Now that we create the label at the point of the directive, we don't
need to set the "current CV location", and then later when we emit the
next instruction, create a label for it and emit it.
DWARF still defers the labels used in .debug_loc until the next
instruction or value, for reasons unknown.
llvm-svn: 340883
My previoust test case had skipped CUs from one TU out of a two-TU LTO
scenario, which meant the CU index wasn't needed (as it was unambiguous
which CU a table entry applied to) - expanding the test to use 3 TUs,
skipping one (so long as it's not the last one) shows the indexes are
miscomputed. Fix that with a little indirection for the index.
llvm-svn: 340646
Fix a set of related bugs:
* Considering two locations as equivalent when their lines are the same
but their scopes are different causes erroneous debug info that
attributes a commoned call to be attributed to one of the two calls it
was commoned from.
* The previous code to compute a new location's scope was inaccurate and
would use the inlinedAt that was the /parent/ of the inlinedAt that is
the nearest common one, and also used that parent scope instead of the
nearest common scope.
* Not generating new locations generally seemed like a lower quality
choice
There was some risk that generating more new locations could hurt object
size by making more fine grained line table entries, but it looks like
that was offset by the decrease in line table (& address & ranges) size
caused by more accurately computing the scope - which likely lead to
fewer range entries (more contiguous ranges) & reduced size that way.
All up with these changes I saw minor reductions (-1.21%, -1.77%) in
.rela.debug_ranges and .rela.debug_addr (in a fission, compressed debug
info build) as well as other minor size changes (generally reductinos)
across the board (-1.32% debug_info.dwo, -1.28% debug_loc.dwo). Measured
in an optimized (-O2) build of the clang binary.
If you are investigating a size regression in an optimized debug builds,
this is certainly a patch to look into - and I'd be happy to look into
any major regressions found & see what we can do to address them.
llvm-svn: 340583
This patch's test case relies on debug prints which isn't generally an
OK way to test stuff in LLVM and fails whenever asserts aren't enabled.
I've send a heads-up to the commit and detailed comments on the review.
llvm-svn: 340513
In lib/CodeGen/LiveDebugVariables.cpp, it uses std::prev(MBBI) to
get DebugValue's SlotIndex. However, the previous instruction may be
also a debug instruction. It could not use a debug instruction to query
SlotIndex in mi2iMap.
Scan all debug instructions and use the first debug instruction to query
SlotIndex for following debug instructions. Only handle DBG_VALUE in
handleDebugValue().
Differential Revision: https://reviews.llvm.org/D50621
llvm-svn: 340508
This is preparation for landing a use-before-def verifier for debug
intrinsics (D46100).
As a drive-by, remove `tail` from debug intrinsic calls because it
doesn't mean anything in that context.
llvm-svn: 340366
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 340039
In cases where the debugger load time is a worthwhile tradeoff (or less
costly - such as loading from a DWP instead of a variety of DWOs
(possibly over a high-latency/distributed filesystem)) against object
file size, it can be reasonable to disable pubnames and corresponding
gdb-index creation in the linker.
A backend-flag version of this was implemented for NVPTX in
D44385/r327994 - which was fine for NVPTX which wouldn't mix-and-match
CUs. Now that it's going to be a user-facing option (likely powered by
"-gno-pubnames", the same as GCC) it should be encoded in the
DICompileUnit so it can vary per-CU.
After this, likely the NVPTX support should be migrated to the metadata
& the previous flag implementation should be removed.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D50213
llvm-svn: 339939
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 339676
Now we switch to the subregister in expandPostRAPseudos where we already switched the opcode.
This simplifies a few isel patterns that used the pseudo directly. And magically seems to have improved our ability to CSE it in the undef-label.ll test.
llvm-svn: 339496
Changes the default Windows target triple returned by
GetHostTriple.cmake from the old environment names (which we wanted to
move away from) to newer, normalized ones. This also requires updating
all tests to use the new systems names in constraints.
Differential Revision: https://reviews.llvm.org/D47381
llvm-svn: 339307
When using APPLE extensions, don't duplicate the compiler invocation's
flags both in AT_producer and AT_APPLE_flags.
Differential revision: https://reviews.llvm.org/D50453
llvm-svn: 339268
Summary:
The accelerator tables use the debug_str section to store their strings.
However, they do not support the indirect method of access that is
available for the debug_info section (DW_FORM_strx et al.).
Currently our code is assuming that all strings can/will be referenced
indirectly, and puts all of them into the debug_str_offsets section.
This is generally true for regular (unsplit) dwarf, but in the DWO case,
most of the strings in the debug_str section will only be used from the
accelerator tables. Therefore the contents of the debug_str_offsets
section will be largely unused and bloating the main executable.
This patch rectifies this by teaching the DwarfStringPool to
differentiate between strings accessed directly and indirectly. When a
user inserts a string into the pool it has to declare whether that
string will be referenced directly or not. If at least one user requsts
indirect access, that string will be assigned an index ID and put into
debug_str_offsets table. Otherwise, the offset table is skipped.
This approach reduces the overall binary size (when compiled with
-gdwarf-5 -gsplit-dwarf) in my tests by about 2% (debug_str_offsets is
shrunk by 99%).
Reviewers: probinson, dblaikie, JDevlieghere
Subscribers: aprantl, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D49493
llvm-svn: 339122
We don't expect module names to be present in the index. This patch adds
DW_TAG_module to the blacklist.
Differential revision: https://reviews.llvm.org/D50237
llvm-svn: 338878
AArch64 ELF ABI does not define a static relocation type for TLS offset within
a module, which makes it impossible for compiler to generate a valid
DW_AT_location content for thread local variables. Currently LLVM generates an
invalid R_AARCH64_ABS64 relocation at the DW_AT_location field for a TLS
variable. That causes trouble for linker because thread local variable does
not have an absolute address at link time. AArch64 GCC solves the problem by
not generating DW_AT_location for thread local variables. We should do the
same in LLVM.
Differential Revision: https://reviews.llvm.org/D43860
llvm-svn: 338655
Summary:
Added an option that allows to emit only '.loc' and '.file' kind debug
directives, but disables emission of the DWARF sections. Required for
NVPTX target to support profiling. It requires '.loc' and '.file'
directives, but does not require any DWARF sections for the profiler.
Reviewers: probinson, echristo, dblaikie
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46021
llvm-svn: 338616
Getting the DWARF types section is only implemented for ELF object
files. We already disabled emitting debug types in clang (r337717), but
now we also report an fatal error (rather than crashing) when trying to
obtain this section in MC. Additionally we ignore the generate debug
types flag for unsupported target triples.
See PR38190 for more information.
Differential revision: https://reviews.llvm.org/D50057
llvm-svn: 338527
This revision implements support for generating DWARFv5 .debug_addr section.
The implementation is pretty straight-forward: we just check the dwarf version
and emit section header if needed.
Reviewers: aprantl, dblaikie, probinson
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D50005
llvm-svn: 338487
It is necessary to generate fixups in .debug_line as relaxation is
enabled due to the address delta may be changed after relaxation.
DWARF will record the mappings of lines and addresses in
.debug_line section. It will encode the information using special
opcodes, standard opcodes and extended opcodes in Line Number
Program. I use DW_LNS_fixed_advance_pc to encode fixed length
address delta and DW_LNE_set_address to encode absolute address
to make it possible to generate fixups in .debug_line section.
Differential Revision: https://reviews.llvm.org/D46850
llvm-svn: 338477
Builder clang-cmake-armv8-full failed due to the assembly 'comment'
notation is not '#' in the target. So, I use CHECK-SAME to avoid to
check the comment notation in the same line in the test case.
llvm-svn: 338398
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 338390
The test failure was caused by the compiler not emitting a __debug_ranges section with DWARF 4 and
earlier when no ranges are needed. The test checks for the existence regardless.
llvm-svn: 338081
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
llvm-svn: 338039
Summary:
For NVPTX target the value of `DW_AT_frame_base` attribute must be set
to `DW_OP_call_frame_cfa`.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45785
llvm-svn: 338036
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
Differential Revision: https://reviews.llvm.org/D45556
Patch by Hsiangkai Wang.
llvm-svn: 337799
Add a -debugify-export option to opt. This exports per-pass `debugify`
loss statistics to a file in CSV format.
For some interesting numbers on debug value loss during an -O2 build
of the sqlite3 amalgamation, see the review thread.
Differential Revision: https://reviews.llvm.org/D49003
llvm-svn: 337787
The intent is to use it for location list tables as well. Change is almost NFC with the exception
of the spelling of some strings used during dumping (all lowercase now).
Reviewer: JDevlieghere
Differential Revision: https://reviews.llvm.org/D49500
llvm-svn: 337763
Summary:
This patch makes us generate the debug_names section in response to some
user-facing commands (previously it was only generated if explicitly
selected via the -accel-tables option).
My goal was to make this work for DWARF>=5 (as it's an official part of
that standard), and also, as an extension, for DWARF<5 if one is
explicitly tuning for lldb as a debugger (because it brings a large
performance improvement there).
This is slightly complicated by the fact that the debug_names tables are
incompatible with the DWARF v4 type units (they assume that the type
units are in the debug_info section), and unfortunately, right now we
generate DWARF v4-style type units even for -gdwarf-5. For this reason,
I disable all accelerator tables if the user requested type unit
generation. I do this even for apple tables, as they have the same
problem (in fact generating type units for apple targets makes us crash
even before we get around to emitting the accelerator tables).
Reviewers: JDevlieghere, aprantl, dblaikie, echristo, probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49420
llvm-svn: 337544
This prevents gold from printing a warning when trying to export
these symbols via the asan dynamic list after ThinLTO promotes them
from private symbols to external symbols with hidden visibility.
Differential Revision: https://reviews.llvm.org/D49498
llvm-svn: 337428
Since DWARFv5 rnglists are self descriptive and have distinct encodings
for base-relative (offset_pair) and absolute (start_length) entries,
there's no need to use a base address specifier when describing a lone
address range in a section.
Use that, and improve the test coverage a bit here to include cases like
this and others.
llvm-svn: 337411
During the execution of long functions or functions that have a lot of
inlined code it could come to the situation where tracked value could be
transferred from one register to another. The transfer is recognized only if
destination register is a callee saved register and if source register is
killed. We do not salvage caller-saved registers since there is a great
chance that killed register would outlive it.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D44016
llvm-svn: 336978
and no use of DW_FORM_rnglistx with the DW_AT_ranges attribute.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D49214
llvm-svn: 336927
Reid Kleckner