LLVM IR function names which disable mangling start with '\01'
(https://www.llvm.org/docs/LangRef.html#identifiers).
When an identifier like "\01@abc@" gets dumped to MIR, it is quoted, but
only with single quotes.
http://www.yaml.org/spec/1.2/spec.html#id2770814:
"The allowed character range explicitly excludes the C0 control block
allowed), the surrogate block #xD800-#xDFFF, #xFFFE, and #xFFFF."
http://www.yaml.org/spec/1.2/spec.html#id2776092:
"All non-printable characters must be escaped.
[...]
Note that escape sequences are only interpreted in double-quoted scalars."
This patch adds support for printing escaped non-printable characters
between double quotes if needed.
Should also fix PR31743.
Differential Revision: https://reviews.llvm.org/D41290
llvm-svn: 320996
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
This version has the correct commit message.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41183
llvm-svn: 320991
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
Enhance LVI to analyze the ‘ashr’ binary operation. This leverages the infrastructure in ConstantRange for the ashr operation.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D40886
llvm-svn: 320983
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
Reviewers: atanasyan
https://reviews.llvm.org/D41183
llvm-svn: 320974
For Cylone, the instruction "movi.2d vD, #0" is executed incorrectly in some rare
circumstances. Work around the issue conservatively by avoiding the instruction entirely.
This patch changes CodeGen so that problematic instructions are never
generated, and the AsmParser so that an equivalent instruction is used (with a
warning).
llvm-svn: 320965
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D41177
llvm-svn: 320962
Based on the names of the check lines, features seems more appropriate that cpu.
Spotted while prototyping my patch to make 512-bit vectors illegal on SKX sometimes.
llvm-svn: 320959
This patch introduce a switch to control splitting of non-whole-alloca slices with default off.
The switch will be default on again after fixing an issue reported in PR35657.
llvm-svn: 320958
When we put the value in select placeholder we must pass
the value through simplification tracker due to the value might
be already simplified and erased.
This is a fix for PR35658.
Reviewers: john.brawn, uabelho
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41251
llvm-svn: 320956
This is a follow up to the fmaddsub support added in r320950. Hopefully in the future we can fix lowering to handle this fmsubadd too.
llvm-svn: 320951
Summary:
We had no tests for this and we couldn't do the optimization because of a bad use count check. We need to know how many non-undef pieces of the build vector were filled in and ensure our use count is equal to that. But on the shuffle combine version we need the use count to be 2.
The missing coverage was noticed during the review of D40335.
Reviewers: RKSimon, zvi, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41133
llvm-svn: 320950
Summary:
For byval arguments, the number of dereferenceable bytes is equal to
the size of the pointee, not the pointer.
Reviewers: hfinkel, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41305
llvm-svn: 320939
Assuming we can safely adjust the broadcast index for the new type to keep it suitably aligned, then peek through BITCASTs when looking for the broadcast source.
Fixes PR32007
llvm-svn: 320933
If the loop operand type is int8 then there will be no residual loop for the
unknown size expansion. Dont create the residual-size and bytes-copied values
when they are not needed.
llvm-svn: 320929
Previously we promoted to v8i64, but we don't need to go all the way to 512-bits. If we have VLX we can use the 256-bit instruction. And even if we don't have VLX we can widen v8i32 to v16i32 and drop the upper half.
llvm-svn: 320926
We want to do this for 2 reasons:
1. Value tracking does not recognize the ashr variant, so it would fail to match for cases like D39766.
2. DAGCombiner does better at producing optimal codegen when we have the cmp+sel pattern.
More detail about what happens in the backend:
1. DAGCombiner has a generic transform for all targets to convert the scalar cmp+sel variant of abs
into the shift variant. That is the opposite of this IR canonicalization.
2. DAGCombiner has a generic transform for all targets to convert the vector cmp+sel variant of abs
into either an ABS node or the shift variant. That is again the opposite of this IR canonicalization.
3. DAGCombiner has a generic transform for all targets to convert the exact shift variants produced by #1 or #2
into an ISD::ABS node. Note: It would be an efficiency improvement if we had #1 go directly to an ABS node
when that's legal/custom.
4. The pattern matching above is incomplete, so it is possible to escape the intended/optimal codegen in a
variety of ways.
a. For #2, the vector path is missing the case for setlt with a '1' constant.
b. For #3, we are missing a match for commuted versions of the shift variants.
5. Therefore, this IR canonicalization can only help get us to the optimal codegen. The version of cmp+sel
produced by this patch will be recognized in the DAG and converted to an ABS node when possible or the
shift sequence when not.
6. In the following examples with this patch applied, we may get conditional moves rather than the shift
produced by the generic DAGCombiner transforms. The conditional move is created using a target-specific
decision for any given target. Whether it is optimal or not for a particular subtarget may be up for debate.
define i32 @abs_shifty(i32 %x) {
%signbit = ashr i32 %x, 31
%add = add i32 %signbit, %x
%abs = xor i32 %signbit, %add
ret i32 %abs
}
define i32 @abs_cmpsubsel(i32 %x) {
%cmp = icmp slt i32 %x, zeroinitializer
%sub = sub i32 zeroinitializer, %x
%abs = select i1 %cmp, i32 %sub, i32 %x
ret i32 %abs
}
define <4 x i32> @abs_shifty_vec(<4 x i32> %x) {
%signbit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
%add = add <4 x i32> %signbit, %x
%abs = xor <4 x i32> %signbit, %add
ret <4 x i32> %abs
}
define <4 x i32> @abs_cmpsubsel_vec(<4 x i32> %x) {
%cmp = icmp slt <4 x i32> %x, zeroinitializer
%sub = sub <4 x i32> zeroinitializer, %x
%abs = select <4 x i1> %cmp, <4 x i32> %sub, <4 x i32> %x
ret <4 x i32> %abs
}
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=x86_64 -mattr=avx
> abs_shifty:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_cmpsubsel:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_shifty_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> abs_cmpsubsel_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=aarch64
> abs_shifty:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_cmpsubsel:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_shifty_vec:
> abs v0.4s, v0.4s
> ret
>
> abs_cmpsubsel_vec:
> abs v0.4s, v0.4s
> ret
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=powerpc64le
> abs_shifty:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_cmpsubsel:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_shifty_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
> abs_cmpsubsel_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
Differential Revision: https://reviews.llvm.org/D40984
llvm-svn: 320921
Changes to the original scalar loop during LV code gen cause the return value
of Legal->isConsecutivePtr() to be inconsistent with the return value during
legal/cost phases (further analysis and information of the bug is in D39346).
This patch is an alternative fix to PR34965 following the CM_Widen approach
proposed by Ayal and Gil in D39346. It extends InstWidening enum with
CM_Widen_Reverse to properly record the widening decision for consecutive
reverse memory accesses and, consequently, get rid of the
Legal->isConsetuviePtr() call in LV code gen. I think this is a simpler/cleaner
solution to PR34965 than the one in D39346.
Fixes PR34965.
Patch by Diego Caballero, thanks!
Differential Revision: https://reviews.llvm.org/D40742
llvm-svn: 320913
r307148 added an assembly mnemonic spelling correction support and enabled it
on ARM. This enables that support on PowerPC as well.
Patch by Dmitry Venikov, thanks!
Differential Revision: https://reviews.llvm.org/D40552
llvm-svn: 320911
Summary:
1. Use stream 0 only for combined module. Previously if combined module was not
processes ThinLTO used the stream for own output. However small changes in input,
could trigger combined module and shuffle outputs making life of llvm::LTO harder.
2. Always process combined module and write output to stream 0. Processing empty
combined module is cheap and allows llvm::LTO users to avoid implementing processing
which is already done in llvm::LTO.
Subscribers: mehdi_amini, inglorion, eraman, hiraditya
Differential Revision: https://reviews.llvm.org/D41267
llvm-svn: 320905
r320895 modified a test so that it needs -enable-import-metadata which
is false by default for NDEBUG, found another place that needs this
added.
llvm-svn: 320903
When unsafe algerbra is allowed calls to cabs(r) can be replaced by:
sqrt(creal(r)*creal(r) + cimag(r)*cimag(r))
Patch by Paul Walker, thanks!
Differential Revision: https://reviews.llvm.org/D40069
llvm-svn: 320901
Summary:
This implements a missing feature to allow importing of aliases, which
was previously disabled because alias cannot be available_externally.
We instead import an alias as a copy of its aliasee.
Some additional work was required in the IndexBitcodeWriter for the
distributed build case, to ensure that the aliasee has a value id
in the distributed index file (i.e. even when it is not being
imported directly).
This is a performance win in codes that have many aliases, e.g. C++
applications that have many constructor and destructor aliases.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D40747
llvm-svn: 320895
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
This recommits r320823 reverted due to the test failure in sink-foldable.ll and
an unused variable. Added "REQUIRES: aarch64-registered-target" in the test
and removed unused variable.
Original commit message:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320858
Summary:
Currently we don't handle v32i1/v64i1 insert_vector_elt correctly as we fail to look at the number of elements closely and assume it can only be v16i1 or v8i1.
We also can't type legalize v64i1 insert_vector_elt correctly on KNL due to the type not being byte addressable as required by the legalizing through memory accesses path requires.
For the first issue, the patch now tries to pick a 512-bit register with the correct number of elements and promotes to that.
For the second issue, we now extend the vector to a byte addressable type, do the stores to memory, load the two halves, and then truncate the halves back to the original type. Technically since we changed the type, we may not need two loads, but actually checking that is more work and for the v64i1 case we do need them.
Reviewers: RKSimon, delena, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40942
llvm-svn: 320849
The original memcpy expansion inserted the loop basic block inbetween
the 2 new basic blocks created by splitting the original block the memcpy
call was in. This commit makes the new memcpy expansion do the same to keep the
layout of the IR matching between the old and new implementations.
Differential Review: https://reviews.llvm.org/D41197
llvm-svn: 320848
This recommit r320823 after fixing a test failure.
Original commit message:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320833
Summary:
llvm-objdump's Mach-O parser was updated in r306037 to display external
relocations for MH_KEXT_BUNDLE file types. This change extends the Macho-O
parser to display local relocations for MH_PRELOAD files. When used with
the -macho option relocations will be displayed in a historical format.
All tests are passing for llvm, clang, and lld. llvm-objdump builds without
compiler warnings.
rdar://35778019
Reviewers: enderby
Reviewed By: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41199
llvm-svn: 320832
There was a top level "let Predicates =" in the .td file that was overriding the Requires on each instruction.
I've added an assert to the code emitter to catch more cases like this. I'm sure this isn't the only place where the right predicates aren't being applied. This assert already found that we don't block btq/btsq/btrq in 32-bit mode.
llvm-svn: 320830
Work towards the unification of MIR and debug output by printing
`%stack.0` instead of `<fi#0>`, and `%fixed-stack.0` instead of
`<fi#-4>` (supposing there are 4 fixed stack objects).
Only debug syntax is affected.
Differential Revision: https://reviews.llvm.org/D41027
llvm-svn: 320827
Summary:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320823
The following CFI directives are suported by MC but not by MIR:
* .cfi_rel_offset
* .cfi_adjust_cfa_offset
* .cfi_escape
* .cfi_remember_state
* .cfi_restore_state
* .cfi_undefined
* .cfi_register
* .cfi_window_save
Add support for printing, parsing and update tests.
Differential Revision: https://reviews.llvm.org/D41230
llvm-svn: 320819
SROA analysis of InlineCost can figure out that some stores can be removed
after inlining and then the repeated loads clobbered by these stores are also
free. This patch finds these clobbered loads and adjust the inline cost
accordingly.
Differential Revision: https://reviews.llvm.org/D33946
llvm-svn: 320814
c.slli/c.srli/c.srai allow a 5-bit shift in RV32C and a 6-bit shift in RV64C.
This patch adds uimmlog2xlennonzero to reflect this constraint as well as
tests.
Differential Revision: https://reviews.llvm.org/D41216
Patch by Shiva Chen.
llvm-svn: 320799
This patch switches the default for -riscv-no-aliases to false
and updates all affected MC and CodeGen tests. As recommended in
D41071, MC tests use the canonical instructions and the CodeGen
tests use the aliases.
Additionally, for the f and d instructions with rounding mode,
the tests for the aliased versions are moved and tightened such
that they can actually detect if alias emission is enabled.
(see D40902 for context)
Differential Revision: https://reviews.llvm.org/D41225
Patch by Mario Werner.
llvm-svn: 320797
Summary:
The port is nearly straightforward.
The only complication is related to the analyses handling,
since one of the analyses used in this module pass is domtree,
which is a function analysis. That requires asking for the results
of each function and disallows a single interface for run-on-module
pass action.
Decided to copy-paste the main body of this pass.
Most of its code is requesting analyses anyway, so not that much
of a copy-paste.
The rest of the code movement is to transform all the implementation
helper functions like stripNonValidData into non-member statics.
Extended all the related LLVM tests with new-pass-manager use.
No failures.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: skatkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D41162
llvm-svn: 320796
This patch adds the necessary infrastructure to convert instructions that
take two register operands to those that take a register and immediate if
the necessary operand is produced by a load-immediate. Furthermore, it uses
this infrastructure to perform such conversions twice - first at MachineSSA
and then pre-emit.
There are a number of reasons we may end up with opportunities for this
transformation, including but not limited to:
- X-Form instructions chosen since the exact offset isn't available at ISEL time
- Atomic instructions with constant operands (we will add patterns for this
in the future)
- Tail duplication may duplicate code where one block contains this redundancy
- When emitting compare-free code in PPCDAGToDAGISel, we don't handle constant
comparands specially
Furthermore, this patch moves the initialization of PPCMIPeepholePass so that
it can be used for MIR tests.
llvm-svn: 320791
A couple places didn't use the same SDValue variables to connect everything all the way through.
I don't have a test case for a bug in insert into the lower bits of a non-zero, non-undef vector. Not sure the best way to create that. We don't create the case when lowering concat_vectors which is the main way to get insert_subvectors.
llvm-svn: 320790
We cannot move the insertion point to header if SCEV contains div/rem
operations due to they may go over check for zero denominator.
Reviewers: sanjoy, mkazantsev, sebpop
Reviewed By: sebpop
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41229
llvm-svn: 320789
The compare elimination peephole introduced in https://reviews.llvm.org/rL312514
causes a miscompile in AMDGPUInstrInfo.cpp which in turn causes some AMDGPU
test case failures in stage2 bootstrap testing. This miscompile didn't cause any
test case failures until https://reviews.llvm.org/rL320614, so it appeared as if
that patch caused these failures.
Disabling this transformation for now to bring the build bots back to green and
the author of the patch will investigate the miscompile.
llvm-svn: 320786
Add support for properly handling PIC code with no-PLT. This equates to
`-fpic -fno-plt -O0` with the clang frontend. External functions are
marked with nonlazybind, which must then be indirected through the GOT.
This allows code to be built without optimizations in PIC mode without
going through the PLT. Addresses PR35653!
llvm-svn: 320776
Summary:
- lowers @llvm.global_dtors by adding @llvm.global_ctors
functions which register the destructors with `__cxa_atexit`.
- impements @llvm.global_ctors with wasm start functions and linker metadata
See [here](https://github.com/WebAssembly/tool-conventions/issues/25) for more background.
Subscribers: jfb, dschuff, mgorny, jgravelle-google, aheejin, sunfish
Differential Revision: https://reviews.llvm.org/D41211
llvm-svn: 320774
While investigating LLVM PR22316 (http://llvm.org/bugs/show_bug.cgi?id=22316)
I started wondering if it were not always preferable to emit the
initial DBG_VALUEs for stack arguments as FI locations instead of
describing the first register they get copied into. The advantage of
doing this is that the arguments will be available as soon as the
stack is setup. As illustrated by the testcase in the PR, the first
copy of the FI into a register may be sunk by MachineSink.cpp into a
later basic block. By describing the argument on the stack, we nicely
circumvent this problem.
<rdar://problem/19583723>
Differential Revision: https://reviews.llvm.org/D41135
llvm-svn: 320758
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
In SLPVectorizer, the vector build instructions (insertvalue for aggregate type) is passed to BoUpSLP.buildTree, it is treated as UserIgnoreList, so later in cost estimation, the cost of these instructions are not counted.
For aggregate value, later usage are more likely to be done in scalar registers, either used as individual scalars or used as a whole for function call or return value. Ignore scalar extraction instructions may cause too aggressive vectorization for aggregate values, and slow down performance. So for vectorization of aggregate value, the scalar extraction instructions are required in cost estimation.
Differential Revision: https://reviews.llvm.org/D41139
llvm-svn: 320736
This is a Swift feature. The output stream for the index page and the source
HTML page is utf-8 now.
The next patch will add the HTML magic to properly render these characters in
the browser.
llvm-svn: 320725
This doesn't match the semantics of the extract_vector_elt operation. Nothing downstream knows the bits were zeroed so they still get masked or sign extended after the extrat anyway.
llvm-svn: 320723
NFC.
Adding MC regressions tests to cover the AVX and AVX2 ISA sets.
This patch is part of a larger task to cover MC encoding of all X86 ISA Sets.
See revision: https://reviews.llvm.org/D39952
Reviewers: zvi, RKSimon, aymanmus, m_zuckerman
Differential Revison: https://reviews.llvm.org/D40287
Change-Id: I304687a2b7abb473f79de99c31fc55c97b2662da
llvm-svn: 320716
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more
specific than the previous diagnostic. However, when having validated
operands and 'moved on' to a next operand (for some instruction/alias for
which all previous operands are valid), if the diagnostic is InvalidOperand,
than that should be set as the diagnostic, not the more specific message
about a previous operand for some other instruction/alias candidate.
(Re-committed with an extra whitespace in SVEInstrFormats.td to trigger rebuild
of AArch64GenAsmMatcher.inc, since the llvm-clang-x86_64-expensive-checks-win
builder does not seem to rebuild AArch64GenAsmMatcher.inc with the
newly built TableGen due to a missing dependency somewhere (see:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119555.html))
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 320711
MIPSR6 introduced several new jump instructions and deprecated
the use of the 'j' instruction. For microMIPS32R6, 'j' was removed
entirely and it only has non delay slot jumps.
This patch adds support for MIPSR6 by using some R6 instructions--
'bc' instead of 'j', 'jic $reg, 0' instead of 'jalr $zero, $reg'--
and modifies the sequences not to use delay slots for R6.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: dschuff, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D40786
llvm-svn: 320703
Summary:
The function is meant to recurse until it comes upon the
phi it's looking for. However, with the current condition,
it will recurse until it finds anything _but_ the phi.
The function will even fail for simple cases like:
%i = phi i32 [ %inc, %loop ], ...
...
%inc = add i32 %i, 1
because the base condition will not happen when the phi
is recursed to, and the recursion will end with a 'false'
result since the previous instruction is a phi.
Reviewers: sanjoy, atrick
Reviewed By: sanjoy
Subscribers: Ka-Ka, bjope, llvm-commits
Committing on behalf of: Bevin Hansson (bevinh)
Differential Revision: https://reviews.llvm.org/D40946
llvm-svn: 320700
This patch fix this FIXME in visitPHI()
FIXME: We should potentially be tracking values through phi nodes,
especially when they collapse to a single value due to deleted CFG edges
during inlining.
Differential Revision: https://reviews.llvm.org/D38594
llvm-svn: 320699
store operation on a truncated memory (load) of vXi1 is poorly supported by LLVM and most of the time end with an assertion.
This patch fixes this issue.
Differential Revision: https://reviews.llvm.org/D39547
Change-Id: Ida5523dd09c1ad384acc0a27e9e59273d28cbdc9
llvm-svn: 320691
Summary:
Passing AliasAnalysis results instead of nullptr appears to work just fine.
A couple new-pass-manager tests updated to align with new order of analyses.
Reviewers: chandlerc, spatel, craig.topper
Reviewed By: chandlerc
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41203
llvm-svn: 320687
Work towards the unification of MIR and debug output by printing
`@foo` instead of `<ga:@foo>`.
Also print target flags in the MIR format since most of them are used on
global address operands.
Only debug syntax is affected.
llvm-svn: 320682
Recommitting rL319773, which was reverted due to a recursive issue
causing timeouts. This happened because I failed to check whether
the discovered loads could be narrowed further. In the case of a tree
with one or more narrow loads, that could not be further narrowed, as
well as a node that would need masking, an AND could be introduced
which could then be visited and recombined again with the same load.
This could again create the masking load, with would be combined
again... We now check that the load can be narrowed so that this
process stops.
Original commit message:
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D41177
llvm-svn: 320679
A v32i1 CONCAT_VECTORS of v16i1 uses promotion to v32i8 to legalize the v32i1. This results in a bunch of extract_vector_elts and a build_vector that ultimately gets scalarized.
This patch checks to see if v16i8 is legal and inserts a any_extend to that so that we can concat v16i8 to v32i8 and avoid creating the extracts.
llvm-svn: 320674
D30041 extended SCEVPredicateRewriter to improve handling of Phi nodes whose
update chain involves casts; PSCEV can now build an AddRecurrence for some
forms of such phi nodes, under the proper runtime overflow test. This means
that we can identify such phi nodes as an induction, and the loop-vectorizer
can now vectorize such inductions, however inefficiently. The vectorizer
doesn't know that it can ignore the casts, and so it vectorizes them.
This patch records the casts in the InductionDescriptor, so that they could
be marked to be ignored for cost calculation (we use VecValuesToIgnore for
that) and ignored for vectorization/widening/scalarization (i.e. treated as
TriviallyDead).
In addition to marking all these casts to be ignored, we also need to make
sure that each cast is mapped to the right vector value in the vector loop body
(be it a widened, vectorized, or scalarized induction). So whenever an
induction phi is mapped to a vector value (during vectorization/widening/
scalarization), we also map the respective cast instruction (if exists) to that
vector value. (If the phi-update sequence of an induction involves more than one
cast, then the above mapping to vector value is relevant only for the last cast
of the sequence as we allow only the "last cast" to be used outside the
induction update chain itself).
This is the last step in addressing PR30654.
llvm-svn: 320672
NFC.
Adding MC regressions tests to cover the AES and AVXAES ISA sets both 32 and 64 bit.
This patch is part of a larger task to cover MC encoding of all X86 ISA Sets.
started in revision: https://reviews.llvm.org/D39952
Reviewers: zvi, craig.topper, m_zuckerman, RKSimon
Differential Revision: https://reviews.llvm.org/D41154
Change-Id: I2564f9797628d0c070c4766f837f399337fb87d2
llvm-svn: 320670
If so go ahead and get the promoted input vector to extract from. Previously, we would create a bunch of any_extends of extract_vector_elts with illegal input type that needs to be promoted. The legalization of those extract_vector_elts would then potentially introduce a truncate. So now we have a bunch of any_extends of truncates. By legalizing both parts together we avoid creating these extra nodes.
The test changes seem to be because we were previously combining the build_vector with the any_extend before the any_extend got combined with the truncate.
llvm-svn: 320669
Factor out duplicated code emitting mach-o version-min specifiers.
This should be NFC but happens to fix a bug where the code in
MCMachoStreamer didn't take the version skew between darwin and macos
versions into account.
llvm-svn: 320666
LC_BUILD_VERSION is a new load command superseding the previously used
LC_XXX_MIN_VERSION commands. This adds an assembler directive along with
encoding/streaming support.
llvm-svn: 320661
Two issues were found about machine inst scheduler when compiling ProRender
with -g for amdgcn target:
GCNScheduleDAGMILive::schedule tries to update LiveIntervals for DBG_VALUE, which it
should not since DBG_VALUE is not mapped in LiveIntervals.
when DBG_VALUE is the last instruction of MBB, ScheduleDAGInstrs::buildSchedGraph and
ScheduleDAGMILive::scheduleMI does not move RPTracker properly, which causes assertion.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D41132
llvm-svn: 320650
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
Stores failed to decode at all since they didn't have a
DecoderNamespace set. Loads worked, but did not change
the register width displayed to match the numbmer of
enabled channels.
The number of printed registers for vaddr is still wrong,
but I don't think that's encoded in the instruction so
there's not much we can do about that.
Image atomics are still broken. MIMG is the same
encoding for SI/VI, but the image atomic classes
are split up into encoding specific versions unlike
every other MIMG instruction. They have isAsmParserOnly
set on them for some reason. dmask is also special for
these, so we probably should not have it as an explicit
operand as it is now.
llvm-svn: 320614
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perfom the
preversation was minimally altered and was simply marked
as preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements. One example is loop boundary threading.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
llvm-svn: 320612
w.r.t. the paper
"A Practical Improvement to the Partial Redundancy Elimination in SSA Form"
(https://sites.google.com/site/jongsoopark/home/ssapre.pdf)
Proper dominance check was missing here, so having a loopinfo should not be required.
Committing this diff as this fixes the bug, if there are
further concerns, I'll be happy to work on them.
Differential Revision: https://reviews.llvm.org/D39781
llvm-svn: 320607
Shrink wrapping should ignore DBG_VALUEs referring to frame indices,
since the presence of debug information must not affect code
generation.
Differential Revision: https://reviews.llvm.org/D41187
llvm-svn: 320606
The invocation without -no-output would try to lipo the different debug
objects together. This wouldn't work on platforms that don't provide
that utility.
llvm-svn: 320605
Threading was disabled in r317263 because it broke a test in combination
with `-DLLVM_ENABLE_THREADS=OFF`. This was because a ThreadPool warning
was piped to llvm-dwarfdump which was expecting to read an object from
stdin.
This patch re-enables threading and fixes the offending test.
Unfortunately this required more than just moving the ThreadPool out of
the for loop because of the TempFile refactoring that took place in the
meantime.
Differential revision: https://reviews.llvm.org/D41180
llvm-svn: 320601
The initial implementation of an MI SSA pass to reduce cr-logical operations.
Currently, the only operations handled by the pass are binary operations where
both CR-inputs come from the same block and the single use is a conditional
branch (also in the same block).
Committing this off by default to allow for a period of field testing. Will
enable it by default in a follow-up patch soon.
Differential Revision: https://reviews.llvm.org/D30431
llvm-svn: 320584
Unfortunately these aren't defined explicitly in the privileged spec, but the
GNU assembler does accept `sfence.vma` and `sfence.vma rs` as well as the
usual `sfence.vma rs, rt`.
llvm-svn: 320575
Pass the input vector through SimplifyDemandedBits as we only need the sign bit from each vector element of MOVMSK
We'd probably get more hits if SimplifyDemandedBits was better at handling vectors...
Differential Revision: https://reviews.llvm.org/D41119
llvm-svn: 320570
Adds the assembler aliases for the floating point instructions
which can be mapped to a single canonical instruction. The missing
pseudo instructions (flw, fld, fsw, fsd) are marked as TODO. Other
things, like for example PCREL_LO, have to be implemented first.
This patch builds upon D40902.
Differential Revision: https://reviews.llvm.org/D41071
Patch by Mario Werner.
llvm-svn: 320569
Francis Visoiu Mistrih