3da218a523be78df32e637d3446ecf97c9ea0465.
llvm-svn: 305257
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
This adds implementations for Symbols and FrameData, and renames
the existing codeview::StringTable class to conform to the
DebugSectionStringTable convention.
llvm-svn: 304222
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
The previous code was discarding the error message from
createBinary() by calling errorToErrorCode().
This meant that such error were always reported unhelpfully
as "Invalid data was encountered while parsing the file".
Other tools such as llvm-objdump already produce a more
the error message in this case.
Differential Revision: https://reviews.llvm.org/D32985
llvm-svn: 302664
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
Most of the time we know exactly how many type records we
have in a list, and we want to use the visitor to deserialize
them into actual records in a database. Previously we were
just using push_back() every time without reserving the space
up front in the vector. This is obviously terrible from a
performance standpoint, and it's not uncommon to have PDB
files with half a million type records, where the performance
degredation was quite noticeable.
llvm-svn: 302302
Luke Cheeseman