Summary: This aligns the library names used by the Makefile build to be the same as those create by the CMake build to make switching between the two easier. The only major difficulty was lldbHost which was one library in the CMake system and several in the Makefile system. Most of the other changes are trivial renames.
Reviewers: labath
Subscribers: emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11154
llvm-svn: 242196
For Hexagon we want to be able to call functions during debugging, however currently lldb only supports this when there is JIT support.
Although emulation using IR interpretation is an alternative, it is currently limited in that it can't make function calls.
In this patch we have extended the IR interpreter so that it can execute a function call on the target using register manipulation.
To do this we need to handle the Call IR instruction, passing arguments to a new thread plan and collecting any return values to pass back into the IR interpreter.
The new thread plan is needed to call an alternative ABI interface of "ABI::PerpareTrivialCall()", allowing more detailed information about arguments and return values.
Reviewers: jingham, spyffe
Subscribers: emaste, lldb-commits, ted, ADodds, deepak2427
Differential Revision: http://reviews.llvm.org/D9404
llvm-svn: 242137
Summary:
r241964 has added a dependency on uuid.h, which (on linux at least) necessitates instalation of a
new package. Since the only thing we need from that file is uuid_t (and this is already defined
in UuidCompatibility.h), we can avoid this dependency by making this include __APPLE__ specific.
If in future, we need more from this library, we can revisit this decision.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11135
llvm-svn: 242022
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
This commit moves the Windows DyanamicLoader to the common DynamicLoader
directory. This is required to remote debug Windows targets.
This commit also initializes the Windows DYLD plugin in
SystemInitializerCommon (similarly to both POSIX and MacOSX DYLD
plugins) so that we can automatically instantiate this class when
connected to a windows process.
Test Plan: Build.
Reviewers: zturner
Subscribers: lldb-commits, abdulras
Differential Revision: http://reviews.llvm.org/D10882
llvm-svn: 241697
* Add in-memory object file handling to the core dynamic loader
* Fix in memory object file handling in ObjectFileELF (previously
only part of the file was loaded before parsing)
* Fix load address setting in ObjectFileELF for 32-bit targets
when the load bias is negative
* Change hack in DYLDRendezvous.cpp to be more specific and not to
interfere with object files with fixed load address
Differential revision: http://reviews.llvm.org/D10800
llvm-svn: 241057
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
Summary:
Update DYLDRendezvous and SOEntry to use FileSpecs instead of storing paths as
strings, which caused incorrect comparison results due to denormalization.
Reviewers: clayborg, vharron, ovyalov
Reviewed By: ovyalov
Subscribers: jwolfe, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10267
llvm-svn: 239195
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
breakpoint only if the process it was for is still alive. We need to always remove this because
it has a pointer to the old loader, and if we ever hit it we will crash. I also put in a sanity
check in the callback function to make sure we don't invoke it if the process is wrong.
<rdar://problem/21006189>
llvm-svn: 237866
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
For PIE executables the type of the main executable is shared object
so we can't force that the main executable should have the type of
executable.
llvm-svn: 236870
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
This includes following:
# Add a missing Process argument when calling GetSharedModule in DynamicLoaderDarwinKernel::KextImageInfo::LoadImageUsingMemoryModule
# Fix PlatformDarwinKernel::GetSharedModule prototype
llvm-svn: 233084
Summary:
Saw this while reading some code in DynamicLoader classes. Looks like this has
been a FIXME since 2011 at least.
Test Plan: Run unit tests.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8558
llvm-svn: 232983
Summary:
This has been discovered while experimenting with the gecko linker on android.
In general, assert()'ing on "user input" is a bad idea.
Test Plan: Run unit tests.
Reviewers: clayborg, tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8495
llvm-svn: 232966
* On Android (at least on platfrom-21 x86) the dynamic linker reports the
executable with its full path
* Use the platform path of the executable when storing it into the cache
(used to identify the SO entry for the executable) as this is the path
what will be reported by the dynamic linker. If the platform path isn't
set (local debugging) then it falls back to the normal file path.
Differential revision: http://reviews.llvm.org/D8296
llvm-svn: 232158
kernel debug session, instead of issuing a warning (which on one ever
sees), drop the user-specified kernel binary Module from the target and
try to discover the correct one dynamically.
<rdar://problem/19450329>
llvm-svn: 231885
This continues the effort to reduce header footprint and improve
build speed by removing clang and other unnecessary headers
from Target.h. In one case, some headers were included solely
for the purpose of declaring a nested class in Target, which was
not needed by anybody outside the class. In this case the
definition and implementation of the nested class were isolated
in the .cpp file so the header could be removed.
llvm-svn: 231107
This is part of a larger effort to reduce header file footprints.
Combined, these patches reduce the build time of LLDB locally by
over 30%. However, they touch many files and make many changes,
so will be submitted in small incremental pieces.
Reviewed By: Greg Clayton
Differential Revision: http://reviews.llvm.org/D8022
llvm-svn: 231097
Background: dyld binaries often have extra symbols in their symbol table like "malloc" and "free" for the early bringup of dyld and we often don't want to set breakpoints in dynamic linker binaries. We also don't want to call the "malloc" or "free" function in dyld when a user writes an expression like "(void *)malloc(123)" so we need to avoid doing name lookups in dyld. We mark Modules as being dynamic link editors and this helps do correct lookups for breakpoints by name and function lookups.
<rdar://problem/19716267>
llvm-svn: 228261
Summary:
The Android dynamic linker reports only the basename of each SO entry, so for
the above check to be successful, we need to compare it to the basename of the
main executable.
This also has a nasty side-effect when working with older version of
Android (verified on platform version 16), and debugging PIE
executables: the dynamic linker has a bug and reports the load address
of the main executable (which is a shared object, because PIE) to be 0.
We then try to update the list of loaded sections for all shared
objects, including the main executable, and set the load address to 0,
which breaks everything that relies on resolving addresses in the main
executable (breakpoints, stepping, etc). This commit also fixes that broken
behavior when debugging on older Androids. This bug doesn't happen on newer
Android versions (verified for Android L).
Test Plan: Run test suite on linux.
Reviewers: clayborg, tfiala, richard.mitton
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7188
llvm-svn: 228057
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
This change adds some logging around dynamic loader handling.
It also fixes an issue where the dynamic loader entry breakpoint can end
up being re-inserted, showing the wrong (i.e. software breakpoint) instruction
at the stop location when a backtrace is displayed at program startup.
I discussed with Jim Ingham a few weeks back. Essentially the
one-hit breakpoints need to make it back to public state handling before
the software breakpoint gets cleared. The flow I was hitting was that
the breakpoint would get set, it would get hit, it would get cleared to
step over, then it would get reapplied, when we never wanted it reapplied.
Stops at the beginning of execution would then show backtraces with
software breakpoint instructions in it, erroneously. This change fixes it.
There might be a more elegant way to do this, or a flow change somewhere else
to avoid, but it does fix an issue I experienced in startup breakpoint handling.
llvm-svn: 219371
that would clear the module list, and then put it back by hand. But we forgot to
also put its sections back in the target SectionList, so we would jettison it as
unloaded when we finished handling the first real load event. Add its sections.
<rdar://problem/18385947>
llvm-svn: 218156
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
Covers more of the behavior of rendezvous breakpoint handling and other
dynamic loader aspects, all on the 'enable log lldb dyld' log channel.
llvm-svn: 217283
Keno Fischer