AMDGPUTargetTransformInfo.h needs AMDGPUTargetMachine but relies on a
forward declaration of AMDGPUTargetMachine in AMDGPU.h. This patch
adds a forward declaration right in AMDGPUTargetTransformInfo.h.
While we are at it, this patch removes the one in
AMDGPU.h, where it is unnecessary.
Having a custom inliner doesn't really fit in with the new PM's
pipeline. It's also extra technical debt.
amdgpu-inline only does a couple of custom things compared to the normal
inliner:
1) It disables inlining if the number of BBs in a function would exceed
some limit
2) It increases the threshold if there are pointers to private arrays(?)
These can all be handled as TTI inliner hooks.
There already exists a hook for backends to multiply the inlining
threshold.
This way we can remove the custom amdgpu-inline pass.
This caused inline-hint.ll to fail, and after some investigation, it
looks like getInliningThresholdMultiplier() was previously getting
applied twice in amdgpu-inline (https://reviews.llvm.org/D62707 fixed it
not applying at all, so some later inliner change must have fixed
something), so I had to change the threshold in the test.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D94153
And add it to the AMDGPU opt pipeline.
This is a function pass instead of a module pass (like the legacy pass)
because it's getting added to a CGSCCPassManager, and you can't put a
module pass in a CGSCCPassManager.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93885
And add to AMDGPU opt pipeline.
Don't pin an opt run to the legacy PM when -enable-new-pm=1 if these
passes (or passes introduced in https://reviews.llvm.org/D93863) are in
the list of passes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93875
And add them to the pipeline via
AMDGPUTargetMachine::registerPassBuilderCallbacks(), which mirrors
AMDGPUTargetMachine::adjustPassManager().
These passes can't be unconditionally added to PassRegistry.def since
they are only present when the AMDGPU backend is enabled. And there are
no target-specific headers in llvm/include, so parsing these pass names
must occur somewhere in the AMDGPU directory. I decided the best place
was inside the TargetMachine, since the PassBuilder invokes
TargetMachine::registerPassBuilderCallbacks() anyway. If we come up with
a cleaner solution for target-specific passes in the future that's fine,
but there aren't too many target-specific IR passes living in
target-specific directories so it shouldn't be too bad to change in the
future.
Reviewed By: ychen, arsenm
Differential Revision: https://reviews.llvm.org/D93863
This was only used for matching the saddr addressing mode of global
instructions, but this was not implemented correctly. The instruction
definitions aren't even correct, and are defined as using a 64-bit
VGPR component. Eliminate this pass to enable correcting the
instruction definitions. A new matching implementation can work in
GlobalISel or relying on DAG divergence information for the base
address.
Replace TargetMachine.h include with forward declaration and CodeGen.h include in AMDGPU.h.
Exposes a couple of implicit dependencies that require additional forward declarations/includes.
Promote alloca to vector before SROA and loop unroll. If we manage
to eliminate allocas before unroll we may choose to unroll less.
Differential Revision: https://reviews.llvm.org/D80386
Enable clausing of memory loads on gfx10 by adding a new pass to insert
the s_clause instructions that mark the start of each hard clause.
Differential Revision: https://reviews.llvm.org/D79792
Having arbitrary passes looking at the TargetOptions is pretty
messy. This was also disregarding if a function already had an
explicit attribute setting on it. opt/llc now add the attributes to
functions that don't specify the attribute. clang and lld do not call
the function to do this, which they maybe should.
This was also treating unsafe-fp-math as implying the others, and
setting the other attributes based on it. This is not done anywhere
else, and I'm not sure is correct based on the current description of
the option bit.
Effectively reverts 1d8cf2be89
This pass can handle all the optimization
opportunities found just before code emission.
Presently it includes the handling of vcc branch
optimization that was handled earlier in SIInsertSkips.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D76712
The current set of custom combines are only really useful after
legalization, so move them there. There is a lot of overlap in the
boilerplate here, but I think we do want a pretty different set of
combines before and after legalize. I think we will want a lot of
overlap between the post-legalize and a post-regbankselect combiner.
We are relying on atrificial DAG edges inserted by the
MemOpClusterMutation to keep loads and stores together in the
post-RA scheduler. This does not work all the time since it
allows to schedule a completely independent instruction in the
middle of the cluster.
Removed the DAG mutation and added pass to bundle already
clustered instructions. These bundles are unpacked before the
memory legalizer because it does not work with bundles but also
because it allows to insert waitcounts in the middle of a store
cluster.
Removing artificial edges also allows a more relaxed scheduling.
Differential Revision: https://reviews.llvm.org/D72737
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
This pass is a port of the according pass from the HSAIL compiler.
It parses printf calls and setup runtime printf buffer.
After that it copies printf arguments to the buffer and fills in
module metadata for runtime.
Differential Revision: https://reviews.llvm.org/D24035
llvm-svn: 368592
This is split out from my patches to split register allocation into a
separate SGPR and VGPR phase, and has some parts that aren't yet used
(like maintaining LiveIntervals).
This simplifies making the frame pointer register callee saved. As it
is now, the code to determine callee saves needs to predict all the
possible SGPR spills and how many callee saved VGPRs are needed. By
handling this before PrologEpilogInserter, it's possible to just check
the spill objects that already exist.
Change-Id: I29e6df4034afcf949e06f8ef44206acb94696f04
llvm-svn: 365095
The pass works in two modes:
Mode 1: Just set attributes starting from kernels. This can work at
the very beginning of opt and llc pipeline, but cannot clone functions
because it must be a function pass.
Mode 2: Actually clone functions for new attributes. This can only work
after all function passes in the opt pipeline because it has to be a
module pass.
Differential Revision: https://reviews.llvm.org/D63208
llvm-svn: 363586
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360713
This change incorporates an effort by Connor Abbot to change how we deal
with WWM operations potentially trashing valid values in inactive lanes.
Previously, the SIFixWWMLiveness pass would work out which registers
were being trashed within WWM regions, and ensure that the register
allocator did not have any values it was depending on resident in those
registers if the WWM section would trash them. This worked perfectly
well, but would cause sometimes severe register pressure when the WWM
section resided before divergent control flow (or at least that is where
I mostly observed it).
This fix instead runs through the WWM sections and pre allocates some
registers for WWM. It then reserves these registers so that the register
allocator cannot use them. This results in a significant register
saving on some WWM shaders I'm working with (130 -> 104 VGPRs, with just
this change!).
Differential Revision: https://reviews.llvm.org/D59295
llvm-svn: 357400
Add an experimental buffer fat pointer address space that is currently
unhandled in the backend. This commit reserves address space 7 as a
non-integral pointer repsenting the 160-bit fat pointer (128-bit buffer
descriptor + 32-bit offset) that is heavily used in graphics workloads
using the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D58957
llvm-svn: 356373
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
This re-submit of the change also includes a slight modification in
SIISelLowering.cpp to work-around a compiler bug for the powerpc_le
platform that caused a buildbot failure on a previous submission.
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
Work around for ppcle compiler bug
Change-Id: Ie284cf24b2271215be1b9dc95b485fd15000e32b
llvm-svn: 351054
A new pass to manage the Mode register.
Currently this just manages the floating point double precision
rounding requirements, but is intended to be easily extended to
encompass all Mode register settings.
The immediate motivation comes from the requirement to use the
round-to-zero rounding mode for the 16 bit interpolation
instructions, where the rounding mode setting is shared between
16 and 64 bit operations.
llvm-svn: 348754
Introduces DPP pseudo instructions and the pass that combines DPP mov with subsequent uses.
Differential revision: https://reviews.llvm.org/D53762
llvm-svn: 347993
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
This allows testing AMDGPU alias analysis like any
other alias analysis pass. This fixes the existing
test pointlessly running opt -O3 when it really
just wants to run the one analysis.
Before there was no way to test this using -aa-eval
with opt, since the default constructed pass
is run. The wrapper subclass allows the
default constructor to pass the necessary callback.
llvm-svn: 346353
AMDGPU currently only supports direct calls, but at lower optimisation levels it
fails to lower statically direct calls which appear indirect due to a bitcast.
Add a pass to visit all CallSites and use CallPromotionUtils to "devirtualize"
calls.
Differential Revision: https://reviews.llvm.org/D52741
llvm-svn: 345382
This commit adds a new IR level pass to the AMDGPU backend to perform
atomic optimizations. It works by:
- Running through a function and finding atomicrmw add/sub or uses of
the atomic buffer intrinsics for add/sub.
- If all arguments except the value to be added/subtracted are uniform,
record the value to be optimized.
- Run through the atomic operations we can optimize and, depending on
whether the value is uniform/divergent use wavefront wide operations
(DPP in the divergent case) to calculate the total amount to be
atomically added/subtracted.
- Then let only a single lane of each wavefront perform the atomic
operation, reducing the total number of atomic operations in flight.
- Lastly we recombine the result from the single lane to each lane of
the wavefront, and calculate our individual lanes offset into the
final result.
Differential Revision: https://reviews.llvm.org/D51969
llvm-svn: 343973
Kazu Hirata