The new naming is (to me) much easier to understand. Here is a summary
of the new state of the world:
- '*Threshold' is the threshold for full unrolling. It is measured
against the estimated unrolled cost as computed by getUserCost in TTI
(or CodeMetrics, etc). We will exceed this threshold when unrolling
loops where unrolling exposes a significant degree of simplification
of the logic within the loop.
- '*PercentDynamicCostSavedThreshold' is the percentage of the loop's
estimated dynamic execution cost which needs to be saved by unrolling
to apply a discount to the estimated unrolled cost.
- '*DynamicCostSavingsDiscount' is the discount applied to the estimated
unrolling cost when the dynamic savings are expected to be high.
When actually analyzing the loop, we now produce both an estimated
unrolled cost, and an estimated rolled cost. The rolled cost is notably
a dynamic estimate based on our analysis of the expected execution of
each iteration.
While we're still working to build up the infrastructure for making
these estimates, to me it is much more clear *how* to make them better
when they have reasonably descriptive names. For example, we may want to
apply estimated (from heuristics or profiles) dynamic execution weights
to the *dynamic* cost estimates. If we start doing that, we would also
need to track the static unrolled cost and the dynamic unrolled cost, as
only the latter could reasonably be weighted by profile information.
This patch is sadly not without functionality change for the new unroll
analysis logic. Buried in the heuristic management were several things
that surprised me. For example, we never subtracted the optimized
instruction count off when comparing against the unroll heursistics!
I don't know if this just got lost somewhere along the way or what, but
with the new accounting of things, this is much easier to keep track of
and we use the post-simplification cost estimate to compare to the
thresholds, and use the dynamic cost reduction ratio to select whether
we can exceed the baseline threshold.
The old values of these flags also don't necessarily make sense. My
impression is that none of these thresholds or discounts have been tuned
yet, and so they're just arbitrary placehold numbers. As such, I've not
bothered to adjust for the fact that this is now a discount and not
a tow-tier threshold model. We need to tune all these values once the
logic is ready to be enabled.
Differential Revision: http://reviews.llvm.org/D9966
llvm-svn: 239164
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
llvm-svn: 239151
Add getFPUFeatures to TargetParser, which gets the list of subtarget features
that are enabled/disabled for each FPU, and use it when handling the .fpu
directive.
No functional change in this commit, though clang will start behaving
differently once it starts using this.
Differential Revision: http://reviews.llvm.org/D10237
llvm-svn: 239150
Summary:
Only restoring AvailableFeatures is not enough and will lead to buggy behaviour.
For example, if we have a feature enabled and we ".set pop", the next time we try
to ".set" that feature nothing will happen because the "!(STI.getFeatureBits()[Feature])"
check will be false, because we didn't restore STI.FeatureBits.
In order to fix this, we need to make MipsAssemblerOptions remember the STI.FeatureBits
instead of the AvailableFeatures and then regenerate AvailableFeatures each time we ".set pop".
This is because, AFAIK, there is no way to convert from AvailableFeatures back to STI.FeatureBits,
but the reverse is possible by using ComputeAvailableFeatures(STI.FeatureBits).
I also moved the updating of AssemblerOptions inside the "if" statement in
setFeatureBits() and clearFeatureBits(), as there is no reason to update if
nothing changes.
Reviewers: dsanders, mkuper
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9156
llvm-svn: 239144
When we generate coverage data, we explicitly set each coverage map's
alignment to 8 (See InstrProfiling::lowerCoverageData), but when we
read the coverage data, we assume consecutive maps are exactly
adjacent. When we're dealing with 32 bit, maps can end on a 4 byte
boundary, causing us to think the padding is part of the next record.
Fix this by adjusting the buffer to an appropriately aligned address
between records.
This is pretty awkward to test, as it requires a binary with multiple
coverage maps to hit, so we'd need to check in multiple source files
and a binary blob as inputs.
llvm-svn: 239129
Apparently this functionality isn't used in-tree (or I would go & make
the explicit unique_ptr constructions into implicit constructions to
make them more self documenting now that clone doesn't return a raw
owning pointer anymore) but only by the Julia frontend. This isn't
ideal.
llvm-svn: 239091
Originally committed in r237975, GCC 4.7 gave a compilation error
regarding "looser throw specification" though it seemed to be pointing
to a virtual defaulted dtor in a base class and an override defaulted
dtor in a derived class - so I'm not quite sure why/how they could end
up with different throw specifications. To simplify and reduce the risk
of this, I've just removed the pointless override in the derived class,
the base class's should be sufficient. *fingers crossed*
llvm-svn: 239088
Now that we can look at users, we can trivially do this: when we would
have otherwise disabled GlobalMerge (currently -O<3), we can just run
it for minsize functions, as it's usually a codesize win.
Differential Revision: http://reviews.llvm.org/D10054
llvm-svn: 239087
Fix the FIXME and remove this old as(1) compat option. It was useful for
bringup of the integrated assembler to diff object files, but now it's
just causing more relocations than strictly necessary to be generated.
rdar://21201804
llvm-svn: 239084
I made a few changes here in a couple of commits - breaking them out
into smaller ones in case I hit the GCC oddities again.
I'm still not /entirely/ sure what the issues were, so apologies if any
of these experiments break things again. Feel free to revert
immediately.
llvm-svn: 239083
Summary:
Properly report the error in segment load commands from MachOObjectFile
constructor instead of crashing the program.
Adjust the test case accordingly.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239081
Summary:
Currently all load commands are parsed in MachOObjectFile constructor.
If the next load command cannot be parsed, or if command size is too
small, properly report it through the error code and fail to construct
the object, instead of crashing the program.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239080
Summary:
Avoid parsing object file each time MachOObjectFile::getHeader() is
called. Instead, cache the header in MachOObjectFile constructor, where
it's parsed anyway. In future, we must avoid constructing the object
at all if the header can't be parsed.
Test Plan: regression test suite.
Reviewers: rafael
Subscribers: llvm-commits
llvm-svn: 239075
Summary:
-march=bpf -> host endian
-march=bpf_le -> little endian
-match=bpf_be -> big endian
Test Plan:
v1 was tested by IBM s390 guys and appears to be working there.
It bit rots too fast here.
Reviewers: chandlerc, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10177
llvm-svn: 239071
Summary:
This is the first of several patches to eliminate StringRef forms of GNU
triples from the internals of LLVM. After this is complete, GNU triples
will be replaced by a more authoratitive representation in the form of
an LLVM TargetTuple.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: ted, llvm-commits, rengolin, jholewinski
Differential Revision: http://reviews.llvm.org/D10236
llvm-svn: 239036
The fix is just that getOther had not been updated for packing the st_other
values in fewer bits and could return spurious values:
- unsigned Other = (getFlags() & (0x3f << ELF_STO_Shift)) >> ELF_STO_Shift;
+ unsigned Other = (getFlags() & (0x7 << ELF_STO_Shift)) >> ELF_STO_Shift;
Original message:
Pack the MCSymbolELF bit fields into MCSymbol's Flags.
This reduces MCSymolfELF from 64 bytes to 56 bytes on x86_64.
While at it, also make getOther/setOther easier to use by accepting unshifted
STO_* values.
llvm-svn: 239012
This reduces MCSymolfELF from 64 bytes to 56 bytes on x86_64.
While at it, also make getOther/setOther easier to use by accepting unshifted
STO_* values.
llvm-svn: 239006
port it to the new pass manager.
All this does is extract the inner "location" class used by AA into its
own full fledged type. This seems *much* cleaner as MemoryDependence and
soon MemorySSA also use this heavily, and it doesn't make much sense
being inside the AA infrastructure.
This will also make it much easier to break apart the AA infrastructure
into something that stands on its own rather than using the analysis
group design.
There are a few places where this makes APIs not make sense -- they were
taking an AliasAnalysis pointer just to build locations. I'll try to
clean those up in follow-up commits.
Differential Revision: http://reviews.llvm.org/D10228
llvm-svn: 239003
The first try (r238051) to land this was reverted due to ExecutionEngine build failure;
that was hopefully addressed by r238788.
The second try (r238842) to land this was reverted due to BUILD_SHARED_LIBS failure;
that was hopefully addressed by r238953.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 239001
Summary:
Now users don't have to manually deal with getFirstLoadCommandInfo() /
getNextLoadCommandInfo(), calculate the number of load segments, etc.
No functionality change.
Test Plan: regression test suite
Reviewers: rafael, lhames, loladiro
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10144
llvm-svn: 238983
This avoids yet another last minute patching of the binding.
While at it, also simplify the weakref implementation a bit by not walking
past it in the expression evaluation.
llvm-svn: 238982
With this getBinging can now return the correct answer for all cases not
involving a .symver and the elf writer doesn't need to patch it last minute.
llvm-svn: 238980
AVX-512: Implemented GETEXP instruction for KNL and SKX
Added rounding mode modifier for SQRTPS/PD
Added tests for encoding and intrinsics.
CR:
http://reviews.llvm.org/D9991
llvm-svn: 238923
Summary:
But still handle them the same way since I don't know how they differ on
this target.
Of these, /U[qytnms]/ do not have backend tests but are accepted by clang.
No functional change intended.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8203
llvm-svn: 238921
The ELF spec is very clear:
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
llvm-svn: 238899
Some temporary symbols are created by MC itself. These symbols are never used
for lookup and are never included in the object symbol table, so we can
avoid creating a name for them.
Other temporaries are created by CodeGen or by the user by explicitly asking
for a name starting with .L (or L on MachO).
These temporaries behave like regular symbols, we just try to avoid including
them in the object symbol table, but sometimes they end up there:
const char *foo() {
return "abc" + 3;
}
will have a relocation pointing to a .L symbol.
It just so happens that almost all MC created temporary has the AlwaysAddSuffix
option and CodeGen/user created ones don't.
One interesting future optimization would be to use unnamed symbols for
all temporaries, but that would require use an st_name of 0 or
having the object writer create the names if a symbol does end up in the
symbol table.
No testcase since this just avoid creating a few extra names for MC created
temporaries.
llvm-svn: 238887
Summary:
A later change that has RewriteStatepointsForGC change function
attributes throughout the module depends on this.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10104
llvm-svn: 238882
The first try (r238051) to land this was reverted due to bot failures
that were hopefully addressed by r238788.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 238842
This create a MCSymbolELF class and moves SymbolSize since only ELF
needs a size expression.
This reduces the size of MCSymbol from 56 to 48 bytes.
llvm-svn: 238801
This allows us to extract version numbers from the environment.
getOSVersion is currently overloaded for that purpose, this allows us to
clean it up.
llvm-svn: 238796
LLVMContext. Production builds of clang do not set names on most
Value's, so this is wasted space on almost all subclasses of Value.
This reduces the size of all Value subclasses by 8 bytes on 64 bit
hosts.
The one tricky part of this change is averting compile time regression
by keeping Value::hasName() fast. This required stealing bits out of
NumOperands.
With this change, peak memory usage on verify-uselistorder-nodbg.lto.bc
is decreased by approximately 2.3% (~3MB absolute on my machine).
llvm-svn: 238791
If a dead instruction we may not only have a last-use in the main live
range but also in a subregister range if subregisters are tracked. We
need to partially rebuild live ranges in both cases.
The testcase only broke when subregister liveness was enabled. I
commited it in the current form because there is currently no flag to
enable/disable subregister liveness.
This fixes PR23720.
llvm-svn: 238785
Start using C++ types such as StringRef and MemoryBuffer in the C++ LTO
API. In doing so, clarify the ownership of the native object file: the caller
now owns it, not the LTOCodeGenerator. The C libLTO library has been modified
to use a derived class of LTOCodeGenerator that owns the object file.
Differential Revision: http://reviews.llvm.org/D10114
llvm-svn: 238776
According to the TBAA description struct-path tag node can have an optional IsConstant field. Add corresponding argument to MDBuilder::createTBAAStructTagNode.
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D10160
llvm-svn: 238749
This is important because of different addressing modes
depending on the address space for GPU targets.
This only adds the argument, and does not update
any of the uses to provide the correct address space.
llvm-svn: 238723
Alternatively, this type could be derived on-demand whenever
getResultElementType is called - if someone thinks that's the better
choice (simple time/space tradeoff), I'm happy to give it a go.
llvm-svn: 238716
There is no MCSectionData, so the old name is now meaningless.
Also remove some asserts/checks that were there just because the information
they used was in MCSectionData.
llvm-svn: 238708
Unreachable values may use themselves in strange ways due to their
dominance property. Attempting to translate through them can lead to
infinite recursion, crashing LLVM. Instead, claim that we weren't able
to translate the value.
This fixes PR23096.
llvm-svn: 238702
This fixes a bug in the line info handling in the dwarf code, based on a
problem I when implementing RelocVisitor support for MachO.
Since addr+size will give the first address past the end of the function,
we need to back up one line table entry. Fix this by looking up the
end_addr-1, which is the last address in the range. Note that this also
removes a duplicate output from the llvm-rtdyld line table dump. The
relevant line is the end_sequence one in the line table and has an offset
of the first address part the end of the range and hence should not be
included.
Also factor out the common functionality into a separate function.
This comes up on MachO much more than on ELF, since MachO
doesn't store the symbol size separately, hence making
said situation always occur.
Differential Revision: http://reviews.llvm.org/D9925
llvm-svn: 238699
This commit adds partial support for MachO relocations to RelocVisitor.
A simple test case is added to show that relocations are indeed being
applied and that using llvm-dwarfdump on MachO files no longer errors.
Correctness is not yet tested, due to an unrelated bug in DebugInfo,
which will be fixed with appropriate testcase in a followup commit.
Differential Revision: http://reviews.llvm.org/D8148
llvm-svn: 238663
The plan was to move the whole table into the already existing ArchExtNames
but some fields depend on a table-generated file, and we don't yet have this
feature in the generic lib/Support side.
Once the minimum target-specific table-generated files are available in a
generic fashion to these libraries, we'll have to keep it in the ASM parser.
llvm-svn: 238651
typeIsConvertibleTo was just calling baseClassOf(this) on the argument passed to it, but there weren't different signatures for baseClassOf so passing 'this' didn't really do anything interesting. typeIsConvertibleTo could have just been a non-virtual method in RecTy. But since that would be kind of a silly method, I instead re-distributed the logic from baseClassOf into typeIsConvertibleTo.
llvm-svn: 238648
.safeseh adds an entry to the .sxdata section to register all the
appropriate functions which may handle an exception. This entry is not
a relocation to the symbol but instead the symbol table index of the
function.
llvm-svn: 238641
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
llvm-svn: 238584
Summary:
In continuation to an earlier commit to DependenceAnalysis.cpp by jingyue (r222100), the type for all subscripts in a coupled group need to be the same since constraints from one subscript may be propagated to another during testing. During testing, new SCEVs may be created and the operands for these need to be the same.
This patch extends unifySubscriptType() to work on lists of subscript pairs, ensuring a common extended type for all of them.
Test Plan:
Added a test case to NonCanonicalizedSubscript.ll which causes dependence analysis to crash without this fix.
All regression tests pass.
Reviewers: spop, sebpop, jingyue
Reviewed By: jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9698
llvm-svn: 238573
MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
llvm-svn: 238539
About pristine regsiters:
Pristine registers "hold a value that is useless to the current
function, but that must be preserved - they are callee saved registers
that have not been saved." This concept saves compile time as it frees
the prologue/epilogue inserter from adding every such register to every
basic blocks live-in list.
However the current code in getPristineRegs is formulated in a
complicated way: Inside the function prologue and epilogue all callee
saves are considered pristine, while in the rest of the code only the
non-saved ones are considered pristine. This requires logic to
differentiate between prologue/epilogue and the rest and in the presence
of shrink-wrapping this even becomes complicated/expensive. It's also
unnecessary because the prologue epilogue inserters already mark
callee-save registers that are saved/restores properly in the respective
blocks in the prologue/epilogue (see updateLiveness() in
PrologueEpilogueInserter.cpp). So only declaring non-saved/restored
callee saved registers as pristine just works.
Differential Revision: http://reviews.llvm.org/D10101
llvm-svn: 238524
This commit introduces a serializable structure called
'llvm::yaml::MachineFunction' that stores the machine
function's name. This structure will mirror the machine
function's state in the future.
This commit prints machine functions as YAML documents
containing a YAML mapping that stores the state of a machine
function. This commit also parses the YAML documents
that contain the machine functions.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9841
llvm-svn: 238519
Need non-const iterator inserts too. These failures seem to be due to differences in the versions of libstdc++ on various operating systems.
llvm-svn: 238516
This moves all the state numbering code for C++ EH to WinEHPrepare so
that we can call it from the X86 state numbering IR pass that runs
before isel.
Now we just call the same state numbering machinery and insert a bunch
of stores. It also populates MachineModuleInfo with information about
the current function.
llvm-svn: 238514
Originally landed r238485
MSVC resolves identifiers differently from Clang and GCC, this resulted in build bot failures. This pach re-lands r238485 and fixes the build failures.
llvm-svn: 238505
Summary: This isn't necessarily an ideal change, and I want to at least reduce the API surface area, but for the new API we really shouldn't be relying on cl::list being a std::vector.
Reviewers: chandlerc
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10093
llvm-svn: 238485
BranchProbabilityInfo was leaking 3MB of memory when running 'opt -O2 verify-uselistorder.lto.bc'. This was due to the Weights member not being cleared once the pass is no longer needed.
This adds the releaseMemory override to clear that field. The other fields are cleared at the end of runOnFunction so can stay there.
llvm-svn: 238462
GCC seems to have some overzealous warnings about strict aliasing.
Rafael reports that this patch suppresses them on GCC 4.9, and I'm
hoping this will work for GCC 4.7 as well. I'll watch [1] and iterate
if necessary.
[1]: http://bb.pgr.jp/builders/clang-3stage-x86_64-linux/builds/8597
llvm-svn: 238447
shrinking the Size and NumDefs fields to offset the size growth, and
reordering the fields to preserve a good packing.
This is necessary in the short term for adding a convergent flag, and
simultaneously future-proofs us against more flags being added in the
future.
llvm-svn: 238445
This adds support for the 64-bit DWARF format, but is still limited to
less than 4GB of debug data by the DataExtractor class. Some versions
of the GNU MIPS toolchain generate 64-Bit DWARF even though it isn't
actually necessary.
Differential Revision: http://reviews.llvm.org/D1988
llvm-svn: 238434
Change `DIE::addChild()` to return a reference to the just-added node,
and update consumers to use it directly. An upcoming commit will
abstract away (and eventually change) the underlying storage of
`DIE::Children`.
llvm-svn: 238372
Stop storing a `DIEAbbrev` in `DIE`, since the data fits neatly inside
the `DIEValue` list. Besides being a cleaner data structure (avoiding
the parallel arrays), this gives us more freedom to rearrange the
`DIEValue` list.
This fixes the temporary memory regression from 845 MB up to 879 MB, and
drops it further to 829 MB for a net memory decrease of around 1.9%
(incremental decrease around 5.7%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238364
This reverts commit r238350, effectively reapplying r238349 after fixing
(all?) the problems, all somehow related to how I was using
`AlignedArrayCharUnion<>` inside `DIEValue`:
- MSVC can only handle `sizeof()` on types, not values. Change the
assert.
- GCC doesn't know the `is_trivially_copyable` type trait. Instead of
asserting it, add destructors.
- Call placement new even when constructing POD (i.e., the pointers).
- Instead of copying the char buffer, copy the casted classes.
I've left in a couple of `static_assert`s that I think both MSVC and GCC
know how to handle. If the bots disagree with me, I'll remove them.
- Check that the constructed type is either standard layout or a
pointer. This protects against a programming error: we really want
the "small" `DIEValue`s to be small and simple, so don't
accidentally change them not to be.
- Similarly, check that the size of the buffer is no bigger than a
`uint64_t` or a pointer. (I thought checking against
`sizeof(uint64_t)` would be good enough, but Chandler suggested that
pointers might sometimes be bigger than that in the context of
sanitizers.)
I've also committed r238359 in the meantime, which introduces a
DIEValue.def to simplify dispatching between the various types (thanks
to a review comment by David Blaikie). Without that, this commit would
be almost unintelligible.
Here's the original commit message:
--
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
--
llvm-svn: 238362
Both MCStreamer and MCObjectStreamer were maintaining a current section
variable and they were slightly out of sync. I don't think this was observable,
but was inefficient and error prone.
Changing this requires a few cascading changes:
* SwitchSection has to call ChangeSection earlier for ChangeSection to see
the old section.
* With that change, ChangeSection cannot call EmitLabel, since during
ChangeSection we are still in the old section.
* When the object streamer requires a begin label, just reused the existing
generic support for begin labels instead of calling EmitLabel directly.
llvm-svn: 238357
This reverts commit r238349, since it caused some errors on bots:
- std::is_trivially_copyable isn't available until GCC 5.0.
- It was complaining about strict aliasing with my use of
ArrayCharUnion.
llvm-svn: 238350
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238349
An upcoming commit will switch to storing `DIEValue`s by value in a
`DIE`, so move the `DIE` down below all the subclasses it can. Two
subclasses inherit from `DIE`, so drop those down below `DIE`.
`DIEValue` will become a discriminated union, which contains an instance
of one of the classes that are currently subclasses. "Big" ones, such
as those that inherit from `DIE`, will continue to be stored by pointer.
This commit does as much of the code motion ahead of time as possible.
llvm-svn: 238346
Now that most of the methods in Clang and LLVM that were parsing arch/cpu/fpu
strings are using ARMTargetParser, it's time to make it a bit more conforming
with what the ABI says.
This commit adds some clarification on what build attributes are accepted and
which are "non-standard". It also makes clear that the "defaultCPU" and
"defaultArch" methods were really just build attribute getters.
It also diverges from GCC's behaviour to say that armv2/armv3 are really an
ARMv4 in the build attributes, when the ABI has a clear state for that: Pre-v4.
llvm-svn: 238344
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 238341
manager arguments...
I have no idea why, but compilers seem to hate this and its late, so I'm
not going to debug it. :: sigh :: This is why we can't have nice things.
llvm-svn: 238306
when invoking run methods.
This technique was suggested by Dinesh Dwivedi who also wrote the
original patch. During the code review, they explained to me that this
isn't a fully general technique as we need to know the signatures of the
method candidates. Since this is really a narrower utility, I switched
the names and structure to be more clearly a specialized run method
invoke helper and commented it accordingly. I still think this is
a pretty big win.
Very sorry to Dinesh for the extreme delay in landing this patch. I've
been far to busy poking at other things.
Original review: http://reviews.llvm.org/D3543
llvm-svn: 238305
This broke the llvm-mips-linux builder and several of our out-of-tree builders.
Initial investigations show that the commit probably isn't the problem but
reverting anyway while I investigate.
llvm-svn: 238302
- Clean documentation comment
- Change the API to accept an iterator so you can actually pass
MachineBasicBlock::end() now.
- Add more "const".
llvm-svn: 238288
While working on another change, I noticed that the naming in this function was mildly deceptive. While fixing that, I took the oppurtunity to modernize some of the code. NFC intended.
llvm-svn: 238252
remove ExecutionEngine's dependence on CodeGen. NFC.
This is a follow-up to r238080.
Differential Revision: http://reviews.llvm.org/D9830
llvm-svn: 238244
This is to fix problems introduced by r232481. For HSAIL,
this function does essentially nothing desirable, and
injects unwanted / incorrect stuff before the function.
The only thing it really needs to do is call EmitFunctionEntryLabel
in this case.
llvm-svn: 238222
If there is an InstAlias defined for an instruction that had a custom
converter (AsmMatchConverter), then when the alias is matched,
the custom converter will be used rather than the converter generated
by the InstAlias.
This patch adds the UseInstAsmMatchConverter field to the InstAlias
class, which allows you to override this behavior and force the
converter generated by the InstAlias to be used.
This is required for some future improvemnts to the R600 assembler.
Differential Revision: http://reviews.llvm.org/D9083
llvm-svn: 238210
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first several times this was committed (e.g. r229831, r233055), it caused several buildbot failures.
Apparently the reason for most failures was both clang and gcc's inability to deal with large numbers (> 10K) of bitset constructor calls in tablegen-generated initializers of instruction info tables.
This should now be fixed.
llvm-svn: 238192
Summary:
Following on from r209907 which made personality encodings indirect, do the
same for TType encodings. This fixes the case where a try/catch block needs
to generate references to, for example, std::exception in the
.gcc_except_table.
This commit uses DW_EH_PE_sdata8 for N64 as far as is possible at the moment.
However, it is possible to end up with DW_EH_PE_sdata4 when a TargetMachine is
not available. There's no risk of issues with inconsistency here since the
tables are self describing but it does mean there is a small chance of the
PC-relative offset being out of range for particularly large programs.
Reviewers: petarj
Reviewed By: petarj
Subscribers: srhines, joerg, tberghammer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9669
llvm-svn: 238190
in POWER8:
vadduqm
vaddeuqm
vaddcuq
vaddecuq
vsubuqm
vsubeuqm
vsubcuq
vsubecuq
In addition to adding the instructions themselves, it also adds support for the
v1i128 type for intrinsics (Intrinsics.td, Function.cpp, and
IntrinsicEmitter.cpp).
http://reviews.llvm.org/D9081
llvm-svn: 238144
Stop creating symbols we don't need in `DwarfStringPool`. The consumers
only call `DwarfStringPoolEntryRef::getSymbol()` when DWARF is
relocatable, so this just stops creating the unused symbols when it's
not. This drops memory usage from 851 MB to 845 MB, around 0.7%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238122
Mint a new function, `AsmPrinter::emitDwarfStringOffset()`, which takes
a `DwarfStringPoolEntryRef`. When DWARF is relocatable across sections,
this defers to `emitSectionOffset()` and emits the `MCSymbol`;
otherwise, just emit the offset directly, without using any intermediate
symbols.
`EmitLabelDifference()` is already optimized to emit absolute label
differences cheaply when possible, so there aren't any major memory
savings here (853 MB down to 851 MB, or 0.2%). However, it prepares for
making the `MCSymbol`s in the `DwarfStringPool` optional.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238119
Expose the `DwarfStringPool` entry in a header, and store a pointer to
it directly in `DIEString`. Instead of choosing at creation time how to
emit it, use the `dwarf::Form` to determine that at emission time.
Besides avoiding the other `DIEValue`, this shaves two pointers off of
`DIEString`; the data is now a single pointer. This is a nice cleanup
on its own -- and drops memory usage from 861 MB down to 853 MB, around
0.9% -- but it's also preparation for passing `DIEValue`s by value.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238117
Extract out `DwarfStringPoolEntry` and `DwarfStringPoolRef` from
`DwarfStringPool` so that downstream users can start using
`DwarfStringPool::getEntry()` directly. This will allow users to delay
the decision between emitting a symbol or an offset until later.
llvm-svn: 238116
Android's API-9 SDK is missing log2 builtins. A previous commit added
support for building against this API revision but this requires log2l
to be present. (And it doesn't seem to be defined, despite being in
the headers.)
Author: pasaulais (Pierre-Andre Saulais)
Differential Revision: http://reviews.llvm.org/D9884
llvm-svn: 238111
On GPU targets, materializing constants is cheap and stores are
expensive, so only doing this for zero vectors was silly.
Most of the new testcases aren't optimally merged, and are for
later improvements.
llvm-svn: 238108
In preparation for adding support for decoding DF_FLAGS_1 to
llvm-readobj.
Differential Revision: http://reviews.llvm.org/D9955
Reviewed by: echristo
llvm-svn: 238107
Remove all virtual functions from `DIEValue`, dropping the vtable
pointer from its layout. Instead, create "impl" functions on the
subclasses, and use the `DIEValue::Type` to implement the dynamic
dispatch.
This is necessary -- obviously not sufficient -- for passing `DIEValue`s
around by value. However, this change stands on its own: we make tons
of these. I measured a drop in memory usage from 888 MB down to 860 MB,
or around 3.2%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238084
This is part of the work to remove TargetMachine::resetTargetOptions.
In this patch, instead of updating global variable NoFramePointerElim in
resetTargetOptions, its use in DisableFramePointerElim is replaced with a call
to TargetFrameLowering::noFramePointerElim. This function determines on a
per-function basis if frame pointer elimination should be disabled.
There is no change in functionality except that cl:opt option "disable-fp-elim"
can now override function attribute "no-frame-pointer-elim".
llvm-svn: 238080
This patch extends EarlyCSE to take advantage of the information that a controlling branch gives us about the value of a Value within this and dominated basic blocks. If the current block has a single predecessor with a controlling branch, we can infer what the branch condition must have been to execute this block. The actual change to support this is downright simple because EarlyCSE's existing scoped hash table logic deals with most of the complexity around merging.
The patch actually implements two optimizations.
1) The first is analogous to JumpThreading in that it enables EarlyCSE's CSE handling to fold branches which are exactly redundant due to a previous branch to branches on constants. (It doesn't actually replace the branch or change the CFG.) This is pretty clearly a win since it enables substantial CFG simplification before we start trying to inline.
2) The second is analogous to CVP in that it exploits the knowledge gained to replace dominated *uses* of the original value. EarlyCSE does not otherwise reason about specific uses, so this is the more arguable one. It does enable further simplication and constant folding within the rest of the visit by EarlyCSE.
In both cases, the added code only handles the easy dominance based case of each optimization. The general case is deferred to the existing passes.
Differential Revision: http://reviews.llvm.org/D9763
llvm-svn: 238071
This patch adds a class for processing many recip codegen possibilities.
The TargetRecip class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 238051
This allows us to match armv6m to default to thumb, but will also be used by
Clang's driver and remove the current incomplete copy in it.
llvm-svn: 238036
This change to VirtRegRewriter::addMBBLiveIns adds live-in registers for each
MachineBasicBlock's LiveIns set without isLiveIn checks as they are being added
because doing so is expensive. After all live-in registers are added, the LiveIn
vectors are sorted and uniqued.
llvm-svn: 238008
Shave a pointer off of `MCSymbolName` by storing `StringMapEntry<bool>*`
instead of `StringRef`. This brings `sizeof(MCSymbol)` down to 64 on
64-bit platforms, a nice round number. My profile showed memory
dropping from 914 MB down to 908 MB, roughly 0.7%. Other than memory
usage, no functionality change here.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238005
Save a pointer for each `MCSymbol`, bringing `llc` memory usage down
from 920 MB to 914 MB, around ~0.6%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238003
llvm/include/llvm/DebugInfo/DIContext.h:144:11: error: overriding ‘virtual llvm::LoadedObjectInfo::~LoadedObjectInfo() noexcept (true)’
It seems the destructor in the base class may not be "default".
llvm-svn: 238000
Previously `SDDbgValue`s used the general allocator that lives for all
of `SelectionDAG`. Instead, give them their own allocator, and reset it
whenever `SDDbgInfo::clear()` is called, plugging a spiritual leak.
This drops `SelectionDAGBuilder::visitIntrinsicCall()` off of my heap
profile (was at around 2% of `llc` for codegen of `-flto -g`). Thanks
to Pete Cooper for spotting the problem and suggesting the fix.
llvm-svn: 237998
As noted in the original review, this is unused in tree & is used by
Julia... that's problematic. This API coudl easily be deleted/modified
by accident without any validation that it remains correct.
llvm-svn: 237976
Summary:
This supersedes http://reviews.llvm.org/D4010, hopefully properly
dealing with the JIT case and also adds an actual test case.
DwarfContext was basically already usable for the JIT (and back when
we were overwriting ELF files it actually worked out of the box by
accident), but in order to resolve relocations correctly it needs
to know the load address of the section.
Rather than trying to get this out of the ObjectFile or requiring
the user to create a new ObjectFile just to get some debug info,
this adds the capability to pass in that info directly.
As part of this I separated out part of the LoadedObjectInfo struct
from RuntimeDyld, since it is now required at a higher layer.
Reviewers: lhames, echristo
Reviewed By: echristo
Subscribers: vtjnash, friss, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D6961
llvm-svn: 237961
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
llvm-svn: 237958
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237954
so DWARF skeleton CUs can be expression in IR. A skeleton CU is a
(typically empty) DW_TAG_compile_unit that has a DW_AT_(GNU)_dwo_name and
a DW_AT_(GNU)_dwo_id attribute. It is used to refer to external debug info.
This is a prerequisite for clang module debugging as discussed in
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-November/040076.html.
In order to refer to external types stored in split DWARF (dwo) objects,
such as clang modules, we need to emit skeleton CUs, which identify the
dwarf object (i.e., the clang module) by filename (the SplitDebugFilename)
and a hash value, the dwo_id.
This patch only contains the IR changes. The idea is that a CUs with a
non-zero dwo_id field will be emitted together with a DW_AT_GNU_dwo_name
and DW_AT_GNU_dwo_id attribute.
http://reviews.llvm.org/D9488
rdar://problem/20091852
llvm-svn: 237949
The value of this macro seems to be very low unless we actually start
using it everywhere, and I don't have immediate plans to make that
happen.
llvm-svn: 237941
The existing code for method StreamingMemoryObject.fetchToPos does not respect
the corresonding call to setKnownObjectSize(). As a result, it allows the
StreamingMemoryObject to read bytes past the object size.
This patch provides a test case, and code to fix the problem.
Patch by Karl Schimpf
Differential Revision: http://reviews.llvm.org/D8931
llvm-svn: 237939
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
Simplifying Triple::parseARMArch, leaving all the parsing to ARMTargetParser.
This commit also adds AArch64 detection to ARMTargetParser canonicalization,
and a two RedHat arch names (v{6,7}hl, meaning hard-float / little-endian).
Adding enough unit tests to cover the basics. Clang checks fine.
llvm-svn: 237902
Create a low-overhead path for `EmitLabelDifference()` that emits a
emits an absolute number when (1) the output is an object stream and (2)
the two symbols are in the same data fragment.
This drops memory usage on Mach-O from 975 MB down to 919 MB (5.8%).
The only call is when `!doesDwarfUseRelocationsAcrossSections()` --
i.e., on Mach-O -- since otherwise an absolute offset from the start of
the section needs a relocation. (`EmitLabelDifference()` is cheaper on
ELF anyway, since it creates 1 fewer temp symbol, and it gets called far
less often. It's not clear to me if this is even a bottleneck there.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237876
Finally remove the `MCSymbolData::Symbol` pointer. It was still being
used to track whether `MCSymbolData` had been initialized, but this is
better tracked by the bitfield in `MCSymbol`.
The only caller of `MCSymbolData::initialize()` was `MCAssembler`, which
(other than `Symbol`) passed in all-0 values. Replace all that
indirection with a default constructor.
The main point is a cleanup (and there's more cleanup to do), but there
are also some small memory savings. I measured ~989 MB down to ~975 MB,
cutting a little over 1% off the top of `llc`.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237873
Make the back-pointer from `MCSymbolData` to `MCSymbol` private,
preparing to remove the back pointer entirely. I've already updated all
the users, although for now it's still used to indicate whether
`MCSymbol::Data` has been initialized.
llvm-svn: 237868
Now that Intrinsic::ID is a typed enum, we can forward declare it and so return it from this method.
This updates all users which were either using an unsigned to store it, or had a now unnecessary cast.
llvm-svn: 237810
First ARMTargetParser FIXME, conservatively changing the way we parse CPUs
in the back-end. Still not perfect, with a lot of special cases, but moving
towards a more generic solution.
Moving all logic to the target parser made some unwritten assumptions
about architectures in Clang to break. I've added a lot of architectures
required by Clang, and default to CPUs that Clang believes it should
(and I agree).
I've also added a lot of unit tests, with the correct CPU for each
architecture, and Clang seems to be working correctly, too.
It also became clear that using "unsigned ID" as the argument for the get
methods makes it hard to know what ID, so I also changed the argument names
to match the enum type names.
llvm-svn: 237797
Summary:
For N32/N64, private labels begin with '.L' but for O32 they begin with '$'.
MCAsmInfo now has an initializer function which can be used to provide information from the TargetMachine to control the assembly syntax.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: jfb, sandeep, llvm-commits, rafael
Differential Revision: http://reviews.llvm.org/D9821
llvm-svn: 237789
This change implements support for lowering of the gc.relocates tied to the invoke statepoint.
This is acomplished by storing frame indices of the lowered values in "StatepointRelocatedValues" map inside FunctionLoweringInfo instead of storing them in per-basic block structure StatepointLowering.
After this change StatepointLowering is used only during "LowerStatepoint" call and it is not necessary to store it as a field in SelectionDAGBuilder anymore.
Differential Revision: http://reviews.llvm.org/D7798
llvm-svn: 237786
This change adds a new GC strategy for supporting the CoreCLR runtime.
This strategy is currently identical to Statepoint-example GC,
but is necessary for several upcoming changes specific to CoreCLR, such as:
1. Base-pointers not explicitly reported for interior pointers
2. Different format for stack-map encoding
3. Location of Safe-point polls: polls are only needed before loop-back edges and before tail-calls (not needed at function-entry)
4. Runtime specific handshake between calls to managed/unmanaged functions.
llvm-svn: 237753
DWARF standard claims that each compilation/type unit header in
.debug_info/.debug_types section must be followed by corresponding
compile/type unit DIE, possibly with its children. Two situations
are possible:
* compile/type unit DIE is missing because DWARF producer failed to
emit it.
* DWARF parser failed to parse unit DIE correctly, for instance if it
contains some unsupported attributes (see r237721, for instance).
In either of these cases, the library, and the tools that use it
(llvm-dwarfdump, llvm-symbolizer) should not crash. Insert appropriate
checks to protect against this.
llvm-svn: 237733
The incremental buildbots entered a pass-fail cycle where during the fail
cycle one of the tests from this commit fails for an unknown reason. I
have reverted this commit and will investigate the cause of this problem.
llvm-svn: 237730
A use for this will be added to Clang shortly. I haven't hit the
specific cases I want to cleanup in LLVM just yet.
A utility that avoids the need for this in direct calls to
llvm::Functions will be added too - since in that case the type can be
retrieved from the llvm::Function directly.
llvm-svn: 237728
This change implements basic support for DWARF alternate sections
proposal: http://www.dwarfstd.org/ShowIssue.php?issue=120604.1&type=open
LLVM tools now understand new forms: DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt, which are used as references to .debug_info and
.debug_str sections respectively, stored in a separate file, and
possibly shared between different executables / shared objects.
llvm-dwarfdump and llvm-symbolizer don't yet know how to access this
alternate debug file (usually pointed by .gnu_debugaltlink section),
but they can at lease properly parse and dump regular files, which
refer to it.
This change should fix crashes of llvm-dwarfdump and llvm-symbolizer on
files produced by running "dwz" tool. Such files are already installed
on some modern Linux distributions.
llvm-svn: 237721
Summary:
Introduce dereferenceable, dereferenceable_or_null metadata for loads
with the same semantic as corresponding attributes.
This patch depends on http://reviews.llvm.org/D9253
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9365
llvm-svn: 237720
Summary:
Also tagged a FIXME comment, and added information about why it breaks.
Bug found using AFL fuzz.
Reviewers: rafael, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9729
llvm-svn: 237709
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237708
This cleans up the FoldConstantArithmetic code by factoring out the case
of two ConstantSDNodes into an own function. This avoids unnecessary
complexity for many callers who already have ConstantSDNode arguments.
This also avoids an intermeidate SmallVector datastructure and a loop
over that datastructure.
llvm-svn: 237651
On 64-bit targets, Function has 4-bytes of padding in its struct layout.
This uses the space for the intrinsic ID. It is set and recalculated whenever the function name is set. This is similar to the current behavior which clears the function from the intrinsic ID cache when its renamed.
The intrinsic cache itself is removed as the only purpose was to speedup calls to getIntrinsicID() which now just reading the new field in the struct.
Reviewed by Duncan. http://reviews.llvm.org/D9836
llvm-svn: 237642
The common case is a direct call, so don't make all those users have to
explicitly pass the result of llvm::Function::getFunctionType.
llvm-svn: 237627
Summary:
Added isLoadableOrStorableType to PointerType.
We were doing some checks in some places, occasionally assert()ing instead
of telling the caller. With this patch, I'm putting all type checking in
the same place for load/store type instructions, and verifying the same
thing every time.
I also added a check for load/store of a function type.
Applied extracted check to Load, Store, and Cmpxcg.
I don't have exhaustive tests for all of these, but all Error() calls in
TypeCheckLoadStoreInst are being tested (in invalid.test).
Reviewers: dblaikie, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9785
llvm-svn: 237619
This was previously returning int. However there are no negative opcode
numbers and more importantly this was needlessly different from
MCInstrDesc::getOpcode() (which even is the value returned here) and
SDValue::getOpcode()/SDNode::getOpcode().
llvm-svn: 237611
Summary:
Allow hoisting of loads from values marked with dereferenceable_or_null
attribute. For values marked with the attribute perform
context-sensitive analysis to determine whether it's known-non-null or
not.
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9253
llvm-svn: 237593
Summary:
This allows other passes (such as SLSR) to compute the SCEV expression for an
imaginary GEP.
Test Plan: no regression
Reviewers: atrick, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9786
llvm-svn: 237589
At the present time, we don't have a way to represent general dependency
relationships, so everything is represented using memory dependency. In order
to preserve the data dependency of a READ_REGISTER on WRITE_REGISTER, we need
to model WRITE_REGISTER as writing (which we had been doing) and model
READ_REGISTER as reading (which we had not been doing). Fix this, and also the
way that the chain operands were generated at the SDAG level.
Patch by Nicholas Paul Johnson, thanks! Test case by me.
llvm-svn: 237584
When dependence analysis encounters a non-constant distance between
memory accesses it aborts the analysis and falls back to run-time checks
only. In this case we weren't resetting the array of dependences.
llvm-svn: 237574
instructions. These intrinsics are comming with rounding mode.
Added intrinsics for MAXSS/D, MINSS/D - with and without sae.
By Asaf Badouh (asaf.badouh@intel.com)
llvm-svn: 237560
DenseMap has great support for catching invalidated iterators now so we can get
rid of this crude hack. Use after frees are covered by asan.
llvm-svn: 237523
Summary:
But still handle them the same way since I don't know how they differ on
this target.
Of these, 'o' and 'v' are not tested but were already implemented.
I'm not sure why 'i' is required for X86 since it's supposed to be an
immediate constraint rather than a memory constraint. A test asserts
without it so I've included it for now.
No functional change intended.
Reviewers: nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8254
llvm-svn: 237517
This patch adds support for the following new instructions in the
Power ISA 2.07:
vpksdss
vpksdus
vpkudus
vpkudum
vupkhsw
vupklsw
These instructions are available through the vec_packs, vec_packsu,
vec_unpackh, and vec_unpackl built-in interfaces. These are
lane-sensitive instructions, so the built-ins have different
implementations for big- and little-endian, and the instructions must
be marked as killing the vector swap optimization for now.
The first three instructions perform saturating pack operations. The
fourth performs a modulo pack operation, which means it can be
represented with a vector shuffle, and conversely the appropriate
vector shuffles may cause this instruction to be generated. The other
instructions are only generated via built-in support for now.
Appropriate tests have been added.
There is a companion patch to clang for the rest of this support.
llvm-svn: 237499
Transition one API from `MCSymbolData` to `MCSymbol`. The function
needs both, and the backpointer from `MCSymbolData` to `MCSymbol` is
going away.
llvm-svn: 237498
Instead of storing a list of the `MCSymbolData` in use, store the
`MCSymbol`s. Churning in the direction of removing the back pointer
from `MCSymbolData`.
llvm-svn: 237496
Turn `MCSymbolData` into a field inside of `MCSymbol`. Keep all the old
API alive for now, so that consumers can be updated in a later commit.
This means we still temporarily need the back pointer from
`MCSymbolData` to `MCSymbol`, but I'll remove it in a follow-up.
This optimizes for object emission over assembly emission. By removing
the `DenseMap` in `MCAssembler`, llc memory usage drops from around 1040
MB to 1001 MB (3.8%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237490
Instead of an intrusive double-linked linked list, use a
`std::vector<>`. This saves a pointer per symbol and simplifies
`MCSymbolData`. Otherwise, no functionality change here.
While I measured a memory drop from around 1047MB to 1040MB (0.6%) --
and this is a decent cleanup in its own right -- it's primarily a
preparation patch for merging `MCSymbol` and `MCSymbolData`. I'll post
an updated patch for that to the list in a moment.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237487
Stop exposing the storage for `MCAssembler::Symbols`, and have
`MCAssembler` add symbols directly to its list instead of using a hook
in `MCSymbolData`. This opens up room for a follow-up commit to switch
from a linked list to a vector.
llvm-svn: 237486
MCInstrDesc.h includes things like MCInst.h which i can now remove after this. That will be a future commit.
Reviewed by Jim Grosbach.
llvm-svn: 237478
Summary:
This is a pass for speculative execution of instructions for simple if-then (triangle) control flow. It's aimed at GPUs, but could perhaps be used in other contexts. Enabling this pass gives us a 1.0% geomean improvement on Google benchmark suites, with one benchmark improving 33%.
Credit goes to Jingyue Wu for writing an earlier version of this pass.
Patched by Bjarke Roune.
Test Plan:
This patch adds a set of tests in test/Transforms/SpeculativeExecution/spec.ll
The pass is controlled by a flag which defaults to having the pass not run.
Reviewers: eliben, dberlin, meheff, jingyue, hfinkel
Reviewed By: jingyue, hfinkel
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9360
llvm-svn: 237459
This teaches the min/max idiom detector in ValueTracking to see through
casts such as SExt/ZExt/Trunc. SCEV can already do this, so we're bringing
non-SCEV analyses up to the same level.
The returned LHS/RHS will not match the type of the original SelectInst
any more, so a CastOp is returned too to inform the caller how to
convert to the SelectInst's type.
No in-tree users yet; this will be used by InstCombine in a followup.
llvm-svn: 237452
This adds new SDNodes for signed/unsigned min/max. These nodes are built from
select/icmp pairs matched at SDAGBuilder stage.
This patch adds the nodes, as well as legalization support and sets them to
be "expand" for all targets.
NFC for now; this will be tested when I switch AArch64 to using these new
nodes.
llvm-svn: 237423
Instead of doing that, create a temporary copy of MCTargetOptions and reset its
SanitizeAddress field based on the function's attribute every time an InlineAsm
instruction is emitted in AsmPrinter::EmitInlineAsm.
This is part of the work to remove TargetMachine::resetTargetOptions (the FIXME
added to TargetMachine.cpp in r236009 explains why this function has to be
removed).
Differential Revision: http://reviews.llvm.org/D9570
llvm-svn: 237412
Summary:
Extract method haveNoCommonBitsSet so that we don't have to duplicate this logic in
InstCombine and SeparateConstOffsetFromGEP.
This patch also makes SeparateConstOffsetFromGEP more precise by passing
DominatorTree to computeKnownBits.
Test Plan: value-tracking-domtree.ll that tests ValueTracking indeed leverages dominating conditions
Reviewers: broune, meheff, majnemer
Reviewed By: majnemer
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9734
llvm-svn: 237407
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
llvm-svn: 237404
Summary:
This implements the initial version as was proposed earlier this year
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-January/080462.html).
Since then Loop Access Analysis was split out from the Loop Vectorizer
and was made into a separate analysis pass. Loop Distribution becomes
the second user of this analysis.
The pass is off by default and can be enabled
with -enable-loop-distribution. There is currently no notion of
profitability; if there is a loop with dependence cycles, the pass will
try to split them off from other memory operations into a separate loop.
I decided to remove the control-dependence calculation from this first
version. This and the issues with the PDT are actively discussed so it
probably makes sense to treat it separately. Right now I just mark all
terminator instruction required which keeps identical CFGs for each
distributed loop. This seems to be working pretty well for 456.hmmer
where even though there is an empty if-then block in the distributed
loop initially, it gets completely removed.
The pass keeps DominatorTree and LoopInfo updated. I've tested this
with -loop-distribute-verify with the testsuite where we distribute ~90
loops. SimplifyLoop is violated in some cases and I have a FIXME
covering this.
Reviewers: hfinkel, nadav, aschwaighofer
Reviewed By: aschwaighofer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8831
llvm-svn: 237358
This commit implements the parsing of YAML block scalars.
Some code existed for it before, but it couldn't parse block
scalars.
This commit adds a new yaml node type to represent the block
scalar values.
This commit also deletes the 'spec-09-27' and 'spec-09-28' tests
as they are identical to the test file 'spec-09-26'.
This commit introduces 3 new utility functions to the YAML scanner
class: `skip_s_space`, `advanceWhile` and `consumeLineBreakIfPresent`.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9503
llvm-svn: 237314
ArrayRef already has a SFINAE constructor which can construct ArrayRef<const T*> from ArrayRef<T*>.
This adds methods to do the same directly from SmallVector and std::vector. This avoids an intermediate step through the use of makeArrayRef.
Also update the users of this in LICM and SROA to remove the now unnecessary makeArrayRef call.
Reviewed by David Blaikie.
llvm-svn: 237309
This version doesn't need begin/end but can instead just take a type which has begin/end methods.
Use this to replace an eligible foreach loop in LoopInfo found by David Blaikie in r237224.
Reviewed by David Blaikie.
llvm-svn: 237301
Summary:
This adds three Function methods to handle function entry counts:
setEntryCount() and getEntryCount().
Entry counts are stored under the MD_prof metadata node with the name
"function_entry_count". They are unsigned 64 bit values set by profilers
(instrumentation and sample profiler changes coming up).
Added documentation for new profile metadata and tests.
Reviewers: dexonsmith, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9628
llvm-svn: 237260
Several updates for [DebugInfo] Add debug locations to constant SD nodes (r235989).
Includes:
* re-enabling the change (disabled recently);
* missing change for FP constants;
* resetting debug location of constant node if it's used more than at one place
to prevent emission of wrong locations in case of coalesced constants;
* a couple of additional tests.
Now all look ups in CSEMap are wrapped by additional method.
Comment in D9084 suggests that debug locations aren't useful for "target constants",
so there might be one more change related to this API (namely, dropping debug
locations for getTarget*Constant methods).
Differential Revision: http://reviews.llvm.org/D9604
llvm-svn: 237237
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first two times this was committed (r229831, r233055), it caused several buildbot failures.
At least some of the ARM and MIPS ones were due to gcc/binutils issues, and should now be fixed.
llvm-svn: 237234
The array passed to LoadAndStorePromoter's constructor was a constant reference to a SmallVectorImpl, which is just the same as passing an ArrayRef.
Also, the data in the array can be 'const Instruction*' instead of 'Instruction*'. Its not possible to convert a SmallVectorImpl<T*> to SmallVectorImpl<const T*>, but ArrayRef does provide such a method.
Currently this added calls to makeArrayRef which should be a nop, but i'm going to kick off a discussion about improving ArrayRef to not need these.
llvm-svn: 237226
Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
The pass doesn't actually modify the module outside of the function being processed. The only confusing piece is that it both inserts calls and then inlines the resulting calls. Given that, it definitely invalidates module level analysis results, but many FunctionPasses do that.
Differential Revision: http://reviews.llvm.org/D9590
llvm-svn: 237185
sys/time.h on Solaris (and possibly other systems) defines "SEC" as "1"
using a cpp macro. The result is that this fails to compile.
Fixes https://llvm.org/PR23482
llvm-svn: 237112
to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
llvm-svn: 237079
The TargetRegistry is just a namespace-like class, instantiated in one
place to use a range-based for loop. Instead, expose access to the
registry via a range-based 'targets()' function instead. This makes most
uses a bit awkward/more verbose - but eventually we should just add a
range-based find_if function which will streamline these functions. I'm
happy to mkae them a bit awkward in the interim as encouragement to
improve the algorithms in time.
llvm-svn: 237059
This is a less ambitious version of:
http://reviews.llvm.org/rL236546
because that was reverted in:
http://reviews.llvm.org/rL236600
because it caused memory corruption that wasn't related to FMF
but was actually due to making nodes with 2 operands derive from a
plain SDNode rather than a BinarySDNode.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
llvm-svn: 237046
The code that builds the dependence graph assumes that two PseudoSourceValues
don't alias. In a tail calling function two FixedStackObjects might refer to the
same location. Worse 'immutable' fixed stack objects like function arguments are
not immutable and will be clobbered.
Change this so that a load from a FixedStackObject is not invariant in a tail
calling function and don't return a PseudoSourceValue for an instruction in tail
calling functions when building the dependence graph so that we handle function
arguments conservatively.
Fix for PR23459.
rdar://20740035
llvm-svn: 236916
This new class in a global context contain arch-specific knowledge in order
to provide LLVM libraries, tools and projects with the ability to understand
the architectures. For now, only FPU, ARCH and ARCH extensions on ARM are
supported.
Current behaviour it to parse from free-text to enum values and back, so that
all users can share the same parser and codes. This simplifies a lot both the
ASM/Obj streamers in the back-end (where this came from), and the front-end
parsers for command line arguments (where this is going to be used next).
The previous implementation, using .def/.h includes is deprecated due to its
inflexibility to be built without the backend support and for being too
cumbersome. As more architectures join this scheme, and as more features of
such architectures are added (such as hardware features, type sizes, etc) into
a full blown TargetDescription class, having a set of classes is the most
sane implementation.
The ultimate goal of this refactor both LLVM's and Clang's target description
classes into one unique interface, so that we can de-duplicate and standardise
the descriptions, as well as make it available for other front-ends, tools,
etc.
The FPU parsing for command line options in Clang has been converted to use
this new library and a number of aliases were added for compatibility:
* A bogus neon-vfpv3 alias (neon defaults to vfp3)
* armv5/v6
* {fp4/fp5}-{sp/dp}-d16
Next steps:
* Port Clang's ARCH/EXT parsing to use this library.
* Create a TableGen back-end to generate this information.
* Run this TableGen process regardless of which back-ends are built.
* Expose more information and rename it to TargetDescription.
* Continue re-factoring Clang to use as much of it as possible.
llvm-svn: 236900
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
llvm-svn: 236888
Summary:
I noticed this bug when deubging a WIP on LSR. I wonder whether and how we
should add a regression test for this.
Test Plan: no tests failed.
Reviewers: atrick
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D9536
llvm-svn: 236887
This commit enables the tests located in test/YAMLParser directory.
Those tests were never actually enabled, as llvm-lit didn't pick up the
files with the 'data' extension. The commit renames those test files to files
with the 'test' extension so that llvm-lit would find them.
This commit also modifies yaml-bench so that it returns an error status
if an error occurred during parsing. It also adds the '-use-color'
command line option to yaml-bench (to make sure that file check matches
the error messages in the output stream).
This commit modifies some of the renamed tests so that they wouldn't
fail. It gets rid of XFAILs and uses the 'not' command instead for
some of the tests that have to fail during parsing. This commit
also adds some 'FIXME' comments to a couple of tests that are
supposed to fail but currently pass because of various bugs
in the implementation of the yaml parser.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9448
llvm-svn: 236754
http://reviews.llvm.org/D9517
The separate header file allows to reuse the MIPS ABI flags structure
constants in other LLVM tools like the llvm-readobj.
No functional changes.
llvm-svn: 236732
Added intrinsics for the instructions. CC parameter of the intrinsics was changed from i8 to i32 according to the spec.
By Igor Breger (igor.breger@intel.com)
llvm-svn: 236714
Summary:
This gives frontend more precise control over collected coverage
information. User can still override these options by passing
-mllvm flags.
No functionality change.
Test Plan: regression test suite.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9539
llvm-svn: 236687
Created an abstraction for log2, llvm::Log2 in Support/MathExtras.h
Hid Android problems inside of it
Differential Revision: http://reviews.llvm.org/D9467
llvm-svn: 236680
options.
This commit fixes a bug in llc and opt where "-mcpu" and "-mattr" wouldn't
override function attributes "-target-cpu" and "-target-features" in the IR.
Differential Revision: http://reviews.llvm.org/D9537
llvm-svn: 236677
Renames the original CreateGCStatepoint to CreateGCStatepointCall, and
moves invoke creating functionality from PlaceSafepoints.cpp to
IRBuilder.cpp.
This changes the labels generated for PlaceSafepoints/invokes.ll so use
a regex there to make the basic block labels more resilient.
llvm-svn: 236672
This commit changes the 'skip' method in the 'KeyValueNode' class
to ensure that it doesn't dereference a null pointer when calling
the 'skip' method of its value child node. It also adds a unittest
that ensures that the crash doesn't occur.
This change is motivated by a patch that implements parsing
of YAML block scalars (http://reviews.llvm.org/D9503), as one
of the unittests in that patch triggered this problem.
llvm-svn: 236669
This makes use of the new API which can remove attributes from a set given a builder.
This is much faster than creating a temporary set and reduces llc time by about 0.3% which was all spent creating temporary attributes sets on the context.
llvm-svn: 236668
Prior to this change we would have to construct a temporary AttributeSet (which isn't temporary at all given that its allocated on the context), just to contain the attributes in the builder, then call remove on that.
Now we can just remove any attributes from the (lightweight and really temporary) builder itself.
Will be used in a future commit to remove some temporary attributes sets.
llvm-svn: 236666
Since the coverage mapping reader and the instrprof reader were
emitting a shared set of error codes, the error messages you'd get
back from llvm-cov were ambiguous about what was actually wrong. Add
another error category to fix this.
I've also improved the wording on a couple of the instrprof errors,
for consistency.
llvm-svn: 236665
Specifically, this patch correctly respects the -demangle option,
and additionally adds a hidden --relative-address option allows
input addresses to be relative to the module load address instead
of absolute addresses into the image.
llvm-svn: 236653
Don't create names for temporary symbols when using an object streamer.
The names never make it to the output anyway. From the starting point
of r236629, my heap profile says this drops peak memory usage from 1100
MB to 1058 MB for CodeGen of `verify-uselistorder`, a savings of almost
4% on peak memory, and removes `StringMap<bool, BumpPtrAllocator...>`
from the profile entirely.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 236642
Summary:
This helper function creates a ctor function, which calls sanitizer's
init function with given arguments. This constructor is then expected
to be added to module's ctors. The patch helps unifying how sanitizer
constructor functions are created, and how init functions are called
across all sanitizers.
Reviewers: kcc, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8777
llvm-svn: 236627
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
llvm-svn: 236613
For accessors in the `Statepoint` class, use symbolic constants for
offsets into the argument vector instead of literals. This makes the
code intent clearer and simpler to change.
llvm-svn: 236566
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
There are 2 structural changes here:
1. The main diff is that we're preparing to extend the optimization
flags to affect more than just binary SDNodes. Eg, IR intrinsics
( https://llvm.org/bugs/show_bug.cgi?id=21290 ) or non-binop nodes
that don't even exist in IR such as FMA, FNEG, etc.
2. The other change is that we're actually copying the FP fast-math-flags
from the IR instructions to SDNodes.
Differential Revision: http://reviews.llvm.org/D8900
llvm-svn: 236546
Note, this is a reapplication of r236515 with a fix to not assert on non-register operands, but instead only handle them until the subsequent commit. Original commit message follows.
The code was basically the same here already. Just added an out parameter for a vector of seen defs so that UpdatePredRedefs can call StepForward first, then do its own post processing on the seen defs.
Will be used in the next commit to also handle regmasks.
llvm-svn: 236538
This adds intrinsics to allow access to all of the z13 vector instructions.
Note that instructions whose semantics can be described by standard LLVM IR
do not get any intrinsics.
For each instructions whose semantics *cannot* (fully) be described, we
define an LLVM IR target-specific intrinsic that directly maps to this
instruction.
For instructions that also set the condition code, the LLVM IR intrinsic
returns the post-instruction CC value as a second result. Instruction
selection will attempt to detect code that compares that CC value against
constants and use the condition code directly instead.
Based on a patch by Richard Sandiford.
llvm-svn: 236527
The code was basically the same here already. Just added an out parameter for a vector of seen defs so that UpdatePredRedefs can call StepForward first, then do its own post processing on the seen defs.
Will be used in the next commit to also handle regmasks.
llvm-svn: 236514
This reverts commit r236360.
This change exposed a bug in WinEHPrepare by opting win32 code into EH
preparation. We already knew that WinEHPrepare has bugs, and is the
status quo for x64, so I don't think that's a reason to hold off on this
change. I disabled exceptions in the sanitizer tests in r236505 and an
earlier revision.
llvm-svn: 236508
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
llvm-svn: 236507
and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
llvm-svn: 236465
This patch adds an optional 'flow' field to the MappingTrait
class so that yaml IO will be able to output flow mappings.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9450
llvm-svn: 236456
This patch adds the --load-address command line option to
llvm-pdbdump, which dumps all addresses assuming the module has
loaded at the specified address.
Additionally, this patch adds an option to llvm-pdbdump to support
dumping of public symbols (i.e. symbols with external linkage).
llvm-svn: 236342
This pass is responsible for constructing the EH registration object
that gets linked into fs:00, which is all it does in this change. In the
future, it will also insert stores to update the EH state number.
I considered keeping this functionality in WinEHPrepare, but it's pretty
separable and X86 specific. It has conceptually very little to do with
the task of WinEHPrepare, which is currently outlining. WinEHPrepare is
also in theory useful on ARM, but this logic is pretty x86 specific.
Reviewers: andrew.w.kaylor, majnemer
Differential Revision: http://reviews.llvm.org/D9422
llvm-svn: 236339
Patch from dexonsmith. The call to toInt() was calling compareTo() which
in some cases would call back to toInt(), creating an infinite loop.
Fixed by simplifying the logic in compareTo() to avoid the co-recursion.
llvm-svn: 236326
Found by -Wpessimizing-move, no functional change. The APFloat and
PassManager change doesn't affect codegen as returning a by-value
argument will always result in a move.
llvm-svn: 236316
This change is the second of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the llvm instrumenter, specifically
a new member of GCOVOptions for clang to save the specified filename, and
support for calling the new compiler-rt interface from __llvm_profile_init.
Patch by Teresa Johnson. Thanks!
llvm-svn: 236288
Iteration over all permutations didn't really work,
due to evolution of the underlying enums.
Differential Revision: http://reviews.llvm.org/D9057
llvm-svn: 236251
Summary:
The private constructor for ScaledNumber was using uint64_t instead of
DigitsT. This was preventing instantiations of ScaledNumber with
anything other than uint64_t types.
In implementing the tests, I ran into another issue. Operators >>= and
<<= did not have variants for accepting other ScaledNumber as the shift
argument. This is expected by the SCALED_NUMBER_BOP.
It makes no sense to allow shifting a ScaledNumber by another
ScaledNumber, so the patch includes two new templates for shifting
ScaledNumbers.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9350
llvm-svn: 236232
Summary:
This pathc add convenient overloads for CreateInsertElement and CreateExtractElement methods in IRBuilder
where vector index can be uint64_t instead of Value*.
Test Plan: Unit test included.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9347
llvm-svn: 236214
Many of the callers already have the pointer type anyway, and for the
couple of callers that don't it's pretty easy to call PointerType::get
on the pointee type and address space.
This avoids LLParser from using PointerType::getElementType when parsing
GlobalAliases from IR.
llvm-svn: 236160
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
This is a preliminary step to using the IR-level floating-point fast-math-flags in the SDAG (D8900).
In this patch, we introduce the optimization flags as their own struct. As noted in the TODO comment,
we should eventually share this data between the IR passes and the backend.
We also switch the existing nsw / nuw / exact bit functionality of the BinaryWithFlagsSDNode class to
use the new struct.
The tradeoff is that instead of using the free but limited space of SDNode's SubclassData, we add a
data member to the subclass. This means we don't have to repeat all of the get/set methods per flag,
but we're potentially adding size to all nodes of this subclassi type.
In practice on 64-bit systems (measured on Linux and MacOS X), there is no size difference between an
SDNode and BinaryWithFlagsSDNode after this change: they're both 80 bytes. This means that we had at
least one free byte to play with due to struct alignment.
Differential Revision: http://reviews.llvm.org/D9325
llvm-svn: 235997
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
As a space optimization, this instruction would just encode the pointer
type of the first operand and use the knowledge that the second and
third operands would be of the pointee type of the first. When typed
pointers go away, this assumption will no longer be available - so
encode the type of the second operand explicitly and rely on that for
the third.
Test case added to demonstrate the backwards compatibility concern,
which only comes up when the definition of the second operand comes
after the use (hence the weird basic block sequence) - at which point
the type needs to be explicitly encoded in the bitcode and the record
length changes to accommodate this.
llvm-svn: 235966
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
llvm-svn: 235951
Reverse libLTO's default behaviour for preserving use-list order in
bitcode, and add API for controlling it. The default setting is now
`false` (don't preserve them), which is consistent with `clang`'s
default behaviour.
Users of libLTO should call `lto_codegen_should_embed_uselists(CG,true)`
prior to calling `lto_codegen_write_merged_modules()` whenever the
output file isn't part of the production workflow in order to reproduce
results with subsequent calls to `llc`.
(I haven't added tests since `llvm-lto` (the test tool for LTO) doesn't
support bitcode output, and even if it did: there isn't actually a good
way to test whether a tool has passed the flag. If the order is already
"natural" (if the order will already round-trip) then no use-list
directives are emitted at all. At some point I'll circle back to add
tests to `llvm-as` (etc.) that they actually respect the flag, at which
point I can somehow add a test here as well.)
llvm-svn: 235943
These look like copy/paste errors, and shouldn't have the "prior to"
qualifier. Each API was introduced at the given values of
`LTO_API_VERSION`. The "prior to" in other doxygen comments is because
I couldn't easily differentiate between versions 1 and 2 when I added
these comments.
llvm-svn: 235925
Add IR support for `Metadata` attachments. Assembly and bitcode support
will follow shortly, but for now we just have unit tests. This is part
of PR23340.
llvm-svn: 235783
Make room for more than just `Function::isMaterializable()` in the
`GlobalObject` subclass data bitfield. Since we're treating it like a
bitfield, change `Function::Function()` to zero-out the whole thing.
llvm-svn: 235770
This introduces an intrinsic called llvm.eh.exceptioncode. It is lowered
by copying the EAX value live into whatever basic block it is called
from. Obviously, this only works if you insert it late during codegen,
because otherwise mid-level passes might reschedule it.
llvm-svn: 235768
This should make it clear under which narrow circumstances implicit
physreg uses are okay when rematerializing and prevent people from
accidentally allowing too much when overriding
isReallyTriviallyReMaterializable() even with the weaker assert in the
RegisterCoalescer.
llvm-svn: 235679
Currently symbol names are printed in quotes if it contains something
outside of the arbitrary set of characters that isAcceptableChar tests
for. On somem targets, it is never OK to print a symbol name in quotes
so allow targets to opt out of this behavior.
llvm-svn: 235670
Add assembler/disassembler support for dcbt/dcbtst (and aliases) with the hint
field specified (non-zero). Unforunately, the syntax for this instruction is
special in that it differs for server vs. embedded cores:
dcbt ra, rb, th [server]
dcbt th, ra, rb [embedded]
where th can be omitted when it is 0. dcbtst is the same. Thus we need to play
games in the parser and the printer to flip the operands around on the embedded
cores. We'll use the server syntax as the default (binutils currently uses the
embedded form by default, but IBM is changing that).
We also stop marking dcbtst as having unmodeled side effects (this is not
necessary, it is just a hint like dcbt -- noticed by inspection, so no separate
test case).
llvm-svn: 235657
(reverted in r235533)
Original commit message:
"Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)"
The remapping done in ValueMapper for LTO was insufficient as the types
weren't correctly mapped (though I was using the post-mapped operands,
some of those operands might not have been mapped yet so the type
wouldn't be post-mapped yet). Instead use the pre-mapped type and
explicitly map all the types.
llvm-svn: 235651
Specifically, if a pointer accesses different underlying objects in each
iteration, don't look through the phi node defining the pointer.
The motivating case is the underlyling-objects-2.ll testcase. Consider
the loop nest:
int **A;
for (i)
for (j)
A[i][j] = A[i-1][j] * B[j]
This loop is transformed by Load-PRE to stash away A[i] for the next
iteration of the outer loop:
Curr = A[0]; // Prev_0
for (i: 1..N) {
Prev = Curr; // Prev = PHI (Prev_0, Curr)
Curr = A[i];
for (j: 0..N)
Curr[j] = Prev[j] * B[j]
}
Since A[i] and A[i-1] are likely to be independent pointers,
getUnderlyingObjects should not assume that Curr and Prev share the same
underlying object in the inner loop.
If it did we would try to dependence-analyze Curr and Prev and the
analysis of the corresponding SCEVs would fail with non-constant
distance.
To fix this, the getUnderlyingObjects API is extended with an optional
LoopInfo parameter. This is effectively what controls whether we want
the above behavior or the original. Currently, I only changed to use
this approach for LoopAccessAnalysis.
The other testcase is to guard the opposite case where we do want to
look through the loop PHI. If we step through an array by incrementing
a pointer, the underlying object is the incoming value of the phi as the
loop is entered.
Fixes rdar://problem/19566729
llvm-svn: 235634
This will enable us to create a PDBContext so as to expose some
amount of debug info functionality through a common interace.
Differential Revision: http://reviews.llvm.org/D9205
Reviewed by: Alexey Samsonov
llvm-svn: 235612
Move isDereferenceablePointer function to Analysis. This function recursively tracks dereferencability over a chain of values like other functions in ValueTracking.
This refactoring is motivated by further changes to support dereferenceable_or_null attribute (http://reviews.llvm.org/D8650). isDereferenceablePointer will be extended to perform context-sensitive analysis and IR is not a good place to have such functionality.
Patch by: Artur Pilipenko <apilipenko@azulsystems.com>
Differential Revision: reviews.llvm.org/D9075
llvm-svn: 235611
Summary:
Make sure the abbrev operands are valid and that we can read/skip them
afterwards.
Bug found with AFL fuzz.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9030
llvm-svn: 235595
This removes the -sehprepare flag and makes __C_specific_handler
functions always to use WinEHPrepare.
This was tested by building all of chromium_builder_tests and running a
few tests that use SEH, but if something breaks, we can revert this.
llvm-svn: 235557
I added the poisoning back in r76891 (2009) because of some bugs in
Unladen Swallow, and then Evan Cheng added the setRangeWritable() call
in r81308. Profiling a Release+Asserts build on Windows shows that this
memory protection call is actually very expensive. 4 seconds of a 70
second Clang compilation are spent in VirtualQuery. These days we have
more reliable tools like ASan to find these kinds of bugs, so we can go
ahead and retire these checks.
llvm-svn: 235542
This reverts commit r235458.
It looks like this might be breaking something LTO-ish. Looking into it
& will recommit with a fix/test case/etc once I've got more to go on.
llvm-svn: 235533
This causes OpKind and all the bitfields after it to use 32-bit load/stores instead of i24's for the existing bitfields.
Bugs will be filed to track whether clang and llvm could have generated the 32-bit operations in the front-end or optimizer.
Reviewed by Rafael.
llvm-svn: 235528
X86 backend.
The code generated for symbolic targets is identical to the code generated for
constant targets, except that a relocation is emitted to fix up the actual
target address at link-time. This allows IR and object files containing
patchpoints to be cached across JIT-invocations where the target address may
change.
llvm-svn: 235483
Without pointee types the space optimization of storing only the pointer
type and not the value type won't be viable - so add the extra type
information that would be missing.
llvm-svn: 235475
Without pointee types the space optimization of storing only the pointer
type and not the value type won't be viable - so add the extra type
information that would be missing.
Storeatomic coming soon.
llvm-svn: 235474
Add a flag to lib/Linker (and `llvm-link`) to override linkage rules.
When set, the functions in the source module *always* replace those in
the destination module.
The `llvm-link` option is `-override=abc.ll`. All the "regular" modules
are loaded and linked first, followed by the `-override` modules. This
is useful for debugging workflows where some subset of the module (e.g.,
a single function) is extracted into a separate file where it's
optimized differently, before being merged back in.
Patch by Luqman Aden!
llvm-svn: 235473
Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)
llvm-svn: 235458
Summary:
This lets us use range based for loops.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9169
llvm-svn: 235416
Remove the `DIArray` and `DITypeArray` typedefs, preferring the
underlying types (`DebugNodeArray` and `MDTypeRefArray`, respectively).
llvm-svn: 235413
Summary:
MemorySSA uses this algorithm as well, and this enables us to reuse the code in both places.
There are no actual algorithm or datastructure changes in here, just code movement.
Reviewers: qcolombet, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9118
llvm-svn: 235406
Keep the old SEH fan-in lowering on by default for now, since projects
rely on it. This will make it easy to test this change with a simple
flag flip.
llvm-svn: 235399
Summary:
This directive is exactly the same as .asciz, except it's only used by MIPS.
It is used to store null terminated strings in object files.
Reviewers: rafael, dsanders, echristo
Reviewed By: dsanders, echristo
Subscribers: echristo, llvm-commits
Differential Revision: http://reviews.llvm.org/D7530
llvm-svn: 235382
Delete subclasses of (the already deleted) `DIType` in favour of
directly using pointers from the `Metadata` hierarchy.
While `DICompositeType` wraps `MDCompositeTypeBase` and `DIDerivedType`
wraps `MDDerivedTypeBase`, most uses of each really meant the more
specific `MDCompositeType` and `MDDerivedType`.
llvm-svn: 235351
This is the last major parent class, so I'll probably start deleting
classes in batches now. Looks like many of the references to the DI*
hierarchy were updated organically along the way.
llvm-svn: 235331
Replace uses of `DIScope` with `MDScope*`. There was one spot where
I've left an `MDScope*` uninitialized (where `DIScope` would have been
default-initialized to `nullptr`) -- this is intentional, since the
if/else that follows should unconditional assign it to a value.
llvm-svn: 235327
The current implementations could exhibit some behavior differences:
raw_fd_ostream: Whatever the underlying fd does with seek+write. In a normal
file, the write position would be back to the old offset.
raw_svector_ostream: The write position is always the end of the stream, so
after pwrite the write position would be the new end. This matches what OS_X
(all BSD?) do with a pwrite in a O_APPEND fd.
Given that we don't need that feature and don't use O_APPEND a lot in LLVM,
just disallow it.
I am open to suggestions on renaming pwrite to something else, but this fixes
the issue for now.
Thanks to Yaron Keren for reporting it.
llvm-svn: 235303
This patch refactors reduction identification code out of LoopVectorizer and
exposes them as common utilities.
No functional change.
Review: http://reviews.llvm.org/D9046
llvm-svn: 235284
Craig Topper