Summary:
The lit test formats use largely the same logic for discovering tests. There are
some superficial differences in the logic, which seem reasonable enough to
handle in a single routine.
At a high level, the common goal is "look for files that end with one of these
suffixes, and skip anything starting with a dot." The balance of the logic
specific to ShTest and GoogleTest collapses quite a bit, so that
getTestsInDirectory is only a couple of lines around a call to the new function.
Reviewers: zturner, MatzeB, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34855
llvm-svn: 306895
This reverts commit da6318a92fba793e4f2447ec478b001392d57d43.
This is causing failures on some build bots due to what appears
to be some kind of lit ordering dependency.
llvm-svn: 306833
Presently lit leaks files in the tests' output directories.
Specifically, if a test creates output files, lit makes no
effort to remove them prior to the next test run. This is
problematic because it leads to false positives whenever a
test passes because stale files were present. In general
it is a source of flakiness that should be removed.
This patch addresses this by building the list of all test
directories that are part of the current run set, and then
deleting those directories and recreating them anew. This
gives each test a clean baseline to start from.
Differential Revision: https://reviews.llvm.org/D34732
llvm-svn: 306832
The style guide states that the explicit `inline`
should not be used with inline methods. classof is
very common inline method with a fair amount on
inconsistency:
$ git grep classof ./include | grep inline | wc -l
230
$ git grep classof ./include | grep -v inline | wc -l
257
I chose to target this method rather the larger change
since this method is easily cargo-culted (I did it at
least once). I considered doing the larger change and
removing all occurrences but that would be a much larger
change.
Differential Revision: https://reviews.llvm.org/D33906
llvm-svn: 306731
Summary:
Provide feedback to users of opt-diff.py, opt-stats.py, and opt-viewer.py,
on how many YAML files have finished being processed, and how many HTML
files have been generated. This feedback is particularly helpful for
opt-viewer.py, which may take a long time to complete when given many
large YAML files as input.
The progress indicators use simple output such as the following:
```
Reading YAML files...
9 of 1197
```
Test plan:
Run `utils/opt-viewer/opt-*.py` on a CentOS and macOS machine, using
Python 3.4 and Python 2.7 respectively, and ensure the output is
formatted well on both.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: simon.f.whittaker, llvm-commits
Differential Revision: https://reviews.llvm.org/D34735
llvm-svn: 306726
Summary:
Minor changes that allow opt-stats.py to support both Python 2 and 3.
In addition to the same dictionary iterator changes that were necessary
in https://reviews.llvm.org/D34564, this diff also:
* Explcitly converts strings to bytes when reading from and writing to stdin
and stdout.
* No longer uses dictionaries as a sort key for optimization remarks.
Dictionary sort order in Python 2 is pretty esoteric anyway, so it's
not clear that the additional sorting had a benefit for end users
(for details, https://stackoverflow.com/a/3484456/679254 is a good
resource on Python 2 dictionary sort order).
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34647
llvm-svn: 306720
Summary:
Change how the output directory is specified when invoking
opt-viewer.py, from `opt-viewer.py yaml_file_one yaml_file_two output_dir` to
`opt-viewer.py -o output_dir yaml_file_one yaml_file_two`.
This makes it easier to pipe the results of another command into
opt-viewer.py. For example:
```
find . -name "*.yaml" -print | xargs /path/to/opt-viewer.py -o html
```
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D34711
llvm-svn: 306694
(Take 2: this patch re-applies r306625, which was reverted in r306629. This
patch includes only trivial fixes.)
In Python2 and Python3, the various (non-)?Unicode string types are sort of
spaghetti. Python2 has unicode support tacked on via the 'unicode' type, which
is distinct from 'str' (which are bytes). Python3 takes the "unicode-everywhere"
approach, with 'str' representing a Unicode string.
Both have a 'bytes' type. In Python3, it is the only way to represent raw bytes.
However, in Python2, 'bytes' is an alias for 'str'. This leads to interesting
problems when an interface requires a precise type, but has to run under both
Python2 and Python3.
The previous logic appeared to be correct in all cases, but went through more
layers of indirection than necessary. This change does the necessary conversions
in one shot, with documentation about which paths might be taken in Python2 or
Python3.
Changes from r306625: some tests just print binary outputs, so in those cases,
fall back to str() in Python3. For googletests, add one missing call to
to_string().
(Tested by verifying the visible breakage with Python3. Verified that everything
works in py2 and py3.)
llvm-svn: 306643
Summary:
In Python2 and Python3, the various (non-)?Unicode string types are sort of
spaghetti. Python2 has unicode support tacked on via the 'unicode' type, which
is distinct from 'str' (which are bytes). Python3 takes the "unicode-everywhere"
approach, with 'str' representing a Unicode string.
Both have a 'bytes' type. In Python3, it is the only way to represent raw bytes.
However, in Python2, 'bytes' is an alias for 'str'. This leads to interesting
problems when an interface requires a precise type, but has to run under both
Python2 and Python3.
The previous logic appeared to be correct in all cases, but went through more
layers of indirection than necessary. This change does the necessary conversions
in one shot, with documentation about which paths might be taken in Python2 or
Python3.
Reviewers: zturner, modocache
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D34793
llvm-svn: 306625
Summary:
This change removes the intermediate 'FileBasedTest' format from lit. This
format is only ever used by the ShTest format, so the logic can be moved into
ShTest directly.
In order to better clarify what the TestFormat subclasses do, I fleshed out the
TestFormat base class with Python's notion of abstract methods, using
@abc.abstractmethod. This gives a convenient way to document the expected
interface, without the risk of instantiating an abstract class (that's what
ABCMeta does -- it raises an exception if you try to instantiate a class which
has abstract methods, but not if you instantiate a subclass that implements
them).
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34792
llvm-svn: 306623
Summary:
The dead code seems to be unreferenced, according to textual search across the
LLVM SVN repo.
The clarification part of this change alters the name of a module-level function
so that it is different from the name of the class-methods that call it.
Currently, there are no erroneous references, but stylistically (c.f. PEP-8),
internal "helper" functions should generally be named accordingly by prepending
an underscore. (I also chose to add '_impl', which isn't necessary, but helps me
at least to mentally disambiguate the interface and implementation functions.)
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34775
llvm-svn: 306600
Add headers for each section of output, with white space and "+++" to
improve readability.
Differential Revision: https://reviews.llvm.org/D34713
llvm-svn: 306492
Summary:
After this patch, we finally have test cases that require multiple
instruction emission.
Depends on D33590
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D33596
llvm-svn: 306388
All patterns reside in a std::vector container, where new variants are added to it using the standard library's emplace_back function.
When calling this with a new element while there is no enough allocated space, a bigger space is allocated and all the old info in the small vector is copied to the newly allocated vector, then the old vector is freed.
The problem is that before doing this "copying", we take a reference of one of the elements in the old vector, and after the "copying" we add it to the new vector.
As the old vector is freed after the copying, the reference now does not point to a valid element.
Added new function to the API of CodeGenDAGPatterns class to return the same information as a copy in order to avoid this issue.
This was revealed in rL305465 that added many patterns and forced the reallocation of the vector which caused crashes in windows bots.
Differential Revision: https://reviews.llvm.org/D34341
llvm-svn: 306371
Summary: Minor changes that allow opt-stats.py to support both Python 2 and 3.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34564
llvm-svn: 306306
Summary:
This patch does a few things that should remove some copies around PatternsToMatch. These were noticed while reviewing code for D34341.
Change constructor to take Dstregs by value and move it into the class. Change one of the callers to add std::move to the argument so that it gets moved.
Make AddPatternToMatch take PatternToMatch by rvalue reference so we can move it into the PatternsToMatch vector. I believe we should have a implicit default move constructor available on PatternToMatch. I chose rvalue reference because both callers call it with temporaries already.
Reviewers: RKSimon, aymanmus, spatel
Reviewed By: aymanmus
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34411
llvm-svn: 306251
Summary:
opt-stats.py and opt-viewer.py's argument parsers both take a positional
argument 'yaml_files'. Positional arguments in Python's argparse module are
required by default, so the subsequent checks for `len(args.yaml_files) == 0`
are unnecessary -- if the length was zero, then the call to
`parser.parse_args()` would have thrown an error already.
Because there is no way for `len(args.yaml_files)` to be zero at these
points, removing the code is NFC.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34567
llvm-svn: 306147
This is patch for GSoC project, bash-completion for clang.
To use this on bash, please run `source clang/utils/bash-autocomplete.sh`.
bash-autocomplete.sh is code for bash-completion.
In this patch, Options.td was mainly changed in order to add value class
in Options.inc.
llvm-svn: 305805
Summary:
As part of this
* Emitted instructions now have named MachineInstr variables associated
with them. This isn't particularly important yet but it's a small step
towards multiple-insn emission.
* constrainSelectedInstRegOperands() is no longer hardcoded. It's now added
as the ConstrainOperandsToDefinitionAction() action. COPY_TO_REGCLASS uses
an alternate constraint mechanism ConstrainOperandToRegClassAction() which
supports arbitrary constraints such as that defined by COPY_TO_REGCLASS.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33590
llvm-svn: 305791
The variant generation for commutative/associative patterns would simply
delete the first output from the list assuming that it was identical to
the original pattern. This does not have to be the case, and a legitimate
variant could actually be removed that way.
llvm-svn: 305556
Summary: We were using the system compiler to run the test suite.
Reviewers: hansw
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34246
llvm-svn: 305525
The dream of a unified check-line auto-generator for all phases of compilation is dead.
The llc script has already diverged to be better at its goal, so having 2 scripts that
do almost the same thing just causes confusion. Now, this script will only work with
opt to produce check lines for IR transforms.
llvm-svn: 305208
Summary:
Python's argparse module includes a `%(default)s` format specifier that
can be used to print the default value of an option in its help text.
Use this for opt-viewer utilities' `--jobs` arguments.
Reviewers: anemet
Reviewed By: anemet
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34081
llvm-svn: 305155
Summary: We aren't actually building the test suite, so this isn't needed.
Reviewers: rengolin, hansw
Reviewed By: rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D29840
llvm-svn: 305017
If there's enough data in fron of it the skipped region would just
become arbitrarily large, and we scan for the CHECK-NOT everywhere.
llvm-svn: 304900
In testing, we've found yet another miscompile caused by the new tables.
And this one is even less clear how to fix (we could teach it to fold
a 16-bit load instead of the 32-bit load it wants, or block folding
entirely).
Also, the approach to excluding instructions seems increasingly to not
scale well.
I have left a more detailed analysis on the review log for the original
patch (https://reviews.llvm.org/D32684) along with suggested path
forward. I will land an additional test case that I wrote which covers
the code that was miscompiling (folding into the output of `pextrw`) in
a subsequent commit to keep this a pure revert.
For each commit reverted here, I've restricted the revert to the
non-test code touching the x86 fold table emission until the last commit
where I did revert the test updates. This means the *new* test cases
added for `insertps` and `xchg` remain untouched (and continue to pass).
Reverted commits:
r304540: [X86] Don't fold into memory operands into insertps in the ...
r304347: [TableGen] Adapt more places to getValueAsString now ...
r304163: [X86] Don't fold away the memory operand of an xchg.
r304123: Don't capture a temporary std::string in a StringRef.
r304122: Resubmit "[X86] Adding new LLVM TableGen backend that ..."
Original commit was in r304088, and after a string of fixes was reverted
previously in r304121 to fix build bots, and then re-landed in r304122.
llvm-svn: 304762
Apparently ::NodeKind is sometimes part of the name in GDB.
Without this patch I get the following error message from GDB:
`Unhandled NodeKind llvm::Twine::NodeKind::EmptyKind`.
Patch by Alexander Richardson!
Differential Revision: https://reviews.llvm.org/D32795
llvm-svn: 304675
on macOS
This function will be used to tie Clang's Integeration tests to a particular
SDK version. See https://reviews.llvm.org/D32178 for more context.
llvm-svn: 304541
insertps behaves differently, the register form selects from an input
register based on the immediate operand while the memory form just loads
the given address. We have custom code to change the immediate in cases
where that's legal, so completely remove insertps from the generated
tables.
llvm-svn: 304540
It tried to detect 9 letters (the length of anonymous) followed by a period. But anonymous classes start with "anonymous_" rather than "anonymous." these days.
llvm-svn: 304387
Internally both these methods just return the result of getValue on either a StringInit or a CodeInit object. In both cases this returns a StringRef pointing to a string allocated in the BumpPtrAllocator so its not going anywhere. So we can just pass that StringRef along.
This is a fairly naive patch that targets just the build failures caused by this change. There's additional work that can be done to avoid creating std::string at call sites that still think getValueAsString returns a std::string. I'll try to clean those up in future patches.
Differential Revision: https://reviews.llvm.org/D33710
llvm-svn: 304325
xchg with a mem operand has different locking semantics. If we unfold it
into a xchg r,r we will loose the implicit lock. Likewise we never want
to fold a register xchg into a memory one as it would be a lot slower.
This triggers during LLVM selfhost.
llvm-svn: 304163
This was reverted due to buildbot breakages and I was not familiar
with this code to investigate it. But while trying to get a
useful backtrace for the author, it turns out the fix was very
obvious. Resubmitting this patch as is, and will submit the
fix in a followup so that the fix is not hidden in the larger
CL.
llvm-svn: 304122
This reverts commit 28cb1003507f287726f43c771024a1dc102c45fe as well
as all subsequent followups. llvm-tblgen currently segfaults with
this change, and it seems it has been broken on the bots all
day with no fixes in preparation. See, for example:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/
llvm-svn: 304121
X86 backend holds huge tables in order to map between the register and memory forms of each instruction.
This TableGen Backend automatically generated all these tables with the appropriate flags for each entry.
Differential Revision: https://reviews.llvm.org/D32684
llvm-svn: 304088
Summary:
For various clang analyzer tests, which were unsupported, I got lit
exceptions, similar to the following:
Exception during script execution:
Traceback (most recent call last):
File "utils/lit/lit/run.py", line 190, in execute_test
result = test.config.test_format.execute(test, lit_config)
File "tools/clang/test/Analysis/analyzer_test.py", line 11, in execute
if result.code == lit.Test.FAIL:
AttributeError: 'tuple' object has no attribute 'code'
This is because executeShTest() in utils/lit/lit/TestRunner.py is
supposed to return a lit.Test.Result object, but in case of unsupported
tests, it returns a plain tuple.
Fix this by returning a properly initialized lit.Test.Result object
instead.
Reviewers: rnk, rafael, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33579
llvm-svn: 303943
The error message that git-llvm script prints out when svn is missing
is very cryptic. I spent a fair amount of time to find what was wrong
with my environment. It looks like many newcomers also exprienced a
hard time to submit their first patches due to this error.
This patch adds a more user-friendly error message.
Differential Revision: https://reviews.llvm.org/D33458
llvm-svn: 303696
Summary:
It's rare but a small number of patterns use IntInit's at the root of the match.
On X86, one such rule is enabled by the OptForSize predicate and causes the
compiler to use the smaller:
%0 = MOV32r1
instead of the usual:
%0 = MOV32ri 1
This patch adds support for matching IntInit's at the root and uses this as a
test case for the optsize attribute that was implemented in r301750
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32791
llvm-svn: 303678
It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
This seems to have been present since the beginning of time,
which is quite surprising. The symptom was this: Suppose you
have a test with a run line that looks like this:
RUN: foo | FileCheck %s
foo prints some output and then due to a bug in the program it
asserts. On Windows this results in the program returning a
negative exit code. But if enough output had been printed
already by the tool so that the FileCheck match would succeed
then FileCheck would return 0, and because of bad logic in
lit this 0 return value would overwrite the failed return
value from previous items in the pipeline. This only happened
with negative exit codes.
The most sensible behavior is to just take whatever the first
exit code is. There is no logical ordering defined on exit
codes, so comparing with < and > does not make a lot of sense.
Instead, as soon as we find the first non-successful return
value, that should be the result of the entire expression.
This fixes the issue, as now tests which fail on non-Windows
platforms also fail for me on Windows as well.
llvm-svn: 303440
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 303259
Summary:
Without this, it's possible to encounter multiple defs for a register.
This is triggered by the current version of D32868 when applied to trunk.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32869
llvm-svn: 303253
When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
llvm-svn: 303240
--This line, and those below, will be igored--
A utils/vscode
A utils/vscode/README
A utils/vscode/tablegen
A utils/vscode/tablegen/.vscode
A utils/vscode/tablegen/.vscode/launch.json
A utils/vscode/tablegen/CHANGELOG.md
A utils/vscode/tablegen/README.md
A utils/vscode/tablegen/language-configuration.json
A utils/vscode/tablegen/package.json
A utils/vscode/tablegen/syntaxes
A utils/vscode/tablegen/syntaxes/TableGen.tmLanguage
A utils/vscode/tablegen/vsc-extension-quickstart.md
llvm-svn: 302553
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
llvm-svn: 302018
If all jobs complete successfully, use pool.close() instead of
pool.terminate() before waiting for the workers. Zach Turner reported
that he was getting "access denied" exceptions from pool.terminate().
Make the workers abort immediately without printing to stderr when they
are interrupted.
Finally, catch exceptions when attempting to remove our temporary
testing directory. On abnormal exit, there can often be open handles
that haven't been cleaned up yet.
llvm-svn: 301941
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
llvm-svn: 301905
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
llvm-svn: 301685
Summary:
`git apply` on Windows doesn't work for files that SVN checks out as
CRLF. There is no way to force SVN to check everything out with Unix
line endings on Windows. Files with svn:eol-style=native will always
come out with CRLF, breaking `git apply`, which wants Unix line endings.
My workaround is to list all files with this property set in the change,
and run `dos2unix` on them. SVN doesn't commit a massive line ending
change because the svn:eol-style property indicates that these are text
files.
Tested on r301245.
Reviewers: zturner, jlebar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32452
llvm-svn: 301262
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
llvm-svn: 301080
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
canMutate() was returning true when the operands were all in the same order as
the matched instruction. However, it wasn't checking the operands were actually
on that instruction. This worked when we could only match a single instruction
but the addition of nested instruction matching led to cases where the operands
could be split across multiple instructions. canMutate() now returns false if
operands belong to instructions other than the root of the match.
llvm-svn: 301077
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
This should fix llvm-clang-x86_64-expensive-checks-win
I reproduced the error using the following code:
namespace llvm {
// Moving this out of the llvm namespace fixes the error.
template<unsigned NumBits> class PredicateBitsetImpl {};
}
namespace {
const unsigned MAX_SUBTARGET_PREDICATES = 11;
// This works on Clang but is broken on MSVC
// using PredicateBitset = PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
// Some versions emit a syntax error here ("error C2061: syntax error: identifier
// 'PredicateBitsetImpl'") but others accept it and only emit the C3646 below.
//
// This works on Clang and MSVC
using PredicateBitset = llvm::PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
class Foo {
private:
PredicateBitset A; // error C3646: 'A': unknown override specifier
};
}
llvm-svn: 300970
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Adds scalable vector machine value types, and updates
the switch statements required for tablegen.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D32018
llvm-svn: 300840
Patch by Ettore Speziale
Allow TableGen to generate static functions to perform GCC/MS builtin name to
target specific intrinsic ID mapping.
https://reviews.llvm.org/D31150
llvm-svn: 300735
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
llvm-svn: 300037
Both pickling errors encountered on clang bots and Darwin compiler-rt
should now be fixed.
This has no impact on testing time on Linux, and on Windows goes from
88s to 63s for 'check'. The tests pass on Mac, but I haven't compared
execution time.
llvm-svn: 299775
This is necessary to pass the lit test suite at llvm/utils/lit/tests.
There are some pre-existing failures here, but now switching to pools
doesn't regress any tests.
I had to change test-data/lit.cfg to import DummyConfig from a module to
fix pickling problems, but I think it'll be OK if we require test
formats to be written in real .py modules outside lit.cfg files.
I also discovered that in some circumstances AsyncResult.wait() will not
raise KeyboardInterrupt in a timely manner, but you can pass a non-zero
timeout to work around this. This makes threading.Condition.wait use a
polling loop that runs through the interpreter, so it's capable of
asynchronously raising KeyboardInterrupt.
llvm-svn: 299605
Summary:
This drastically reduces lit test execution startup time on Windows. Our
previous strategy was to manually create one Process per job and manage
the worker pool ourselves. Instead, let's use the worker pool provided
by multiprocessing. multiprocessing.Pool(jobs) returns almost
immediately, and initializes the appropriate number of workers, so they
can all start executing tests immediately. This avoids the ramp-up
period that the old implementation suffers from. This appears to speed
up small test runs.
Here are some timings of the llvm-readobj tests on Windows using the
various execution strategies:
# multiprocessing.Pool:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-process-pool |& grep real: ; done
real: 0m1.156s
real: 0m1.078s
real: 0m1.094s
# multiprocessing.Process:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-processes |& grep real: ; done
real: 0m6.062s
real: 0m5.860s
real: 0m5.984s
# threading.Thread:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-threads |& grep real: ; done
real: 0m9.438s
real: 0m10.765s
real: 0m11.079s
I kept the old code to launch processes in case this change doesn't work
on all platforms that LLVM supports, but at some point I would like to
remove both the threading and old multiprocessing execution strategies.
Reviewers: modocache, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31677
llvm-svn: 299560
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
llvm-svn: 299433
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
This is needed by TestCases/Posix/coverage-direct.cc
The problem is that the test does:
mkdir <dir>
cd <dir>
cd ..
rm -rf <dir>
<more commands>
the current directory currently looks like "/.../<dir>/../" which
doesn't exist when dir is deleted.
at some point we should probably switch to using the os current
directory (specially if we want to add subshell), but this is a small
incremental improvement.
llvm-svn: 299113
This adds support for commands like
FileCheck < foobar*
which is used by some asan tests because the file they want to read
has a pid in the name.
llvm-svn: 299111
Functions that still return Expected<X> are now called createAndImport*()
Changing the return type was requested in the review comments for r299001
llvm-svn: 299063
Summary:
But don't actually inspect the tree any deeper than we already do. This
change is NFC but the next one will enable full traversal of the
source/destination patterns.
Depends on D30535
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, rovka, ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30536
llvm-svn: 299001
This patch enables schedulers to specify instructions that
cannot be issued with any other instructions.
It also fixes BeginGroup/EndGroup.
Reviewed by: Andrew Trick
Differential Revision: https://reviews.llvm.org/D30744
llvm-svn: 298885
When using -debug with -gen-register-info, tablegen will crash when
trying to print a name of a non-native register unit. This patch only
affects the debug information generated while running llvm-tblgen,
and has no impact on the compilable code coming out of it.
llvm-svn: 298875
Summary:
The categories are emitted in a strange order in this patch due to a bug in the
CommandLine library.
Reviewers: ab
Reviewed By: ab
Subscribers: ab, llvm-commits
Differential Revision: https://reviews.llvm.org/D30995
llvm-svn: 298843
Do not force the backends to use target name as namespace.
Original patch by Mattias Eriksson
Reviewers: stoklund, craig.topper
Reviewed By: stoklund
Subscribers: materi, llvm-commits
Differential Revision: https://reviews.llvm.org/D31322
llvm-svn: 298834
This is another step towards implementing register classes with
parametrized register/spill sizes and value types.
This is an updated version of r298652. The difference is that MCRegister-
Class still contains register size, available as getPhysRegSize(). The
old function getSize was retained as a temporary measure to avoid build
breakage for out-of-tree targets.
llvm-svn: 298739
Summary:
This script will automatically create a new stable merge request bug in
bugzilla for the given svn revision and release number.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30905
llvm-svn: 298705
This is another step towards implementing register classes with
parametrized register/spill sizes.
Differential Revision: https://reviews.llvm.org/D31299
llvm-svn: 298652
Summary: Add tests for all atomic operations for powerpc64le, so that all changes can be easily examined.
Reviewers: kbarton, hfinkel, echristo
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D31285
llvm-svn: 298614
Summary:
`assert.assertItemEqual` went away in Python 3. Seeing how lists
are ordered, comparing a list against each other should work just
as well.
Patch by @jbergstroem (Johan Bergström).
Reviewers: modocache, gparker42
Reviewed By: modocache
Differential Revision: https://reviews.llvm.org/D31229
llvm-svn: 298479
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
These are needed due to some obscure rules in the standard
about how std::vector selects between copy and move
constructors, which can cause a conforming implementation
to attempt to select the copy constructor of RuleMatcher,
which will fail since std::unique_ptr<> isn't copyable.
llvm-svn: 298294
Summary:
Prepare the way for nested instruction matching support by having actions
like CopyRenderer look up operands in the RuleMatcher rather than a
specific InstructionMatcher. This allows actions to reference any operand
from any matched instruction.
It works by checking the 'shape' of the match and capturing
each matched instruction to a local variable. If the shape is wrong
(not enough operands, leaf nodes where non-leafs are expected, etc.), then
the rule exits early without checking the predicates. Once we've captured
the instructions, we then test the predicates as before (except using the
local variables). If the match is successful, then we render the new
instruction as before using the local variables.
It's not noticable in this patch but by the time we support multiple
instruction matching, this patch will also cause a significant improvement
to readability of the emitted code since
MRI.getVRegDef(I->getOperand(0).getReg()) will simply be MI1 after
emitCxxCaptureStmts().
This isn't quite NFC because I've also fixed a bug that I'm surprised we
haven't encountered yet. It now checks there are at least the expected
number of operands before accessing them with getOperand().
Depends on D30531
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: rovka
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30535
llvm-svn: 298257
Extend script for auto-generating CHECK lines so that it works for SystemZ.
This is a pre-commit for the new tests resulting from
https://reviews.llvm.org/D29489
llvm-svn: 298048
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Currently we don't enforce that ISD::ANY_EXTEND, ZERO_EXTEND, SIGN_EXTEND, TRUNC, FP_ROUND, FP_EXTEND have the same number of elements(including scalar) between their input and output. Though we have them documented as such. Up until a few months ago x86 created nodes that violated this rule. That's all been fixed now, and we should enforce the rule going forward.
In order to do this we need to allow SDTCisSameNumEltsAs to support scalar types and not enforce being a vector. If one type is scalar we will force the other type to also be scalar.
Differential Revision: https://reviews.llvm.org/D30878
llvm-svn: 297648
There were some issues in the implementation of enumerate()
preventing it from being used in various contexts. These were
all related to the fact that it did not supporter llvm's
iterator_facade_base class. So this patch adds support for that
and additionally exposes a new helper method to_vector() that
will evaluate an entire range and store the results in a
vector.
Differential Revision: https://reviews.llvm.org/D30853
llvm-svn: 297633
This reverts r297596.
There were other issues that were making this not work that have been fixed now. Reverting this results in a more accurate table.
llvm-svn: 297602
This exposed that we have several intrinsic instructions that have identical TSFlags to other instructions. We should merge their patterns and kill of the duplicate. I'll fix that in a follow up patch.
llvm-svn: 297596
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
llvm-svn: 297396
SelectCode has been returning nullptr since 182dac0 ("SDAG: Make
SelectCodeCommon return void", 2016-05-10). Make SelectCode also
return void instead, as all callers have been updated.
Patch by Sven van Haastregt.
Review: https://reviews.llvm.org/D30497
llvm-svn: 297377
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
X86EvexToVex machine instruction pass compresses EVEX encoded instructions by replacing them with their identical VEX encoded instructions when possible.
It uses manually supported 2 large tables that map the EVEX instructions to their VEX ideticals.
This TableGen backend replaces the tables by automatically generating them.
Differential Revision: https://reviews.llvm.org/D30451
llvm-svn: 297127
This will enable removing hacks throughout the codebase
in clang and compiler-rt that feed multiple inputs to a
testing utility by globbing, all of which are either disabled
on Windows currently or using xargs / find hacks.
Differential Revision: https://reviews.llvm.org/D30380
llvm-svn: 296904
This tool allows generating the different between two optimization record
files. The result is a YAML file too that can be visualized with opt-viewer.
This is very useful to see what optimization were added and removed by a
change.
llvm-svn: 296767
We used to exclude arguments but for a diffed YAML file, it's interesting to
show these as changes.
Turns out this also affects gvn/LoadClobbered because we used to squash
multiple entries of this on the same line even if they reported clobbers
by *different* instructions. This increases the number of unique entries now
and the share of gvn/LoadClobbered.
Total number of remarks 902287
Top 10 remarks by pass:
inline 43%
gvn 37%
licm 11%
loop-vectorize 4%
asm-printer 3%
regalloc 1%
loop-unroll 1%
inline-cost 0%
slp-vectorizer 0%
loop-delete 0%
Top 10 remarks:
gvn/LoadClobbered 33%
inline/Inlined 16%
inline/CanBeInlined 14%
inline/NoDefinition 7%
licm/Hoisted 6%
licm/LoadWithLoopInvariantAddressInvalidated 5%
gvn/LoadElim 3%
asm-printer/InstructionCount 3%
inline/TooCostly 2%
loop-vectorize/MissedDetails 2%
llvm-svn: 296766
__getattr__ does not work well with debugging. If the attribute function has
a run-time error, a missing attribute is reported instead.
llvm-svn: 296765
I am planning to use this tool to find too noisy (missed) optimization
remarks. Long term it may actually be better to just have another tool that
exports the remarks into an sqlite database and perform queries like this in
SQL.
This splits out the YAML parsing from opt-viewer.py into a new Python module
optrecord.py.
This is the result of the script on the LLVM testsuite:
Total number of remarks 714433
Top 10 remarks by pass:
inline 52%
gvn 24%
licm 13%
loop-vectorize 5%
asm-printer 3%
loop-unroll 1%
regalloc 1%
inline-cost 0%
slp-vectorizer 0%
loop-delete 0%
Top 10 remarks:
gvn/LoadClobbered 20%
inline/Inlined 19%
inline/CanBeInlined 18%
inline/NoDefinition 9%
licm/LoadWithLoopInvariantAddressInvalidated 6%
licm/Hoisted 6%
asm-printer/InstructionCount 3%
inline/TooCostly 3%
gvn/LoadElim 3%
loop-vectorize/MissedDetails 2%
Beside some refactoring, I also changed optrecords not to use context to
access global data (max_hotness). Because of the separate module this would
have required splitting context into two. However it's not possible to access
the optrecord context from the SourceFileRenderer when calling back to
Remark.RelativeHotness.
llvm-svn: 296682
If there's some reason not to do this, feel free to revert and/or fix, but
for the cases I'm looking at, the script appears to do fine for these targets.
llvm-svn: 296181
Extra const in the StringRef argument meant that MSVC complained about it not correctly overriding from OperandPredicateMatcher::emitCxxPredicateExpr (which didn't have the const)
llvm-svn: 296138
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The 'Kind' member used in RTTI for InstructionPredicateMatcher was not
initialized but went undetected since I always ended up with the correct value.
llvm-svn: 296126
Summary:
This makes more important rules have priority over less important rules.
For example, '%a = G_ADD $b:s64, $c:s64' has priority over
'%a = G_ADD $b:s32, $c:s32'. Previously these rules were emitted in the
correct order by chance.
NFC in this patch but it is required to make the next patch work correctly.
Depends on D29710
Reviewers: t.p.northover, ab, qcolombet, aditya_nandakumar, rovka
Reviewed By: ab, rovka
Subscribers: javed.absar, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29711
llvm-svn: 296121
clang will generate IR like this for input using packed bitfields;
very simple semantically, but it's a bit tricky to actually
generate good code.
llvm-svn: 296080
Summary:
Each OperandPredicateMatcher shouldn't need to know how to generate the expression
to reference a MachineOperand. The OperandMatcher should provide it.
In addition to separating responsibilities, this also lays some groundwork for
decoupling source patterns from destination patterns to allow invented operands
or operands provided by GlobalISel's equivalent to the ComplexPattern<> class.
Depends on D29709
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D29710
llvm-svn: 295668
Summary:
In the near future the rules will be sorted between these two steps to
ensure that more important rules are not prevented by less important ones.
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29709
llvm-svn: 295661
Add WIG value to all of AVX instructions which ignore the W-bit in their encoding, instead of giving them the default value of 0.
This patch is needed for a follow up work on EVEX2VEX pass (replacing EVEX encoded instructions with their corresponding VEX version when possible).
Differential Revision: https://reviews.llvm.org/D29876
llvm-svn: 295643
Syntax highlighting has been done line-at-a-time. Done this way, the lexer
resets the context at each line, distorting the formatting.
This change will render the whole file at once and feed the highlighted text
line-at-a-time to be wrapped by the SourceFileRenderer.
Leading/trailing newlines were being ignored by Pygments but since each line
was rendered in its own row, it didn't matter. This bug was masked by the
line-at-a-time algorithm. So now we need to add "stripnl=False" to the
CppLexer to change its behavior to match the expectation.
llvm-svn: 295546
To help assist in debugging ISEL or to prioritize GlobalISel backend
work, this patch adds two more tables to <Target>GenISelDAGISel.inc -
one which contains the patterns that are used during selection and the
other containing include source location of the patterns
Enabled through CMake varialbe LLVM_ENABLE_DAGISEL_COV
llvm-svn: 295081
This allows for nicer backtrace and debugging when -j1 is passed:
$ opt-viewer.py CMakeFiles/LLVMScalarOpts.dir/LoopVersioningLICM.cpp.opt.yaml html
Traceback (most recent call last):
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 405, in <module>
generate_report(pmap, all_remarks, file_remarks, args.source_dir, args.output_dir)
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 362, in generate_report
pmap(_render_file_bound, file_remarks.items())
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/multiprocessing/pool.py", line 251, in map
return self.map_async(func, iterable, chunksize).get()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/multiprocessing/pool.py", line 567, in get
raise self._value
Exception: blah
$ opt-viewer.py -j 1 CMakeFiles/LLVMScalarOpts.dir/LoopVersioningLICM.cpp.opt.yaml html
Traceback (most recent call last):
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 405, in <module>
generate_report(pmap, all_remarks, file_remarks, args.source_dir, args.output_dir)
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 362, in generate_report
pmap(_render_file_bound, file_remarks.items())
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 317, in _render_file
SourceFileRenderer(source_dir, output_dir, filename).render(remarks)
File "/org/llvm/utils/opt-viewer/opt-viewer.py", line 168, in __init__
raise Exception("blah")
Exception: blah
llvm-svn: 295080
Summary: Small fix to HtmlFormatter, defaults to ascii encoding, so utf-8 output may get `UnicodeEncodeError: 'ascii' codec can't encode character ... ordinal not in range(128)` during write.
Patch by Brian Cain!
Reviewers: anemet, fhahn
Reviewed By: anemet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29802
llvm-svn: 294710
Instead of emitting the matcher code directly, return the rule matcher
and the skip reason as an Expected<RuleMatcher>.
This will let us record all matchers and process them before emission.
It's a somewhat unconventional use of Error, but it's nicer than, say,
std::pair, because of the bool conversions.
Differential Revision: https://reviews.llvm.org/D29743
llvm-svn: 294706
Inside an alias group, when ordering instruction aliases, we rely
on the priority field to sort them.
When the priority is not set or more generally when there is a tie between
two aliases, we used to rely on the lexicographic order. However, this
order can change for the anonymous records when more instruction, intrinsic,
etc. are inserted.
For instance, given two anonymous records r1 and r2 with respective name
A_999 and A_1000, their lexicography order will be r2 then r1. Now, if
an instruction is added before them, their name will become respectively
A_1000 and A_1001, thus the lexicography order will be r1 then r2, i.e.,
it changed.
If that happens in an alias group, the assembly output would prefer a
different alias for no apparent good reasons.
A way to fix that is to use proper priority for all aliases, but we
can also make the tie breaker comparison smarter and use a deterministic
ordering. This is what this patch does.
llvm-svn: 294695
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Passing the --restrict flag to the coverage prep script before other
positional arguments is wrong, because it prevents the argparse module
from telling apart arguments to --restrict versus positional arguments.
Pointed out by Sean Callanan!
llvm-svn: 294616
In r293373 we switched the build to linking dynamically against the
Universal CRT and include the redistributables in the installer.
However, clang-format.exe is copied into the vsix and needs to be
statically linked. This commit makes us build the plugin in a separate
step that uses static linking.
llvm-svn: 294513
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
Refactor a helper function, FactorNodes, to search for a push node in constant space. This resolves a problem in a not-yet-upstreamed backend where a recursive pattern blew the call stack (at a depth of 255) under a debug build of tablegen. No functional change so no new test coverage. The change is minimal to avoid disturbing existing behaviour.
Differential Revision: https://reviews.llvm.org/D29080
llvm-svn: 294230
Building lld is enabled by default, but it can be disabled using the
-no-lld option.
Reviewers: tstellarAMD, rengolin, hans
Reviewed By: hans
Subscribers: grosser, wdng, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D29539
llvm-svn: 294102
This lets us split out PatternToMatch from the top-level RuleMatcher,
where it doesn't really belong. That, in turn, lets us eventually
generate RuleMatchers from non-SelectionDAG sources.
llvm-svn: 294076
Use the qualified name for StringLiteral (llvm::StringLiteral) when
generating the sources. This is needed as the generated files may be
used out-of-tree (e.g. swift) where you may not have a
`using namespace llvm;` resulting in an undefined lookup.
llvm-svn: 293577
Tablegen emitted a warning when the fast isel emitter created dead
code by emitting a pattern that has no predicate before a pattern
that has one.
This should be an error but was originally only a warning because the X86
backend had a buggy definition that unintentionally caused this to be hit
(PR21575). That has been fixed a while ago (r222094), so it's safe to
upgrade the warning to an error.
llvm-svn: 293534
Summary:
AMDGPU has two register classes with the same set of registers, and this
was causing this tablegen backend would get stuck in infinite recursion.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: tpr, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29049
llvm-svn: 293483
In order to make sure that LLVM continues to work on machines that do not have the Universal CRT yet,
we'll need to ship a copy of UCRT in the Windows installation package. Fortunately, CMake 3.6+ already
supports app-local deployment of UCRT dlls, we just need to turn this on.
Differential Revision: https://reviews.llvm.org/D29146
llvm-svn: 293373
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
This is causing problems because the rendering of the text will depend on
varying global state to show relative hotness or a link in the inlining
context.
llvm-svn: 293265
Summary:
Put opt-viewer critical items in parallel
Patch by Brian Cain!
Requires features from Python 2.7
**Performance**
Below are performance results across various configurations. These were taken on an i5-5200U (dual core + HT). They were taken with a small subset of the YAML output of building Python 3.6.0b3 with LTO+PGO. 60 YAML files.
"multiprocessing" is the current submission contents. "baseline" is as of 544f14c6b2a07a94168df31833dba9dc35fd8289 (I think this is aka r287505).
"ImportError" vs "class<...CLoader>" below are just confirming the expected configuration (with/without CLoader).
The below was measured on AMD A8-5500B (4 cores) with 224 input YAML files, showing a ~1.75x speed increase over the baseline with libYAML. I suspect it would scale well on high-end servers.
```
**************************************** MULTIPROCESSING ****************************************
PyYAML:
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: cannot import name CLoader
Python 2.7.10
489.42user 5.53system 2:38.03elapsed 313%CPU (0avgtext+0avgdata 400308maxresident)k
0inputs+31392outputs (0major+473540minor)pagefaults 0swaps
PyYAML+libYAML:
<class 'yaml.cyaml.CLoader'>
Python 2.7.10
78.69user 5.45system 0:32.63elapsed 257%CPU (0avgtext+0avgdata 398560maxresident)k
0inputs+31392outputs (0major+542022minor)pagefaults 0swaps
PyPy/PyYAML:
Traceback (most recent call last):
File "<builtin>/app_main.py", line 75, in run_toplevel
File "<builtin>/app_main.py", line 601, in run_it
File "<string>", line 1, in <module>
ImportError: cannot import name 'CLoader'
Python 2.7.9 (2.6.0+dfsg-3, Jul 04 2015, 05:43:17)
[PyPy 2.6.0 with GCC 4.9.3]
154.27user 8.12system 0:53.83elapsed 301%CPU (0avgtext+0avgdata 627960maxresident)k
808inputs+30376outputs (0major+727994minor)pagefaults 0swaps
**************************************** BASELINE ****************************************
PyYAML:
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: cannot import name CLoader
Python 2.7.10
358.08user 4.05system 6:08.37elapsed 98%CPU (0avgtext+0avgdata 315004maxresident)k
0inputs+31392outputs (0major+85252minor)pagefaults 0swaps
PyYAML+libYAML:
<class 'yaml.cyaml.CLoader'>
Python 2.7.10
50.32user 3.30system 0:56.59elapsed 94%CPU (0avgtext+0avgdata 307296maxresident)k
0inputs+31392outputs (0major+79335minor)pagefaults 0swaps
PyPy/PyYAML:
Traceback (most recent call last):
File "<builtin>/app_main.py", line 75, in run_toplevel
File "<builtin>/app_main.py", line 601, in run_it
File "<string>", line 1, in <module>
ImportError: cannot import name 'CLoader'
Python 2.7.9 (2.6.0+dfsg-3, Jul 04 2015, 05:43:17)
[PyPy 2.6.0 with GCC 4.9.3]
72.94user 5.18system 1:23.41elapsed 93%CPU (0avgtext+0avgdata 455312maxresident)k
0inputs+30392outputs (0major+110280minor)pagefaults 0swaps
```
Reviewers: fhahn, anemet
Reviewed By: anemet
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26967
llvm-svn: 293261
I think the initial version of r293172 was trying:
std::forward<Args...>(args)...
which doesn't compile. This seems like the correct way:
std::forward<Args>(args)...
llvm-svn: 293214
Summary:
This should make it possible to easily add everything needed to import all
the existing SelectionDAG rules. It should also serve the likely
kinds of GlobalISel rules (some of which are not currently representable
in SelectionDAG) once we've nailed down the tablegen definition for that.
The hierarchy is as follows:
MatcherRule - A matching rule. Currently used to emit C++ ISel code but will
| also be used to emit test cases and tablegen definitions in the
| near future.
|- Instruction(s) - Represents the instruction to be matched.
|- Instruction Predicate(s) - Test the opcode, arithmetic flags, etc. of an
| instruction.
\- Operand(s) - Represents a particular operand of the instruction. In the
| future, there may be subclasses to test the same predicates
| on multiple operands (including for variadic instructions).
\ Operand Predicate(s) - Test the type, register bank, etc. of an operand.
This is where the ComplexPattern equivalent
will be represented. It's also
nested-instruction matching will live as a
predicate that follows the DefUse chain to the
Def and tests a MatcherRule from that position.
Support for multiple instruction matchers in a rule has been retained from
the existing code but has been adjusted to assert when it is used.
Previously it would silently drop all but the first instruction matcher.
The tablegen-erated file is not functionally changed but has more
parentheses and no longer attempts to format the if-statements since
keeping track of the indentation is tricky in the presence of the matcher
hierarchy. It would be nice to have CMakes tablegen() run the output
through clang-format (when available) so we don't have to complicate
TableGen with pretty-printing.
It's also worth mentioning that this hierarchy will also be able to emit
TableGen definitions and test cases in the near future. This is the reason
for favouring explicit emit*() calls rather than the << operator.
Reviewers: aditya_nandakumar, rovka, t.p.northover, qcolombet, ab
Reviewed By: ab
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D28942
llvm-svn: 293172
and UNSUPPORTED"
After r292904 llvm-lit fails to emit the test results in the XML format for
Apple's internal buildbots.
rdar://30164800
llvm-svn: 292942
A `lit` condition line is now a comma-separated list of boolean expressions.
Comma-separated expressions act as if each expression were on its own
condition line:
For REQUIRES, if every expression is true then the test will run.
For UNSUPPORTED, if every expression is false then the test will run.
For XFAIL, if every expression is false then the test is expected to succeed.
As a special case "XFAIL: *" expects the test to fail.
Examples:
# Test is expected fail on 64-bit Apple simulators and pass everywhere else
XFAIL: x86_64 && apple && !macosx
# Test is unsupported on Windows and on non-Ubuntu Linux
# and supported everywhere else
UNSUPPORTED: linux && !ubuntu, system-windows
Syntax:
* '&&', '||', '!', '(', ')'. 'true' is true. 'false' is false.
* Each test feature is a true identifier.
* Substrings of the target triple are true identifiers for UNSUPPORTED
and XFAIL, but not for REQUIRES. (This matches the current behavior.)
* All other identifiers are false.
* Identifiers are [-+=._a-zA-Z0-9]+
Differential Revision: https://reviews.llvm.org/D18185
llvm-svn: 292904
A `lit` condition line is now a comma-separated list of boolean expressions.
Comma-separated expressions act as if each expression were on its own
condition line:
For REQUIRES, if every expression is true then the test will run.
For UNSUPPORTED, if every expression is false then the test will run.
For XFAIL, if every expression is false then the test is expected to succeed.
As a special case "XFAIL: *" expects the test to fail.
Examples:
# Test is expected fail on 64-bit Apple simulators and pass everywhere else
XFAIL: x86_64 && apple && !macosx
# Test is unsupported on Windows and on non-Ubuntu Linux
# and supported everywhere else
UNSUPPORTED: linux && !ubuntu, system-windows
Syntax:
* '&&', '||', '!', '(', ')'. 'true' is true. 'false' is false.
* Each test feature is a true identifier.
* Substrings of the target triple are true identifiers for UNSUPPORTED
and XFAIL, but not for REQUIRES. (This matches the current behavior.)
* All other identifiers are false.
* Identifiers are [-+=._a-zA-Z0-9]+
Differential Revision: https://reviews.llvm.org/D18185
llvm-svn: 292896
Running lit tests and unit tests of ASan and TSan on macOS has very bad performance when running with a high number of threads. This is caused by xnu (the macOS kernel), which currently doesn't handle mapping and unmapping of sanitizer shadow regions (reserved VM which are several terabytes large) very well. The situation is so bad that increasing the number of threads actually makes the total testing time larger. The macOS buildbots are affected by this. Note that we can't easily limit the number of sanitizer testing threads without affecting the rest of the tests.
This patch adds a special "group" into lit, and limits the number of concurrently running tests in this group. This helps solve the contention problem, while still allowing other tests to run in full, that means running lit with -j8 will still with 8 threads, and parallelism is only limited in sanitizer tests.
Differential Revision: https://reviews.llvm.org/D28420
llvm-svn: 292548
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
Summary:
This change equips lit.py with two new options, --num-shards=M and
--run-shard=N (set by default from env vars LIT_NUM_SHARDS and LIT_RUN_SHARD).
The options must be used together, and N must be in 1..M.
Together these options effect only test selection: they partition the testsuite
into M equal-sized "shards", then select only the Nth shard. They can be used
in a cluster of test machines to achieve a very crude (static) form of
parallelism, with minimal configuration work.
Reviewers: modocache, ddunbar
Reviewed By: ddunbar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28789
llvm-svn: 292417
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
This patch fixes bugzilla 31576 (https://llvm.org/bugs/show_bug.cgi?id=31576).
"data32" instruction prefix was not defined in the llvm.
An exception had to be added to the X86 tablegen and AsmPrinter because both "data16" and "data32" are encoded to 0x66 (but in different modes).
Differential Revision: https://reviews.llvm.org/D28468
llvm-svn: 292352
Summary: The parameter `input` to `subprocess.Popen.communicate(...)` must be an object of type `bytes` . This is strictly enforced in python3. This patch (1) allows `to_bytes` to be safely called redundantly. (2) Explicitly convert `input` within `executeCommand`. This allows for usages like `executeCommand(['clang++', '-'], input='int main() {}\n')`.
Reviewers: ddunbar, BinaryKhaos, modocache, dim, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28736
llvm-svn: 292308
Running lit tests and unit tests of ASan and TSan on macOS has very bad performance when running with a high number of threads. This is caused by xnu (the macOS kernel), which currently doesn't handle mapping and unmapping of sanitizer shadow regions (reserved VM which are several terabytes large) very well. The situation is so bad that increasing the number of threads actually makes the total testing time larger. The macOS buildbots are affected by this. Note that we can't easily limit the number of sanitizer testing threads without affecting the rest of the tests.
This patch adds a special "group" into lit, and limits the number of concurrently running tests in this group. This helps solve the contention problem, while still allowing other tests to run in full, that means running lit with -j8 will still with 8 threads, and parallelism is only limited in sanitizer tests.
Differential Revision: https://reviews.llvm.org/D28420
llvm-svn: 292231
This allows us to use bin/llvm-lit to run individual libc++ and
libc++abi tests without having to explicitly specify the site config
paths, similar to other projects.
Differential Revision: https://reviews.llvm.org/D28733
llvm-svn: 292203
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
We were frequently checking for a list of types and the different types
conveyed no real information. So lump them together explicitly.
llvm-svn: 292095
Correct handling of the following FileCheck options is implemented in
update_llc_test_checks.py and update_test_checks.py scripts:
1) -check-prefix (with a single dash)
2) -check-prefixes (with multiple prefixes)
Differential Revision: https://reviews.llvm.org/D28572
llvm-svn: 292008
Summary:
libstdc++ has some undefined behavior in bits/stl_tree.h that
has recently became excercised by some of the LLVM code.
Given that fixing libstdc++ will take years, adding the file
into a blacklist to fix bots seems like a necessity.
Reviewers: vitalybuka
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28686
llvm-svn: 291918
handle generic ranges by using std::begin and std::end rather than
requiring things to look exactly like an STL container.
Much of the credit for this goes to Dave Blaikie who helped me figure
out the right incantations.
This will probably be re-designed when I send this to the maintainers of
gmock, so I've instead structured it to change is little as possible
while it is a local patch. That makes it somewhat ugly, but I think a focused
change is better for getting this to work for LLVM today and letting the
upstream maintainers figure out the correct long-term pattern.
Differential Revision: https://reviews.llvm.org/D28288
llvm-svn: 291623
I have two immediate motivations for adding this:
1) It makes writing expectations in tests *dramatically* easier. A
quick example that is a taste of what is possible:
std::vector<int> v = ...;
EXPECT_THAT(v, UnorderedElementsAre(1, 2, 3));
This checks that v contains '1', '2', and '3' in some order. There
are a wealth of other helpful matchers like this. They tend to be
highly generic and STL-friendly so they will in almost all cases work
out of the box even on custom LLVM data structures.
I actually find the matcher syntax substantially easier to read even
for simple assertions:
EXPECT_THAT(a, Eq(b));
EXPECT_THAT(b, Ne(c));
Both of these make it clear what is being *tested* and what is being
*expected*. With `EXPECT_EQ` this is implicit (the LHS is expected,
the RHS is tested) and often confusing. With `EXPECT_NE` it is just
not clear. Even the failure error messages are superior with the
matcher based expectations.
2) When testing any kind of generic code, you are continually defining
dummy types with interfaces and then trying to check that the
interfaces are manipulated in a particular way. This is actually what
mocks are *good* for -- testing *interface interactions*. With
generic code, there is often no "fake" or other object that can be
used.
For a concrete example of where this is currently causing significant
pain, look at the pass manager unittests which are riddled with
counters incremented when methods are called. All of these could be
replaced with mocks. The result would be more effective at testing
the code by having tighter constraints. It would be substantially
more readable and maintainable when updating the code. And the error
messages on failure would have substantially more information as
mocks automatically record stack traces and other information *when
the API is misused* instead of trying to diagnose it after the fact.
I expect that #1 will be the overwhelming majority of the uses of gmock,
but I think that is sufficient to justify having it. I would actually
like to update the coding standards to encourage the use of matchers
rather than any other form of `EXPECT_...` macros as they are IMO
a strict superset in terms of functionality and readability.
I think that #2 is relatively rarely useful, but there *are* cases where
it is useful. Historically, I think misuse of actual mocking as
described in #2 has led to resistance towards this framework. I am
actually sympathetic to this -- mocking can easily be overused. However
I think this is not a significant concern in LLVM. First and foremost,
LLVM has very careful and rare exposure of abstract interfaces or
dependency injection, which are the most prone to abuse with mocks. So
there are few opportunities to abuse them. Second, a large fraction of
LLVM's unittests are testing *generic code* where mocks actually make
tremendous sense. And gmock is well suited to building interfaces that
exercise generic libraries. Finally, I still think we should be willing
to have testing utilities in tree even if they should be used rarely. We
can use code review to help guide the usage here.
For a longer and more complete discussion of this, see the llvm-dev
thread here:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/108672.html
The general consensus seems that this is a reasonable direction to start
down, but that doesn't mean we should race ahead and use this
everywhere. I have one test that is blocked on this to land and that was
specifically used as an example. Before widespread adoption, I'm going
to work up some (brief) guidelines as some of these facilities should be
used sparingly and carefully.
Differential Revision: https://reviews.llvm.org/D28156
llvm-svn: 291606
Summary:
Prior to this change, phi nodes were never considered defs, and so we ended up with undefined variables for any loop. Now, instead of trying to find just defs, we iterate over each actual IR value in the line, and replace them one by one with either a definition or a use.
We also don't try to match anything in the comment portions of the line.
I've tested it even on things like function pointer calls, etc, and against existing test cases uses update_test_checks
With this change, we are able to use update_tests on the cyclic cases in newgvn.
The only case i'm aware of that will misfire is if you have a string with which contains a valid token.
However, this is the same as it is now, with a slightly larger set of strings that may misfire.
Prior to this change, a test with the string " %a =" would be replaced.
Reviewers: spatel, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28384
llvm-svn: 291357
Some GCC versions will accept any warning flag name after a '-Wno-',
which would cause us to try to disable warnings with names GCC didn't
understand. This will silently succeed unless there is some other output
from GCC in which case we get weird cc1plus warnings about the warning
name being bogus.
There is still the issue that gtest sets warning flags for building
gtest-all.cc using weird 'add_definitions' and the fact that there is
a GCC version which warns on the variadic macro usage in gtest under
-pedantic, but has no flag analogous to Clang's
-Wgnu-zero-variadic-macro-argumnets to suppress this warning. I haven't
been able to come up with any good solution here. The closest is to turn
off -pedantic for those versions of GCC, but that seems really nasty.
For now, those versinos of GCC aren't warning clean. If anyone is broken
by this, I'll work on CMake logic to detect and disable -pedantic in
these cases.
llvm-svn: 291299
a cxxabi.h in the include search paths.
This comes up when libc++ is installed with some other abi library. At
some points in time in history we have had CMake hackery to try and get
a cxxabi.h installed that would work, but there are lots of examples
lacking this. Also, the just-built tree with libc++ seems to not quite
get this right.
To let folks make progress, we can easily work around this by detecting
that the header is missing and disabling the relevant parts of gtest.
This should fix the last remainging build bot failures. While these
failures are typically indicative of a questionable install, I don't
think gtest should be the thing that surfaces those issues and I don't
want folks blocked on this.
llvm-svn: 291063
This required re-working the streaming support and lit's support for
'--gtest_list_tests' but otherwise seems to be a clean upgrade.
Differential Revision: https://reviews.llvm.org/D28154
llvm-svn: 291029
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
The usual method, and the one employed before my change, of displaying strings in natvis is to make use of the "<variable>,s" format specifier; however, this method only works for null-terminated strings. My fix here is to use the "<pointer>,[size]" format specifier to display a bounded array, and then cast it to "const char*", which in the MSVC debugger has the desired effect of rendering the character array as a string.
Differential Revision: https://reviews.llvm.org/D27972
llvm-svn: 290224
Just the minimal support to get it working at the moment.
Includes checks for test/CodeGen/ARM/vzip.ll as an example.
Differential Revision: https://reviews.llvm.org/D27829
llvm-svn: 290144
Make sure FileCheck --strict-whitespace --match-full-lines translates
'CHECK: bla ' into pattern '^ bla $' instead of pattern '^bla$'.
llvm-svn: 290069
The comment in ReadCheckFile claims that both leading and trailing whitespace
are removed, but the associated statement only removes leading whitespace.
llvm-svn: 290061
Still prints the empty/tombstone keys (which some people would prefer,
but I find pretty noisy) because I haven't yet found a reliable way to
skip them (it requires calling into the running process to do so, which
isn't ideal for a pretty printer (doesn't work on a core file, for
example) - and gdb's ability to do so (or my ability to figure out how
to get gdb to do so) is limited) left some breadcrumbs for the next
person who might try to address that.
llvm-svn: 290011
(some other implementations of an optional pretty printer print the full
name of the optional type (including template parameter) - but seems if
the template parameter isn't printed for std::vector, not sure why it
would be printed for optional, so erring on the side of consistency in
that direction here - compact, etc, as well)
llvm-svn: 289976
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
check file to not be unreasonably slow in the face of multiple check
prefixes.
The previous logic would repeatedly scan potentially large portions of
the check file looking for alternative prefixes. In the worst case this
would scan most of the file looking for a rare prefix between every
single occurance of a common prefix. Even if we bounded the scan, this
would do bad things if the order of the prefixes was "unlucky" and the
distant prefix was scanned for first.
None of this is necessary. It is straightforward to build a state
machine that recognizes the first, longest of the set of alternative
prefixes. That is in fact exactly whan a regular expression does.
This patch builds a regular expression once for the set of prefixes and
then uses it to search incrementally for the next prefix. This requires
some threading of state but actually makes the code dramatically
simpler. I've also added a big comment describing the algorithm as it
was not at all obvious to me when I started.
With this patch, several previously pathological test cases in
test/CodeGen/X86 are 5x and more faster. Overall, running all tests
under test/CodeGen/X86 uses 10% less CPU after this, and because all the
slowest tests were hitting this, finishes in 40% less wall time on my
system (going from just over 5.38s to just over 3.23s) on a release
build! This patch substantially improves the time of all 7 X86 tests
that were in the top 20 reported by --time-tests, 5 of them are
completely off the list and the remaining 2 are much lower. (Sadly, the
new tests on the list include 2 new X86 ones that are slow for unrelated
reasons, so the count stays at 4 of the top 20.)
It isn't clear how much this helps debug builds in aggregate in part
because of the noise, but it again makes mane of the slowest x86 tests
significantly faster (10% or more improvement).
llvm-svn: 289382
This fixes one formatting goof I left in my previous commit and *many*
other inconsistencies.
I'm planning to make substantial changes here and so wanted to get to
a clean baseline.
llvm-svn: 289379
make some readability improvements.
Both the check file and input file have to be fully buffered to
normalize their whitespace. But previously this would be done in a stack
SmallString and then copied into a heap allocated MemoryBuffer. That
seems pretty wasteful, especially for something like FileCheck where
there are only ever two such entities.
This just rearranges the code so that we can keep the canonicalized
buffers on the stack of the main function, use reasonably large stack
buffers to reduce allocation. A rough estimate seems to show that about
80% of LLVM's .ll and .s files will fit into a 4k buffer, so this should
completely avoid heap allocation for the buffer in those cases. My
system's malloc is fast enough that the allocations don't directly show
up in timings. However, on some very slow test cases, this saves 1% - 2%
by avoiding the copy into the heap allocated buffer.
This also splits out the code which checks the input into a helper much
like the code to build the checks as that made the code much more
readable to me. Nit picks and suggestions welcome here. It has really
exposed a *bunch* of stuff that could be cleaned up though, so I'm
probably going to go and spring clean all of this code as I have more
changes coming to speed things up.
llvm-svn: 289378
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
Summary:
Libc++ frequently has the need to parse more than just the builtin *test keywords* (`RUN`, `REQUIRES`, `XFAIL`, ect). For example libc++ currently needs a new keyword `MODULES-DEFINES: macro list...`. Instead of re-implementing the script parsing in libc++ this patch allows `parseIntegratedTestScript` to take custom parsers.
This patch introduces a new class `IntegratedTestKeywordParser` which implements the logic to parse/process a test keyword. Parsing of various keyword "kinds" are supported out of the box, including 'TAG', 'COMMAND', and 'LIST', which parse keywords such as `END.`, `RUN:` and `XFAIL:` respectively.
As an example after this change libc++ can implement the `MODULES-DEFINES` simply using:
```
mparser = IntegratedTestKeywordParser('MODULES-DEFINES:', ParserKind.LIST)
parseIntegratedTestScript(test, additional_parsers=[mparser])
macro_list = mparser.getValue()
```
Reviewers: ddunbar, modocache, rnk, danalbert, jroelofs
Subscribers: mgrang, llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D27005
llvm-svn: 288694
Bring the sorting check back that I removed in r288655 but put it under
EXPENSIVE_CHECKS this time. Also document that this the check isn't
purely about having a sorted list but also about operator < having the
correct transitive behavior.
Apply the same to the other check in the file.
llvm-svn: 288693
A debug build of AsmMatcherEmitter would use a quadratic algorithm to
check whether std::stable_sort() actually sorted. Let's hope the authors
of our C++ standard library did that testing for us. Removing the check
gives a 3x speedup in the X86 case.
llvm-svn: 288655
Tablegen's -gen-instr-info pass has a bug in its emitEnums() routine.
The function intends for values in a vector to be deduplicated, but it
accidentally skips over elements after performing a deletion.
I think there are smarter ways of doing this deduplication, but we can
do that in a follow-up commit if there's interest. See the thread:
[PATCH] TableGen InstrMapping Bug fix.
Patch by Tyler Kenney!
llvm-svn: 288408
This shouls now be safe and not break any more bots. It's strictly better to use '--sdk macosx', otherwise xcrun can return weird things for example when you have Command Line Tools or the SDK installed into '/'.
llvm-svn: 288385
When svn does not know the password and it has to prompt, it needs to query.
However it won't when invoked from the Python script and instead fails with:
svn: E215004: Authentication failed and interactive prompting is disabled; see the --force-interactive option
Differential Revision: https://reviews.llvm.org/D27274
llvm-svn: 288266
This reverts commit r287403. It breaks an internal asan bot. According
to Kuba, a fix is up for review here: https://reviews.llvm.org/D26929
llvm-svn: 287804
There were several cases in X86 where we were unable to fully factor a ScopeMatcher but created nested ScopeMatchers for some portions of it. Then we created a SwitchType that split it up and further factored it so that we ended up with something like this:
SwitchType
Scope
Scope
Sequence of matchers
Some other sequence of matchers
EndScope
Another sequence of matchers
EndScope
...Next type
This change turns it into this:
SwitchType
Scope
Sequence of matchers
Some other sequence of matchers
Another sequence of matchers
EndScope
...Next type
Several other in-tree targets had similar nested scopes like this. Overall this doesn't save many bytes, but makes the isel output a little more regular.
llvm-svn: 287624
Summary:
For Sparc the namespace (SP) is different from the target name (Sparc),
which causes the name of the array in this declaration to differ from
the name used in the definition.
Patch by Daniel Cederman.
Reviewers: jyknight
Subscribers: llvm-commits, jyknight
Differential Revision: https://reviews.llvm.org/D23650
llvm-svn: 287528
Previously we were factoring when the ScopeMatcher was initially created, but it might get more Matchers added to it later. Delay factoring until we have fully created/populated the ScopeMatchers.
This reduces X86 isel tables by 154 bytes.
llvm-svn: 287520
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
Summary:
This change is preparation for a change that will allow targets to verify that the instructions
they emit meet the predicates they specify. This is useful to ensure that C++
legalization/lowering/instruction-selection doesn't incorrectly select code for a different
subtarget than intended. Such cases are not caught by the integrated assembler when emitting
instructions directly to an object file.
Reviewers: qcolombet
Subscribers: qcolombet, beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25614
llvm-svn: 286945
This results in a speed-up of over 6x on sqlite3.
Before:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 415.07
user 410.00
sys 4.66
After with libYAML:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 63.96
user 60.03
sys 3.67
I followed these steps to get libYAML working with PyYAML: http://rmcgibbo.github.io/blog/2013/05/23/faster-yaml-parsing-with-libyaml/
llvm-svn: 286942
The existing logic was to discard any symbols representing function template
instantiations, as the definitions were assumed to be inline. But there are
three explicit specializations of clang::Type::getAs that are only defined in
Clang's lib/AST/Type.cpp, and at least the plugin used by the LibreOffice build
(https://wiki.documentfoundation.org/Development/Clang_plugins) uses those
functions.
Differential Revision: https://reviews.llvm.org/D26455
llvm-svn: 286841
When providing the project directory to the merge script, print it out in the
commit instructions instead of the default project directory.
llvm-svn: 286675
When a function is inlined, each instance is optimized in their own
inlining context. This can produce different remarks all pointing to
the same source line.
This adds a new column on the source view to display the inlining
context.
llvm-svn: 286537
Suspected to be the cause of a sanitizer-windows bot failure:
Assertion failed: isImm() && "Wrong MachineOperand accessor", file C:\b\slave\sanitizer-windows\llvm\include\llvm/CodeGen/MachineOperand.h, line 420
llvm-svn: 286385
A relocatable immediate is either an immediate operand or an operand that
can be relocated by the linker to an immediate, such as a regular symbol
in non-PIC code.
Start using relocImm for 32-bit and 64-bit MOV instructions, and for operands
of type "imm32_su". Remove a number of now-redundant patterns.
Differential Revision: https://reviews.llvm.org/D25812
llvm-svn: 286384
With this we get a new field in the YAML record if the value being
streamed out has a debug location. For examples, please see the changes
to the tests.
This is then used in opt-viewer to display a link for the callee
function in the inlining remarks.
Differential Revision: https://reviews.llvm.org/D26366
llvm-svn: 286169
Add a new script in llvm/utils/git-svn/. When present in the $PATH,
it enables a `git llvm` command. It is providing at this
point only the ability to push from the git monorepo: `git llvm push`.
It is intended to evolves with more features, for instance I plan on
features like `git llvm show r284955` to help working with sequential
revision numbers.
The push feature is taken from Justin Lebar's script available here:
https://github.com/jlebar/llvm-repo-tools/
Differential Revision: https://reviews.llvm.org/D26334
llvm-svn: 286138
Summary:
Some changes are made to cmake, especially the addition of a new
LLVM_ENABLE_PROJECTS option that makes the build system aware of
the monorepo directory structure.
Also a new script is added in llvm/utils/git-svn/. When present in
the $PATH, it enables a `git llvm` command. It is providing at this
point only the ability to push from the git monorepo: `git llvm push`.
It is intended to evolves with more features, for instance I plan on
features like `git llvm show r284955` to help working with sequential
revision numbers.
The push feature is taken from Justin Lebar's script available here:
https://github.com/jlebar/llvm-repo-tools/
Reviewers: jlebar
Subscribers: mgorny, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26334
llvm-svn: 286123
A large number of tests in the LLVM tree use the default (CHECK) prefix
to indicate checked expressions via FileCheck. Highlight it as a
special comment. Although this wont get all the instances of the
checked patters, it is strictly better than the current state.
llvm-svn: 285927
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
The CodeGenSchedModels::checkCompleteness routine in TableGen/
CodeGenSchedule.cpp is supposed to verify for each processor
model that is marked as "complete" that it actually defines a
scheduling class for each instruction.
However, this did not work correctly due to an incorrect
check whether a scheduling class has an itinerary.
Reviewer: atrick
Differential revision: https://reviews.llvm.org/D26156
llvm-svn: 285622
In --unified-report mode, a single coverage report is prepared for all
specified binaries and written to *report_dir*. This mode is compatible
with all existing script options, including the --restrict mode which is
used to limit coverage reporting to certain files or directories.
This should not break any existing users of the script.
llvm-svn: 285249
In --only-merge mode, the script terminates after the profile merging
step. This makes the script less stateful: it's more natural to split
the merge out into a separate step instead of relying on the first
invocation of the script to do it.
This should not break any existing users of the script.
llvm-svn: 285247
Summary:
This will allow us to revert LLD r284768, which added spaces to get MSys
echo to print what we want.
Reviewers: ruiu, inglorion, rafael
Subscribers: modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26009
llvm-svn: 285237
The sanitizer-windows bot turned red with:
FAILED: utils/TableGen/CMakeFiles/obj.llvm-tblgen.dir/IntrinsicEmitter.cpp.obj
C:\PROGRA~2\MICROS~1.0\VC\bin\AMD64_~2\cl.exe ... -c
C:\...\llvm\utils\TableGen\IntrinsicEmitter.cpp
c:\...\llvm\utils\tablegen\intrinsicemitter.cpp(254) :
fatal error C1001: An internal error has occurred in the compiler.
http://lab.llvm.org:8011/builders/sanitizer-windows/builds/114/steps/build%20clang%20lld/logs/stdio
llvm-svn: 285089
Summary:
r283710 introduced two regressions, one to llvm-lit, and the other to
lit executables that were installed via setuptools. Add instructions on
how to test for these regressions in the future.
Reviewers: ddunbar, delcypher, beanz, chapuni, cmatthews, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25459
llvm-svn: 284919
Summary:
SetVector already used DenseSet, but SmallSetVector used std::set. This
leads to surprising performance differences. Moreover, it means that
the set of key types accepted by SetVector and SmallSetVector are
quite different!
In order to make this change, we had to convert some callsites that used
SmallSetVector<std::string, N> to use SmallSetVector<CachedHashString, N>
instead.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25648
llvm-svn: 284887
-debug-only=subtarget-emitter prints a lot of machine model diagnostics.
This prunes the output so that the "No machine model for XXX on processor YYY"
only appears when there is definitely no machine model for that opcode.
Previously it was printing that error even if the opcode was covered by
a more general scheduling class.
<rdar://problem/15919845> [TableGen][CodeGenSchedule] Debug output does not help spotting the missing scheduling classes
llvm-svn: 284452
Update the CHECK lines in the shtest-timeout.py lit test to account for
the current output. The output has been changed in r271610 without
adjusting the tests.
Differential Revision: https://reviews.llvm.org/D25236
llvm-svn: 284057
Summary:
The Python file `utils/lit/lit/ShUtil.py` contains:
1. Logic used by lit itself
2. A set of unit tests for that logic, which can be run by invoking
`python utils/lit/lit/ShUtil.py`
Move these unit tests to a `tests/unit` subdirectory of lit, and run
the tests as part of lit's test suite. This ensures that, should the
lit test suite be included in LLVM's own regression test suite, these
unit tests will also be run.
(Instructions on how to run lit's test suite can be found in
`utils/lit/README.txt`.)
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25411
llvm-svn: 283968
Traceback (most recent call last):
File "bin/llvm-lit", line 44, in <module>
lit.main(builtin_parameters)
AttributeError: 'module' object has no attribute 'main'
Suggested by Artem Belevich.
llvm-svn: 283816
Summary:
Using Python linter flake8 on the utils/lit reveals several linter
warnings designated "F401: Unused import". Fix or silence these
warnings.
Some of these unused imports are legitimate, while some are part of lit's API.
For example, users of lit expect to be able to access `lit.formats.ShTest` in
their `lit.cfg`, despite the module hierarchy for that symbol actually being
`lit.formats.shtest.ShTest`. To silence linter errors for these lines,
include a "noqa" directive.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25407
llvm-svn: 283710
Summary:
`TestingProgressDisplay` initializes its `current` attribute to `None`, but
never reads or writes the value again. Remove it.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25415
llvm-svn: 283709
Summary:
`ArgumentError` is not defined by the Python standard library.
Executing this line of code would throw a exception, but not the
intended one. It would throw a `NameError` exception, since `ArgumentError`
is undefined.
Use `ValueError` instead, which is defined by the Python standard
library.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25410
llvm-svn: 283708
Summary:
Semicolons aren't necessary as statement terminators in Python, and
each of these uses are superfluous as they appear at the end of a line.
The convention is to not use semicolons where not needed, so remove them.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25409
llvm-svn: 283707
Summary: `prefix` is written to but never read.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25408
llvm-svn: 283706
Summary:
The minimum version of Python required to run LLVM's test suite is 2.7.
Remove a workaround for older Python versions.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25400
llvm-svn: 283705
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
This is a new tool built on top of the new YAML ouput generated from
optimization remarks. It produces HTML for easy navigation and
visualization.
The tool assumes that hotness information for the remarks is available
(the YAML file was produced with PGO). It uses hotness to list the
remarks prioritized by the hotness on the index page. Clicking the
source location of the remark in the list takes you the source where the
remarks are rendedered inline in the source.
For now, the tool is meant as prototype.
It's written in Python. It uses PyYAML to parse the input.
Differential Revision: https://reviews.llvm.org/D25348
llvm-svn: 283571
Summary:
The minimum version of Python necessary to run the LLVM test suite is
2.7. Code to work around Python 2.5 and lower isn't necessary.
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25209
llvm-svn: 283169
Summary:
optparse is deprecated in Python 2.7, which is the minimum version of
Python required to run the LLVM test suite. Replace its usage in lit
with argparse, optparse's 2.7 replacement module.
argparse has several benefits over optparse, but this commit does not
make use of those benefits yet. Instead, it simply uses the new API,
and attempts to keep the number of changes to a minimum.
Confirmed that lit's test suite, as well as LLVM's regression test suite,
still pass with these changes.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz, delcypher
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25173
llvm-svn: 283152
Summary:
lit's `OneCommandFileTest` class implements an abstract method that
raises if called. However, it raises by referencing an undefined
symbol. Instead, raise explicitly by throwing a `NotImplementedError`.
This is clearer, and appeases Python linters.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25170
llvm-svn: 283090
Summary:
In Python, `None` is a singleton, so checking whether a variable is
`None` may be done with `is` or `is not`. This has a slight advantage
over equiality comparisons `== None` and `!= None`, since `__eq__` may
be overridden in Python to produce sometimes unexpected results.
Using `is None` and `is not None` is also recommended practice in
https://www.python.org/dev/peps/pep-0008:
> Comparisons to singletons like `None` should always be done with `is` or
> `is not`, never the equality operators.
Patch by Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25168
llvm-svn: 283088
- This is primarily useful as a "fail fast" mode for lit, where it will stop
running tests after the first failure.
- Patch by Max Moiseev.
llvm-svn: 282452
Add two options to the code coverage artifact prep script:
* --use-existing-profdata: Use an existing indexed profile instead of
merging the same profiles again.
* --restrict: Restrict the coverage reporting to the given list of
source directories.
With this in place, we can teach the coverage bot how to prepare
separate reports for each of the llvm tools.
llvm-svn: 282204
In practice, it's way too noisy.
It's also a maintenance burden, since we apparently can't add tests for
it without breaking some Windows setups (see: D22692).
llvm-svn: 281871
descriptions now tag add instructions, and the Hexagon backend is using this to
identify loop induction statements.
Patch by Sam Parker and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D23601
llvm-svn: 281304
Previously, gtest/gtest_main were not exported via cmake. The intention here was
to ensure that users whom are linking against the LLVM install tree would not
get the gtest/gtest_main targets. This prevents downstream projects that link
against the LLVM build tree (i.e. Swift) from getting this dependency
information in their cmake builds. Without such dependency information, linker
issues can result on linux due to LLVMSupport being put before gtest on the
linker command line.
This commit preserves behavior that we want for the install tree, while adding
support for the build tree by:
1. The special casing for gtest/gtest_main in the add_llvm_library code is
removed in favor of a flag called "BUILDTREE_ONLY". If this is set, then the
library is communicating that it is only meant to be exported into the build
tree and is not meant to be installed or exported via the install tree. This
part is just a tweak to remove the special case, the underlying code is the
same.
2. The cmake code that exports cmake targets for the build tree has special code
to import an additional targets file called
LLVMBuildTreeOnlyExports.cmake. Additionally the extra targets are added to the
LLVMConfig.cmake's LLVM_EXPORTED_TARGETS variable. In contrast, the
"installation" cmake file uses the normal LLVM_EXPORTS_TARGETS as before and
does not include the extra exports file. This is implemented by
defining/undefining variables when performing a configure of the build/install
tree LLVMConfig.cmake files.
llvm-svn: 281085
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
Lots of unittests started failing under asan after r280455. It seems
they've been failing for a long time, but lit silently ignored them.
Downgrade the error so we can figure out what is going on.
Filed http://llvm.org/PR30285.
llvm-svn: 280674
Summary:
This is a follow up to r280455, where a check for the process exit code
was introduced. Some ASAN bots throw this error now, but it's impossible
to understand what's wrong with them, and the issue is not reproducible.
Reviewers: vitalybuka
Differential Revision: https://reviews.llvm.org/D24210
llvm-svn: 280550
Do this by creating a temp directory in the normal system temp
directory, and cleaning it up on exit.
It is still possible for this temp directory to leak if Python exits
abnormally, but this is probably good enough for now.
Fixes PR18335
llvm-svn: 280501
googletest formatted tests are discovered by running the test executable.
Previously testing would silently succeed if the test executable crashed
during the discovery process. Now testing fails with "error: unable to
discover google-tests ..." if the test executable exits with a non-zero status.
llvm-svn: 280455
Apparently nobody evaluated multiprocessing on Windows since Daniel
enabled multiprocessing on Unix in r193279. It works so far as I can
tell.
Today this is worth about an 8x speedup (631.29s to 73.25s) on my 24
core Windows machine. Hopefully this will improve Windows buildbot cycle
time, where currently it takes more time to run check-all than it does
to self-host with assertions enabled:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/20
build stage 2 ninja all ( 28 mins, 22 secs )
ninja check 2 stage 2 ( 37 mins, 38 secs )
llvm-svn: 280382
This mapping is between pointers, which DenseMap is particularly good
at. Most targets aren't really affected, but if there's a lot of
subregister composition this can shave off a good chunk of time from
generating registers.
llvm-svn: 279875
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
This tries to keep all the ModRM memory and register forms in their own regions of the encodings. Hoping to make it simple on some of the switch statements that operate on these encodings.
llvm-svn: 279422
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
r276409 changed the coverage summary format. Update the script so that
it can parse the new output, and incorporate the new information into
its warnings.
llvm-svn: 276446
They were all auto-incremented from 0 anyway, and I'm getting really annoying
conflicts and runtime failures when different people add more for GlobalISel
(and even when I'm refactoring my own patches).
NFC.
llvm-svn: 276204
This is for a situation where the encoding for a register may be
different depending on the specific operand. For some instructions,
we want to apply additional restrictions beyond the encoding's
constraints.
In AMDGPU some operands are VSrc_32, using the VS_32 pseudo register
class which accept VGPRs, SGPRs, or immediates in the encoding.
Some specific instructions with the same encoding operand do not want
to allow immediates or SGPRs, but the encoding format is different
in this case than a regular VGPR_32 operand.
This allows specifying the encoding should be treated the same
without introducing yet another dummy register class.
llvm-svn: 275929
Instead of extracting raw coverage mappings into an artifact directory,
actually generate useful html reports for a given list of binaries with
symbol demangling turned on.
No tests, but this is actively being used to drive the (still nascent)
coverage bot.
llvm-svn: 275927
This doesn't seem to work with Bash:
$ /work/llvm/utils/release/merge.sh --proj llvm --rev r275870
/work/llvm/utils/release/merge.sh: line 34: ${$1#r}: bad substitution
I get the same error with and without a leading 'r'.
llvm-svn: 275898
This splits out the intrinsic table such that generic intrinsics come
first and target specific intrinsics are grouped by target. From here
we can find out which target an intrinsic is for or differentiate
between generic and target intrinsics.
The motivation here is to make it easier to move target specific
intrinsic handling out of generic code.
llvm-svn: 275575
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
llvm-svn: 275367
This achieves the same result as previously by using line wrapping. This allows
us to have one keyword per line which makes adding a new keyword significantly
easier, especially if they are inserted in a lexicographical sort order as you
no longer need to reflow the content around it.
This only does the keywords as that is the group which changes more often.
llvm-svn: 275248
Ran clang-format to remove the namespace indentation, and stopped
repeating names in doc comments since I was updating every line
anyway.
llvm-svn: 274919
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
llvm-svn: 274485
This patch adds support for including the avx512 mask register information in the mask/maskz versions of shuffle instruction comments.
This initial version just adds support for MOVDDUP/MOVSHDUP/MOVSLDUP to reduce the mass of test regenerations, other shuffle instructions can be added in due course.
Differential Revision: http://reviews.llvm.org/D21953
llvm-svn: 274459
This involved running 2to3 on it and adjusting all uses of subprocess to use
universal_newlines=True so the output is text instead of binary. It remains
compatible with Python 2.7.
llvm-svn: 274365
This variable is used by ASan (and other sanitizers in the future)
on s390x-linux to override a check for CVE-2016-2143 in the running
kernel (see revision 267747 on compiler-rt). Since the check simply
checks if the kernel version is in a whitelist of known-good versions,
it may miss distribution kernels, or manually-patched kernels - hence
the need for this variable. To enable running the ASan testsuite on
such kernels, this variable should be passed from the environment
down to the testcases.
Differential Revision: http://reviews.llvm.org/D19888
llvm-svn: 273825
The previous code would always do 1 or 2 prefix compares;
explicitly only do one.
This speeds up debug -gen-asm-matcher by ~10% (e.g. X86: 40s -> 35s).
llvm-svn: 273583
Currently isComplete = 1 requires that every instruction must
be described, declared unsupported or marked as having no
scheduling information for a processor.
For some backends such as MIPS, this requirement entails
long regex lists of instructions that are unsupported.
This patch teaches Tablegen to skip over instructions that
are associated with unsupported feature when checking if the
scheduling model is complete.
Patch by: Daniel Sanders
Contributions by: Simon Dardis
Reviewers: MatzeB
Differential Reviewer: http://reviews.llvm.org/D20522
llvm-svn: 273551
Nearly all the changes to this pass have been done while maintaining and
updating other parts of LLVM. LLVM has had another pass, SROA, which
has superseded ScalarReplAggregates for quite some time.
Differential Revision: http://reviews.llvm.org/D21316
llvm-svn: 272737
Summary:
This new alias takes a comma separated list of prefixes which allows
'--check-prefix=A --check-prefix=B --check-prefix=C' to be written as
'--check-prefixes=A,B,C'.
Reviewers: probinson
Subscribers: probinson, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D21293
llvm-svn: 272670
When visualizing small vectors in VS2015, show the first few elements in the DisplayString instead of the size. For example, a SmallVector of DeclAccessPair will visualize like
{public typename ...Ts, public typename U}
The visualization in VS2013 remains the same because we continue to include the old visualizer with a lower-than-default priority of MediumLow, and the same SmallVector would continue to be visualized as
{size = 2}
llvm-svn: 272525
The script now replace '.LCPI888_8' style asm symbols with the {{\.LCPI.*}} re pattern - this helps stop hardcoded symbols in 32-bit x86 tests changing with every edit of the file
Refreshed some tests to demonstrate the new check
llvm-svn: 272488
- The intended use of this was just in diagnostics, so we shouldn't pay the
cost of reading these all the time.
- This will avoid including the full output of each command in tests which
fail, but the most important use case for this was to gather the output of
the specific command which failed.
llvm-svn: 272365
Use os.devnull instead of tempfiles when substituting '/dev/null' on
Windows machines. This should make the bots just a bit speedier.
Thanks to Yunzhong Gao for testing this patch on Windows!
Differential Revision: http://reviews.llvm.org/D20549
llvm-svn: 272290
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
- This will cause lit to automatically include the first 1K of data in
redirected output files when a command fails (previously if the command
failed, but the main point of the test was, say, a `FileCheck` later on, then
the log wasn't helpful in showing why the command failed).
llvm-svn: 272021
will appear after a blank. This assumption does not hold in the ARM
target.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20234
llvm-svn: 271666
consider the Predicates attached to InstAlias when generating printAliasInstr.
This forces users of printAliasInstr to check those predicates beforehand.
This commit adds them in the condition set of the IAPrinter object.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20233
llvm-svn: 271665
- This only applies to scripts executed by the _internal_ shell script
interpreter.
- This patch reworks the log to look more like a shell transcript, and be less
verbose (but in the interest of calling attention to the important parts).
Here is an example of the new format, for commands with/without failures and
with/without output:
```
$ true
$ echo hi
hi
$ false
note: command had no output on stdout or stderr
error: command failed with exit status 1
```
llvm-svn: 271610
Summary:
This patch adds a "REQUIRES-ANY" feature test that is disjunctive. This marks a test as `UNSUPPORTED` if none of the specified features are available.
Libc++ has the need to write feature test such as `// REQUIRES-ANY: c++98, c++03` when testing of behavior that is specific to older dialects but has since changed.
Reviewers: rnk, ddunbar
Subscribers: ddunbar, probinson, llvm-commits, cfe-commits
Differential Revision: http://reviews.llvm.org/D20757
llvm-svn: 271468
The problem with plugins on Windows is that when building a plugin DLL it needs
to explicitly link against something (an exe or DLL) if it uses symbols from
that thing, and that thing must explicitly export those symbols. Also there's a
limit of 65535 symbols that can be exported. This means that currently plugins
only work on Windows when using BUILD_SHARED_LIBS, and that doesn't work with
MSVC.
This patch adds an LLVM_EXPORT_SYMBOLS_FOR_PLUGINS option, which when enabled
automatically exports from all LLVM tools the symbols that a plugin could want
to use so that a plugin can link against a tool directly. Plugins can specify
what tool they link against by using PLUGIN_TOOL argument to llvm_add_library.
The option can also be enabled on Linux, though there all it should do is
restrict the set of symbols that are exported as by default all symbols are
exported.
This option is currently OFF by default, as while I've verified that it works
with MSVC, linux gcc, and cygwin gcc, I haven't tried mingw gcc and I have no
idea what will happen on OSX. Also unfortunately we can't turn on
LLVM_ENABLE_PLUGINS when the option is ON as bugpoint-passes needs to be
loaded by both bugpoint.exe and opt.exe which is incompatible with this
approach. Also currently clang plugins don't work with this approach, which
will be fixed in future patches.
Differential Revision: http://reviews.llvm.org/D18826
llvm-svn: 270839
This means SelectCode unconditionally returns nullptr now. I'll follow
up with a change to make that return void as well, but it seems best
to keep that one very mechanical.
This is part of the work to have Select return void instead of an
SDNode *, which is in turn part of llvm.org/pr26808.
llvm-svn: 269136
Summary:
This change allows to specify "DefaultMethod" for optional operand (IsOptional = 1) in AsmOperandClass that return default value for operand. This is used in convertToMCInst to set default values in MCInst.
Previously if you wanted to set default value for operand you had to create custom converter method. With this change it is possible to use standard converters even when optional operands presented.
Reviewers: tstellarAMD, ab, craig.topper
Subscribers: jyknight, dsanders, arsenm, nhaustov, llvm-commits
Differential Revision: http://reviews.llvm.org/D18242
llvm-svn: 268726
Pattern predicates already appear to be emitted as far down as they can be. The optimization was making no changes on any in-tree target.
llvm-svn: 268705
This opcode never happens in practice, and yet the logic we have in
place to handle it would be undefined behaviour if we ever executed
it. Remove it rather than trying to refactor code that's never
reached.
llvm-svn: 268692
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
This backend was supposed to generate C++ code which will re-construct
the LLVM IR passed as input. This seems to me to have very marginal
usefulness in the first place.
However, the code has never been updated to use IRBuilder, which makes
its current value negative -- people who look at the output may be
steered to use the *wrong* C++ APIs to construct IR.
Furthermore, it's generated code that doesn't compile since at least
2013.
Differential Revision: http://reviews.llvm.org/D19942
llvm-svn: 268631
Summary:
We need these variables to concatenate two absolute paths to construct
a valid path. Currently, %t\%t is, for example, expanded to C:\foo\C:\foo,
which is not a valid path because ":" is not a valid path character
on Windows. With this patch, %t will be expanded to C\foo.
Differential Revision: http://reviews.llvm.org/D19757
llvm-svn: 268168
This function performs the reverse computation of
composeSubRegIndexLaneMask().
It will be used in the upcoming "DetectDeadLanes" pass.
llvm-svn: 267849
Previously using lanemasks on registers without any subregisters was not
well defined. This commit extends TargetRegisterInfo/tablegen to:
- Report a lanemask of 1 for regclasses without subregisters
- Do the right thing when mapping a 0/1 lanemask from a class without
subregisters into a class with subregisters in
TargetRegisterInfo::composeSubRegIndexLaneMasks().
This will be used in the upcoming "DetectDeadLanes" patch.
llvm-svn: 267848
This allows ulittle* and ubig* types to be visualized properly
in VS.
Differential Revision: http://reviews.llvm.org/D19339
Reviewed By: Aaron Ballman
llvm-svn: 267050
Summary:
IntrReadWriteArgMem simply becomes IntrArgMemOnly.
So there are fewer intrinsic properties that express their orthogonality
better, and correspond more closely to the corresponding IR attributes.
Suggested by: Philip Reames
Reviewers: joker.eph, reames, tstellarAMD
Subscribers: jholewinski, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19291
llvm-svn: 267021
Summary:
LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
See D18749 for reference.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19081
llvm-svn: 266842
Summary:
This property is used to mark an intrinsic that only writes to memory, but
neither reads from memory nor has other side effects.
An example where this is useful is the llvm.amdgcn.buffer.store.format.*
intrinsic, which corresponds to a store instruction that goes through a special
buffer descriptor rather than through a plain pointer.
With this property, the intrinsic should still be handled as having side
effects at the LLVM IR level, but machine scheduling can make smarter
decisions.
Reviewers: tstellarAMD, arsenm, joker.eph, reames
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18291
llvm-svn: 266826
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
This required changing several places to print VT enums as strings instead of raw ints since the proper method to use to print became ambiguous. This is probably an improvement anyway.
This also appears to save ~8K from an x86 self host build of llc.
llvm-svn: 266562
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Summary: LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
Reviewers: Wallbraker, whitequark, joker.eph, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18749
llvm-svn: 266257
We could make this an option if people don't like it.
But since part of the reason for using a script to generate
checks is to prevent lazy checking that lets bugs crawl
through, let's have the script check the first line too.
For asm tests, it ensures that nothing unexpected has
happened before the first line of asm. This matches the
existing behavior of update_llc_test_checks.py.
More discussion in PR22897:
https://llvm.org/bugs/show_bug.cgi?id=22897
llvm-svn: 265414
Summary:
Upstream googletest prints "Running main() from gtest_main.cc" to stdout prior
to running tests. LLVM removed that print statement in r61540. If a user were
to use lit to run tests that use upstream googletest, however, lit
reports "Running main()" as an invalid test name.
To avoid such a failure, add an extra conditional to `formats/googletest.py`.
Also add tests to demonstrate the modified behavior.
Reviewers: abdulras, ddunbar
Subscribers: ddunbar, llvm-commits, kastiglione
Differential Revision: http://reviews.llvm.org/D18606
llvm-svn: 265034
When using Visual Studio 2015, cmake now puts the native visualizers in llvm.sln, so the developer automatically sees custom visualizations.
Much thanks to ariccio who provided extensive help on this change. (manual installation still needed on VS2013)
llvm-svn: 264601
This is an enhancement of the existing update_llc_test_checks.py script.
It adds some of the functionality from the script used in D17999 to make
the IR checking more flexible.
The bad news:
This actually is 'My First Python Program'. Thus, it's likely that I have
violated all best practices of Python programming if I've made a functional
change from the original program. If you see anything that's obviously
wrong, please let me know or feel free to fix it. I didn't even read any
documentation...
The good news:
I tested this on ~10 existing opt/llc regression tests, and it does what
I hoped for. It produces exact checking for IR regression tests and doesn't
signficantly change the existing llc-with-x86-target asm checking. The opt
tests that were modified in r263667, r263668, r263674, and r263679 are
examples of the expected results, except that this version of the script
puts the check lines ahead of the IR to follow the existing llc/asm
behavior.
If there are no complaints/fallout, we should be able to remove the
original script. Extending this script to be used for non-x86 and clang
regression tests would be the expected follow-up steps.
llvm-svn: 264357
We lose the 'utils' directory name in our advertising line with
this change. We could retain that, but I don't see the point.
This removes a dependency for making the script apply to more than
'llc'. Ie, we'll want to change the script name if it works with
opt/clang too.
llvm-svn: 264310
The goal is to enhance this script to be used with opt and clang:
Break 'main' into functions and change variable names to be more
generic because we want to handle more than x86 asm output.
llvm-svn: 264307
The goal is to enhance this script to be used with opt and clang:
Group all of the regexes together, so it's easier to see what's going on.
This will make it easier to break main() up into pieces too.
Also, note that some of the regexes are for x86-specific asm.
llvm-svn: 264197
In the <DisplayString> of PointerIntPair , I cast the pointer to the actual type, so VS can leverage it while visualizing, not unlike the recent change to PointerUnion visualization.
In the expansion, the current code is casting to the incorrect type (wrong number of stars), so I fixed that as well.
llvm-svn: 263821
Summary:
The multiprocessing.Queue.put() call can hang if we try queueing all the
tests before starting to take them out of the queue.
The current implementation hangs if tests exceed 2^^15, on Mac OS X.
This might happen with a ninja check-all if one has a bunch of llvm
projects.
Reviewers: delcypher, bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17609
llvm-svn: 263731
This lets us for example start running the unit test suite early. For
'check-llvm' on my machine, this drops the tim e from 44s to 32s!!!!!
It's pretty ugly. I barely know how to write Python, so feel free to
just tell me how I should write it instead. =D Thanks to Filipe and
others for help.
Differential Revision: http://reviews.llvm.org/D18089
llvm-svn: 263329
TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
llvm-svn: 262383
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Combinations of suffixes that look useful are actually ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262263
Combinations of suffixes that look useful actually are ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262092
Patch by Jack Howarth.
When linking to libLLVM, don't also link to the component
libraries that constitute libLLVM.
Differential Revision: http://reviews.llvm.org/D16945
llvm-svn: 260641
Currently you can't specify node properties like commutativity on
a PatFrag. If you want to create a PatFrag on a commutative node
with a hasOneUse predicate, this enables you to specify that the
PatFrag is also commutable.
llvm-svn: 260404
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
Summary:
This makes it possible to specify some operands as optional to the AsmMatcher.
Setting this field to true will prevent the AsmMatcher from emitting
'too few operands' errors when there are missing optional operands.
Reviewers: olista01, ab
Subscribers: nhaustov, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15755
llvm-svn: 259913
Fix the lit bug that enabled this "feature" (empty triple is substring
of all possible target triples) and change the two outliers to use the
documented * syntax.
llvm-svn: 259799
Summary:
This patch adds a reserve call to an expensive function
(`llvm::LoadIntrinsics`), and may fix a few other low hanging
performance fruit (I've put them in comments for now, so we can
discuss).
**Motivation:**
As I'm sure other developers do, when I build LLVM, I build the entire
project with the same config (`Debug`, `MinSizeRel`, `Release`, or
`RelWithDebInfo`). However, the `Debug` config also builds llvm-tblgen
in `Debug` mode. Later build steps that run llvm-tblgen then can
actually be the slowest steps in the entire build. Nobody likes slow
builds.
Reviewers: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D16832
Patch by Alexander G. Riccio
llvm-svn: 259683
Summary:
This adds a new attribute which targets can set in TableGen which causes a function to be generated which matches register alternative names. This is very similar to `ShouldEmitMatchRegisterName`, except it works on alt names.
This patch is currently used by the out of tree part of the AVR backend. It reduces code duplication greatly, and has the effect that you do not need to hardcode altname to register mappings in C++.
It will not work on targets which have registers which share the same aliases.
Reviewers: stoklund, arsenm, dsanders, hfinkel, vkalintiris
Subscribers: hfinkel, dylanmckay, llvm-commits
Differential Revision: http://reviews.llvm.org/D16312
llvm-svn: 259636
Summary:
r257791 disabled the test-suite export since the addition of CMakeLists.txt was
causing build failures. This patch exports the test-suite again but does so
outside the source tree so that it isn't included in the Phase[123] builds.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16679
llvm-svn: 259094
Strip dos line endings from llc generated files to allow the regex patterns to match them.
Ensure updated *.ll files are generated with unix style line endings.
llvm-svn: 258987
If a lit test has a RUN line that includes a redirection to "/dev/tty", the
redirection goes to the special device file corresponding to the console. It
is /dev/tty on UNIX-like systems and "CON" on Windows.
This patch is needed to implement a test like PR25717 (caused by the size limit
of the Windows system call WriteConsole() prior to Windows 8) where the test
only breaks when outputing to the console and won't fail if using a pipe.
llvm-svn: 258898
This brings the compile time of Function.cpp from ~40s down to ~4s for
me locally. It also shaves off about 400KB of object file size in a
release+asserts build.
I also realized that the AMDGPU backend does not have any GCC builtin
names to match, so the extra lookup was a no-op. I removed it to silence
a zero-length string table array warning. There should be no functional
change here.
This change really ends the story of PR11951.
llvm-svn: 258897
Here, sed is used to prepare object files for comparison via cmp. On my Darwin
15.4.0 machine, LC_CTYPE is set to UTF-8 (by default, I believe). Under these
circumstances, anything sed is made to read will be treated as UTF-8, prompting
it to signal an error if it is not, like so:
% sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
sed: RE error: illegal byte sequence
1
%
To make sed work as expected, I need to set LC_CTYPE to C:
% env LC_CTYPE=C sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
0
%
Without this change, sed will exit with an error for every single file that it
compares between phase 2 and phase 3, thereby making it look as if the
differences were far larger than they are.
Patch by Elias Pipping!
Differential Revision: http://reviews.llvm.org/D16548
llvm-svn: 258891
The AMDGPU backend was the last user of the old StringMatcher
recognition code. Move it over to the new lookupLLVMIntrinsicName
funciton, which is now improved to handle all of the interesting edge
cases exposed by AMDGPU intrinsic names.
llvm-svn: 258875
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Step one towards using a simple binary search to lookup intrinsic IDs
instead of our crazy table generated switch+memcmp+startswith code that
makes Function.cpp take about a minute to compile. See PR24785 and
PR11951 for why we should do this.
The X86 backend contains tables that need to be sorted on intrinsic ID,
so reorder those.
llvm-svn: 258757
This is a fix for https://llvm.org/bugs/show_bug.cgi?id=22796.
The previous implementation of ClassInfo::operator< allowed cycles of classes
such that x < y < z < x, meaning that a list of them cannot be correctly
sorted, and the sort order could differ with different standard libraries.
The original implementation sorted classes by ValueName if they were otherwise
equal. This isn't strictly necessary, but some backends seem to accidentally
rely on it. If I reverse this comparison I get 8 test failures spread across
the AArch64, Mips and X86 backends, so I have left it in until those backends
can be fixed.
There was one case in the X86 backend where the observable behaviour of the
assembler is changed by this patch. This was because some of the memory asm
operands were not marked as children of X86MemAsmOperand.
Differential Revision: http://reviews.llvm.org/D16141
llvm-svn: 258677
instead of using symlinks
Summary:
In the past I have run into several problems with the way
`test-release.sh` creates all the subproject directories as siblings,
and then uses symlinks to stitch them all together. In some scenarios
this leads to clang not being able to find header files, etc.
This patch changes the script so it directly exports into the correct
target locations for each subproject.
Reviewers: hans
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D16420
llvm-svn: 258436
The selection process being split into separate passes, we need generic opcodes
to translate the LLVM IR to target independent code.
This patch adds an opcode for addition: G_ADD.
Differential Revision: http://reviews.llvm.org/D15472
llvm-svn: 258333
r100895 landed an llvm-only change to add minix support to googletest.
It did that by putting "defined()" in a macro, which has undefined
behavior. Slightly reshuffle things to remove that undefined behavior.
Also mention in README.LLVM that minix support is a local change.
llvm-svn: 258190
Adds the corresponding CodeGenInstruction number to each AsmWriterInst. Then write all the operand uniqueing loops using the AsmWriterInst array and indices. Then use the CodeGenInstruction index to fill out the OpCodeInfo array.
llvm-svn: 258005
is < ``2.0``.
Older versions of psutil (e.g. ``1.2.1`` which is the version shipped with
Ubuntu 14.04) use a different API for retrieving the child processes.
To handle this try the new API first and if that fails try the old API.
llvm-svn: 257616
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
llvm-svn: 257268
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
llvm-svn: 257221
This restores the previous behavior of not including the mnemonic in the classes table for every target that starts instruction lines with the mnemonic. Not only did the table size increase by 1 entry, but the class enum increased in size which caused every class in the array to increase in size. It also grew the size of the function that parsers tokens into classes by a substantial amount.
This adds a new HasMnemonicFirst flag to all AsmParsers. It's set to 1 by default and Hexagon target overrides it to 0.
For the X86 target alone this recovers 324KB of size on the llvm-mc executable.
I believe the current state is still a bad design choice for the Hexagon target as it causes most of the parsing to do a linear search through the entire match table to comparing operands against every instruction until it finds one that works. At least for the other targets we do a binary search based on mnemonic over which to do the linear scan.
llvm-svn: 256669
This should work with ShTest (executed externally or internally) and GTest
test formats.
To set the timeout a new option ``--timeout=`` has
been added which specifies the maximum run time of an individual test
in seconds. By default this 0 which causes no timeout to be enforced.
The timeout can also be set from a lit configuration file by modifying
the ``lit_config.maxIndividualTestTime`` property.
To implement a timeout we now require the psutil Python module if a
timeout is requested. This dependency is confined to the newly added
``lit.util.killProcessAndChildren()``. A note has been added into the
TODO document describing how we can remove the dependency on the
``pustil`` module in the future. It would be nice to remove this
immediately but that is a lot more work and Daniel Dunbar believes it is
better that we get a working implementation first and then improve it.
To avoid breaking the existing behaviour the psutil module will not be
imported if no timeout is requested.
The included testcases are derived from test cases provided by
Jonathan Roelofs which were in an previous attempt to add a per test
timeout to lit (http://reviews.llvm.org/D6584). Thanks Jonathan!
Reviewers: ddunbar, jroelofs, cmatthews, MatzeB
Subscribers: cmatthews, llvm-commits
Differential Revision: http://reviews.llvm.org/D14706
llvm-svn: 256471
This reapplies r256277 with two changes:
- In emitFnAttrCompatCheck, change FuncName's type to std::string to fix
a use-after-free bug.
- Remove an unnecessary install-local target in lib/IR/Makefile.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256304
For targets to add their own operand types as needed, as advertised in
Operand's comment, they need to be able to specify an alternate namespace
for OperandType names too. This matches the RegisterOperand class.
llvm-svn: 256299
This reapplies r252990 and r252949. I've added member function getKind
to the Attr classes which returns the enum or string of the attribute.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 256277
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
AsmWriterEmitter will generate a getRegisterName function with an alternate
register name index as its second argument if the target makes use of them. The
enum of these values is generated in RegisterInfoEmitter. The getRegisterName
generator would assume the namespace could always be found by reading index 1
of the list of AltNameIndices, but this will fail if this list is sorted such
that the NoRegAltName is at index 1. Because this list is sorted by record name
(in CodeGenTarget::ReadRegAltNameIndices), you only run in to problems if your
MyTargetRegisterInfo.td defines a single RegAltNameIndex that sorts lexically
before NoRegAltName.
For example, if a target has something like
def AnAltNameIndex : RegAltNameIndex
and defines RegAltNameIndices for some registers then, prior to this change,
AsmWriterEmitter would generate references to
::AnAltNameIndex and ::NoRegAltName
Patch by Alex Bradbury!
llvm-svn: 255344
Patch turns on OpenMP support in clang by default after fixing OpenMP buildbots.
Differential Revision: http://reviews.llvm.org/D13802
llvm-svn: 255222
The Statistical Profiling Extension is an optional extension to
ARMv8.2-A. Since it is an optional extension, I have added the
FeatureSPE subtarget feature to control it. The assembler-visible parts
of this extension are the new "psb csync" instruction, which is
equivalent to "hint #17", and a number of system registers.
Differential Revision: http://reviews.llvm.org/D15021
llvm-svn: 254401
autogenerated.
Also update existing test cases which appear to be generated by it and
weren't modified (other than addition of the header) by rerunning it.
llvm-svn: 253917
Duplicate a few common definitions between DFAPacketizer.cpp and
DFAPacketizerEmitter.cpp to avoid including files from CodeGen
in TableGen.
llvm-svn: 253820
Extended DFA tablegen to:
- added "-debug-only dfa-emitter" support to llvm-tblgen
- defined CVI_PIPE* resources for the V60 vector coprocessor
- allow specification of multiple required resources
- supports ANDs of ORs
- e.g. [SLOT2, SLOT3], [CVI_MPY0, CVI_MPY1] means:
(SLOT2 OR SLOT3) AND (CVI_MPY0 OR CVI_MPY1)
- added support for combo resources
- allows specifying ORs of ANDs
- e.g. [CVI_XLSHF, CVI_MPY01] means:
(CVI_XLANE AND CVI_SHIFT) OR (CVI_MPY0 AND CVI_MPY1)
- increased DFA input size from 32-bit to 64-bit
- allows for a maximum of 4 AND'ed terms of 16 resources
- supported expressions now include:
expression => term [AND term] [AND term] [AND term]
term => resource [OR resource]*
resource => one_resource | combo_resource
combo_resource => (one_resource [AND one_resource]*)
Author: Dan Palermo <dpalermo@codeaurora.org>
kparzysz: Verified AMDGPU codegen to be unchanged on all llc
tests, except those dealing with instruction encodings.
Reapply the previous patch, this time without circular dependencies.
llvm-svn: 253793
Extended DFA tablegen to:
- added "-debug-only dfa-emitter" support to llvm-tblgen
- defined CVI_PIPE* resources for the V60 vector coprocessor
- allow specification of multiple required resources
- supports ANDs of ORs
- e.g. [SLOT2, SLOT3], [CVI_MPY0, CVI_MPY1] means:
(SLOT2 OR SLOT3) AND (CVI_MPY0 OR CVI_MPY1)
- added support for combo resources
- allows specifying ORs of ANDs
- e.g. [CVI_XLSHF, CVI_MPY01] means:
(CVI_XLANE AND CVI_SHIFT) OR (CVI_MPY0 AND CVI_MPY1)
- increased DFA input size from 32-bit to 64-bit
- allows for a maximum of 4 AND'ed terms of 16 resources
- supported expressions now include:
expression => term [AND term] [AND term] [AND term]
term => resource [OR resource]*
resource => one_resource | combo_resource
combo_resource => (one_resource [AND one_resource]*)
Author: Dan Palermo <dpalermo@codeaurora.org>
kparzysz: Verified AMDGPU codegen to be unchanged on all llc
tests, except those dealing with instruction encodings.
llvm-svn: 253790
the script when running a ShTest with an external or internal shell.
This bug is caused by use of the ``map`` function in Python 3 which
returns an iterable (rather than a list in Python 2). After the iterable
is exhausted it won't return any more output and consequently when
``_runShTest()`` tries to access the ``script`` which has already been
iterated over it is empty. Converting to a list immediatley after
calling ``map()`` fixes this.
This fixes the ``tests/shtest-format.py`` test when running under
Python3 which was previously failing.
llvm-svn: 253556
We use to have an odd difference among MapVector and SetVector. The map
used a DenseMop, but the set used a SmallSet, which in turn uses a
std::set.
I have changed SetVector to use a DenseSet. If you were depending on the
old behaviour you can pass an explicit set type or use SmallSetVector.
The common cases for needing to do it are:
* Optimizing for small sets.
* Sets for types not supported by DenseSet.
llvm-svn: 253439
Allowing imprecise lane masks in case of more than 32 sub register lanes
lead to some tricky corner cases, and I need another bugfix for another
one. Instead I rather declare lane masks as precise and let tablegen
abort if we do not have enough bits.
This does not affect any in-tree target, even AMDGPU only needs 16 lanes
at the moment. If the 32 lanes turn out to be a problem in the future,
then we can easily change the LaneBitmask typedef to uint64_t.
Differential Revision: http://reviews.llvm.org/D14557
llvm-svn: 253279
MCSubtargetInfo in the subclasses into MCTargetAsmParser and define a
member function getSTI.
This is done in preparation for making changes to shrink the size of
MCRelaxableFragment. (see http://reviews.llvm.org/D14346).
llvm-svn: 253124
instead of executable if the argument was found inside a directory
contained in PATH.
An example where this could cause a problem is if there was a RUN line
that ran the ``test`` command and if the user had a directory in their
PATH that contained a directory called ``test/`` (that occured before
``/usr/bin/``). Lit would try to use the directory as the executable
which would fail with the rather cryptic message.
```
Could not create process due to [Errno 13] Permission denied
```
llvm-svn: 253031
This reapplies r252949. I've changed the type of FuncName to be
std::string instead of StringRef in emitFnAttrCompatCheck.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252990
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252949
This is a step towards consolidating some of the information regarding
attributes in a single place.
This patch moves the enum attributes in Attributes.h to the table-gen
file. Additionally, it adds definitions of target independent string
attributes that will be used in follow-up commits by the inliner to
check attribute compatibility.
rdar://problem/19836465
llvm-svn: 252796
The existing -v option only displays commands and outputs for failed
tests, the newly introduced -a displays it for all executed tests.
llvm-svn: 251806
There is no need to generate separate table for intrinsics mod ref behaviour.
It can now be determined purely from function attributes.
Differential Revision: http://reviews.llvm.org/D13917
llvm-svn: 251040
This script prints a CSV of all misched models of a target when given the output of the debug output of subtarget using:
llvm-tblgen --gen-subtarget --debug-only=subtarget-emitter ...
With thanks to Dave Estes for mentioning the idea at the 2014 LLVM Developers' Meeting.
Patch by Christof Douma!
llvm-svn: 250020
It is common to have a default soft process limit, at least on some families of
Linux distributions, of 1024. This is normally more than enough, but if you
have many cores, and you're running tests that create many threads, this can
become a problem. My POWER7 development machine has 48 cores, and when running
the lld regression tests, which often want to create up to 48 threads, I run
into problems. lit, by default, will want to run 48 tests in parallel, and
48*48 < 1024, and so many tests fail like this:
terminate called after throwing an instance of 'std::system_error'
what(): Resource temporarily unavailable
or lit fails like this when launching a test:
OSError: [Errno 11] Resource temporarily unavailable
lit can easily detect this situation and attempt to repair it before launching
tests (by raising the soft process limit to something that will allow ncpus^2
threads to be created), and should do so to prevent spurious test failures.
This is the follow-up to this thread:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/090942.html
llvm-svn: 249161
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
llvm-svn: 249052
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
llvm-svn: 248832
Previously the code added an extra nullptr entry to a static array and then created an ArrayRef with a size one less than the static array. If there were no other entries the array would just contain the nullptr and the ArrayRef would be crated with size 0.
Instead, put the right number of entries in the array and explicitly emit 'None' if the size would be 0. This allows the static array constructor of makeArrayRef to be used.
llvm-svn: 248244
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
Except the changes that defined virtual destructors as =default, because that
ran into problems with GCC 4.7 and overriding methods that weren't noexcept.
llvm-svn: 247298
I've made a range of improvements to the Emacs mode for LLVM IR.
Most importantly, it changes llvm-mode to inherit from prog-mode. This
means llvm-mode will be treated as a normal programming mode in Emacs,
so many Emacs features will just work. prog-mode is new to Emacs 24,
so I've added an alias to ensure compatibility with Emacs 23 too.
I've changed the mode definition to use define-derived-mode. This
saves us needing to set up local variables ourselves, and saves us
needing to define llvm-mode-map, llvm-mode-abbrev-table,
llvm-mode-map.
I've removed the keybindings to tab-to-tab-stop, center-line and
center-paragraph. This shouldn't be llvm-mode's responsibility, and
the code didn't actually work anyway (since `(not llvm-mode-map)`
always evaluated to `t`, the keybindings were never executed).
I've simplified the syntax-table definition, it's equivalent (e.g. `"`
is treated as string delimiter by default in Emacs). I've added `.` as
a symbol constituent, so functions like `llvm.memset.p0i8.i32` are
recognised as a single symbol. I've also changed `%` to be a symbol
constituent, so users can move between words or symbols at their
choice, rather than conflating the two.
I've fixed regexp for types, which incorrect used `symbol` instead of
`symbols` as an argument to `regexp-opt`. This was causing incorrect
highlighting on lines like `call void @foovoid`.
I've removed string and comment highlighting from
`llvm-font-lock-keywords`. This is already handled by the
syntax-table.
Finally, I've removed the reference to jasmin. That project is long
abandoned and the link 404s. For reference, I've found an old copy of
the project here:
https://github.com/stevej/emacs/blob/master/vendor/jasmin/jasmin.el
Patch by Wilfred Hughes!
llvm-svn: 247281
The variable is actually called ANDROID_SERIAL.
This was not exercised on the bots until today.
Should fix the sanitizer-x86_64-linux failures.
llvm-svn: 246898
The plan is to use this for the sanitizer test suite on Windows. See
PR24554 for more details on why we need this.
Tested manually by injecting rand() into a sanitizer test and watching
what it does.
llvm-svn: 246704
Summary:
Add the necessary plumbing so that llvm_token_ty can be used as an
argument/return type in intrinsic definitions and correspondingly require
TokenTy in function types. TokenTy is an opaque type that has no target
lowering, but can be used in machine-independent intrinsics. It is
required for the upcoming llvm.eh.padparam intrinsic.
Reviewers: majnemer, rnk
Subscribers: stoklund, llvm-commits
Differential Revision: http://reviews.llvm.org/D12532
llvm-svn: 246651
I locally hit the 255 limit, but a lot of these are redundant: each
predicate coming from a different record was allocated a new number,
even when we already emitted the same code for another predicate.
Instead, re-use numbers and emit the predicate code only once.
This reduces the total text size of *DAGISel.cpp.o by ~1%.
llvm-svn: 246208
My theory is that somehow Python's refcounting and GC strategy isn't
closing the subprocess handle in a timely fashion. This accesses the
private '_handle' field of the Popen object, but I see no other way to
do this. If this doesn't address the problem on the sanitizer-windows
buildbot, we can revert this change. If it does, then let's keep the
hack.
llvm-svn: 245946
gtest and gtest_main) when generating ``Makefile.llvmbuild``.
Libraries that are not installed should not be exported because they
won't be available from an install tree. Rather than filtering out the
gtest libraries in cmake/modules/Makefile, simply teach llvm-build to
filter out libraries that will not be installed from its generated list
of exported libraries.
Note that LLVMBUILD_LIB_DEPS_* are used during our own CMake build
process so we cannot filter LLVMBUILD_LIB_DEPS_gtest* out in llvm-build.
We must leave this gtest filter logic in cmake/modules/Makefile.
llvm-svn: 245718
Brad King.
Move `LLVM_LIBS_TO_EXPORT` over to Makefile.llvmbuild and generate it
from `llvm-build` using the same logic used to export the dependencies
of these libraries. This avoids depending on `llvm-config`.
This refactoring was originally motivated by issue #24154 due to commit
r243297 (Fix `llvm-config` to emit the linker flag for the combined
shared object, 2015-07-27) changing the output of `llvm-config --libs`
to not have the individual libraries when we configure with
`--enable-shared`. That change was reverted by r244108 but this
refactoring makes sense on its own anyway.
llvm-svn: 245717
Brad King.
The write_cmake_fragment and write_cmake_exports_fragment methods share
some logic for selecting libraries that CMake needs to know about.
Factor it out into a helper to avoid duplication.
llvm-svn: 245716
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
llvm-svn: 244928
While checking for the existence of the clang-tools-extra directory,
the script was not checking for its destination name, "extra", and
the script was failing when re-running without checking out new
sources.
llvm-svn: 243898
Summary:
Mips doesn't implement unw_getcontext() or libunwind::Registers_*::jumpto() yet
so we must disable libunwind for this release.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11563
llvm-svn: 243633
This isn't part of the official release process, but provides a convenient way
to build binaries for those who want to experiment with it. Hopefully the run-
time can be part of the regular build and release process for 3.8.
Differential Revision: http://reviews.llvm.org/D11494
llvm-svn: 243531
This makes the script run to the end and produce tarballs even on test
failures, and then highlights any errors afterwards.
(I first tried just storing the errors in a global variable, but that
didn't work as the "test_llvmCore" function invocation is actually
running as a sub-shell.)
Differential Revision: http://reviews.llvm.org/D11478
llvm-svn: 243116
Ilya Biryukov