Make the virtual method Toolchain::GetDefaultStackProtectorLevel()
return an explict enum value rather than an integral constant. This
makes the code subjectively easier to read, and should help prevent bugs
that may (or may never) arise from changing the enum values. Previously,
these were just kept in sync via a comment, which is brittle. The trade
off is including a additional header in a few new places. It is not
necessary, but in my opinion helps the readability.
Split off from https://reviews.llvm.org/D90194 to help cut down on lines
changed in code review.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D90271
Since Wasm comdat sections work similarly to ELF, we can use that mechanism
to eliminate duplicate dwarf type information in the same way.
Differential Revision: https://reviews.llvm.org/D88603
1. Emit error for -G driver option on AIX
2. Adjust cmake file to use -Wl,-G instead of -G
On AIX, legacy XL compiler uses -G to produce a shared object enabled
for use with the run-time linker, which has different meanings from what
it is used for in Clang. And in Clang, other targets do not have -G map
to another functionality in their legacy compiler. So this error is more
important when we are on AIX.
Differential Revision: https://reviews.llvm.org/D89897
With -fbasicblock-sections=, let the front-end handle the case where the file
doesnt exist. The driver only checks if the option syntax is right.
Differential Revision: https://reviews.llvm.org/D89500
* Make cc1 and cc1as --compress-debug-sections an alias for --compress-debug-sections=zlib
* Make -gz an alias for -gz=zlib
The new behavior is consistent with GCC when binutils>=2.26 is detected:
-gz is translated to --compress-debug-sections=zlib instead of --compress-debug-sections.
- The goal of this patch is improve option compatible with RISCV-V GCC,
-mcpu support on GCC side will sent patch in next few days.
- -mtune only affect the pipeline model and non-arch/extension related
target feature, e.g. instruction fusion; in td file it called
TuneFeatures, which is introduced by X86 back-end[1].
- -mtune accept all valid option for -mcpu and extra alias processor
option, e.g. `generic`, `rocket` and `sifive-7-series`, the purpose is
option compatible with RISCV-V GCC.
- Processor alias for -mtune will resolve according the current target arch,
rv32 or rv64, e.g. `rocket` will resolve to `rocket-rv32` or `rocket-rv64`.
- Interaction between -mcpu and -mtune:
* -mtune has higher priority than -mcpu for pipeline model and
TuneFeatures.
[1] https://reviews.llvm.org/D85165
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D89025
This reverts commits 683b308c07 and
8487bfd4e9.
We will go for a more restricted approach that does not give freedom to
everyone to change ABIs on whichever platform.
See the discussion on https://reviews.llvm.org/D85802.
This implements the flag proposed in RFC http://lists.llvm.org/pipermail/cfe-dev/2020-August/066437.html.
The goal is to add a way to override the default target C++ ABI through
a compiler flag. This makes it easier to test and transition between different
C++ ABIs through compile flags rather than build flags.
In this patch:
- Store `-fc++-abi=` in a LangOpt. This isn't stored in a
CodeGenOpt because there are instances outside of codegen where Clang
needs to know what the ABI is (particularly through
ASTContext::createCXXABI), and we should be able to override the
target default if the flag is provided at that point.
- Expose the existing ABIs in TargetCXXABI as values that can be passed
through this flag.
- Create a .def file for these ABIs to make it easier to check flag
values.
- Add an error for diagnosing bad ABI flag values.
Differential Revision: https://reviews.llvm.org/D85802
Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
SUMMARY:
In IBM compiler xlclang , there is an option -fnovisibility which suppresses visibility. For more details see: https://www.ibm.com/support/knowledgecenter/SSGH3R_16.1.0/com.ibm.xlcpp161.aix.doc/compiler_ref/opt_visibility.html.
We need to add the option -mignore-xcoff-visibility for compatibility with the IBM AIX OS (as the option is enabled by default in AIX). With this option llvm does not emit any visibility attribute to ASM or XCOFF object file.
The option only work on the AIX OS, for other non-AIX OS using the option will report an unsupported options error.
In AIX OS:
1.1 the option -mignore-xcoff-visibility is enabled by default , if there is not -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command .
1.2 if there is -fvisibility=* explicitly but not -mignore-xcoff-visibility explicitly in the clang command. it will generate visibility attributes.
1.3 if there are both -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command. The option "-mignore-xcoff-visibility" wins , it do not emit the visibility attribute.
The option -mignore-xcoff-visibility has no effect on visibility attribute when compile with -emit-llvm option to generated LLVM IR.
Reviewer: daltenty,Jason Liu
Differential Revision: https://reviews.llvm.org/D87451
Object of class `Command` contains various properties of a command to
execute, but output file was missed from them. This change adds this
property. It is required for reporting consumed time and memory implemented
in D78903 and may be used in other cases too.
Differential Revision: https://reviews.llvm.org/D78902
A lot of our code building with clang-cl.exe using Clang 11 was failing with
the following 2 type of errors:
1. explicit specialization of 'foo' after instantiation
2. no matching function for call to 'bar'
Note that we also use -fdelayed-template-parsing in our builds.
I tried pretty hard to get a small repro for these failures, but couldn't. So
there is some subtle edge case in the -fpch-instantiate-templates feature
introduced by this change: https://reviews.llvm.org/D69585
When I tried turning this off using -fno-pch-instantiate-templates, builds
would silently fail with the same error without any indication that
-fno-pch-instantiate-templates was being ignored by the compiler. Then I
realized this "no" option wasn't actually working when I ran Clang under a
debugger.
Differential revision: https://reviews.llvm.org/D88680
GCC 7 introduced -fprofile-update={atomic,prefer-atomic} (prefer-atomic is for
best efforts (some targets do not support atomics)) to increment counters
atomically, which is exactly what we have done with -fprofile-instr-generate
(D50867) and -fprofile-arcs (b5ef137c11).
This patch adds the option to clang to surface the internal options at driver level.
GCC 7 also turned on -fprofile-update=prefer-atomic when -pthread is specified,
but it has performance regression
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89307). So we don't follow suit.
Differential Revision: https://reviews.llvm.org/D87737
recommit e50465ecef with fix for
regression in lldb tests.
Two issues:
1. the directory part of original .dwo file was dropped
2. if the stem of the .dwo file contains '.', the last dot
and strings after that were removed
This recommit fixes those two issues.
Set the default wchar_t type on z/OS, and unsigned as the default.
Reviewed By: hubert.reinterpretcast, fanbo-meng
Differential Revision: https://reviews.llvm.org/D87624
when -gsplit option is used with clang driver, clang driver will create
a filename with .dwo option based on the input file name and pass
it to clang -cc1. This file is used for storing the debug info. Since
HIP generate separate object files for different GPU arch's,
this file should be different for different GPU arch. This patch
adds _ and GPU arch to the stem of the dwo file.
Differential Revision: https://reviews.llvm.org/D87791
Enforcing a profile available check in the driver does not work with
incremental LTO builds where the LTO backend invocation does not include
the profile flags. At this point the profiles have already been consumed
and the IR contains profile metadata. Instead we always pass through the
-fsplit-machine-functions flag on user request. The pass itself contains
a check to return early if no profile information is available.
Differential Revision: https://reviews.llvm.org/D87943
Initial support for dwarf fission sections (-gsplit-dwarf) on wasm.
The most interesting change is support for writing 2 files (.o and .dwo) in the
wasm object writer. My approach moves object-writing logic into its own function
and calls it twice, swapping out the endian::Writer (W) in between calls.
It also splits the import-preparation step into its own function (and skips it when writing a dwo).
Differential Revision: https://reviews.llvm.org/D85685
Writing the .note.gnu.property manually is error prone and hard to
maintain in the assembly files.
The -mmark-bti-property is for the assembler to emit the section with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI. To be used when C/C++ is compiled
with -mbranch-protection=bti.
This patch refactors the .note.gnu.property handling.
Reviewed By: chill, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D81930
Reland with test dependency on aarch64 target.
Writing the .note.gnu.property manually is error prone and hard to
maintain in the assembly files.
The -mmark-bti-property is for the assembler to emit the section with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI. To be used when C/C++ is compiled
with -mbranch-protection=bti.
This patch refactors the .note.gnu.property handling.
Reviewed By: chill, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D81930
This patch adds a command line flag for the machine function splitter
(added in rG94faadaca4e1).
-fsplit-machine-functions
Split machine functions using profile information (x86 ELF). On
other targets an error is emitted. If profile information is not
provided a warning is emitted notifying the user that profile
information is required.
Differential Revision: https://reviews.llvm.org/D87047
Basic block sections is untested on other platforms and binary formats apart
from x86,elf. This patch emits a warning and drops the flag if the platform
and binary format are not compatible. Add a test to ensure that
specifying an incompatible target in the driver does not enable the
feature.
Differential Revision: https://reviews.llvm.org/D87426
This effectively disables r340386 on Darwin, and provides a command line flag
to opt into/out of this behaviour. This change is needed to compile certain
Apple headers correctly.
rdar://47688592
Differential revision: https://reviews.llvm.org/D86881
For the PS4, do not emit "-tune-cpu generic" since the platform only has 1 known CPU and we do not want to prevent optimizations by tuning for a generic rather than the specific processor it contains.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D86965
See RFC for background:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142744.html
Note that the runtime changes will be sent separately (hopefully this
week, need to add some tests).
This patch includes the LLVM pass to instrument memory accesses with
either inline sequences to increment the access count in the shadow
location, or alternatively to call into the runtime. It also changes
calls to memset/memcpy/memmove to the equivalent runtime version.
The pass is modeled on the address sanitizer pass.
The clang changes add the driver option to invoke the new pass, and to
link with the upcoming heap profiling runtime libraries.
Currently there is no attempt to optimize the instrumentation, e.g. to
aggregate updates to the same memory allocation. That will be
implemented as follow on work.
Differential Revision: https://reviews.llvm.org/D85948
This patch defaults to -mtune=generic unless -march is present. If -march is present we'll use the empty string unless its overridden by mtune. The back should use the target cpu if the tune-cpu isn't present.
It also adds AST serialization support to fix some tests that emit AST and parse it back. These tests diff the IR against the output from not going through AST. So if we don't serialize the tune CPU we fail the diff.
Differential Revision: https://reviews.llvm.org/D86488
Some code bases out there pass -mtune=generic to clang. This would have
been ignored prior to D85384. Now it results in an error
because "generic" isn't recognized by isValidCPUName.
And if we let it go through to the backend as a tune
setting it would get the tune flags closer to i386 rather
than a modern CPU.
I plan to change what tune=generic does in the backend in
a future patch. And allow this in the frontend.
But this should be a quick fix for the error some users
are seeing.
Building on the backend support from D85165. This parses the command line option in the driver, passes it on to CC1 and adds a function attribute.
-Still need to support tune on the target attribute.
-Need to use "generic" as the tuning by default. But need to change generic in the backend first.
-Need to set tune if march is specified and mtune isn't.
-May need to disable getHostCPUName's ability to guess CPU name from features when it doesn't have a family/model match for mtune=native. That's what gcc appears to do.
Differential Revision: https://reviews.llvm.org/D85384
Fixes pr/11710.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Resubmit after breaking Windows and OSX builds.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D80242
Using -fmodules-* options for PCHs is a bit confusing, so add -fpch-*
variants. Having extra options also makes it simple to do a configure
check for the feature.
Also document the options in the release notes.
Differential Revision: https://reviews.llvm.org/D83623
No real action is taken for a value of scalable but it provides a
route to disable an earlier specification and is effectively its
default value when omitted.
Patch also removes an "unused variable" warning.
Differential Revision: https://reviews.llvm.org/D84021
Summary:
This patch implements parsing support for the 'arm_sve_vector_bits' type
attribute, defined by the Arm C Language Extensions (ACLE, version 00bet5,
section 3.7.3) for SVE [1].
The purpose of this attribute is to define fixed-length (VLST) versions
of existing sizeless types (VLAT). For example:
#if __ARM_FEATURE_SVE_BITS==512
typedef svint32_t fixed_svint32_t __attribute__((arm_sve_vector_bits(512)));
#endif
Creates a type 'fixed_svint32_t' that is a fixed-length version of
'svint32_t' that is normal-sized (rather than sizeless) and contains
exactly 512 bits. Unlike 'svint32_t', this type can be used in places
such as structs and arrays where sizeless types can't.
Implemented in this patch is the following:
* Defined and tested attribute taking single argument.
* Checks the argument is an integer constant expression.
* Attribute can only be attached to a single SVE vector or predicate
type, excluding tuple types such as svint32x4_t.
* Added the `-msve-vector-bits=<bits>` flag. When specified the
`__ARM_FEATURE_SVE_BITS__EXPERIMENTAL` macro is defined.
* Added a language option to store the vector size specified by the
`-msve-vector-bits=<bits>` flag. This is used to validate `N ==
__ARM_FEATURE_SVE_BITS`, where N is the number of bits passed to the
attribute and `__ARM_FEATURE_SVE_BITS` is the feature macro defined under
the same flag.
The `__ARM_FEATURE_SVE_BITS` macro will be made non-experimental in the final
patch of the series.
[1] https://developer.arm.com/documentation/100987/latest
This is patch 1/4 of a patch series.
Reviewers: sdesmalen, rsandifo-arm, efriedma, ctetreau, cameron.mcinally, rengolin, aaron.ballman
Reviewed By: sdesmalen, aaron.ballman
Differential Revision: https://reviews.llvm.org/D83550
Do not detect device library by default in rocm detector.
Only detect device library in Rocm and HIP toolchain.
Separate detection of HIP runtime and Rocm device library.
Detect rocm path by version file in host toolchains.
Also added detecting rocm version and printing rocm
installation path and version with -v.
Fixed include path and device library detection for
ROCm 3.5.
Added --hip-version option. Renamed --hip-device-lib-path
to --rocm-device-lib-path.
Fixed default value for -fhip-new-launch-api.
Added default -std option for HIP.
Differential Revision: https://reviews.llvm.org/D82930
Summary:
-debug-info-kind=constructor reduces the amount of class debug info that
is emitted; this patch switches to using this as the default.
Constructor homing emits the complete type info for a class only when the
constructor is emitted, so it is expected that there will be some classes that
are not defined in the debug info anymore because they are never constructed,
and we shouldn't need debug info for these classes.
I compared the PDB files for clang, and there are 273 class types that are defined with `=limited`
but not with `=constructor` (out of ~60,000 total class types).
We've looked at a number of the types that are no longer defined with =constructor. The vast
majority of cases are something like class A is used as a parameter in a member function of
some other class B, which is emitted. But the function that uses class A is never called, and class A
is never constructed, and therefore isn't emitted in the debug info.
Bug: https://bugs.llvm.org/show_bug.cgi?id=46537
Subscribers: aprantl, cfe-commits, lldb-commits
Tags: #clang, #lldb
Differential Revision: https://reviews.llvm.org/D79147
Making -g[no-]column-info opt out reduces the length of a typical CC1 command line.
Additionally, in a non-debug compile, we won't see -dwarf-column-info.
Summary:
If you execute the following commandline multiple times, the behavior was not always the same:
clang++ --target=thumbv7em-none-windows-eabi-coff -march=armv7-m -mcpu=cortex-m7 -o temp.obj -c -x c++ empty.cpp
Most of the time the compilation succeeded, but sometimes clang reported this error:
clang++: error: the target architecture 'thumbv7em' is not supported by the target 'thumbv7em-none-windows-eabi'
The cause of the inconsistent behavior was the uninitialized variable Version.
With these commandline arguments, the variable Version was not set by getAsInteger(),
because it cannot parse a number from the substring "7em" (of "thumbv7em").
To get a consistent behaviour, it's enough to initialize the variable Version to zero.
Zero is smaller than 7, so the comparison will be true.
Then the command always fails with the error message seen above.
By using consumeInteger() instead of getAsInteger() we get 7 from the substring "7em"
and the command does not fail.
Reviewers: compnerd, danielkiss
Reviewed By: danielkiss
Subscribers: danielkiss, kristof.beyls, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75453
specified at Command creation, rather than as part of the Tool.
This resolves the hack I just added to allow Darwin toolchain to vary
its level of support based on `-mlinker-version=`.
The change preserves the _current_ settings for response-file support.
Some tools look likely to be declaring that they don't support
response files in error, however I kept them as-is in order for this
change to be a simple refactoring.
Differential Revision: https://reviews.llvm.org/D82782
This fixes a unit test. Otherwise here is the original commit:
1) Shared writable directories like /tmp are a security problem.
2) Systems provide dedicated cache directories these days anyway.
3) This also refines LLVM's cache_directory() on Darwin platforms to use
the Darwin per-user cache directory.
Reviewers: compnerd, aprantl, jakehehrlich, espindola, respindola, ilya-biryukov, pcc, sammccall
Reviewed By: compnerd, sammccall
Subscribers: hiraditya, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D82362
1) Shared writable directories like /tmp are a security problem.
2) Systems provide dedicated cache directories these days anyway.
3) This also refines LLVM's cache_directory() on Darwin platforms to use
the Darwin per-user cache directory.
Reviewers: compnerd, aprantl, jakehehrlich, espindola, respindola, ilya-biryukov, pcc, sammccall
Reviewed By: compnerd, sammccall
Subscribers: hiraditya, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D82362
Summary:
Added support for dynamic memory allocation for globalized variables in
case if execution of target regions in parallel is required.
Reviewers: jdoerfert
Subscribers: jholewinski, yaxunl, guansong, sstefan1, cfe-commits, caomhin
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82324
Add -fpch-instantiate-templates which makes template instantiations be
performed already in the PCH instead of it being done in every single
file that uses the PCH (but every single file will still do it as well
in order to handle its own instantiations). I can see 20-30% build
time saved with the few tests I've tried.
The change may reorder compiler output and also generated code, but
should be generally safe and produce functionally identical code.
There are some rare cases that do not compile with it,
such as test/PCH/pch-instantiate-templates-forward-decl.cpp. If
template instantiation bailed out instead of reporting the error,
these instantiations could even be postponed, which would make them
work.
Enable this by default for clang-cl. MSVC creates PCHs by compiling
them using an empty .cpp file, which means templates are instantiated
while building the PCH and so the .h needs to be self-contained,
making test/PCH/pch-instantiate-templates-forward-decl.cpp to fail
with MSVC anyway. So the option being enabled for clang-cl matches this.
Differential Revision: https://reviews.llvm.org/D69585
On AIX, we use __atexit to register dtor functions rather than __cxa_atexit.
So a driver change is needed to default AIX to using -fno-use-cxa-atexit.
Windows platform does not uses __cxa_atexit either. Following its precedent,
we remove the assertion for when -fuse-cxa-atexit is specified by the user,
do not produce a message and silently default to -fno-use-cxa-atexit behavior.
Differential Revision: https://reviews.llvm.org/D82136
Summary:
Add -ftrivial-auto-var-init-stop-after= to limit the number of times
stack variables are initialized when -ftrivial-auto-var-init= is used to
initialize stack variables to zero or a pattern. This flag can be used
to bisect uninitialized uses of a stack variable exposed by automatic
variable initialization, such as http://crrev.com/c/2020401.
Reviewers: jfb, vitalybuka, kcc, glider, rsmith, rjmccall, pcc, eugenis, vlad.tsyrklevich
Reviewed By: jfb
Subscribers: phosek, hubert.reinterpretcast, srhines, MaskRay, george.burgess.iv, dexonsmith, inglorion, gbiv, llozano, manojgupta, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77168
To support std::complex and some other standard C/C++ functions in HIP device code,
they need to be forced to be __host__ __device__ functions by pragmas. This is done
by some clang standard C++ wrapper headers which are shared between cuda-clang and hip-Clang.
For these standard C++ wapper headers to work properly, specific include path order
has to be enforced:
clang C++ wrapper include path
standard C++ include path
clang include path
Also, these C++ wrapper headers require device version of some standard C/C++ functions
must be declared before including them. This needs to be done by including a default
header which declares or defines these device functions. The default header is always
included before any other headers are included by users.
This patch adds the the default header and include path for HIP.
Differential Revision: https://reviews.llvm.org/D81176
Summary:
An upgrade of LLVM for CrOS [0] containing [1] triggered a bunch of
errors related to writing to reserved registers for a Linux kernel's
arm64 compat vdso (which is a aarch32 image).
After a discussion on LKML [2], it was determined that
-f{no-}omit-frame-pointer was not being specified. Comparing GCC and
Clang [3], it becomes apparent that GCC defaults to omitting the frame
pointer implicitly when optimizations are enabled, and Clang does not.
ie. setting -O1 (or above) implies -fomit-frame-pointer. Clang was
defaulting to -fno-omit-frame-pointer implicitly unless -fomit-frame-pointer
was set explicitly.
Why this becomes a problem is that the Linux kernel's arm64 compat vdso
contains code that uses r7. r7 is used sometimes for the frame pointer
(for example, when targeting thumb (-mthumb)). See useR7AsFramePointer()
in llvm/llvm-project/llvm/lib/Target/ARM/ARMSubtarget.h. This is mostly
for legacy/compatibility reasons, and the 2019 Q4 revision of the ARM
AAPCS looks to standardize r11 as the frame pointer for aarch32, though
this is not yet implemented in LLVM.
Users that are reliant on the implicit value if unspecified when
optimizations are enabled should explicitly choose -fomit-frame-pointer
(new behavior) or -fno-omit-frame-pointer (old behavior).
[0] https://bugs.chromium.org/p/chromium/issues/detail?id=1084372
[1] https://reviews.llvm.org/D76848
[2] https://lore.kernel.org/lkml/20200526173117.155339-1-ndesaulniers@google.com/
[3] https://godbolt.org/z/0oY39t
Reviewers: kristof.beyls, psmith, danalbert, srhines, MaskRay, ostannard, efriedma
Reviewed By: psmith, danalbert, srhines, MaskRay, efriedma
Subscribers: efriedma, olista01, MaskRay, vhscampos, cfe-commits, llvm-commits, manojgupta, llozano, glider, hctim, eugenis, pcc, peter.smith, srhines
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80828
This patch adds clang options:
-fbasic-block-sections={all,<filename>,labels,none} and
-funique-basic-block-section-names.
LLVM Support for basic block sections is already enabled.
+ -fbasic-block-sections={all, <file>, labels, none} : Enables/Disables basic
block sections for all or a subset of basic blocks. "labels" only enables
basic block symbols.
+ -funique-basic-block-section-names: Enables unique section names for
basic block sections, disabled by default.
Differential Revision: https://reviews.llvm.org/D68049
Summary: Before this patch, we use two different ways to pass options to align branch
depending on whether LTO is enabled. For example, `-mbranches-within-32B-boundaries`
w/o LTO and `-Wl,-plugin-opt=-x86-branches-within-32B-boundaries` w/ LTO. It's
inconvenient, so this patch unifies the way: we only need to pass options like
`-mbranches-within-32B-boundaries` to align branches, no matter LTO is enabled or not.
Differential Revision: https://reviews.llvm.org/D80289
-fno-semantic-interposition is currently the CC1 default. (The opposite
disables some interprocedural optimizations.) However, it does not infer
dso_local: on most targets accesses to ExternalLinkage functions/variables
defined in the current module still need PLT/GOT.
This patch makes explicit -fno-semantic-interposition infer dso_local,
so that PLT/GOT can be eliminated if targets implement local aliases
for AsmPrinter::getSymbolPreferLocal (currently only x86).
Currently we check whether the module flag "SemanticInterposition" is 0.
If yes, infer dso_local. In the future, we can infer dso_local unless
"SemanticInterposition" is 1: frontends other than clang will also
benefit from the optimization if they don't bother setting the flag.
(There will be risks if they do want ELF interposition: they need to set
"SemanticInterposition" to 1.)
Enables Machine Outlining for ARM and Thumb2 modes. This is the first
patch of the series which adds all the basic logic for the support, and
only handles tail-calls and thunks.
The outliner can be turned on by using clang -moutline option or -mllvm
-enable-machine-outliner one (like AArch64).
Differential Revision: https://reviews.llvm.org/D76066
SLH doesn't support asm goto and is unlikely to ever support it. Users of asm
goto need a way to choose whether to use asm goto or fallback to an SLH
compatible code path when SLH is enabled. This feature flag will give users
this ability.
Tested via unit test
Reviewed By: mattdr
Differential Revision: https://reviews.llvm.org/D79733
This patch adds a matrix type to Clang as described in the draft
specification in clang/docs/MatrixSupport.rst. It introduces a new option
-fenable-matrix, which can be used to enable the matrix support.
The patch adds new MatrixType and DependentSizedMatrixType types along
with the plumbing required. Loads of and stores to pointers to matrix
values are lowered to memory operations on 1-D IR arrays. After loading,
the loaded values are cast to a vector. This ensures matrix values use
the alignment of the element type, instead of LLVM's large vector
alignment.
The operators and builtins described in the draft spec will will be added in
follow-up patches.
Reviewers: martong, rsmith, Bigcheese, anemet, dexonsmith, rjmccall, aaron.ballman
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D72281
Summary:
`AsmPrinter::emitGlobalIndirectSymbol` is dependent on
`MCStreamer::emitAssignment` to produce `.set` directives for alias
symbols; however, the `.set` pseudo-op on AIX is documented as not
usable with external relocatable terms or expressions, which limits its
applicability in generating alias symbols.
Disable generating aliases on AIX until a different implementation
strategy is available.
Reviewers: cebowleratibm, jasonliu, sfertile, daltenty, DiggerLin
Reviewed By: jasonliu
Differential Revision: https://reviews.llvm.org/D79044
This is a standalone patch and this would help Propeller do a better job of code
layout as it can accurately attribute the profiles to the right internal linkage
function.
This also helps SampledFDO/AutoFDO correctly associate sampled profiles to the
right internal function. Currently, if there is more than one internal symbol
foo, their profiles are aggregated by SampledFDO.
This patch adds a new clang option, -funique-internal-funcnames, to generate
unique names for functions with internal linkage. This patch appends the md5
hash of the module name to the function symbol as a best effort to generate a
unique name for symbols with internal linkage.
Differential Revision: https://reviews.llvm.org/D73307
Prior to this change, for a few compiler-rt libraries such as ubsan and
the profile library, Clang would embed "-defaultlib:path/to/rt-arch.lib"
into the .drective section of every object compiled with
-finstr-profile-generate or -fsanitize=ubsan as appropriate.
These paths assume that the link step will run from the same working
directory as the compile step. There is also evidence that sometimes the
paths become absolute, such as when clang is run from a different drive
letter from the current working directory. This is fragile, and I'd like
to get away from having paths embedded in the object if possible. Long
ago it was suggested that we use this for ASan, and apparently I felt
the same way back then:
https://reviews.llvm.org/D4428#56536
This is also consistent with how all other autolinking usage works for
PS4, Mac, and Windows: they all use basenames, not paths.
To keep things working for people using the standard GCC driver
workflow, the driver now adds the resource directory to the linker
library search path when it calls the linker. This is enough to make
check-ubsan pass, and seems like a generally good thing.
Users that invoke the linker directly (most clang-cl users) will have to
add clang's resource library directory to their linker search path in
their build system. I'm not sure where I can document this. Ideally I'd
also do it in the MSBuild files, but I can't figure out where they go.
I'd like to start with this for now.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D65543
Summary:
Change the default ABI to be compatible with GCC. For 32-bit ELF
targets other than Linux, Clang now returns small structs in registers
r3/r4. This affects FreeBSD, NetBSD, OpenBSD. There is no change for
32-bit Linux, where Clang continues to return all structs in memory.
Add clang options -maix-struct-return (to return structs in memory) and
-msvr4-struct-return (to return structs in registers) to be compatible
with gcc. These options are only for PPC32; reject them on PPC64 and
other targets. The options are like -fpcc-struct-return and
-freg-struct-return for X86_32, and use similar code.
To actually return a struct in registers, coerce it to an integer of the
same size. LLVM may optimize the code to remove unnecessary accesses to
memory, and will return i32 in r3 or i64 in r3:r4.
Fixes PR#40736
Patch by George Koehler!
Reviewed By: jhibbits, nemanjai
Differential Revision: https://reviews.llvm.org/D73290
I didn't realize HIP was a distinct offloading kind, so the subtarget
was looking for -march, which isn't correct for HIP. We also have the
possibility of different denormal defaults in the case of multiple
offload targets, so we need to thread the JobAction through the target
hook.
Summary:
The option `-mpad-max-prefix-size` performs some checking and delegate to MC option `-x86-pad-max-prefix-size`. This option is designed for eliminate NOPs when we need to align something by adding redundant prefixes to instructions, e.g. it can be used along with `-malign-branch`, `-malign-branch-boundary` to prefix padding branch.
It has similar (but slightly different) effect as GAS's option `-malign-branch-prefix-size`, e.g. `-mpad-max-prefix-size` can also elminate NOPs emitted by align directive, so we use a different name here. I remove the option `-malign-branch-prefix-size` since is unimplemented and not needed. If we need to be compatible with GAS, we can make `-malign-branch-prefix-size` an alias for this option later.
Reviewers: jyknight, reames, MaskRay, craig.topper, LuoYuanke
Reviewed By: MaskRay, LuoYuanke
Subscribers: annita.zhang, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77628
For OpenMP target regions to piggy back on the CUDA/AMDGPU/... implementation of math functions,
we include the appropriate definitions inside of an `omp begin/end declare variant match(device={arch(nvptx)})` scope.
This way, the vendor specific math functions will become specialized versions of the system math functions.
When a system math function is called and specialized version is available the selection logic introduced in D75779
instead call the specialized version. In contrast to the code path we used so far, the system header is actually included.
This means functions without specialized versions are available and so are macro definitions.
This should address PR42061, PR42798, and PR42799.
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D75788
Prior to this change the clang interface stubs format resembled
something ending with a symbol list like this:
Symbols:
a: { Type: Func }
This was problematic because we didn't actually want a map format and
also because we didn't like that an empty symbol list required
"Symbols: {}". That is to say without the empty {} llvm-ifs would crash
on an empty list.
With this new format it is much more clear which field is the symbol
name, and instead the [] that is used to express an empty symbol vector
is optional, ie:
Symbols:
- { Name: a, Type: Func }
or
Symbols: []
or
Symbols:
This further diverges the format from existing llvm-elftapi. This is a
good thing because although the format originally came from the same
place, they are not the same in any way.
Differential Revision: https://reviews.llvm.org/D76979
The driver enables -fdiagnostics-show-option by default, so flip the CC1
default to reduce the lengths of common CC1 command lines.
This change also makes ParseDiagnosticArgs() consistently enable
-fdiagnostics-show-option by default.
Nick Desaulniers