This adds 4 new reloc types.
A lot of code that previously assumed any memory or offset values could be contained in a uint32_t (and often truncated results from functions returning 64-bit values) have been upgraded to uint64_t. This is not comprehensive: it is only the values that come in contact with the new relocation values and their dependents.
A new tablegen mapping was added to automatically upgrade loads/stores in the assembler, which otherwise has no way to select for these instructions (since they are indentical other than for the offset immediate). It follows a similar technique to https://reviews.llvm.org/D53307
Differential Revision: https://reviews.llvm.org/D81704
Summary:
Swift ABI is based on basic C ABI described here https://github.com/WebAssembly/tool-conventions/blob/master/BasicCABI.md
Swift Calling Convention on WebAssembly is a little deffer from swiftcc
on another architectures.
On non WebAssembly arch, swiftcc accepts extra parameters that are
attributed with swifterror or swiftself by caller. Even if callee
doesn't have these parameters, the invocation succeed ignoring extra
parameters.
But WebAssembly strictly checks that callee and caller signatures are
same. https://github.com/WebAssembly/design/blob/master/Semantics.md#calls
So at WebAssembly level, all swiftcc functions end up extra arguments
and all function definitions and invocations explicitly have additional
parameters to fill swifterror and swiftself.
This patch support signature difference for swiftself and swifterror cc
is swiftcc.
e.g.
```
declare swiftcc void @foo(i32, i32)
@data = global i8* bitcast (void (i32, i32)* @foo to i8*)
define swiftcc void @bar() {
%1 = load i8*, i8** @data
%2 = bitcast i8* %1 to void (i32, i32, i32)*
call swiftcc void %2(i32 1, i32 2, i32 swiftself 3)
ret void
}
```
For swiftcc, emit additional swiftself and swifterror parameters
if there aren't while lowering. These additional parameters are added
for both callee and caller.
They are necessary to match callee and caller signature for direct and
indirect function call.
Differential Revision: https://reviews.llvm.org/D76049
Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types, and removes the
CallIndirectFixup pass, since all indirect call arguments are now
fixed up directly in the post-insertion hook.
In order to keep supporting pretty-printed defs and uses in test
expectations, MCInstLower now inserts an immediate containing the
number of defs for each call and call_indirect. The InstPrinter is
updated to query this immediate if it is present and determine which
MCOperands are defs and uses accordingly.
Depends on D72902.
Reviewers: aheejin
Subscribers: dschuff, mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74192
Summary:
Unlike normal calls, call_indirects have immediate arguments that
caused a MachineVerifier failure without a small tweak to loosen the
verifier's requirements for variadicOpsAreDefs instructions.
One nice thing about the new call_indirects is that they do not need
to participate in the PCALL_INDIRECT mechanism because their post-isel
hook handles moving the function pointer argument and adding the flags
and typeindex arguments itself.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74191
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68889
llvm-svn: 374933
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
return_call and return_call_indirect are only valid if the return
types of the callee and caller match. We were previously not enforcing
that, which was producing invalid modules.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65246
llvm-svn: 367339
Summary:
Add immutable WASM global `__tls_align` which stores the alignment
requirements of the TLS segment.
Add `__builtin_wasm_tls_align()` intrinsic to get this alignment in Clang.
The expected usage has now changed to:
__wasm_init_tls(memalign(__builtin_wasm_tls_align(),
__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, sbc100, sunfish, alexcrichton
Reviewed By: tlively
Subscribers: dschuff, jgravelle-google, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65028
llvm-svn: 366624
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
Summary:
Most of these functions can work for MachineInstr and MCInst
equally now.
Reviewers: dschuff
Subscribers: MatzeB, sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64643
llvm-svn: 365965
This change is in preparation for the addition of new target
operand flags for new relocation types. Have a symbol type as part
of the flag set makes it harder to use and AFAICT these are serving
no purpose.
Differential Revision: https://reviews.llvm.org/D60014
llvm-svn: 357548
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
We record the type of the symbol (event/function/data/global) in the
MCWasmSymbol and so it should always be clear how to handle a relocation
based on the symbol itself.
The exception is a function which still needs the special @TYPEINDEX
then the relocation contains the signature rather than the address
of the functions.
Differential Revision: https://reviews.llvm.org/D58472
llvm-svn: 354697
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This adds support for the 'event section' specified in the exception
handling proposal. (This was named 'exception section' first, but later
renamed to 'event section' to take possibilities of other kinds of
events into consideration. But currently we only store exception info in
this section.)
The event section is added between the global section and the export
section. This is for ease of validation per request of the V8 team.
This patch:
- Creates the event symbol type, which is a weak symbol
- Makes 'throw' instruction take the event symbol '__cpp_exception'
- Adds relocation support for events
- Adds WasmObjectWriter / WasmObjectFile (Reader) support
- Adds obj2yaml / yaml2obj support
- Adds '.eventtype' printing support
Reviewers: dschuff, sbc100, aardappel
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54096
llvm-svn: 346825
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 345345
Summary:
Replace its functionality with a TableGen InstrInfo relational
instruction mapping. Although arguably more complex than the TableGen
backend, the relational mapping is a smaller maintenance burden than a
TableGen backend.
Reviewers: aardappel, aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53307
llvm-svn: 344962
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 344575
MCContext does not destroy MCSymbols on shutdown. So, rather than putting
SmallVectors (which may heap-allocate) inside MCSymbolWasm, use unowned pointer
to a WasmSignature instead. The signatures are now owned by the AsmPrinter.
Also uses WasmSignature instead of param and result vectors in TargetStreamer,
and leaves some TODOs for further simplification.
Differential Revision: https://reviews.llvm.org/D52580
llvm-svn: 343733
Summary: Adds the necessary support to lib/ObjectYAML and fixes SIMD
calls to allow the tests to work. Also removes some dead code that
would otherwise have to have been updated.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52105
llvm-svn: 342689
Summary:
Add comments to help readers avoid having to read tablegen backends to
understand the code. Also remove unecessary breaks from the output.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51371
llvm-svn: 340864
Summary:
The new stackification backend generates the giant switch statement
used to translate instructions to their stackified forms. I did this
because it was more interesting than adding all the different vector
versions of the various SIMD instructions to the switch statment
manually.
Reviewers: aardappel, aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D51318
llvm-svn: 340781
Summary:
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51241
llvm-svn: 340750
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
The original BinaryEncoding.md document used to specify that
these values were `varint7`, but the official spec lists them
explicitly as single byte values and not LEB.
A similar change for wabt is in flight:
https://github.com/WebAssembly/wabt/pull/782
Differential Revision: https://reviews.llvm.org/D43921
llvm-svn: 326454
This is combination of two patches by Nicholas Wilson:
1. https://reviews.llvm.org/D41954
2. https://reviews.llvm.org/D42495
Along with a few local modifications:
- One change I made was to add the UNDEFINED bit to the binary format
to avoid the extra byte used when writing data symbols. Although this
bit is redundant for other symbols types (i.e. undefined can be
implied if a function or global is a wasm import)
- I prefer to be explicit and consistent and not have derived flags.
- Some field renaming.
- Some reverting of unrelated minor changes.
- No test output differences.
Differential Revision: https://reviews.llvm.org/D43147
llvm-svn: 325860
Previously we were using the encoded LEB hex values
for the value types. This change uses the decoded
negative value and the LEB encoder to write them out.
Differential Revision: https://reviews.llvm.org/D30847
Patch by Sam Clegg
llvm-svn: 297777
With the "wasm32-unknown-unknown-wasm" triple, this allows writing out
simple wasm object files, and is another step in a larger series toward
migrating from ELF to general wasm object support. Note that this code
and the binary format itself is still experimental.
llvm-svn: 296190
This patch changes the way labels are referenced. Instead of referencing the
basic-block label name (eg. .LBB0_0), instructions now just have an immediate
which indicates the depth in the control-flow stack to find a label to jump to.
This makes them much closer to what we expect to have in the binary encoding,
and avoids the problem of basic-block label names not being explicit in the
binary encoding.
Also, it terminates blocks and loops with end_block and end_loop instructions,
rather than basic-block label names, for similar reasons.
This will also fix problems where two constructs appear to have the same label,
because we no longer explicitly use labels, so consumers that need labels will
presumably create their own labels, and presumably they won't reuse labels
when they do.
This patch does make the code a little more awkward to read; as a partial
mitigation, this patch also introduces comments showing where the labels are,
and comments on each branch showing where it's branching to.
llvm-svn: 257505
Currently WebAssembly has two kinds of relocations; data addresses and
function addresses. This adds ELF relocations for them, as well as an
MC symbol kind to indicate which type of relocation is needed.
llvm-svn: 257416
Wouter van Oortmerssen