This converts the VPReductionRecipe into a VPValue, like other
VPRecipe's in preparation for traversing def-use chains. It also makes
it a VPUser, now storing the used VPValues as operands.
It doesn't yet change how the VPReductionRecipes are created. It will
need to call replaceAllUsesWith from the original recipe they replace,
but that is not done yet as VPWidenRecipe need to be created first.
Differential Revision: https://reviews.llvm.org/D88382
Some older code - and code copied from older code - still directly tested against the singelton result of SE::getCouldNotCompute. Using the isa<SCEVCouldNotCompute> form is both shorter, and more readable.
Fix PR47390.
The primary induction should be considered alive when folding tail by masking,
because it will be used by said masking; even when it may otherwise appear
useless: feeding only its own 'bump', which is correctly considered dead, and
as the 'bump' of another induction variable, which may wrongfully want to
consider its bump = the primary induction, dead.
Differential Revision: https://reviews.llvm.org/D92017
A uniform load is one which loads from a uniform address across all lanes. As currently implemented, we cost model such loads as if we did a single scalar load + a broadcast, but the actual lowering replicates the load once per lane.
This change tweaks the lowering to use the REPLICATE strategy by marking such loads (and the computation leading to their memory operand) as uniform after vectorization. This is a useful change in itself, but it's real purpose is to pave the way for a following change which will generalize our uniformity logic.
In review discussion, there was an issue raised with coupling cost modeling with the lowering strategy for uniform inputs. The discussion on that item remains unsettled and is pending larger architectural discussion. We decided to move forward with this patch as is, and revise as warranted once the bigger picture design questions are settled.
Differential Revision: https://reviews.llvm.org/D91398
This change introduces a new IR intrinsic named `llvm.pseudoprobe` for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
A pseudo probe is used to collect the execution count of the block where the probe is instrumented. This requires a pseudo probe to be persisting. The LLVM PGO instrumentation also instruments in similar places by placing a counter in the form of atomic read/write operations or runtime helper calls. While these operations are very persisting or optimization-resilient, in theory we can borrow the atomic read/write implementation from PGO counters and cut it off at the end of compilation with all the atomics converted into binary data. This was our initial design and we’ve seen promising sample correlation quality with it. However, the atomics approach has a couple issues:
1. IR Optimizations are blocked unexpectedly. Those atomic instructions are not going to be physically present in the binary code, but since they are on the IR till very end of compilation, they can still prevent certain IR optimizations and result in lower code quality.
2. The counter atomics may not be fully cleaned up from the code stream eventually.
3. Extra work is needed for re-targeting.
We choose to implement pseudo probes based on a special LLVM intrinsic, which is expected to have most of the semantics that comes with an atomic operation but does not block desired optimizations as much as possible. More specifically the semantics associated with the new intrinsic enforces a pseudo probe to be virtually executed exactly the same number of times before and after an IR optimization. The intrinsic also comes with certain flags that are carefully chosen so that the places they are probing are not going to be messed up by the optimizer while most of the IR optimizations still work. The core flags given to the special intrinsic is `IntrInaccessibleMemOnly`, which means the intrinsic accesses memory and does have a side effect so that it is not removable, but is does not access memory locations that are accessible by any original instructions. This way the intrinsic does not alias with any original instruction and thus it does not block optimizations as much as an atomic operation does. We also assign a function GUID and a block index to an intrinsic so that they are uniquely identified and not merged in order to achieve good correlation quality.
Let's now look at an example. Given the following LLVM IR:
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
br i1 %cmp, label %bb1, label %bb2
bb1:
br label %bb3
bb2:
br label %bb3
bb3:
ret void
}
```
The instrumented IR will look like below. Note that each `llvm.pseudoprobe` intrinsic call represents a pseudo probe at a block, of which the first parameter is the GUID of the probe’s owner function and the second parameter is the probe’s ID.
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86490
rGf571fe6df585127d8b045f8e8f5b4e59da9bbb73 led to a warning of an unused
variable for MaxSafeDepDist (written but not used). It seems this
variable and assignment can be safely removed.
The assertion that vector widths are <= 256 elements was hard wired in the LV code. Eg, VE allows for vectors up to 512 elements. Test again the TTI vector register bit width instead - this is an NFC for non-asserting builds.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D91518
This patch introduces a new VPDef class, which can be used to
manage VPValues defined by recipes/VPInstructions.
The idea here is to mirror VPUser for values defined by a recipe. A
VPDef can produce either zero (e.g. a store recipe), one (most recipes)
or multiple (VPInterleaveRecipe) result VPValues.
To traverse the def-use chain from a VPDef to its users, one has to
traverse the users of all values defined by a VPDef.
VPValues now contain a pointer to their corresponding VPDef, if one
exists. To traverse the def-use chain upwards from a VPValue, we first
need to check if the VPValue is defined by a VPDef. If it does not have
a VPDef, this means we have a VPValue that is not directly defined
iniside the plan and we are done.
If we have a VPDef, it is defined inside the region by a recipe, which
is a VPUser, and the upwards def-use chain traversal continues by
traversing all its operands.
Note that we need to add an additional field to to VPVAlue to link them
to their defs. The space increase is going to be offset by being able to
remove the SubclassID field in future patches.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D90558
For the scattered operands of load instructions it makes sense
to use gathering load intrinsic, which can lower to native instruction
for X86/AVX512 and ARM/SVE. This also enables building
vectorization tree with entries containing scattered operands.
The next step is to add scattered store.
Fixes PR47629 and PR47623
Differential Revision: https://reviews.llvm.org/D90445
This patch turns VPWidenGEPRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84683
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
This reverts commits:
* [LoopVectorizer] NFCI: Calculate register usage based on TLI.getTypeLegalizationCost.
b873aba394.
* [LoopVectorizer] Silence warning in GetRegUsage.
9ff701100a.
This patch silences the warning:
error: lambda capture 'DL' is not used [-Werror,-Wunused-lambda-capture]
auto GetRegUsage = [&DL, &TTI=TTI](Type *Ty, ElementCount VF) {
~^~~
1 error generated.
Introduced in:
https://reviews.llvm.org/rGb873aba3943c067a5efd5303cbdf5aeb0732cf88
This is more accurate than dividing the bitwidth based on the element count by the
maximum register size, as it can just reuse whatever has been calculated for
legalization of these types.
This change is also necessary when calculating register usage for scalable vectors, where
the legalization of these types cannot be done based on the widest register size, because
that does not take the 'vscale' component into account.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91059
This patch turns VPWidenSelectRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84682
Interfaces changed to take `ElementCount` as parameters:
* LoopVectorizationPlanner::buildVPlans
* LoopVectorizationPlanner::buildVPlansWithVPRecipes
* LoopVectorizationCostModel::selectVectorizationFactor
This patch is NFC for fixed-width vectors.
Reviewed By: dmgreen, ctetreau
Differential Revision: https://reviews.llvm.org/D90879
This patch turns VPWidenCall into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84681
This patch changes the type of Start, End in VFRange to be an ElementCount
instead of `unsigned`. This is done as preparation to make VPlans for
scalable vectors, but is otherwise NFC.
Reviewed By: dmgreen, fhahn, vkmr
Differential Revision: https://reviews.llvm.org/D90715
This reverts the revert commit 408c4408fa.
This version of the patch includes a fix for a crash caused by
treating ICmp/FCmp constant expressions as instructions.
Original message:
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
This reverts the revert commit a1b53db324.
This patch includes a fix for a reported issue, caused by
matchSelectPattern returning UMIN for selects of pointers in
some cases by looking to some connected casts.
For now, ensure integer instrinsics are only returned for selects of
ints or int vectors.
This reverts commit 1922570489.
This appears to cause a crash in the following example
a, b, c;
l() {
int e = a, f = l, g, h, i, j;
float *d = c, *k = b;
for (;;)
for (; g < f; g++) {
k[h] = d[i];
k[h - 1] = d[j];
h += e << 1;
i += e;
}
}
clang -cc1 -triple i386-unknown-linux-gnu -emit-obj -target-cpu pentium-m -O1 -vectorize-loops -vectorize-slp reduced.c
llvm::Type *llvm::Type::getWithNewBitWidth(unsigned int) const: Assertion `isIntOrIntVectorTy() && "Original type expected to be a vector of integers or a scalar integer."' failed.
As per the comment in VPRecipeBase, clients should not rely on
getVPRecipeID, as it may change in the future. It should only be used in
classof implementations. Use isa instead in getFirstNonPhi.
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
Reviewed By: dmgreen, RKSimon
Differential Revision: https://reviews.llvm.org/D90070
Some architectures do not have general vector select instructions (e.g.
AArch64). But some cmp/select patterns can be vectorized using other
instructions/intrinsics.
One example is using min/max instructions for certain patterns.
This patch updates the cost calculations for selects in the SLP
vectorizer to consider using min/max intrinsics.
This patch does not change SLP vectorizer's codegen itself to actually
generate those intrinsics, but relies on the backends to lower the
vector cmps & selects. This keeps things simple on the SLP side and
works well in practice for AArch64.
This exposes additional SLP vectorization opportunities in some
benchmarks on AArch64 (-O3 -flto).
Metric: SLP.NumVectorInstructions
Program base slp diff
test-suite...ications/JM/ldecod/ldecod.test 502.00 697.00 38.8%
test-suite...ications/JM/lencod/lencod.test 1023.00 1414.00 38.2%
test-suite...-typeset/consumer-typeset.test 56.00 65.00 16.1%
test-suite...6/464.h264ref/464.h264ref.test 804.00 822.00 2.2%
test-suite...006/453.povray/453.povray.test 3335.00 3357.00 0.7%
test-suite...CFP2000/177.mesa/177.mesa.test 2110.00 2121.00 0.5%
test-suite...:: External/Povray/povray.test 2378.00 2382.00 0.2%
Reviewed By: RKSimon, samparker
Differential Revision: https://reviews.llvm.org/D89969
These logically belong together since it's a base commit plus
followup fixes to less common build configurations.
The patches are:
Revert "CfgInterface: rename interface() to getInterface()"
This reverts commit a74fc48158.
Revert "Wrap CfgTraitsFor in namespace llvm to please GCC 5"
This reverts commit f2a06875b6.
Revert "Try to make GCC5 happy about the CfgTraits thing"
This reverts commit 03a5f7ce12.
Revert "Introduce CfgTraits abstraction"
This reverts commit c0cdd22c72.
The warning would fire when calling isDereferenceableAndAlignedInLoop
with a scalable load. Calling isDereferenceableAndAlignedInLoop with a
scalable load would result in the use of the now deprecated implicit
cast of TypeSize to uint64_t through the overloaded operator.
This patch fixes this issue by:
- no longer considering vector loads as candidates in
canVectorizeWithIfConvert. This doesn't make sense in the context of
identifying scalar loads to vectorize.
- making use of getFixedSize inside isDereferenceableAndAlignedInLoop --
this removes the dependency on the deprecated interface, and will
trigger an assertion error if the function is ever called with a
scalable type.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D89798
The CfgTraits abstraction simplfies writing algorithms that are
generic over the type of CFG, and enables writing such algorithms
as regular non-template code that operates on opaque references
to CFG blocks and values.
Implementations of CfgTraits provide operations on the concrete
CFG types, e.g. `IrCfgTraits::BlockRef` is `BasicBlock *`.
CfgInterface is an abstract base class which provides operations
on opaque types CfgBlockRef and CfgValueRef. Those opaque types
encapsulate a `void *`, but the meaning depends on the concrete
CFG type. For example, MachineCfgTraits -- for use with MachineIR
in SSA form -- encodes a Register inside CfgValueRef. Converting
between concrete references and opaque/generic ones is done by
CfgTraits::{fromGeneric,toGeneric}. Convenience methods
CfgTraits::{un}wrap{Iterator,Range} are available as well.
Writing algorithms in terms of CfgInterface adds some overhead
(virtual method calls, plus in same cases it removes the
opportunity to inline iterators), but can be much more convenient
since generic algorithms can be written as non-templates.
This patch adds implementations of CfgTraits for all CFGs on
which dominator trees are calculated, so that the dominator
tree can be ported to this machinery. Only IrCfgTraits (LLVM IR)
and MachineCfgTraits (Machine IR in SSA form) are complete, the
other implementations are limited to the absolute minimum
required to make the upcoming dominator tree changes work.
v5:
- fix MachineCfgTraits::blockdef_iterator and allow it to iterate over
the instructions in a bundle
- use MachineBasicBlock::printName
v6:
- implement predecessors/successors for all CfgTraits implementations
- fix error in unwrapRange
- rename toGeneric/fromGeneric into wrapRef/unwrapRef to have naming
that is consistent with {wrap,unwrap}{Iterator,Range}
- use getVRegDef instead of getUniqueVRegDef
v7:
- std::forward fix in wrapping_iterator
- fix typos
v8:
- cleanup operators on CfgOpaqueType
- address other review comments
Change-Id: Ia75f4f268fded33fca11218a7d578c9aec1f3f4d
Differential Revision: https://reviews.llvm.org/D83088
We can not bitcast pointers across different address spaces, and VectorCombine
should be careful when it attempts to find the original source of the loaded
data.
Differential Revision: https://reviews.llvm.org/D89577
This is an initial cleanup of the way LoopVersioning interacts with LAA.
Currently LoopVersioning has 2 ways of initializing things:
1. Passing LAI and passing UseLAIChecks = true
2. Passing UseLAIChecks = false, followed by calling setSCEVChecks and
setAliasChecks.
Both ways of initializing lead to the same result and the duplication
seems more complicated than necessary.
This patch removes the UseLAIChecks flag from the constructor and the
setSCEVChecks & setAliasChecks helpers and move initialization
exclusively to the constructor.
This simplifies things, by providing a single way to initialize
LoopVersioning and reducing duplication.
Reviewed By: Meinersbur, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84406
This reverts the revert commit 710aceb645
and includes a fix for a memsan failure.
Original message:
This patch turns VPMemoryInstructionRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
LV fails with assertion checking that UF > 0. We already set UF to 1 if it is 0 except the case when IC > MaxInterleaveCount. The fix is to set UF to 1 for that case as well.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D87679
This patch turns VPMemoryInstructionRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84680
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
This expands upon the inloop reductions added in e9761688e41cb9e976,
allowing them to be inserted into tail folded loops. Reductions are
generates with the form:
x = select(mask, vecop, zero)
v = vecreduce.add(x)
c = add chain, v
Where zero here is chosen as the identity value for add reductions. The
backend is then expected to fold the select and the vecreduce into a
single predicated instruction.
Most of the code is fairly straight forward, except for the creation of
blockmasks which need to ensure they are created in dominance order. The
order they are added is altered to be after any phis, keeping the
requirements for the underlying IR.
Differential Revision: https://reviews.llvm.org/D84451
We currently collect the ICmp and Add from an induction variable,
marking them as dead so that vplan values are not created for them. This
extends that to include any single use trunk from the ICmp, which allows
the Add to more readily be removed too.
This can help with costing vplan nodes, as the ICmp and Add are more
reliably removed and are not double-counted.
Differential Revision: https://reviews.llvm.org/D88873
Update the code responsible for deleting VPBBs and recipes to properly
update users and release operands.
This is another preparation for D84680 & following patches towards
enabling modeling def-use chains in VPlan.
This adds a helper to convert a VPRecipeBase pointer to a VPUser, for
recipes that inherit from VPUser. Once VPRecipeBase directly inherits
from VPUser this helper can be removed.
When updating operands of a VPUser, we also have to adjust the list of
users for the new and old VPValues. This is required once we start
transitioning recipes to become VPValues.
Now that VPUser is not inheriting from VPValue, we can take the next
step and turn the recipes that already manage their operands via VPUser
into VPUsers directly. This is another small step towards traversing
def-use chains in VPlan.
This is NFC with respect to the generated code, but makes the interface
more powerful.
These were only really used for 2 things. One was to check if the operand matches the phi if it exists. The other was for the createOp method to build the reduction.
For the first case we still have the operation we just need to know how to index its operands. So I've modified getLHS/getRHS to just use the opcode/kind to know how to find the right operands on an instruction that is now passed in.
For the other case we had to create an OperationData object to set the LHS/RHS values and copy the opcode/kind from another object. We would then just call createOp on that temporary object. Instead I've made LHS/RHS arguments to createOp and removed all these temporary objects.
Differential Revision: https://reviews.llvm.org/D88193
All of the callers already have an Instruction *. Many of them
from a dyn_cast.
Also update the OperationData constructor to use a Instruction&
to remove a dyn_cast and make it clear that the pointer is non-null.
Differential Revision: https://reviews.llvm.org/D88132
This refactors VPuser to not inherit from VPValue to facilitate
introducing operations that introduce multiple VPValues (e.g.
VPInterleaveRecipe).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D84679
This provides a convenient way to print VPValues and recipes in a
debugger. In particular it saves the user from instantiating
VPSlotTracker to print recipes or values.
The implementation of gather() should be reduced too,
but this change by itself makes things a little clearer:
we don't try to gather to a different type or
number-of-values than whatever is passed in as the value
list itself.
If some leaves have the same instructions to be vectorized, we may
incorrectly evaluate the best order for the root node (it is built for the
vector of instructions without repeated instructions and, thus, has less
elements than the root node). In this case we just can not try to reorder
the tree + we may calculate the wrong number of nodes that requre the
same reordering.
For example, if the root node is \<a+b, a+c, a+d, f+e\>, then the leaves
are \<a, a, a, f\> and \<b, c, d, e\>. When we try to vectorize the first
leaf, it will be shrink to \<a, b\>. If instructions in this leaf should
be reordered, the best order will be \<1, 0\>. We need to extend this
order for the root node. For the root node this order should look like
\<3, 0, 1, 2\>. This patch allows extension of the orders of the nodes
with the reused instructions.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D45263
If some leaves have the same instructions to be vectorized, we may
incorrectly evaluate the best order for the root node (it is built for the
vector of instructions without repeated instructions and, thus, has less
elements than the root node). In this case we just can not try to reorder
the tree + we may calculate the wrong number of nodes that requre the
same reordering.
For example, if the root node is \<a+b, a+c, a+d, f+e\>, then the leaves
are \<a, a, a, f\> and \<b, c, d, e\>. When we try to vectorize the first
leaf, it will be shrink to \<a, b\>. If instructions in this leaf should
be reordered, the best order will be \<1, 0\>. We need to extend this
order for the root node. For the root node this order should look like
\<3, 0, 1, 2\>. This patch allows extension of the orders of the nodes
with the reused instructions.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D45263
As discussed in:
https://llvm.org/PR47558
...there are several potential fixes/follow-ups visible
in the test case, but this is the quickest and safest
fix of the perf regression.
This is one (small) part of improving PR41312:
https://llvm.org/PR41312
As shown there and in the smaller tests here, if we have some member of the
reduction values that does not match the others, we want to push it to the
end (bring the matching members forward and together).
In the regression tests, we have 5 candidates for the 4 slots of the reduction.
If the one "wrong" compare is grouped with the others, it prevents forming the
ideal v4i1 compare reduction.
Differential Revision: https://reviews.llvm.org/D87772
~~D65060 uncovered that trying to use BFI in loop passes can lead to non-deterministic behavior when blocks are re-used while retaining old BFI data.~~
~~To make sure BFI is preserved through loop passes a Value Handle (VH) callback is registered on blocks themselves. When a block is freed it now also wipes out the accompanying BFI entry such that stale BFI data can no longer persist resolving the determinism issue. ~~
~~An optimistic approach would be to incrementally update BFI information throughout the loop passes rather than only invalidating them on removed blocks. The issues with that are:~~
~~1. It is not clear how BFI information should be incrementally updated: If a block is duplicated does its BFI information come with? How about if it's split/modified/moved around? ~~
~~2. Assuming we can address these problems the implementation here will be a massive undertaking. ~~
~~There's a known need of BFI in LICM analysis which requires correct but not incrementally updated BFI data. A follow-up change can register BFI in all loop passes so this preserved but potentially lossy data is available to any loop pass that wants it.~~
See: D75341 for an identical implementation of preserving BFI via VH callbacks. The previous statements do still apply but this change no longer has to be in this diff because it's already upstream 😄 .
This diff also moves BFI to be a part of LoopStandardAnalysisResults since the previous method using getCachedResults now (correctly!) statically asserts (D72893) that this data isn't static through the loop passes.
Testing
Ninja check
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D86156
For scalable type, the aggregated size is unknown at compile-time.
Skip instructions with scalable type to ensure the list of instructions
for vectorizeSimpleInstructions does not contains any scalable-vector instructions.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D87550
Similar to the tsan suppression in
`Utils/VNCoercion.cpp:getLoadLoadClobberFullWidthSize` (rL175034; load widening used by GVN),
the D81766 optimization should be suppressed under tsan due to potential
spurious data race reports:
struct A {
int i;
const short s; // the load cannot be vectorized because
int modify; // it overlaps with bytes being concurrently modified
long pad1, pad2;
};
// __tsan_read16 does not know that some bytes are undef and accessing is safe
Similarly, under asan, users can mark memory regions with
`__asan_poison_memory_region`. A widened load can lead to a spurious
use-after-poison error. hwasan/memtag should be similarly suppressed.
`mustSuppressSpeculation` suppresses asan/hwasan/tsan but not memtag, so
we need to exclude memtag in `vectorizeLoadInsert`.
Note, memtag suppression can be relaxed if the load is aligned to the
its granule (usually 16), but that is out of scope of this patch.
Reviewed By: spatel, vitalybuka
Differential Revision: https://reviews.llvm.org/D87538
Forward declare AAResults instead of the (old) AliasAnalysis type.
Remove includes from SLPVectorizer.cpp that are already included in SLPVectorizer.h.
This allows the backend to tell the vectorizer to produce inloop
reductions through a TTI hook.
For the moment on ARM under MVE this means allowing integer add
reductions of the correct size. In the future this can include integer
min/max too, under -Os.
Differential Revision: https://reviews.llvm.org/D75512
The test example based on PR47450 shows that we can
match non-byte-sized shifts, but those won't ever be
bswap opportunities. This isn't a full fix (we'd still
match if the shifts were by 8-bits for example), but
this should be enough until there's evidence that we
need to do more (this is a borderline case for
vectorization in the first place).
Previously we could match fcmp+select to a reduction if the fcmp had
the nonans fast math flag. But if the select had the nonans fast
math flag, InstCombine would turn it into a fminnum/fmaxnum intrinsic
before SLP gets to it. Seems fairly likely that if one of the
fcmp+select pair have the fast math flag, they both would.
My plan is to start vectorizing the fmaxnum/fminnum version soon,
but I wanted to get this code out as it had some of the strangest
fast math flag behaviors.
First, shuffle cost for scalable type is not known for scalable type;
Second, we cannot reason if the narrowed shuffle mask for scalable type
is a splat or not.
E.g., Bitcast splat vector from type <vscale x 4 x i32> to <vscale x 8 x i16>
will involve narrowing shuffle mask <vscale x 4 x i32> zeroinitializer to
<vscale x 8 x i32> with element sequence of <0, 1, 0, 1, ...>, which cannot be
reasoned if it's a valid splat or not.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86995
This is an enhancement to D81766 to allow loading the minimum target
vector type into an IR vector with a different number of elements.
In one of the motivating tests from PR16739, SLP creates <2 x float>
load ops mixed with <4 x float> insert ops, so we want to handle that
pattern in addition to potential oversized vectors created by the
vectorizers.
For now, we are assuming the insert/extract subvector with undef is
free because there is no exact corresponding TTI modeling for that.
Differential Revision: https://reviews.llvm.org/D86160
Interleave for small loops that have reductions inside,
which breaks dependencies and expose.
This gives very significant performance improvements for some benchmarks.
Because small loops could be in very hot functions in real applications.
Differential Revision: https://reviews.llvm.org/D81416
addRuntimeChecks uses SCEVExpander, which relies on the DT/LoopInfo to
be up-to-date. Changing the CFG afterwards may invalidate some inserted
instructions, especially LCSSA phis.
Reorder the code to first update the CFG and then create the runtime
checks. This should not have any impact on the generated code, as we
adjust the CFG and generate runtime checks together.
Fixes PR47343.
As discussed in D86798, it's not clear if the caller code
works with a more liberal definition of "commutative" that
includes intrinsics like min/max. This makes the binop
restriction (current functionality is unchanged) explicit
until the code is audited/tested.
Move bail out when optimizing for size before runtime check generation.
In that case, we do not use the result of the expansion, the expanded
instruction will be dead and cleaned up later.
By doing the check before expanding the runtime-checks, we can save a
bit of unnecessary work.
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
This implements 2 different vectorisation fallback strategies if tail-folding
fails: 1) don't vectorise at all, or 2) vectorise using a scalar epilogue. This
can be controlled with option -prefer-predicate-over-epilogue, that has been
changed to take a numeric value corresponding to the tail-folding preference
and preferred fallback.
Patch by: Pierre van Houtryve, Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D79783
This adapts LV to the new semantics of get.active.lane.mask as discussed in
D86147, which means that the LV now emits intrinsic get.active.lane.mask with
the loop tripcount instead of the backedge-taken count as its second argument.
The motivation for this is described in D86147.
Differential Revision: https://reviews.llvm.org/D86304
Changes:
* Change `ToVectorTy` to deal directly with `ElementCount` instances.
* `VF == 1` replaced with `VF.isScalar()`.
* `VF > 1` and `VF >=2` replaced with `VF.isVector()`.
* `VF <=1` is replaced with `VF.isZero() || VF.isScalar()`.
* Replaced the uses of `llvm::SmallSet<ElementCount, ...>` with
`llvm::SmallSetVector<ElementCount, ...>`. This avoids the need of an
ordering function for the `ElementCount` class.
* Bits and pieces around printing the `ElementCount` to string streams.
To guarantee that this change is a NFC, `VF.Min` and asserts are used
in the following places:
1. When it doesn't make sense to deal with the scalable property, for
example:
a. When computing unrolling factors.
b. When shuffle masks are built for fixed width vector types
In this cases, an
assert(!VF.Scalable && "<mgs>") has been added to make sure we don't
enter coepaths that don't make sense for scalable vectors.
2. When there is a conscious decision to use `FixedVectorType`. These
uses of `FixedVectorType` will likely be removed in favour of
`VectorType` once the vectorizer is generic enough to deal with both
fixed vector types and scalable vector types.
3. When dealing with building constants out of the value of VF, for
example when computing the vectorization `step`, or building vectors
of indices. These operation _make sense_ for scalable vectors too,
but changing the code in these places to be generic and make it work
for scalable vectors is to be submitted in a separate patch, as it is
a functional change.
4. When building the potential VFs in VPlan. Making the VPlan generic
enough to handle scalable vectorization factors is a functional change
that needs a separate patch. See for example `void
LoopVectorizationPlanner::buildVPlans(unsigned MinVF, unsigned
MaxVF)`.
5. The class `IntrinsicCostAttribute`: this class still uses `unsigned
VF` as updating the field to use `ElementCount` woudl require changes
that could result in changing the behavior of the compiler. Will be done
in a separate patch.
7. When dealing with user input for forcing the vectorization
factor. In this case, adding support for scalable vectorization is a
functional change that migh require changes at command line.
Note that in some places the idiom
```
unsigned VF = ...
auto VTy = FixedVectorType::get(ScalarTy, VF)
```
has been replaced with
```
ElementCount VF = ...
assert(!VF.Scalable && ...);
auto VTy = VectorType::get(ScalarTy, VF)
```
The assertion guarantees that the new code is (at least in debug mode)
functionally equivalent to the old version. Notice that this change had been
possible because none of the methods that are specific to `FixedVectorType`
were used after the instantiation of `VTy`.
Reviewed By: rengolin, ctetreau
Differential Revision: https://reviews.llvm.org/D85794
Changes:
* Change `ToVectorTy` to deal directly with `ElementCount` instances.
* `VF == 1` replaced with `VF.isScalar()`.
* `VF > 1` and `VF >=2` replaced with `VF.isVector()`.
* `VF <=1` is replaced with `VF.isZero() || VF.isScalar()`.
* Add `<` operator to `ElementCount` to be able to use
`llvm::SmallSetVector<ElementCount, ...>`.
* Bits and pieces around printing the ElementCount to string streams.
* Added a static method to `ElementCount` to represent a scalar.
To guarantee that this change is a NFC, `VF.Min` and asserts are used
in the following places:
1. When it doesn't make sense to deal with the scalable property, for
example:
a. When computing unrolling factors.
b. When shuffle masks are built for fixed width vector types
In this cases, an
assert(!VF.Scalable && "<mgs>") has been added to make sure we don't
enter coepaths that don't make sense for scalable vectors.
2. When there is a conscious decision to use `FixedVectorType`. These
uses of `FixedVectorType` will likely be removed in favour of
`VectorType` once the vectorizer is generic enough to deal with both
fixed vector types and scalable vector types.
3. When dealing with building constants out of the value of VF, for
example when computing the vectorization `step`, or building vectors
of indices. These operation _make sense_ for scalable vectors too,
but changing the code in these places to be generic and make it work
for scalable vectors is to be submitted in a separate patch, as it is
a functional change.
4. When building the potential VFs in VPlan. Making the VPlan generic
enough to handle scalable vectorization factors is a functional change
that needs a separate patch. See for example `void
LoopVectorizationPlanner::buildVPlans(unsigned MinVF, unsigned
MaxVF)`.
5. The class `IntrinsicCostAttribute`: this class still uses `unsigned
VF` as updating the field to use `ElementCount` woudl require changes
that could result in changing the behavior of the compiler. Will be done
in a separate patch.
7. When dealing with user input for forcing the vectorization
factor. In this case, adding support for scalable vectorization is a
functional change that migh require changes at command line.
Differential Revision: https://reviews.llvm.org/D85794
As part of D84741, this adds a target hook for the
preferPredicatedReductionSelect option and makes use
of it under MVE, allowing us to tail predicate most
reduction loops.
Differential Revision: https://reviews.llvm.org/D85980
The normal scheme for tail folding reductions is to use:
loop:
p = phi(0, a)
mask = ...
x = masked_load(..., mask)
a = add(x, p)
s = select(mask, a, p)
This means we need to keep the register p and a alive out of the loop, plus
the mask. On a target with predicated operations we can instead generate
the phi as p = phi(0, s). This ensures the select in the loop and we can
fold select(m, add(a, b), c) to something like a vaddt c, a, b using the
m predicate. This in turn allows us to tail predicate the entire loop.
Differential Revision: https://reviews.llvm.org/D84741
D81345 appears to accidentally disables vectorization when explicitly
enabled. As PGSO isn't currently accessible from LoopAccessInfo, revert back to
the vectorization with versioning-for-unit-stride for PGSO.
Differential Revision: https://reviews.llvm.org/D85784
This is a fixup to commit 43bdac2906, to make sure the
address space from the original load pointer is retained in the
vector pointer.
Resolves problem with
Assertion `castIsValid(op, S, Ty) && "Invalid cast!"' failed.
due to address space mismatch.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D85912
Based on post-commit discussion in D81766, Hexagon sets this to "0".
I'll see if I can come up with a test, but making the obvious
code fix first to unblock that target.
The entries in VectorizableTree are not necessarily ordered by their
position in basic blocks. Collect them and order them by dominance so
later instructions are guaranteed to be visited first. For instructions
in different basic blocks, we only scan to the beginning of the block,
so their order does not matter, as long as all instructions in a basic
block are grouped together. Using dominance ensures a deterministic order.
The modified test case contains an example where we compute a wrong
spill cost (2) without this patch, even though there is no call between
any instruction in the bundle.
This seems to have limited practical impact, .e.g on X86 with a recent
Intel Xeon CPU with -O3 -march=native -flto on MultiSource,SPEC2000,SPEC2006
there are no binary changes.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D82444
This patch was adjusted to match the most basic pattern that starts with an insertelement
(so there's no extract created here). Hopefully, that removes any concern about
interfering with other passes. Ie, the transform should almost always be profitable.
We could make an argument that this could be part of canonicalization, but we
conservatively try not to create vector ops from scalar ops in passes like instcombine.
If the transform is not profitable, the backend should be able to re-scalarize the load.
Differential Revision: https://reviews.llvm.org/D81766
Summary:
This patch takes the indices operands of `insertelement`/`insertvalue`
into account while generation of seed elements for `findBuildAggregate()`.
This function has kept the original order of `insert`s before.
Also this patch optimizes `findBuildAggregate()` preventing it from
redundant temporary vector allocations and its multiple reversing.
Fixes llvm.org/pr44067
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83779
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
This reverts commit e9761688e4. It breaks the build:
```
~/src/llvm-project/llvm/lib/Analysis/IVDescriptors.cpp:868:10: error: no viable conversion from returned value of type 'SmallVector<[...], 8>' to function return type 'SmallVector<[...], 4>'
return ReductionOperations;
```
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
This patch tries to improve readability and maintenance
of createVectorizedLoopSkeleton by reorganizing some lines,
updating some of the comments and breaking it up into
smaller logical units.
Reviewed By: pjeeva01
Differential Revision: https://reviews.llvm.org/D83824
No widening decisions will be computed for instructions outside the
loop. Do not try to get a widening decision. The load/store will be just
a scalar load, so treating at as normal should be fine I think.
Fixes PR46950.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D85087
This removes some unneeded block masks when we don't have any
reductions. It should not have any effect on codegen as the values
created are dead anyway.
Differential Revision: https://reviews.llvm.org/D81415
In vectorizeChainsInBlock we try to collect chains of PHI nodes
that have the same element type, but the code is relying upon
the implicit conversion from TypeSize -> uint64_t. For now, I have
modified the code to ignore PHI nodes with scalable types.
Differential Revision: https://reviews.llvm.org/D83542
Currently, getCastInstrCost has limited information about the cast it's
rating, often just the opcode and types. Sometimes there is a context
instruction as well, but it isn't trustworthy: for instance, when the
vectorizer is rating a plan, it calls getCastInstrCost with the old
instructions when, in fact, it's trying to evaluate the cost of the
instruction post-vectorization. Thus, the current system can get the
cost of certain casts incorrect as the correct cost can vary greatly
based on the context in which it's used.
For example, if the vectorizer queries getCastInstrCost to evaluate the
cost of a sext(load) with tail predication enabled, getCastInstrCost
will think it's free most of the time, but it's not always free. On ARM
MVE, a VLD2 group cannot be extended like a normal VLDR can. Similar
situations can come up with how masked loads can be extended when being
split.
To fix that, this path adds a new parameter to getCastInstrCost to give
it a hint about the context of the cast. It adds a CastContextHint enum
which contains the type of the load/store being created by the
vectorizer - one for each of the types it can produce.
Original patch by Pierre van Houtryve
Differential Revision: https://reviews.llvm.org/D79162
I've got the report clang11 issues signed/unsigned mismatch
warning here. For some reason only clang11 seems to issue
this warning.
Differential Revision: https://reviews.llvm.org/D83916
This patch enables the LoopVectorizer to build a phi of pointer
type and provide the vector loads and stores with vector type
getelementptrs built from the pointer induction variable, which
produces much less instructions than the previous approach of
creating scalar getelementpointers and glue them together to a
vector.
Differential Revision: https://reviews.llvm.org/D81267
Teaches the SLPVectorizer to use vectorized library functions for
non-intrinsic calls.
This already worked for intrinsics that have vectorized library
functions, thanks to D75878, but schedules with library functions with a
vector variant were being rejected early.
- assume that there are no load/store dependencies between lib
functions with a vector variant; this would otherwise prevent the
bundle from becoming "ready"
- check during legalization that the vector variant can be used
- fix-up where we previously assumed that a call would be an intrinsic
Differential Revision: https://reviews.llvm.org/D82550
This patch fixes D81345 and PR46652.
If a loop with a small trip count is compiled w/o -Os/-Oz, Loop Access Analysis
still generates runtime checks for unit strides that will version the loop.
In such cases, the loop vectorizer should either re-run the analysis or bail-out
from vectorizing the loop, as done prior to D81345. The latter is applied for
now as the former requires refactoring.
Differential Revision: https://reviews.llvm.org/D83470
Currently the DomTree is not kept up to date for additional blocks
generated in the vector loop, for example when vectorizing with
predication. SCEVExpander relies on dominance checks when looking for
existing instructions to re-use and in some cases that can lead to the
expander picking instructions that do not actually dominate their insert
point (e.g. as in PR46525).
Unfortunately keeping the DT up-to-date is a bit tricky, because the CFG
is only patched up after generating code for a block. For now, we can
just use the vector loop header, as this ensures the inserted
instructions dominate all uses in the vector loop. There should be no
noticeable impact on the generated code, as other passes should sink
those instructions, if profitable.
Fixes PR46525.
Reviewers: Ayal, gilr, mkazantsev, dmgreen
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D83288
Summary:
Almost all uses of these iterators, including implicit ones, really
only need the const variant (as it should be). The only exception is
in NewGVN, which changes the order of dominator tree child nodes.
Change-Id: I4b5bd71e32d71b0c67b03d4927d93fe9413726d4
Reviewers: arsenm, RKSimon, mehdi_amini, courbet, rriddle, aartbik
Subscribers: wdng, Prazek, hiraditya, kuhar, rogfer01, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, stephenneuendorffer, Joonsoo, grosul1, vkmr, Kayjukh, jurahul, msifontes, cfe-commits, llvm-commits
Tags: #clang, #mlir, #llvm
Differential Revision: https://reviews.llvm.org/D83087
At the moment this place does not check maximum size set
by TTI and just creates a maximum possible vectors.
Differential Revision: https://reviews.llvm.org/D82227
If a loop is in a function marked OptSize, Loop Access Analysis should refrain
from generating runtime checks for unit strides that will version the loop.
If a loop is in a function marked OptSize and its vectorization is enabled, it
should be vectorized w/o any versioning.
Fixes PR46228.
Differential Revision: https://reviews.llvm.org/D81345
The entries in VectorizableTree are not necessarily ordered by their
position in basic blocks. Collect them and order them by dominance so
later instructions are guaranteed to be visited first. For instructions
in different basic blocks, we only scan to the beginning of the block,
so their order does not matter, as long as all instructions in a basic
block are grouped together. Using dominance ensures a deterministic order.
The modified test case contains an example where we compute a wrong
spill cost (2) without this patch, even though there is no call between
any instruction in the bundle.
This seems to have limited practical impact, .e.g on X86 with a recent
Intel Xeon CPU with -O3 -march=native -flto on MultiSource,SPEC2000,SPEC2006
there are no binary changes.
Reviewers: craig.topper, RKSimon, xbolva00, ABataev, spatel
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D82444
This patch enables the LoopVectorizer to build a phi of pointer
type and provide the vector loads and stores with vector type
getelementptrs built from the pointer induction variable, which
produces much less instructions than the previous approach of
creating scalar getelementpointers and glue them together to a
vector.
Differential Revision: https://reviews.llvm.org/D81267
binop i1 (cmp Pred (ext X, Index0), C0), (cmp Pred (ext X, Index1), C1)
-->
vcmp = cmp Pred X, VecC
ext (binop vNi1 vcmp, (shuffle vcmp, Index1)), Index0
This is a larger pattern than the existing extractelement folds because we can't
reasonably vectorize the sub-patterns with constants based on cost model calcs
(it doesn't usually make sense to replace a single extracted scalar op with
constant operand with a vector op).
I salvaged as much of the existing logic as I could, but there might be better
ways to share and reduce code.
The motivating case from PR43745:
https://bugs.llvm.org/show_bug.cgi?id=43745
...is the special case of a 2-way reduction. We tried to get SLP to handle that
particular pattern in D59710, but that caused crashing and regressions.
This patch is more general, but hopefully safer.
The v2f64 test with SSE2 surprised me - the cost model accounting looks like this:
OldCost = 0 (free extract of f64 at index 0) + 1 (extract of f64 at index 1) + 2 (scalar fcmps) + 1 (and of bools) = 4
NewCost = 2 (vector fcmp) + 1 (shuffle) + 1 (vector 'and') + 1 (extract of bool) = 5
Differential Revision: https://reviews.llvm.org/D82474
This patch adds VPValue version of the GEP's operands to
VPWidenGEPRecipe and uses them during code-generation.
Reviewers: Ayal, gilr, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D80220
Summary:
Get back `const` partially lost in one of recent changes.
Additionally specify explicit qualifiers in few places.
Reviewers: samparker
Reviewed By: samparker
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82383
D68667 introduced a tighter limit to the number of GEPs to simplify
together. The limit was based on the vector element size of the pointer,
but the pointers themselves are not actually put in vectors.
IIUC we try to vectorize the index computations here, so we should base
the limit on the vector element size of the computation of the index.
This restores the test regression on AArch64 and also restores the
vectorization for a important pattern in SPEC2006/464.h264ref on
AArch64 (@test_i16_extend). We get a large benefit from doing a single
load up front and then processing the index computations in vectors.
Note that we could probably even further improve the AArch64 codegen, if
we would do zexts to i32 instead of i64 for the sub operands and then do
a single vector sext on the result of the subtractions. AArch64 provides
dedicated vector instructions to do so. Sketch of proof in Alive:
https://alive2.llvm.org/ce/z/A4xYAB
Reviewers: craig.topper, RKSimon, xbolva00, ABataev, spatel
Reviewed By: ABataev, spatel
Differential Revision: https://reviews.llvm.org/D82418
This saves creating/destroying a builder every time we
perform some transform.
The tests show instruction ordering diffs resulting from
always inserting at the root instruction now, but those
should be benign.
This doesn't change anything currently, but it would make sense
to create a class-level IRBuilder instead of recreating that
everywhere. As we expand to more optimizations, we will probably
also want to hold things like the DataLayout or other constant
refs in here too.
Move ScalarEvolution::forgetLoopDispositions implementation to ScalarEvolution.cpp to remove the dependency.
Add implicit header dependency to source files where necessary.
"error: 'get' is deprecated: The base class version of get with the scalable
argument defaulted to false is deprecated."
Changed VectorType::get() -> FixedVectorType::get().
This emits new IR intrinsic @llvm.get.active.mask for tail-folded vectorised
loops if the intrinsic is supported by the backend, which is checked by
querying TargetTransform hook emitGetActiveLaneMask.
This intrinsic creates a mask representing active and inactive vector lanes,
which is used by the masked load/store instructions that are created for
tail-folded loops. The semantics of @llvm.get.active.mask are described here in
LangRef:
https://llvm.org/docs/LangRef.html#llvm-get-active-lane-mask-intrinsics
This intrinsic is also used to provide a hint to the backend. That is, the
second argument of the intrinsic represents the back-edge taken count of the
loop. For MVE, for example, we use that to set up tail-predication, which is a
new form of predication in MVE for vector loops that implicitely predicates the
last vector loop iteration by implicitely setting active/inactive lanes, i.e.
the tail loop is predicated. In order to set up a tail-predicated vector loop,
we need to know the number of data elements processed by the vector loop, which
corresponds the the tripcount of the scalar loop, which we can now reconstruct
using @llvm.get.active.mask.
Differential Revision: https://reviews.llvm.org/D79100
Generalize scalarization (recently enhanced with D80885)
to allow compares as well as binops.
Similar to binops, we are avoiding scalarization of a loaded
value because that could avoid a register transfer in codegen.
This requires 1 extra predicate that I am aware of: we do not
want to scalarize the condition value of a vector select. That
might also invert a transform that we do in instcombine that
prefers a vector condition operand for a vector select.
I think this is the final step in solving PR37463:
https://bugs.llvm.org/show_bug.cgi?id=37463
Differential Revision: https://reviews.llvm.org/D81661
Have BasicTTI call the base implementation so that both agree on the
default behaviour, which the default being a cost of '1'. This has
required an X86 specific implementation as it seems to be very
reliant on those instructions being free. Changes are also made to
AMDGPU so that their implementations distinguish between cost kinds,
so that the unrolling isn't affected. PowerPC also has its own
implementation to prevent changes to the reg-usage vectorizer test.
The cost model test changes now reflect that ret instructions are not
generally free.
Differential Revision: https://reviews.llvm.org/D79164
getOrCreateTripCount is used to generate code for the outer loop, but it
requires a computable backedge taken counts. Check that in the VPlan
native path.
Reviewers: Ayal, gilr, rengolin, sguggill
Reviewed By: sguggill
Differential Revision: https://reviews.llvm.org/D81088
scalarizeBinop currently folds
vec_bo((inselt VecC0, V0, Index), (inselt VecC1, V1, Index))
->
inselt(vec_bo(VecC0, VecC1), scl_bo(V0,V1), Index)
This patch extends this to account for cases where one of the vec_bo operands is already all-constant and performs similar cost checks to determine if the scalar binop with a constant still makes sense:
vec_bo((inselt VecC0, V0, Index), VecC1)
->
inselt(vec_bo(VecC0, VecC1), scl_bo(V0,extractelt(V1,Index)), Index)
Fixes PR42174
Differential Revision: https://reviews.llvm.org/D80885
Currently extracting a lane for a VPValue def is not supported, if it is
managed directly by VPTransformState (e.g. because it is created by a
VPInstruction or an external VPValue def).
For now, simply extract the requested lane. In the future, we should
also cache the extracted scalar values, similar to LV.
Reviewers: Ayal, rengolin, gilr, SjoerdMeijer
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D80787
LV currently only supports power of 2 vectorization factors, which has
been made explicit with the assertion added in
840450549c.
However, if the widest type is not a power-of-2 the computed MaxVF won't
be a power-of-2 either. This patch updates computeFeasibleMaxVF to
ensure the returned value is a power-of-2 by rounding down to the
nearest power-of-2.
Fixes PR46139.
Reviewers: Ayal, gilr, rengolin
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D80870
relevant aggregate build instructions only (UserCost).
Users are detected with findBuildAggregate routine and the trick is
that following SLP vectorization may end up vectorizing entire list
with smaller chunks. Cost adjustment then is applied for individual
chunks and these adjustments obviously have to be smaller than the
entire aggregate build cost.
Differential Revision: https://reviews.llvm.org/D80773
If it turns out that we can do runtime checks, but there are no
runtime-checks to generate, set RtCheck.Need to false.
This can happen if we can prove statically that the pointers passed in
to canCheckPtrAtRT do not alias. This should not change any results, but
allows us to skip some work and assert that runtime checks are
generated, if LAA indicates that runtime checks are required.
Reviewers: anemet, Ayal
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D79969
Note: This is a recommit of 259abfc7cb,
with some suggested renaming.
David Green